src/cpu/o3/thread_context_impl.hh:
Use flattened indices
src/cpu/simple_thread.hh:
Use flattened indices, and pass a thread context to setSyscallReturn rather than a register file.
src/cpu/thread_context.hh:
The SyscallReturn class is no longer in arch/syscallreturn.hh
--HG--
extra : convert_revision : ed84bb8ac5ef0774526ecd0d7270b0c60cd3708e
src/arch/alpha/syscallreturn.hh:
src/arch/mips/syscallreturn.hh:
src/sim/syscallreturn.hh:
Move the SyscallReturn class into sim/syscallreturn.hh
src/arch/sparc/faults.cc:
src/arch/sparc/isa/operands.isa:
src/arch/sparc/isa_traits.hh:
src/arch/sparc/miscregfile.cc:
src/arch/sparc/miscregfile.hh:
src/arch/sparc/process.cc:
src/arch/sparc/sparc_traits.hh:
Move some miscregs into the integer register file so they get renamed.
--HG--
extra : convert_revision : df5b94fa1e7fdca34816084e0a423d6fdf86c79b
Protect other pieces of code so that sparc compiles SE again
src/arch/sparc/SConscript:
Add ua2005.cc back into SConscript
src/arch/sparc/miscregfile.hh:
add functions that deal with priv registers so we don't have to have a bunch of if defs and other ugliness
src/arch/sparc/mmaped_ipr.hh:
wrap handleIpr* with if full_system so it compiles under se
src/arch/sparc/ua2005.cc:
reorganize edit fs only miscreg functions
src/cpu/exetrace.cc:
protect legion code so it doesn't try to compile under se
--HG--
extra : convert_revision : 6b3c9f6f95b4da8544525f4f82e92861383ede76
configs/common/FSConfig.py:
seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
Use instruction count from cpu rather than cycles because that is what legion does
we can change it back after were done with legion
src/base/bitfield.hh:
add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
change asserts of packet success to if panics wrapped with NDEBUG defines
so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
convert some tabs to spaces
src/python/m5/objects/T1000.py:
add more fake devices for each l1 bank and each memory controller
--HG--
extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
Add the ability to use an address mask for symbol loading
Rather then silently failing on platform accesses panic
Move BadAddr/IsaFake no Device from Tsunami
Let the system kernel be none, but warn about it
configs/common/FSConfig.py:
We don't have a kernel for sparc yet
src/arch/sparc/system.cc:
Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
src/base/loader/aout_object.cc:
src/base/loader/aout_object.hh:
src/base/loader/ecoff_object.cc:
src/base/loader/ecoff_object.hh:
src/base/loader/elf_object.cc:
src/base/loader/elf_object.hh:
src/base/loader/object_file.hh:
src/base/loader/raw_object.cc:
src/base/loader/raw_object.hh:
Add the ability to use an address mask for symbol loading
src/dev/sparc/t1000.cc:
Rather then silently failing on platform accesses panic
src/dev/sparc/t1000.hh:
fix up a couple of platform comments
src/python/m5/objects/Bus.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/T1000.py:
src/python/m5/objects/Tsunami.py:
Move BadAddr/IsaFake no Device from Tsunami
src/python/m5/objects/System.py:
Let kernel be none
src/sim/system.cc:
Let the system kernel be none, but warn about it
--HG--
extra : convert_revision : 92f6afef599a3d3c7c5026d03434102c41c7b5f4
into zower.eecs.umich.edu:/eecshome/m5/newmemmid
src/arch/sparc/isa_traits.hh:
src/arch/sparc/miscregfile.hh:
hand merge
--HG--
extra : convert_revision : 34f50dc5e6e22096cb2c08b5888f2b0fcd418f3e
src/arch/SConscript:
add mmaped_ipr.hh to switch headers
src/arch/sparc/asi.hh:
make ASI_IMPLICT=0 so by default nothing needs to be done
src/arch/sparc/miscregfile.hh:
miscregfile no longer needs to include asi.hh
src/arch/sparc/tlb.cc:
src/arch/sparc/tlb.hh:
implement panic instructions for mmaped ipr reads
src/cpu/simple/atomic.cc:
add check for mmaped iprs and handle them if it exists
src/mem/request.hh:
allocate space in the flags for mmaped iprs. Put in in the first 8 bits so that by default its fast. Move the other flags up 8 bits
--HG--
extra : convert_revision : 31255b0494588c4d06a727fe35241121d741b115
Right now this introduces a minor memory leak as old physPorts and virtPorts are not deleted when new ones are created. A flyspray task has been created for this issue. It can not be resolved until we determine how the bus will handle giving out ID's to functional ports that may be deleted.
src/cpu/o3/cpu.cc:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Change the setup of the physPort and virtPort to instead happen every time the CPU has a context activated. This is a little high overhead, but keeps it working correctly when the CPU does not have a physical memory attached to it until it switches in (like the case of switch CPUs).
src/cpu/o3/thread_context.hh:
Change function from being called at init() to just being called whenever the memory ports need to be connected.
src/cpu/o3/thread_context_impl.hh:
Update this to not delete the port if it's the same as the virtPort.
src/cpu/thread_context.hh:
Change function from being called at init() to whenever the memory ports need to be connected.
src/cpu/thread_state.cc:
Instead of initializing the ports, simply connect them, deleting any old ports that might exist. This allows these functions to be called multiple times.
src/cpu/thread_state.hh:
Ports are no longer initialized, but rather connected at context activation time.
--HG--
extra : convert_revision : e399ce5dfbd6ad658c953a7c9c7b69b89a70219e
src/arch/sparc/process.cc:
MachineBytes doesn't exist any more.
src/arch/sparc/regfile.cc:
Add in the miscRegFile for good measure.
src/cpu/o3/isa_specific.hh:
Add in a section for SPARC
src/cpu/o3/sparc/cpu.cc:
src/cpu/o3/sparc/cpu.hh:
src/cpu/o3/sparc/cpu_builder.cc:
src/cpu/o3/sparc/cpu_impl.hh:
src/cpu/o3/sparc/dyn_inst.cc:
src/cpu/o3/sparc/dyn_inst.hh:
src/cpu/o3/sparc/dyn_inst_impl.hh:
src/cpu/o3/sparc/impl.hh:
src/cpu/o3/sparc/params.hh:
src/cpu/o3/sparc/thread_context.cc:
src/cpu/o3/sparc/thread_context.hh:
Sparc version of this file.
--HG--
extra : convert_revision : 34bb5218f802d0a1328132a518cdd769fb59b6a4
src/arch/sparc/SConscript:
Add code to serialize/unserialze tlb entries
src/arch/sparc/asi.cc:
src/arch/sparc/asi.hh:
update asi names for how they're listed in the supplement
add asis
add more asi functions
src/arch/sparc/isa_traits.hh:
move the interrupt stuff and some basic address space stuff into isa traits
src/arch/sparc/miscregfile.cc:
src/arch/sparc/miscregfile.hh:
add mmu registers to tlb
get rid of implicit asi stuff... the tlb will handle it
src/arch/sparc/regfile.hh:
make isnt/dataAsid return ints not asis
src/arch/sparc/tlb.cc:
src/arch/sparc/tlb.hh:
first cut at sparc tlb
src/arch/sparc/vtophys.hh:
pagatable nedes to be included here
src/mem/request.hh:
add asi and if the request is a memory mapped register to the requset object
src/sim/host.hh:
fix incorrect definition of LL
--HG--
extra : convert_revision : 6c85cd1681c62c8cd8eab04f70b1f15a034b0aa3
src/arch/sparc/isa/base.isa:
Fix a constant.
src/arch/sparc/isa/decoder.isa:
Made carry calculation more consistent.
src/arch/sparc/isa/operands.isa:
Use the right constant.
--HG--
extra : convert_revision : 25b3a09ff20d4b8e1a95ee8a983d14ef3cfe73bb
Fix a small writeback bug when missing in the L2 in atomic mode
src/mem/bus.cc:
Fix a comment to make sense
src/mem/cache/cache_impl.hh:
Do a functional access to levels above on a read as a temporary solution for L2's in FS
Also fix a small writeback miss in L2 issue
src/mem/cache/coherence/simple_coherence.hh:
src/mem/cache/coherence/uni_coherence.cc:
src/mem/cache/coherence/uni_coherence.hh:
Do a functional access to levels above on a read as a temporary solution for L2's in FS
tests/quick/00.hello/ref/alpha/linux/o3-timing/m5stats.txt:
tests/quick/00.hello/ref/alpha/linux/simple-timing/m5stats.txt:
tests/quick/01.hello-2T-smt/ref/alpha/linux/o3-timing/m5stats.txt:
Update ref's for writeback changes
--HG--
extra : convert_revision : 937febd577b16b7fd97a5a68acaf53541828a251
src/cpu/o3/alpha/cpu_impl.hh:
Handle the PhysicalPort and VirtualPort in the ThreadState.
src/cpu/o3/cpu.cc:
Initialize the thread context.
src/cpu/o3/thread_context.hh:
Add new function to initialize thread context.
src/cpu/o3/thread_context_impl.hh:
Use code now put into function.
src/cpu/simple_thread.cc:
Move code to ThreadState and use the new helper function.
src/cpu/simple_thread.hh:
Remove init() in this derived class; use init() from ThreadState base class.
src/cpu/thread_state.cc:
Move setting up of Physical and Virtual ports here. Change getMemFuncPort() to connectToMemFunc(), which connects a port to a functional port of the memory object below the CPU.
src/cpu/thread_state.hh:
Update functions.
--HG--
extra : convert_revision : ff254715ef0b259dc80d08f13543b63e4024ca8d
configs/common/FSConfig.py:
Make a SPARC system create an IO bus.
src/python/m5/objects/T1000.py:
Create a T1000 platform
src/arch/sparc/miscregfile.cc:
Initialize the strand status register to the value legion provides.
src/cpu/exetrace.cc:
Truncate an ExtMachInst to a MachInst before comparing with Legion.
--HG--
extra : convert_revision : e4189b572a5297e8362f5bd26d87b74736c8e5f1
src/cpu/simple/timing.cc:
Various updates for deleting requests more properly.
The major change is moving the deletion of the fetch request/packet to after the instruction has executed and completed. This should fix a few bugs because Ron's memory system didn't expect a call for a functional access while a timing access was being processed.
--HG--
extra : convert_revision : c7cf114bb1ff3cdaa7b0a40ed4c5302dc9d3a522
src/mem/bus.cc:
Make it so that invalidates being sent from the responder up don't call the responder
but they should also not Panic.
src/mem/packet.hh:
If we don't have data in the packet, don't call deleteData:
Example: InvalidateRequests never have data.
--HG--
extra : convert_revision : 18766bc9f3bb4d852ac651d094254d347abd1634
make a likewise updateIntrInfo for Sparc that's blank so it doesn't fart on build
src/arch/sparc/interrupts.hh:
make a likewise updateIntrInfo for Sparc that's blank so it doesn't fart on build
--HG--
extra : convert_revision : 5f469d0cf897479b42703104cd801a8ef923fcae
src/mem/bridge.cc:
Update brdiges, now that snoop addresses are properly forwarded.
Bus bridge should only handle snoops on the second phase (SNOOP_COMMIT)
src/mem/bus.cc:
src/mem/bus.hh:
Make sure if a busBridge has access to both things that snoop and things that respond it only takes the request once
--HG--
extra : convert_revision : 26cc9ee4429be45d4476fa435e0e9a54843c2509
src/mem/cache/base_cache.cc:
Sometimes a functional access comes while waiting on a outstanding packet being sent.
This could be because Timing CPU does some post processing on the recvTiming which send functional access.
Either the CPU should leave the pkt/req around (so They can be referenced in the mem system). Or the mem
system should remove them from outstanding lists and reinsert them if they fail in the sendTiming.
I did the later, eventually we should consider doing the former if that is the correct behavior.
--HG--
extra : convert_revision : be41e0d2632369dca9d7c15e96e5576d7583fe6a
src/mem/bus.cc:
Only call snoop once per port, need to fix it so snoop ranges that overlap aren't added to list
Functional accesses that call snoop and it goes to a higher bus may change the src, reset it after each snoop.
--HG--
extra : convert_revision : 7276059c798a85cb9d138ccc5531298ecd055c13
src/mem/bus.cc:
Actually return the snoop list when asked for it.
Don't get stuck in infinite functional loops
--HG--
extra : convert_revision : 8e6dafbd10b30d48d28b6b5d4b464e8e8f6a3ddc
src/cpu/o3/fetch_impl.hh:
Fetch needs to make sure it isn't waiting on an Icache access.
--HG--
extra : convert_revision : b53eb58b9e5a00bdb394134586d1f84f84d1c6e1
src/arch/alpha/interrupts.hh:
No need for this now that the ThreadContext is being used to set these IPRs in interrupts.
Also split up the interrupt checking from the updating of the IPL and interrupt summary.
src/arch/alpha/tlb.cc:
Check the PC for whether or not it's in PAL mode, not the addr.
src/cpu/o3/alpha/cpu.hh:
Split up getting the interrupt from actually processing the interrupt.
src/cpu/o3/alpha/cpu_impl.hh:
Splut up the processing of interrupts.
src/cpu/o3/commit_impl.hh:
Update for ISA-oriented interrupt changes.
src/cpu/o3/fetch_impl.hh:
Fix broken if statement from PcPAL updates, and properly populate the request fields.
Also more debugging output.
src/cpu/ozone/cpu_impl.hh:
Updates for ISA-oriented interrupt stuff.
src/cpu/ozone/front_end_impl.hh:
Populate request fields properly.
src/cpu/simple/base.cc:
Update for interrupt stuff.
--HG--
extra : convert_revision : 9bac3f9ffed4948ee788699b2fa8419bc1ca647c
Fixes for Mem Leak associated with Writebacks.
src/mem/cache/miss/mshr_queue.cc:
Fixes for Mem Leak associated with Writebacks. (Double Delete removed)
--HG--
extra : convert_revision : 7a52ddd57da35995896f2c4438a58aa53f762416
src/mem/cache/cache_impl.hh:
When upgrades change to readEx make sure to allocate the block
Fix dprintf
--HG--
extra : convert_revision : 8700a7e47ad042c8708302620b907849c4bfdded
src/mem/cache/base_cache.cc:
On a delayed response, be sure to call the fixPacket wrapper to toggle hasData flag.
src/mem/packet.cc:
src/mem/packet.hh:
Create a wrapper to toggle the hasData flag on delayed responses
--HG--
extra : convert_revision : 1ced8d4e3dc12a059fb7636d59e429cd3dd46901
src/arch/alpha/faults.hh:
Only use pagetable.hh in FS
src/arch/alpha/pagetable.hh:
pagetable.hh should only be included in FS, so protecting it internally should be unnecessary.
src/cpu/exetrace.cc:
Only use tlb.hh in FS
--HG--
extra : convert_revision : 91ea61f2e7970e7146b6d407ee250fcb20cd4d48
Working on that now.
src/mem/cache/base_cache.cc:
Keep a list of the responders so we can search them on functional accesses.
src/mem/cache/base_cache.hh:
Properly put things on a list for responses so we can search the list.
Also, be sure to check the outgoing ports lists on a functional access (factor some common code out there)
src/mem/cache/cache_impl.hh:
Properly return when the first read hit on a functional access.
Make sure to call to check the other ports list of packets before forwarding it out.
--HG--
extra : convert_revision : 1d21cb55ff29c15716617efc48441329707c088a
src/mem/packet.cc:
Make sure to copy the whole data (we were one byte short)
src/mem/tport.cc:
Fix for the proper semantics of fixPacket
--HG--
extra : convert_revision : 215e05db9099d427afd4994f5b29079354c847d8
use memcpy instead of bcopy
s/u_int32_t/uint32_t/g
fixup endian code to work with solaris
hack to make sure htole() works... Nate, have a good idea to fix this?
src/arch/sparc/faults.cc:
set the reset address to be 40 bits. Makes PC printing easier at least for now.
src/arch/sparc/isa/base.isa:
fix endian issues with condition codes
src/arch/sparc/tlb.hh:
add implemented physical addres constants
src/arch/sparc/utility.hh:
add tlb.hh to utilities
src/base/loader/raw_object.cc:
add a symbol <filename>_start to the symbol table for binaries files
src/base/remote_gdb.cc:
use memcpy instead of bcopy
src/cpu/exetrace.cc:
clean up printing a bit more
src/cpu/m5legion_interface.h:
add tons to the shared interface
src/dev/ethertap.cc:
s/u_int32_t/uint32_t/g
src/dev/ide_atareg.h:
fixup endian code to work with solaris
src/dev/pcidev.cc:
src/sim/param.hh:
hack to make sure htole() works...
--HG--
extra : convert_revision : 4579392184b40bcc1062671a953c6595c685e9b2
Since we don't have a platform yet, you need to comment out the default responder stuff in Bus.py to make it work.
SConstruct:
Add TARGET_ISA to the list of environment variables that end up in the build_env for python
configs/common/FSConfig.py:
add a simple SPARC system to being testing with, you'll need to change makeLinuxAlphaSystem to makeSparcSystem in fs.py for now
src/SConscript:
add a raw file object, at least until we get more info about how to compile openboot properly
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
add parameters for ROM files (OBP/Reset/Hypervisor), a ROM, load files into ROM
src/base/loader/object_file.cc:
src/base/loader/object_file.hh:
add option to try raw when nothing works
src/cpu/exetrace.cc:
cleanup lockstep printing a little bit
src/cpu/m5legion_interface.h:
change the instruction to be 32 bits because it is
src/mem/physical.cc:
fix assert that doesn't work if memory starts somewhere above 0
src/python/m5/objects/BaseCPU.py:
Add if statement to choose between sparc tlbs and alpha tlbs
src/python/m5/objects/System.py:
Add a sparc system that sets the rom addresses correctly
src/python/m5/params.py:
add the ability to add Addr() together
--HG--
extra : convert_revision : bbbd8a56134f2dda2728091f740e2f7119b0c4af
files so the directories can easily be deleted.
Remove the FullCPU from the ALL_CPU_LIST and only add it if
it exists.
--HG--
extra : convert_revision : b16f56bb92a0063803c5099732dc289fe4363768
src/cpu/o3/cpu.cc:
Handle draining properly when CPU isn't actually being used.
src/cpu/simple/atomic.cc:
Be sure to set status properly when draining.
src/mem/bus.cc:
Fix for draining.
--HG--
extra : convert_revision : d9796e6693e974f022159029fc9743c49a970c8f
align the character arrays that are used by placement-new for classes lest we have an unaligned fault on SPARC/Solaris
src/SConscript:
DWARF2 symbol support seems to be broken on Solaris. Use stabs+
src/base/statistics.hh:
align the character arrays that are used by placement-new for classes lest we have an unaligned fault on SPARC/Solaris
--HG--
extra : convert_revision : bc875a4fdfb4553062d3278537bc32a5ab9b6cca
configs/common/Simulation.py:
simplify maxtick code a little bit - instead of checking for -1, just set it at MaxTick.
src/python/m5/__init__.py:
make a new m5 param called MaxTick.
src/sim/host.hh:
fix the M5 def. of MaxTick
src/sim/main.cc:
Simplify the MaxTick/num_cycles parsing within main.cc
--HG--
extra : convert_revision : f800addfbc1323591c2e05b892276b439b671668
src/python/m5/objects/BaseCPU.py:
These parameters should have been removed in an earlier push.
--HG--
extra : convert_revision : 781b39ca370361e9568b1af0be96ff5848b1f3f4
into zeep.eecs.umich.edu:/home/gblack/m5/newmemmemops
src/arch/sparc/faults.hh:
Hand merged.
--HG--
extra : convert_revision : 1bcefe47fa98e878a0dfbcfa5869b5b171927911
src/mem/bus.cc:
Fix up draining to work properly.
src/mem/bus.hh:
Initialize drainEvent to NULL.
src/mem/cache/base_cache.cc:
src/mem/cache/base_cache.hh:
Add draining to the caches.
--HG--
extra : convert_revision : 3082220a75d50876f10909f9f99bec535889f818
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
No need for specialized init() function any more.
src/python/m5/objects/Tsunami.py:
Override responder when set by user. This avoids having bus.responder floating around and not doing anything when the user has specified their own default responder.
