Commit graph

856 commits

Author SHA1 Message Date
Nilay Vaish
e979e8d75e stats: changes due to recent changesets. 2015-01-04 13:02:12 -06:00
Andreas Hansson
df8df4fd0a stats: Bump stats for decoder, TLB, prefetcher and DRAM changes
Changes due to speculative execution of an unaligned PC, introduction
of TLB stats, changes and re-work of the prefetcher, and the
introduction of rank-wise refresh in the DRAM controller.
2014-12-23 09:31:20 -05:00
Andreas Hansson
e76e8e28a3 tests: Add a regression for the stack distance calculator
Re-use the existing traffic generator regression, and enable the stack
distance calculation in the comm monitor, along with the verification
stack.

The traffic generator config is also tuned to not increase the
run-time too much (and actually have some address re-use).
2014-12-23 09:31:18 -05:00
Andreas Hansson
6489598fb4 stats: Bump stats for fixes, mostly TLB and WriteInvalidate 2014-12-02 06:08:25 -05:00
Andreas Hansson
726f626e87 stats: Bump stats for o3 LSQ changes 2014-12-02 06:08:05 -05:00
Andreas Hansson
b0aa5a326d stats: Bump stats after static analysis fixes
Fixing up the uninitialised values changes two of the x86 Linux boot
regressions slightly.
2014-11-24 09:03:39 -05:00
Gabe Black
2d2a5aa410 x86: Update stats for the new Linux delay port. 2014-11-21 17:22:19 -08:00
Gabe Black
994c44035d x86: Update the stats for the x86 FS o3 boot test. 2014-11-17 00:16:36 -08:00
Andreas Hansson
4583a5114a stats: Bump regressions to match latest changes
Updates after timezone hick-up and sorting of dictionary items in the
SimObject.
2014-11-12 09:05:25 -05:00
Nilay Vaish
02b4605da0 stats: changes to x86 o3 fs and sparc fs regression tests. 2014-11-11 14:17:10 -06:00
Marc Orr
3947f88d0f tests: A test program for the new mwait implementation.
This is a simple test program for the new mwait implemenation. It is uses
m5threads to create to threads of execution in syscall emulation mode that
interact using the mwait instruction.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-11-06 05:42:21 -06:00
Nilay Vaish
a75e27b4a6 stats: updates due to changes to ruby 2014-11-06 05:42:21 -06:00
Nilay Vaish
3022d463fb ruby: interface with classic memory controller
This patch is the final in the series.  The whole series and this patch in
particular were written with the aim of interfacing ruby's directory controller
with the memory controller in the classic memory system.  This is being done
since ruby's memory controller has not being kept up to date with the changes
going on in DRAMs.  Classic's memory controller is more up to date and
supports multiple different types of DRAM.  This also brings classic and
ruby ever more close.  The patch also changes ruby's memory controller to
expose the same interface.
2014-11-06 05:42:21 -06:00
Nilay Vaish
95a0b18431 ruby: single physical memory in fs mode
Both ruby and the system used to maintain memory copies.  With the changes
carried for programmed io accesses, only one single memory is required for
fs simulations.  This patch sets the copy of memory that used to reside
with the system to null, so that no space is allocated, but address checks
can still be carried out.  All the memory accesses now source and sink values
to the memory maintained by ruby.
2014-11-06 05:41:44 -06:00
Ali Saidi
ae82551496 tests: Update stats no match.
Bootloader I had on my sytem was an older version with a couple of
instruction differences.
2014-11-03 10:14:42 -06:00
Ali Saidi
2c2c3a4ce9 arm, tests: Forgot the system.terminal files for the new regressions. 2014-10-30 00:04:12 -05:00
Ali Saidi
29cd50e14e arm, tests: Add 64-bit ARM regression tests 2014-10-29 23:50:15 -05:00
Ali Saidi
93c0307d41 tests: Update regressions for the new kernels and various preceeding fixes. 2014-10-29 23:18:29 -05:00
Ali Saidi
f2db2a96d1 arm, tests: Update config files to more recent kernels and create 64-bit regressions.
This changes the default ARM system to a Versatile Express-like system that supports
2GB of memory and PCI devices and updates the default kernels/file-systems for
AArch64 ARM systems (64-bit) to support up to 32GB of memory and PCI devices. Some
platforms that are no longer supported have been pruned from the configuration files.

In addition a set of 64-bit ARM regressions have been added to the regression system.
2014-10-29 23:18:27 -05:00
Nilay Vaish
d2a0f60b69 stats: updates due to previous mmap and exit_group patches. 2014-10-20 16:48:19 -05:00
Andreas Hansson
a63ba6c7b7 stats: Small bump of trailing stats
Somehow these seem to have been missed.
2014-10-16 05:49:31 -04:00
Nilay Vaish
1efe42fa97 stats: updates due to changes to x86, stale configs. 2014-10-11 16:18:51 -05:00
Andreas Hansson
0746e92cd3 stats: Add DRAM power statistics to reference output 2014-10-09 17:52:13 -04:00
Andreas Hansson
ff2d58f935 stats: Update stats to reflect ARM fixes
As a result of the fixes, the full-system dual-core ARM regressions
are slightly changed. Hopefully this also means there will no longer
be any discrepancies between the results observed on different hosts.
2014-09-28 16:53:48 -04:00
Steve Reinhardt
71d5f03175 stats: update t1000 stats for recent changes 2014-09-21 23:04:39 -04:00
Steve Reinhardt
8649757135 stats: update eio stats for recent changes 2014-09-21 16:15:14 -04:00
Andreas Hansson
c4e91289ae stats: Bump stats for filter, crossbar and config changes
This patch bumps the stats to reflect the addition of the snoop filter
and snoop stats, the change from bus to crossbar, and the updates to
the ARM regressions that are now using a different CPU and cache
configuration. Lastly, some minor changes are expected due to the
activation cleanup of the CPUs.
2014-09-20 17:18:53 -04:00
Andreas Hansson
2b0438a11e tests: Use more representative configs for ARM tests
This patch changes the CPU and cache configurations used in the ARM SE and FS
regressions to make them more representative, and also get better code
coverage by exercising different replacement policies and use an L2
prefetcher.
2014-09-20 17:18:33 -04:00
Andreas Hansson
1f6d5f8f84 mem: Rename Bus to XBar to better reflect its behaviour
This patch changes the name of the Bus classes to XBar to better
reflect the actual timing behaviour. The actual instances in the
config scripts are not renamed, and remain as e.g. iobus or membus.

As part of this renaming, the code has also been clean up slightly,
making use of range-based for loops and tidying up some comments. The
only changes outside the bus/crossbar code is due to the delay
variables in the packet.

--HG--
rename : src/mem/Bus.py => src/mem/XBar.py
rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc
rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh
rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc
rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh
rename : src/mem/bus.cc => src/mem/xbar.cc
rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 17:18:32 -04:00
Andreas Hansson
1884bcc03b tests: Add a memtest version using the ideal SnoopFilter
This patch adds a basic regression test for the snoop filter.

