Commit graph

800 commits

Author SHA1 Message Date
Andreas Hansson
2208ea049f MEM: Make the bus bridge unidirectional and fixed address range
This patch makes the bus bridge uni-directional and specialises the
bus ports to be a master port and a slave port. This greatly
simplifies the assumptions on both sides as either port only has to
deal with requests or responses. The following patches introduce the
notion of master and slave ports, and would not be possible without
this split of responsibilities.

In making the bridge unidirectional, the address range mechanism of
the bridge is also changed. For the cases where communication is
taking place both ways, an additional bridge is needed. This causes
issues with the existing mechanism, as the busses cannot determine
when to stop iterating the address updates from the two bridges. To
avoid this issue, and also greatly simplify the specification, the
bridge now has a fixed set of address ranges, specified at creation
time.
2012-01-17 12:55:09 -06:00
Andreas Hansson
f85286b3de MEM: Add port proxies instead of non-structural ports
Port proxies are used to replace non-structural ports, and thus enable
all ports in the system to correspond to a structural entity. This has
the advantage of accessing memory through the normal memory subsystem
and thus allowing any constellation of distributed memories, address
maps, etc. Most accesses are done through the "system port" that is
used for loading binaries, debugging etc. For the entities that belong
to the CPU, e.g. threads and thread contexts, they wrap the CPU data
port in a port proxy.

The following replacements are made:
FunctionalPort      > PortProxy
TranslatingPort     > SETranslatingPortProxy
VirtualPort         > FSTranslatingPortProxy

--HG--
rename : src/mem/vport.cc => src/mem/fs_translating_port_proxy.cc
rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh
rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc
rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-17 12:55:08 -06:00
Nilay Vaish
c57dc3ffcb Ruby: Use map option for selecting b/w sparse and memory vector 2012-01-11 13:53:38 -06:00
Nilay Vaish
03229f2575 Config: Add support for restoring using a timing CPU
Currently there is an assumption that restoration from a checkpoint will
happen by first restoring to an atomic CPU and then switching to a timing
CPU. This patch adds support for directly restoring to a timing CPU. It
adds a new option '--restore-with-cpu' which is used to specify the type
of CPU to which the checkpoint should be restored to. It defaults to
'atomic' which was the case before.
2012-01-11 13:50:18 -06:00
Nilay Vaish
bd739a75b9 Ruby: remove the files related to the tracer
The Ruby Tracer is out of date with the changes that are being carried
out to support checkpointing. Hence, it needs to be removed.
2012-01-10 18:35:45 -06:00
Nilay Vaish
e4b447754e Config: Remove short option string for cpu type 2012-01-10 06:35:40 -06:00
Ali Saidi
bcb71963eb ARM: Add support for running multiple systems 2012-01-09 18:08:20 -06:00
Ali Saidi
80a6907927 ARM: Add support for initparam m5 op 2012-01-09 18:08:20 -06:00
Ali Saidi
6a6d888ab4 cpu2000: Add missing art benchmark to all 2012-01-09 18:08:20 -06:00
Nilay Vaish
10c2e8ae9a Ruby Cache: Add param for marking caches as instruction only 2012-01-07 07:38:53 -06:00
Nilay Vaish
a88ec980a4 Config: Add an option of type 'choice' for cpu type
This patch adds a new option for cpu type. This option is of type 'choice'
which is similar to a C++ enum, except that it takes string values as
possible choices. Following options are being removed -- detailed, timing,
inorder.

--HG--
extra : rebase_source : 58885e2e8a88b6af8e6ff884a5922059dbb1a6cb
2012-01-05 11:04:25 -06:00
Anthony Gutierrez
19e65a6502 ARM: Update config files for Android/BBench images available on website.
--HG--
extra : rebase_source : ca98021c3f96422374fbd4500da312a5a9dd00df
2011-12-15 00:43:35 -05:00
gloh
aab7397324 config: command line option to specify ruby output file
--HG--
extra : rebase_source : df2237b2ce01b1a3e1d6f112a62deadde4d92420
2011-12-01 10:08:52 -08:00
Chris Emmons
9aea847f58 VNC: Add support for capturing frame buffer to file each time it is changed.
When a change in the frame buffer from the VNC server is detected, the new
frame is stored out to the m5out/frames_*/ directory.  Specifiy the flag
"--frame-capture" when running configs/example/fs.py to enable this behavior.

--HG--
extra : rebase_source : d4e08e83f4fa6ff79f3dc9c433fc1f0487e057fc
2011-12-01 00:15:26 -08:00
Chander Sudanthi
61c14da751 O3: Remove hardcoded tgts_per_mshr in O3CPU.py.
There are two lines in O3CPU.py that set the dcache and icache
tgts_per_mshr to 20, ignoring any pre-configured value of tgts_per_mshr.
This patch removes these hardcoded lines from O3CPU.py and sets the default
L1 cache mshr targets to 20.

--HG--
extra : rebase_source : 6f92d950e90496a3102967442814e97dc84db08b
2011-12-01 00:15:22 -08:00
Tushar Krishna
ac993964a9 GARNET: adding a fault model for resilient on-chip network research.
This patch adds a fault model, which provides the probability of a number of
architectural faults in the interconnection network (e.g., data corruption,
misrouting). These probabilities can be used to realistically inject faults
in GARNET and faithfully evaluate the effectiveness of novel resilient NoC
architectures.
2011-11-04 18:40:22 -04:00
Nilay Vaish
9344480480 Ruby FS: Add the options for kernel and simulation script
These options were missing from the script ruby_fs.py. This patch adds these
options to the script.
2011-10-29 16:54:57 -05:00
Ali Saidi
f2bfef90c4 ARM: Fix small bug in config script that prevents android from booting 2011-10-19 18:08:31 -05:00
Ali Saidi
ba265abbfd ARM: Add some MP regressions and clean up the disk images and kernels a bit 2011-08-19 15:08:09 -05:00
Ali Saidi
2fd2b44b86 ARM: Add VExpress_E support with PCIe to gem5 2011-08-19 15:08:08 -05:00
Ali Saidi
d2a0a2ec22 ARM: Add support for Versatile Express boards 2011-08-19 15:08:08 -05:00
Nilay Vaish
1b49c56679 Scons: Drop RUBY as compile time option.
This patch drops RUBY as a compile time option. Instead the PROTOCOL option
is used to figure out whether or not to build Ruby. If the specified protocol
is 'None', then Ruby is not compiled.
2011-08-02 00:10:08 -05:00
Nilay Vaish
00ad4eb8ce Ruby: Fix instantiations of DMA controller and sequencer
The patch on Ruby functional accesses made changes to the process of
instantiating controllers and sequencers. The DMA controller and
sequencer was not updated, hence this patch.
2011-07-26 12:20:22 -05:00
Nilay Vaish
ca247a81f0 Ruby: Fix dma controller configs/ruby/MI_example.py
The dma controller in configs/ruby/MI_example.py was not being set correctly.
This patch fixes it.
2011-07-25 18:18:31 -05:00
Nilay Vaish
d919930c3c se.py: Fixes the way ruby's options are added 2011-07-11 19:57:10 -05:00
Nilay Vaish
5e0851d554 Network_test: Conform it with functional access changes in Ruby
Addition of functional access support to Ruby necessitated some changes to
the way coherence protocols are written. I had forgotten to update the
Network_test protocol. This patch makes those updates.
2011-07-03 11:33:46 -05:00
Brad Beckmann
0b7b3766af config: removed unnecessary slashes
This patch removes unnecessary slashes from a couple of python scripts.
2011-06-30 19:54:02 -05:00
Brad Beckmann ext:(%2C%20Nilay%20Vaish%20%3Cnilay%40cs.wisc.edu%3E)
c86f849d5a Ruby: Add support for functional accesses
This patch rpovides functional access support in Ruby. Currently only
the M5Port of RubyPort supports functional accesses. The support for
functional through the PioPort will be added as a separate patch.
2011-06-30 19:49:26 -05:00
Gedare Bloom
3f1f16703d ARM: Add m5ops and related support for workbegin() and workend() to ARM ISA. 2011-06-17 12:20:10 -05:00
Steve Reinhardt
19bb896bfe config: revamp x86 config to avoid appending to SimObjectVectors
A significant contributor to the need for adoptOrphanParams()
is the practice of appending to SimObjectVectors which have
already been assigned as children.  This practice sidesteps the
assignment operation for those appended SimObjects, which is
where parent/child relationships are typically established.

This patch reworks the config scripts that use append() on
SimObjectVectors, which all happen to be in the x86 system
configuration.  At some point in the future, I hope to make
SimObjectVectors immutable (by deriving from tuple rather than
list), at which time this patch will be necessary for correct
operation.  For now, it just avoids some of the warning
messages that get printed in adoptOrphanParams().
2011-05-23 14:29:23 -07:00
Steve Reinhardt
8a652f9871 config: tweak ruby configs to clean up hierarchy
Re-enabling implicit parenting (see previous patch) causes current
Ruby config scripts to create some strange hierarchies and generate
several warnings.  This patch makes three general changes to address
these issues.

1. The order of object creation in the ruby config files makes the L1
   caches children of the sequencer rather than the controller; these
   config ciles are rewritten to assign the L1 caches to the
   controller first.

2. The assignment of the sequencer list to system.ruby.cpu_ruby_ports
   causes the sequencers to be children of system.ruby, generating
   warnings because they are already parented to their respective
   controllers.  Changing this attribute to _cpu_ruby_ports fixes this
   because the leading underscore means this is now treated as a plain
   Python attribute rather than a child assignment. As a result, the
   configuration hierarchy changes such that, e.g.,
   system.ruby.cpu_ruby_ports0 becomes system.l1_cntrl0.sequencer.

3. In the topology classes, the routers become children of some random
   internal link node rather than direct children of the topology.
   The topology classes are rewritten to assign the routers to the
   topology object first.
2011-05-23 14:29:23 -07:00
Korey Sewell
b3ff137c8e configs: missed spot progress-interval change 2011-05-23 14:36:22 -04:00
Tushar Krishna
de97d75965 configs: remove -p from ruby_network_test.py
A recent patch broke the ruby network tester by adding -p inside Options.py
which conflicts with the -p inside ruby_network_test.py.
Have removed -p from ruby_network_test.py
2011-05-21 00:00:54 -04:00
Korey Sewell
9f1b60e05c configs: cleanup redundant/unused options
maxinsts & max_inst redundant
prog_intvl and profile seem redundant, but profile looks to be unused
add -p option for progress intervals
2011-05-20 14:49:06 -04:00
Tushar Krishna
1267ff5949 NetworkTest: added sim_cycles parameter to the network tester.
The network tester terminates after injecting for sim_cycles
(default=1000), instead of having to explicitly pass --maxticks from the
command line as before. If fixed_pkts is enabled, the tester only
injects maxpackets number of packets, else it keeps injecting till sim_cycles.
The tester also works with zero command line arguments now.
2011-05-07 17:43:30 -04:00
Ali Saidi
cefd6960e5 ARM: Configure bootloader parameters 2011-05-04 20:38:28 -05:00
Brad Beckmann
8733ed4b7d network: basic link bw for garnet and simple networks
This patch ensures that both Garnet and the simple networks use the bw value
specified in the topology.  To do so, the patch generalizes the specification
of bw for basic links.  This value is then translated to the specific value
used by the simple and Garnet networks.  Since Garent does not support
non-uniformed link bandwidth, the patch also adds a check to ensure all bws are
equal.

--HG--
rename : src/mem/ruby/network/BasicLink.cc => src/mem/ruby/network/simple/SimpleLink.cc
rename : src/mem/ruby/network/BasicLink.hh => src/mem/ruby/network/simple/SimpleLink.hh
rename : src/mem/ruby/network/BasicLink.py => src/mem/ruby/network/simple/SimpleLink.py
2011-04-28 17:18:14 -07:00
Brad Beckmann
40bcbf4253 network: convert links & switches to first class C++ SimObjects
This patch converts links and switches from second class simobjects that were
virtually ignored by the networks (both simple and Garnet) to first class
simobjects that directly correspond to c++ ojbects manipulated by the
topology and network classes.  This is especially true for Garnet, where the
links and switches directly correspond to specific C++ objects.

By making this change, many aspects of the Topology class were simplified.

--HG--
rename : src/mem/ruby/network/Network.cc => src/mem/ruby/network/BasicLink.cc
rename : src/mem/ruby/network/Network.hh => src/mem/ruby/network/BasicLink.hh
rename : src/mem/ruby/network/Network.cc => src/mem/ruby/network/garnet/fixed-pipeline/GarnetLink_d.cc
rename : src/mem/ruby/network/Network.hh => src/mem/ruby/network/garnet/fixed-pipeline/GarnetLink_d.hh
rename : src/mem/ruby/network/garnet/fixed-pipeline/GarnetNetwork_d.py => src/mem/ruby/network/garnet/fixed-pipeline/GarnetLink_d.py
rename : src/mem/ruby/network/garnet/fixed-pipeline/GarnetNetwork_d.py => src/mem/ruby/network/garnet/fixed-pipeline/GarnetRouter_d.py
rename : src/mem/ruby/network/Network.cc => src/mem/ruby/network/garnet/flexible-pipeline/GarnetLink.cc
rename : src/mem/ruby/network/Network.hh => src/mem/ruby/network/garnet/flexible-pipeline/GarnetLink.hh
rename : src/mem/ruby/network/garnet/fixed-pipeline/GarnetNetwork_d.py => src/mem/ruby/network/garnet/flexible-pipeline/GarnetLink.py
rename : src/mem/ruby/network/garnet/fixed-pipeline/GarnetNetwork_d.py => src/mem/ruby/network/garnet/flexible-pipeline/GarnetRouter.py
2011-04-28 17:18:14 -07:00
Nathan Binkert
09064ea552 python: fix another bug from changes to main.py 2011-04-20 19:07:44 -07:00
Ali Saidi
d6289507d8 ARM: Include IDE/CF controller by default in PBX model.
Frame buffer and boot linux:
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxFrameBuf --kernel=vmlinux.touchkit
Linux from a CF card:
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxCflash --kernel=vmlinux.touchkit
Run Android
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmAndroid --kernel=vmlinux.android
Run MP
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxCflash --kernel=vmlinux.mp-2.6.38
2011-04-04 11:42:31 -05:00
Anthony Gutierrez
332adcdd1a Sim: Fix Simulation.py to allow more than 1 core for standard switching.
This patch moves the assignment of testsys.switch_cpus, testsys.switch_cpus_1,
switch_cpu_list, and switch_cpu_list1 outside of the for loop so they are
assigned only once, after switch_cpus and switch_cpus_1 are constructed.
2011-04-04 11:42:31 -05:00
Somayeh Sardashti
c8bbfed937 This patch supports cache flushing in MOESI_hammer 2011-03-28 10:49:45 -05:00
Nilay Vaish
ef987a4064 Config: Import math in MI_example.py 2011-03-28 10:49:36 -05:00
Brad Beckmann
48b58b3332 ruby: fixed cache index setting 2011-03-25 10:13:50 -07:00
Tushar Krishna
09c3a97a4c This patch adds the network tester for simple and garnet networks.
The tester code is in testers/networktest.
The tester can be invoked by configs/example/ruby_network_test.py.
A dummy coherence protocol called Network_test is also addded for network-only simulations and testing. The protocol takes in messages from the tester and just pushes them into the network in the appropriate vnet, without storing any state.
2011-03-21 22:51:58 -04:00
Lisa Hsu
8957b09da1 configs: combine ruby_se.py and se.py to avoid all that code duplication 2011-03-19 21:13:04 -07:00
Lisa Hsu
0e75e3fd5f enable x86 workloads on se.py 2011-03-19 21:13:02 -07:00
Lisa Hsu
5103c6fe88 se.py: Modify script to make multiprogramming much easier.
Now, instead of --bench benchname, you can do --bench bench1-bench2-bench3 and it will
set up a simulation that instantiates those three workloads.  Only caveat is that now,
for sanity checking, your -n X must match the number of benches in the list.
2011-03-19 21:12:59 -07:00
Ali Saidi
887e9e2b99 ARM: Bare metal system should have 256MB of RAM. 2011-03-17 19:20:20 -05:00
Ali Saidi
a432d8e085 Mem: Fix issue with dirty block being lost when entire block transferred to non-cache.
This change fixes the problem for all the cases we actively use. If you want to try
more creative I/O device attachments (E.g. sharing an L2), this won't work. You
would need another level of caching between the I/O device and the cache
(which you actually need anyway with our current code to make sure writes
propagate). This is required so that you can mark the cache in between as
top level and it won't try to send ownership of a block to the I/O device.
Asserts have been added that should catch any issues.
2011-03-17 19:20:19 -05:00
Gabe Black
aa0cd52504 Configs: Explicitly import env in Benchmarks.py
env was being implicitly imported into Benchmarks.py through SysPaths.py.
This change brings it in explicitly in the file where it's used.
2011-02-24 02:14:45 -08:00
Ali Saidi
79dac89552 ARM: Clarifies creation of Linux and baremetal ARM systems.
makeArmSystem creates both bare-metal and Linux systems more cleanly.
machine_type was never optional though listed as an optional argument; a system
such as "RealView_PBX" must now be explicitly specified.  Now that it is a
required argument, the placement of the arguments has changed slightly
requiring some changes to calls that create ARM systems.
2011-02-23 15:10:48 -06:00
Korey Sewell
981e1dd7ee configs: cache: add cache line size option 2011-02-23 14:26:55 -05:00
Korey Sewell
fb92578415 configs: set default cache params
It's confusing (especially to new users), when you are setting some standard
parameters (as defined in Options.py) and they aren't reflected in the simulations
so we might as well link the settings in CacheConfig.py to those in Options.py
2011-02-23 01:01:46 -05:00
Ali Saidi
d33c1d9592 VNC: Add VNC server to M5 2011-02-11 18:29:35 -06:00
Brad Beckmann
ea9d4c3a97 memtest: due to contention increase, increased deadlock threshold 2011-02-08 15:53:33 -08:00
Brad Beckmann
6ebd7c390b config: fixed minor bug connecting dma devices to ruby 2011-02-08 15:52:44 -08:00
Gabe Black
f8fc0419c5 X86, Config: Move the setting of work count options to a separate function.
This way things that don't care about work count options and/or aren't called
by something that has those command line options set up doesn't have to build
a fake object to carry in inert values.
2011-02-07 01:22:15 -08:00
Brad Beckmann
3a388aff69 boot: script that creates a checkpoint after Linux boot up 2011-02-06 22:14:19 -08:00
Brad Beckmann
7edab47448 ruby: numa bit fix for sparse memory 2011-02-06 22:14:19 -08:00
Brad Beckmann
dfa8cbeb06 m5: added work completed monitoring support 2011-02-06 22:14:19 -08:00
Brad Beckmann
17b4ef52bb ruby: x86 fs config support 2011-02-06 22:14:18 -08:00
Brad Beckmann
1b54344aeb MOESI_hammer: Added full-bit directory support 2011-02-06 22:14:18 -08:00
Gabe Black
fd26707731 Mem,X86: Make the IO bridge pass APIC messages back towards the CPU. 2011-02-03 20:56:27 -08:00
Gabe Black
00f24ae92c Config: Keep track of uncached and cached ports separately.
This makes sure that the address ranges requested for caches and uncached ports
don't conflict with each other, and that accesses which are always uncached
(message signaled interrupts for instance) don't waste time passing through
caches.
2011-02-03 20:23:00 -08:00
Gabe Black
c4b81d311e X86: Change how the default disk image gets set up.
The disk image to use was always being forced to a particular value. This
change changes what disk image is selected as the default based on the
architecture being built. In the future, a more sophisticated system might be
used that selected a path based on certain rules instead of relying on one off
file names.
2011-02-02 18:03:58 -08:00
Gabe Black
119f5f8e94 X86: Add L1 caches for the TLB walkers.
Small L1 caches are connected to the TLB walkers when caches are used. This
allows them to participate in the coherence protocol properly.
2011-02-01 18:28:41 -08:00
Gabe Black
a368fba7d4 Time: Add a mechanism to prevent M5 from running faster than real time.
M5 skips over any simulated time where it doesn't have any work to do. When
the simulation is active, the time skipped is short and the work done at any
point in time is relatively substantial. If the time between events is long
and/or the work to do at each event is small, it's possible for simulated time
to pass faster than real time. When running a benchmark that can be good
because it means the simulation will finish sooner in real time. When
interacting with the real world through, for instance, a serial terminal or
bridge to a real network, this can be a problem. Human or network response time
could be greatly exagerated from the perspective of the simulation and make
simulated events happen "too soon" from an external perspective.