--HG--
extra : convert_revision : c547daf15b23a889c98e62bfd53c293c85d7a041
src/cpu/o3/mem_dep_unit_impl.hh:
Initialize mem dep unit properly, add debug output.
--HG--
extra : convert_revision : 3c56dedfa57de1edc4b1c8f8d9bc94e18002eff2
SConstruct:
Put the code to make a switching header directory into a function so they are easy to make.
src/arch/SConscript:
Replace switching header code with the new function call.
src/kern/SConscript:
Created a new switching header directory in kern, and moved the declaration of some source files here.
--HG--
rename : src/kern/kernel_stats.cc => src/kern/base_kernel_stats.cc
rename : src/kern/kernel_stats.hh => src/kern/base_kernel_stats.hh
extra : convert_revision : 98f5320a5ade567c3e4f67fef123dfb0c5122545
src/SConscript:
remove pcifake and tsunami fake from sconscript
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
combine badaddr and isa fake into one
src/python/m5/objects/Pci.py:
remove pcifake
src/python/m5/objects/Tsunami.py:
make badaddr derive from isafake
--HG--
extra : convert_revision : 91470db60aa1de6b85827304e27bd3414cc9d8d1
src/cpu/base.cc:
Move clock phase drift code to the base CPU so that any CPU model can use it.
src/cpu/base.hh:
Added two functions to help get the next cycle the CPU should be scheduled.
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Use the function now in BaseCPU.
--HG--
extra : convert_revision : 444494b66ffc85fc473c23f57683c5f9458ad80c
SConstruct:
Add check to see if we need to include libsocket
src/arch/sparc/floatregfile.cc:
src/arch/sparc/intregfile.cc:
use memset rather than bzero and include the appropriate headerfile
src/base/pollevent.cc:
If we're compling under solaris we need sys/file.h
src/base/random.cc:
src/base/random.hh:
solaris doesn't have random(), so use rint with the correct rounding mode
if we're compiling on solaris
src/base/stats/flags.hh:
u_int32_t??
src/base/time.hh:
grab the timersub() define from freebsd since it doesn't exist in solaris
src/cpu/inst_seq.hh:
we don't need to include stdint here
src/sim/byteswap.hh:
the method to detect endianness on Solaris is a little more complex...
--HG--
extra : convert_revision : 6b7db0e900e7bccfc250d65c125065f27280dda1
src/arch/sparc/faults.cc:
Moved some code here from miscregfile.cc
src/arch/sparc/miscregfile.cc:
Moved code from here to faults.cc, and merged (read|set)MiscRegWithEffect and it's FS version from ua2005.cc
src/arch/sparc/miscregfile.hh:
readFSRegWithEffect is no longer a seperate function, and is instead done in the main readRegWith Effect.
--HG--
extra : convert_revision : 0b45f0f78e83929b32ddd2f443c8b1dbf9bc04fb
src/mem/bus.cc:
src/mem/bus.hh:
Bus now will be setup with a default responder, unless the user overrides it. This default responder should return BadAddress if no matching port is found.
src/python/m5/objects/Bus.py:
Bus now has a default responder for FS mode if the user doesn't override it. It returns BadAddress if no matching port is found.
src/python/m5/objects/Tsunami.py:
Add bad address device. Also record when the user has specified their own default responder.
--HG--
extra : convert_revision : 59070477ae313ee711b2d59baa2369c9a91c5b85
src/mem/cache/base_cache.cc:
Have caches return a new functional port whenever asked for them. I'm pretty sure this is desired behavior. Ron can correct me if it's not.
--HG--
extra : convert_revision : e1fadf895a7d714968128ff900d10e86fde53387
src/cpu/simple_thread.cc:
Fix up port handling to share code.
src/cpu/thread_state.cc:
Separate code off into a function.
src/cpu/thread_state.hh:
Make a separate function that will get the CPU's memory's functional port.
--HG--
extra : convert_revision : 96a9bb3c5e4b9ba5511678c0fd17f0017c8cd312
src/cpu/simple_thread.cc:
This function should have been deleted from an earlier push.
src/cpu/simple_thread.hh:
Delete this function; it's now in thread_state.hh/.cc.
--HG--
extra : convert_revision : f78dcf9c2b388418030d48d0ea4911c8b8b1f5ff
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix
configs/example/fs.py:
configs/example/se.py:
src/mem/tport.hh:
Hand merge.
--HG--
extra : convert_revision : b9df95534d43b3b311f24ae24717371d03d615bf
configs/example/fs.py:
configs/example/se.py:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.cc:
src/cpu/thread_state.hh:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
No need for mem parameter any more.
src/cpu/checker/cpu.cc:
Use new constructor for simple thread (no more MemObject parameter).
src/cpu/checker/cpu.hh:
Remove MemObject parameter.
src/cpu/memtest/memtest.hh:
Ports now take in their MemObject owner.
src/cpu/o3/alpha/cpu_builder.cc:
Remove mem parameter.
src/cpu/o3/alpha/cpu_impl.hh:
Remove memory parameter and clean up handling of TranslatingPort.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/params.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/atomic.cc:
Remove memory parameter.
--HG--
extra : convert_revision : 43cb44a33b31320d44b69679dcf646c0380d07d3
src/cpu/simple/atomic.hh:
Port now takes in the MemObject that owns it.
src/cpu/simple/timing.hh:
Port now takes in MemObject that owns it.
src/dev/io_device.cc:
src/mem/bus.hh:
Ports now take in the MemObject that owns it.
src/mem/cache/base_cache.cc:
Ports now take in the MemObject that own it.
src/mem/port.hh:
src/mem/tport.hh:
Ports now optionally take in the MemObject that owns it.
--HG--
extra : convert_revision : 890a72a871795987c2236c65937e06973412d349
src/cpu/simple/base.cc:
Make a microcoded op start at the current micropc, rather than starting at 0.
src/cpu/thread_state.cc:
Serialize the microPC and nextMicroPC
--HG--
extra : convert_revision : 5302215f17312ecef3ff4c6548acb05297ee4ff6
src/arch/sparc/isa/decoder.isa:
Fix up the casa and casxa instructions.
src/arch/sparc/isa/formats/formats.isa:
This is handled in loadstore.isa now
src/arch/sparc/isa/formats/mem/basicmem.isa:
src/arch/sparc/isa/formats/mem/blockmem.isa:
Renamed doSplitExecute to doDualSplitExecute. This differentiates between the version that does both a register and immediate version, and one that just does a register version.
src/arch/sparc/isa/formats/mem/mem.isa:
The cas format is handled in loadstore.isa as well now.
src/arch/sparc/isa/formats/mem/util.isa:
Reorganized things a bit to better support cas
--HG--
extra : convert_revision : 12411e89e763287e52f9825bf7a417b263c1037f
src/arch/sparc/isa/formats/priv.isa:
Fix the priv format so that it uses isa_parser operands rather than accessing the registers directly in checkCode. Also, the expressions needed to be negated.
src/arch/sparc/isa/operands.isa:
Added an Hpstate operand, and adjusted the numbering.
--HG--
extra : convert_revision : 4a70862df061aa9e1b9eab125c4c2fc839ac3b5a
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
Added a function to do normal SPARC trap processing, and implemented the spill and fill faults for SE
src/arch/sparc/process.cc:
src/arch/sparc/process.hh:
Added fill and spill handlers which are stuffed into the processes address space. The location of these handlers are stored in fillStart and spillStart.
--HG--
extra : convert_revision : 59adb96570cce86f373fbc2c3e4c05abe1742d3b
src/cpu/base_dyn_inst.hh:
Extend BaseDynInst a little bit so it can be use as a TC as well (specifically for ll/sc code).
src/cpu/base_dyn_inst_impl.hh:
Add variable to track if the result of the instruction should be recorded.
src/cpu/o3/alpha/cpu_impl.hh:
Clear lock flag upon hwrei.
src/cpu/o3/lsq_unit.hh:
Use ISA specified handling of locked reads.
src/cpu/o3/lsq_unit_impl.hh:
Use ISA specified handling of locked writes.
--HG--
extra : convert_revision : 1f5c789c35deb4b016573c02af4aab60d726c0e5
not necessarily 100% there yet.
src/mem/cache/cache_impl.hh:
Generate response packet on failed store conditional.
src/mem/packet.hh:
Clear packet flags when reinitializing.
(SATISFIED in particular is one we don't want to leave set.)
--HG--
extra : convert_revision : 29207c8a09afcbce43f41c480ad0c1b21d47454f
src/sim/faults.cc:
Fix fault message.
src/kern/tru64/tru64.hh:
Add DPRINTF to see where new thread stacks are allocated.
src/arch/alpha/faults.cc:
Add print statement so we know what the faulting address is in SE mode.
--HG--
extra : convert_revision : 6eb2b513c339496a0d013b7e914953a0a066c12d
running SCons, make it into a sticky option that can be
overridden at build time, and set it up before the interpreter
is started. Also, fix the code that turns sticky options into
config/*.hh so that it works with types other than bool.
--HG--
extra : convert_revision : 602398b35d4da4e813f78865678ed348fdea7270
Fix fixPacket assert function.
Stop timing port from forwarding the request if a response was found in its queue on a read.
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/python/m5/objects/MemTest.py:
Add parameter to configure what percentage of mem accesses are functional
src/mem/cache/base_cache.cc:
src/mem/cache/cache_impl.hh:
Use fix Packet function
src/mem/packet.cc:
Fix an assert that was checking the wrong thing
src/mem/tport.cc:
Properly detect if we need to do the access to the functional device
--HG--
extra : convert_revision : 447cc1a9a65ddd2a41e937fb09dc0e7c74e9c75e
I need to move over to using the fixPacket function so I don't have to make the same changes everywhere.
Still a functional access bug someplace I need to track down in timing mode.
src/mem/cache/base_cache.cc:
src/mem/cache/cache_impl.hh:
Fix corner case on assertion
tests/configs/memtest.py:
Updated memtester with uncacheable addresses and functional accesses
--HG--
extra : convert_revision : e6fa851621700ff9227b83cc5cac20af4fc8444f
src/cpu/memtest/memtest.cc:
Fix memtest to do functional accesses
src/mem/cache/cache_impl.hh:
Fix cache to handle functional accesses properly based on memtester changes
Still need to fix functional accesses in timing mode now that the memtester can test it.
--HG--
extra : convert_revision : a6dbca4dc23763ca13560fbf5d41a23ddf021113
?? doesn't compile in warn statements
Should have been false, where I had a true.
src/cpu/o3/lsq_impl.hh:
Apparently you can't have ?? in a warn statement (Something about trigraphs)
src/mem/cache/cache_impl.hh:
Forgot to signal atomic mode in snoopProbe
--HG--
extra : convert_revision : c75cb76e193e852284564993440c8ea39e6de426
Now to try L2 caches in FS.
src/mem/cache/base_cache.hh:
Fix uni-coherence for atomic accesses in coherence protocol access to port
src/mem/cache/cache_impl.hh:
Properly handle uni-coherence
src/mem/cache/coherence/simple_coherence.hh:
Properly forward invalidates (not done for MSI+ protocols (assumed top level for now)
src/mem/cache/coherence/uni_coherence.cc:
src/mem/cache/coherence/uni_coherence.hh:
Properly forward invalidates in atomic/timing uni-coherence
--HG--
extra : convert_revision : f0f11315e8e7f32c19d92287f6f9c27b079c96f7
src/mem/cache/cache_impl.hh:
Get the read data from the highest level of cache on a functional access
--HG--
extra : convert_revision : 7437ac46fb40f3ea3b42197a1aa8aec62af60181
that tracing gets turned on as the very first thing
in the selected cycle (tick).
--HG--
extra : convert_revision : c08f749ca42782af1b48e5aa5f0860bf7076bd3c
configs/example/fs.py:
Add MOESI protocol to caches (uni coherence not quite working w/FS yet).
--HG--
extra : convert_revision : 7bef7d9c5b24bf7241cc810df692408837b06b86
src/cpu/exetrace.cc:
Fixed up to deal with microcode, and to make floating point register numbers correlate to the numbers used in SPARC.
util/statetrace/arch/tracechild_sparc.cc:
util/statetrace/arch/tracechild_sparc.hh:
Make floating point register numbers correlate to the numbers used in SPARC.
--HG--
extra : convert_revision : 878897292f696092453cf61d6eac2d1c407ca13b
src/python/m5/SimObject.py:
how did i not commit this already? the other way doesn't seem to work.
--HG--
extra : convert_revision : 55737d3d10742a1913a376d1febbc5809f2fab8f
configs/example/fs.py:
Add flag for MP server systems.
src/python/m5/objects/AlphaConsole.py:
src/python/m5/objects/IntrControl.py:
Change CPU from 'any' to 'cpu[0]' to work better with MP sytems.
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-timing-dual.py:
Don't need to set console & intrcontrol cpu
params anymore (default is fixed now).
--HG--
extra : convert_revision : 9417b12b1b395ff7d6a9f2894e4123923c754daf
Still a bug in atomic uni-coherence in FS.
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Make CPU models handle coherence requests
src/mem/cache/base_cache.cc:
Properly signal coherence CSHRs
src/mem/cache/coherence/uni_coherence.cc:
Only deallocate once
--HG--
extra : convert_revision : c4533de421c371c5532ee505e3ecd451511f5c99
Still need to rework upgrades into this system, but works for now.
src/mem/cache/base_cache.cc:
Re order code to be more readable
src/mem/cache/base_cache.hh:
Be sure to delete the copy on a bus block
src/mem/cache/cache_impl.hh:
Be sure to remove the copy on a writeback success
src/mem/cache/miss/mshr_queue.cc:
Demorgans to make it easier to understand
src/mem/tport.cc:
Delete writebacks
--HG--
extra : convert_revision : 9519fb37b46ead781d340de29bb342a322a6a92e
Still need to fix upgrades to use this path
src/mem/cache/base_cache.cc:
Copy the pkt to the MSHR before issuing the sendTiming where it may be changed/consumed
src/mem/cache/cache_impl.hh:
Use copy of packet, because sendTiming may have changed the pkt
Also, delete the copy when the time comes
--HG--
extra : convert_revision : 635cde6b4f08d010affde310c46b1caf50fbe424
src/arch/sparc/isa/formats/blockmem.isa:
Several small and medium bug fixes.
src/cpu/simple/base.cc:
Fixed a few compiler errors and made sure the next micro pc is set to 1 to prevent the first microop from executing twice. Also fixed a fetching bug.
src/cpu/thread_state.cc:
Made sure the microPC and nextMicroPC are initialized properly.
--HG--
extra : convert_revision : a0fc8aa18d1ade916f17c557181a793c6108a8af
src/arch/sparc/isa/base.isa:
src/arch/sparc/isa/formats/micro.isa:
Switch MachInst to ExtMachInst so that the EXT_ASI field is available to the instructions.
src/arch/sparc/utility.hh:
Made sure EXT_ASI was set to the appropriate ASI value whether or not the asi register was used.
--HG--
extra : convert_revision : cc4363dfe7da81969959cec9d5ad48528edeb8ce
src/arch/isa_parser.py:
Changed the way the extra template parameters are specified. MIPS might need to be adjusted.
src/arch/sparc/isa/decoder.isa:
Changed how Frd_N was set up.
src/arch/sparc/isa/formats/blockmem.isa:
Fixed up handling of block memory operations
src/arch/sparc/isa/formats/integerop.isa:
src/arch/sparc/isa/formats/mem.isa:
src/arch/sparc/isa/formats/priv.isa:
Fix up extra template parameters.
--HG--
extra : convert_revision : ebf850d192193521bb84ca36b577051f74338d23
src/cpu/o3/fetch_impl.hh:
Move assertion to area where it should really always be true. Sometimes you might recvRetry and not necessarily be blocked (if there was a squash).
--HG--
extra : convert_revision : 76ad35357e7f4c44fa544ffed071096a62053018
Fix CSHR's for flow control.
Fix for Bus Bridges reusing packets (clean flags up)
Now both timing/atomic caches with MOESI in UP fail at same point.
src/dev/io_device.hh:
DMA's should send WriteInvalidates
src/mem/bridge.cc:
Reusing packet, clean flags in the packet set by bus.
src/mem/cache/base_cache.cc:
src/mem/cache/base_cache.hh:
src/mem/cache/cache.hh:
src/mem/cache/cache_impl.hh:
src/mem/cache/coherence/simple_coherence.hh:
src/mem/cache/coherence/uni_coherence.cc:
src/mem/cache/coherence/uni_coherence.hh:
Fix CSHR's for flow control.
src/mem/packet.hh:
Make a writeInvalidateResp, since the DMA expects responses to it's writes
--HG--
extra : convert_revision : 59fd6658bcc0d076f4b143169caca946472a86cd
into zed.eecs.umich.edu:/z/hsul/work/m5/newmem
src/cpu/simple/timing.cc:
hand merge
--HG--
extra : convert_revision : 083bf102249ad9bc63c447dbf85d3863f935f647
src/arch/sparc/isa/bitfields.isa:
Added a field to retrieve the asi from the ExtMachInst
src/arch/sparc/isa/decoder.isa:
Fixed up how the size of memory operations where handled, and use the new EXT_ASI bit field.
src/arch/sparc/isa/formats.isa:
add includes for the new formats.
src/arch/sparc/isa/formats/basic.isa:
Add a template for BasicDecodeWithMnemonic which is needed by the unimp format.
src/arch/sparc/isa/formats/mem.isa:
Change around the memory format to figure out the memory access width on its own.
src/arch/sparc/isa/operands.isa:
Added support for the operands of block loads/stores which are offset from Frd.
src/arch/sparc/utility.hh:
Encoded the ASI into the ExtMachInst
--HG--
extra : convert_revision : 5c6026a07e3a919e738d27f78beb0faf6b060643
fixPacket() should be used anywhere a functional packet and timing packet are found to have the same address.
--HG--
extra : convert_revision : 783ec438271b24ddb0ae742b4efd1ed7d6be93f3
src/mem/cache/base_cache.hh:
Remove top level param from cache
src/mem/cache/coherence/uni_coherence.cc:
Remove top level parameters from the cache
--HG--
extra : convert_revision : 4437aeedc20866869de7f9ab123dfa7baeebedf0
implement fix packet and add the ability to print a packet to a ostream
remove tabs in packet.hh (Could people stop inserting them??!?!?!)
mark const functions in packet.hh as such
src/base/traceflags.py:
add a traceflag for functional accesses
src/mem/packet.cc:
implement fix packet and add the ability to print a packet to a ostream
src/mem/packet.hh:
add the ability to print a packet to an ostream
remove tabs in file
mark const functions as such
--HG--
extra : convert_revision : 4297bce5e1d3abbab48be5bd9eb9e982b751fc7c
The response queue is not tying up an MSHR, should we change that or assume infinite storage for responses?
src/mem/cache/base_cache.cc:
src/mem/tport.cc:
Add in functional check of retry queued packets.
--HG--
extra : convert_revision : 0cb40b3a96d37a5e9eec95312d660ec6a9ce526a
src/base/traceflags.py:
src/mem/physical.cc:
Add debug falgs fro physical memory accesses
src/mem/cache/cache_impl.hh:
Snoops to uncacheable blocks should not happen
src/mem/cache/miss/miss_queue.cc:
Set the size properly on unCacheable accesses
--HG--
extra : convert_revision : fc78192863afb11fc7c591fba169021b9e127d16
Fix a segfault associated with DefaultId
src/mem/bus.cc:
Handle a segfault in the bus when DefaultPort was being used
src/mem/bus.hh:
Make the Default ID more unique (it overlapped with Broadcast ID)
--HG--
extra : convert_revision : 9182805c5cf4d9fe004e6c5be8547a8f41ed7bfe
src/mem/bus.cc:
Add debugging statement
src/mem/bus.hh:
Fix implementation of bus for subsequent recvTimings while handling a retry request.
src/mem/tport.cc:
Rework timing port to retry properly
--HG--
extra : convert_revision : fbfb5e8b4a625e49c6cd764da1df46a4f336b1b2
src/python/m5/SimObject.py:
now that setMemoryMode is a method in System, need to convert the SimObject * _ccObject into a system ptr to call setMemoryMode.
src/sim/main.cc:
need this conversion now.
src/sim/sim_object.hh:
put the enum back into SimObject.
src/sim/system.hh:
memoryMode is now a part of SimObject, need the ::'s
--HG--
extra : convert_revision : 0ade06957fa57b497798e1f50c237ca1badc821d
src/cpu/simple/atomic.cc:
memory mode assertion change so that it only goes off if it's supposed to.
src/cpu/simple/timing.cc:
some drain changes (kevin's) and some changes to memoryMode assertions so that they don't go off when they're not supposed to.