--HG--
rename : tests/configs/memtest.py => tests/configs/memtest-filter.py
2014-09-20 17:18:30 -04:00
Curtis Dunham
e553ca67d4 tests: automatically kill regressions that take too long
When GNU coreutils 'timeout' is available, limit each regression
simulation to 4 hours.
2014-08-25 14:32:00 -05:00
Andreas Hansson
8d18713d28 stats: Minor update of Minor stats after uncacheable fix 2014-09-12 10:22:50 -04:00
Andreas Hansson
a217eba078 stats: Update stats for CPU and cache changes
This patch updates the stats to reflect the fixes and changes to the
CPU (mainly the o3), and the caches.
2014-09-03 07:42:59 -04:00
Andreas Hansson
db430698bf tests: Use medium dataset for perlbmk regressions
This patch changes the perlbmk regression script from the large to the
medium dataset to reduce the regression run time. For all ISAs and CPU
models, the total perlbmk host CPU time with the large dataset is
roughly 12 hours (constituting >30% of the total regression host
time). There is, most likely, almost no added value in terms of code
coverage for this rather excessive run time.
2014-09-03 07:42:57 -04:00
Andreas Hansson
351e146b37 alpha: Stop using 'inorder' and rely entirely on 'minor'
This patch avoids building the 'inorder' CPU model for any permutation
of ALPHA, and also removes the ALPHA regressions using the 'inorder'
CPU. The 'minor' CPU is already providing a broader test coverage.
2014-09-03 07:42:56 -04:00
Andreas Hansson
ee68c2b302 tests: Use O3_ARM_v7a config for full-system ARM regressions
This patch changes the CPU configuration used for the full-system ARM
regressions to increase the test coverage. Note that it is only the
core configuration, and not the caches etc.
2014-09-03 07:42:41 -04:00
Nilay Vaish
fa1fbcf020 stats: updates due to recent ruby and x86 changes
Also updates many out of date config files.
2014-09-01 16:55:52 -05:00
Emilio Castillo ext:(%2C%20Nilay%20Vaish%20%3Cnilay%40cs.wisc.edu%3E)
01f792a367 ruby: Fixes clock domains in configuration files
This patch fixes scripts related to ruby by adding the ruby clock domain.
Now the L1 controllers and  the Sequencer shares the cpu clock domain,
while the rest of the components use the ruby clock domain.

Before this patch, running simulations with the cpu clock set at 2GHz or
1GHz will output the same time results and could distort power measurements.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-09-01 16:55:30 -05:00
Andreas Hansson
cbf417c713 stats: Bump stats for the regressions using the minor CPU
Updating the stats to match the current behaviour.
2014-07-28 01:48:21 -04:00
Andrew Bardsley
5d0b25ba3f cpu: Minor CPU add regression tests for ARM and ALPHA
This patch adds regression tests results and test harnesses
for the Minor CPU on ARM and ALPHA.
2014-07-23 16:09:05 -05:00
Steve Reinhardt
040fa23d01 stats: update for syscall DPRINTF change
Only printing one rather than two args for the ignored syscall
warning means the count of register accesses has changed on
a few runs.  Oddly only Alpha Tru64 seems to have any ignored
syscalls in the regression tests.
2014-07-19 19:04:58 -07:00
Steve Reinhardt
5b08e211ab stats: update for O3 changes
Mostly small differences in total ticks, but O3 stall causes
shifted significantly.

30.eon does speed up by ~6% on Alpha and ARM, and 50.vortex
by 4.5% on ARM.  At the other extreme, X86 70.twolf is 0.8%
slower.
2014-06-22 14:33:09 -07:00
Nilay Vaish
2a8088f5ae stats: changes due to recent o3 patch. 2014-05-24 21:30:46 -05:00
Nilay Vaish
0aaa7d10d8 stats: changes due to o3 cpu and ruby message buffer patches 2014-05-23 06:07:02 -05:00
Steve Reinhardt
72403cb595 tests: update t1000 & pc-switcheroo-full stats
committed reference config.json files too
2014-05-12 17:22:17 -04:00
Steve Reinhardt
2136feaa55 tests: update eio ref outputs for new stats
Also committed reference config.json files for
the eio tests.
2014-05-10 22:13:51 -04:00
Andreas Hansson
57e5401d95 stats: Bump stats for the fixes, and mostly DRAM controller changes 2014-05-09 18:58:50 -04:00
Andreas Hansson
64806c4c13 tests: Reflect name change in DRAM tests
This patch reflects the recent name change in the DRAM TrafficGen
tests and also tidies up the test directory.

--HG--
rename : tests/configs/tgen-simple-dram.py => tests/configs/tgen-dram-ctrl.py
rename : tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/config.ini => tests/quick/se/70.tgen/ref/null/none/tgen-dram-ctrl/config.ini
rename : tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/simerr => tests/quick/se/70.tgen/ref/null/none/tgen-dram-ctrl/simerr
rename : tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/simout => tests/quick/se/70.tgen/ref/null/none/tgen-dram-ctrl/simout
rename : tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/stats.txt => tests/quick/se/70.tgen/ref/null/none/tgen-dram-ctrl/stats.txt
rename : tests/quick/se/70.tgen/tgen-simple-dram.cfg => tests/quick/se/70.tgen/tgen-dram-ctrl.cfg
2014-05-09 18:58:49 -04:00
Curtis Dunham
fe27f937aa arch: teach ISA parser how to split code across files
This patch encompasses several interrelated and interdependent changes
to the ISA generation step.  The end goal is to reduce the size of the
generated compilation units for instruction execution and decoding so
that batch compilation can proceed with all CPUs active without
exhausting physical memory.

The ISA parser (src/arch/isa_parser.py) has been improved so that it can
accept 'split [output_type];' directives at the top level of the grammar
and 'split(output_type)' python calls within 'exec {{ ... }}' blocks.
This has the effect of "splitting" the files into smaller compilation
units.  I use air-quotes around "splitting" because the files themselves
are not split, but preprocessing directives are inserted to have the same
effect.

Architecturally, the ISA parser has had some changes in how it works.
In general, it emits code sooner.  It doesn't generate per-CPU files,
and instead defers to the C preprocessor to create the duplicate copies
for each CPU type.  Likewise there are more files emitted and the C
preprocessor does more substitution that used to be done by the ISA parser.

Finally, the build system (SCons) needs to be able to cope with a
dynamic list of source files coming out of the ISA parser. The changes
to the SCons{cript,truct} files support this. In broad strokes, the
targets requested on the command line are hidden from SCons until all
the build dependencies are determined, otherwise it would try, realize
it can't reach the goal, and terminate in failure. Since build steps
(i.e. running the ISA parser) must be taken to determine the file list,
several new build stages have been inserted at the very start of the
build. First, the build dependencies from the ISA parser will be emitted
to arch/$ISA/generated/inc.d, which is then read by a new SCons builder
to finalize the dependencies. (Once inc.d exists, the ISA parser will not
need to be run to complete this step.) Once the dependencies are known,
the 'Environments' are made by the makeEnv() function. This function used
to be called before the build began but now happens during the build.
It is easy to see that this step is quite slow; this is a known issue
and it's important to realize that it was already slow, but there was
no obvious cause to attribute it to since nothing was displayed to the
terminal. Since new steps that used to be performed serially are now in a
potentially-parallel build phase, the pathname handling in the SCons scripts
has been tightened up to deal with chdir() race conditions. In general,
pathnames are computed earlier and more likely to be stored, passed around,
and processed as absolute paths rather than relative paths.  In the end,
some of these issues had to be fixed by inserting serializing dependencies
in the build.

Minor note:
For the null ISA, we just provide a dummy inc.d so SCons is never
compelled to try to generate it. While it seems slightly wrong to have
anything in src/arch/*/generated (i.e. a non-generated 'generated' file),
it's by far the simplest solution.
2014-05-09 18:58:47 -04:00
Sascha Bischoff
e940bac278 mem: Auto-generate CommMonitor trace file names
Splits the CommMonitor trace_file parameter into three parameters. Previously,
the trace was only enabled if the trace_file parameter was set, and would be
written to this file. This patch adds in a trace_enable and trace_compress
parameter to the CommMonitor.

No trace is generated if trace_enable is set to False. If it is set to True, the
trace is written to a file based on the name of the SimObject in the simulation
hierarchy. For example, system.cluster.il1_commmonitor.trc. This filename can be
overridden by additionally specifying a file name to the trace_file parameter
(more on this later).

The trace_compress parameter will append .gz to any filename if set to True.
This enables compression of the generated traces. If the file name already ends
in .gz, then no changes are made.