This change adds the capability to force the simulation to run no faster than
real time. It does so by scheduling a periodic event that checks to see if
its simulated period is shorter than its real period. If it is, it stalls the
simulation until they're equal. This is called time syncing.

A future change could add pseudo instructions which turn time syncing on and
off from within the simulation. That would allow time syncing to be used for
the interactive parts of a session but then turned off when running a
benchmark using the m5 utility program inside a script. Time syncing would
probably not happen anyway while running a benchmark because there would be
plenty of work for M5 to do, but the event overhead could be avoided.
2011-01-19 11:48:00 -08:00
Nathan Binkert
bd18ac8287 ruby: get rid of ruby's Debug.hh
Get rid of the Debug class
Get rid of ASSERT and use assert
Use DPRINTFR for ProtocolTrace
2011-01-10 11:11:20 -08:00
Nilay Vaish
5e25f31712 Ruby: Add option for random seed to Ruby.py
This patch adds an option to the script Ruby.py for setting the parameter
m_random_seed used for randomizing delays in the memory system. The option
can be specified as "--random_seed <seed value>".
2011-01-03 12:40:31 -06:00
Ali Saidi
18555c1b56 Configs: Automatically choose the correct hello world binary. 2010-12-07 16:19:57 -08:00
Gabe Black
4876e0c92b Config: Change misleading "cycle" message to say "tick".
Most of the messages in the config scripts that report a time value already
print "@ tick" followed by the current tick value, but a few were printing
"@ cycle". Since this is a distinction that's frequently confusing to new
users, this changes those message to the more accurate and consistent "@ tick".
2010-11-17 23:16:19 -05:00
Ali Saidi
d7b8efa0df ARM: Add support for a dumb IDE controller 2010-11-15 14:04:03 -06:00
Ali Saidi
c779af4e12 Mem: Finish half-baked support for mmaping file in physmem.
Physmem has a parameter to be able to mem map a file, however
it isn't actually used. This changeset utilizes the parameter
so a file can be mmapped.
2010-11-08 13:58:24 -06:00
Gabe Black
df3fd79d1f Configs: Stop setting the "mem" parameter in splash2 config files.
This parameter is no longer used, and trying to set it like these scripts were
gives a simobject two parents and causes the simulation to die.
2010-10-22 20:59:22 -07:00
Brad Beckmann
8f1f83d13d config: fixed numa high bit setting bug 2010-08-30 15:26:51 -07:00
Brad Beckmann
08b360e0e0 config: minor fix to probe filter index setting 2010-08-30 12:07:21 -07:00
Nathan Binkert
6d207bf40d ruby: None, not none 2010-08-29 07:02:42 -07:00
Steve Reinhardt
6d9fc4175e memtest: scale associativity and mshrs according to config
Use the actual fanouts in the tree specification to scale
cache associativity and mshrs instead of dumb constants.
2010-08-25 21:55:42 -07:00
Brad Beckmann
d4318457d1 config: changed ruby config file names to be consistent 2010-08-24 14:08:23 -07:00
Brad Beckmann
0e610290d0 config: remove ruby's requirement on the timing cmd line param
Since ruby only works in timing mode, explicitly requiring the timing cmd line
param to be specified is not necessary.
2010-08-24 13:20:32 -07:00
Brad Beckmann
8572d8fd91 config: fixed ruby dma device connections 2010-08-24 13:20:31 -07:00
Brad Beckmann
e983ef9e8c testers: move testers to a new directory
This patch moves the testers to a new subdirectory under src/cpu and includes
the necessary fixes to work with latest m5 initialization patches.

--HG--
rename : configs/example/determ_test.py => configs/example/ruby_direct_test.py
rename : src/cpu/directedtest/DirectedGenerator.cc => src/cpu/testers/directedtest/DirectedGenerator.cc
rename : src/cpu/directedtest/DirectedGenerator.hh => src/cpu/testers/directedtest/DirectedGenerator.hh
rename : src/cpu/directedtest/InvalidateGenerator.cc => src/cpu/testers/directedtest/InvalidateGenerator.cc
rename : src/cpu/directedtest/InvalidateGenerator.hh => src/cpu/testers/directedtest/InvalidateGenerator.hh
rename : src/cpu/directedtest/RubyDirectedTester.cc => src/cpu/testers/directedtest/RubyDirectedTester.cc
rename : src/cpu/directedtest/RubyDirectedTester.hh => src/cpu/testers/directedtest/RubyDirectedTester.hh
rename : src/cpu/directedtest/RubyDirectedTester.py => src/cpu/testers/directedtest/RubyDirectedTester.py
rename : src/cpu/directedtest/SConscript => src/cpu/testers/directedtest/SConscript
rename : src/cpu/directedtest/SeriesRequestGenerator.cc => src/cpu/testers/directedtest/SeriesRequestGenerator.cc
rename : src/cpu/directedtest/SeriesRequestGenerator.hh => src/cpu/testers/directedtest/SeriesRequestGenerator.hh
rename : src/cpu/memtest/MemTest.py => src/cpu/testers/memtest/MemTest.py
rename : src/cpu/memtest/SConscript => src/cpu/testers/memtest/SConscript
rename : src/cpu/memtest/memtest.cc => src/cpu/testers/memtest/memtest.cc
rename : src/cpu/memtest/memtest.hh => src/cpu/testers/memtest/memtest.hh
rename : src/cpu/rubytest/Check.cc => src/cpu/testers/rubytest/Check.cc
rename : src/cpu/rubytest/Check.hh => src/cpu/testers/rubytest/Check.hh
rename : src/cpu/rubytest/CheckTable.cc => src/cpu/testers/rubytest/CheckTable.cc
rename : src/cpu/rubytest/CheckTable.hh => src/cpu/testers/rubytest/CheckTable.hh
rename : src/cpu/rubytest/RubyTester.cc => src/cpu/testers/rubytest/RubyTester.cc
rename : src/cpu/rubytest/RubyTester.hh => src/cpu/testers/rubytest/RubyTester.hh
rename : src/cpu/rubytest/RubyTester.py => src/cpu/testers/rubytest/RubyTester.py
rename : src/cpu/rubytest/SConscript => src/cpu/testers/rubytest/SConscript
2010-08-24 12:07:22 -07:00
Ali Saidi
330fada1aa ARM: Add configuration for Linux/Full System 2010-08-23 11:18:40 -05:00
Brad Beckmann
af6b97e3ee ruby: Recycle latency fix for hammer
Patch allows each individual message buffer to have different recycle latencies
and allows the overall recycle latency to be specified at the cmd line. The
patch also adds profiling info to make sure no one processor's requests are
recycled too much.
2010-08-20 11:46:14 -07:00
Brad Beckmann
8b28848321 ruby: added probe filter support to hammer 2010-08-20 11:46:14 -07:00
Brad Beckmann
593ae7457e ruby: fixed DirectoryMemory's numa_high_bit configuration
This fix includes the off-by-one bit selection bug for numa mapping.
2010-08-20 11:46:13 -07:00
Brad Beckmann
72044e3f5a ruby: Disable migratory sharing for token and hammer
This patch allows one to disable migratory sharing for those cache blocks that
are accessed by atomic requests.  While the implementations are different
between the token and hammer protocols, the motivation is the same.  For
Alpha, LLSC semantics expect that normal loads do not unlock cache blocks that
have been locked by LL accesses.  Therefore, locked blocks should not transfer
write permissions when responding to these load requests.  Instead, only they
only transfer read permissions so that the subsequent SC access can possibly
succeed.
2010-08-20 11:46:13 -07:00
Brad Beckmann
9b130c153b ruby: Improved try except blocks in ruby creation
Replaced the sys.exit in the try-except blocks with raise so that the python
call stack will be printed
2010-08-20 11:46:13 -07:00
Brad Beckmann
a2dcbde165 config: added cmd options to control ruby debug 2010-08-20 11:46:13 -07:00
Brad Beckmann
6a4f99899b ruby: Resurrected Ruby's deterministic tests
Added the request series and invalidate deterministic tests as new cpu models
and removed the no longer needed ruby tests

--HG--
rename : configs/example/rubytest.py => configs/example/determ_test.py
rename : src/mem/ruby/tester/DetermGETXGenerator.cc => src/cpu/directedtest/DirectedGenerator.cc
rename : src/mem/ruby/tester/DetermGETXGenerator.hh => src/cpu/directedtest/DirectedGenerator.hh
rename : src/mem/ruby/tester/DetermGETXGenerator.cc => src/cpu/directedtest/InvalidateGenerator.cc
rename : src/mem/ruby/tester/DetermGETXGenerator.hh => src/cpu/directedtest/InvalidateGenerator.hh
rename : src/cpu/rubytest/RubyTester.cc => src/cpu/directedtest/RubyDirectedTester.cc
rename : src/cpu/rubytest/RubyTester.hh => src/cpu/directedtest/RubyDirectedTester.hh
rename : src/mem/ruby/tester/DetermGETXGenerator.cc => src/cpu/directedtest/SeriesRequestGenerator.cc
rename : src/mem/ruby/tester/DetermGETXGenerator.hh => src/cpu/directedtest/SeriesRequestGenerator.hh
2010-08-20 11:46:13 -07:00
Brad Beckmann
29c45ccd23 ruby: Reduced ruby latencies
The previous slower ruby latencies created a mismatch between the faster M5
cpu models and the much slower ruby memory system.  Specifically smp
interrupts were much slower and infrequent, as well as cpus moving in and out
of spin locks.  The result was many cpus were idle for large periods of time.

These changes fix the latency mismatch.
2010-08-20 11:46:12 -07:00
Brad Beckmann
808701a10c memtest: Memtester support for DMA
This patch adds DMA testing to the Memtester and is inherits many changes from
Polina's old tester_dma_extension patch.  Since Ruby does not work in atomic
mode, the atomic mode options are removed.
2010-08-20 11:46:12 -07:00
Brad Beckmann
10e25cb1d0 config: Improve ruby simobject names
This patch attaches ruby objects to the system before the topology is
created so that their simobject names read their meaningful variable
names instead of their topology name.
2010-08-20 11:46:11 -07:00
Brad Beckmann
c7bd896448 ruby: added token broadcast config params to cmd options 2010-08-20 11:46:11 -07:00
Brad Beckmann
5c801090a3 config: reorganized how ruby specifies command-line options 2010-08-20 11:44:09 -07:00
Brad Beckmann
7816d0d12b config: moved python protocol config files
Moved the python protocol config files back to their original location to avoid
addToPath calls.

--HG--
rename : configs/ruby/protocols/MESI_CMP_directory.py => configs/ruby/MESI_CMP_directory.py
rename : configs/ruby/protocols/MI_example.py => configs/ruby/MI_example.py
rename : configs/ruby/protocols/MOESI_CMP_directory.py => configs/ruby/MOESI_CMP_directory.py
rename : configs/ruby/protocols/MOESI_CMP_token.py => configs/ruby/MOESI_CMP_token.py
rename : configs/ruby/protocols/MOESI_hammer.py => configs/ruby/MOESI_hammer.py
2010-08-20 11:41:35 -07:00
Steve Reinhardt
e0754c0f6c misc: add some AMD copyright notices
Meant to add these with the previous batch of csets.
2010-08-17 05:49:05 -07:00
Steve Reinhardt
2519d116c9 sim: fold checkpoint restore code into instantiate()
The separate restoreCheckpoint() call is gone; just pass
the checkpoint dir as an optional arg to instantiate().
This change is a precursor to some more extensive
reworking of the startup code.
2010-08-17 05:17:06 -07:00
Steve Reinhardt
cfaddd5fd3 configs: clean up checkpoint code in Simulation.py
Small change to clean up some redundant code.
Should not have any functional impact.
2010-08-17 05:17:06 -07:00
Steve Reinhardt
1fbe466345 sim: make Python Root object a singleton
Enforce that the Python Root SimObject is instantiated only
once.  The C++ Root object already panics if more than one is
created.  This change avoids the need to track what the root
object is, since it's available from Root.getInstance() (if it
exists).  It's now redundant to have the user pass the root
object to functions like instantiate(), checkpoint(), and
restoreCheckpoint(), so that arg is gone.  Users who use
configs/common/Simulate.py should not notice.
2010-08-17 05:06:22 -07:00
Nathan Binkert
2e9e75447a None, not none 2010-08-08 22:57:16 -07:00
Steve Reinhardt
cbd65e95db util: add a script for testing checkpointing
See comments in util/checkpoint-tester.py for details.
2010-07-05 21:39:38 -07:00
Ali Saidi
3dc6a8070e ARM: fix sizes of structs for ARM Linux 2010-06-02 12:58:17 -05:00
Nathan Binkert
90820ddf02 config: fix assertion for x86 in FSConfig.py 2010-04-18 21:33:59 -07:00
Brad Beckmann
898f1fc4a4 ruby: Reorganized Ruby topology and protocol files
--HG--
rename : configs/ruby/MESI_CMP_directory.py => configs/ruby/protocols/MESI_CMP_directory.py
rename : configs/ruby/MI_example.py => configs/ruby/protocols/MI_example.py
rename : configs/ruby/MOESI_CMP_directory.py => configs/ruby/protocols/MOESI_CMP_directory.py
rename : configs/ruby/MOESI_CMP_token.py => configs/ruby/protocols/MOESI_CMP_token.py
rename : configs/ruby/MOESI_hammer.py => configs/ruby/protocols/MOESI_hammer.py
rename : configs/ruby/networks/MeshDirCorners.py => src/mem/ruby/network/topologies/MeshDirCorners.py
2010-03-21 21:22:22 -07:00
Brad Beckmann
61e6b9e701 added sparse memory support to hammer 2010-03-21 21:22:21 -07:00
Brad Beckmann
4f044605e8 ruby: Adds configurable bit selection for numa mapping 2010-03-21 21:22:21 -07:00
Brad Beckmann
92cfd1cac7 ruby: Ruby support for sparse memory
The patch includes direct support for the MI example protocol.
2010-03-21 21:22:21 -07:00
Brad Beckmann
c67bddc84a ruby: removed ruby.config from configs/example 2010-03-21 21:22:20 -07:00
Brad Beckmann
91b0c5487b ruby: Python config files now sets a unique id for each sequencer 2010-03-21 21:22:20 -07:00
Brad Beckmann
d8e1e5abd0 ruby: fixed how ruby_fs creates phsyical memory
Now ruby_fs creates physical memory of the right size.
2010-03-21 21:22:20 -07:00
Brad Beckmann
1765badda2 ruby: Added a mesh network with directories at the corners
The patch creates a specific mesh network where directories are at the corners.
The patch is a good example of how to create an arbitrary network, similar to
the old file specified network, while leveraging scripts and loops when
possible.
2010-03-21 21:22:20 -07:00
Gabe Black
b1cbd7841a Config: Fix fs.py's call to CacheConfig.config_cache. 2010-02-27 18:52:57 -08:00
Lisa Hsu
a70f70ccbf configs: pull out cache configuration code from se.py and fs.py.
Most of these frontend configurations share cache configuration code, pull it out so that
changes to caches don't have to require changing multiple config files.
2010-02-25 10:13:40 -08:00
Lisa Hsu
1d3228481f cache: Make caches sharing aware and add occupancy stats.
On the config end, if a shared L2 is created for the system, it is
parameterized to have n sharers as defined by option.num_cpus. In addition to
making the cache sharing aware so that discriminating tag policies can make use
of context_ids to make decisions, I added an occupancy AverageStat and an occ %
stat to each cache so that you could know which contexts are occupying how much
cache on average, both in terms of blocks and percentage. Note that since
devices have context_id -1, having an array of occ stats that correspond to
each context_id will break here, so in FS mode I add an extra bucket for device
blocks. This bucket is explicitly not added in SE mode in order to not only
avoid ugliness in the stats.txt file, but to avoid broken stats (some formulas
break when a bucket is 0).
2010-02-23 09:34:22 -08:00
Brad Beckmann
057f5898ca ruby: ruby_se.py updated to new config system 2010-01-29 20:29:33 -08:00
Brad Beckmann
c441590b15 ruby: Removed if else statement in create_system
Based on Steve's suggestion, the ugly if-elif statement and multiple protocol
module import calls are removed and replaced with exec statements using the
protocol string.
2010-01-29 20:29:33 -08:00
Brad Beckmann
26cce73e97 ruby: memtest-ruby updated to the new config system 2010-01-29 20:29:33 -08:00
Brad Beckmann
8dd45674ae ruby: Converted Garnet to M5 configuration 2010-01-29 20:29:32 -08:00
Brad Beckmann
6c867f8263 ruby: Added a mesh topology 2010-01-29 20:29:27 -08:00
Brad Beckmann
faa76fc248 ruby: MESI_CMP_directory updated to the new config system 2010-01-29 20:29:27 -08:00
Brad Beckmann
31fcf09a68 ruby: MOESI_CMP_directory updated to the new config system 2010-01-29 20:29:26 -08:00
Brad Beckmann
d77a9df3c1 ruby: MOESI_CMP_token updates to use the new config system 2010-01-29 20:29:25 -08:00
Brad Beckmann
b3d195153e ruby: MI_example updates to use the new config system 2010-01-29 20:29:24 -08:00
Brad Beckmann
502b8bd8a4 ruby: Memory size consistency check
Ruby's memory is now sized according to the size of M5 physical memory.
2010-01-29 20:29:24 -08:00
Brad Beckmann
134cc3d48d ruby: convert to M5 MemorySize
Converted both ruby caches and directory memory to use the M5 MemorySize python
type.
2010-01-29 20:29:23 -08:00
Brad Beckmann
45230a4f6b ruby: added the GEMS ruby tester 2010-01-29 20:29:23 -08:00
Brad Beckmann
f88faa6c11 ruby: cleaned up ruby profilers
Cleaned up the ruby profilers by moving the memory controller profiling code
out of the main profiler object and into a separate object similar to the
current CacheProfiler.  Both the CacheProfiler and MemCntrlProfiler are
specific to a particular Ruby object, CacheMemory and MemoryControl
respectively.  Therefore, these profilers should not be SimObjects and
created by the python configuration system, but instead private objects.  This
simplifies the creation of these profilers.
2010-01-29 20:29:22 -08:00
Brad Beckmann
cfe41d0a1b ruby: Removed RubySystem::getNumberOfSequencers
removed the static function RubySystem::getNumberOfSequencers and replaced
it with a python config variable
2010-01-29 20:29:21 -08:00
Brad Beckmann
ce2d13195b ruby: FS support using the new configuration system 2010-01-29 20:29:21 -08:00
Brad Beckmann
dc758641c9 ruby: reorganized ruby python configuration
Reorganized ruby python configuration so that protocol and ruby memory system
configuration code can be shared by multiple front-end configuration files
(i.e. memory tester, full system, and hopefully the regression tester).  This
code works for memory tester, but have not tested fs mode.
2010-01-29 20:29:20 -08:00
Brad Beckmann
2c9ca672df ruby: Memory Controller Profiler with new config system
This patch includes a rather substantial change to the memory controller
profiler in order to work with the new configuration system.  Most
noteably, the mem_cntrl_profiler no longer uses a string map, but instead
a vector.  Eventually this support should be removed from the main
profiler and go into a separate object.  Each memory controller should have
a pointer to that new mem_cntrl profile object.
2010-01-29 20:29:20 -08:00
Brad Beckmann
2a0555470c ruby: Converted MOESI_hammer dma cntrl to new config system 2010-01-29 20:29:19 -08:00
Brad Beckmann
3b290a35ac ruby: Added the cache profiler to the new config system 2010-01-29 20:29:19 -08:00
Brad Beckmann
12daaed84a ruby: Added clock to ruby system
As a first step to migrate ruby to the M5 eventqueue, added a clock
variable to the ruby system.
2010-01-29 20:29:19 -08:00
Brad Beckmann
ed81489954 ruby: Ruby changes required to use the python config system
This patch includes the necessary changes to connect ruby objects using
the python configuration system.  Mainly it consists of removing
unnecessary ruby object pointers and connecting the necessary object
pointers using the generated param objects.  This patch includes the
slicc changes necessary to connect generated ruby objects together using
the python configuraiton system.
2010-01-29 20:29:19 -08:00
Brad Beckmann
42bebab779 ruby: connects sm queues to the network 2010-01-29 20:29:18 -08:00
Steve Reinhardt
a8ea70dac6 ruby: Calculate system total memory capacity in Python
rather than in RubySystem object.
2010-01-29 20:29:18 -08:00
Steve Reinhardt
0b54f1db8e ruby: Add support for generating topologies in Python. 2010-01-29 20:29:17 -08:00
Steve Reinhardt
98c94cfe3c ruby: Convert most Ruby objects to M5 SimObjects.
The necessary companion conversion of Ruby objects generated by SLICC
are converted to M5 SimObjects in the following patch, so this patch
alone does not compile.
Conversion of Garnet network models is also handled in a separate
patch; that code is temporarily disabled from compiling to allow
testing of interim code.
2010-01-29 20:29:17 -08:00
Gabe Black
93d89b288f X86: Record the memory mode when building an X86 system. 2009-12-19 01:49:34 -08:00
Brad Beckmann
c6182199c5 m5: improvements to the ruby_fs.py file 2009-11-18 16:34:32 -08:00
Brad Beckmann
70a261c0ae m5: Added option to take a checkpoint at the end of simulation 2009-11-18 13:55:58 -08:00
Brad Beckmann
b8c413e993 m5: Moved profile option since Simulation depends on it. 2009-11-18 13:55:58 -08:00
Brad Beckmann
90d6e2652f ruby: included ruby config parameter ports per core
Slightly improved the major hack need to correctly assign the number of ports
per core.  CPUs have two ports: icache + dcache.  MemTester has one port.
2009-11-18 13:55:58 -08:00
Brad Beckmann
3cf24f9716 ruby: Support for merging ALPHA_FS and ruby
Connects M5 cpu and dma ports directly to ruby sequencers and dma
sequencers.  Rubymem also includes a pio port so that pio requests
and be forwarded to a special pio bus connecting to device pio
ports.
2009-11-18 13:55:58 -08:00
Brad Beckmann
c3204421d8 ruby: Ruby memtest python script. 2009-11-18 13:55:57 -08:00
Brad Beckmann
912f3d7074 removed libruby file reference from ruby_se.py 2009-10-16 08:15:53 -07:00
Nathan Binkert
9a8cb7db7e python: Move more code into m5.util allow SCons to use that code.
Get rid of misc.py and just stick misc things in __init__.py
Move utility functions out of SCons files and into m5.util
Move utility type stuff from m5/__init__.py to m5/util/__init__.py
Remove buildEnv from m5 and allow access only from m5.defines
Rename AddToPath to addToPath while we're moving it to m5.util
Rename read_command to readCommand while we're moving it
Rename compare_versions to compareVersions while we're moving it.