--HG--
extra : convert_revision : 007d8610f097e08f01367b905ada49f93cf37ca3
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
Make Memtester able to test atomic as well
src/mem/bus.cc:
src/mem/bus.hh:
Handle atomic snoops properly for cache->cache transfers
src/mem/cache/cache_impl.hh:
Debug output.
Clean up memleak in atomic mode.
Set hitLatency.
Still need to send back reasonable number for atomic return value.
src/mem/packet.cc:
Add command strings for new commands
src/python/m5/objects/MemTest.py:
Add param to test atomic memory.
--HG--
extra : convert_revision : 43f880e29215776167c16ea90793ebf8122c785b
Fix bug with deadlocking
src/mem/cache/base_cache.cc:
Make sure to not wait anymore
--HG--
extra : convert_revision : 5f7b44a1c475820b9862275a0d6113ec2991735d
src/mem/cache/base_cache.cc:
When turning asserts into if's don't forget to invert.
Must be too sleepy.
--HG--
extra : convert_revision : ea38d5a4b4ddde7b5266b3b2c83bbc256218af9a
src/base/traceflags.py:
Add new flags for cacheport
src/mem/bus.cc:
Add debugging info
src/mem/cache/base_cache.cc:
Add debuggin info
--HG--
extra : convert_revision : a6c4b452466a8e0b50a86e886833cb6e29edc748
Update retry mechanism
src/mem/cache/base_cache.cc:
Rework the retry mechanism
src/mem/cache/base_cache.hh:
Rework the retry mechanism
Try to fix memory bug
src/mem/cache/cache_impl.hh:
Rework upgrades to not be blocked by slave
src/mem/cache/miss/mshr_queue.cc:
Fix mem leak on writebacks
--HG--
extra : convert_revision : 3cec234ee441edf398ec8d0f51a0c5d7ada1e2be
into zazzer.eecs.umich.edu:/z/rdreslin/m5bk/newmemcleanest
src/mem/packet.hh:
Hand merge code
--HG--
extra : convert_revision : d659418f24f4f4bf9867fec8573a5d227c0dfcea
src/mem/cache/base_cache.cc:
Fix a bug about not having a request to send
src/mem/cache/base_cache.hh:
Fix a bug with the blocking code
src/mem/cache/cache.hh:
AFix a bug with snoop hits in WB buffer
src/mem/cache/cache_impl.hh:
Fix a bug with snoop hits in WB buffer
Also, add better DPRINTF's
src/mem/cache/miss/miss_queue.cc:
Fix a bug with upgrades (Need to clean it up later)
src/mem/cache/miss/mshr.cc:
Fix a memory leak bug, still some outstanding with writebacks not being deleted
src/mem/cache/miss/mshr_queue.cc:
Fix a bug about upgrades (need to clean up later)
src/mem/packet.hh:
Fix for newly added cmd attribute for upgrades
tests/configs/memtest.py:
More interesting testcase
--HG--
extra : convert_revision : fcb4f17dd58b537bb4f67a8c835f50e455e8c688
src/mem/bus.cc:
Put back the check to see if the bus is busy. Also, populate the fields in the packet to indicate when the first word and the entire packet will be delivered.
src/mem/bus.hh:
Remove the occupyBus function.
src/mem/packet.hh:
Added fields to the packet to indicate when the first chunk of a packet arrives, and when the entire packet arrives.
--HG--
extra : convert_revision : cfc7670a33913d48a04d02c6d2448290a51f2d3c
into zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/cpu/simple/timing.hh:
tests/configs/o3-timing-mp.py:
Hand merge.
--HG--
extra : convert_revision : a58cc439eb5e8f900d175ed8b5a85b6c8723e558
src/cpu/o3/cpu.cc:
Comment out reseting CPU structures for now. This can be updated to work in the future.
--HG--
extra : convert_revision : bc1a86e2fe47da5acb14ba8b64568b0355431f1c
Not fully implemented yet, but good enough for single level cache coherence
src/mem/packet.hh:
Add a bit to distinguish invalidates and upgrades
--HG--
extra : convert_revision : 5bf50d535857cea37fbdaf7993915d1332cb757e
Remove some dead code.
src/mem/cache/cache_impl.hh:
Upgrades don't need a response.
Moved satisfied check into bus so removed some dead code.
src/mem/cache/coherence/coherence_protocol.cc:
src/mem/packet.hh:
Upgrades don't require a response
--HG--
extra : convert_revision : dee0440ff19ba4c9e51bf9a47a5b0991265cfc1d
src/cpu/memtest/memtest.cc:
Fix functional return path
src/cpu/memtest/memtest.hh:
Add snoop ranges in
src/mem/cache/base_cache.cc:
Properly signal NACKED
src/mem/cache/cache_impl.hh:
Catch nacked packet and panic for now
--HG--
extra : convert_revision : 59a64e82254dfa206681c5f987e6939167754d67
src/mem/bus.cc:
Fixes to the previous hand merging, and put the snooping back into recvTiming and out of it's own function.
src/mem/bus.hh:
Put snooping back into recvTiming and not in it's own function.
--HG--
extra : convert_revision : fd031b7e6051a5be07ed6926454fde73b1739dc6
src/mem/physical.cc:
Update comment to match memtest use
src/python/m5/objects/PhysicalMemory.py:
Make memtester have a way to connect functionally
tests/configs/memtest.py:
Properly create 8 memtesters and connect them to the memory system
--HG--
extra : convert_revision : e5a2dd9c8918d58051b553b5c6a14785d48b34ca
src/mem/cache/cache_impl.hh:
Add more usefull DPRINTF's
REmove the PC to get rid of asserts
--HG--
extra : convert_revision : 3f6d832b138d058dbe79bb5f42bd2db9c50b35b5
Don't use the senderState after you get a succesful sendTiming. Not guarnteed to be correct
src/mem/cache/base_cache.cc:
src/mem/cache/base_cache.hh:
src/mem/cache/cache.hh:
src/mem/cache/cache_impl.hh:
src/mem/cache/miss/blocking_buffer.cc:
src/mem/cache/miss/blocking_buffer.hh:
src/mem/cache/miss/miss_queue.hh:
Don't use the senderState after you get a succesful sendTiming. Not guarnteed to be correct
--HG--
extra : convert_revision : 2e8e812bf7fd3ba2b4cba7f7173cb41862f761af
src/cpu/checker/thread_context.hh:
Checker's TC should only copy state, and not fully take over from the old context (prevents it from accidentally stealing the quiesce event).
--HG--
extra : convert_revision : 5760f9c5bae749f8d1df35e4c898df13e41b0224
src/cpu/SConscript:
Add memtester to the compilation environment.
Someone who knows this better should make the MemTest a cpu model parameter.
For now attached with the build of o3 cpu.
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
Update Memtest for new mem system
src/python/m5/objects/MemTest.py:
Update memtest python description
--HG--
extra : convert_revision : d6a63e08fda0975a7abfb23814a86a0caf53e482
src/dev/ide_ctrl.cc:
this range change needs to be done for all pio devices, not just the ide.
src/dev/pcidev.cc:
range change needs to be done at here, not in the ide_ctrl file.
--HG--
extra : convert_revision : 60c65c55e965b02d671dba7aa8793e5a81f40348
src/cpu/simple/atomic.cc:
add in serialization of AtomicSimpleCPU _status. Kev says that this will break uniform serialization across CPUs since each type of CPU has its own "status" enum set. So, the repercussions are that if you serialize in this CPU, you must first unserialize in this CPU before switching to something else you want.
--HG--
extra : convert_revision : 7000f660aecea6fef712bf81853d9a7b90d625ee
src/mem/cache/cache_impl.hh:
Fix a error case by putting a panic in.
Make sure to propogate sendFunctional calls with functional not atomic.
--HG--
extra : convert_revision : 05d03f729a40cfa3ecb68bcba172eb560b24e897
If the cpu needs to update any state when it gets a functional write (LSQ??)
then that code needs to be written.
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
CPU's can recieve functional accesses, they need to determine if they need to do anything with them.
src/mem/bus.cc:
src/mem/bus.hh:
Make the fuctional path do the correct tye of snoop
--HG--
extra : convert_revision : 70d09f954b907a8aa9b8137579cd2b06e02ae2ff
into zeep.eecs.umich.edu:/home/gblack/m5/newmem_bus
src/mem/bus.cc:
Hand merged. Needs to be fixed
--HG--
extra : convert_revision : df03219ccfd18431cc726a063bd29d30554944a1
Fix an issue with memory handling writebacks.
src/mem/cache/base_cache.hh:
src/mem/tport.cc:
Only respond if the pkt needs a response.
src/mem/physical.cc:
Make physical memory respond to writebacks, set satisfied for invalidates/upgrades.
--HG--
extra : convert_revision : 7601987a7923e54a6d1a168def4f8133d8de19fd
src/mem/bus.cc:
src/mem/bus.hh:
minor fix and some formatting changes
src/python/m5/objects/Bus.py:
changed bits to bytes
--HG--
extra : convert_revision : dcd22205604b7a2727eaf2094084c4858f3589c5
and PhysicalMemory. *No* support for caches or O3CPU.
Note that properly setting cpu_id on all CPUs is now required
for correct operation.
src/arch/SConscript:
src/base/traceflags.py:
src/cpu/base.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/request.hh:
src/python/m5/objects/BaseCPU.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
Implement Alpha LL/SC support for SimpleCPU (Atomic & Timing)
and PhysicalMemory. *No* support for caches or O3CPU.
--HG--
extra : convert_revision : 6ce982d44924cc477e049b9adf359818908e72be
configs/common/FSConfig.py:
configs/common/SysPaths.py:
configs/example/fs.py:
configs/example/se.py:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
Clean up configs by removing FullO3Config and instead using default values.
src/python/m5/objects/FUPool.py:
Add in default FUPool.
src/python/m5/objects/O3CPU.py:
Use defaults better. Also set checker parameters, and fix up a config bug.
--HG--
extra : convert_revision : 5fd0c000143f4881f10a9a575c3810dc97cb290b
src/cpu/simple/timing.cc:
Record numCycles stat properly.
src/cpu/simple/timing.hh:
Extra variable to help record numCycles stat.
--HG--
extra : convert_revision : 343311902831820264878aad41dc619999726b6b
src/cpu/o3/commit_impl.hh:
Fixes for compile and sampling.
src/cpu/o3/cpu.cc:
Deallocate and activate threads properly. Also hopefully fix being able to use caches while switching over.
src/cpu/o3/cpu.hh:
Fixes for deallocating and activating threads.
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_unit.hh:
Handle getting back a BadAddress result from the access.
src/cpu/o3/iew_impl.hh:
More debug output.
src/cpu/o3/lsq_unit_impl.hh:
Fixup store conditional handling (still a bit of a hack, but works now).
Also handle getting back a BadAddress result from the access.
src/cpu/o3/thread_context_impl.hh:
Deallocate context now records if the context should be fully removed.
--HG--
extra : convert_revision : 55f81660602d0e25367ce1f5b0b9cfc62abe7bf9
src/SConscript:
Include MemTest for now. It's not complete but it compiles so it shouldn't mess anything else up.
--HG--
extra : convert_revision : 15a610c855b677fdced817850c92e4c911cf6d1c
For now, responses have priority over requests (may want to revist this).
src/mem/cache/base_cache.cc:
src/mem/cache/base_cache.hh:
Add mechanism for caches to handle failure of the fast path on responses.
--HG--
extra : convert_revision : 01524c727d1bb300cc21bdc989eb862ec8bf0b7a
src/mem/cache/cache_impl.hh:
Make sure to pop the list. Fixes infinite writeback bug.
src/mem/cache/miss/mshr_queue.cc:
Add an assert as sanity check in case .full() stops working again.
--HG--
extra : convert_revision : d847e49a397eeb0b7c5ac060fcfc3eaeac921311
Make new_page() check for an out of memory condition
src/sim/system.cc:
Make new_page() check for an out of memory condition
--HG--
extra : convert_revision : daee82788464fca186eb24285b5f43c9fabc25b3
Fix so that blocking for the same reason doesn't fail. I.E. multiple writebacks want to set the blocked flag.
src/mem/cache/miss/blocking_buffer.cc:
src/mem/cache/miss/miss_queue.cc:
src/mem/cache/miss/mshr.cc:
Remove threadnum from cache everywhere for now
--HG--
extra : convert_revision : 7890712147655280b4f1439d486feafbd5b18b2b
1) return the periodicity of checkpoints back into the code (i.e. make m5 checkpoint n m meaningful again).
2) to do this, i had to much around with being able to repeatedly schedule and SimLoopExitEvent, which led to changes in how exit simloop events are handled to make this easier.
src/arch/alpha/isa/decoder.isa:
src/mem/cache/cache_impl.hh:
modify arg. order for new calling convention of exitSimLoop.
src/cpu/base.cc:
src/sim/main.cc:
src/sim/pseudo_inst.cc:
src/sim/root.cc:
now, instead of creating a new SimLoopExitEvent, call a wrapper schedExitSimLoop which handles all the default args.
src/sim/sim_events.cc:
src/sim/sim_events.hh:
src/sim/sim_exit.hh:
add the periodicity of checkpointing back into the code.
to facilitate this, there are now two wrappers (instead of just overloading exitSimLoop). exitSimLoop is only for exiting NOW (i.e. at curTick), while schedExitSimLoop schedules and exit event for the future.
--HG--
extra : convert_revision : c61f4bf05517172edd2c83368fd10bb0f0678029
And small other tweaks to snooping coherence.
src/mem/cache/base_cache.hh:
Make timing response at the time of send.
src/mem/cache/cache.hh:
src/mem/cache/cache_impl.hh:
Update probe interface to be bi-directional for functional accesses
src/mem/packet.hh:
Add the function to create an atomic response to a given request
--HG--
extra : convert_revision : 04075a117cf30a7df16e6d3ce485543cc77d4ca6
Still need:
-Handle NACK's on the recieve side
-Distinguish top level caches
-Handle repsonses from caches failing the fast path
-Handle BusError and propogate it
-Fix the invalidate packet associated with snooping in the cache
src/mem/bus.cc:
Make sure to snoop on functional accesses
src/mem/cache/base_cache.cc:
Wait to make a request into a response until it is ready to be issued
src/mem/cache/base_cache.hh:
Support range changes for snoops
Set up snoop responses for cache->cache transfers
src/mem/cache/cache_impl.hh:
Only access the cache if it wasn't satisfied by cache->cache transfer
Handle snoop phases (detect block, then snoop)
Fix functional access to work properly (still need to fix snoop path for functional accesses)
--HG--
extra : convert_revision : 4c25f11d7a996c1f56f4f7b55dde87a344e5fdf8
accessed during the construction of another static global
object because there are no guarantees on ordering of
construction, so stick the static global into a function
as a static local and return a reference to the variable.
This fixes the exit callback stuff on my Mac.
--HG--
extra : convert_revision : 63a3844d0b5ee18e2011f1bc7ca7bb703284da94
into zeep.eecs.umich.edu:/home/gblack/m5/newmem
src/cpu/ozone/cpu_impl.hh:
Hand merged
--HG--
extra : convert_revision : f8a5b0205bcb78c8f5e109f456fe7bca80a7abac
src/arch/alpha/isa_traits.hh:
This got changed to the wrong version by accident.
src/cpu/base.cc:
Fix up progress event to not schedule itself if the interval is set to 0.
src/cpu/base.hh:
Fix up the CPU Progress Event to not print itself if it's set to 0. Also remove stats_reset_inst (something I added to m5 but isn't necessary here).
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.hh:
Remove float variable of instResult; it's always held within the double part now.
src/cpu/checker/cpu_impl.hh:
Use thread and not cpuXC.
src/cpu/o3/alpha/cpu_builder.cc:
src/cpu/o3/checker_builder.cc:
src/cpu/ozone/checker_builder.cc:
src/cpu/ozone/cpu_builder.cc:
src/python/m5/objects/BaseCPU.py:
Remove stats_reset_inst.
src/cpu/o3/commit_impl.hh:
src/cpu/ozone/lw_back_end_impl.hh:
Get TC, not XCProxy.
src/cpu/o3/cpu.cc:
Switch out updates from the version of m5 I have. Also remove serialize code that got added twice.
src/cpu/o3/iew_impl.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/thread_state.hh:
Remove code that was added twice.
src/cpu/o3/lsq_unit.hh:
Add back in stats that got lost in the merge.
src/cpu/o3/lsq_unit_impl.hh:
Use proper method to get flags. Also wake CPU if we're coming back from a cache miss.
src/cpu/o3/thread_context_impl.hh:
src/cpu/o3/thread_state.hh:
Support profiling.
src/cpu/ozone/cpu.hh:
Update to use proper typename.
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/dyn_inst_impl.hh:
Updates for newmem.
src/cpu/ozone/lw_lsq_impl.hh:
Get flags correctly.
src/cpu/ozone/thread_state.hh:
Reorder constructor initialization, use tc.
src/sim/pseudo_inst.cc:
Allow for loading of symbol file. Be sure to use ThreadContext and not ExecContext.
--HG--
extra : convert_revision : c5657f84155807475ab4a1e20d944bb6f0d79d94
src/arch/sparc/SConscript:
Added a file that implements ASI utility functions. These don't go in utility.hh because they aren't supposed to be part of the generic ISA interface.
src/arch/sparc/asi.hh:
Fixed up some mistranscriptions, and added function prototypes for some ASI utility functions.
src/arch/sparc/asi.cc:
Implementation of some ASI utility functions.
--HG--
extra : convert_revision : 8021007027b13e91cc66908029470da49a8ca11f
src/kern/linux/linux.hh:
src/kern/solaris/solaris.hh:
Some code cleanup. Uncommented some typedefs.
src/kern/tru64/tru64.hh:
Some code cleanup. Deleted an obsoleted function.
--HG--
extra : convert_revision : b165fd43b9c3113d717b6ac9b02593fd750580b0
src/SConscript:
add intel nic to sconscript
src/dev/pcidev.cc:
fix bug with subsystemid value
src/python/m5/objects/Ethernet.py:
add intel nic to ethernet.py
src/python/m5/objects/Ide.py:
src/python/m5/objects/Pci.py:
Move config_latency into pci where it belogs
--HG--
extra : convert_revision : 7163aaf7b4098496518b0910cef62f2ce3dd574d
src/arch/alpha/linux/process.cc:
src/arch/alpha/linux/process.hh:
src/arch/alpha/process.cc:
src/arch/alpha/process.hh:
src/arch/alpha/tru64/process.cc:
src/arch/alpha/tru64/process.hh:
src/arch/mips/linux/process.cc:
src/arch/mips/linux/process.hh:
src/arch/mips/process.cc:
src/arch/mips/process.hh:
src/arch/sparc/linux/process.cc:
src/arch/sparc/linux/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/process.hh:
src/arch/sparc/solaris/process.cc:
src/arch/sparc/solaris/process.hh:
src/sim/process.cc:
src/sim/process.hh:
src/sim/syscall_emul.cc:
src/sim/syscall_emul.hh:
Changed Process to LiveProcess in syscall handlers and fixed the implementation of uid, euid, gid, egid, pid and ppid as LiveProcess parameters.
src/kern/tru64/tru64.hh:
Changed Process to LiveProcess in syscall handlers and fixed the implementation of uid, euid, gid, egid, pid and ppid as LiveProcess parameters. Also fit tru64 in with the new way to handle stat calls.
--HG--
extra : convert_revision : 0198b838e5c09a730065dc6f018738145bc96269
Includes support for printing readable VectorPort and Proxy names
(via __str__).
--HG--
extra : convert_revision : c48534a498b3036fe6ac45ff1606656546c79afb
Significant revamp of Port code.
Some cleanup of SimObject code too, particularly to
make the SimObject and MetaSimObject implementations of
__setattr__ more consistent.
Unproxy code split out of print_ini().
src/python/m5/multidict.py:
Make get() return None by default, to match semantics
of built-in dictionary objects.
