python type of a latency. In addition, the multiple definitions of profile in the different cpu models caused
problems for intialization of the interval value. If a child class's profile value was defined, the parent
BaseCPU::ProfileEvent interval field would be initialized with a garbage value. The fix was to remove the
multiple redifitions of profile in the child CPU classes.
A whole bunch of stuff has been converted to use the new params stuff, but
the CPU wasn't one of them. While we're at it, make some things a bit
more stylish. Most of the work was done by Gabe, I just cleaned stuff up
a bit more at the end.
When invoking several copies of m5 on the same machine at the same
time, there can be a race for TCP ports for the terminal connections
or remote gdb. Expose a function to disable those ports, and have the
regression scripts disable them. There are some SimObjects that have
no other function than to be used with ports (NativeTrace and
EtherTap), so they will panic if the ports are disabled.
The notIdleFraction statistic isn't updated when the statistics reset, probably because the cpu Status information
was pulled into the atomic and timing cpus. This changeset pulls Status back into the BaseSimpleCPU object. Anyone
care to comment on the odd naming of the Status instance? It shouldn't just be status because that is confusing
with Port::Status, but _status seems a bit strage too.
This should help if somebody gets to the bug
fix before me (or someone else)...
--HG--
extra : convert_revision : 0ae64c58ef4f7b02996f31e9e9e6bfad344719e2
from the right point (#32 usually) instead of restarting at 0 and double-freeing.
Commented out assert line in free_list.hh that will check for when double-free condition
goes bad.
--HG--
extra : convert_revision : 08d5f9b6a874736e487d101e85c22aaa67bf59ae
where we defer a response to a read from a far-away cache A, then later
defer a ReadExcl from a cache B on the same bus as us. We'll assert
MemInhibit in both cases, but in the latter case MemInhibit will keep
the invalidation from reaching cache A. This special response tells
cache A that it gets the block to satisfy its read, but must immediately
invalidate it.
--HG--
extra : convert_revision : f85c8b47bb30232da37ac861b50a6539dc81161b
Also some bug fixes in MIPS ISA uncovered by g++ warnings
(Python string compares don't work in C++!).
--HG--
extra : convert_revision : b347cc0108f23890e9b73b3ee96059f0cea96cf6
SimObjects not yet updated:
- Process and subclasses
- BaseCPU and subclasses
The SimObject(const std::string &name) constructor was removed. Subclasses
that still rely on that behavior must call the parent initializer as
: SimObject(makeParams(name))
--HG--
extra : convert_revision : d6faddde76e7c3361ebdbd0a7b372a40941c12ed
It should be cleared prior to the call to recvRetry.
Add extra DPRINTF statement for clearer debugging output.
--HG--
extra : convert_revision : e2332754743f42d60e159ac89f6fb0fd8b7f57f8
Ignore different values or rcx and r11 after a syscall until either the local or remote value changes. Also change the codes organization somewhat.
--HG--
extra : convert_revision : 2c1f69d4e55b443e68bfc7b43e8387b02cf0b6b5
People should never put pointers in DPRINTFs; it messes up
tracediffs. Plus these used the FullCPU trace flag, which
is not right.
--HG--
extra : convert_revision : 82ed56757da0ad947c165ba205b5f752c85c6667
The correct order is unintuitively rax, rcx, rdx, rbx, etc, not rax, rbx, rcx, rdx.
--HG--
extra : convert_revision : 3abe6a723a6e30becfe34f8da707ea2ff5d4df77
Code was assuming that all argument registers followed in order from ArgumentReg0. There is now an ArgumentReg array which is indexed to find the right index. There is a constant, NumArgumentRegs, which can be used to protect against using an invalid ArgumentReg.
--HG--
extra : convert_revision : f448a3ca4d6adc3fc3323562870f70eec05a8a1f
creation and initialization now happens in python. Parameter objects
are generated and initialized by python. The .ini file is now solely for
debugging purposes and is not used in construction of the objects in any
way.
--HG--
extra : convert_revision : 7e722873e417cb3d696f2e34c35ff488b7bff4ed
src/cpu/simple/timing.cc:
Fix another SC problem.
src/mem/cache/cache_impl.hh:
Forgot to call makeTimingResponse() on uncached timing responses.
--HG--
extra : convert_revision : 5a5a58ca2053e4e8de2133205bfd37de15eb4209
into vm1.(none):/home/stever/bk/newmem-cache2
src/base/traceflags.py:
Hand merge.