--HG--
rename : src/python/m5/convert.py => src/python/m5/util/convert.py
rename : src/python/m5/smartdict.py => src/python/m5/util/smartdict.py
2009-09-22 15:24:16 -07:00
Korey Sewell
6499174115 inorder-configs: update se.py
fix bug with  'numThreads=len(workloads)' which was counting characters of command-line not counting threads as intended.
Update numThreads for inorder/o3 cases and default to 1 for all other cases.
2009-09-16 09:46:26 -04:00
Korey Sewell
7858a8e68f configs: add maxinsts option on command line
-option to allow threads to run to a max_inst_any_thread which is more useful/quicker in a lot of
cases then always having to figure out what tick to run your simulation to.
2009-09-16 09:45:30 -04:00
Steve Reinhardt
15bb248013 Add an I/O cache to FS config even if there's just an "L2" cache. 2009-09-14 21:19:40 -07:00
Korey Sewell
6c46313556 se-configs: edit se.py to account for non-O3CPU workloads 2009-07-26 00:13:35 -04:00
Korey Sewell
44f80e7ca5 o3-smt: enforce numThreads parameter for SMT SE mode 2009-07-25 00:50:27 -04:00
Daniel Sanchez
93f2f69657 ruby: Working M5 interface and updated Ruby interface.
This changeset also includes a lot of work from Derek Hower <drh5@cs.wisc.edu>

RubyMemory is now both a driver for Ruby and a port for M5.  Changed
makeRequest/hitCallback interface. Brought packets (superficially)
into the sequencer. Modified tester infrastructure to be packet based.
and Ruby can be used together through the example ruby_se.py
script. SPARC parallel applications work, and the timing *seems* right
from combined M5/Ruby debug traces. To run,
% build/ALPHA_SE/m5.debug configs/example/ruby_se.py -c
  tests/test-progs/hello/bin/alpha/linux/hello -n 4 -t
2009-05-11 10:38:46 -07:00
Korey Sewell
c70241810d cpus: fix cpu progress event
this was double scheduling itself (once in constructor and once in cpu code). also add support for stopping / starting
progress events through repeatEvent flag and also changing the interval of the progress event as well
2009-05-05 02:51:31 -04:00
Gabe Black
8d84f81e70 X86, Config: Make makeX86System consider the number of CPUs, and clean up interrupt assignment. 2009-04-26 02:04:32 -07:00
Steve Reinhardt
6629d9b2bc mem: use single BadAddr responder per system.
Previously there was one per bus, which caused some coherence problems
when more than one decided to respond.  Now there is just one on
the main memory bus.  The default bus responder on all other buses
is now the downstream cache's cpu_side port.  Caches no longer need
to do address range filtering; instead, we just have a simple flag
to prevent snoops from propagating to the I/O bus.
2008-07-16 11:10:33 -07:00
Steve Reinhardt
97b6947eb7 Minor tweaks for future Ruby compatibility. 2009-04-21 08:17:36 -07:00
Gabe Black
b8333a5155 X86: Actually put the PCI INTA entry into the MP tables. 2009-04-19 04:15:18 -07:00
Gabe Black
25e223c30f X86: Make E820 report nice, round (and correct) numbers. 2009-04-19 04:14:48 -07:00
Gabe Black
06d25dcd26 X86: Automatically make the IO APIC in an N CPU system have id N+1. 2009-04-19 02:39:19 -07:00
Steve Reinhardt
9b66e82897 configs: Allow M5_CPU2000 env var to set CPU2K binary path.
It would be nice to have a more comprehensive mechanism
but this is a big improvement over manually editing the script.
2009-04-15 12:52:31 -07:00
Gabe Black
eafdf00eb3 X86: Add IRQ4 to the Intel MP tables. 2009-02-25 10:19:06 -08:00
Korey Sewell
cf4a00ca41 Configs: Add support for the InOrder CPU model 2009-02-10 15:49:29 -08:00
Gabe Black
1c5b9773bd X86: Find the natural lpj for this configuration. 2009-02-01 00:29:07 -08:00
Gabe Black
a5ed1590bd X86: Add a root device to the kernel command line. 2009-02-01 00:27:49 -08:00
Gabe Black
70cd5bfce5 X86: Configure the first PCI interrupt. 2009-02-01 00:26:10 -08:00
Gabe Black
18f6c18323 X86: Hook in a hard drive image. 2009-02-01 00:24:26 -08:00
Gabe Black
01679bb416 X86: Take out the IDE noprobe kernel arguments. 2009-02-01 00:20:44 -08:00
Gabe Black
bb7ad80bbe X86: Plug in an IDE controller. 2009-02-01 00:00:03 -08:00
Gabe Black
d08b8e2b82 X86: Add some interrupt info to the intel MP tables. 2009-01-31 23:43:09 -08:00
Ali Saidi
f4291aac25 Errors: Print a URL with a hash of the format string to find more information about an error. 2009-01-30 20:04:15 -05:00
Gabe Black
7b7a92d3f4 X86: Prevent Linux for probing for non-existant IDE controllers. 2009-01-25 20:36:24 -08:00
Gabe Black
ff29e00112 X86: Add entries for the IO APIC to the MP table. 2008-10-11 16:12:34 -07:00
Gabe Black
526933e5d0 X86: Add an Intel MP table to the simulation. 2008-10-11 15:14:37 -07:00
Gabe Black
3af428606a X86: Rename the PC device to Pc.
--HG--
rename : src/dev/x86/PC.py => src/dev/x86/Pc.py
2008-10-11 02:23:40 -07:00
Gabe Black
ec0fb05d64 X86: Turn SMBios structures into simobjects. 2008-10-10 03:50:51 -07:00
Gabe Black
b4dab225fd X86: Split makeLinuxX86System into makeLinuxX86System and makeX86System. 2008-10-10 03:50:30 -07:00
Ali Saidi
3a3e356f4e style: Remove non-leading tabs everywhere they shouldn't be. Developers should configure their editors to not insert tabs 2008-09-10 14:26:15 -04:00
Michael Adler
5f42bfcd56 process: separate stderr from stdout
- Add the option of redirecting stderr to a file. With the old
behaviour, stderr would follow stdout if stdout was to a file, but
stderr went to the host stderr if stdout went to the host stdout.  The
new default maintains stdout and stderr going to the host.  Now the
two can specify different files, but they will share a file descriptor
if the name of the files is the same.
- Add --output and --errout options to se.py to go with --input.
2008-07-23 14:41:34 -07:00
Nathan Binkert
00df9016fe Rename SimConsole to Terminal since it makes more sense
--HG--
rename : src/dev/SimConsole.py => src/dev/Terminal.py
rename : src/dev/simconsole.cc => src/dev/terminal.cc
rename : src/dev/simconsole.hh => src/dev/terminal.hh
2008-06-17 20:29:06 -07:00
Ali Saidi
7e6728450f Scripts: Check for the appropriate build type as soon as possible. 2008-06-13 01:09:06 -04:00
Gabe Black
bceaa257a3 X86: Make the e820 table manually or automatically configurable from python. 2008-06-12 00:58:36 -04:00
Gabe Black
561a541797 X86: Force the kernel to use a certain loops per jiffy instead of calculating it. 2008-06-12 00:46:16 -04:00
Gabe Black
f6a97752b0 X86: Make the amount of system memory match the hardcoded e820 info. 2008-06-12 00:45:11 -04:00
Gabe Black
633c585bfa X86: Make the regular console use the serial port as well. 2008-06-12 00:45:01 -04:00
Gabe Black
b0c52885ce X86: Change the Opteron platform to be the PC platform.
--HG--
extra : convert_revision : 2c6ffebbad04a21cef6ba3fbc1803218908a6c37
2008-03-25 02:06:53 -04:00
Ali Saidi
969688154d Simpoints: Fix regression bug/Don't set process.simpoint, if simpoint doesn't exist
--HG--
extra : convert_revision : c156c49668815755c4c788f807e8eba32151aa24
2008-03-15 22:20:09 -04:00
Lisa Hsu
02a56d8d01 Error out if -s is used without --caches (instead of saying you must specify a
CPU).

--HG--
extra : convert_revision : a3b2bfbe7e037146ac08dd08834bf255da692506
2008-02-29 01:49:36 -05:00
Ali Saidi
0273533adb Configs: Make sure options don't conflict
--HG--
extra : convert_revision : dc9b91cf1d8e33c5e68d7faeb45dbe3e7038d14c
2008-02-29 01:23:18 -05:00
Ali Saidi
3cb7df428c Configs: Fix some bugs we introduced in the simpoints code
--HG--
extra : convert_revision : ef22c11cb3242903a484fc05dc0f96d3e5f9af72
2008-02-28 20:39:01 -05:00
Rick Strong
fcfc8b8c4f Configs: Make using Simpoints easier with some config files that support them easily
--HG--
extra : convert_revision : 0f21829306eb68b332f03da410e6c341c8595bdd
2008-02-27 00:35:09 -05:00
Gabe Black
7bde0285e5 X86: Get PCI config space to work, and adjust address space prefix numbering scheme.
--HG--
extra : convert_revision : 2b382f478ee8cde3a35aa4c105196f200bc7afa6
2008-02-26 23:38:01 -05:00
Vilas Sridharan
2e079ce038 add instruction count fast forwaing and max instruction options
--HG--
extra : convert_revision : 8fe45e512229cdc3e0dcd23e3e5c54516c445d0f
2008-02-22 17:48:10 -05:00
Ali Saidi
fc38e9c630 Configs: Change Simulation.py to return a subclass of the CPU models rather than the original class. Without this changes elsewhere in the config script (e.g. the DriveSys frequency can change the TestSys frequency.
--HG--
extra : convert_revision : f972207c616590a60a6e103daa5de469cf124b44
2008-02-14 16:13:50 -05:00
Gabe Black
657b52fea1 X86: Use the existing boot_osflags instead of duplicating it.
--HG--
extra : convert_revision : e04e438d7d261a61c52b946c23cd126ed648814a
2008-01-21 04:32:34 -05:00
Gabe Black
223e48e6ae X86: Make the IO ports work using extra physical address lines. Add a serial port.
--HG--
extra : convert_revision : a14cb4fc9afedfc0ff58b11a7f8fb5516d462cc6
2008-01-12 06:39:15 -05:00
Ali Saidi
45ea1549c9 Checkpointing: Fix a bug in the simulation script when restoring without standard switch and change some ifs to work with the default port since every port is now connected to something.
--HG--
extra : convert_revision : 72507cf13e58465291b0dce6322e853bee5a2b89
2007-12-18 01:52:57 -05:00
Gabe Black
42ae409746 X86: Move startup code to the system object to initialize a Linux system.
--HG--
extra : convert_revision : a4796c79f41aa8b8f38bf2f628bee8f1b3af64be
2007-12-01 23:09:56 -08:00
Korey Sewell
10e0ae5407 Accidently kept hardcoded memory value in merge. Remove that and now ALPHA_FS quick regressions pass
--HG--
extra : convert_revision : 12582bef9317cd102cafdea9001f45651d34851f
2007-11-16 19:37:21 -05:00
Korey Sewell
3ee0433f7c compile-time fix for setMipsOptions function
--HG--
extra : convert_revision : e008f6d314d4891cb6ddc9cbf96fbcc6eee53b35
2007-11-16 19:15:20 -05:00
Korey Sewell
3fd291bc4e merge Ali's config change...
--HG--
extra : convert_revision : ada34ebc392d84f1225b4ff3e25f353396aa102f
2007-11-15 14:21:42 -05:00
Korey Sewell
3110b157e6 fix MIPS headers
--HG--
extra : convert_revision : 2870a146a1be0e8c80878090f39c0eaa15d2eb13
2007-11-15 14:21:01 -05:00
Korey Sewell
9cff176bbc add setMipsOptions function for MIPS usage
--HG--
extra : convert_revision : 42909d66a46201757cbdb14f75cccbd6b27d1f18
2007-11-15 14:20:41 -05:00
Ali Saidi
0896b5b897 Configs: Fix for benchmarks that don't use getopt.
--HG--
extra : convert_revision : 6cbc7bb360c282821dd9da7814e0ac8b689f5d01
2007-11-15 12:58:06 -05:00
Ali Saidi
185f0eb134 Config: Fix some errors in the splash2 config file.
--HG--
extra : convert_revision : 7bcb0f039e0609f95a081ef3aba2edb1ffa742f2
2007-11-15 03:51:28 -05:00
Korey Sewell
2692590049 Add in files from merge-bare-iron, get them compiling in FS and SE mode
--HG--
extra : convert_revision : d4e19afda897bc3797868b40469ce2ec7ec7d251
2007-11-13 16:58:16 -05:00
Ali Saidi
5a4fc93fca Checkpoint: Use checkpoint_dir, if that is not set use outdir (-d), and if that isn't set use cwd.
--HG--
extra : convert_revision : 6548dd6de376dd59285a37a03bcf2525f8fc3845
2007-11-03 14:41:00 -04:00
Ali Saidi
51345d7324 Checkpoints: Change Simulation.py to not go crazy if the simulation ends before the number of checkpoints requested are created.
--HG--
extra : convert_revision : 865179134a219b34dbbba698e1fa0da7c452e074
2007-10-25 22:20:00 -04:00
Ali Saidi
a630d77ec5 Configuration: Move iocache outside of processors loop so it works for MP systems
--HG--
extra : convert_revision : 0ba563555a94eb22a6d4e402388e75e70d3556c2
2007-10-08 15:19:58 -04:00
Gabe Black
847a18ad48 X86: Adjust the config scripts for x86 fs.
--HG--
extra : convert_revision : 36ed22b50066f54be0e51c3419babc07dd218e10
2007-10-07 17:52:36 -07:00
Ali Saidi
136cb057d4 Checkpointing: Fix directory regex
--HG--
extra : convert_revision : 4d3958eda66209373249e54e7deadd1a7442e828
2007-09-12 15:27:15 -04:00
Ali Saidi
6f9ad931cc Checkpointing: Force drain/resume when switching a CPU
--HG--
extra : convert_revision : 7d9c3f4c8c357e3a9214deba5df3581beeaf7cb6
2007-09-12 15:24:24 -04:00
Ali Saidi
dd6a21190e Configuration: Fix example script to only create one L2 if --l2cache and -nX are given as parameters.
Patch submitted by: Jonas Diemer [diemer (a) ida.ing.tu-bs.de]

--HG--
extra : convert_revision : 1dfc548d2bc33d622d829bbf385f4bf9700711cd
2007-09-05 14:57:50 -04:00
Ali Saidi
bba265ccd8 PCI: Move PCI Configuration data into devices now that we can inherit parameters.
--HG--
extra : convert_revision : bd2214b28fb46a9a9e9e204e0539be33acb548ad
2007-08-16 16:49:05 -04:00
Ali Saidi
773cb77656 Devices: Make EtherInts connect in the same way memory ports currently do.
--HG--
extra : convert_revision : 765b096785a77df9adc4791c9101b90696bd7be2
2007-08-16 16:49:02 -04:00
Ali Saidi
e9ddc7fbca Regression: fix configuration for SPARC_FS
--HG--
extra : convert_revision : 88aa9649cc1b4d8165616e98880d3d6cd2a75762
2007-08-12 19:44:04 -04:00
Vincentius Robby
ec4000e0e2 Added fastmem option.
Lets CPU accesses to physical memory bypass Bus.

--HG--
extra : convert_revision : e56e3879de47ee10951a19bfcd8b62b6acdfb30c
2007-08-08 18:43:12 -04:00
Ali Saidi
06a9f58c68 DMA: Add IOCache and fix bus bridge to optionally only send requests one
way so a cache can handle partial block requests for i/o devices.

--HG--
extra : convert_revision : a68b5ae826731bc87ed93eb7ef326a2393053964
2007-08-10 16:14:01 -04:00
Steve Reinhardt
3afc625975 merge from head
--HG--
extra : convert_revision : 21f7afe2719c00744c0981212c1ee6e442238e01
2007-08-03 03:51:30 -04:00
Ali Saidi
31a9114a3d merge, no manual changes
--HG--
extra : convert_revision : 8504bddf1f73a4186cebc03c3e52e42ea38361fc
2007-08-02 15:38:06 -04:00
Gabe Black
e719a3e4c0 Fix how the "cmd" parameter is set in se.py and remove hack in x86 process initialization code.
--HG--
extra : convert_revision : 1fc741eea956ebfa4cef488eef4333d1f50617a6
2007-08-01 18:19:23 -07:00
Ali Saidi
456a4570c1 Configuration: Update the drive systems kernel as well as the testsys kernel with cmd line option.
--HG--
extra : convert_revision : 5dfb0db65452c0b7aa3e2dc2a0209e3f8e23811f
2007-08-01 17:39:16 -04:00
Steve Reinhardt
884807a68a Fix up a bunch of multilevel coherence issues.
Atomic mode seems to work.  Timing is closer but not there yet.