--HG--
extra : convert_revision : db73b6cdd004a82a08b2402afd1e16544cb902a4
Some tweaking to deal with mutually recursive imports.
--HG--
rename : src/python/m5/config.py => src/python/m5/SimObject.py
extra : convert_revision : 166f7bfabfd20100e93d26a89382469465859988
Import of changes for auto-generation of C++ param structs
from my old m5 working directory.
This code is *broken* because pieces need to be shuffled around
to satisfy name dependencies, but that really messes up the
diff, so I want to make an intermediate commit here.
src/python/m5/config.py:
Import of changes for auto-generation of C++ param structs
from my old m5 working directory.
This code is *broken* because pieces need to be shuffled around
to satisfy name dependencies, but that really messes up the
diff, so I want to make an intermediate commit here.
--HG--
extra : convert_revision : cb25ee1f4f77d1902511ee9aa766403733dd8841
Working on pulling out the changes in the cache so that it remains working.
src/mem/bus.cc:
Changes for multi-phase snoop
Some code for registering snoop ranges (a version that compiles and runs, but does nothing)
src/mem/bus.hh:
Changes for multi-phase snoop
src/mem/packet.hh:
Flag for multi-phase snoop
src/mem/port.hh:
Status for multi-phase snoop
--HG--
extra : convert_revision : 4c2e5263bba16e3bcf03aabe36ff45ec36de4720
Added in the filename parameter which is provided for the user space linker.
Fix the ordering and alignment of stack elements.
Made mmap start with the address it has been seen starting with "in the wild"
--HG--
extra : convert_revision : 8734753145f59a6cb433e4f92f43cb28a44b56d4
1. alignaddr wrote it's address to a floating point register rather than a gpr.
2. sethi was sign extending it's immediate value.
--HG--
extra : convert_revision : 9aa30a6485bc4cba916367973b986d439b7c7588
src/python/m5/objects/BaseCPU.py:
Make mem parameter a MemObject, not just a PhysicalMemory
Fix a reference not using self
tests/configs/simple-atomic.py:
Set the mem paramter
tests/configs/simple-timing.py:
Set the mem parameter
--HG--
extra : convert_revision : 6bd9df36831a1c5bafc9e88ab945c2ebe91db785
Kinda port DRAM to new memory system. The code is *really* ugly (not my fault) and right now something about the stats it uses
causes a simulator segfault.
src/SConscript:
Add dram.cc to sconscript
src/mem/physical.cc:
src/mem/physical.hh:
Add params struct to physical memory, use params, make latency function be virtual
src/python/m5/objects/PhysicalMemory.py:
Add DRAMMemory python class
--HG--
extra : convert_revision : 5bd9f2e071c62da89e8efa46fa016f342c01535d
src/cpu/o3/fetch_impl.hh:
Fix ordering so dereference works
src/cpu/o3/lsq_impl.hh:
Check to make sure we didn't squash already
src/cpu/o3/lsq_unit.hh:
Fix for counting squashed retrys in the WB count
src/cpu/o3/lsq_unit_impl.hh:
Make sure to set retryID for stores, and clear it appropriately
--HG--
extra : convert_revision : 689765a1baea7b36f13eb177d65e97b52b6da09f
src/mem/cache/base_cache.cc:
Add in retry path for blocking with multi-level caches
src/mem/cache/base_cache.hh:
Pull more of the blocking fixes into head
src/mem/packet.hh:
Fix typo
--HG--
extra : convert_revision : d4d149adfa414136ebd2c4789b739bb065710f7a
Nate needs to fix sinic builder stuff
Gabe needs to verify my fixes to decoder.isa
OPT/DEBUG compiles for ALPHA_FS, ALPHA_SE, MIPS_SE, SPARC_SE with this changeset
README:
Fix the swig version in the readme
src/SConscript:
remove sinic until nate fixes the builder crap for it
src/arch/alpha/system.hh:
src/arch/mips/isa/includes.isa:
src/arch/sparc/isa/decoder.isa:
src/base/stats/visit.cc:
src/base/timebuf.hh:
src/dev/ide_disk.cc:
src/dev/sinic.cc:
src/mem/cache/miss/mshr.cc:
src/mem/cache/miss/mshr_queue.cc:
src/mem/packet.hh:
src/mem/request.hh:
src/sim/builder.hh:
src/sim/system.hh:
fixes for gcc 4.1
--HG--
extra : convert_revision : 3775427c0047b282574d4831dd602c96cac3ba17
-Basically removed the ASID from places it is no longer needed due to PageTable
src/mem/cache/cache.hh:
src/mem/cache/cache_impl.hh:
src/mem/cache/miss/blocking_buffer.cc:
src/mem/cache/miss/blocking_buffer.hh:
src/mem/cache/miss/miss_queue.cc:
src/mem/cache/miss/miss_queue.hh:
src/mem/cache/miss/mshr.cc:
src/mem/cache/miss/mshr.hh:
src/mem/cache/miss/mshr_queue.cc:
src/mem/cache/miss/mshr_queue.hh:
src/mem/cache/prefetch/base_prefetcher.cc:
src/mem/cache/prefetch/base_prefetcher.hh:
src/mem/cache/tags/fa_lru.cc:
src/mem/cache/tags/fa_lru.hh:
src/mem/cache/tags/iic.cc:
src/mem/cache/tags/iic.hh:
src/mem/cache/tags/lru.cc:
src/mem/cache/tags/lru.hh:
src/mem/cache/tags/split.cc:
src/mem/cache/tags/split.hh:
src/mem/cache/tags/split_lifo.cc:
src/mem/cache/tags/split_lifo.hh:
src/mem/cache/tags/split_lru.cc:
src/mem/cache/tags/split_lru.hh:
Remove asid where it wasn't neccesary anymore due to Page Table
--HG--
extra : convert_revision : ab8bbf4cc47b9eaefa9cdfa790881a21d0e7bf28
src/arch/sparc/process.cc:
All of the auxilliary vectors are now set like they are in the linux elf loader. This code should probably be moved to arch/sparc/linux/process.cc somehow.
--HG--
extra : convert_revision : 4a90cacf70b1032cad3f18b0f833a6df8237e0de
src/arch/alpha/regfile.hh:
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/int_regfile.hh:
src/arch/mips/regfile/misc_regfile.hh:
src/cpu/exetrace.hh:
Added functions to start to support dumping register values once per cycle.
src/cpu/exetrace.cc:
Added some code to support printing the value of registers after each cycle.
src/python/m5/main.py:
Options to turn on output after every instruction. They are commented out.
--HG--
extra : convert_revision : 168a48a6b98ab6be412a96bdee831c71906958b0
configs/common/FSConfig.py:
Clean up some code to make functions look less like classes. Also put makeList function (formerly listWrapper) into m5 itself.
configs/test/fs.py:
Update for changed code.
src/python/m5/__init__.py:
Put makeList into m5.
--HG--
extra : convert_revision : 731806a7486f9abf986f52926126df666b024b1d
src/arch/mips/isa/base.isa:
special case syscall disasembly... maybe give own instruction class?
src/arch/mips/isa/decoder.isa:
add 'IsSerializeAfter' flag for syscall
src/cpu/o3/commit.hh:
Add skidBuffer to commit
src/cpu/o3/commit_impl.hh:
Use skidbuffer in MIPS ISA
src/cpu/o3/fetch_impl.hh:
Print name out when there is a fault
src/cpu/o3/mips/cpu_impl.hh:
change comment
--HG--
extra : convert_revision : d032549e07102bdd50aa09f044fce8de6f0239b5
src/arch/sparc/isa/operands.isa:
Added the GSR register as a control register
--HG--
extra : convert_revision : 11ff4016d5c72468dd2daeba3a6105d4e84220ce
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-o3
--HG--
extra : convert_revision : be1e5dcb1c5025db8526e628c2060b1790d38227
succesfully but there are some minor quirks to iron out. Who would've known a DELAY SLOT introduces that much complexity?! arrgh!
Anyways, a lot of this stuff had to do with my project at MIPS and me needing to know how I was going to get this working for the MIPS
ISA. So I figured I would try to touch it up and throw it in here (I hate to introduce non-completely working components... )
src/arch/alpha/isa/mem.isa:
spacing
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
Gabe really authored this
src/arch/mips/isa/decoder.isa:
add StoreConditional Flag to instruction
src/arch/mips/isa/formats/basic.isa:
Steven really did this file
src/arch/mips/isa/formats/branch.isa:
fix bug for uncond/cond control
src/arch/mips/isa/formats/mem.isa:
Adjust O3CPU memory access to use new memory model interface.
src/arch/mips/isa/formats/util.isa:
update LoadStoreBase template
src/arch/mips/isa_traits.cc:
update SERIALIZE partially
src/arch/mips/process.cc:
src/arch/mips/process.hh:
no need for this for NOW. ASID/Virtual addressing handles it
src/arch/mips/regfile/misc_regfile.hh:
add in clear() function and comments for future usage of special misc. regs
src/cpu/base_dyn_inst.hh:
add in nextNPC variable and supporting functions.
add isCondDelaySlot function
Update predTaken and mispredicted functions
src/cpu/base_dyn_inst_impl.hh:
init nextNPC
src/cpu/o3/SConscript:
add MIPS files to compile
src/cpu/o3/alpha/thread_context.hh:
no need for my name on this file
src/cpu/o3/bpred_unit_impl.hh:
Update RAS appropriately for MIPS
src/cpu/o3/comm.hh:
add some extra communication variables to aid in handling the
delay slots
src/cpu/o3/commit.hh:
minor name fix for nextNPC functions.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/rename_impl.hh:
Fix necessary variables and functions for squashes with delay slots
src/cpu/o3/cpu.cc:
Update function interface ...
adjust removeInstsNotInROB function to recognize delay slots insts
src/cpu/o3/cpu.hh:
update removeInstsNotInROB
src/cpu/o3/decode.hh:
declare necessary variables for handling delay slot
src/cpu/o3/dyn_inst.hh:
Add in MipsDynInst
src/cpu/o3/fetch.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/rename.hh:
declare necessary variables and adjust functions for handling delay slot
src/cpu/o3/inst_queue.hh:
src/cpu/simple/base.cc:
no need for my name here
src/cpu/o3/isa_specific.hh:
add in MIPS files
src/cpu/o3/scoreboard.hh:
dont include alpha specific isa traits!
src/cpu/o3/thread_context.hh:
no need for my name here, i just rearranged where the file goes
src/cpu/static_inst.hh:
add isCondDelaySlot function
src/cpu/o3/mips/cpu.cc:
src/cpu/o3/mips/cpu.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/mips/dyn_inst.cc:
src/cpu/o3/mips/dyn_inst.hh:
src/cpu/o3/mips/dyn_inst_impl.hh:
src/cpu/o3/mips/impl.hh:
src/cpu/o3/mips/params.hh:
src/cpu/o3/mips/thread_context.cc:
src/cpu/o3/mips/thread_context.hh:
MIPS file for O3CPU...mirrors ALPHA definition
--HG--
extra : convert_revision : 9bb199b4085903e49ffd5a4c8ac44d11460d988c
src/arch/sparc/isa/decoder.isa:
fixed subc, subccc, added decoding for impdep1 to fit with ua2005, and started work on floating point.
src/arch/sparc/isa/operands.isa:
Added in floating point operands, and changed the numbering of operands.
src/arch/sparc/regfile.hh:
Fixed some memory errors related to floating point.
--HG--
extra : convert_revision : fa0aef2021a5cf99f175fceeb533fe63eb5f805c
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge
configs/test/fs.py:
Hand merge.
--HG--
extra : convert_revision : 78f7c46084f66d52ddfe0386fd7c08de8017331e
SConstruct:
Include an option to specify the CPUs being tested.
src/cpu/SConscript:
Checker isn't SMT right now, so don't do SMT tests with the O3CPU if we're using the checker.
src/python/m5/objects/O3CPU.py:
Include default options. Unfortunately FullO3Config.py is still needed because it specifies which FUPool is being used.
tests/SConscript:
Several minor updates (sorry for one commit). Updated the copyright and fixed some m5 style issues. Also added the ability to specify which CPUs to run the tests on.
--HG--
extra : convert_revision : b0b801115705544ea02e572e31314f7bb8b5f0f2
Make PioPort use it
Make Physical memory use it as well
src/SConscript:
Add timing port to sconscript
src/dev/io_device.cc:
src/dev/io_device.hh:
Move simple timing pio port stuff into a simple timing port class so it can be used by the physical memory
src/mem/physical.cc:
src/mem/physical.hh:
use a simple timing port stuff instead of rolling our own here
--HG--
extra : convert_revision : e5befbd295a572568cfdca533efb5ed1984c59d1
Add a max time option in seconds and a single system root clock be 1THz
configs/test/fs.py:
Add a max time option in seconds and a single system root clock be 1THz
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Enforce the timing cpu ticking at it's clock rate
--HG--
extra : convert_revision : a1b0de27abde867f9c3da5bec11639e3d82a95f5
src/python/m5/objects/Device.py:
src/python/m5/objects/Pci.py:
Change the default here to a latency rather than a Tick
--HG--
extra : convert_revision : b9366dd89646cea27a836baf249ac2da38c1809f
src/cpu/checker/cpu.hh:
Don't count checker's instructions towards total instructions committed.
src/python/m5/objects/Root.py:
Set default clock to 1 THz.
--HG--
extra : convert_revision : 0b5eaa197c860c361a3b00087e45ddc249ff1918
Right now only non-SMT SE regression tests have been added back in. The rest are pending getting SMT working, and consolidating the FS configuration files.
Eventually support for different OSs can be added so you can specify which versions of the binary you want to run from one config file.
Note: mp-test1 doesn't have any reference stats because MP mode doesn't currently work. The test itself should probably work once the code is fixed.
SConstruct:
Updates to allow for regression tests to work via the command line "scons build/ALPHA_SE/test/debug/quick" and such once again.
src/cpu/SConscript:
Keep a list of SMT supporting CPUs so that the regression tests can easily specify which CPUs to use if they are SMT only.
--HG--
extra : convert_revision : 34e6286150aae8f316ae694f6c00be8f510522f2
src/cpu/o3/lsq_unit.hh:
LSQ needs to decrement the WB counter if the load is going to be replayed.
src/cpu/o3/lsq_unit_impl.hh:
LSQ needs to decrement the WB counter if the load is squashed.
--HG--
extra : convert_revision : 20a10baf0d6ab46065e561ddba231251865ebdbd
src/python/m5/config.py:
Formatting.
src/python/m5/main.py:
Slightly more useful output when you don't enter in a valid script file.
--HG--
extra : convert_revision : 5a71a6c94dbedeb000f83f57b0b575c2df924509
src/arch/SConscript:
Fixes for including the CheckerCPU if it's specified via command line. Previously the env variable was actually being modified.
src/cpu/SConscript:
Copy the CPU_MODELS from the env, don't create a proxy to it.
--HG--
extra : convert_revision : 7d069bd93a6834ccaa1c378b2bc76dce76745c19
suspend context will now take the thread off the activeThread list.
src/arch/mips/isa_traits.cc:
add in copy MiscRegs unimplemented function
--HG--
extra : convert_revision : 3ed5320b3786f84d4bb242e3a32b6f415339c3ba
src/arch/mips/isa_traits.hh:
MaxAddr is defined in config.py now
src/arch/mips/process.cc:
adjust process so SMT threads get their own stack space
src/arch/mips/process.hh:
add stack_start static variable
--HG--
extra : convert_revision : 73fdf3da9831d86536651835d209806c7f0d59da
into zeep.pool:/z/saidi/work/m5.newmem
src/python/m5/main.py:
merge two help fixes
--HG--
extra : convert_revision : b5c4a88bb84b726bebd3e357a4ef29acc0d95600
update scripts acordingly
configs/test/SysPaths.py:
new syspaths from nate, this one allows you to set script, binary, and disk paths like
system.dir = 'aouaou' in your script
configs/test/fs.py:
update for system mem_mode
Put small checkpoint example
Make clock 1THz
configs/test/test.py:
src/arch/alpha/freebsd/system.cc:
src/arch/alpha/linux/system.cc:
src/arch/alpha/system.cc:
src/arch/alpha/tru64/system.cc:
src/arch/sparc/system.cc:
src/python/m5/objects/System.py:
src/sim/system.cc:
src/sim/system.hh:
update for system mem_mode
src/dev/io_device.cc:
Use time returned from sendAtomic to delay
--HG--
extra : convert_revision : 67eedb3c84ab2584613faf88a534e793926fc92f
src/cpu/o3/lsq.hh:
Update to have LSQ work with only one dcache port for all LSQ Units. LSQ has the dcache port, and the LSQ Units must tell the LSQ if the cache has become blocked.
src/cpu/o3/lsq_impl.hh:
Updates to have the LSQ work with only one dcache port for all LSQUnits.
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
Update for LSQ to create dcache port instead of LSQUnits. Now LSQUnits are given the dcache port from the LSQ, and also must check the LSQ if the cache is blocked prior to accessing the cache.
--HG--
extra : convert_revision : 2708adbf323f4e7647dc0c1e31ef5bb4596b89f8
States are now running, draining, or drained. memory state information moved into system object
system parameter is not fs only for cpus
Implement drain() support in devices
Update for drain() call that returns number of times drain_event->process() will be called
Break O3 CPU! No sense in putting in a hack change that kevin is going to remove in a few minutes i imagine
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
Since se mode has a system, allow access to it
Verify that the atomic cpu is connected to an atomic system on resume
src/cpu/simple/base.cc:
Since se mode has a system, allow access to it
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Update for new drain() call that returns number of times drain_event->process() will be called and memory state being moved into the system
Since se mode has a system, allow access to it
Verify that the timing cpu is connected to an timing system on resume
src/dev/ide_disk.cc:
src/dev/io_device.cc:
src/dev/io_device.hh:
src/dev/ns_gige.cc:
src/dev/ns_gige.hh:
src/dev/pcidev.cc:
src/dev/pcidev.hh:
src/dev/sinic.cc:
src/dev/sinic.hh:
Implement drain() support in devices
src/python/m5/config.py:
Allow drain to return number of times drain_event->process() will be called. Normally 0 or 1 but things like O3 cpu or devices with multiple ports may want to call it many times
src/python/m5/objects/BaseCPU.py:
move system parameter out of fs to everyone
src/sim/sim_object.cc:
src/sim/sim_object.hh:
States are now running, draining, or drained. memory state information moved into system object
src/sim/system.cc:
src/sim/system.hh:
memory mode information now contained in system object
--HG--
extra : convert_revision : 1389c77e66ee6d9710bf77b4306fb47e107b21cf
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge
configs/test/test.py:
Hand merge.
--HG--
extra : convert_revision : e3fce9cf50a65a9400cd3ec887b13e4765274ec2
src/SConscript:
It's no longer "ALPHA_ISA". I don't think we meant to leave out the EIO sources.
--HG--
extra : convert_revision : 1ca63ffb571d9021f1ced0bf0df1816b0b798edc
src/cpu/o3/commit_impl.hh:
Always set instruction. This is necessary for serialization as the instruction is also serialized.
src/cpu/o3/cpu.cc:
Change serialization so it matches other CPU's output. Also fix up some indexing.
--HG--
extra : convert_revision : 52f6e183132d177bed6e29dd7cf0c10aed6d8534
src/python/m5/objects/DiskImage.py:
src/python/m5/objects/Ethernet.py:
src/python/m5/objects/Ide.py:
src/python/m5/objects/Tsunami.py:
Push more default options to the Python object level as they are rarely changed.
--HG--
extra : convert_revision : 963eb7a34cd04529b3c5f24b92904ab725c93efb
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem
src/cpu/o3/fetch_impl.hh:
Hand merge.
--HG--
extra : convert_revision : 820dab2bc921cbadecaca51cd069327f984f5c74
src/python/m5/main.py:
Add a command line option to invoke pdb on your script
--HG--
extra : convert_revision : ef5a2860bd3f6e479fa80eccaae0cb5541a20b50
Now hello world works with 2 levels of cache with O3 CPU(multiple outstanding requests).
src/cpu/o3/fetch_impl.hh:
Fix ordering issue with squashed Icache Fetches and Static data in packet.