--HG--
extra : convert_revision : 9e7539eeab4220ed7a7237457a8f336f79216924
src/cpu/memtest/memtest.cc:
Need to set packet source field so that response from cache
doesn't run into assertion failure when copying source to dest.
src/mem/packet.hh:
Copy source field when copying packets.
Assert that source is valid before copying it to dest
when turning packets around.
--HG--
extra : convert_revision : 09e3cfda424aa89fe170e21e955b295746832bf8
into ahchoo.blinky.homelinux.org:/home/gblack/m5/newmem-o3-micro
src/cpu/o3/fetch_impl.hh:
hand merge
--HG--
extra : convert_revision : 3f71f3ac2035eec8b6f7bceb6906edb4dd09c045
supposed to and make sure parameters have the right type.
Also make sure that any object that should be an intermediate
type has the right options set.
--HG--
extra : convert_revision : d56910628d9a067699827adbc0a26ab629d11e93
into doughnut.hpl.hp.com:/home/gblack/newmem-o3-micro
src/cpu/base_dyn_inst_impl.hh:
src/cpu/o3/fetch_impl.hh:
Hand merge
--HG--
extra : convert_revision : 0c0692033ac30133672d8dfe1f1a27e9d9e95a3d
time it was responded to is curTick. Doesn't change the results, but it does make implementation of nextCycle() more difficult
--HG--
extra : convert_revision : 67ed6261a5451d17d96d5df45992590acc353afc
into vm1.(none):/home/stever/bk/newmem-cache2
configs/example/memtest.py:
Hand merge redundant changes.
--HG--
extra : convert_revision : a2e36be254bf052024f37bcb23b5209f367d37e1
timing mode still broken.
configs/example/memtest.py:
Revamp options.
src/cpu/memtest/memtest.cc:
No need for memory initialization.
No need to make atomic response... memory system should do that now.
src/cpu/memtest/memtest.hh:
MemTest really doesn't want to snoop.
src/mem/bridge.cc:
checkFunctional() cleanup.
src/mem/bus.cc:
src/mem/bus.hh:
src/mem/cache/base_cache.cc:
src/mem/cache/base_cache.hh:
src/mem/cache/cache.cc:
src/mem/cache/cache.hh:
src/mem/cache/cache_blk.hh:
src/mem/cache/cache_builder.cc:
src/mem/cache/cache_impl.hh:
src/mem/cache/coherence/coherence_protocol.cc:
src/mem/cache/coherence/coherence_protocol.hh:
src/mem/cache/coherence/simple_coherence.hh:
src/mem/cache/miss/SConscript:
src/mem/cache/miss/mshr.cc:
src/mem/cache/miss/mshr.hh:
src/mem/cache/miss/mshr_queue.cc:
src/mem/cache/miss/mshr_queue.hh:
src/mem/cache/prefetch/base_prefetcher.cc:
src/mem/cache/tags/fa_lru.cc:
src/mem/cache/tags/fa_lru.hh:
src/mem/cache/tags/iic.cc:
src/mem/cache/tags/iic.hh:
src/mem/cache/tags/lru.cc:
src/mem/cache/tags/lru.hh:
src/mem/cache/tags/split.cc:
src/mem/cache/tags/split.hh:
src/mem/cache/tags/split_lifo.cc:
src/mem/cache/tags/split_lifo.hh:
src/mem/cache/tags/split_lru.cc:
src/mem/cache/tags/split_lru.hh:
src/mem/packet.cc:
src/mem/packet.hh:
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/tport.cc:
More major reorg. Seems to work for atomic mode now,
timing mode still broken.
--HG--
extra : convert_revision : 7e70dfc4a752393b911880ff028271433855ae87
No need to initialize memory contents; should come up as 0.
src/cpu/memtest/memtest.cc:
No need to initialize memory contents; should come up as 0.
--HG--
extra : convert_revision : 1713676956f3d33b4686fee2650bd17027bcc495
Make code compatible with new decode method.
src/arch/alpha/remote_gdb.cc:
src/cpu/base_dyn_inst_impl.hh:
src/cpu/exetrace.cc:
src/cpu/simple/base.cc:
Make code compatible with new decode method.
src/cpu/static_inst.cc:
src/cpu/static_inst.hh:
Modified instruction decode method.