The trace_file parameter will override the name set by the trace_enable
parameter. In the case that the specified name does not end in .gz but
trace_compress is set to true, .gz is appended to the supplied file name.
2014-05-09 18:58:46 -04:00
Andreas Hansson
0c75581d03 stats: updates for pc-switcheroo-full due to o3 smt fix 2014-04-22 03:12:15 -04:00
Nilay Vaish
3bc5cfcc03 stats: updates due to o3 smt fix
+ changes to one ruby regression config.ini file.
2014-04-19 09:16:14 -05:00
Andreas Hansson
8b4b1dcb86 stats: Update stats for DRAM changes
This patch updates the stats to reflect the changes to the DRAM
controller.
2014-03-23 11:12:19 -04:00
Nilay Vaish
83d09ee215 stats: updates due to changes to ruby config scripts
These updates to ruby regression stats are due to renaming piobus to iobus
and dropping piobus in the se mode.
2014-03-20 09:16:35 -05:00
Nilay Vaish
b5cc4c7604 config: ruby: rename _cpu_ruby_ports to _cpu_ports 2014-03-20 09:14:14 -05:00
Nilay Vaish
d5b5d89b34 config: remove ruby_fs.py
The patch removes the ruby_fs.py file.  The functionality is being moved to
fs.py.  This would being ruby fs simulations in line with how ruby se
simulations are started (using --ruby option).  The alpha fs config functions
are being combined for classing and ruby memory systems.  This required
renaming the piobus in ruby to iobus.  So, we will have stats being renamed
in the stats file for ruby fs regression.
2014-03-20 08:03:09 -05:00
Nilay Vaish
9b3418d163 ruby: no piobus in se mode
Piobus was recently added to se scripts for ruby so that the interrupt
controller can be connected to something (required since the interrupt
controller sends address range messages).  This patch removes the piobus
and instead, the pio port of ruby port will now ignore the range change
messages in se mode.
2014-03-20 08:03:09 -05:00
Nilay Vaish
53f697a616 stats: updates due to c0db268f811b 2014-02-24 20:50:06 -06:00
Nilay Vaish
8504b079b8 ruby: correct errors in changeset 4eec7bdde5b0
Couple of errors were discovered in 4eec7bdde5b0 which necessitated this patch.
Firstly, we create interrupt controllers in the se mode, but no piobus was
being created.  RubyPort, which earlier used to ignore range changes now
forwards those to the piobus.  The lack of piobus resulted in segmentation
fault.  This patch creates a piobus even in se mode.  It is not created only
when some tester is running.  Secondly,  I had missed out on modifying port
connections for other coherence protocols.
2014-02-24 20:50:05 -06:00
Nilay Vaish
3b404fb1a0 stats: updates due to changes to ruby pio access handling 2014-02-23 19:16:16 -06:00
Nilay Vaish
7e27860ef4 ruby: route all packets through ruby port
Currently, the interrupt controller in x86 is connected to the io bus
directly.  Therefore the packets between the io devices and the interrupt
controller do not go through ruby.  This patch changes ruby port so that
these packets arrive at the ruby port first, which then routes them to their
destination.  Note that the patch does not make these packets go through the
ruby network.  That would happen in a subsequent patch.
2014-02-23 19:16:16 -06:00
Andreas Hansson
fd9343eb85 arm: Bump stats after FS config script update
This patch updates the stats to reflect the change in kernel options
needed for armv8 (but used for all FS regressions).
2014-02-19 07:59:46 -05:00
Nilay Vaish
5abbb84f02 stats: updates due to branch predictor warming 2014-02-16 11:40:34 -06:00
Nilay Vaish
fa0ff1c902 stats: update sparc fs stats 2014-01-27 13:30:37 -06:00
Steve Reinhardt
85016c2d45 stats: update eio stats for recent changes 2014-01-27 00:38:58 -05:00
Ali Saidi
cfb805cc71 stats: update stats for ARMv8 changes 2014-01-24 15:29:34 -06:00
Ali Saidi
f3585c841e stats: update stats for cache occupancy and clock domain changes 2014-01-24 15:29:33 -06:00
Nilay Vaish
fc6d1f3399 stats: updates due to changes to ruby 2014-01-10 16:19:58 -06:00
Nilay Vaish
bb6d7d402b ruby: rename MESI_CMP_directory to MESI_Two_Level
This is because the next patch introduces a three level hierarchy.

--HG--
rename : build_opts/ALPHA_MESI_CMP_directory => build_opts/ALPHA_MESI_Two_Level
rename : build_opts/X86_MESI_CMP_directory => build_opts/X86_MESI_Two_Level
rename : configs/ruby/MESI_CMP_directory.py => configs/ruby/MESI_Two_Level.py
rename : src/mem/protocol/MESI_CMP_directory-L1cache.sm => src/mem/protocol/MESI_Two_Level-L1cache.sm
rename : src/mem/protocol/MESI_CMP_directory-L2cache.sm => src/mem/protocol/MESI_Two_Level-L2cache.sm
rename : src/mem/protocol/MESI_CMP_directory-dir.sm => src/mem/protocol/MESI_Two_Level-dir.sm
rename : src/mem/protocol/MESI_CMP_directory-dma.sm => src/mem/protocol/MESI_Two_Level-dma.sm
rename : src/mem/protocol/MESI_CMP_directory-msg.sm => src/mem/protocol/MESI_Two_Level-msg.sm
rename : src/mem/protocol/MESI_CMP_directory.slicc => src/mem/protocol/MESI_Two_Level.slicc
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/config.ini => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/config.ini
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/ruby.stats
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/simerr => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/simerr
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/simout => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/simout
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/stats.txt
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/system.pc.com_1.terminal => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/system.pc.com_1.terminal
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/config.ini => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/config.ini
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/ruby.stats
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/simerr => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/simerr
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/simout => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/simout
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/stats.txt
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/config.ini => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/config.ini
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/ruby.stats
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/simerr => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/simerr
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/simout => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/simout
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/stats.txt
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/config.ini => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/config.ini
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/ruby.stats
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/simerr => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/simerr
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/simout => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/simout
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/stats.txt
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/config.ini => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/config.ini
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/ruby.stats
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/simerr => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/simerr
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/simout => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/simout
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/stats.txt
2014-01-04 00:03:33 -06:00
Steve Reinhardt
a212844f67 config, x86: move kernel specification from tests to FSConfig.py
For some reason, the default x86 kernel is specified in
tests/configs/x86_generic.py and not in configs/common/FSConfig.py,
where the kernels for all the other ISAs are.  This means that
running configs/example/fs.py for x86 fails because no kernel
is specified.  Moving the specification over fixes this problem.

There is another problem that this uncovers, which is that going
past the init stage (i.e., past where the regression test stops)
fails because the fsck test on the disk device fails, but that's
a separate issue.
2014-01-03 17:08:44 -08:00
Nilay Vaish
e6008b6bc1 stats: updates due to bug fixed in mesi coherence protocol 2013-12-26 15:18:58 -06:00
Nilay Vaish
2823982a3c stats: updates due to changes to ticksToCycles() 2013-11-26 17:05:25 -06:00
Steve Reinhardt
a2c21d47a8 tests: suppress output on switcheroo tests
The output from the switcheroo tests is voluminous and
(because it includes timestamps) highly sensitive to
minor changes, leading to extremely large updates to the
reference outputs.  This patch addresses this problem
by suppressing output from the tests.  An internal
parameter can be set to enable the output.  Wiring that
up to a command-line flag (perhaps even the rudimantary
-v/-q options in m5/main.py) is left for future work.
2013-11-14 15:03:42 -08:00
Andreas Hansson
ccfdc533b9 stats: Bump stats to match DRAM controller changes
This patch encompasses all the stats updates needed to reflect the
changes to the DRAM controller.
2013-11-01 11:56:34 -04:00
Andreas Hansson
0e6ced5c4f stats: Bump stats after shifting to SimpleMemory
Match stats with new regression configs.
2013-11-01 11:56:15 -04:00
Andreas Hansson
9145e2cfd4 test: Use SimpleMemory for atomic full-system tests
Keep it simple and use the SimpleMemory rather than the DRAM
controller model for atomic full-system tests.
2013-11-01 11:56:14 -04:00
Steve Reinhardt
10e6450120 test: update stats
Update stats for recent changes.  Mostly minor changes
in register access stats due to addition of new cc
register type and slightly different (and more accurate)
classification of int vs. fp register accesses.
2013-10-16 10:44:12 -04:00
Steve Reinhardt
fe61a074a2 scons: fix minor update-ref bug in regressions
In the unusual case that regressions are run with --update-ref
when there is no existing regression output, scons gets
confused because it depends on stats.txt to trigger the
update, but it has no indication that running the test will
generate the stats.txt file.  (In the typical case where
stats.txt already exists, scons doesn't care about where
it came from.)