--HG--
extra : convert_revision : 0dea5c3d4b973d009e9d4a4c21b9cad15961d56f
2007-07-15 20:11:06 -07:00
Steve Reinhardt
9172876dd7 Fix problem with unset max_loads in memtest.
Also make default 0, and make that mean run forever.

--HG--
extra : convert_revision : 3e60a52b1c5e334a9ef3d744cf7ee1d851ba4aa9
2007-07-15 14:32:55 -07:00
Steve Reinhardt
b1bdc3b3d9 Punt on old -n/-c memtest args.
Also added comments to document treespec format.

--HG--
extra : convert_revision : fa9e8f66b68b96a4efca8a7fe6e7c37367382d9d
2007-07-15 14:07:31 -07:00
Steve Reinhardt
ad560a6642 Add --force-bus option to memtest.py.
--HG--
extra : convert_revision : 101735cca426903704ff2edaff051fa7c5bfc46c
2007-07-15 13:22:49 -07:00
Steve Reinhardt
4bcfa916f1 New tree-based algorithm for creating more complex cache hierarchies.
--HG--
extra : convert_revision : de8dd4ef5dae0f3e084461e8ef7c549653e61d3f
2007-07-14 23:49:24 -07:00
Steve Reinhardt
07f091d6ed Get rid of remaining traces of obsolete CoherenceProtocol object.
--HG--
extra : convert_revision : c5555b00bef1b304a84886188ad2c0dcb4d7c5b9
2007-06-30 17:59:45 -07:00
Steve Reinhardt
9117c94f9c Get rid of coherence protocol object.
--HG--
extra : convert_revision : 4ff144342dca23af9a12a2169ca318a002654b42
2007-06-27 20:54:13 -07:00
Steve Reinhardt
83af0fdcf5 Getting closer...
configs/example/memtest.py:
    Add progress interval option.
src/base/traceflags.py:
    Add MemTest flag.
src/cpu/memtest/memtest.cc:
    Clean up tracing.
src/cpu/memtest/memtest.hh:
    Get rid of unused code.

--HG--
extra : convert_revision : 92bd8241a6c90bfb6d908e5a5132cbdb500cbb87
2007-06-21 11:59:17 -07:00
Steve Reinhardt
d69a763833 Merge vm1.(none):/home/stever/bk/newmem-head
into  vm1.(none):/home/stever/bk/newmem-cache2

configs/example/memtest.py:
    Hand merge redundant changes.

--HG--
extra : convert_revision : a2e36be254bf052024f37bcb23b5209f367d37e1
2007-06-17 17:30:24 -07:00
Steve Reinhardt
35cf19d441 More major reorg of cache. Seems to work for atomic mode now,
timing mode still broken.

configs/example/memtest.py:
    Revamp options.
src/cpu/memtest/memtest.cc:
    No need for memory initialization.
    No need to make atomic response... memory system should do that now.
src/cpu/memtest/memtest.hh:
    MemTest really doesn't want to snoop.
src/mem/bridge.cc:
    checkFunctional() cleanup.
src/mem/bus.cc:
src/mem/bus.hh:
src/mem/cache/base_cache.cc:
src/mem/cache/base_cache.hh:
src/mem/cache/cache.cc:
src/mem/cache/cache.hh:
src/mem/cache/cache_blk.hh:
src/mem/cache/cache_builder.cc:
src/mem/cache/cache_impl.hh:
src/mem/cache/coherence/coherence_protocol.cc:
src/mem/cache/coherence/coherence_protocol.hh:
src/mem/cache/coherence/simple_coherence.hh:
src/mem/cache/miss/SConscript:
src/mem/cache/miss/mshr.cc:
src/mem/cache/miss/mshr.hh:
src/mem/cache/miss/mshr_queue.cc:
src/mem/cache/miss/mshr_queue.hh:
src/mem/cache/prefetch/base_prefetcher.cc:
src/mem/cache/tags/fa_lru.cc:
src/mem/cache/tags/fa_lru.hh:
src/mem/cache/tags/iic.cc:
src/mem/cache/tags/iic.hh:
src/mem/cache/tags/lru.cc:
src/mem/cache/tags/lru.hh:
src/mem/cache/tags/split.cc:
src/mem/cache/tags/split.hh:
src/mem/cache/tags/split_lifo.cc:
src/mem/cache/tags/split_lifo.hh:
src/mem/cache/tags/split_lru.cc:
src/mem/cache/tags/split_lru.hh:
src/mem/packet.cc:
src/mem/packet.hh:
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/tport.cc:
    More major reorg.  Seems to work for atomic mode now,
    timing mode still broken.

--HG--
extra : convert_revision : 7e70dfc4a752393b911880ff028271433855ae87
2007-06-17 17:27:53 -07:00
Nathan Binkert
d14256f9ba the cmd argument is supposed to be an array of parameters, not one string
--HG--
extra : convert_revision : dffdaa94a1f28f3709515a9eeed420552d8c7b22
2007-06-10 13:57:48 -07:00
Nathan Binkert
e9936a6250 More realistic parameters
--HG--
extra : convert_revision : aaa4ea2b7c97df3d6b731e9252984b45715e9d6f
2007-06-09 22:43:08 -07:00
Ali Saidi
48133a0f04 fix SPARC....
configs/common/FSConfig.py:
    fix SPARC

--HG--
extra : convert_revision : 34a36c0f626f3fb8a1526ec194a9b0cdae32fed4
2007-06-04 12:03:38 -04:00
Nathan Binkert
35147170f9 Move SimObject python files alongside the C++ and fix
the SConscript files so that only the objects that are
actually available in a given build are compiled in.
Remove a bunch of files that aren't used anymore.

--HG--
rename : src/python/m5/objects/AlphaTLB.py => src/arch/alpha/AlphaTLB.py
rename : src/python/m5/objects/SparcTLB.py => src/arch/sparc/SparcTLB.py
rename : src/python/m5/objects/BaseCPU.py => src/cpu/BaseCPU.py
rename : src/python/m5/objects/FuncUnit.py => src/cpu/FuncUnit.py
rename : src/python/m5/objects/IntrControl.py => src/cpu/IntrControl.py
rename : src/python/m5/objects/MemTest.py => src/cpu/memtest/MemTest.py
rename : src/python/m5/objects/FUPool.py => src/cpu/o3/FUPool.py
rename : src/python/m5/objects/FuncUnitConfig.py => src/cpu/o3/FuncUnitConfig.py
rename : src/python/m5/objects/O3CPU.py => src/cpu/o3/O3CPU.py
rename : src/python/m5/objects/OzoneCPU.py => src/cpu/ozone/OzoneCPU.py
rename : src/python/m5/objects/SimpleOzoneCPU.py => src/cpu/ozone/SimpleOzoneCPU.py
rename : src/python/m5/objects/BadDevice.py => src/dev/BadDevice.py
rename : src/python/m5/objects/Device.py => src/dev/Device.py
rename : src/python/m5/objects/DiskImage.py => src/dev/DiskImage.py
rename : src/python/m5/objects/Ethernet.py => src/dev/Ethernet.py
rename : src/python/m5/objects/Ide.py => src/dev/Ide.py
rename : src/python/m5/objects/Pci.py => src/dev/Pci.py
rename : src/python/m5/objects/Platform.py => src/dev/Platform.py
rename : src/python/m5/objects/SimConsole.py => src/dev/SimConsole.py
rename : src/python/m5/objects/SimpleDisk.py => src/dev/SimpleDisk.py
rename : src/python/m5/objects/Uart.py => src/dev/Uart.py
rename : src/python/m5/objects/AlphaConsole.py => src/dev/alpha/AlphaConsole.py
rename : src/python/m5/objects/Tsunami.py => src/dev/alpha/Tsunami.py
rename : src/python/m5/objects/T1000.py => src/dev/sparc/T1000.py
rename : src/python/m5/objects/Bridge.py => src/mem/Bridge.py
rename : src/python/m5/objects/Bus.py => src/mem/Bus.py
rename : src/python/m5/objects/MemObject.py => src/mem/MemObject.py
rename : src/python/m5/objects/PhysicalMemory.py => src/mem/PhysicalMemory.py
rename : src/python/m5/objects/BaseCache.py => src/mem/cache/BaseCache.py
rename : src/python/m5/objects/CoherenceProtocol.py => src/mem/cache/coherence/CoherenceProtocol.py
rename : src/python/m5/objects/Repl.py => src/mem/cache/tags/Repl.py
rename : src/python/m5/objects/Process.py => src/sim/Process.py
rename : src/python/m5/objects/Root.py => src/sim/Root.py
rename : src/python/m5/objects/System.py => src/sim/System.py
extra : convert_revision : 173f8764bafa8ef899198438fa5573874e407321
2007-05-27 19:21:17 -07:00
Steve Reinhardt
9f1c104ccd memtest.py:
Make clocks more reasonable.
Fix bug in sense of options.timing flag.

configs/example/memtest.py:
    Fix bug in sense of options.timing flag.
configs/example/memtest.py:
    Make clocks more reasonable.

--HG--
extra : convert_revision : 3715697988c56e92a4da129b42026d0623f5e85e
2007-05-22 06:22:27 -07:00
Steve Reinhardt
0305159abf PhysicalMemory has vector of uniform ports instead of one special one.
configs/example/memtest.py:
    PhysicalMemory has vector of uniform ports instead of one special one.
    Other updates to fix obsolete brokenness.
src/mem/physical.cc:
src/mem/physical.hh:
src/python/m5/objects/PhysicalMemory.py:
    Have vector of uniform ports instead of one special one.
src/python/swig/pyobject.cc:
    Add comment.

--HG--
extra : convert_revision : a4a764dcdcd9720bcd07c979d0ece311fc8cb4f1
2007-05-19 00:24:34 -04:00
Ali Saidi
0934f259d6 add an l2 cache option to se example config
configs/common/Options.py:
configs/example/fs.py:
    move l2 cache option to Options.py

--HG--
extra : convert_revision : 5c0071c2827f7db6d56229d5276326364b50f0c8
2007-05-15 18:06:35 -04:00
Ali Saidi
f317227b4e hopefully the final hacky change to make the bus bridge work ok
cache blocks that get dmaed ARE NOT marked invalid in the caches so it's a performance issue here

src/mem/bridge.cc:
src/mem/bridge.hh:
    hopefully the final hacky change to make the bus bridge work ok

--HG--
extra : convert_revision : 62cbc65c74d1a84199f0a376546ec19994c5899c
2007-05-15 17:39:50 -04:00
Ali Saidi
57104ea5f9 couple more bug fixes for intel nic
src/dev/i8254xGBe.cc:
src/dev/i8254xGBe.hh:
    couple more bug fixes

--HG--
extra : convert_revision : ae5b806528c1ec06f0091e1f6e50fc0721057ddb
2007-05-14 16:37:00 -04:00
Ali Saidi
634d2e9d83 remove hit_latency and make latency do the right thing
set the latency parameter in terms of a latency
add caches to tsunami-simple configs

configs/common/Caches.py:
tests/configs/memtest.py:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
    set the latency parameter in terms of a latency
configs/common/FSConfig.py:
    give the bridge a default latency too
src/mem/cache/cache_builder.cc:
src/python/m5/objects/BaseCache.py:
    remove hit_latency and make latency do the right thing
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
    add caches to tsunami-simple configs

--HG--
extra : convert_revision : 37bef7c652e97c8cdb91f471fba62978f89019f1
2007-05-10 18:24:48 -04:00
Ali Saidi
0dfc29a023 fix partial writes with a functional memory hack
figure out the block size from devices attached to the bus otherwise use a default block size when no devices that care are attached

configs/common/FSConfig.py:
src/mem/bridge.cc:
src/mem/bridge.hh:
src/python/m5/objects/Bridge.py:
    fix partial writes with a functional memory hack
src/mem/bus.cc:
src/mem/bus.hh:
src/python/m5/objects/Bus.py:
    figure out the block size from devices attached to the bus otherwise use a default block size when no devices that care are attached
src/mem/packet.cc:
    fix WriteInvalidateResp to not be a request that needs a response since it isn't
src/mem/port.hh:
    by default return 0 for deviceBlockSize instead of panicing. This makes finding the block size the bus should use easier

--HG--
extra : convert_revision : 3fcfe95f9f392ef76f324ee8bd1d7f6de95c1a64
2007-05-07 14:42:03 -04:00
Ali Saidi
6e60d5c12f add a udp stream benchmark and a udp loopback benchmark
--HG--
extra : convert_revision : 9300c67a1258e57436eba6cbdbed8fdf93fb6e59
2007-04-30 13:08:21 -04:00
Ali Saidi
e77aa3d212 make ping actually end
--HG--
extra : convert_revision : 6932d050a821abc7871bc73051688a986dcea364
2007-04-30 13:07:05 -04:00
Kevin Lim
522e59840f Fix mutex test script for latest disk image.
--HG--
extra : convert_revision : 1b0a251046674db1be8c9a2c026ff8c17f9cea06
2007-04-26 00:10:06 -04:00
Ron Dreslinski
c47804002a Fix the splash2 run script
--HG--
extra : convert_revision : 2b5f6718ac93d3d1b9b1d1b290f1ff5fa10cd0d8
2007-04-23 16:03:53 -04:00
Lisa Hsu
25e92383c8 spec-surge-client.rcS:
fix script to reflect new benchmark directory sturcture

configs/boot/spec-surge-client.rcS:
    fix script to reflect new benchmark directory sturcture

--HG--
extra : convert_revision : 45f9d8aebabd1f3f8d1e826e07840e2365511a35
2007-04-20 20:21:59 -04:00
Gabe Black
39c4ea3473 Fix mcf benchmark object so it gets the arguments it expects.
--HG--
extra : convert_revision : 47087be1f89699e9f8e0dc023abbf593bc0f6618
2007-03-22 00:10:47 -04:00
Nathan Binkert
d55b25cde6 Move all of the parameters of the Root SimObject so they are
directly configured by python.  Move stuff from root.(cc|hh) to
core.(cc|hh) since it really belogs there now.
In the process, simplify how ticks are used in the python code.

--HG--
extra : convert_revision : cf82ee1ea20f9343924f30bacc2a38d4edee8df3
2007-03-06 11:13:43 -08:00
Ali Saidi
82874eefca Merge zizzer:/bk/newmem
into  zeep.pool:/z/saidi/work/m5.newmem

--HG--
extra : convert_revision : fd6464c9883783c7c2cbefba317f4a0f20dd24cb
2007-03-03 19:03:22 -05:00
Ali Saidi
1694c65ba1 Add Iob and remove the fake device
configs/common/FSConfig.py:
    add an attachOnChipIO to force people to think about where "onchip" i/o should be connected in their hierarchy

--HG--
extra : convert_revision : cf79a9a00760b7daf28063f407a04bd38b956843
2007-03-03 19:02:31 -05:00
Ali Saidi
36f43ff6a5 Implement Niagara I/O interface and rework interrupts
configs/common/FSConfig.py:
    Use binaries we've compiled instead of the ones that come with Legion
src/arch/alpha/interrupts.hh:
    get rid of post(int int_type) and add a get_vec function that gets the interrupt vector for an interrupt number
src/arch/sparc/asi.cc:
    Add AsiIsInterrupt() to AsiIsMmu()
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
    Add InterruptVector type
src/arch/sparc/interrupts.hh:
    rework interrupts. They are no longer cleared when created... A I/O or ASI read/write needs to happen before they are cleared
src/arch/sparc/isa_traits.hh:
    Add the "interrupt" trap types to isa traits
src/arch/sparc/miscregfile.cc:
    add names for all the misc registers and possible post an interrupt when TL is changed.
src/arch/sparc/miscregfile.hh:
    Add a helper function to post an interrupt when pil < some set softint
src/arch/sparc/regfile.cc:
src/arch/sparc/regfile.hh:
    InterruptLevel shouldn't really live here, moved to interrupt.hh
src/arch/sparc/tlb.cc:
    Add interrupt ASIs to TLB
src/arch/sparc/ua2005.cc:
    Add checkSoftInt to check if a softint needs to be posted
    Check that a tickCompare isn't scheduled before scheduling one
    Post and clear interrupts on queue writes and what not
src/base/bitfield.hh:
    Add an helper function to return the msb that is set
src/cpu/base.cc:
src/cpu/base.hh:
    get rid of post_interrupt(type) since it's no longer needed.. Add a way to see what interrupts are pending
src/cpu/intr_control.cc:
src/cpu/intr_control.hh:
src/dev/alpha/tsunami_cchip.cc:
src/python/m5/objects/IntrControl.py:
    Make IntrControl have a system pointer rather than using a cpu pointer to get one
src/dev/sparc/SConscript:
    add iob to SConsscrip
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.out:
tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.ini:
tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.out:
    update config.ini/out for intrcntrl not having a cpu pointer anymore

--HG--
extra : convert_revision : 38614f6b9ffc8f3c93949a94ff04b7d2987168dd
2007-03-03 17:22:47 -05:00
Gabe Black
4b4b46ea90 Keep around which input set was used for a benchmark, and make vortex work with SPARC.
--HG--
extra : convert_revision : c891435a31e81fb8294484aedf340c0c96c8afa2
2007-03-03 03:34:53 +00:00
Nathan Binkert
fa4c3d74fe Get rid of the ConsoleListener SimObject and just fold the
relevant code directly into the SimConsole object.  Now,
you can easily turn off the listen port by just specifying
0 as the port.

--HG--
extra : convert_revision : c8937fa45b429d8a0728e6c720a599e38972aaf0
2007-02-21 22:14:11 -08:00
Ali Saidi
3fa5816dcf fix some checkpointing annoyances
-m works as you think it should
Ctrl-C actually ends the simulation now

--HG--
extra : convert_revision : f2269dc90d165c716459ec61f5f7b1ea3c1d4ae2
2007-01-30 18:21:42 -05:00
Gabe Black
1352e55ceb Merge zizzer.eecs.umich.edu:/bk/newmem
into  ewok.(none):/home/gblack/m5/newmemo3

src/sim/byteswap.hh:
    Hand Merge

--HG--
extra : convert_revision : 640d33ad0c416934e8a5107768e7f1dce6709ca8
2007-01-22 22:31:48 -08:00
Ali Saidi
7933aade85 add memory mapped disk device
configs/common/FSConfig.py:
src/python/m5/objects/T1000.py:
    add configuration for memory mapped disk
src/dev/sparc/SConscript:
    add memory mapped disk to sconscript

--HG--
extra : convert_revision : d8df4a455cf48000042d0ff93a274985f4dbe905
2007-01-09 22:16:49 -05:00
Gabe Black
8840ebcb00 Merge zizzer:/bk/newmem
into  zower.eecs.umich.edu:/eecshome/m5/newmem

--HG--
extra : convert_revision : f4a05accb8fa24d425dd818b1b7f268378180e99
2007-01-03 00:52:30 -05:00
Nathan Binkert
91ffe811a3 Add options for setting the kernel to run and the
script to run

--HG--
extra : convert_revision : 32ad8e08ca74edf042d8606ca4876cbe1193e932
2006-12-22 21:51:19 -08:00
Ali Saidi
ecbb8debf6 Many more fixes for SPARC_FS. Gets us to the point where SOFTINT starts
getting touched.

configs/common/FSConfig.py:
    Physical memory on the T1 starts at 1MB, The first megabyte is unmapped to catch bugs
src/arch/isa_parser.py:
    we should readmiscregwitheffect not readmiscreg
src/arch/sparc/asi.cc:
    Fix AsiIsNucleus spelling with respect to header file
    Add ASI_LSU_CONTROL_REG to AsiSiMmu
src/arch/sparc/asi.hh:
    Fix spelling of two ASIs
src/arch/sparc/isa/decoder.isa:
    switch back to defaults letting the isa_parser insert readMiscRegWithEffect
src/arch/sparc/isa/formats/mem/util.isa:
    Flesh out priviledgedString with hypervisor checks
    Make load alternate set the flags correctly
src/arch/sparc/miscregfile.cc:
    insert some forgotten break statements
src/arch/sparc/miscregfile.hh:
    Add some comments to make it easier to find which misc register is which number
src/arch/sparc/tlb.cc:
    flesh out the tlb memory mapped registers a lot more
src/base/traceflags.py:
    add an IPR traceflag
src/mem/request.hh:
    Fix a bad assert() in request

--HG--
extra : convert_revision : 1e11aa004e8f42c156e224c1d30d49479ebeed28
2006-12-06 14:29:10 -05:00
Lisa Hsu
e86832bed8 automatically build sparc system or alpha system.
configs/example/fs.py:
    make it an automatic system build for alpha vs. sparc.