--HG--
extra : convert_revision : a9a6d3a16fff59bc95d0606ea344bd57e71b8d0a
src/arch/x86/predecoder.cc:
Seperate the pc-pc and the pc of the incoming bytes, and get rid of the "moreBytes" which just takes a MachInst. Also make the "opSize" field describe the number of bytes and not the log of the number of bytes.
--HG--
extra : convert_revision : 3a5ec7053ec69c5cba738a475d8b7fd9e6e6ccc0
src/arch/x86/isa/macroop.isa:
Make microOp vs microop and macroOp vs macroop capitilization consistent. Also fill out the emulation environment handling a little more, and use an object to pass around output code.
src/arch/x86/isa/microops/base.isa:
Make microOp vs microop and macroOp vs macroop capitilization consistent. Also adjust python to C++ bool translation.
--HG--
extra : convert_revision : 6f4bacfa334c42732c845f9a7f211cbefc73f96f
real thing. Also rename the null case to something that can
be a C++ symbol.
--HG--
extra : convert_revision : e3bfc4065b59c21f613e486d234711c48d7c9070
into ahchoo.blinky.homelinux.org:/home/gblack/m5/newmem-x86
src/cpu/simple/base.cc:
Hand merge
--HG--
extra : convert_revision : a2902ef9d917d22ffb9c7dfa2fd444694a65240d
Initialize a temporary variable for thread->readPC() at setupFetchRequest() to reduce function calls.
exec tracing isn't needed for m5.fast binaries
Moved MISCREG_GL, MISCREG_CWP, and MISCREG_TLB_DATA out of switch statement and use if blocks instead.
src/arch/sparc/miscregfile.cc:
Moved MISCREG_GL, MISCREG_CWP, and MISCREG_TLB_DATA out of switch statement and use if blocks instead.
src/cpu/simple/base.cc:
Assign traceData to be NULL at BaseSimpleCPU constructor.
Initialize a temporary variable for thread->readPC() at setupFetchRequest() to reduce function calls.
exec tracing isn't needed for m5.fast binaries
--HG--
extra : convert_revision : 5dc92fff05c9bde994f1e0f1bb40e11c44eb72c6
fix the timing cpu to handle receiving a nacked packet
src/cpu/simple/timing.cc:
make the timing cpu handle receiving a nacked packet
src/mem/bridge.cc:
src/mem/bridge.hh:
the bridge never returns false when recvTiming() is called on its ports now, it always returns true and nacks the packet if there isn't sufficient buffer space
--HG--
extra : convert_revision : 5e12d0cf6ce985a5f72bcb7ce26c83a76c34c50a
src/cpu/simple/base.cc:
Cpu's should start as unallocated, not suspended
src/cpu/simple_thread.cc:
Wait for a thread to be assigned to activate the cpu
src/kern/tru64/tru64.hh:
When looking for a open cpu to assign threads, look for an unallocated one, not a suspended one.
--HG--
extra : convert_revision : 5e3ad2e96b4a715ed38293ceaccff5b9f4ea7985
src/cpu/o3/alpha/cpu_impl.hh:
Pass ISA-specific O3 CPU to FullO3CPU as a constructor parameter instead of using setCPU functions.
--HG--
extra : convert_revision : 74f4b1f5fb6f95a56081f367cce7ff44acb5688a
The removed ones were unnecessary. The commented out ones could be useful in the future, should this problem get fixed. See flyspray task #243.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/o3/lsq_unit_impl.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/rob_impl.hh:
Remove/comment out DPRINTFs that were causing a segfault.
--HG--
extra : convert_revision : b5aeda1c6300dfde5e0a3e9b8c4c5f6fa00b9862
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
Update code so that the O3 CPU can handle not initially having anything hooked up to its ports.
--HG--
extra : convert_revision : 04bcef44e754735d821509ebd69b0ef9c8ef8e2c
into zamp.eecs.umich.edu:/z/ktlim2/clean/tmp/clean2
src/cpu/base_dyn_inst.hh:
Hand merge. Line is no longer needed because it's handled in the ISA.
--HG--
extra : convert_revision : 0be4067aa38759a5631c6940f0167d48fde2b680
1. Move interrupt handling to a separate function to clean up main commit() function a bit. Also gate the function call off properly based on whether or not there are outstanding interrupts, and the system is not in PAL mode.
2. Better handling of updating instruction's status bits. Instructions are not marked "atCommit" until other stages view it (pushed off to IEW/IQ), and they have been properly handled (faults).