It's easy to fix this just by adding the stats.txt file
to the target list for the test action.
2013-10-15 18:22:41 -04:00
Andreas Hansson
a44bb59192 stats: Bump pc-simple-timing-ruby stats
This patch simply brings the stats for the pc-simple-timing-ruby
regression up to date. The particular regression seems to give
different results on different systems unfortunately, and this update
reflects the current behaviour on zizzer.
2013-10-09 04:41:19 -04:00
Andreas Sandberg
0438bf9389 stats: Update x86 stats after x87 fixes
The updates to the x87 caused the stats for several regressions to
change. This was mainly caused by the addition of a working 32-bit and
80-bit FP load instruction and xsave support.
2013-10-02 11:03:38 +02:00
Steve Reinhardt
fbc1feb39a tests: update reference outputs
Apparently only stats.txt was updated the last time, so
this changeset updates other reference output files
(config.ini, simout, simerr, ruby.stats) so that
test output diffs should not be cluttered with irrelevant
changes.  There are a few stats.txt updates too, but
they are in the minority.
2013-09-28 15:25:17 -04:00
Nilay Vaish
143dfa31df stats: update sparc fs due to recent changes to memory class. 2013-09-15 13:45:59 -05:00
Nilay Vaish
ff87a0dd9c stats: ruby: updates due to recent changes. 2013-09-06 16:21:36 -05:00
Andreas Hansson
0495b7e9e7 tests: Move ISA-independent tests to the NULL ISA
This patch simply takes a first step to use the NULL ISA build for
tests that do not make use of a CPU. Most of the Ruby tests could go
the same way, but to avoid duplicating a lot of compilation targets
that will have to wait until Ruby is built as a library and linked in
independently.

--HG--
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest/config.ini => tests/quick/se/50.memtest/ref/null/none/memtest/config.ini
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest/simerr => tests/quick/se/50.memtest/ref/null/none/memtest/simerr
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest/simout => tests/quick/se/50.memtest/ref/null/none/memtest/simout
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest/stats.txt => tests/quick/se/50.memtest/ref/null/none/memtest/stats.txt
rename : tests/quick/se/70.tgen/ref/arm/linux/tgen-simple-dram/simerr => tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/simerr
rename : tests/quick/se/70.tgen/ref/arm/linux/tgen-simple-dram/simout => tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/simout
rename : tests/quick/se/70.tgen/ref/arm/linux/tgen-simple-dram/stats.txt => tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/stats.txt
rename : tests/quick/se/70.tgen/ref/arm/linux/tgen-simple-mem/simerr => tests/quick/se/70.tgen/ref/null/none/tgen-simple-mem/simerr
rename : tests/quick/se/70.tgen/ref/arm/linux/tgen-simple-mem/simout => tests/quick/se/70.tgen/ref/null/none/tgen-simple-mem/simout
rename : tests/quick/se/70.tgen/ref/arm/linux/tgen-simple-mem/stats.txt => tests/quick/se/70.tgen/ref/null/none/tgen-simple-mem/stats.txt
2013-09-04 13:22:57 -04:00
Steve Reinhardt
dc18352e3c stats: update eio stats 2013-08-24 12:03:10 -04:00
Nilay Vaish
e351e846e3 stats: update ruby.stats, config.ini files for x86 fs test 2013-08-20 11:32:33 -05:00
Nilay Vaish
c4e7e18eeb ruby: add option for number of transitions per cycle
The number of transitions per cycle that a controller can carry out is
a proxy for the number of ports that a controller has. This value is
currently 32 which is way too high. The patch introduces an option
for the number of ports and uses this option in the protocol files
to set the number of transitions. The default value is being set to
4. None of the se regressions change. Ruby stats for the fs regression
change and are being updated.
2013-08-20 11:32:31 -05:00
Andreas Hansson
b63631536d stats: Cumulative stats update
This patch updates the stats to reflect the: 1) addition of the
internal queue in SimpleMemory, 2) moving of the memory class outside
FSConfig, 3) fixing up of the 2D vector printing format, 4) specifying
burst size and interface width for the DRAM instead of relying on
cache-line size, 5) performing merging in the DRAM controller write
buffer, and 6) fixing how idle cycles are counted in the atomic and
timing CPU models.

The main reason for bundling them up is to minimise the changeset
size.
2013-08-19 03:52:36 -04:00
Andreas Hansson
49d88f08b0 mem: Change AbstractMemory defaults to match the common case
This patch changes the default parameter value of conf_table_reported
to match the common case. It also simplifies the regression and config
scripts to reflect this change.
2013-08-19 03:52:33 -04:00
Akash Bagdia
e7e17f92db power: Add voltage domains to the clock domains
This patch adds the notion of voltage domains, and groups clock
domains that operate under the same voltage (i.e. power supply) into
domains. Each clock domain is required to be associated with a voltage
domain, and the latter requires the voltage to be explicitly set.

A voltage domain is an independently controllable voltage supply being
provided to section of the design. Thus, if you wish to perform
dynamic voltage scaling on a CPU, its clock domain should be
associated with a separate voltage domain.

The current implementation of the voltage domain does not take into
consideration cases where there are derived voltage domains running at
ratio of native voltage domains, as with the case where there can be
on-chip buck/boost (charge pumps) voltage regulation logic.

The regression and configuration scripts are updated with a generic
voltage domain for the system, and one for the CPUs.
2013-08-19 03:52:28 -04:00
Andreas Hansson
a8480fe1c3 config: Move the memory instantiation outside FSConfig
This patch moves the instantiation of the memory controller outside
FSConfig and instead relies on the mem_ranges to pass the information
to the caller (e.g. fs.py or one of the regression scripts). The main
motivation for this change is to expose the structural composition of
the memory system and allow more tuning and configuration without
adding a large number of options to the makeSystem functions.

The patch updates the relevant example scripts to maintain the current
functionality. As the order that ports are connected to the memory bus
changes (in certain regresisons), some bus stats are shuffled
around. For example, what used to be layer 0 is now layer 1.

Going forward, options will be added to support the addition of
multi-channel memory controllers.
2013-08-19 03:52:27 -04:00
Nilay Vaish
ba440f1cb9 regressions: update a couple stats.txt
The statistics for 30.eio-mp, pc-simple-timing-ruby tests are being updated
to incorporate the changes due to recent patches.
2013-07-02 10:11:00 -05:00
Nilay Vaish
af58313fd6 regressions: update a couple of configs
The configs for pc-simple-timing-ruby, t1000-simple-atomic had not been
updated correctly in the patch 6e6cefc1db1f.
2013-07-02 10:10:58 -05:00
Andreas Hansson
5a15909bac stats: Update stats for monitor, cache and bus changes
This patch removes the sparse histogram total from the CommMonitor
stats. It also bumps the stats after the unit fixes in the atomic
cache access. Lastly, it updates the stats to match the new port
ordering. All numbers are the same, and the only thing that changes is
which master corresponds to what port index.
2013-06-27 05:49:51 -04:00
Akash Bagdia
7d7ab73862 sim: Add the notion of clock domains to all ClockedObjects
This patch adds the notion of source- and derived-clock domains to the
ClockedObjects. As such, all clock information is moved to the clock
domain, and the ClockedObjects are grouped into domains.

The clock domains are either source domains, with a specific clock
period, or derived domains that have a parent domain and a divider
(potentially chained). For piece of logic that runs at a derived clock
(a ratio of the clock its parent is running at) the necessary derived
clock domain is created from its corresponding parent clock
domain. For now, the derived clock domain only supports a divider,
thus ensuring a lower speed compared to its parent. Multiplier
functionality implies a PLL logic that has not been modelled yet
(create a separate clock instead).