--HG--
extra : convert_revision : 4c217cf9309c6209be7f80e358f6640857a785e8
2006-12-04 19:37:50 -05:00
Lisa Hsu
0d62558d55 Merge zizzer:/bk/sparcfs
into  zed.eecs.umich.edu:/z/hsul/work/sparc/m5

--HG--
extra : convert_revision : 3bce43982689e9bda3a12e21a24b5ea390f347b8
2006-12-04 17:51:07 -05:00
Ali Saidi
92c5a5c8cb More changes to get SPARC fs closer. Now at 1.2M cycles before difference
configs/common/FSConfig.py:
    seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
    change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
    For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
    Use instruction count from cpu rather than cycles because that is what legion does
    we can change it back after were done with legion
src/base/bitfield.hh:
    add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
    add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
    compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
    change asserts of packet success to if panics wrapped with NDEBUG defines
    so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
    expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
    convert some tabs to spaces
src/python/m5/objects/T1000.py:
    add more fake devices for each l1 bank and each memory controller

--HG--
extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
2006-12-04 00:54:40 -05:00
Lisa Hsu
55b4ea0444 Merge zizzer:/bk/sparcfs
into  zed.eecs.umich.edu:/z/hsul/work/sparc/m5

--HG--
extra : convert_revision : 07119747d9b08ea51f21942e36f22afcc62f16e1
2006-12-01 15:04:48 -05:00
Ali Saidi
8c4f7a0404 Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
Add the ability to use an address mask for symbol loading
Rather then silently failing on platform accesses panic
Move BadAddr/IsaFake no Device from Tsunami
Let the system kernel be none, but warn about it

configs/common/FSConfig.py:
    We don't have a kernel for sparc yet
src/arch/sparc/system.cc:
    Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
src/base/loader/aout_object.cc:
src/base/loader/aout_object.hh:
src/base/loader/ecoff_object.cc:
src/base/loader/ecoff_object.hh:
src/base/loader/elf_object.cc:
src/base/loader/elf_object.hh:
src/base/loader/object_file.hh:
src/base/loader/raw_object.cc:
src/base/loader/raw_object.hh:
    Add the ability to use an address mask for symbol loading
src/dev/sparc/t1000.cc:
    Rather then silently failing on platform accesses panic
src/dev/sparc/t1000.hh:
    fix up a couple of platform comments
src/python/m5/objects/Bus.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/T1000.py:
src/python/m5/objects/Tsunami.py:
    Move BadAddr/IsaFake no Device from Tsunami
src/python/m5/objects/System.py:
    Let kernel be none
src/sim/system.cc:
    Let the system kernel be none, but warn about it

--HG--
extra : convert_revision : 92f6afef599a3d3c7c5026d03434102c41c7b5f4
2006-11-30 15:51:54 -05:00
Lisa Hsu
df6c12e716 netperf-maerts-client.rcS:
change /netperf/netperf to /netperf-bin/netperf
nat-netperf-maerts-client.rcS:
bad comment that went with the file - accidentally committed but probably doesn't matter, i ust eliminated an ivlb in the script.

configs/boot/nat-netperf-maerts-client.rcS:
    replace netperf/netperf with netperf-bin/netperf
configs/boot/netperf-maerts-client.rcS:
    change /netperf/netperf to /netperf-bin/netperf

--HG--
extra : convert_revision : 32fed0042e267f315d3e688ebc4b66d7002b85f0
2006-11-30 11:53:33 -05:00
Gabe Black
5bdf4400b2 Merge zizzer:/bk/sparcfs
into  zower.eecs.umich.edu:/eecshome/m5/newmemmid

src/arch/sparc/isa_traits.hh:
src/arch/sparc/miscregfile.hh:
    hand merge

--HG--
extra : convert_revision : 34f50dc5e6e22096cb2c08b5888f2b0fcd418f3e
2006-11-29 17:34:20 -05:00
Kevin Lim
07e525e8b7 Include check for making sure caches are enabled.
--HG--
extra : convert_revision : e3902b065db524ebe5bf762e44a840133ccb8d75
2006-11-26 11:46:58 -05:00
Gabe Black
f85082e0a0 Added a parameter to set memory to zero. This is to support Legion, and once we can make our own hypervisor binary, we probably won't need it.
--HG--
extra : convert_revision : 168883e4a5d3760962cd9759a6f41c66f5a6402a
2006-11-22 23:09:27 -05:00
Gabe Black
0a99750ebf Merge zizzer:/bk/sparcfs
into  zower.eecs.umich.edu:/eecshome/m5/newmem

--HG--
extra : convert_revision : 75f3398e38e18eb1f8248e23708d7a8d8cce0fc5
2006-11-22 15:45:32 -05:00
Gabe Black
cd2727694d Add in rom/rams for the nvram, hypervisor description, and partition description.
--HG--
extra : convert_revision : a49de5fcfbea307c971964b8a68b95eb5d9a2bf4
2006-11-20 17:59:35 -05:00
Nathan Binkert
bd8cc37650 Implement a single config file to encompass all of the SPEC
CPU2000 stuff, and use it in all of the tests that currently
use SPEC

--HG--
extra : convert_revision : 8cd26a597e51a90b6d2810d344a075f5aa0f011b
2006-11-16 13:10:38 -08:00
Gabe Black
74654ddd1f Merge zower.eecs.umich.edu:/home/gblack/m5/newmemmemops
into  zower.eecs.umich.edu:/eecshome/m5/newmem

--HG--
extra : convert_revision : 74b2352b8f088e38cd1ecf3a8233b45df0476d93
2006-11-16 14:42:44 -05:00
Gabe Black
cd5b33b9ff Fixes for SPARC_FS
configs/common/FSConfig.py:
    Make a SPARC system create an IO bus.
src/python/m5/objects/T1000.py:
    Create a T1000 platform
src/arch/sparc/miscregfile.cc:
    Initialize the strand status register to the value legion provides.
src/cpu/exetrace.cc:
    Truncate an ExtMachInst to a MachInst before comparing with Legion.

--HG--
extra : convert_revision : e4189b572a5297e8362f5bd26d87b74736c8e5f1
2006-11-16 12:34:10 -05:00
Ron Dreslinski
dbdf2f14ae Add L2 cache option to fs.py --l2cache
--HG--
extra : convert_revision : 5bdd1129c3b23e91d441e7b83f6a824ef7740fab
2006-11-15 18:22:15 -05:00
Ron Dreslinski
023fccff0e Update splash2 config files
configs/splash2/run.py:
    Fix MaxTick for splash configs
configs/splash2/cluster.py:
    Add a config that allows clusters of CPU's to be attached to a single L1

--HG--
extra : convert_revision : 1bb0a0c5f4889316940a9858be90ae2eaa849f1a
2006-11-13 16:09:47 -05:00
Kevin Lim
3052632b68 Merge ktlim@zamp:./local/clean/tmp/test-regress
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix

--HG--
extra : convert_revision : b98236507bb8996ce605b48b5a5a6a7aac297dc5
2006-11-12 21:57:58 -05:00
Ron Dreslinski
6098f57b08 Update for maxtick in splash2/memtest configs
configs/example/memtest.py:
configs/splash2/run.py:
    Update for maxtick

--HG--
extra : convert_revision : 94106625be1ebc2b614db16720a4861e47222c0b
2006-11-12 11:42:07 -05:00
Kevin Lim
73581bf801 Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix

--HG--
extra : convert_revision : 56cb7fe3be5b63bd89b48ac6cb88b47d13b4c137
2006-11-10 12:14:38 -05:00
Ali Saidi
cb172d0332 Get SPARC to the point that it starts running. Add ability to load the ROM bin files, cleanup lockstep printing a bit
Since we don't have a platform yet, you need to comment out the default responder stuff in Bus.py to make it work.

SConstruct:
    Add TARGET_ISA to the list of environment variables that end up in the build_env for python
configs/common/FSConfig.py:
    add a simple SPARC system to being testing with, you'll need to change makeLinuxAlphaSystem to makeSparcSystem in fs.py for now
src/SConscript:
    add a raw file object, at least until we get more info about how to compile openboot properly
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
    add parameters for ROM files (OBP/Reset/Hypervisor), a ROM, load files into ROM
src/base/loader/object_file.cc:
src/base/loader/object_file.hh:
    add option to try raw when nothing works
src/cpu/exetrace.cc:
    cleanup lockstep printing a little bit
src/cpu/m5legion_interface.h:
    change the instruction to be 32 bits because it is
src/mem/physical.cc:
    fix assert that doesn't work if memory starts somewhere above 0
src/python/m5/objects/BaseCPU.py:
    Add if statement to choose between sparc tlbs and alpha tlbs
src/python/m5/objects/System.py:
    Add a sparc system that sets the rom addresses correctly
src/python/m5/params.py:
    add the ability to add Addr() together

--HG--
extra : convert_revision : bbbd8a56134f2dda2728091f740e2f7119b0c4af
2006-11-09 18:22:46 -05:00
Kevin Lim
6591ebb098 Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix

--HG--
extra : convert_revision : dafe2d4a032b277c219ea13faf20567c20c1f2f4
2006-11-09 15:06:00 -05:00
Kevin Lim
0ba2cc6571 Clean up config scripts to not have to worry about attaching a cache only to the TimingCPU. Now the Atomic CPU works with caches.
configs/common/Simulation.py:
    Atomic CPU now works properly with caches, so we don't have to do extra parsing to hook up caches only to the timing CPU.

    However the O3CPU must always use caches, so a check for that must still exist.

    Also change the switch_cpus to be placed at the system level, now that Steve changed how the IntrController gets its CPU.
configs/example/fs.py:
configs/example/se.py:
    Atomic CPU now handles caches.

--HG--
extra : convert_revision : 534ded558ef96cafd76b4b5c5317bd8f4d05076e
2006-11-09 15:05:13 -05:00
Lisa Hsu
64c0d82dec simplify maxtick parsing in both the python and the c++.
configs/common/Simulation.py:
    simplify maxtick code a little bit - instead of checking for -1, just set it at MaxTick.
src/python/m5/__init__.py:
    make a new m5 param called MaxTick.
src/sim/host.hh:
    fix the M5 def. of MaxTick
src/sim/main.cc:
    Simplify the MaxTick/num_cycles parsing within main.cc

--HG--
extra : convert_revision : f800addfbc1323591c2e05b892276b439b671668
2006-11-08 15:05:23 -05:00
Lisa Hsu
5a46f336a1 make rcS files read from the m5 source directory, not /dist.
--HG--
extra : convert_revision : 45a2dbf5b05b19dd60fbc3a5b10e9355c8351e3b
2006-11-08 14:10:25 -05:00
Lisa Hsu
0a0d9cd3ab change to os.path.join like nate wanted.
--HG--
extra : convert_revision : 6e8a0153adf04f0cc07904434e4cb6a83fe900eb
2006-11-08 14:01:23 -05:00
Lisa Hsu
74ff45d353 factor some more commone code and enable going from checkpoint into arbitrary CPU with or without caches.
configs/common/Simulation.py:
    enable going from checkpoint into arbitrary CPU with or without caches.

--HG--
extra : convert_revision : 02e7ff8982fdb3a08bc609f89bd58df5b3a581b2
2006-11-01 19:25:09 -05:00
Lisa Hsu
7665be4f70 make it so that you can do a standard switch without the caches option. this will have only the o3 cpu have a cache, rather than timing (warmup) + o3 have cache.
--HG--
extra : convert_revision : d733de7ebb362bbd7376a0235ee7f117df2d6d37
2006-11-01 11:49:39 -05:00
Lisa Hsu
9ef8bf74c7 change name of 2nd switch_cpu so that ckpt recovery with multiple cpus doens't get confused.
--HG--
extra : convert_revision : 16c710c4196c520d03c1993a26f38cf1f04ab637
2006-11-01 11:40:49 -05:00
Kevin Lim
f763864786 Fix up configs.
configs/common/Simulation.py:
    Remove mem parameter.
configs/example/se.py:
    Remove debug output that got included in my other push.

--HG--
extra : convert_revision : 643c34147f6c6cbb98b8e6d6e8206b9859593ab0
2006-10-31 14:58:09 -05:00
Kevin Lim
5825a6c9d8 Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix

configs/example/fs.py:
configs/example/se.py:
src/mem/tport.hh:
    Hand merge.

--HG--
extra : convert_revision : b9df95534d43b3b311f24ae24717371d03d615bf
2006-10-31 14:37:19 -05:00
Kevin Lim
bfd5eb2b08 Remove mem parameter. Now the translating port asks the CPU's dcache's peer for its MemObject instead of having to have a paramter for the MemObject.
configs/example/fs.py:
configs/example/se.py:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.cc:
src/cpu/thread_state.hh:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
    No need for mem parameter any more.
src/cpu/checker/cpu.cc:
    Use new constructor for simple thread (no more MemObject parameter).
src/cpu/checker/cpu.hh:
    Remove MemObject parameter.
src/cpu/memtest/memtest.hh:
    Ports now take in their MemObject owner.
src/cpu/o3/alpha/cpu_builder.cc:
    Remove mem parameter.
src/cpu/o3/alpha/cpu_impl.hh:
    Remove memory parameter and clean up handling of TranslatingPort.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/params.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/atomic.cc:
    Remove memory parameter.

--HG--
extra : convert_revision : 43cb44a33b31320d44b69679dcf646c0380d07d3
2006-10-31 14:33:56 -05:00
Lisa Hsu
697b432ba8 FSConfig.py:
Accidentally committed this last time

configs/common/FSConfig.py:
    Accidentally committed this last time

--HG--
extra : convert_revision : 32d49c17c661b57a9aa9c3b057258f6e037ba745
2006-10-30 16:55:52 -05:00
Lisa Hsu
580c8421ab se.py, fs.py:
import Caches
Simulation.py:
Fix typo - L2Cache --> L1Cache

configs/common/Simulation.py:
    Fix typo - L2Cache --> L1Cache
configs/example/fs.py:
configs/example/se.py:
    import Caches

--HG--
extra : convert_revision : 4292225b322c069665262eab7c83b5341844fba0
2006-10-30 16:51:46 -05:00
Lisa Hsu
fe2698c435 ensure that there is a "/" between the cptdir and the cpt.%d.
--HG--
extra : convert_revision : 9aed7c3aecad10b039f3cfb26e04a7950be6bed1
2006-10-30 14:19:16 -05:00
Lisa Hsu
13cbd4e94b Merge zizzer:/bk/newmem
into  zed.eecs.umich.edu:/z/hsul/work/m5/newmem

--HG--
extra : convert_revision : 836fcb45f399ed4f860be2d0bfe2ac4709bfe2ef
2006-10-30 14:15:50 -05:00
Lisa Hsu
883f0394f5 decouple the switch option from the warmup period option - parsing was confused otherwise, oops.
--HG--
extra : convert_revision : 951fc664c59363df5f5e026aa791d83c26f050ec
2006-10-30 14:12:15 -05:00
Kevin Lim
bc93802fb8 Use some python os.path stuff to make it more flexible where we can execute this script from.
--HG--
extra : convert_revision : a76861a0f2669a7cd3bf3a34177739c69a913545
2006-10-30 14:01:34 -05:00
Lisa Hsu
b40af2328a add some comments and make the warmup period in a switchover parameterizable.
configs/common/Options.py:
    make the warmup period in a standard switch part of the option.
configs/common/Simulation.py:
    add some comments and also make the warmup period an option.

--HG--
extra : convert_revision : 0fa587291b97ff87c3b3a617e7359ac6d9bed7a5
2006-10-30 13:33:27 -05:00
Lisa Hsu
a6fd29ddf9 factor out common run code from se.py and fs.py.
configs/example/fs.py:
    factor out common code.
configs/example/se.py:
    factor out common code

--HG--
extra : convert_revision : 72a1f653c84eae1b7d281e0a5e60ee116ad6b27d
2006-10-27 16:32:26 -04:00
Ali Saidi
86bd01dfc9 Fix fs.py. Lisa did you test this? Is there some wierd python version thing?
--HG--
extra : convert_revision : 6df5f90d5b66e7af27d4f524744b9dc3c703a588
2006-10-24 13:10:31 -04:00
Lisa Hsu
3922b2e076 warmup of 1B cpu cycles.
configs/example/fs.py:
configs/example/se.py:
    warm up of 1B CPU cycles

--HG--
extra : convert_revision : 0f3263f466fde4cd86e0663930e83617a6b3faad
2006-10-23 19:32:57 -04:00
Lisa Hsu
764f27a0c9 Merge zizzer:/bk/newmem
into  zed.eecs.umich.edu:/z/hsul/work/m5/newmem

--HG--
extra : convert_revision : bb58679e101570d50c040519fb08ffbabfee7416
2006-10-23 18:46:05 -04:00
Lisa Hsu
049f8d53a9 make a lot of the same changes as to fs.py for checkpointing.
1) rearrange the options to be in a nice logical order
2) add an option for what i call "standard switch", which is from simple->timing->detailed
3) make checkpointing code such that checkpoints taken from the command line override checkpoint instructions compiled into binaries.
4) add an option for maximum number of checkpoints - simulation will stop at max or maxtick, whichever is first

--HG--
extra : convert_revision : 8d905e1b297ae664d60f8c8ba48b2aac25437fc6
2006-10-23 18:42:46 -04:00
Lisa Hsu
40a04f2f40 changes regarding fs.py
1) rearrange the options to be in a nice logical order
2) add an option for what i call "standard switch", which is from simple->timing->detailed
3) change the client/server naming system to testsys/drivesys
4) make checkpointing code such that checkpoints taken from the command line override checkpoint instructions compiled into binaries.
5) add an option for maximum number of checkpoints - simulation will stop at max or maxtick, whichever is first

doesn't fully work because of a caching issue, but the python side of things i think should work - the counterpart of se.py does work.
i think i should factor out a lot of the common code in both, but i'll do that after this checkin, just to get this in the tree.

configs/example/fs.py:
    1) rearrange the options to be in a nice logical order
    2) add an option for what i call "standard switch", which is from simple->timing->detailed
    3) change the client/server naming system to testsys/drivesys
    4) make checkpointing code such that checkpoints taken from the command line override checkpoint instructions compiled into binaries.
    5) add an option for maximum number of checkpoints - simulation will stop at max or maxtick, whichever is first

--HG--
extra : convert_revision : 078e22800ff83f6e950bf5cc6fb16a98320e7c51
2006-10-23 18:07:51 -04:00
Steve Reinhardt
d2856c2fde Add mutex test to Benchmarks.py.
--HG--
extra : convert_revision : 9b4f1ce9a181ac5a01e5b6a68067079969dfe9ce
2006-10-22 12:52:58 -04:00
Ron Dreslinski
30cd2298df Add some default options, point it to the /dist version of the splash benchmarks
--HG--
extra : convert_revision : cd3b4f395b360d646b8b60464768eaad0fd110a4
2006-10-20 21:13:10 -04:00
Ron Dreslinski
e198e58e1e Clean up splash2 so it works in v2.0
configs/splash2/run.py:
    Update the splash2 file

--HG--
extra : convert_revision : b57ef1ab4b8fd1eaf281358db623b7581b96546b
2006-10-20 19:53:52 -04:00
Ron Dreslinski
ad783962c5 Give physical memory some latency to stress the system
--HG--
extra : convert_revision : 3ca32ff9140770d0774cac5e82807a0574db09dd
2006-10-20 13:36:26 -04:00
Ron Dreslinski
316e0fa879 Add a config file in the example with the memtester and some parser options.
--HG--
extra : convert_revision : e70ccc3de4f7a3ae20ff9ec672853ee1555ed41b
2006-10-20 13:32:24 -04:00
Steve Reinhardt
bba3dfb0d3 First cut at LL/SC support in caches (atomic mode only).
configs/example/fs.py:
    Add MOESI protocol to caches (uni coherence not quite working w/FS yet).