--HG--
extra : convert_revision : a6adb87540b007ead0b4982cb3f31da8199fb5ca
src/python/m5/main.py:
Don't allow interspersed arguments, it messes things up
--HG--
extra : convert_revision : 8f1bcf4391f570741d92bf5420879862a48f6016
configs/test/fs.py:
configs/test/test.py:
update for the new way that m5 deals with options
src/python/SConscript:
Compile AUTHORS, LICENSE, README, and RELEASE_NOTES into the
python stuff.
src/python/m5/__init__.py:
redo the way options work.
Move them all to main.py
src/sim/main.cc:
Migrate more functionality for main() into python.
Namely option parsing
src/python/m5/attrdict.py:
A dictionary object that overrides attribute access to
do item access.
src/python/m5/main.py:
The new location for M5's option parsing, and the main()
routine to set up the simulation.
--HG--
extra : convert_revision : c86b87a9f508bde1994088e23fd470c7753ee4c1
src/mem/cache/base_cache.cc:
If we still have outstanding requests, need to schedule event again
src/mem/cache/miss/miss_queue.cc:
Need to use block size so overlapping requests match in the MSHR's
src/mem/cache/miss/mshr.cc:
Actually save the address, otherwise we can't match MSHR's
--HG--
extra : convert_revision : f0f018b89c2fb99f3ce8d6eafc0712ee8edeeda8
src/cpu/SConscript:
Change the error message to be slightly nicer.
src/cpu/o3/commit.hh:
Remove old code.
src/cpu/o3/commit_impl.hh:
Remove old unused code.
--HG--
extra : convert_revision : 48aa430e1f3554007dd5e4f3d9e89b5e4f124390
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-o3
--HG--
extra : convert_revision : 9098d989832e2a5818b80771e3c02170c5c8cd5b
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/python/m5/objects/OzoneCPU.py:
Support Ron's recent port changes.
src/cpu/ozone/lw_back_end_impl.hh:
Support Ron's recent port changes. Also support handling faults in SE.
--HG--
extra : convert_revision : aa1ba5111b70199c052da3e13bae605525a69891
src/cpu/checker/cpu.hh:
Now that BaseCPU is a MemObject, the checker must define this function.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_unit.hh:
Implement getPort function so the connector can connect the ports properly.
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_unit_impl.hh:
The connector handles connecting the ports now.
src/python/m5/objects/O3CPU.py:
Add ports to the parameters.
--HG--
extra : convert_revision : 0b1a216b9a5d0574e62165d7c6c242498104d918
src/sim/main.cc:
src/sim/serialize.cc:
src/sim/serialize.hh:
Take in the directory name when checkpointing.
--HG--
extra : convert_revision : 040e828622480f1051e2156f4439e24864c38d45
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-o3
--HG--
extra : convert_revision : be8b295ebf54a7c6bf720a20ab6aa9f02aee8060
On the way towards multi-level caches (L2)
src/mem/cache/base_cache.cc:
src/mem/cache/base_cache.hh:
Fix address range calculation. Still need bus to handle snoop ranges.
--HG--
extra : convert_revision : 800078d88aab5e563f4a9bb599f91cd44f36e625
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-o3
--HG--
extra : convert_revision : f97469b7d19c82deb3d068f80546d729757c25e3
Still, there is a problem with the LSQ and indexing out of range in the buffer.
I havent nailed down the fix yet, but it's coming ...
src/cpu/o3/commit_impl.hh:
add space to DPRINT
src/cpu/o3/cpu.cc:
add newline to DPRINT
src/cpu/o3/rob.hh:
src/cpu/o3/rob_impl.hh:
Each thread needs it's own squashedSeqNum for the case where they are both squashing at the same time and they dont
write over each other's squash number.
--HG--
extra : convert_revision : 2155421a8b5b20e4544eea3d3c53d3e715465fa6
src/cpu/o3/cpu.cc:
Fix up keeping proper state when switched out and drained.
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Keep track of the event we use to schedule fetch initially and upon resume. We may have to cancel the event if the CPU is switched out.
--HG--
extra : convert_revision : 60a2a1bd2cdc67bd53ca4a67aa77166c826a4c8c
configs/test/test.py:
Update to use new cpu getPort functionality
src/cpu/base.cc:
Make cpu's a memObject to expose getPort interface
src/cpu/base.hh:
Make cpu's a memObject to export getPort interface
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Now use the connector via getPort interface
src/mem/cache/base_cache.cc:
Make sure the cache recognizes all port names
--HG--
extra : convert_revision : dbfefa978ec755bc8aa6f962ae158acf32dafe61
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-o3
--HG--
extra : convert_revision : 90717b492139428e0c48be35a6bda45960c61086
Major thing was to not execute commit if there are no active threads in CPU.
src/cpu/o3/alpha/thread_context.hh:
call deallocate instead of deallocateContext
src/cpu/o3/commit_impl.hh:
dont run commit stage if there are no instructions
src/cpu/o3/cpu.cc:
add deallocate event, deactivateThread function, and edit deallocateContext.
src/cpu/o3/cpu.hh:
add deallocate event and add optional delay to deallocateContext
src/cpu/o3/thread_context.hh:
optional delay for deallocate
src/cpu/o3/thread_context_impl.hh:
edit DPRINTFs to say Thread Context instead of Alpha TC
src/cpu/thread_context.hh:
optional delay
src/sim/syscall_emul.hh:
name stuff
--HG--
extra : convert_revision : f4033e1f66b3043d30ad98dcc70d8b193dea70b6
src/cpu/o3/commit_impl.hh:
Fix to clear drainPending variable on call to resume.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
Support serializing and unserializing in the O3 CPU.
src/cpu/o3/lsq_impl.hh:
Be sure to say we have no stores to write back if the active thread list is empty.
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
Slightly change how SimpleThread is used to copy from other ThreadContexts.
--HG--
extra : convert_revision : 92a5109b3783a989d5b451036061ef82c56d3121
src/cpu/o3/commit.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/decode.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/rename.hh:
src/cpu/o3/rename_impl.hh:
Return a value so that the CPU can instantly return from draining if the pipeline is already drained.
src/cpu/o3/cpu.cc:
Use values returned from pipeline stages so that the CPU can instantly return from draining if the pipeline is already drained.
--HG--
extra : convert_revision : d8ef6b811644ea67c8b40c4719273fa224105811
src/arch/alpha/regfile.hh:
Define serialize/unserialize functions on MiscRegFile itself.
src/cpu/o3/regfile.hh:
Remove old commented code.
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
Push common serialization code to ThreadState level. Also allow the SimpleThread to be used for checkpointing by other models.
src/cpu/thread_state.cc:
src/cpu/thread_state.hh:
Move common serialization code into ThreadState.
--HG--
extra : convert_revision : ef64ef515355437439af967eda2e610e8c1b658b
Still need
1) detailed CPU (blocking ability in cache)
1a) Multiple outstanding requests (need to keep track of times for events)
2)Multi-level support
3)MP coherece support
4)LL/SC support
5)Functional path needs to be correctly implemented (temporarily works without multiple outstanding requests (simple cpu))
src/cpu/simple/timing.cc:
Temp hack because timing cpu doesn't export ports properly so single I/D cache communicates only through the Icache port.
src/mem/cache/base_cache.cc:
Handle marking MSHR's in service
Add support for getting CSHR's
src/mem/cache/base_cache.hh:
Make these functions visible at the base cache level
src/mem/cache/cache.hh:
make the functions virtual
src/mem/cache/cache_impl.hh:
Rename the function to make sense
src/mem/packet.hh:
Accidentally clearing the needsResponse field when sending a response back.
--HG--
extra : convert_revision : 2325d4e0b77e470fa9da91490317dc8ed88b17e2
src/dev/tsunami_pchip.hh:
Need ULL() for 32-bit hosts.
src/sim/pseudo_inst.cc:
Forgot to remove sampler include from here.
--HG--
extra : convert_revision : 6ab6bdc721290167b4c2b78da3d28a4992eb24d5
src/cpu/simple/timing.cc:
Update for changed return values.
src/python/m5/__init__.py:
Loop in order to make sure all objects are really drained. Objects may become undrained as other objects become drained (e.g. a bus-bridge has a packet, while a bus is empty, and the first drain() will cause the bus-bridge to give the packet to the bus).
The only case we know every object is actually drained is if they all return immediately that they are drained.
--HG--
extra : convert_revision : 80057a1d6d30381bd0b67b23549bd202f447c5cb
src/mem/cache/base_cache.cc:
src/mem/cache/base_cache.hh:
src/mem/cache/cache.hh:
Changes to handle timing reads in Simple CPU (blocking buffers)
--HG--
extra : convert_revision : a2e7d4287d7cdfd1bbf9c929ecbeafde499a5b9f
Update configuration for new default responder on bus
Update to devices to handle their own pci config space without pciconfigall
Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for
Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same
bus:dev:func and interrupt
Remove pciconfigspace from pci devices, and py files
Add calcConfigAddr that returns address for config space based on bus/dev/function + offset
configs/test/fs.py:
Update configuration for new default responder on bus
src/dev/ide_ctrl.cc:
src/dev/ide_ctrl.hh:
src/dev/ns_gige.cc:
src/dev/ns_gige.hh:
src/dev/pcidev.cc:
src/dev/pcidev.hh:
Update to handle it's own pci config space without pciconfigall
src/dev/io_device.cc:
src/dev/io_device.hh:
change naming for pio port
break out recvTiming into two functions to reuse code
src/dev/pciconfigall.cc:
src/dev/pciconfigall.hh:
removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for
src/dev/pcireg.h:
add a max size for PCI config space (per PCI spec)
src/dev/platform.cc:
src/dev/platform.hh:
remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same
bus:dev:func and interrupt
src/dev/sinic.cc:
remove pciconfigspace as it's no longer a needed parameter
src/dev/tsunami.cc:
src/dev/tsunami.hh:
src/dev/tsunami_pchip.cc:
src/dev/tsunami_pchip.hh:
add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec)
src/mem/bus.cc:
src/mem/bus.hh:
src/python/m5/objects/Bus.py:
add idea of default responder to bus
src/python/m5/objects/Pci.py:
add config port for pci devices
add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec)
--HG--
extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
src/python/m5/config.py:
Invert the return value.
src/sim/sim_object.cc:
Invert the return value of drain.
src/sim/sim_object.hh:
Change the return value of drain.
--HG--
extra : convert_revision : 41bb122c6f29302d8b3815d7bd6a2ea8fba64df9
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-o3
--HG--
extra : convert_revision : 2f08ea52ef54118d42aa590c0d86aa0cc7988713
src/cpu/cpu_models.py:
Use O3DynInst
src/cpu/o3/dyn_inst.hh:
declare O3DynInst here based off of ISA ... this must be updated for each ISA.
src/cpu/static_inst.hh:
take out O3 forward declarations here and include header file to keep this file clean
--HG--
extra : convert_revision : 0d65463479c3cfc2d1154935b1032dae32c5efd0
src/arch/mips/isa/formats/fp.isa:
Adjust for newmem
src/cpu/cpu_models.py:
Use O3DynInst instead of convoluted way
src/cpu/o3/alpha/impl.hh:
take out O3DynInst typedef here ...
src/cpu/o3/cpu.cc:
open up the SMT functions in the O3CPU
src/cpu/static_inst.hh:
Add O3DynInst
src/cpu/o3/dyn_inst.hh:
Use to get ISA-specific O3DynInst
--HG--
extra : convert_revision : 3713187ead93e336e80889e23a1f1d2f36d664fe
src/sim/pseudo_inst.cc:
Exit sim loop with a specific string to indicate to Python what caused the exit. The user's script needs to interpret the exit events and handle them as desired.
--HG--
extra : convert_revision : 8eb4a42285dacb3ada3a791173c605b5acb78598
src/cpu/checker/cpu_impl.hh:
The only fault we handle in SE causes troubles when invoked with the Checker. This is because it changes state within the process, and not the checker, so the state isn't correct when the main CPU calls invoke. It's safe to just ignore the fault in the Checker and continue.
--HG--
extra : convert_revision : 5000d763a75009c7a6011646a6790ac5b23df6bb
src/base/traceflags.py:
Remove BaseCPU traceflag.
src/cpu/o3/alpha/params.hh:
Move non-Alpha specific parameters out of this params class.
src/cpu/o3/params.hh:
Move non-Alpha specific params into this params class.
--HG--
extra : convert_revision : e5b652adb47a240376733400e6054c66c50bd514
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge
src/base/traceflags.py:
src/cpu/SConscript:
Hand merge.
src/cpu/o3/alpha/params.hh:
Hand merge. This needs to get changed.
--HG--
rename : src/cpu/o3/alpha_cpu_builder.cc => src/cpu/o3/alpha/cpu_builder.cc
rename : src/cpu/o3/alpha_params.hh => src/cpu/o3/alpha/params.hh
rename : src/python/m5/objects/AlphaO3CPU.py => src/python/m5/objects/O3CPU.py
extra : convert_revision : 581f338f5bce35288f7d15d95cbd0ac3a9135e6a
src/cpu/o3/alpha_cpu_builder.cc:
src/cpu/o3/alpha_params.hh:
Add in dispatchWidth, wbWidth, wbDepth parameters. wbDepth is the number of cycles of wbWidth instructions that can be buffered.
src/cpu/o3/iew.hh:
Include separate parameter for dispatch width.
Also limit the number of outstanding writebacks so the writeback buffer isn't overflowed. The IQ must make sure with the IEW stage that it can issue instructions prior to issuing.
src/cpu/o3/iew_impl.hh:
Include separate parameter for dispatch width.
Also limit the number of outstanding writebacks so the writeback buffer isn't overflowed.
src/cpu/o3/inst_queue_impl.hh:
IQ needs to check with the IEW to make sure it can issue instructions, and increments the IEW wb counter each time there is an outstanding instruction that will writeback.
src/cpu/o3/lsq_unit_impl.hh:
Be sure to decrement the writeback counter if there's a squashed load that returned.
src/python/m5/objects/AlphaO3CPU.py:
Change the parameters to include dispatch width, writeback width, and writeback depth.
--HG--
extra : convert_revision : 31c8cc495273e3c481b79055562fc40f71291fc4
Properly implement the MSHR allocate function.
src/cpu/simple/timing.cc:
Set the thread context in the CPU.
Need to do this properly, currently I just set it to Cpu=0 Thread=0. This will just cause all the stats in the cache based on these to just yield totals and not a distribution.
src/mem/cache/miss/mshr.cc:
Properly implement the allocate function for the MSHR.
--HG--
extra : convert_revision : bcece518e54ed1404db3196f996a77b4dd5c1c1e
src/cpu/o3/alpha/thread_context.hh:
Use 'this' when accessing cpu
src/cpu/o3/cpu.hh:
add numActiveThreds function
src/cpu/o3/thread_context.hh:
forward class declarations
src/cpu/o3/thread_context_impl.hh:
add quiesce event header file
src/cpu/thread_context.hh:
add exit() function to thread context (read comments in file)
src/sim/syscall_emul.cc:
adjust exitFunc syscall
--HG--
extra : convert_revision : 323dc871e2b4f4ee5036be388ceb6634cd85a83e
Edit Test3 for newmem
src/base/traceflags.py:
Add O3CPU flag
src/cpu/base.cc:
for some reason adding a BaseCPU flag doesnt work so just go back to old way...
src/cpu/o3/alpha/cpu_builder.cc:
Determine number threads by workload size instead of solely by parameter.
Default SMT fetch policy to RoundRobin if it's not specified in Config file
src/cpu/o3/commit.hh:
only use nextNPC for !ALPHA
src/cpu/o3/commit_impl.hh:
add FetchTrapPending as condition for commit
src/cpu/o3/cpu.cc:
panic if active threads is more than Impl::MaxThreads
src/cpu/o3/fetch.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/rob.hh:
src/cpu/o3/rob_impl.hh:
name stuff
src/cpu/o3/fetch_impl.hh:
fatal if try to use SMT branch count, that's unimplemented right now
src/python/m5/config.py:
make it clearer that a parameter is not valid within a configuration class
--HG--
extra : convert_revision : 55069847304e40e257f9225f0dc3894ce6491b34
src/base/traceflags.py:
add BaseCPU flag, O3CPUAll flag grouping
src/cpu/base.cc:
Use BaseCPU flag instead of FullCPU flag
--HG--
extra : convert_revision : 32f737a2f58eb936634799f1f809e07cbba90179
add activateThread event and functions
src/cpu/o3/alpha/cpu_builder.cc:
Have CPU builder build a DerivO3CPU not a DerivAlphaO3CPU
src/cpu/o3/cpu.cc:
add activateThread Event
add activateThread function
adjust activateContext to schedule a thread to activate within the
CPU instead of activating thread right away. This will lead to stages
trying to use threads that arent ready yet and wasting execution time & possibly
performance.
src/cpu/o3/cpu.hh:
add activateThread Event
add activateThread function
add schedule/descheculed activate thread event
--HG--
extra : convert_revision : 236d30dc160910507ad36f7f527ab185ed38dc04
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-o3
--HG--
extra : convert_revision : 3c1405d8b4831c6240e02ba65a72043ca55f4a46
Use O3CPU when building instead of AlphaO3CPU.
I could use some better python magic in the cpu_models.py file!
AUTHORS:
add middle initial
SConstruct:
change from AlphaO3CPU to O3CPU
src/cpu/SConscript:
edits to build O3CPU instead of AlphaO3CPU
src/cpu/cpu_models.py:
change substitution template to use proper CPU EXEC CONTEXT For O3CPU Model...
Actually, some Python expertise could be used here. The 'env' variable is not
passed to this file, so I had to parse through the ARGV to find the ISA...
src/cpu/o3/base_dyn_inst.cc:
src/cpu/o3/bpred_unit.cc:
src/cpu/o3/commit.cc:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/decode.cc:
src/cpu/o3/fetch.cc:
src/cpu/o3/iew.cc:
src/cpu/o3/inst_queue.cc:
src/cpu/o3/lsq.cc:
src/cpu/o3/lsq_unit.cc:
src/cpu/o3/mem_dep_unit.cc:
src/cpu/o3/rename.cc:
src/cpu/o3/rob.cc:
use isa_specific.hh
src/sim/process.cc:
only initi NextNPC if not ALPHA
src/cpu/o3/alpha/cpu.cc:
alphao3cpu impl
src/cpu/o3/alpha/cpu.hh:
move AlphaTC to it's own file
src/cpu/o3/alpha/cpu_impl.hh:
Move AlphaTC to it's own file ...
src/cpu/o3/alpha/dyn_inst.cc:
src/cpu/o3/alpha/dyn_inst.hh:
src/cpu/o3/alpha/dyn_inst_impl.hh:
include paths
src/cpu/o3/alpha/impl.hh:
include paths, set default MaxThreads to 2 instead of 4
src/cpu/o3/alpha/params.hh:
set Alpha Specific Params here
src/python/m5/objects/O3CPU.py:
add O3CPU class
src/cpu/o3/SConscript:
include isa-specific build files
src/cpu/o3/alpha/thread_context.cc:
NEW HOME of AlphaTC
src/cpu/o3/alpha/thread_context.hh:
new home of AlphaTC
src/cpu/o3/isa_specific.hh:
includes ISA specific files
src/cpu/o3/params.hh:
base o3 params
src/cpu/o3/thread_context.hh:
base o3 thread context
src/cpu/o3/thread_context_impl.hh:
base o3 thead context impl
--HG--
rename : src/cpu/o3/alpha_cpu.cc => src/cpu/o3/alpha/cpu.cc
rename : src/cpu/o3/alpha_cpu.hh => src/cpu/o3/alpha/cpu.hh
rename : src/cpu/o3/alpha_cpu_builder.cc => src/cpu/o3/alpha/cpu_builder.cc
rename : src/cpu/o3/alpha_cpu_impl.hh => src/cpu/o3/alpha/cpu_impl.hh
rename : src/cpu/o3/alpha_dyn_inst.cc => src/cpu/o3/alpha/dyn_inst.cc
rename : src/cpu/o3/alpha_dyn_inst.hh => src/cpu/o3/alpha/dyn_inst.hh
rename : src/cpu/o3/alpha_dyn_inst_impl.hh => src/cpu/o3/alpha/dyn_inst_impl.hh
rename : src/cpu/o3/alpha_impl.hh => src/cpu/o3/alpha/impl.hh
rename : src/cpu/o3/alpha_params.hh => src/cpu/o3/alpha/params.hh
rename : src/python/m5/objects/AlphaO3CPU.py => src/python/m5/objects/O3CPU.py
extra : convert_revision : d377d6417452ac337bc502f28b2fde907d6b340e
Need to clean up a bunch of flags/hacks in the code. Then onto Timming mode.