The clock domains should be used as a mechanism to provide a
controllable clock source that affects clock for every clocked object
lying beneath it. The clock of the domain can (in a future patch) be
controlled by a handler responsible for dynamic frequency scaling of
the respective clock domains.

All the config scripts have been retro-fitted with clock domains. For
the System a default SrcClockDomain is created. For CPUs that run at a
different speed than the system, there is a seperate clock domain
created. This domain incorporates the CPU and the associated
caches. As before, Ruby runs under its own clock domain.

The clock period of all domains are pre-computed, such that no virtual
functions or multiplications are needed when calling
clockPeriod. Instead, the clock period is pre-computed when any
changes occur. For this to be possible, each clock domain tracks its
children.
2013-06-27 05:49:49 -04:00
Andreas Hansson
4de3205afa config: Add a BaseSESystem builder for re-use in regressions
This patch extends the existing system builders to also include a
syscall-emulation builder. This builder is deployed in all
syscall-emulation regressions that do not involve Ruby,
i.e. o3-timing, simple-timing and simple-atomic, as well as the
multi-processor regressions o3-timing-mp, simple-timing-mp and
simple-atomic-mp (the latter are only used by SPARC at this point).

The values chosen for the cache sizes match those that were used in
the existing config scripts (despite being on the large
side). Similarly, a mem_class parameter is added to the builder base
class to enable simple-atomic to use SimpleMemory and o3-timing to use
the default DDR3 configuration.

Due to the different order the ports are connected, the bus stats get
shuffled around for the multi-processor regressions. A separate patch
bumps the port indices. Besides this, all behaviour is exactly the
same.
2013-06-27 05:49:49 -04:00
Akash Bagdia
076d04a653 config: Add a system clock command-line option
This patch adds a 'sys_clock' command-line option and use it to assign
clocks to the system during instantiation.

As part of this change, the default clock in the System class is
removed and whenever a system is instantiated a system clock value
must be set. A default value is provided for the command-line option.

The configs and tests are updated accordingly.
2013-06-27 05:49:49 -04:00
Akash Bagdia
7eccb1b779 config: Remove redundant explicit setting of default clocks
This patch removes the explicit setting of the clock period for
certain instances of CoherentBus, NonCoherentBus and IOCache where the
specified clock is same as the default value of the system clock. As
all the values used are the defaults, there are no performance
changes. There are similar cases where the toL2Bus is set to use the
parent CPU clock which is already the default behaviour.

The main motivation for these simplifications is to ease the
introduction of clock domains.
2013-06-27 05:49:49 -04:00
Andreas Hansson
f821c5472b tests: Prune 00.gzip from the regressions
This patch prunes the 00.gzip regressions with the main motivation
being that it adds little (or no) coverage and requires a substantial
amount of run time.

A complete regression run, including compilation from a clean repo, is
almost 20% faster(!).
2013-06-27 05:49:49 -04:00
Andreas Hansson
718fb40709 scons: Identify runs that fail and runs with stats differences
This patch changes the regression script such that it is possible to
identify the runs that fail with an exit code, and those that finish
with stats differences. The ones that truly fail are reported as
FAILED, and those that finish with changed stats as CHANGED.

The yellow colour has been reclaimed from the skipped regressions and
is now used for the changed ones. With no obvious good option left the
skipped ones are now in cyan.

While I was editing the script I also bumped any occurence of M5 to
gem5.
2013-06-27 05:49:49 -04:00
Nilay Vaish
a1e18270a1 stats: updates due to changes to stat collection in ruby 2013-06-25 00:32:04 -05:00
Andreas Hansson
beee57070a stats: Bump x86 stats
This patch bumps the x86 stats to reflect the recent fixes.
2013-06-24 14:17:22 -04:00
Nilay Vaish
247e4e9ab4 stats: updates due to changes to ruby
Ruby's controller statistics have been mostly moved to stats.txt now.
Plus stats.txt for solaris/t1000-simple-atomic and arm/20.parser are
also being updated.
2013-06-10 06:46:20 -05:00
Steve Reinhardt
bd39adfa98 Updating EIO regression reference outputs for new stats. 2013-06-08 10:28:33 -04:00
Andreas Hansson
74553c7d3f stats: Update the stats to reflect bus and memory changes
This patch updates the stats to reflect the addition of the bus stats,
and changes to the bus layers. In addition it updates the stats to
match the addition of the static pipeline latency of the memory
conotroller and the addition of a stat tracking the bytes per
activate.
2013-05-30 12:54:18 -04:00
Andreas Hansson
3bc4ecdcb4 mem: More descriptive DRAM config names
This patch changes the class names of the variuos DRAM configurations
to better reflect what memory they are based on. The speed and
interface width is now part of the name, and also the alias that is
used to select them on the command line.

Some minor changes are done to the actual parameters, to better
reflect the named configurations. As a result of these changes the
regressions change slightly and the stats will be bumped in a separate
patch.
2013-05-30 12:54:14 -04:00
Nilay Vaish
af2e83c7f1 x86, regressions: updates stats
This is due to op class, function call, walker patches.
2013-05-21 11:41:27 -05:00
Nilay Vaish
5b49c3d255 stats: updates statistics for ruby regressions 2013-05-21 11:32:57 -05:00
Andreas Hansson
9f8b1aec49 config: Added memory type to t1000 regression
This patch adds the memory type parameter to the t1000 regression.
2013-04-28 17:14:39 -04:00
Nilay Vaish
c2d799c6b0 x86: regressions: add switcher full test 2013-04-23 00:03:09 -05:00
Nilay Vaish
3295e6de69 x86, stats: updates due to lret bugfix 2013-04-23 00:03:05 -05:00
Andreas Hansson
3477d60d5c config: Add a mem-type config option to se/fs scripts
This patch enables selection of the memory controller class through a
mem-type command-line option. Behind the scenes, this option is
treated much like the cpu-type, and a similar framework is used to
resolve the valid options, and translate the short-hand description to
a valid class.

The regression scripts are updated with a hardcoded memory class for
the moment. The best solution going forward is probably to get the
memory out of the makeSystem functions, but Ruby complicates things as
it does not connect the memory controller to the membus.

--HG--
rename : configs/common/CpuConfig.py => configs/common/MemConfig.py
2013-04-22 13:20:33 -04:00
Ali Saidi
d69f904a18 stats: Update stats for O3 switching fix. 2013-04-22 13:20:33 -04:00
Andreas Sandberg
dc83d23425 tests: Add support for testing KVM-based CPUs
This changeset adds support for initializing a KVM VM in the
BaseSystem test class and adds the following methods in run.py:

require_file -- Test if a file exists and abort/skip if not.
require_kvm -- Test if KVM support has been compiled into gem5 (i.e.,
	       BaseKvmCPU exists) and the KVM device exists on the
	       host.
2013-04-22 13:20:32 -04:00
Andreas Sandberg
5f2361f3af arm: Enable support for triggering a sim panic on kernel panics
Add the options 'panic_on_panic' and 'panic_on_oops' to the
LinuxArmSystem SimObject. When these option are enabled, the simulator
panics when the guest kernel panics or oopses. Enable panic on panic
and panic on oops in ARM-based test cases.
2013-04-22 13:20:31 -04:00
Andreas Hansson
5dd23833fd stats: Update stats for ldr_ret_uop (changeset 35198406dd72)
This patch merely bumps the stats to match the changes introduced in
changeset 35198406dd72.
2013-04-19 09:04:42 -04:00
Andreas Hansson
c704b7be16 stats: Bump the vortex stats to match latest behaviour
This patch bumps the stats for the failing vortex o3 regression.
2013-04-16 06:26:49 -04:00
Joel Hestness
53b713fb4b stats: Bump Ruby stats for new changesets
The new changeset that can reorder Ruby profilers will cause the ruby.stats
files to reordered statistics (the point of the patch). Update the references
to ensure that these changes are reflected in regressions.
2013-04-09 16:41:12 -05:00
Nilay Vaish
26e96b90e1 regressions: updates due to changes to o3 cpu, x86 memory map 2013-03-29 14:05:36 -05:00
Nilay Vaish
1af9369779 regressions: update eio stats due to cache latency fix 2013-03-28 09:32:01 -05:00
Nilay Vaish
4646369afd regressions: update due to cache latency fix 2013-03-27 18:36:21 -05:00
Andreas Hansson
a84d026538 stats: Update stats for cache retry event check
This patch updates the stats for the affected stats. All the changes
are minimal (in the <0.01% range).
2013-03-26 14:47:03 -04:00
Andreas Hansson
08f7a8bc00 stats: Update stats to reflect bus retry changes
This patch updates the stats after splitting the bus retry into
waiting for the bus and waiting for the peer.
2013-03-26 14:46:49 -04:00
Nilay Vaish
04fe6b486a regressions: updates to config.ini for ruby tests 2013-03-22 17:21:25 -05:00
Nilay Vaish
53a0597805 regressions: x86: stats updates due to new x87 insts 2013-03-11 17:45:09 -05:00
Nilay Vaish
d24d5446c5 regressions: stats updates due to no physmem in ruby 2013-03-06 21:57:10 -06:00
Nilay Vaish
c061819890 ruby: remove the functional copy of memory in se mode
This patch removes the functional copy of the memory that was maintained in
the se mode. Now ruby itself will provide the data.
2013-03-06 21:53:57 -06:00
Ali Saidi
09b2430e95 stats: update patches for branch predictor and fetch updates. 2013-03-04 23:33:47 -05:00
Andreas Hansson
cb9e208a4c stats: Update stats to reflect SimpleDRAM changes
This patch bumps the stats to reflect the slight change in how the
retry is handled, and also the pruning of some redundant stats.
2013-03-01 13:20:30 -05:00
Ali Saidi
a86f67e706 stats: more zizzer stats fun 2013-02-19 09:53:07 -05:00
Ali Saidi
bd31a5dc18 stats: update regressions for o3 changes in renaming and translation. 2013-02-15 17:40:14 -05:00
Andreas Sandberg
e5dca84c3f config: Move CPU handover logic to m5.switchCpus()
CPU switching consists of the following steps:
 1. Drain the system
 2. Switch out old CPUs (cpu.switchOut())
 3. Change the system timing mode to the mode the new CPUs require
 4. Flush caches if switching to hardware virtualization
 5. Inform new CPUs of the handover (cpu.takeOverFrom())
 6. Resume the system

m5.switchCpus() previously only did step 2 & 5. Since information
about the new processors' memory system requirements is now exposed,
do all of the steps above.

This patch adds automatic memory system switching and flush (if
needed) to switchCpus(). Additionally, it adds optional draining to
switchCpus(). This has the following implications:

* changeToTiming and changeToAtomic are no longer needed, so they have
  been removed.

* changeMemoryMode is only used internally, so it is has been renamed
  to be private.

* switchCpus requires a reference to the system containing the CPUs as
  its first parameter.

WARNING: This changeset breaks compatibility with existing
configuration scripts since it changes the signature of
m5.switchCpus().
2013-02-15 17:40:08 -05:00
Nilay Vaish
1962e9262d regressions: update stats due to changes to ruby 2013-02-10 21:43:23 -06:00
Andreas Hansson
fce3433b2e stats: Update stats for regressions using SimpleDDR3
This patch updates the regression stats to reflect that they are using
the SimpleDDR3 controller by default.
2013-01-31 07:49:16 -05:00
Andreas Hansson
c4898b15bc mem: Add DDR3 and LPDDR2 DRAM controller configurations
This patch moves the default DRAM parameters from the SimpleDRAM class
to two different subclasses, one for DDR3 and one for LPDDR2. More can
be added as we go forward.

The regressions that previously used the SimpleDRAM are now using
SimpleDDR3 as this is the most similar configuration.
2013-01-31 07:49:14 -05:00
Andreas Hansson
093fc6707f stats: Fix naming (BPredUnit to branchPred) for 20.parser ARM o3
This patch bumps the stats for 20.parser for ARM o3-timing to reflect
a namechange of the branch predictor.
2013-01-28 07:44:26 -05:00
Nilay Vaish
9bc132e473 regressions: update stats due to branch predictor changes
The actual statistical values are being updated for only two tests belonging
to sparc architecture and inorder cpu: 00.hello and 02.insttest. For others
the patch updates config.ini and name changes to statistical variables.
2013-01-24 12:29:00 -06:00
Nilay Vaish
4526f33062 x86 regressions: updates due to new instructions and cpuid 2013-01-15 07:43:23 -06:00
Nilay Vaish
7fdcfdf08b regressions: update stats due to changes in ruby obj hierarchy 2013-01-14 10:20:16 -06:00
Andreas Hansson
5b90902437 stats: Bump failing x86 regression stats
This patch bumps the stats of mcf and twolf for the o3 CPU such that
the regressions pass.
2013-01-14 10:23:54 -05:00
Ali Saidi
fbeced6135 stats: update stats for previous six changes 2013-01-08 08:54:16 -05:00
Ali Saidi
9f15510c2c stats: update stats for previous changes. 2013-01-07 13:05:54 -05:00
Andreas Sandberg
5fb00e1df6 tests: Add CPU switching tests
This changeset adds a set of tests that stress the CPU switching
code. It adds the following test configurations:

 * tsunami-switcheroo-full -- Alpha system (atomic, timing, O3)
 * realview-switcheroo-atomic -- ARM system (atomic<->atomic)
 * realview-switcheroo-timing -- ARM system (timing<->timing)
 * realview-switcheroo-o3 -- ARM system (O3<->O3)
 * realview-switcheroo-full -- ARM system (atomic, timing, O3)

Reference data is provided for the 10.linux-boot test case. All of the
tests trigger a CPU switch once per millisecond during the boot
process.

The in-order CPU model was not included in any of the tests as it does
not support CPU handover.
2013-01-07 13:05:52 -05:00
Andreas Sandberg
e23850dd07 tests: Update the ignore regexps to reflect the M5->gem5 name change 2013-01-07 13:05:45 -05:00
Andreas Hansson
e65de3f5ca config: Do not use hardcoded physmem in fs script
This patch generalises the address range resolution for the I/O cache
and I/O bridge such that they do not assume a single memory. The patch
involves adding a parameter to the system which is then defined based
on the memories that are to be visible from the I/O subsystem, whether
behind a cache or a bridge.

The change is needed to allow interleaved memory controllers in the
system.
2013-01-07 13:05:38 -05:00
Andreas Hansson
1da209140c cpu: Add support for protobuf input for the trace generator
This patch adds support for reading input traces encoded using
protobuf according to what is done in the CommMonitor.

A follow-up patch adds a Python script that can be used to convert the
previously used ASCII traces to protobuf equivalents. The appropriate
regression input is updated as part of this patch.
2013-01-07 13:05:37 -05:00
Andreas Sandberg
9c5ef235cc tests: Add support for skipping tests, skip EIO tests if not enabled
The EIO tests depend on the EIO support from the "encumbered"
repository, which means that they are not normally built with
gem5. This causes all EIO related tests to fail, which is both
annoying and confusing. This patch addresses this by adding support
for skipping tests if certain conditions (e.g., the presence of a
SimObject) can not be met. It introduces the following Python
functions that can be called from within a test case:

  * skip_test -- Skip a test and optionally print why the test was
                 skipped.

  * has_sim_object -- Test if a SimObject exists.

  * require_sim_object -- Test if a SimObject exists and skip, or
                          optionally fail, the test if not.

Additionally, this patch updates the EIO tests to check for the
presence of EioProcess.
2013-01-07 13:05:37 -05:00
Andreas Hansson
f456c7983d mem: Add tracing support in the communication monitor
This patch adds packet tracing to the communication monitor using a
protobuf as the mechanism for creating the trace.