--HG--
extra : convert_revision : 7bef7d9c5b24bf7241cc810df692408837b06b86
2006-10-19 00:33:33 -07:00
Steve Reinhardt
0128b73d05 Add --caches option to add caches to server CPUs.
--HG--
extra : convert_revision : 6aa97dcc807e175215e73c638faf73be926d4cd4
2006-10-17 23:30:11 -07:00
Steve Reinhardt
05c487ef3c Enable MP systems via cmd-line flag in fs.py.
configs/example/fs.py:
    Add flag for MP server systems.
src/python/m5/objects/AlphaConsole.py:
src/python/m5/objects/IntrControl.py:
    Change CPU from 'any' to 'cpu[0]' to work better with MP sytems.
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-timing-dual.py:
    Don't need to set console & intrcontrol cpu
    params anymore (default is fixed now).

--HG--
extra : convert_revision : 9417b12b1b395ff7d6a9f2894e4123923c754daf
2006-10-17 21:15:11 -07:00
Steve Reinhardt
96737c8a9b Rename 'Machine' to 'SysConfig'.
Clean up a little.

--HG--
extra : convert_revision : db5f36776209c76a593205c46b08aa147358f33a
2006-10-17 11:08:49 -07:00
Kevin Lim
e5b13138b1 Two minor fixes.
configs/common/SysPaths.py:
    Undo accidental change.
src/SConscript:
    Fix.

--HG--
extra : convert_revision : 665b186cff7d8ae560601ced7ae407a41a16cfea
2006-10-10 01:49:46 -04:00
Kevin Lim
bdde892d66 Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem

src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/cpu/simple/timing.hh:
tests/configs/o3-timing-mp.py:
    Hand merge.

--HG--
extra : convert_revision : a58cc439eb5e8f900d175ed8b5a85b6c8723e558
2006-10-09 22:59:56 -04:00
Lisa Hsu
67a114fc29 add in checkpoint restoration option, you can restore a checkpoint by giving a directory, and then giving a checkpoint number, the earliest checkpoint is 1, the latest is N. the default checkpoint directory is the cwd.
so you can restore by a command line like this:

m5.opt fs.py --checkpoint_dir="/my/ckpt/dir" -c 3

configs/example/fs.py:
    add in checkpoint restoration option, you can restore a checkpoint by giving a directory, and then giving a checkpoint number, the earliest checkpoint is 1, the latest is N.

--HG--
extra : convert_revision : bf9c8d3265a3875cdfb6a878005baa7ae29af90d
2006-10-09 00:12:16 -04:00
Steve Reinhardt
91c76278b9 Set cpu_id params (required by ll/sc code now).
--HG--
extra : convert_revision : e0f7ccbeccca191a8edb54494d2b4f9369e9914c
2006-10-08 19:11:06 -07:00
Kevin Lim
8949d813ff Clean up configs.
configs/common/FSConfig.py:
configs/common/SysPaths.py:
configs/example/fs.py:
configs/example/se.py:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
    Clean up configs by removing FullO3Config and instead using default values.
src/python/m5/objects/FUPool.py:
    Add in default FUPool.
src/python/m5/objects/O3CPU.py:
    Use defaults better.  Also set checker parameters, and fix up a config bug.

--HG--
extra : convert_revision : 5fd0c000143f4881f10a9a575c3810dc97cb290b
2006-10-08 01:12:42 -04:00
Lisa Hsu
54cf456fd1 add an option for defining a directory in which to place all your checkpoints. if none, default is cwd.
--HG--
extra : convert_revision : 23a602c2d800c922346c9743cc0c583d178a0ee7
2006-10-06 00:42:39 -04:00
Lisa Hsu
868d112578 fix the argument to m5.simulate() on a checkpoint.
src/sim/stat_control.cc:
    add curTick to reset stats printf.

--HG--
extra : convert_revision : da8cf5921e81b73f47d6831d539ca1fbdace3d1d
2006-10-05 13:18:32 -04:00
Kevin Lim
4ed184eade Merge ktlim@zamp:./local/clean/o3-merge/m5
into  zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem

configs/boot/micro_memlat.rcS:
configs/boot/micro_tlblat.rcS:
src/arch/alpha/ev5.cc:
src/arch/alpha/isa/decoder.isa:
src/arch/alpha/isa_traits.hh:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.hh:
src/cpu/checker/cpu_impl.hh:
src/cpu/o3/alpha/cpu_impl.hh:
src/cpu/o3/alpha/params.hh:
src/cpu/o3/checker_builder.cc:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/checker_builder.cc:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/base.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.hh:
src/dev/ide_disk.cc:
src/python/m5/objects/O3CPU.py:
src/python/m5/objects/Root.py:
src/python/m5/objects/System.py:
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
src/sim/system.hh:
util/m5/m5.c:
    Hand merge.

--HG--
rename : arch/alpha/ev5.cc => src/arch/alpha/ev5.cc
rename : arch/alpha/freebsd/system.cc => src/arch/alpha/freebsd/system.cc
rename : arch/alpha/isa/decoder.isa => src/arch/alpha/isa/decoder.isa
rename : arch/alpha/isa/mem.isa => src/arch/alpha/isa/mem.isa
rename : arch/alpha/isa_traits.hh => src/arch/alpha/isa_traits.hh
rename : arch/alpha/linux/system.cc => src/arch/alpha/linux/system.cc
rename : arch/alpha/system.cc => src/arch/alpha/system.cc
rename : arch/alpha/tru64/system.cc => src/arch/alpha/tru64/system.cc
rename : cpu/base.cc => src/cpu/base.cc
rename : cpu/base.hh => src/cpu/base.hh
rename : cpu/base_dyn_inst.hh => src/cpu/base_dyn_inst.hh
rename : cpu/checker/cpu.hh => src/cpu/checker/cpu.hh
rename : cpu/checker/cpu.cc => src/cpu/checker/cpu_impl.hh
rename : cpu/o3/alpha_cpu_builder.cc => src/cpu/o3/alpha/cpu_builder.cc
rename : cpu/checker/o3_cpu_builder.cc => src/cpu/o3/checker_builder.cc
rename : cpu/o3/commit_impl.hh => src/cpu/o3/commit_impl.hh
rename : cpu/o3/cpu.cc => src/cpu/o3/cpu.cc
rename : cpu/o3/fetch_impl.hh => src/cpu/o3/fetch_impl.hh
rename : cpu/o3/iew.hh => src/cpu/o3/iew.hh
rename : cpu/o3/iew_impl.hh => src/cpu/o3/iew_impl.hh
rename : cpu/o3/inst_queue.hh => src/cpu/o3/inst_queue.hh
rename : cpu/o3/inst_queue_impl.hh => src/cpu/o3/inst_queue_impl.hh
rename : cpu/o3/lsq_impl.hh => src/cpu/o3/lsq_impl.hh
rename : cpu/o3/lsq_unit.hh => src/cpu/o3/lsq_unit.hh
rename : cpu/o3/lsq_unit_impl.hh => src/cpu/o3/lsq_unit_impl.hh
rename : cpu/o3/mem_dep_unit_impl.hh => src/cpu/o3/mem_dep_unit_impl.hh
rename : cpu/o3/rename.hh => src/cpu/o3/rename.hh
rename : cpu/o3/rename_impl.hh => src/cpu/o3/rename_impl.hh
rename : cpu/o3/thread_state.hh => src/cpu/o3/thread_state.hh
rename : cpu/o3/tournament_pred.cc => src/cpu/o3/tournament_pred.cc
rename : cpu/o3/tournament_pred.hh => src/cpu/o3/tournament_pred.hh
rename : cpu/checker/cpu_builder.cc => src/cpu/ozone/checker_builder.cc
rename : cpu/ozone/cpu.hh => src/cpu/ozone/cpu.hh
rename : cpu/ozone/cpu_builder.cc => src/cpu/ozone/cpu_builder.cc
rename : cpu/ozone/cpu_impl.hh => src/cpu/ozone/cpu_impl.hh
rename : cpu/ozone/front_end.hh => src/cpu/ozone/front_end.hh
rename : cpu/ozone/front_end_impl.hh => src/cpu/ozone/front_end_impl.hh
rename : cpu/ozone/inorder_back_end_impl.hh => src/cpu/ozone/inorder_back_end_impl.hh
rename : cpu/ozone/inst_queue_impl.hh => src/cpu/ozone/inst_queue_impl.hh
rename : cpu/ozone/lw_back_end.hh => src/cpu/ozone/lw_back_end.hh
rename : cpu/ozone/lw_back_end_impl.hh => src/cpu/ozone/lw_back_end_impl.hh
rename : cpu/ozone/lw_lsq.hh => src/cpu/ozone/lw_lsq.hh
rename : cpu/ozone/lw_lsq_impl.hh => src/cpu/ozone/lw_lsq_impl.hh
rename : cpu/ozone/simple_params.hh => src/cpu/ozone/simple_params.hh
rename : cpu/ozone/thread_state.hh => src/cpu/ozone/thread_state.hh
rename : cpu/simple/cpu.cc => src/cpu/simple/base.cc
rename : cpu/cpu_exec_context.cc => src/cpu/simple_thread.cc
rename : cpu/thread_state.hh => src/cpu/thread_state.hh
rename : dev/ide_disk.hh => src/dev/ide_disk.hh
rename : python/m5/objects/BaseCPU.py => src/python/m5/objects/BaseCPU.py
rename : python/m5/objects/AlphaFullCPU.py => src/python/m5/objects/O3CPU.py
rename : python/m5/objects/OzoneCPU.py => src/python/m5/objects/OzoneCPU.py
rename : python/m5/objects/Root.py => src/python/m5/objects/Root.py
rename : python/m5/objects/System.py => src/python/m5/objects/System.py
rename : sim/eventq.hh => src/sim/eventq.hh
rename : sim/pseudo_inst.cc => src/sim/pseudo_inst.cc
rename : sim/pseudo_inst.hh => src/sim/pseudo_inst.hh
rename : sim/serialize.cc => src/sim/serialize.cc
rename : sim/stat_control.cc => src/sim/stat_control.cc
rename : sim/stat_control.hh => src/sim/stat_control.hh
rename : sim/system.hh => src/sim/system.hh
extra : convert_revision : 135d90e43f6cea89f9460ba4e23f4b0b85886e7d
2006-09-30 23:43:23 -04:00
Ali Saidi
44c6f953b0 Merge zizzer:/bk/newmem
into  zeep.pool:/z/saidi/work/m5.newmem.head

--HG--
extra : convert_revision : 14ac24236ff65b7e489c1ce4b4e9a295966013b8
2006-09-11 17:57:30 -04:00
Ali Saidi
46502851ab add annotation code to m5
configs/common/Benchmarks.py:
    add annotate test app
src/SConscript:
    add annotate.cc to lis
src/arch/alpha/isa/decoder.isa:
    add annotate instructions
src/base/traceflags.py:
    Add annotate trace flag
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
    add annotate pseudo ops
util/m5/m5op.S:
util/m5/m5op.h:
    add anotate ops

--HG--
extra : convert_revision : 7f965c0d84e41ce34f2ec8ec27a009276d67d8d6
2006-09-11 17:57:20 -04:00
Steve Reinhardt
545cbec5f7 Enable proxies (Self/Parent) for specifying ports.
Significant revamp of Port code.
Some cleanup of SimObject code too, particularly to
make the SimObject and MetaSimObject implementations of
__setattr__ more consistent.
Unproxy code split out of print_ini().

src/python/m5/multidict.py:
    Make get() return None by default, to match semantics
    of built-in dictionary objects.

--HG--
extra : convert_revision : db73b6cdd004a82a08b2402afd1e16544cb902a4
2006-09-05 22:04:34 -07:00
Steve Reinhardt
8bc3c2b192 Add FULL_SYSTEM check to example/fs.py.
--HG--
extra : convert_revision : 4cab46e73f29d2c9d24d9c0c847d598bf6d5c389
2006-08-29 14:36:35 -07:00
Steve Reinhardt
b0bf1e84e4 Add missing cpu mem param to example/se.py.
configs/example/se.py:
    Add missing cpu mem param.

--HG--
extra : convert_revision : 29a11b09524612f079b8998e99b8f5ee8c67c8a6
2006-08-29 14:14:29 -07:00
Kevin Lim
65741cd048 Updates to configs to support various sampling forms, truncated execution forms.
--HG--
extra : convert_revision : a6cf77f6c902e5f4f0a96206093d123eec2e0167
2006-08-24 18:01:07 -04:00
Steve Reinhardt
21b21c63b0 fs.py:
Add temporary cpu.mem parameter settings.

configs/example/fs.py:
    Add temporary cpu.mem parameter settings.

--HG--
extra : convert_revision : d7c2fcd8df8dc809b0511485877b2a85769aaf43
2006-08-21 12:31:59 -04:00
Steve Reinhardt
b83d0e5544 configs/example/fs.py:
Arg to m5.simulate() is a delta, not an absolute curTick value.
I didn't test this change, but I'm not convinced the previous
example was tested either, so I don't feel too badly about it.

configs/example/fs.py:
    Arg to m5.simulate() is a delta, not an absolute curTick value.
    I didn't test this change, but I'm not convinced the previous
    example was tested either, so I don't feel too badly about it.

--HG--
extra : convert_revision : ef7df7b83b3e2b5da02408c674169ccbed75a441
2006-08-20 19:28:58 -07:00
Lisa Hsu
a99534d429 Merge zizzer:/bk/newmem
into  zed.eecs.umich.edu:/z/hsul/work/m5/newmem

--HG--
extra : convert_revision : 382a9d4b420a9bdb35f93049306b7b7af0d33ad5
2006-08-17 00:02:38 -04:00
Lisa Hsu
a88a6758ce make tree rcS files reflect what we've been actually using in /dist.
also, update all the rcS files so that they are in sync with the new linux-dist build system.

configs/boot/devtime.rcS:
configs/boot/iscsi-client.rcS:
configs/boot/iscsi-server.rcS:
configs/boot/micro_memlat.rcS:
configs/boot/micro_stream.rcS:
configs/boot/micro_tlblat.rcS:
configs/boot/nat-netperf-maerts-client.rcS:
configs/boot/nat-netperf-server.rcS:
configs/boot/nat-netperf-stream-client.rcS:
configs/boot/nat-spec-surge-client.rcS:
configs/boot/nat-spec-surge-server.rcS:
configs/boot/natbox-netperf.rcS:
configs/boot/natbox-spec-surge.rcS:
configs/boot/netperf-rr.rcS:
configs/boot/netperf-server.rcS:
configs/boot/netperf-stream-client.rcS:
configs/boot/netperf-stream-nt-client.rcS:
configs/boot/nfs-client-nhfsstone.rcS:
configs/boot/nfs-client-tcp-smallb.rcS:
configs/boot/nfs-client-tcp.rcS:
configs/boot/nfs-client.rcS:
configs/boot/nfs-server-nhfsstone.rcS:
configs/boot/nfs-server.rcS:
configs/boot/ping-client.rcS:
configs/boot/ping-server.rcS:
configs/boot/spec-surge-client.rcS:
configs/boot/spec-surge-server.rcS:
configs/boot/surge-client.rcS:
configs/boot/surge-server.rcS:
    make tree rcS files reflect what we've been actually using in /dist.

--HG--
extra : convert_revision : 48fe4fe71938ef9d029e428028a271242c8d2faa
2006-08-17 00:00:27 -04:00
Ali Saidi
76ab1c466c add etherdump file option
--HG--
extra : convert_revision : 6b62398778208bc4e64582e06fb73b71a94f3014
2006-08-16 22:17:23 -04:00
Lisa Hsu
c475fd5211 Add in checkpointing in the frontend, so that when a checkpoint is called, the python handles it, and the simulation continues. Also, make it so that the cycle number is part of the cpt dir name, so that multiple checkpoints do not overwrite each other.
--HG--
extra : convert_revision : a55e4ac20da5a57ea8735951b9070960b9b8298f
2006-08-16 17:54:00 -04:00
Steve Reinhardt
bd4ccd6e39 Finish test clean-up & reorg.
configs/common/FSConfig.py:
    Add default Machine() param
configs/example/fs.py:
configs/example/se.py:
    make it work again
src/python/m5/objects/BaseCPU.py:
    Make mem PhysicalMemory so that a Parent.any proxy works well
src/sim/process.cc:
    Increase default stack size so we don't get an
    'increasing stack' message on 'hello world'
tests/SConscript:
    Add full list of current configs.
tests/configs/simple-atomic.py:
tests/configs/simple-timing.py:
    don't need SEConfig anymore
tests/quick/00.hello/test.py:
tests/quick/20.eio-short/test.py:
    fix
tests/run.py:
    move configs to separate dir

--HG--
rename : configs/test/fs.py => configs/example/fs.py
rename : configs/test/test.py => configs/example/se.py
rename : tests/simple-atomic.py => tests/configs/simple-atomic.py
rename : tests/simple-timing.py => tests/configs/simple-timing.py
rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini
rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out
rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console
rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt
rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr
rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout
rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini
rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out
rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console
rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt
rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr
rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout
rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini
rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out
rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console
rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt
rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr
rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout
rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello
rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello
extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16 14:42:44 -04:00
Steve Reinhardt
2552e68eb6 More restructuring of regression tests.
Moving work back to zizzer...

configs/common/FSConfig.py:
configs/test/fs.py:
    Move CPU connections out of makeLinuxAlphaSystem()
src/python/m5/objects/BaseCPU.py:
    Create default TLBs in full system.
    Move utility cache functions here.
src/python/m5/objects/O3CPU.py:
    Add _mem_ports
tests/run.py:
    Add binpath()
    Change maxtick default to 'forever'
tests/simple-atomic.py:
    Use connectmemPorts()
tests/simple-timing.py:
    Fix up.

--HG--
rename : tests/quick/eio1/ref/alpha/eio/detailed/config.ini => tests/quick/20.eio-short/ref/alpha/eio/detailed/config.ini
rename : tests/quick/eio1/ref/alpha/eio/detailed/config.out => tests/quick/20.eio-short/ref/alpha/eio/detailed/config.out
rename : tests/quick/eio1/ref/alpha/eio/detailed/m5stats.txt => tests/quick/20.eio-short/ref/alpha/eio/detailed/m5stats.txt
rename : tests/quick/eio1/ref/alpha/eio/detailed/stderr => tests/quick/20.eio-short/ref/alpha/eio/detailed/stderr
rename : tests/quick/eio1/ref/alpha/eio/detailed/stdout => tests/quick/20.eio-short/ref/alpha/eio/detailed/stdout
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/config.ini => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/config.ini
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/config.out => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/config.out
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/m5stats.txt => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/m5stats.txt
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/stderr => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/stderr
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/stdout => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/stdout
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/config.ini => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/config.ini
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/config.out => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/config.out
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/m5stats.txt => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/m5stats.txt
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/stderr => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/stderr
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/stdout => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/stdout
rename : tests/quick/eio1/test.py => tests/quick/20.eio-short/test.py
rename : configs/test/hello => tests/test-progs/hello/bin/alpha/linux/hello
rename : configs/test/hello_mips => tests/test-progs/hello/bin/mips/linux/hello_mips
rename : configs/test/sparc_tests/hello_sparc => tests/test-progs/hello/bin/sparc/bin
extra : convert_revision : 1f891392ecc11ffcc3b3182fa673c401c0efc8a5
2006-08-16 09:52:05 -07:00
Ali Saidi
de29f555c4 implement benchmark selection code
--HG--
extra : convert_revision : 84632fdad7019e177e61c56ae30ea2f3fdbc0995
2006-08-15 19:12:19 -04:00
Kevin Lim
de321175f2 Add in a bunch more stuff.
configs/boot/micro_memlat.rcS:
    Update these scripts so they work (not sure why they broke)
configs/boot/micro_tlblat.rcS:
    Update this script to use a different test.

--HG--
extra : convert_revision : 6e8692540a9fac6ae8f2d9975c70d4135354b849
2006-08-11 17:48:41 -04:00
Kevin Lim
08c0919b43 Clean up some more config stuff.
configs/common/FSConfig.py:
    Clean up some code to make functions look less like classes.  Also put makeList function (formerly listWrapper) into m5 itself.
configs/test/fs.py:
    Update for changed code.
src/python/m5/__init__.py:
    Put makeList into m5.