Functional accesses also work properly, although not exactly how we wanted them. I'll need to clean that up as well.
src/cpu/simple/atomic.cc:
Atomic CPU needs to set thread context so stats work in cache. Temporarily just use CPU=0 ThreadID=0
src/mem/cache/cache_impl.hh:
Need to return success/failure properly still
Physical memory object doesn't assert SATISFIED anymore, need to remove that flag
src/mem/cache/tags/lru.cc:
Doesn't work if the REQ doesn't set it's ASID. Temporary fix use 0 always
--HG--
extra : convert_revision : d06a39684af593db699b64df9a29f80c61d8d050
Compile and initialization work, still working on functionality.
src/mem/cache/base_cache.cc:
Temp fix for cpu's use of getPort functionality. CPU's will need to be ported to the new connector objects.
Also, all packets have to have data or the delete fails.
src/mem/cache/cache.hh:
Fix function prototypes so overloading works
src/mem/cache/cache_impl.hh:
fix functions to match virtual base class
src/mem/cache/miss/miss_queue.cc:
Packets havve to have data, or delete fails
src/python/m5/objects/BaseCache.py:
Update for newmem
--HG--
extra : convert_revision : 2b6ad1e9d8ae07ace9294cd257e2ccc0024b7fcb
This now compiles.
src/mem/cache/base_cache.cc:
Fix getPort function that changed
src/mem/cache/base_cache.hh:
Fix get port function, provide default implementations of virtual functions in the base class
src/mem/cache/cache.hh:
Fix virtual function declerations
src/mem/cache/cache_builder.cc:
Fix params
src/mem/cache/cache_impl.hh:
src/mem/cache/miss/blocking_buffer.cc:
src/mem/cache/miss/miss_queue.cc:
src/mem/cache/miss/mshr.cc:
src/mem/cache/prefetch/base_prefetcher.cc:
src/mem/cache/tags/iic.cc:
src/mem/cache/tags/lru.cc:
Properly allocate data in packet
--HG--
extra : convert_revision : dedf8b0f76ab90b06b60f8fe079c0ae361f91a48
src/sim/pseudo_inst.cc:
Remove the setup function from Checkpoint. I'm not sure what we want to do with this pseudoinst.
src/sim/serialize.hh:
Remove setup function.
--HG--
extra : convert_revision : 5ff494d816e2d8a7fe65a3d13037608003388d8f
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/simple/atomic.hh:
Switching out no longer takes a sampler.
src/cpu/simple/atomic.cc:
Fix up switching out. Also fix up serialization; the nameOut() was messing up the ordering.
src/cpu/simple/timing.cc:
Add in quiesce, fix up serialization.
src/cpu/simple/timing.hh:
Add in queisce, fix up serialization.
--HG--
extra : convert_revision : 9d59d53bdf269d4d82fb119e5ae7c8a5d475880b
Key new functions that can be called on the m5 object at the python interpreter:
doQuiesce(root) - A helper function that quiesces the object passed in and all of its children.
resume(root) - Another helper function that tells the object and all of its children that the quiesce is over.
checkpoint(root) - Takes a checkpoint of the system. Checkpoint directory must be set before hand.
setCheckpointDir(name) - Sets the checkpoint directory.
restoreCheckpoint(root) - Restores the values from the checkpoint located in the checkpoint directory.
changeToAtomic(system) - Changes the system and all of its children to atomic memory mode.
changeToTiming(system) - Changes the system and all of its children to timing memory mode.
switchCpus(list) - Takes in a list of tuples, where each tuple is a pair of (old CPU, new CPU). Quiesces the old CPUs, and then switches over to the new CPUs.
src/SConscript:
Remove serializer, replaced by python code.
src/python/m5/__init__.py:
Updates to support quiescing, checkpointing, changing memory modes, and switching CPUs.
src/python/m5/config.py:
Several functions defined on the SimObject for quiescing, changing timing modes, and switching CPUs
src/sim/main.cc:
Add some extra functions that are exported to python through SWIG.
src/sim/serialize.cc:
Change serialization around a bit. Now it is controlled through Python, so there's no need for SerializeEvents or SerializeParams.
Also add in a new unserializeAll() function that loads a checkpoint and handles unserializing all objects.
src/sim/serialize.hh:
Add unserializeAll function and a setCheckpointName function.
src/sim/sim_events.cc:
Add process() function for CountedQuiesceEvent, which calls exitSimLoop() once its counter reaches 0.
src/sim/sim_events.hh:
Add in a CountedQuiesceEvent, which is used when the system is preparing to quiesce. Any objects that can't be quiesced immediately are given a pointer to a CountedQuiesceEvent. The event has its counter set via Python, and as objects finish quiescing they call process() on the event. Eventually the event causes the simulation to stop once all objects have quiesced.
src/sim/sim_object.cc:
Add a few functions for quiescing, checkpointing, and changing memory modes.
src/sim/sim_object.hh:
Add a state variable to all SimObjects that tracks both the timing mode of the object and the quiesce state of the object. Currently this isn't serialized, and I'm not sure it needs to be so long as the timing mode starts up the same after a checkpoint.
--HG--
extra : convert_revision : a8c738d3911c68d5a7caf7de24d732dcc62cfb61
Some implementation details were left blank still, need to fill them in.
src/SConscript:
Reorder build to compile all files first
src/mem/cache/cache.hh:
src/mem/cache/cache_builder.cc:
src/mem/cache/cache_impl.hh:
src/mem/cache/coherence/coherence_protocol.cc:
src/mem/cache/coherence/uni_coherence.cc:
src/mem/cache/coherence/uni_coherence.hh:
src/mem/cache/miss/blocking_buffer.cc:
src/mem/cache/miss/miss_queue.cc:
src/mem/cache/miss/mshr.cc:
src/mem/cache/miss/mshr.hh:
src/mem/cache/miss/mshr_queue.cc:
More changesets pulled, now compiles everything in /miss directory and in the root directory
src/mem/packet.hh:
Add some more support, need to clean some of it out once everything is working
--HG--
extra : convert_revision : ba73676165810edf2c2effaf5fbad8397d6bd800
src/cpu/simple/base.cc:
add syscall emulation page table fault so we can allocate more stack pages
FaultBase::invoke will do this, we don't need to do it here
src/sim/faults.hh:
I have no idea why this #if was there... gone
src/sim/process.cc:
make stack_min actually be the current minimum
--HG--
extra : convert_revision : 9786b39f2747b94654a5d77c74243cd20503add4
src/cpu/ozone/cpu.hh:
Fixes to get OzoneCPU working in SE/FS again.
src/cpu/ozone/cpu_impl.hh:
Be sure to set up ports properly.
src/cpu/ozone/front_end.hh:
Allow port to be created without specifying its name at the beginning.
src/cpu/ozone/front_end_impl.hh:
Setup port properly, also only use checker if it's enabled.
src/cpu/ozone/lw_back_end_impl.hh:
Be sure to initialize variables.
src/cpu/ozone/lw_lsq.hh:
Handle locked flag for UP systems.
src/cpu/ozone/lw_lsq_impl.hh:
Initialize all variables.
src/python/m5/objects/OzoneCPU.py:
Fix up config.
--HG--
extra : convert_revision : c99e7bf82fc0dd1099c7a82eaebd58ab6017764d
src/cpu/o3/cpu.cc:
Updates to make sure the checker is compiled in if enabled and also to include it only when it's used.
--HG--
extra : convert_revision : c48ead5b2665dc858acd87c2ee99d39d80594a69
The changes largely are fixing up the memory accesses to use ports/Requests/Packets, supporting the splitting off of instantiation of template classes, and handling some of the reorganization that happened.
OzoneCPU is untested for now but at least compiles. Fixes will be coming shortly.
SConstruct:
Remove OzoneSimpleCPU from list of CPUs.
src/cpu/SConscript:
Leave out OzoneSimpleCPU.
src/cpu/ozone/bpred_unit.cc:
Fixes to get OzoneCPU to compile.
src/cpu/ozone/checker_builder.cc:
src/cpu/ozone/cpu.cc:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/dyn_inst.hh:
src/cpu/ozone/dyn_inst_impl.hh:
src/cpu/ozone/front_end.cc:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/ozone_impl.hh:
src/cpu/ozone/rename_table.cc:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
Fixes to get OzoneCPU back to compiling.
--HG--
extra : convert_revision : 90ffb397263bcf9fea3987317272c64f2b20f7e6
src/cpu/o3/alpha_dyn_inst_impl.hh:
Consolidate these calls into one.
src/cpu/o3/commit_impl.hh:
Include checker only if it's being used.
src/cpu/o3/fetch_impl.hh:
Do not deallocate request if it's a squashed response that was received.
src/cpu/o3/lsq_unit.hh:
Add in comment.
src/cpu/o3/lsq_unit_impl.hh:
Only include checker if it's being used.
--HG--
extra : convert_revision : aae0bf1e19baae90f1e61d41191548612bbb3be6
configs/test/SysPaths.py:
remove some tabs and add /n/poolfs/z/dist/m5/system
src/dev/io_device.cc:
fix since pio timing dma packts colud be nacked too
src/dev/io_device.hh:
move DmaReqState into DmaDevie
--HG--
extra : convert_revision : 2b5300d85ab33b3753afc54bc6a04a47b6e00d20
src/cpu/o3/alpha_cpu.hh:
Fix #define in header.
util/rundiff:
Fix file comments to be more correct.
util/tracediff:
Update comments to be more correct.
--HG--
extra : convert_revision : a28030ce8979de3d9361191c6af23743460dc53e
src/python/m5/__init__.py:
Change up options. Now setting the flag enables/disables, each of which is the opposite of the default values found in the Python class.
--HG--
extra : convert_revision : 23889b89e6105a437a74906587d90ab6ba885c97
SConstruct:
Remove check for Checker from this SConstruct
src/arch/SConscript:
Specific check if CheckerCPU is being used. Not the cleanest, but works for now.
src/cpu/SConscript:
Code to handle using the CheckerCPU a little better. Allows -c to be used normally.
--HG--
extra : convert_revision : 0a82f16db0f38e5ce114d08368477bd211331fa3
src/cpu/SConscript:
Split off instantiations into separate CC files. This makes it easier to split them per CPU model.
src/cpu/base_dyn_inst_impl.hh:
Move instantations out of impl.hh file and into a cc file.
src/cpu/checker/cpu_impl.hh:
Move instantiations over to .cc files inside each CPU's directory. Makes it easier to only use what's actually included.
src/cpu/o3/bpred_unit.cc:
Pull Ozone instantiations out of this .cc file; put them into the ozone's CC file.
src/cpu/o3/checker_builder.cc:
Instantiate Checker for O3 CPU.
src/cpu/ozone/checker_builder.cc:
Instantiate Checker for Ozone CPU.
--HG--
rename : src/cpu/base_dyn_inst.cc => src/cpu/base_dyn_inst_impl.hh
rename : src/cpu/checker/cpu.cc => src/cpu/checker/cpu_impl.hh
rename : src/cpu/checker/o3_builder.cc => src/cpu/o3/checker_builder.cc
rename : src/cpu/checker/ozone_builder.cc => src/cpu/ozone/checker_builder.cc
extra : convert_revision : 4e5f928b165379c06d31071c544ea46cf0b8fa71
src/dev/alpha_console.cc:
Remove my name twice from header
src/dev/ide_disk.cc:
Spell my full name correctly
src/mem/bus.hh:
I think I edited much of this
src/sim/byteswap.hh:
I believe most of this code is mine or nate's
--HG--
extra : convert_revision : b672b5de5492e04d2880fb51e7d63bc5587f2954
src/kern/linux/linux.hh:
src/kern/solaris/solaris.hh:
Rename BSD_HOST to the more specific NO_STAT64.
src/sim/byteswap.hh:
Replace set of swap_byte functions with a single
templated version. Hope this fixes compiler issues
with e.g. int32_t vs int disambiguation.
src/sim/syscall_emul.hh:
Rename BSD_HOST to the more specific NO_STAT64.
Set this for __CYGWIN__.
--HG--
extra : convert_revision : 86a63b4b60d2445a566321333381d79ba8ab63c4
clear from the Python side that this is the
interface to C++.
src/SConscript:
main_wrap.cc -> cc_main_wrap.cc
src/python/SConscript:
src/python/m5/__init__.py:
src/sim/main.cc:
s/main/cc_main/
src/python/m5/config.py:
s/main/cc_main/
Also directly import cc_main so we don't need
to put the "m5." in front all the time.
--HG--
extra : convert_revision : 755552f70cf671881ff31e476c677b95ef12950d
that's already being used for "detailed cpu".
Needed to add extra function for user script
to pass parsed options back to m5 module.
configs/test/fs.py:
configs/test/test.py:
Call setStandardOptions().
src/python/m5/__init__.py:
Add --outdir option.
Add setStandardOptions() so user script can
pass parsed options back to m5 module.
src/sim/main.cc:
Add SWIG-wrappable function to set output dir.
--HG--
extra : convert_revision : 1323bee69ca920c699a1cd1218e15b7b0875c1e5
SConstruct:
Fix paths in comments and other minor comment edits.
src/cpu/SConscript:
Fix path in comment.
--HG--
extra : convert_revision : c02aa9cefd8c5ad791ad2f1653c1554a4aa8ffbd
src/python/m5/__init__.py:
Add in some of the commonly used Trace/ExeTrace/Debug options. Not terribly clean but it works.
--HG--
extra : convert_revision : abb3cb4892512483a5031606baabf6540019233c
src/SConscript:
Split off FuncUnits from old FUPool so I'm not including encumbered code. This was all written by Steve Raasch so it's safe to include in the main tree.
src/cpu/o3/fu_pool.cc:
Include the func unit file that's not in the encumbered directory.
--HG--
extra : convert_revision : 9801c606961dd2d62dba190d13a76069992bf241
src/arch/alpha/isa/decoder.isa:
Surround Erik's old copy code with #ifdefs. This way the copy functions don't need to be included in the ExecContext (until somebody decides to add them back in).
--HG--
extra : convert_revision : 508ca387757a32bb616e5b4b07af17787a76970e
src/cpu/checker/cpu.cc:
Add in comment.
src/cpu/cpuevent.hh:
Fix up comment.
src/cpu/o3/bpred_unit.cc:
Comment out Ozone instantiations.
src/cpu/o3/dep_graph.hh:
Include destructor.
--HG--
extra : convert_revision : 549454ed11bc2fa49a0627f7fb8f96d00a9be303
First: Rename FullCPU and its variants in the o3 directory to O3CPU to differentiate from the old model, and also to specify it's an out of order model.
Second: Include build options for selecting the Checker to be used. These options make sure if the Checker is being used there is a CPU that supports it also being compiled.
SConstruct:
Add in option USE_CHECKER to allow for not compiling in checker code. The checker is enabled through this option instead of through the CPU_MODELS list. However it's still necessary to treat the Checker like a CPU model, so it is appended onto the CPU_MODELS list if enabled.
configs/test/test.py:
Name change for DetailedCPU to DetailedO3CPU. Also include option for max tick.
src/base/traceflags.py:
Add in O3CPU trace flag.
src/cpu/SConscript:
Rename AlphaFullCPU to AlphaO3CPU.
Only include checker sources if they're necessary. Also add a list of CPUs that support the Checker, and only allow the Checker to be compiled in if one of those CPUs are also being included.
src/cpu/base_dyn_inst.cc:
src/cpu/base_dyn_inst.hh:
Rename typedef to ImplCPU instead of FullCPU, to differentiate from the old FullCPU.
src/cpu/cpu_models.py:
src/cpu/o3/alpha_cpu.cc:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_builder.cc:
src/cpu/o3/alpha_cpu_impl.hh:
Rename AlphaFullCPU to AlphaO3CPU to differentiate from old FullCPU model.
src/cpu/o3/alpha_dyn_inst.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/alpha_impl.hh:
src/cpu/o3/alpha_params.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/cpu.hh:
src/cpu/o3/decode.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/rename.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/rob.hh:
src/cpu/o3/rob_impl.hh:
src/cpu/o3/thread_state.hh:
src/python/m5/objects/AlphaO3CPU.py:
Rename FullCPU to O3CPU to differentiate from old FullCPU model.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_unit_impl.hh:
Rename FullCPU to O3CPU to differentiate from old FullCPU model.
Also #ifdef the checker code so it doesn't need to be included if it's not selected.
--HG--
rename : src/cpu/checker/o3_cpu_builder.cc => src/cpu/checker/o3_builder.cc
rename : src/cpu/checker/cpu_builder.cc => src/cpu/checker/ozone_builder.cc
rename : src/python/m5/objects/AlphaFullCPU.py => src/python/m5/objects/AlphaO3CPU.py
extra : convert_revision : 86619baf257b8b7c8955efd447eba56e0d7acd6a
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
Updates for checker. Output more informative messages on error. Rename some functions. Add in option to warn (and not exit) on load results being incorrect.
src/cpu/checker/cpu_builder.cc:
src/cpu/checker/o3_cpu_builder.cc:
Add in parameter to warn (and not exit) on load result errors.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/lsq_unit_impl.hh:
Renamed checker functin.
--HG--
extra : convert_revision : d7aa28b8462691d20600f97a7213e2acd91c5665
Still need to add some code to fetch & commit stages
src/cpu/o3/commit.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
Add nextNPC read & set functions
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
Add nextNPC
--HG--
extra : convert_revision : 120677547d54091411399156bd066ce5baf785f7
Key was adding support for cloning port references (trickier than it sounds).
Got rid of class/instance thing and go back to instance cloning...
still don't allow changing SimObject parameters/children after a
class (instance) has been subclassed or instantiated (or cloned), which
should avoid bizarre unintended behavior.
configs/test/fs.py:
Add ".port" to busses to get a port reference.
Get rid of commented-out code.
src/python/m5/__init__.py:
resolveSimObject should call getCCObject() instead of createCCObject()
to avoid cycles in recursively creating objects.
src/python/m5/config.py:
Get rid of class/instance thing and go back to instance cloning.
Deep copy has to happen only on instance cloning then (and not on subclassing).
Add getCCObject() method to force creation of C++ SimObject without
recursively creating its children.
Add support for cloning port references (trickier than it sounds).
Also clean up some very obsolete comments.
src/python/m5/objects/Bridge.py:
src/python/m5/objects/Device.py:
Add ports.
--HG--
extra : convert_revision : 4816d05ead0de520748aace06dbd1911a33f0af8
Fix some author stuff and copyright dates
Take out full system code
src/arch/mips/isa/base.isa:
src/arch/mips/isa/bitfields.isa:
copyright info
src/arch/mips/isa/decoder.isa:
src/arch/mips/isa/formats/basic.isa:
src/arch/mips/isa/formats/branch.isa:
src/arch/mips/isa/formats/control.isa:
src/arch/mips/isa/formats/fp.isa:
src/arch/mips/isa/formats/int.isa:
src/arch/mips/isa/formats/mem.isa:
src/arch/mips/isa/formats/noop.isa:
src/arch/mips/isa/formats/tlbop.isa:
src/arch/mips/isa/formats/trap.isa:
src/arch/mips/isa/formats/unimp.isa:
src/arch/mips/isa/formats/unknown.isa:
src/arch/mips/isa/formats/util.isa:
src/arch/mips/isa/includes.isa:
src/arch/mips/isa/main.isa:
src/arch/mips/isa/operands.isa:
src/arch/mips/process.cc:
src/arch/mips/regfile/misc_regfile.hh:
src/arch/mips/stacktrace.hh:
copyright 2006
src/arch/mips/isa_traits.cc:
src/arch/mips/isa_traits.hh:
copyright 2006
take out full system
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/regfile.hh:
copyright 2006
use FloatRegVal
src/arch/mips/regfile/int_regfile.hh:
copyright 2006
move HI/LO to types.hh
src/arch/mips/types.hh:
copyright 2006
typedef FloatRegVal
--HG--
extra : convert_revision : 1d0d72cd655a4e28622745a6c6b06349da533a1d
src/arch/mips/isa/formats/trap.isa:
Take out fix that tried to fix trap
instruction disassembly. It forces bad
compile ..
configs/test/test.py:
add 'cycle' to exit message
--HG--
extra : convert_revision : 568877797fd2806416b4cbb388cc3f7eb2492627
into zazzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-release
--HG--
extra : convert_revision : 9b5b1419e8e22bce16ed97fc02c2008ca0181afc
src/cpu/base_dyn_inst.cc:
src/cpu/base_dyn_inst.hh:
Minor code cleanup by putting several bools into a bitset instead.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/rob_impl.hh:
Changed around some things in BaseDynInst.