If no file is specified, then the tracing is disabled. If a file is
specified, then for every packet that is successfully sent, a protobuf
message is serialized to the file.
2013-01-07 13:05:37 -05:00
Andreas Hansson
79b4477302 stats: Update DRAM regression stats to match new config
This patch updates the regression stats to reflect the change in the
traffic gen configuration.
2013-01-07 13:05:36 -05:00
Andreas Hansson
7216681561 config: Reduce DRAM controller regression traffic rate
This patch changes the traffic generator period such that it does not
completely saturate the DRAM controller and create an ever-growing
backlog in the queued port.

A separate patch updates the stats.
2013-01-07 13:05:36 -05:00
Andreas Sandberg
3db3f83a5e arch: Make the ISA class inherit from SimObject
The ISA class on stores the contents of ID registers on many
architectures. In order to make reset values of such registers
configurable, we make the class inherit from SimObject, which allows
us to use the normal generated parameter headers.

This patch introduces a Python helper method, BaseCPU.createThreads(),
which creates a set of ISAs for each of the threads in an SMT
system. Although it is currently only needed when creating
multi-threaded CPUs, it should always be called before instantiating
the system as this is an obvious place to configure ID registers
identifying a thread/CPU.
2013-01-07 13:05:35 -05:00
Ali Saidi
90bd20aae2 tests: Always specify memory mode in every test system.
Previous to this change we didn't always set the memory mode which worked as
long as we never attempted to switch CPUs or checked that a CPU was in a
memory system with the correct mode. Future changes will make CPUs verify
that they're operating in the correct mode and thus we need to always set it.
2013-01-07 13:05:33 -05:00
Andreas Sandberg
f32f372455 tests: Create base classes to encapsulate common test configurations
Most of the test cases currently contain a large amount of duplicated
boiler plate code. This changeset introduces a set of classes that
encapsulates most of the functionality when setting up a test
configuration.

The following base classes are introduced:
* BaseSystem - Basic system configuration that can be used for both
               SE and FS simulation.

* BaseFSSystem - Basic FS configuration uni-processor and multi-processor
                 configurations.

* BaseFSSystemUniprocessor - Basic FS configuration for uni-processor
                             configurations. This is provided as a way
			     to make existing test cases backwards
			     compatible.

Architecture specific implementations are provided for ARM, Alpha, and
X86.
2013-01-07 13:05:33 -05:00
Nilay Vaish
5ebe3210d8 regressions: stats update due to decoder changes 2013-01-04 19:00:48 -06:00
Nilay Vaish
1945f9963d x86 regressions: stats update due to new x87 instructions 2012-12-30 12:45:52 -06:00
Nilay Vaish
3b01edd7fa arm regressions: updates to config.ini, terminal files 2012-12-12 09:51:55 -06:00
Nilay Vaish
141ee38794 regressions: stats update due to stats from ruby prefetcher 2012-12-11 10:06:01 -06:00
Nilay Vaish
2fca1af71f regression test: update a couple of config.ini files 2012-12-06 10:26:12 -06:00
Nilay Vaish
2680c827be regressions: stats update due to ruby functional access patch 2012-11-10 17:18:02 -06:00
Ali Saidi
1dbf9bb4ca update stats for preceeding changes 2012-11-02 11:50:06 -05:00
Andreas Hansson
4e984e0962 stats: Update stats for fixed simple-atomic-mp config
This patch updates the stats for the regressions that were affected by
the typo in the simple-atomic-mp configuration.
2012-10-31 08:39:45 -04:00
Andreas Hansson
ab0bd51315 config: Fix a typo in the simple-atomic-mp configuration
This patch fixes a minor typo that managed to sneak into the
simple-atomic-mp regression configuration.
2012-10-31 08:39:43 -04:00
Andreas Hansson
10b70d5452 stats: Update stats for unified cache configuration
This patch updates the stats to reflect the changes in the L2 MSHRs,
as the latter are now uniform across the regressions.
2012-10-30 09:35:32 -04:00
Andreas Hansson
9cbe1cb653 config: Unify caches used in regressions and adjust L2 MSHRs
This patch unified the L1 and L2 caches used throughout the
regressions instead of declaring different, but very similar,
configurations in the different scripts.

The patch also changes the default L2 configuration to match what it
used to be for the fs and se scripts (until the last patch that
updated the regressions to also make use of the cache config). The
MSHRs and targets per MSHR are now set to a more realistic default of
20 and 12, respectively.

As a result of both the aforementioned changes, many of the regression
stats are changed. A follow-on patch will bump the stats.
2012-10-30 07:44:08 -04:00
Nilay Vaish
30f5bf5f23 regressions: update stats for ruby fs test 2012-10-27 16:05:06 -05:00
Andreas Hansson
651de2d9af config: Fix the cache class naming in regression scripts
This patch unifies the naming of the default L1 and L2 caches in the
regression configs to be in line with what is used in the se and fs
scripts.
2012-10-26 06:42:42 -04:00
Andreas Hansson
b387d8e213 stats: Update the stats to reflect the 1GHz default system clock
This patch updates the stats to reflect the change in the default
system clock from 1 THz to 1GHz. The changes are due to the DMA
devices now injecting requests at a lower pace.
2012-10-25 13:15:59 -04:00
Andreas Hansson
8fe556338d stats: Update stats to reflect use of SimpleDRAM
This patch bumps the stats to match the use of SimpleDRAM instead of
SimpleMemory in all inorder and O3 regressions, and also all
full-system regressions. A number of performance-related stats change,
and a whole bunch of stats are added for the memory controller.
2012-10-25 13:14:42 -04:00
Andreas Hansson
66e331c7bb config: Use SimpleDRAM in full-system, and with o3 and inorder
This patch favours using SimpleDRAM with the default timing instead of
SimpleMemory for all regressions that involve the o3 or inorder CPU,
or are full system (in other words, where the actual performance of
the memory is important for the overall performance).

Moving forward, the solution for FSConfig and the users of fs.py and
se.py is probably something similar to what we use to choose the CPU
type. I envision a few pre-set configurations SimpleLPDDR2,
SimpleDDR3, etc that can be choosen by a dram_type option. Feedback on
this part is welcome.

This patch changes plenty stats and adds all the DRAM controller
related stats. A follow-on patch updates the relevant statistics. The
total run-time for the entire regression goes up with ~5% with this
patch due to the added complexity of the SimpleDRAM model. This is a
concious trade-off to ensure that the model is properly tested.
2012-10-25 13:14:38 -04:00
Andreas Hansson
d22796c03c config: Use shared cache config for regressions
This patch uses the common L1, L2 and IOCache configuration for the
regressions that all share the same cache parameters. There are a few
regressions that use a slightly different configuration (memtest,
o3-timing=mp, simple-atomic-mp and simple-timing-mp), and the latter
are not changed in this patch. They will be updated in a future patch.

The common cache configurations are changed to match the ones used in
the regressions, and are slightly changed with respect to what they
were. Hopefully this means we can converge on a common base
configuration, used both in the normal user configurations and
regressions.

As only regressions that shared the same cache configuration are
updated, no regressions are affected.
2012-10-25 04:32:44 -04:00
Andreas Hansson
a4329af937 stats: Update stats for DMA port send
This patch updates the stats after removing the zero-time send used in
the DMA port.
2012-10-23 04:49:48 -04:00
Andreas Hansson
37ded2c2cc stats: Update t1000 stats to match recent changes
This patch brings the t1000 stats up to date.
2012-10-23 04:24:32 -04:00
Nilay Vaish
de3b3ed140 regressions: update stats for eio tests 2012-10-16 14:47:31 -05:00
Nilay Vaish
b6b5cde132 regressions: update stats due to change to ruby memory system 2012-10-15 19:13:59 -05:00
Andreas Hansson
d52adc4eb6 Stats: Update stats for cache timings in cycles
This patch updates the stats to reflect the change in how cache
latencies are expressed. In addition, the latencies are now rounded to
multiples of the clock period, thus also affecting other stats.
2012-10-15 08:12:21 -04:00
Andreas Hansson
88554790c3 Mem: Use cycles to express cache-related latencies
This patch changes the cache-related latencies from an absolute time
expressed in Ticks, to a number of cycles that can be scaled with the
clock period of the caches. Ultimately this patch serves to enable
future work that involves dynamic frequency scaling. As an immediate
benefit it also makes it more convenient to specify cache performance
without implicitly assuming a specific CPU core operating frequency.