--HG--
extra : convert_revision : 731806a7486f9abf986f52926126df666b024b1d
2006-07-27 17:49:00 -04:00
Kevin Lim
f9729e999f Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge

--HG--
extra : convert_revision : 45650c90385b4e13e79ccf271a30bb55552b380f
2006-07-23 00:10:52 -04:00
Kevin Lim
6ef6e9b14d Fix up test.py
configs/test/test.py:
    Fix up this config.

--HG--
extra : convert_revision : e15071ee27b860cc3ad79277aa61f3e6bb7405d3
2006-07-23 00:10:11 -04:00
Gabe Black
c77cb31473 Reorganized SPARC binaries
--HG--
rename : configs/test/hello_sparc => configs/test/sparc_tests/hello_sparc
extra : convert_revision : d8f36fc9b346f0e89dc8406403576e88bb2dc139
2006-07-22 17:30:50 -04:00
Kevin Lim
7ccdb7accc Last minute check in. Very few functional changes other than some minor config updates. Also include some recently generated stats.
SConstruct:
    Make test CPUs option non-sticky.
configs/common/FSConfig.py:
    Be sure to set the memory mode.
configs/test/fs.py:
    Wrong string.
tests/SConscript:
    Only test valid CPUs that have been compiled in.
tests/test1/ref/alpha/atomic/config.ini:
tests/test1/ref/alpha/atomic/config.out:
tests/test1/ref/alpha/atomic/m5stats.txt:
tests/test1/ref/alpha/atomic/stdout:
tests/test1/ref/alpha/detailed/config.ini:
tests/test1/ref/alpha/detailed/config.out:
tests/test1/ref/alpha/detailed/m5stats.txt:
tests/test1/ref/alpha/detailed/stdout:
tests/test1/ref/alpha/timing/config.ini:
tests/test1/ref/alpha/timing/config.out:
tests/test1/ref/alpha/timing/m5stats.txt:
tests/test1/ref/alpha/timing/stdout:
    Update output.

--HG--
extra : convert_revision : 6eee2a5eae0291b5121b41bcd7021179cdd520a3
2006-07-22 15:50:39 -04:00
Kevin Lim
db5f710a7b Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge

configs/test/fs.py:
    Hand merge.

--HG--
extra : convert_revision : 78f7c46084f66d52ddfe0386fd7c08de8017331e
2006-07-21 16:08:17 -04:00
Kevin Lim
a6c2e5cca0 Rearrange the FS configs to be more shared. Also check in the full-system tests. Reference stats coming soon.
configs/test/fs.py:
    Pull out a lot of common code and put it into configs/common/FSConfig.py.

--HG--
extra : convert_revision : 175b18d75f82ddecbcc9a6418fe40df314db55d5
2006-07-21 15:56:35 -04:00
Kevin Lim
bd33d8d4ac Some reorganization. Options are all handled at the user level script. Move createCpus function (now called connectCpu) to Util.py, where it can be used by other configs.
--HG--
rename : configs/test/SysPaths.py => configs/common/SysPaths.py
extra : convert_revision : 2b1b95c5f29e7ade08b1abd6f24c129d600fe2e8
2006-07-21 15:42:44 -04:00
Ali Saidi
e8a3295075 Enforce the timing cpu ticking at it's clock rate
Add a max time option in seconds and a single system root clock be 1THz

configs/test/fs.py:
    Add a max time option in seconds and a single system root clock be 1THz
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
    Enforce the timing cpu ticking at it's clock rate

--HG--
extra : convert_revision : a1b0de27abde867f9c3da5bec11639e3d82a95f5
2006-07-20 19:00:40 -04:00
Kevin Lim
1fdf14dd5a Update configs.
configs/test/test.py:
    Update for changes to SEConfig.

--HG--
extra : convert_revision : a089a7db4035889db01d543d9a18ea6526f832ca
2006-07-19 15:24:22 -04:00
Kevin Lim
31ac8e7337 Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge

configs/test/fs.py:
configs/test/test.py:
    SCCS merged

--HG--
extra : convert_revision : 7b2dbcd5881fac01dec38001c4131e73b5be52b5
2006-07-14 17:54:43 -04:00
Ali Saidi
c368ff0bd8 add system.mem_mode = ['timing', 'atomic']
update scripts acordingly

configs/test/SysPaths.py:
    new syspaths from nate, this one allows you to set script, binary, and disk paths like
    system.dir = 'aouaou' in your script
configs/test/fs.py:
    update for system mem_mode
    Put small checkpoint example
    Make clock 1THz
configs/test/test.py:
src/arch/alpha/freebsd/system.cc:
src/arch/alpha/linux/system.cc:
src/arch/alpha/system.cc:
src/arch/alpha/tru64/system.cc:
src/arch/sparc/system.cc:
src/python/m5/objects/System.py:
src/sim/system.cc:
src/sim/system.hh:
    update for system mem_mode
src/dev/io_device.cc:
    Use time returned from sendAtomic to delay

--HG--
extra : convert_revision : 67eedb3c84ab2584613faf88a534e793926fc92f
2006-07-13 15:48:17 -04:00
Kevin Lim
6dfaf06edf Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge

configs/test/test.py:
    Hand merge.

--HG--
extra : convert_revision : e3fce9cf50a65a9400cd3ec887b13e4765274ec2
2006-07-12 17:21:25 -04:00
Kevin Lim
a9ca36639f Initial try of consolidating configuration files so they can be shared more easily, especially across regression tests and simple examples.
configs/test/fs.py:
    Pull a lot of the default options out of the config file now that they are in the Python objects themselves.  Also merge this file with the single_fs.py, allowing one file to be used for both.  Previously they differed only by the system they instantiated.
configs/test/test.py:
    Initial stab at consolidating configuration files so they aren't redundant between the regression tests and the simple examples.

--HG--
extra : convert_revision : e8ae3de5a6d8864831f21089d4fdb8ec690e4731
2006-07-12 17:17:17 -04:00
Nathan Binkert
55ea050d48 Migrate most of main() and and all option parsing to python
configs/test/fs.py:
configs/test/test.py:
    update for the new way that m5 deals with options
src/python/SConscript:
    Compile AUTHORS, LICENSE, README, and RELEASE_NOTES into the
    python stuff.
src/python/m5/__init__.py:
    redo the way options work.
    Move them all to main.py
src/sim/main.cc:
    Migrate more functionality for main() into python.
    Namely option parsing
src/python/m5/attrdict.py:
    A dictionary object that overrides attribute access to
    do item access.
src/python/m5/main.py:
    The new location for M5's option parsing, and the main()
    routine to set up the simulation.

--HG--
extra : convert_revision : c86b87a9f508bde1994088e23fd470c7753ee4c1
2006-07-10 23:00:13 -04:00
Ron Dreslinski
aef232a942 Update FS configs to use cpu connectors for ports
--HG--
extra : convert_revision : 1e2e503401f92c1f30e2e487d7aeed1c7c5b7ee4
2006-07-10 12:07:21 -04:00
Ron Dreslinski
ea11c7bdbe Update cpus to use the getPort function to use a connector object to connect the I/D cache ports to memory
configs/test/test.py:
    Update to use new cpu getPort functionality
src/cpu/base.cc:
    Make cpu's a memObject to expose getPort interface
src/cpu/base.hh:
    Make cpu's a memObject to export getPort interface
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
    Now use the connector via getPort interface
src/mem/cache/base_cache.cc:
    Make sure the cache recognizes all port names

--HG--
extra : convert_revision : dbfefa978ec755bc8aa6f962ae158acf32dafe61
2006-07-07 15:15:11 -04:00
Ali Saidi
93839380e7 Add default responder to bus
Update configuration for new default responder on bus
Update to devices to handle their own pci config space without pciconfigall
Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for
Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same
bus:dev:func and interrupt
Remove pciconfigspace from pci devices, and py files
Add calcConfigAddr that returns address for config space based on bus/dev/function + offset

configs/test/fs.py:
    Update configuration for new default responder on bus
src/dev/ide_ctrl.cc:
src/dev/ide_ctrl.hh:
src/dev/ns_gige.cc:
src/dev/ns_gige.hh:
src/dev/pcidev.cc:
src/dev/pcidev.hh:
    Update to handle it's own pci config space without pciconfigall
src/dev/io_device.cc:
src/dev/io_device.hh:
    change naming for pio port
    break out recvTiming into two functions to reuse code
src/dev/pciconfigall.cc:
src/dev/pciconfigall.hh:
    removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for
src/dev/pcireg.h:
    add a max size for PCI config space (per PCI spec)
src/dev/platform.cc:
src/dev/platform.hh:
    remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same
    bus:dev:func and interrupt
src/dev/sinic.cc:
    remove pciconfigspace as it's no longer a needed parameter
src/dev/tsunami.cc:
src/dev/tsunami.hh:
src/dev/tsunami_pchip.cc:
src/dev/tsunami_pchip.hh:
    add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec)
src/mem/bus.cc:
src/mem/bus.hh:
src/python/m5/objects/Bus.py:
    add idea of default responder to bus
src/python/m5/objects/Pci.py:
    add config port for pci devices
    add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec)

--HG--
extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 14:41:01 -04:00
Korey Sewell
19083bc4ce Added hook to check for SMT workloads. SMT is identified by adding a semicolon between
the workloads.

Now SMT on the O3CPU can be invoked by "/ALPHA_SE/m5.debug ../configs/test/test.py -d --cmd="hello;hello" -i="file1;file2"

I think I am a novice python magician now!!!!....

configs/test/test.py:
    Added hook to check for SMT workloads. SMT is identified by adding a semicolon between
    the workloads.

    Now SMT on the O3CPU can be invoked by "/ALPHA_SE/m5.debug ../configs/test/test.py -d --cmd="hello;hello" --input="file1;file2"
    (btw, We are back to working for this double hello world case)

    I am a novice python magician now!!!!....

--HG--
extra : convert_revision : b55e10dce33f5a9dc4c78f90409ec0912bad4292
2006-07-03 01:10:19 -04:00
Ali Saidi
88c9b17cb9 Add help strings for options
--HG--
extra : convert_revision : ebbafaf00c56a4d2ee65eea08a12d276f279135d
2006-06-27 14:58:46 -04:00
Ali Saidi
a23f15641e Merge zizzer:/bk/newmem
into  zeep.eecs.umich.edu:/z/saidi/work/m5.newmem

--HG--
extra : convert_revision : 39c99c8acadd43f3ec42ae7550289a5075d910e4
2006-06-26 17:50:58 -04:00
Ali Saidi
d80acd37bd add python options for input file and command line options for live process
--HG--
extra : convert_revision : 3db1e6d29846812378aa5174179a0686f0141580
2006-06-26 16:50:19 -04:00
Korey Sewell
ca25e70907 use 'tick' instead of 'cycle'
--HG--
extra : convert_revision : e7119d20ef95deab16081743c885979b0fa85548
2006-06-18 15:58:14 -04:00
Ali Saidi
69c34554e5 minor device fixups
configs/test/SysPaths.py:
    remove some tabs and add /n/poolfs/z/dist/m5/system
src/dev/io_device.cc:
    fix since pio timing dma packts colud be nacked too
src/dev/io_device.hh:
    move DmaReqState into DmaDevie

--HG--
extra : convert_revision : 2b5300d85ab33b3753afc54bc6a04a47b6e00d20
2006-06-18 11:10:08 -04:00
Nathan Binkert
78ea17ea30 Make the system paths more configurable
configs/test/SysPaths.py:
    Make the paths more configurable

--HG--
extra : convert_revision : c426b102dfe55e4b601a23e980e1b01140e0ee93
2006-06-17 18:14:16 -04:00
Steve Reinhardt
4a9c0a7dfc Add --outdir option. Didn't call it "-d" since
that's already being used for "detailed cpu".
Needed to add extra function for user script
to pass parsed options back to m5 module.

configs/test/fs.py:
configs/test/test.py:
    Call setStandardOptions().
src/python/m5/__init__.py:
    Add --outdir option.
    Add setStandardOptions() so user script can
    pass parsed options back to m5 module.
src/sim/main.cc:
    Add SWIG-wrappable function to set output dir.

--HG--
extra : convert_revision : 1323bee69ca920c699a1cd1218e15b7b0875c1e5
2006-06-17 09:58:10 -04:00
Kevin Lim
aa1efe3e72 Update this with the same option as single_fs.py
--HG--
extra : convert_revision : 778d654f515b6af7c45165b0a9bc5ef0d60f0d19
2006-06-16 18:04:34 -04:00
Kevin Lim
4e07f6ca52 Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge

--HG--
extra : convert_revision : 488b9a9965dd86ca73dc9e510e5b3122cbd357f9
2006-06-16 17:53:33 -04:00
Kevin Lim
baba18ab92 Two updates that got combined into one ChangeSet accidentally. They're both pretty simple so they shouldn't cause any trouble.
First: Rename FullCPU and its variants in the o3 directory to O3CPU to differentiate from the old model, and also to specify it's an out of order model.

Second: Include build options for selecting the Checker to be used.  These options make sure if the Checker is being used there is a CPU that supports it also being compiled.

SConstruct:
    Add in option USE_CHECKER to allow for not compiling in checker code.  The checker is enabled through this option instead of through the CPU_MODELS list.  However it's still necessary to treat the Checker like a CPU model, so it is appended onto the CPU_MODELS list if enabled.
configs/test/test.py:
    Name change for DetailedCPU to DetailedO3CPU.  Also include option for max tick.
src/base/traceflags.py:
    Add in O3CPU trace flag.
src/cpu/SConscript:
    Rename AlphaFullCPU to AlphaO3CPU.

    Only include checker sources if they're necessary.  Also add a list of CPUs that support the Checker, and only allow the Checker to be compiled in if one of those CPUs are also being included.
src/cpu/base_dyn_inst.cc:
src/cpu/base_dyn_inst.hh:
    Rename typedef to ImplCPU instead of FullCPU, to differentiate from the old FullCPU.
src/cpu/cpu_models.py:
src/cpu/o3/alpha_cpu.cc:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_builder.cc:
src/cpu/o3/alpha_cpu_impl.hh:
    Rename AlphaFullCPU to AlphaO3CPU to differentiate from old FullCPU model.
src/cpu/o3/alpha_dyn_inst.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/alpha_impl.hh:
src/cpu/o3/alpha_params.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/cpu.hh:
src/cpu/o3/decode.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/rename.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/rob.hh:
src/cpu/o3/rob_impl.hh:
src/cpu/o3/thread_state.hh:
src/python/m5/objects/AlphaO3CPU.py:
    Rename FullCPU to O3CPU to differentiate from old FullCPU model.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_unit_impl.hh:
    Rename FullCPU to O3CPU to differentiate from old FullCPU model.
    Also #ifdef the checker code so it doesn't need to be included if it's not selected.

--HG--
rename : src/cpu/checker/o3_cpu_builder.cc => src/cpu/checker/o3_builder.cc
rename : src/cpu/checker/cpu_builder.cc => src/cpu/checker/ozone_builder.cc
rename : src/python/m5/objects/AlphaFullCPU.py => src/python/m5/objects/AlphaO3CPU.py
extra : convert_revision : 86619baf257b8b7c8955efd447eba56e0d7acd6a
2006-06-16 17:08:47 -04:00
Steve Reinhardt
f06d508af0 Merge zizzer.eecs.umich.edu:/z/m5/Bitkeeper/newmem
into  zizzer.eecs.umich.edu:/z/stever/bk/newmem-head

--HG--
extra : convert_revision : 8a1cd7ff43aa4ebbfce0ff174d2f4ba3f095dd47
2006-06-15 11:46:13 -04:00
Steve Reinhardt
88e22ee081 Get Port stuff working with full-system scripts.
Key was adding support for cloning port references (trickier than it sounds).
Got rid of class/instance thing and go back to instance cloning...
still don't allow changing SimObject parameters/children after a
class (instance) has been subclassed or instantiated (or cloned), which
should avoid bizarre unintended behavior.

configs/test/fs.py:
    Add ".port" to busses to get a port reference.
    Get rid of commented-out code.
src/python/m5/__init__.py:
    resolveSimObject should call getCCObject() instead of createCCObject()
    to avoid cycles in recursively creating objects.
src/python/m5/config.py:
    Get rid of class/instance thing and go back to instance cloning.
    Deep copy has to happen only on instance cloning then (and not on subclassing).
    Add getCCObject() method to force creation of C++ SimObject without
    recursively creating its children.
    Add support for cloning port references (trickier than it sounds).
    Also clean up some very obsolete comments.
src/python/m5/objects/Bridge.py:
src/python/m5/objects/Device.py:
    Add ports.

--HG--
extra : convert_revision : 4816d05ead0de520748aace06dbd1911a33f0af8
2006-06-15 11:45:51 -04:00
Korey Sewell
1c55389578 tried to undo change and it didnt work so might as well put it back
--HG--
extra : convert_revision : 9793917e8a3e4d30f59ff469e4f08da96ce001f9
2006-06-14 22:01:36 -04:00
Korey Sewell
7b44630b95 change back, BK is acting up
--HG--
extra : convert_revision : 11fd5ebbca0408b357e9186d1b3722eb571e874e
2006-06-14 19:53:36 -04:00
Korey Sewell
7cd362ca4e add cycle to exit message
src/arch/mips/isa/formats/trap.isa:
    Take out fix that tried to fix trap
    instruction disassembly. It forces bad
    compile ..
configs/test/test.py:
    add 'cycle' to exit message

--HG--
extra : convert_revision : 568877797fd2806416b4cbb388cc3f7eb2492627
2006-06-14 19:45:15 -04:00
Steve Reinhardt
e981a97dec Move SimObject creation and Port connection loops
into Python.
Add Port and VectorPort objects and support for
specifying port connections via assignment.
The whole C++ ConfigNode hierarchy is gone now, as are
C++ Connector objects.

configs/test/fs.py:
configs/test/test.py:
    Rewrite for new port connector syntax.
src/SConscript:
    Remove unneeded files:
    - mem/connector.*
    - sim/config*
src/dev/io_device.hh:
src/mem/bridge.cc:
src/mem/bridge.hh:
src/mem/bus.cc:
src/mem/bus.hh:
src/mem/mem_object.hh:
src/mem/physical.cc:
src/mem/physical.hh:
    Allow getPort() to take an optional index to
    support vector ports (eventually).
src/python/m5/__init__.py:
    Move SimObject construction and port connection
    operations into Python (with C++ calls).
src/python/m5/config.py:
    Move SimObject construction and port connection
    operations into Python (with C++ calls).
    Add support for declaring and connecting MemObject
    ports in Python.
src/python/m5/objects/Bus.py:
src/python/m5/objects/PhysicalMemory.py:
    Add port declaration.
src/sim/builder.cc:
src/sim/builder.hh:
src/sim/serialize.cc:
src/sim/serialize.hh:
    ConfigNodes are gone; builder just gets the
    name of a .ini file section now.
src/sim/main.cc:
    Move SimObject construction and port connection
    operations into Python (with C++ calls).
    Split remaining initialization operations into two parts,
    loadIniFile() and finalInit().
src/sim/param.cc:
src/sim/param.hh:
    SimObject resolution done globally in Python now
    (not via ConfigNode hierarchy).
src/sim/sim_object.cc:
    Remove unneeded #include.

--HG--
extra : convert_revision : 2fa4001eaaec0c9a4231ef6e854f8e156d930dfe
2006-06-13 23:19:28 -04:00
Kevin Lim
72e4b98b8d Add in DetailedCPU to test.
--HG--
extra : convert_revision : 98c67b45af239e1cf5bad6888da6577a4c3bb45d
2006-06-13 14:15:24 -04:00
Steve Reinhardt
e0140202bd Move LiveProcess::create() from arch-specific files
bcak to main LiveProcess, then automatically select
ISA based on object file type.  Now simulation scripts
no longer need to care about the ISA, as they can just
call LiveProcess().

configs/test/test.py:
    Script no longer cares about ISA.
src/arch/alpha/process.cc:
src/arch/alpha/process.hh:
src/arch/mips/process.cc:
src/arch/mips/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/process.hh:
src/sim/process.cc:
src/sim/process.hh:
    Move create() from arch-specific files back to
    main LiveProcess, then automatically select ISA
    based on object file type.