3. Don't consider the ROB "empty" for the purpose of other stages until the ROB is empty, all stores have written back, and there was no store commits this cycle. The last is necessary in case a store committed, in which case it would look like all stores have written back but in actuality have not.
src/cpu/o3/commit.hh:
Slightly modify how interrupts are handled. Also include some extra bools to keep track of state properly.
src/cpu/o3/commit_impl.hh:
Slightly modify how interrupts are handled. Also include some extra bools to keep track of state.
General correctness updates, most specifically for when commit broadcasts to other stages that the ROB is empty.
--HG--
extra : convert_revision : 682ec6ccf4ee6ed0c8a030ceaba1c90a3619d102
src/cpu/o3/iew_impl.hh:
Allow for slightly more flexible handling of non-speculative instructions. They can be other classes now, such as loads or stores.
Also be sure to clear the state associated with squashes that are not used. i.e. if a squash due to a memory ordering violation happens on the same cycle as an older branch squashing, clear the state associated with the memory ordering violation.
Lastly don't consider uncached loads to officially be "at commit" until IEW receives the signal back from commit about the load.
src/cpu/o3/inst_queue_impl.hh:
Don't consider non-speculative instructions to be "at commit" until the IQ has received a signal from commit about the instruction. This prevents non-speculative instructions from being issued too early.
src/cpu/o3/mem_dep_unit_impl.hh:
Clear instruction's ability to issue if it's replayed.
--HG--
extra : convert_revision : d69dae878a30821222885485f4dee87170d56eb3
1. Requests are handled more properly now. They assume the memory system takes control of the request upon sending out an access.
2. load-load ordering is maintained.
src/cpu/base_dyn_inst.hh:
Update how requests are handled. The BaseDynInst should not be able to hold a pointer to the request because the request becomes owned by the memory system once it is sent out.
Also include some functions to allow certain status bits to be cleared.
src/cpu/base_dyn_inst_impl.hh:
Update how requests are handled. The BaseDynInst should not be able to hold a pointer to the request because the request becomes owned by the memory system once it is sent out.
src/cpu/o3/fetch_impl.hh:
General correctness fixes. retryPkt is not necessarily always set, so handle it properly. Also consider the cache unblocked only when recvRetry is called.
src/cpu/o3/lsq_unit.hh:
Handle requests a little more correctly. Now that the requests aren't pointed to by the DynInst, be sure to delete the request if it's not being used by the memory system.
Also be sure to not store-load forward from an uncacheable store.
src/cpu/o3/lsq_unit_impl.hh:
Check to make sure load-load ordering was maintained.
Also handle requests a little more correctly.
--HG--
extra : convert_revision : e86bead2886d02443cf77bf7a7a1492845e1690f
1. Set CPU ID in all modes for the O3 CPU.
2. Use nextCycle() function to prevent phase drift in O3 CPU.
3. Remove assertion in rename map that is no longer true.
src/cpu/o3/alpha/cpu_builder.cc:
Allow for CPU id in all modes, not just full system. Also include a parameter that was left out by accident.
src/cpu/o3/alpha/cpu_impl.hh:
Set the CPU ID properly.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
Use nextCycle() function so that the CPU does not get out of phase when starting up from quiesces.
src/cpu/o3/rename_map.cc:
Remove assertion that is no longer true.
tests/configs/o3-timing.py:
Set CPU's id to 0.
--HG--
extra : convert_revision : 2b69c19adfce2adcc2d1939e89d702bd6674d5d5
src/arch/alpha/predecoder.hh:
src/arch/sparc/predecoder.hh:
Put in a missing include
src/cpu/exetrace.cc:
Convert the legion lockstep stuff from makeExtMI to the predecoder object.
--HG--
extra : convert_revision : 91bad4466f8db1447fff8608fa46a5f236dc3a89
into ahchoo.blinky.homelinux.org:/home/gblack/m5/newmem-x86
src/arch/mips/utility.hh:
src/arch/x86/SConscript:
Hand merge
--HG--
extra : convert_revision : 0ba457aab52bf6ffc9191fd1fe1006ca7704b5b0
Removed the getOpcode function from StaticInst which only made sense for Alpha.
Started implementing the x86 predecoder.