The stat blocked_cycles that actually counter in ticks is now updated
to count in cycles.

As the timing is now rounded to the clock edges of the cache, there
are some regressions that change. Plenty of them have very minor
changes, whereas some regressions with a short run-time are perturbed
quite significantly. A follow-on patch updates all the statistics for
the regressions.
2012-10-15 08:10:54 -04:00
Andreas Hansson
d17f5084ed Stats: Update memtest stats after setting clock
This patch updates the memtest stats to reflect the addition of a
clock other than the default one.
2012-10-15 08:10:52 -04:00
Andreas Hansson
072a91ee51 Configs: Set the memtest clock to a reasonable value
This patch changes the memtest clock from 1THz (the default) to 2GHz,
similar to the CPUs in the other regressions. This is useful as the
caches will adopt the same clock as the CPU. The bus clock rate is
scaled accordingly, and the L1-L2 bus is kept at the CPU clock while
the memory bus is at half that frequency.

A separate patch updates the affected stats.
2012-10-15 08:09:57 -04:00
Andreas Hansson
54227f9e57 Stats: Update stats for new default L1-to-L2 bus clock and width
This patch updates the stats to reflect the changes in the clock speed
and width for the bus connecting the L1 and L2 caches.
2012-10-15 08:09:54 -04:00
Andreas Hansson
a850fc916f Stats: Update stats for use of two-level builder
This patch updates the name of the l2 stats.
2012-10-15 08:08:06 -04:00
Andreas Hansson
3cf733bcc0 Regression: Use addTwoLevelCacheHierarchy in configs
This patch unifies the full-system regression config scripts and uses
the BaseCPU convenience method addTwoLevelCacheHierarchy to connect up
the L1s and L2, and create the bus inbetween.

The patch is a step on the way to use the clock period to express the
cache latencies, as the CPU is now the parent of the L1, L2 and L1-L2
bus, and these modules thus use the CPU clock.

The patch does not change the value of any stats, but plenty names,
and a follow-up patch contains the update to the stats, chaning
system.l2c to system.cpu.l2cache.
2012-10-15 08:07:09 -04:00
Nilay Vaish
0de0ce106a Regression Tests: Update statistics 2012-10-02 14:35:46 -05:00
Ali Saidi
91e74beee6 ARM: update stats for bp and squash fixes. 2012-09-25 11:49:41 -05:00
Mrinmoy Ghosh
6fc0094337 Cache: add a response latency to the caches
In the current caches the hit latency is paid twice on a miss. This patch lets
a configurable response latency be set of the cache for the backward path.
2012-09-25 11:49:41 -05:00
Andreas Hansson
4f8ad7aa05 Stats: Update stats for twosys-tsunami after setting CPU clock
This patch updates the stats to reflect the addition of a clock
period other than the default 1 Tick.
2012-09-24 18:03:43 -04:00
Andreas Hansson
103a4a049c Regression: Set the clock for twosys-tsunami CPUs
This patch merely adds a clock other than the default 1 Tick for the
CPUs of both the test system and drive system for the twosys-tsunami
regression.

The CPU frequency of the driver system is choosed to be twice that of
the test system to ensure it is not the bottleneck (although in this
case it mostly serves as a demonstration of a two-system setup),
2012-09-24 18:03:41 -04:00
Andreas Hansson
6427342318 SimpleDRAM: A basic SimpleDRAM regression
--HG--
rename : tests/configs/tgen-simple-mem.py => tests/configs/tgen-simple-dram.py
rename : tests/quick/se/70.tgen/tgen-simple-mem.cfg => tests/quick/se/70.tgen/tgen-simple-dram.cfg
rename : tests/quick/se/70.tgen/tgen-simple-mem.trc => tests/quick/se/70.tgen/tgen-simple-dram.trc
2012-09-21 11:48:14 -04:00
Andreas Hansson
efea870fce TrafficGen: Add a basic traffic generator regression
This patch adds a basic regression for the traffic generator. The
regression also serves as an example of the file formats used. More
complex regressions that make use of a DRAM controller model will
follow shortly.
2012-09-21 11:48:11 -04:00
Andreas Hansson
d2b57a7473 Stats: Update stats to reflect SimpleMemory bandwidth
This patch simply bumps the stats to reflect the introduction of a
bandwidth limit of 12.8GB/s for SimpleMemory.
2012-09-18 10:30:04 -04:00
Andreas Hansson
ae1652b813 Stats: Remove the reference stats that are no longer present
This patch simply removes the commitCommittedInsts and
commitCommittedOps from the reference statistics, following their
removal from the CPU.
2012-09-13 08:02:55 -04:00
Nilay Vaish
fe5deb4a22 x86 Regressions: Update stats due to register predication 2012-09-11 09:34:40 -05:00
Nilay Vaish
5cdf221d8c Regression: Updates due to changes to Ruby memory controller 2012-09-10 12:44:03 -05:00
Andreas Hansson
0b1108c7a3 Ruby: Bump the stats after recent memory controller changes
This patch simply bumps the stats to avoid having failing
regressions. Someone with more insight in the changes should verify
that these differences all make sense.
2012-09-10 11:57:47 -04:00
Andreas Hansson
d628344574 Device: Update stats for PIO and PCI latency change
This patch merely updates the regression stats to reflect the change
in PIO and PCI latency.
2012-09-10 11:57:37 -04:00
Joel Hestness
4124ea09f8 stats: Update Ruby regressions for memory controller fix 2012-09-05 20:53:34 -05:00
Andreas Hansson
fb5dd28420 Checker: Bump the realview-o3-checker regression
This patch bumps the stats for the realview-o3-checker after fixing
the checker CPU in the previous patch.
2012-08-28 14:30:25 -04:00
Nilay Vaish
1032bc72ed Regression: updates ruby.stats due to change in virtual network 2012-08-25 15:49:07 -05:00
Andreas Hansson
a6074016e2 Bridge: Remove NACKs in the bridge and unify with packet queue
This patch removes the NACKing in the bridge, as the split
request/response busses now ensure that protocol deadlocks do not
occur, i.e. the message-dependency chain is broken by always allowing
responses to make progress without being stalled by requests. The
NACKs had limited support in the system with most components ignoring
their use (with a suitable call to panic), and as the NACKs are no
longer needed to avoid protocol deadlocks, the cleanest way is to
simply remove them.

The bridge is the starting point as this is the only place where the
NACKs are created. A follow-up patch will remove the code that deals
with NACKs in the endpoints, e.g. the X86 table walker and DMA
port. Ultimately the type of packet can be complete removed (until
someone sees a need for modelling more complex protocols, which can
now be done in parts of the system since the port and interface is
split).

As a consequence of the NACK removal, the bridge now has to send a
retry to a master if the request or response queue was full on the
first attempt. This change also makes the bridge ports very similar to
QueuedPorts, and a later patch will change the bridge to use these. A
first step in this direction is taken by aligning the name of the
member functions, as done by this patch.

A bit of tidying up has also been done as part of the simplifications.

Surprisingly, this patch has no impact on any of the
regressions. Hence, there was never any NACKs issued. In a follow-up
patch I would suggest changing the size of the bridge buffers set in
FSConfig.py to also test the situation where the bridge fills up.
2012-08-22 11:39:58 -04:00
Ali Saidi
73e9e923d0 stats: Update stats for syscall emulation Linux kernel changes. 2012-08-15 10:38:05 -04:00
Ali Saidi
6a70ef30a3 stats: revert pc-simple-timing-ruby-MESI_CMP_directory to before last update 2012-07-30 12:11:25 -04:00