--HG--
extra : convert_revision : ef33ffdc79623b77000f5d68edd2026760b76ab6
2006-06-11 21:49:46 -04:00
Steve Reinhardt
bb58e4b851 Don't allow SimObject-valued class params to be set
after the class has been instantiated or subclassed.
This is one of the main situations that leads to
confusing results.

configs/test/fs.py:
    Clean up to avoid modifying BaseCPU after it's been subclassed.

--HG--
extra : convert_revision : 335cb87bc3b211ecc8969cfb99ffc28f62f1f877
2006-06-10 21:13:36 -04:00
Steve Reinhardt
cd65504739 Update scripts for testing ALPHA_FS and MIPS_SE.
Minor fixes to ALPHA_FS and SPARC_SE.
SPARC_SE still does not compile... looks like there
are unresolved issues with ExecContext -> ThreadContext
rename/reorg.

configs/test/fs.py:
    Port to new script interface/model.
configs/test/test.py:
    Add support for running MIPS test(s) too via
    command-line option.
src/arch/alpha/ev5.cc:
    Fix include file.
src/arch/sparc/regfile.hh:
    Make Bit64 a ULL constant to avoid compiler error.

--HG--
extra : convert_revision : c46c179758271c4f00171faaa579915846bf4624
2006-06-10 00:22:42 -04:00
Steve Reinhardt
29e34a739b Move main control from C++ into Python.
User script now invokes initialization and
simulation loop after building configuration.
These functions are exported from C++ to Python
using SWIG.

SConstruct:
    Set up SWIG builder & scanner.
    Set up symlinking of source files into build directory
    (by not disabling the default behavior).
configs/test/test.py:
    Rewrite to use new script-driven interface.
    Include a sample option.
src/SConscript:
    Set up symlinking of source files into build directory
    (by not disabling the default behavior).
    Add SWIG-generated main_wrap.cc to source list.
src/arch/SConscript:
    Set up symlinking of source files into build directory
    (by not disabling the default behavior).
src/arch/alpha/ev5.cc:
src/arch/alpha/isa/decoder.isa:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/trace/opt_cpu.cc:
src/cpu/trace/trace_cpu.cc:
src/sim/pseudo_inst.cc:
src/sim/root.cc:
src/sim/serialize.cc:
src/sim/syscall_emul.cc:
    SimExit() is now exitSimLoop().
src/cpu/base.cc:
    SimExitEvent is now SimLoopExitEvent
src/python/SConscript:
    Add SWIG build command for main.i.
    Use python/m5 in build dir as source for zip archive...
    easy now with file duplication enabled.
src/python/m5/__init__.py:
    - Move copyright notice back to C++ so we can print
    it right away, even for interactive sessions.
    - Get rid of argument parsing code; just provide default
    option descriptors for user script to call optparse with.
    - Don't clutter m5 namespace by sucking in all of m5.config
    and m5.objects.
    - Move instantiate() function here from config.py.
src/python/m5/config.py:
    - Move instantiate() function to __init__.py.
    - Param.Foo deferred type lookups must use m5.objects
    namespace now (not m5).
src/python/m5/objects/AlphaConsole.py:
src/python/m5/objects/AlphaFullCPU.py:
src/python/m5/objects/AlphaTLB.py:
src/python/m5/objects/BadDevice.py:
src/python/m5/objects/BaseCPU.py:
src/python/m5/objects/BaseCache.py:
src/python/m5/objects/Bridge.py:
src/python/m5/objects/Bus.py:
src/python/m5/objects/CoherenceProtocol.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/DiskImage.py:
src/python/m5/objects/Ethernet.py:
src/python/m5/objects/Ide.py:
src/python/m5/objects/IntrControl.py:
src/python/m5/objects/MemObject.py:
src/python/m5/objects/MemTest.py:
src/python/m5/objects/Pci.py:
src/python/m5/objects/PhysicalMemory.py:
src/python/m5/objects/Platform.py:
src/python/m5/objects/Process.py:
src/python/m5/objects/Repl.py:
src/python/m5/objects/Root.py:
src/python/m5/objects/SimConsole.py:
src/python/m5/objects/SimpleDisk.py:
src/python/m5/objects/System.py:
src/python/m5/objects/Tsunami.py:
src/python/m5/objects/Uart.py:
    Fix up imports (m5 namespace no longer includes m5.config).
src/sim/eventq.cc:
src/sim/eventq.hh:
    Support for Python-called simulate() function:
    - Use IsExitEvent flag to signal events that want
    to exit the simulation loop gracefully (instead of
    calling exit() to terminate the process).
    - Modify interface to hand exit event object back to
    caller so it can be inspected for cause.
src/sim/host.hh:
    Add MaxTick constant.
src/sim/main.cc:
    Move copyright notice back to C++ so we can print
    it right away, even for interactive sessions.
    Use PYTHONPATH environment var to set module path
    (instead of clunky code injection method).
    Move main control from here into Python:
    - Separate initialization code and simulation loop
    into separate functions callable from Python.
    - Make Python interpreter invocation more pure (more
    like directly invoking interpreter).
    Add -i and -p flags (only options on binary itself;
    other options processed by Python).
    Import readline package when using interactive mode.
src/sim/sim_events.cc:
    SimExitEvent is now SimLoopExitEvent, and uses
    IsSimExit flag to terminate loop (instead of
    exiting simulator process).
src/sim/sim_events.hh:
    SimExitEvent is now SimLoopExitEvent, and uses
    IsSimExit flag to terminate loop (instead of
    exiting simulator process).
    Get rid of a few unused constructors.
src/sim/sim_exit.hh:
    SimExit() is now exitSimLoop().
    Get rid of unused functions.
    Add comments.

--HG--
extra : convert_revision : 280b0d671516b25545a6f24cefa64a68319ff3d4
2006-06-09 23:01:31 -04:00
Steve Reinhardt
935ba67b4f Get basic full-system working with AtomicSimpleCPU.
SConscript:
    Comment out sinic for now... needs to be fixed to compile under newmem.
configs/test/SysPaths.py:
    Fix paths.
configs/test/fs.py:
    SimpleCPU -> AtomicSimpleCPU
    Fix vmlinux path
cpu/simple/atomic.cc:
    Fix suspendContext() so quiesce works.
    Don't forget to checkForInterrupts().
cpu/simple/base.cc:
    Minor fix to interrupt check code.
dev/ide_disk.hh:
    Don't declare regStats() in header since it's not in
    .cc file anymore (will need to add it back in when
    stats are added back).
dev/io_device.cc:
    Set packet dest to Packet::Broadcast.
dev/pciconfigall.cc:
    Set PCI config packet result to Success.
python/m5/objects/Root.py:
    Add debug object to Root so things like break_cycles
    can be set from command line.

--HG--
extra : convert_revision : aa1c652fe589784e753e13ad9acb0cd5f3b6eafb
2006-05-17 22:08:44 -04:00
Steve Reinhardt
309e1d8193 Split SimpleCPU into two different models, AtomicSimpleCPU and
TimingSimpleCPU, which use atomic and timing memory accesses
respectively.  Common code is factored into the BaseSimpleCPU class.
AtomicSimpleCPU includes an option (simulate_stalls) to add delays
based on the estimated latency reported by the atomic accesses.
Plain old "SimpleCPU" is gone; I have not updated all the config
files (just test/test.py).
Also fixes to get timing accesses working in new memory model and
to get split-phase memory instruction definitions working with
new memory model as well.

arch/alpha/isa/main.isa:
    Need to include packet_impl.h for functions that use Packet objects.
arch/alpha/isa/mem.isa:
    Change completeAcc() methods to take Packet object pointers.
    Also split out StoreCond template for completeAcc(), since
    that's the only one that needs write_result and we get an
    unused variable warning if we always have it in there.
build/SConstruct:
    Update list of recognized CPU model names.
configs/test/test.py:
    Change SimpleCPU to AtomicSimpleCPU.
cpu/SConscript:
    Define sources for new CPU models.
    Add split memory access methods to CPU model signatures.
cpu/cpu_models.py:
cpu/static_inst.hh:
    Define new CPU models.
cpu/simple/base.cc:
cpu/simple/base.hh:
    Factor out pieces specific to Atomic or Timing models.
mem/bus.cc:
    Bus needs to be able to route timing packets based on explicit dest
    so responses can get back to requester.  Set dest to Packet::Broadcast
    to indicate that dest should be derived from address.
    Also set packet src field based on port from which packet is sent.
mem/bus.hh:
    Set packet src field based on port from which packet is sent.
mem/packet.hh:
    Define Broadcast destination address to indicate that
    packet should be routed based on address.
mem/physical.cc:
    Set packet dest on response so packet is routed
    back to requester properly.
mem/port.cc:
    Flag blob packets as Broadcast.
python/m5/objects/PhysicalMemory.py:
    Change default latency to be 1 cycle.

--HG--
rename : cpu/simple/cpu.cc => cpu/simple/base.cc
rename : cpu/simple/cpu.hh => cpu/simple/base.hh
extra : convert_revision : e9646af6406a20c8c605087936dc4683375c2132
2006-05-16 17:36:50 -04:00
Korey Sewell
0930024b88 Minor changes for FP ... MIPS now works for floating-point programs...
Now we are to the point where more benchmarks and instruction-coverage
is necessary to totally verify/validate correct operation across
all MIPS instructions

arch/mips/isa_traits.hh:
    fix for reading double values ... must rearrange bits before using void* to read double.
configs/test/hello_mips:
    real hello world MIPS binary

--HG--
extra : convert_revision : 153de1f8a830882c6972bd0bdb56da818f614def
2006-05-07 14:09:19 -04:00
Korey Sewell
de8eba6891 Merge zizzer:/bk/newmem
into  zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem

--HG--
extra : convert_revision : c48a8857f5a520ff8061eb3d8f08dcd43661e68c
2006-05-04 21:10:51 -04:00
Korey Sewell
97429d8eee Redo the FloatRegFile using unsigned integers
Edit the convert_and_round function which access FloatRegFile

arch/isa_parser.py:
    recognize when we are writing a 'uint64_t' FloatReg and set the width appropriately
arch/mips/isa/decoder.isa:
    Send a 'float' to the convert function instead of a unsigned word. Do this so we dont have to worry about the
    bit manipulation ourselves. We can just concern ourselves with values.

    Use unsigned double to get movd...
arch/mips/isa/formats/fp.isa:
    float debug statement
arch/mips/isa_traits.cc:
    add different versions of convert_and_round functions
arch/mips/isa_traits.hh:
    Use an array of uint32_t unsigned integers to represent the Floating Point Regfile
configs/test/hello_mips:
    basic FP program
cpu/simple/cpu.hh:
    spacing

--HG--
extra : convert_revision : a6fca91ad6365c83025f1131d71fa1b8ee76d7bc
2006-05-02 20:05:16 -04:00
Ali Saidi
ca8a659394 Merge zizzer:/bk/newmem
into  zeep.pool:/z/saidi/work/m5.newmem

--HG--
extra : convert_revision : d6f7c4dd146613eeba39249f2d916a77108bc8c1
2006-04-28 15:41:22 -04:00
Ali Saidi
79170b1be5 random mix of tidbits
configs/test/fs.py:
    update fs.py to use a bus bridge
cpu/simple/cpu.hh:
    cpu should just return that it doesn't snoop any address ranges
python/m5/objects/System.py:
    move boot_osflags to system

--HG--
extra : convert_revision : b4256df7eada7e65b69513361de8bffc3fdd680b
2006-04-28 15:40:45 -04:00
Gabe Black
20c8553787 Merge m5.eecs.umich.edu:/bk/newmem
into  ewok.(none):/home/gblack/m5/newmem

cpu/simple/cpu.cc:
    Hand merged

--HG--
extra : convert_revision : 68414730c23d41c30cfb7bcfa604029a5fc8622c
2006-04-28 14:03:42 -04:00
Gabe Black
25bf3125da Changed the hello_sparc executable back to the cross compiled one
--HG--
extra : convert_revision : 565f75f76dd26ca0e25de4c89d1597a9f39483fd
2006-04-28 13:11:32 -04:00
Ali Saidi
8f8d09538f Mostly done with all device models for new memory system. Still need to get timing packets working and get sinic working
after merge from head. Checkpointing may need some work now. Endian-happiness still not complete.

SConscript:
    add all devices back into make file
base/inet.hh:
dev/etherbus.cc:
dev/etherbus.hh:
dev/etherdump.cc:
dev/etherdump.hh:
dev/etherint.hh:
dev/etherlink.cc:
dev/etherlink.hh:
dev/etherpkt.cc:
dev/etherpkt.hh:
dev/ethertap.cc:
dev/ethertap.hh:
dev/pktfifo.cc:
dev/pktfifo.hh:
    rename PacketPtr EthPacketPtr so it doesn't conflict with the PacketPtr type in the memory system
configs/test/fs.py:
    add nics to fs.py
cpu/cpu_exec_context.cc:
    remove this check, as it's not valid. We may want to add something else back in to make sure that no one can delete the
    static virtual ports in the exec context
cpu/simple/cpu.cc:
cpu/simple/cpu.hh:
dev/alpha_console.cc:
dev/ide_ctrl.cc:
    use new methods for accessing packet data
dev/ide_disk.cc:
    add some more dprintfs
dev/io_device.cc:
    delete packets when we are done with them. Update for new packet methods to access data
dev/isa_fake.cc:
dev/pciconfigall.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart8250.cc:
dev/uart8250.hh:
mem/physical.cc:
mem/port.cc:
    dUpdate for new packet methods to access data
dev/ns_gige.cc:
    Update for new memory system
dev/ns_gige.hh:
python/m5/objects/Ethernet.py:
    update for new memory system
dev/sinic.cc:
dev/sinic.hh:
    Update for new memory system. Untested as need to merge in head because of kernel driver differences between versions
mem/packet.hh:
    Add methods to access data instead of accessing it directly.

--HG--
extra : convert_revision : 223f43876afd404e68337270cd9a5e44d0bf553e
2006-04-24 19:31:50 -04:00
Ali Saidi
6dc3b2fa39 make ide disk work for newmem
SConscript:
    compile ide devices
base/chunk_generator.hh:
    add another parameter to the chuck generator called complete() which
    returns the number of bytes transfered so far. Very useful for
    adding to a pointer.
configs/test/fs.py:
    Add ide disk to fs test configuration
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ide_disk.cc:
dev/ide_disk.hh:
dev/io_device.cc:
dev/io_device.hh:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/pcidev.cc:
dev/pcidev.hh:
    update for new memory system
mem/bus.cc:
    support devices that return multiple ranges
    remove old ranges before using new info
mem/packet.hh:
    make senderstate void* per steve's request that we use every
    construct possible in C++
mem/physical.cc:
    have memory stamp the packet with the time.
mem/physical.hh:
    actually set the memory latency variable
python/m5/objects/Device.py:
    Add DmaDevice
python/m5/objects/Ide.py:
    Ide disk no longer has a physmem pointer
python/m5/objects/Pci.py:
    update pci device for newmem
python/m5/objects/PhysicalMemory.py:
    add latency parameter for physical memory
sim/byteswap.hh:
    use fast architecture dependent byteswap calls if they exist

--HG--
extra : convert_revision : e3cf2e8f61064ad302d94bc22010a00c59f3f793
2006-04-20 17:14:30 -04:00
Korey Sewell
200205aa85 update Hello World binary for mips... the old one did not have a newline
--HG--
extra : convert_revision : f015cac39e42e11b1a56bbd1c5cf07403eb8f2da
2006-04-13 17:40:16 -04:00
Ali Saidi
81a735a716 fs now gets to the point where it would really like a filesystem.
Time to make the ide device work

arch/alpha/system.cc:
    write the machine type and rev in the correct place
cpu/simple/cpu.cc:
    reset the packet structure every time it's reused... wow the
    simple cpu code  for talking to memory is getting horrible.
dev/alpha_console.cc:
    move the setAlphaAccess to startup() to make sure that the console
    binary is loaded
dev/tsunami_cchip.cc:
dev/tsunami_pchip.cc:
dev/uart8250.cc:
    fix a couple of bugs injected in the newmem fixes
mem/bus.cc:
    More verbose bus tracing
mem/packet.hh:
    Add a constructor to packet to set the result to unknown and a reset
    method in the case it's being reused
mem/vport.hh:
    don't need are own read/write methods since the base functional port
    ones call writeBlob readBlob which do the translation for us

--HG--
extra : convert_revision : 8d0e2b782bfbf13dc5c59dab1a79a084d2a7da0a
2006-04-12 17:46:25 -04:00
Ali Saidi
6a7108897b a sparc binary that can be debugged
--HG--
extra : convert_revision : cb021c1e704b5771e0f86e794b7e59f8a4b96856
2006-04-06 18:32:10 -04:00
Gabe Black
6d8d6d15cd Fixed up the isa description. Also added some capability to the isa_parser in the InstObjParams constructor.
arch/isa_parser.py:
    Expanded the capability of the InstObjParams constructor to allow adding in extra keys for use in templates. These are added as key, value tuples as optional arguements.
arch/sparc/isa/base.isa:
arch/sparc/isa/formats/mem.isa:
arch/sparc/isa/formats/priv.isa:
    The genCompositeIop function is no longer needed, as this functionality is now in the InstObjParams constructor.
arch/sparc/isa/decoder.isa:
    Fixed up alot of instructions, and fixed indentation.
arch/sparc/isa/formats/integerop.isa:
    The genCompositeIop function is no longer needed, as this functionality is now in the InstObjParams constructor. Also changed the immediate values to be signed.
base/traceflags.py:
    Added SPARC traceflag
configs/test/hello_sparc:
    Recompiled without -mflat
cpu/cpu_exec_context.cc:
    Used the regfile clear function rather than memsetting to 0.

--HG--
extra : convert_revision : b9da6f264f3ebc4ce1815008dfff7f476b247ee9
2006-04-06 14:52:44 -04:00
Gabe Black
5c79eb0410 Fixes to SPARC for syscall emulation mode.
arch/sparc/isa/base.isa:
arch/sparc/isa/decoder.isa:
arch/sparc/isa/formats.isa:
arch/sparc/isa/formats/branch.isa:
arch/sparc/isa/formats/integerop.isa:
arch/sparc/isa/formats/mem.isa:
arch/sparc/isa/formats/nop.isa:
arch/sparc/isa/formats/trap.isa:
arch/sparc/isa/formats/unknown.isa:
arch/sparc/isa/includes.isa:
arch/sparc/isa/operands.isa:
    Fixes towards running in syscall emulation mode.
arch/sparc/linux/process.cc:
    Fixed the assert and comment to check that the Num_Syscall_Descs is less than or equal to 284. Why does this assert need to exist anyway?
base/loader/elf_object.cc:
    Cleared out comments about resolved issues.
cpu/simple/cpu.cc:
    Use NNPC for both SPARC and MIPS, instead of just MIPS
configs/test/hello_sparc:
    A test program for SPARC which prints "Hello World!"

--HG--
rename : arch/sparc/isa/formats/noop.isa => arch/sparc/isa/formats/nop.isa
extra : convert_revision : 10b3e3b9f21c215d809cffa930448007102ba698
2006-03-31 20:31:53 -05:00
Ali Saidi
3dcb589ea4 update for connector magic
--HG--
extra : convert_revision : 111af292373edebcd106938e76610f9ac4a6ce58
2006-03-29 17:39:20 -05:00
Ali Saidi
4973a16b34 update for objects having a bus
--HG--
extra : convert_revision : 96b5494b7d0b5ca702ac69cfa0bf8c4d44e1cc3b
2006-03-25 18:34:50 -05:00
Korey Sewell
77a2f97c35 Merge zizzer:/bk/newmem
into  zazzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-mips

--HG--
extra : convert_revision : 9bdde9b5bd3049744451eda1134f080b7c4b1b59
2006-03-15 23:38:55 -05:00