--HG--
extra : convert_revision : 1db363d69a863cc8744cc9f9ec542ade8472eb42
into Python.
Add Port and VectorPort objects and support for
specifying port connections via assignment.
The whole C++ ConfigNode hierarchy is gone now, as are
C++ Connector objects.
configs/test/fs.py:
configs/test/test.py:
Rewrite for new port connector syntax.
src/SConscript:
Remove unneeded files:
- mem/connector.*
- sim/config*
src/dev/io_device.hh:
src/mem/bridge.cc:
src/mem/bridge.hh:
src/mem/bus.cc:
src/mem/bus.hh:
src/mem/mem_object.hh:
src/mem/physical.cc:
src/mem/physical.hh:
Allow getPort() to take an optional index to
support vector ports (eventually).
src/python/m5/__init__.py:
Move SimObject construction and port connection
operations into Python (with C++ calls).
src/python/m5/config.py:
Move SimObject construction and port connection
operations into Python (with C++ calls).
Add support for declaring and connecting MemObject
ports in Python.
src/python/m5/objects/Bus.py:
src/python/m5/objects/PhysicalMemory.py:
Add port declaration.
src/sim/builder.cc:
src/sim/builder.hh:
src/sim/serialize.cc:
src/sim/serialize.hh:
ConfigNodes are gone; builder just gets the
name of a .ini file section now.
src/sim/main.cc:
Move SimObject construction and port connection
operations into Python (with C++ calls).
Split remaining initialization operations into two parts,
loadIniFile() and finalInit().
src/sim/param.cc:
src/sim/param.hh:
SimObject resolution done globally in Python now
(not via ConfigNode hierarchy).
src/sim/sim_object.cc:
Remove unneeded #include.
--HG--
extra : convert_revision : 2fa4001eaaec0c9a4231ef6e854f8e156d930dfe
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-release
--HG--
extra : convert_revision : 78ef94172884c2db0f591c54657b28be5be7f61c
src/cpu/base_dyn_inst.cc:
Clean up some code and update.
src/cpu/base_dyn_inst.hh:
Clean up some code and update with more descriptive function names.
src/cpu/o3/alpha_cpu_builder.cc:
src/cpu/o3/alpha_params.hh:
src/cpu/o3/commit.hh:
Remove unused parameters.
src/cpu/o3/commit_impl.hh:
Remove unused parameters, also set squashCounter directly to the counted number of squashes.
src/cpu/o3/fetch_impl.hh:
Update for function name changes.
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
Remove unused parameter, move some code into a function.
--HG--
extra : convert_revision : 45abd77ad43dde2e93c2e53c4738c90ba8352a1d
src/arch/alpha/ev5.cc:
Fix memory leak. The faults are refcounted, but that only works if you're actually assigning them to a RefCountingPtr.
--HG--
extra : convert_revision : 9a57963eb5d5d86c16023bfedb0fb5ccdbe7efaa
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-release
--HG--
extra : convert_revision : 7ac7b9c9288e4940899766cd2dd55ef793d48d4d
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-release
--HG--
extra : convert_revision : 18a381fa230f2ef6d027359ffd619e3ae75cd446
Also delete no-longer-needed SPARC test.py files (should
have gone with my last chnageset where LiveProcess
became ISA-independent).
src/arch/SConscript:
Mistakenly committed hard-coded python binary name.
Should use same python to run isa_parser that was
used to run scons.
--HG--
extra : convert_revision : a3acd5496f3b930d57bb59ae164b8a4a8065bbf8
into ewok.(none):/home/gblack/m5/newmem
src/arch/sparc/regfile.hh:
Hand Merge
--HG--
extra : convert_revision : c47202689202069892524a7d71962082469996ee
bcak to main LiveProcess, then automatically select
ISA based on object file type. Now simulation scripts
no longer need to care about the ISA, as they can just
call LiveProcess().
configs/test/test.py:
Script no longer cares about ISA.
src/arch/alpha/process.cc:
src/arch/alpha/process.hh:
src/arch/mips/process.cc:
src/arch/mips/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/process.hh:
src/sim/process.cc:
src/sim/process.hh:
Move create() from arch-specific files back to
main LiveProcess, then automatically select ISA
based on object file type.
--HG--
extra : convert_revision : ef33ffdc79623b77000f5d68edd2026760b76ab6
- change include from exec_context.hh -> threadcontext.hh
- g++ 4.0.3 complaint about broken code (which it was).
- bad merge thread_context -> exec_context
src/arch/sparc/isa/includes.isa:
Fix SPARC_SE for exec_context->thread_context switch
src/arch/sparc/regfile.hh:
fix g++ 4.0.3 complaint about broken code (which it was).
src/cpu/thread_context.hh:
fix bad merge
--HG--
extra : convert_revision : f5bab822d5c25177756e9890e143b0ad8d704201
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-release
--HG--
extra : convert_revision : b73eeb1f73a5886a008919acd9e1971a79fd6bfb
src/arch/mips/isa/decoder.isa:
div,divu,ext,seb,seh, fp conditonal moves, fp indexed memory...
src/arch/mips/isa/formats/mem.isa:
MemoryNoDisp class .. use sext<> function instead of doing it manually
src/arch/mips/regfile/float_regfile.hh:
use bits function
--HG--
extra : convert_revision : cbbda9499185b91bdb2a6198fe1b961be04f9265
src/arch/mips/isa/formats/mt.isa:
change copyright to 2006
src/cpu/simple/base.cc:
Only DPRINT NNPC if we are not using ALPHA
src/cpu/static_inst.hh:
Take Out MIPS Specific functions ...
--HG--
extra : convert_revision : 7a69e80cd1564fa3b778b9dade0e9fe3cef94e64
after the class has been instantiated or subclassed.
This is one of the main situations that leads to
confusing results.
configs/test/fs.py:
Clean up to avoid modifying BaseCPU after it's been subclassed.
--HG--
extra : convert_revision : 335cb87bc3b211ecc8969cfb99ffc28f62f1f877
Provide a makeClass() method to generate a new class using
a SimObject instance as a template.
All instantiation, subclassing, and class generation is done
recursively using "deep copy"-style memoization to maintain
object relationships in the face of multiple references to
shared objects/classes.
src/python/m5/multidict.py:
Rename local dict attribute from 'dict' to 'local'
for clarity.
--HG--
extra : convert_revision : 73ed6836216308709d7bb68d09f8131acd5f1822
Minor fixes to ALPHA_FS and SPARC_SE.
SPARC_SE still does not compile... looks like there
are unresolved issues with ExecContext -> ThreadContext
rename/reorg.
configs/test/fs.py:
Port to new script interface/model.
configs/test/test.py:
Add support for running MIPS test(s) too via
command-line option.
src/arch/alpha/ev5.cc:
Fix include file.
src/arch/sparc/regfile.hh:
Make Bit64 a ULL constant to avoid compiler error.
--HG--
extra : convert_revision : c46c179758271c4f00171faaa579915846bf4624
src/python/m5/objects/FUPool.py:
src/python/m5/objects/OzoneCPU.py:
src/python/m5/objects/SimpleOzoneCPU.py:
Fix up imports (m5 namespace no longer includes m5.config).
--HG--
extra : convert_revision : 8575ef7d19ef8dfe9524723d7c4f85234d1280d2
into vm1.(none):/home/stever/bk/newmem-py
src/python/m5/__init__.py:
src/sim/syscall_emul.cc:
Hand merge.
--HG--
extra : convert_revision : e2542735323e648383c89382421d98a7d1d761bf
User script now invokes initialization and
simulation loop after building configuration.
These functions are exported from C++ to Python
using SWIG.
SConstruct:
Set up SWIG builder & scanner.
Set up symlinking of source files into build directory
(by not disabling the default behavior).
configs/test/test.py:
Rewrite to use new script-driven interface.
Include a sample option.
src/SConscript:
Set up symlinking of source files into build directory
(by not disabling the default behavior).
Add SWIG-generated main_wrap.cc to source list.
src/arch/SConscript:
Set up symlinking of source files into build directory
(by not disabling the default behavior).
src/arch/alpha/ev5.cc:
src/arch/alpha/isa/decoder.isa:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/trace/opt_cpu.cc:
src/cpu/trace/trace_cpu.cc:
src/sim/pseudo_inst.cc:
src/sim/root.cc:
src/sim/serialize.cc:
src/sim/syscall_emul.cc:
SimExit() is now exitSimLoop().
src/cpu/base.cc:
SimExitEvent is now SimLoopExitEvent
src/python/SConscript:
Add SWIG build command for main.i.
Use python/m5 in build dir as source for zip archive...
easy now with file duplication enabled.
src/python/m5/__init__.py:
- Move copyright notice back to C++ so we can print
it right away, even for interactive sessions.
- Get rid of argument parsing code; just provide default
option descriptors for user script to call optparse with.
- Don't clutter m5 namespace by sucking in all of m5.config
and m5.objects.
- Move instantiate() function here from config.py.
src/python/m5/config.py:
- Move instantiate() function to __init__.py.
- Param.Foo deferred type lookups must use m5.objects
namespace now (not m5).
src/python/m5/objects/AlphaConsole.py:
src/python/m5/objects/AlphaFullCPU.py:
src/python/m5/objects/AlphaTLB.py:
src/python/m5/objects/BadDevice.py:
src/python/m5/objects/BaseCPU.py:
src/python/m5/objects/BaseCache.py:
src/python/m5/objects/Bridge.py:
src/python/m5/objects/Bus.py:
src/python/m5/objects/CoherenceProtocol.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/DiskImage.py:
src/python/m5/objects/Ethernet.py:
src/python/m5/objects/Ide.py:
src/python/m5/objects/IntrControl.py:
src/python/m5/objects/MemObject.py:
src/python/m5/objects/MemTest.py:
src/python/m5/objects/Pci.py:
src/python/m5/objects/PhysicalMemory.py:
src/python/m5/objects/Platform.py:
src/python/m5/objects/Process.py:
src/python/m5/objects/Repl.py:
src/python/m5/objects/Root.py:
src/python/m5/objects/SimConsole.py:
src/python/m5/objects/SimpleDisk.py:
src/python/m5/objects/System.py:
src/python/m5/objects/Tsunami.py:
src/python/m5/objects/Uart.py:
Fix up imports (m5 namespace no longer includes m5.config).
src/sim/eventq.cc:
src/sim/eventq.hh:
Support for Python-called simulate() function:
- Use IsExitEvent flag to signal events that want
to exit the simulation loop gracefully (instead of
calling exit() to terminate the process).
- Modify interface to hand exit event object back to
caller so it can be inspected for cause.
src/sim/host.hh:
Add MaxTick constant.
src/sim/main.cc:
Move copyright notice back to C++ so we can print
it right away, even for interactive sessions.
Use PYTHONPATH environment var to set module path
(instead of clunky code injection method).
Move main control from here into Python:
- Separate initialization code and simulation loop
into separate functions callable from Python.
- Make Python interpreter invocation more pure (more
like directly invoking interpreter).
Add -i and -p flags (only options on binary itself;
other options processed by Python).
Import readline package when using interactive mode.
src/sim/sim_events.cc:
SimExitEvent is now SimLoopExitEvent, and uses
IsSimExit flag to terminate loop (instead of
exiting simulator process).
src/sim/sim_events.hh:
SimExitEvent is now SimLoopExitEvent, and uses
IsSimExit flag to terminate loop (instead of
exiting simulator process).
Get rid of a few unused constructors.
src/sim/sim_exit.hh:
SimExit() is now exitSimLoop().
Get rid of unused functions.
Add comments.
--HG--
extra : convert_revision : 280b0d671516b25545a6f24cefa64a68319ff3d4
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-release
--HG--
extra : convert_revision : 82b83199a36059d4b402f89f7db2de299ea59c1e
src/cpu/o3/lsq_unit_impl.hh:
Missed this name change.
src/cpu/thread_state.cc:
Fix for stats.
--HG--
extra : convert_revision : 50ea862f97f2fbc75c1c03d5700df1e8f2c0d122
use ThreadContext rename
src/arch/mips/isa/formats/branch.isa:
src/arch/mips/isa/formats/fp.isa:
src/arch/mips/isa/includes.isa:
Use ThreadContext
src/sim/syscall_emul.cc:
fcntl64 function using TC
src/sim/syscall_emul.hh:
Add fcntl64func
--HG--
extra : convert_revision : b5e2348530473704388b1c5a2b59bf78360260a9
src/cpu/o3/alpha_cpu.hh:
Remove functions no longer used for reading and writing.
--HG--
extra : convert_revision : aa2fde86ebad06a9a3a9628016b885ff546c0189
src/cpu/o3/lsq_unit.hh:
Handle being able to retry (untested but hopefully very close to working).
Handle lock flag for LL/SC hack. Hopefully the memory system will add in LL/SC soon.
Better output message.
src/cpu/o3/lsq_unit_impl.hh:
Handle being able to retry (untested but should be very close to working).
Make SC's work (hopefully) while the memory system doesn't have a LL/SC implementation.
--HG--
extra : convert_revision : bffa721b21405c88a9c6b3d9b9080957f8a2638f
implement ability for i/o devices to handle
src/dev/io_device.cc:
src/dev/io_device.hh:
implement ability for i/o devices to handle
src/mem/packet.hh:
add nacked result and a function to swizzle nacked packet into something that can be sent out again
--HG--
extra : convert_revision : fa42b01f4ab21562d37bd6bf6f4d7f69a94f0e86
when we get a virtual port delete it (even though delete does nothing in these cases)
src/arch/alpha/linux/system.cc:
src/arch/alpha/stacktrace.cc:
src/base/remote_gdb.cc:
src/cpu/simple_thread.cc:
when we get a virtual port delete it (even though delete does nothing in this case)
src/mem/port.hh:
src/mem/vport.hh:
add write/read functions that have endian conversions in them
--HG--
extra : convert_revision : 163e05cc038c461f95c92f8ce55422033f9ea513
src/cpu/o3/lsq_unit_impl.hh:
Tell checker that an instruction is completed prior once it does the access to memory.
--HG--
extra : convert_revision : 1d4bbac4b35fbd355f300eab76f29b38b5bc88cb
It still does not yet handle retries.
src/cpu/base_dyn_inst.hh:
Get working in full-system mode and fix some FP bugs.
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/thread_context.hh:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/thread_state.hh:
Get working in full system.
src/cpu/checker/o3_cpu_builder.cc:
Checker does not take a MemObject as a simobj parameter.
src/cpu/o3/alpha_dyn_inst.hh:
Fix up float regs.
src/cpu/o3/regfile.hh:
Fix up an fp error, print out more useful output messages.
--HG--
extra : convert_revision : d7cc152a051c697f18b7ee9e14050fbf3ffa5966
Following with the previous check-in, ExecContext now refers only to the interface provided to the ISA in order to access CPU state. ThreadContext refers to the interface provided to all objects outside the CPU in order to access thread state. SimpleThread provides all thread state and the interface to access it, and is suitable for simple execution models such as the SimpleCPU.
src/SConscript:
Include thread state file.
src/arch/alpha/ev5.cc:
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/thread_context.hh:
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/cpu/o3/cpu.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
Rename CPUExecContext to SimpleThread.
src/cpu/base_dyn_inst.hh:
Make thread member variables protected..
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/cpu.hh:
Make various members of ThreadState protected.
src/cpu/o3/alpha_cpu_impl.hh:
Push generation of TranslatingPort into the CPU itself.
Make various members of ThreadState protected.
src/cpu/o3/thread_state.hh:
Pull a lot of common code into the base ThreadState class.
src/cpu/ozone/thread_state.hh:
Rename CPUExecContext to SimpleThread, move a lot of common code into base ThreadState class.
src/cpu/thread_state.hh:
Push a lot of common code into base ThreadState class. This goes along with renaming CPUExecContext to SimpleThread, and making it derive from ThreadState.
src/cpu/simple_thread.cc:
Rename CPUExecContext to SimpleThread, make it derive from ThreadState. This helps push a lot of common code/state into a single class that can be used by all CPUs.
src/cpu/simple_thread.hh:
Rename CPUExecContext to SimpleThread, make it derive from ThreadState.
src/kern/system_events.cc:
Rename cpu_exec_context to thread_context.
src/sim/process.hh:
Remove unused forward declaration.
--HG--
rename : src/cpu/cpu_exec_context.cc => src/cpu/simple_thread.cc
rename : src/cpu/cpu_exec_context.hh => src/cpu/simple_thread.hh
extra : convert_revision : 2ed617aa80b64016cb9270f75352607cca032733
src/arch/alpha/regfile.hh:
Define clear functions on the individual reg files.
src/cpu/o3/regfile.hh:
Be sure to clear the misc reg file at startup.
--HG--
extra : convert_revision : 41e640887f0cf15d778c59a4dcd544d46899b527
src/cpu/o3/fetch_impl.hh:
Give the checker a pointer to the icachePort.
src/cpu/o3/lsq_unit_impl.hh:
Give the checker a pointer to the dcachePort.
src/mem/request.hh:
Allow checking for the scResult being valid prior to accessing it.
--HG--
extra : convert_revision : ced4180588d242111ecba4a11586823badd6cf15
src/cpu/base_dyn_inst.cc:
Delete the allocated data in destructor.
src/cpu/base_dyn_inst.hh:
Only copy the addresses if the translation succeeded.
src/cpu/o3/alpha_cpu.hh:
Return actual translating port.
Don't panic on setNextNPC() as it's always called, regardless of the architecture, when the process initializes.
src/cpu/o3/alpha_cpu_impl.hh:
Pass in memobject to the thread state in SE mode.
src/cpu/o3/commit_impl.hh:
Initialize all variables.
src/cpu/o3/decode_impl.hh:
Handle early resolution of branches properly.
src/cpu/o3/fetch.hh:
Switch structure back to requests.
src/cpu/o3/fetch_impl.hh:
Initialize all variables, create/delete requests properly.
src/cpu/o3/lsq_unit.hh:
Include sender state along with the packet. Also include a more generic writeback event that's only used for stores forwarding data to loads.
src/cpu/o3/lsq_unit_impl.hh:
Redo writeback code to support the response path of the memory system.
src/cpu/o3/mem_dep_unit.cc:
src/cpu/o3/mem_dep_unit_impl.hh:
Wrap variables in #ifdefs.
src/cpu/o3/store_set.cc:
Include to get panic() function.
src/cpu/o3/thread_state.hh:
Create with MemObject as well.
src/cpu/thread_state.hh:
Have a translating port in the thread state object.
src/python/m5/objects/AlphaFullCPU.py:
Mem parameter no longer needed.
--HG--
extra : convert_revision : a99381fb25cb183322882ce20935a6f3d1f2b64d
src/SConscript:
mem/request.cc no longer needed (all functions inline).
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/timing.cc:
src/dev/io_device.cc:
src/mem/port.cc:
Modified Request object interface.
src/mem/packet.hh:
Modified Request object interface.
Address & size are always set together now, so track
with single flag.
src/mem/request.hh:
Streamline interface to support a handful of calls that set
multiple fields reflecting common usage patterns.
Reduce number of validFoo booleans by combining flags for fields
which must be set together.
--HG--
extra : convert_revision : 3b499de90d6d5f12f0cc7a9a788663265677fe10
src/cpu/simple/atomic.cc:
Make common ifetch setup based on Request rather than Packet.
Packet::reset() no longer a separate function.
sendAtomic() returns latency, not absolute tick.
src/cpu/simple/atomic.hh:
sendAtomic returns latency, not absolute tick.
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
Make common ifetch setup based on Request rather than Packet.
src/dev/alpha_console.cc:
src/dev/ide_ctrl.cc:
src/dev/io_device.cc:
src/dev/isa_fake.cc:
src/dev/ns_gige.cc:
src/dev/pciconfigall.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/dev/tsunami_io.cc:
src/dev/tsunami_pchip.cc:
src/dev/uart8250.cc:
src/mem/physical.cc:
Get rid of redundant Packet time field.
src/mem/packet.cc:
Eliminate reset() method.
src/mem/packet.hh:
Fold reset() function into reinitFromRequest()... it was
only ever called together with that function.
Get rid of redundant time field.
Cleanup/add comments.
src/mem/port.hh:
Document in comment that sendAtomic returns latency, not absolute tick.
--HG--
extra : convert_revision : 0252f1a294043ca3ed58f437232ad24fc0733e0c
src/mem/port.hh:
Initialize peer port pointer to NULL.
Move private data members together.
--HG--
extra : convert_revision : dab01f81f0934758891a6b6dc2ad5328149d164b
is currently in /usr/local instead of /usr).
SConstruct:
Use information from the Python interpreter used to run scons
to find the version & paths for include & library files.
This means that linking with a different interpreter requires
invoking scons with that interpreter... add comment to that effect.
src/sim/main.cc:
Check return codes of Python interpreter calls for errors.
Get rid of include of obsolete header.
--HG--
extra : convert_revision : 90916bd8690fe1e6c9afdb0dfa1aa0d352a73a46
it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then
Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true)
Removed Port Blocked/Unblocked and replaced with sendRetry().
Remove possibility of packet mangling if packet is going to be refused anyway in bridge
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true)
src/dev/io_device.cc:
src/dev/io_device.hh:
Make DMA Timing requests/responses work.
Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true)
src/mem/bridge.cc:
src/mem/bridge.hh:
Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true)
Removed Port Blocked/Unblocked and replaced with sendRetry().
Remove posibility of packet mangling if packet is going to be refused anyway.
src/mem/bus.cc:
src/mem/bus.hh:
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since
it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then
src/mem/port.hh:
Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true)
Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method
--HG--
extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
Use embedded zip archive to carry Python code instead
of homegrown embedded string/file mechanism.
Do argument parsing in Python instead of C++.
SConstruct:
Add Python interpreter include path & library.
Define two new simple builders which copy &
concatenate files, respectively, for use by
the Python embedded zipfile code.
src/SConscript:
Encapsulate environment creation in a function.
Add code to append Python zip archive to final executable.
Eliminate references to obsolete files.
src/python/SConscript:
Rewrite to generate embedded zip archive of Python code
(replacing old "embedded string" mechanism).
src/python/m5/__init__.py:
Move main arg-parsing loop here (out of C++ main()).
src/python/m5/config.py:
Minor fix (version incompatibility?).
src/sim/main.cc:
Invoke embedded Python interpreter to parse args
and generate config.ini, replacing C++ arg parsing code.
--HG--
extra : convert_revision : 72d21236b2bee139ff39ba4cf031a4a1f8560029
src/SConscript:
src/arch/sparc/SConscript:
commit a couple of things that I forgot to last time.
--HG--
extra : convert_revision : f140912905b9d36eccc27e35ebcaf2c15611b56b
so the events can be migrated on cpu switches.
Create a new wrapper classe called CpuEventWrapper that works like the old wrapper class but calls the function with the xc
parameter
Use new CpuEventWrapper class from tick compare events on sparc
src/arch/sparc/regfile.hh:
Use new CpuEventWrapper class from tick compare events
src/arch/sparc/ua2005.cc:
Move definition to to a fullsystem only file, since it is.
src/cpu/base.cc:
On switch from one cpu to another CpuEvent::replaceExecContext() needs to be called on all (oldxc,newxc) pairs.
--HG--
extra : convert_revision : eecf4540427cc0ddf75e19a3371cf32b56cba0f5
setup all initialization stuff for UA2005
Setup fullsys build options
Start to make fullsystem compile
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
RCS to BitKeeper
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Add support for doing virtual to physical translation using the in-memory
page table
src/arch/sparc/vtophys.cc:
a tad bit of error checking
src/arch/sparc/vtophys.hh:
Cleanup of full-system global variables, primarily in simple_cpu.cc,
to allow multi-system simulations. (Multiple systems not yet yested
though.) Also changes to build sim_smt in full-system mode (though
with only SimpleCPU and not the full timing CPU for now).
Still to do: minimize changes in SimpleCPU code between full-system
and application modes... way too many ifdefs there. Much of the
full-system stuff moved into SimpleCPU should be put in a new System
object to allow multiprocessor simulations.
Converted last remaining modules from C to C++ (mostly in /old).
Renamed all .c files to .cc and a few .h files to .hh.
Renamed architecture-specific files in arch/$TARGET from
$TARGET.{cc,hh,def} to machine.{cc,hh,def} to get rid of pointless
intermediate files in object directory. Split exo-specific
definitions out of machine.hh into machine_exo.h.
Specifics:
In machine.def, null resource descriptors must be FUClamd_NA (and not
NA) to pass C++ type checking.
Enhanced error checking/reporting in bas
src/arch/sparc/vtophys.cc:
- Get rid of my String class, the Vector class, the bitvector class, and my
doubly linked list class.
- Convert tokenize, to_number (formerly StringToNumber) and eat_white to
function on stl strings.
- Change most cases of char * and const char * to string, or const string &
- Some formatting and style nits, but not too many.
src/arch/sparc/vtophys.cc:
simplify
src/arch/sparc/vtophys.cc:
Renamed SimpleCPU::(read|write)_(byte|half|word|qword) to just read &
write, overloaded on the type of the 'data' argument. Merged the
full-system and non-full-system implementations of these eight
original functions into two common template functions.
To support this, also renamed (read|write)[1248] on memory_object and
derivatives to just read & write, again overloaded on the type of the
'data' argument. Many of these functions could now be condensed into
a few template functions (though with a level of indirection so that
the interface can remain virtual). I did not do that though.
src/arch/sparc/vtophys.cc:
First pass at compiling with gcc 3.x. Lots of "std::" in header files,
"using namespace std" in source files. (Note policy of not putting "using"
statements in headers or before includes in sources.)
Still not able to compile with gcc 3.2.
Errors:
- Can't create an ifstream from a file descriptor anymore (breaks IniFile).
- "`class MSHR::MSHRegister' is private" errors in mshr.cc and prefetch_cache.cc:
not clear why since it's in the public part of the class declaration.
- cpu.cc:879: can't match a reference and 0 (specifically "no match for `bool ?
SimObjectParam<PipeTrace*>& : int' operator")
- pipetrace.cc: "invalid conversion from `int' to `std::_Ios_Fmtflags'"
Warnings:
- strstream now deprecated... needs some rewriting in sat_counter.hh
and hybrid_pred.hh (need to get all that code out of the headers anyway)
- trace.hh macro problem: cpp now says 'pasting "::" and "Event" does not
give a valid preprocessing token'
- major "implicit typename" issues in base/sized.hh
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Implement some interval statistics for full system mode.
Create a callpal function that is called when a callpal occurs so it's easier
to manipulate the statics.
Rework the vtophys stuff to make it a bit cleaner.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Get rid of almost all old-style object names. This commit is equivalent
to running the following script on the current head:
#! /bin/sh
find \( -name '*.cc' -o -name '*.hh' \) -exec perl -pi -e '\
s/\bmemory_object\b(?!\.hh)/FunctionalMemory/g;\
s/\bvirtual_memory\b(?!\.hh)/VirtualMemory/g;\
s/\bmain_memory\b(?!\.hh)/MainMemory/g;\
s/\bphysical_memory\b(?!\.hh)/PhysicalMemory/g;\
s/\bspec_memory\b(?!\.hh)/SpeculativeMemory/g;\
s/\bMemObj\b(?!\.hh)/TimingMemObj/g;\
s/\bmemory_translation\b(?!\.hh)/AddressTranslator/g;\
s/\balpha_tlb\b(?!\.hh)/AlphaTlb/g;\
s/\balpha_itb\b(?!\.hh)/AlphaItb/g;\
s/\balpha_dtb\b(?!\.hh)/AlphaDtb/g;\
s/\bmemory_controller\b(?!\.hh)/MemoryController/g;\
s/\bstorebuffer_t\b(?!\.hh)/StoreBuffer/g;\
s/\bstorebuffer_entry_t\b(?!\.hh)/StoreBufferEntry/g;\
s/\bcreate_vector_t\b(?!\.hh)/CreateVector/g;\
s/\bcv_spec_state\b(?!\.hh)/CreateVecSpecState/g;\
s/\bspec_state_list\b(?!\.hh)/SpecStateList/g;\
s/\bdyn_inst_t\b(?!\.hh)/DynInst/g;' {} \;
src/arch/sparc/vtophys.cc:
since cprintf properly deals with 64-bit types, stop using FMT* as much as
possible
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Change byte_t etc. to C99 standard int8_t etc.
Other than old/host.h, all other changes were produced by this script:
#! /bin/sh
find \( -name '*.cc' -o -name '*.hh' -o -name '*.c' -o -name '*.h' -o -name 'machine.def' \) -exec perl -pi -e '\
s/\bbyte_t\b(?!\.hh)/uint8_t/g;\
s/\bsbyte_t\b(?!\.hh)/int8_t/g;\
s/\bhalf_t\b(?!\.hh)/uint16_t/g;\
s/\bshalf_t\b(?!\.hh)/int16_t/g;\
s/\bword_t\b(?!\.hh)/uint32_t/g;\
s/\bsword_t\b(?!\.hh)/int32_t/g;\
s/\bqword_t\b(?!\.hh)/uint64_t/g;\
s/\bsqword_t\b(?!\.hh)/int64_t/g;\
s/\bbool_t\b(?!\.hh)/bool/g;\
s/\bdfloat_t\b(?!\.hh)/double/g;\
s/\bsfloat_t\b(?!\.hh)/float/g;' {} \;
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Add CVS Id tags
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Massive renaming to (almost) eliminate all md_* and MD_* names
in preparation for total exorcism of machine.def.
Most of the changes in this commit were performed with the
following perl script (perl -pi <script> <files>). A small
amount of manual fixup was needed to (mostly getting rid of
the Addr typedefs in the various memory objects now that
the former md_addr_t has that name).
# rename machine-dependent types and constants (will be moving into ISA traits object)
s/md_addr_t/Addr/g;
s/md_intreg_t/IntReg/g;
s/md_gpr_t/IntRegFile/g;
s/md_fpreg_t/FloatReg/g;
s/md_fpr_t/FloatRegFile/g;
s/md_ctrlreg_t/MiscReg/g;
s/md_ctrl_t/MiscRegFile/g;
s/md_ipr_t/InternalProcReg/g;
s/md_anyreg_t/AnyReg/g;
s/md_inst_t/MachInst/g;
s/regs_t/RegFile/g;
# manually fix declaration in old/regs.h and a few forward decls
s/struct RegFile/RegFile/g;
s/MD_NUM_IREGS/NumIntRegs/g;
s/MD_NUM_FREGS/NumFloatRegs/g;
s/MD_NUM_CREGS/NumMiscRegs/g;
s/MD_IPR_NUM/NumInternalProcRegs/g;
s/MD_TOTAL_REGS/TotalNumRegs/g;
s/MD_REG_ZERO/ZeroReg/g;
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
New ISA description system. No more machine.def!
Instructions are now decoded into StaticInst objects, and all static
instruction properties (including execution behavior) are associated
with those objects. Extended documentation in progress.
Currently supports Alpha only; PISA will not compile.
Use END_OF_MACHINE_DOT_DEF tag to extract previous version.
src/arch/sparc/vtophys.cc:
get rid of MD_IPR_foo and call it IPR_foo
add some comments to describe what the various PALtemp registers do
formatting
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
license
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
a little style
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Add attribution to license.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Make include paths explicit.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
CopyData and CopyString moved from kernel.cc to vtophys.cc
kernel.cc and kernel.hh moved to kern/tru64
src/arch/sparc/vtophys.hh:
Include isa_traits.hh for Addr
src/arch/sparc/vtophys.cc:
formatting fixes
src/arch/sparc/vtophys.cc:
fix up vtophys to deal with translations if there
is no ptbr, and to deal with PAL addresses
add ptomem which is just a wrapper for dma_addr
src/arch/sparc/vtophys.hh:
add ptomem which is a wrapper for dma_addr with the
same usage as vtomem
src/arch/sparc/vtophys.cc:
Fix to remote debugger while in PAL code
src/arch/sparc/vtophys.cc:
Remote an old hack that is now unnecessary
src/arch/sparc/vtophys.cc:
Removed buggy code that tries to fix PAL addresses (may cause problems
while trying to debug in PAL code, but that should do this fix outside
of vtophys)
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Updated Copyright
src/arch/sparc/vtophys.cc:
added back some code andrew removed and couldn't remember why.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
rename CopyData to CopyOut and implement CopyIn to copy data
from the simulator into the simulatee
src/arch/sparc/vtophys.cc:
fixed a bad merge from linux<->tru64
src/arch/sparc/vtophys.cc:
Check max address pal can be at so we don't do the wrong conversion
if gdb asks for an unaligned access.
src/arch/sparc/vtophys.cc:
PGOFSET -> ALPHA_PGOFSET to avoid include file problems
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
in the arch/alpha directory we should use arch/alpha, not
targetarch. sort includes while we're here.
src/arch/sparc/vtophys.cc:
use new constants, functions and structs to clean up the
vtophys code.
src/arch/sparc/vtophys.hh:
Clean up a little bit and make the protypes match new changes.
src/arch/sparc/vtophys.cc:
deal with isa addition
src/arch/sparc/vtophys.cc:
shuffle files around for new directory structure
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Remove RCS Id string
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Update copyright dates and author list
src/arch/sparc/vtophys.cc:
Added a using directive for AlphaISA
src/arch/sparc/vtophys.hh:
Added the AlphaISA namespace specifier where needed
src/arch/sparc/vtophys.hh:
Made Addr a global type
src/arch/sparc/vtophys.cc:
Change access to the IPR to go through the XC.
src/arch/sparc/vtophys.cc:
Avoid directly accessing objects within the XC.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
fixed for new memory system
put in namespace AlphaISA
src/arch/alpha/vtophys.cc:
src/arch/alpha/vtophys.hh:
Remove authors from copyright.
src/arch/sparc/vtophys.cc:
bk cp alpha/vtophys.cc sparc/vtophys.cc
src/arch/sparc/vtophys.hh:
bk cp alpha/vtophys.hh sparc/vtophys.hh
src/arch/sparc/SConscript:
remove fullsystem files that don't exist
src/arch/sparc/isa_traits.hh:
split off fullsystem and se iprs into two functions to remove lots of #ifs
src/arch/sparc/regfile.hh:
split off fullsystem and se iprs into two functions to remove lots of #ifs
setup all initialization stuff for UA2005
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
Add system level tick storage to make stick be syncronized across multiple processors
src/arch/sparc/vtophys.hh:
start to create a vtophys for Sparc
src/base/loader/symtab.hh:
Addr is defined in sim/host.hh
--HG--
extra : convert_revision : ae4658e6bc2e2b51d7fb1c711d069ffe99e1377d
Rip out storage in miscreg file that will never store anything
Add storage and defines for Priv and Hyperpriv registers
Change defines to match the spec register numbers
Change the way misc registers are named to match the spec with offsets to deal with ASR/PR/HPR/FSR.
Change contextval to an int since both global registers and windowed registers are indexed by int in UA2005.
Use bitfields for things that are rarely used in decoder
Instead of decoding ASR/PR/HPR and having a specfic instruction, use a generic instruction instead
Still todo:
Protect rdpr, rdhpr, wrpr, wrhpr with checks that fault in insufficient privs
Deal with signaling interrupts on timer expiration
Deal with writes to softint/PIL generating interrupts how those are vectored to the CPU
Other misc:
Instruction decoding needs major help!
src/arch/sparc/isa/decoder.isa:
Remove tons of MISCREG_XXXX defines that weren't used and ControlRegs in that were never used. Ones that were used rarely
changed to bitfields.
src/arch/sparc/isa/formats/integerop.isa:
These seems like a whole lot of overkill in printing, but i'll leave it the way it is for now. Allow Ccr to be set
at once
src/arch/sparc/isa/formats/priv.isa:
PrivTick is handled by miscreg now, don't need a seperate class for it
src/arch/sparc/isa/operands.isa:
prune the number of control regs down to a reasonable amount
src/arch/sparc/isa_traits.hh:
Replace 8 defines with 1 and flick some bits
src/arch/sparc/process.cc:
Better to clean the entire registers that specific bits which leads to indetermanistic behavior.
src/arch/sparc/regfile.hh:
Rip out storage that will never be backed by anything
Add storage for Priv and Hyperpriv registers
change defines to match the spec
change the way misc registers are named to match the spec with offsets to deal with ASR/PR/HPR/FSR.
change contextval to an int since both global registers and windowed registers are indexed by int in UA2005.
--HG--
extra : convert_revision : 64276a3ea884eea70112e721f85a515946ded4c2
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
Move traceData->finalize() into postExecute().
src/cpu/simple/timing.cc:
Fixes for full system. Now boots Alpha Linux!
- Handle ifetch faults, suspend/resume.
- Delete memory request & packet objects on response.
- Don't try to do split memory accesses on prefetch references
(ISA description doesn't support this).
src/cpu/simple/timing.hh:
Minor reorganization of internal methods.
--HG--
extra : convert_revision : 59e3ee5e4cb53c424ebdbe2e504d97e88c08a978
Store original source & senderState for timing packets
that get a response, so we can properly route the
response packet back to the original sender.
--HG--
extra : convert_revision : 03dbcc8dc06d93de243bfcdc3cbaa012773c6782
src/base/traceflags.py:
Sort flags so you can find things.
Add BusAddrRanges flag for tracking RangeChange events
separately from general bus activity.
src/mem/bus.cc:
Add BusAddrRanges flag for tracking RangeChange events
separately from general bus activity.
src/mem/port.cc:
src/mem/port.hh:
Print Config trace message when peers are set up.
--HG--
extra : convert_revision : d7c11d5f90c8de5c8d97e473501a268a567e9e44
- new constructor guarantees initialization of most fields
- flags track status of non-guaranteed fields (addr, size, src)
- accessor functions (getAddr() etc.) check status on access
- Command & Result classes are nested in Packet class scope
- Command now built from vector of behavior bits
- string version of Command for tracing
- reinitFromRequest() and makeTimingResponse() encapsulate
common manipulations of existing packets
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/timing.cc:
src/dev/alpha_console.cc:
src/dev/ide_ctrl.cc:
src/dev/io_device.cc:
src/dev/io_device.hh:
src/dev/isa_fake.cc:
src/dev/ns_gige.cc:
src/dev/pciconfigall.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/dev/tsunami_io.cc:
src/dev/tsunami_pchip.cc:
src/dev/uart8250.cc:
src/mem/bus.cc:
src/mem/bus.hh:
src/mem/physical.cc:
src/mem/port.cc:
src/mem/port.hh:
src/mem/request.hh:
Update for new Packet interface.
--HG--
extra : convert_revision : 9973d09ea4fa61795f23772a7d3995fa4df5c269
Need to rewrite bus bridge to get any further.
src/dev/io_device.cc:
Set packet dest on timing responses.
src/mem/bus.cc:
Fix dest addr bounds check assertion.
Add assertion to catch infinite loopbacks.
src/mem/physical.cc:
Add comment.
--HG--
extra : convert_revision : 419b65a3a61e2d099884dbda117b338dffd80896
It doesn't compile, and if we really want this we should
start over from scratch and see if we can reuse parts from
BaseSimpleCPU (e.g., derive a FastSimpleCPU).
SConstruct:
src/arch/SConscript:
src/cpu/cpu_models.py:
Get rid of FastCPU model.
--HG--
extra : convert_revision : f3f0362f7292bf21e8e0d4d84c475be8a9789a0c
src/arch/sparc/isa/formats/nop.isa:
Fix nop header so we can compile with multiple CPU models.
(Former code re-defined Nop object for each model.)
--HG--
extra : convert_revision : 04e92622edf4dfefd9e149a17f604e17a93707c9
SConstruct:
Clean up libelf handling. Required better handling of
per-build-root stuff in general (though libelf is the
only thing in that category currently).
src/SConscript:
No libelf-specific stuff in here anymore.
src/base/loader/elf_object.cc:
Just need to include gelf.h... it includes libelf.h.
--HG--
extra : convert_revision : 3d6bdcf8233bda0ac8d08ff777de323df8aa45ae