--HG--
extra : convert_revision : a13ea257c8943ef25e9bc573024a99abacf4a70d
src/arch/sparc/ua2005.cc:
fix interrupting when quisced. Since sticks correspond to instructions when not quisced we need to
check if were suspended and interrupt at the guess time
src/base/traceflags.py:
add trace flag for Iob
src/cpu/simple/base.cc:
Use Quisce instead of IPI trace flag
src/dev/sparc/iob.cc:
add some Dprintfs
--HG--
extra : convert_revision : 72e18fcc750ad1e4b2bb67b19b354eaffc6af6d5
src/cpu/memtest/memtest.cc:
Add the [] to a delete to make it work correctly
src/mem/cache/cache_impl.hh:
Fix one of the memory leaks
--HG--
extra : convert_revision : 64c7465c68a084efe38a62419205518b24d852a7
automatic. The point is that now a subdirectory can be added
to the build process just by creating a SConscript file in it.
The process has two passes. On the first pass, all subdirs
of the root of the tree are searched for SConsopts files.
These files contain any command line options that ought to be
added for a particular subdirectory. On the second pass,
all subdirs of the src directory are searched for SConscript
files. These files describe how to build any given subdirectory.
I have added a Source() function. Any file (relative to the
directory in which the SConscript resides) passed to that
function is added to the build. Clean up everything to take
advantage of Source().
function is added to the list of files to be built.
--HG--
extra : convert_revision : 103f6b490d2eb224436688c89cdc015211c4fd30
1. Make sure connectMemPorts() only gets called when the CPU's peer gets changed. This is done by making setPeer() virtual, and overriding it in the CPU's ports. When it gets called on a CPU's port (dcache specifically), it calls the normal setPeer() function, and also connectMemPorts().
2. Consolidate redundant code that handles switching in a CPU.
src/cpu/base.cc:
Move common code of switching over peers to base CPU.
src/cpu/base.hh:
Move common code of switching over peers to BaseCPU.
src/cpu/o3/cpu.cc:
Add in function that updates thread context's ports.
Also use updated function to takeOverFrom() in BaseCPU. This gets rid of some repeated code.
src/cpu/o3/cpu.hh:
Include function to update thread context's memory ports.
src/cpu/o3/lsq.hh:
Add function to dcache port that will update the memory ports upon getting a new peer.
Also include a function that will tell the CPU to update those memory ports.
src/cpu/o3/lsq_impl.hh:
Add function that will update the memory ports upon getting a new peer.
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Add function that will update thread context's memory ports upon getting a new peer.
Also use the new BaseCPU's take over from function.
src/cpu/simple/atomic.hh:
Add in function (and dcache port) that will allow the dcache to update memory ports when it gets assigned a new peer.
src/cpu/simple/timing.hh:
Add function that will update thread context's memory ports upon getting a new peer.
src/mem/port.hh:
Make setPeer virtual so that other classes can override it.
--HG--
extra : convert_revision : 2050f1241dd2e83875d281cfc5ad5c6c8705fdaf
don't create a new physPort/virtPort every time activateContext() is called
add the ability to tell a memory object to delete it's reference to a port and a method to have a port call deletePortRefs()
on the port owner as well as delete it's peer
still need to stop calling connectMemoPorts() every time activateContext() is called or we'll overflow the bus id and panic
src/cpu/thread_state.cc:
if we hav ea (phys|virt)Port don't create a new on, have it delete it's peer and then reuse it
src/mem/bus.cc:
src/mem/bus.hh:
add ability to delete a port by usig a hash_map instead of an array to store port ids
add a function to do deleting
src/mem/cache/cache.hh:
src/mem/cache/cache_impl.hh:
src/mem/mem_object.cc:
src/mem/mem_object.hh:
adda function to delete port references from a memory object
src/mem/port.cc:
src/mem/port.hh:
add a removeConn function that tell the owener to delete any references to the port and then deletes its peer
--HG--
extra : convert_revision : 272f0c8f80e1cf1ab1750d8be5a6c9aa110b06a4
directly configured by python. Move stuff from root.(cc|hh) to
core.(cc|hh) since it really belogs there now.
In the process, simplify how ticks are used in the python code.
--HG--
extra : convert_revision : cf82ee1ea20f9343924f30bacc2a38d4edee8df3
configs/common/FSConfig.py:
Use binaries we've compiled instead of the ones that come with Legion
src/arch/alpha/interrupts.hh:
get rid of post(int int_type) and add a get_vec function that gets the interrupt vector for an interrupt number
src/arch/sparc/asi.cc:
Add AsiIsInterrupt() to AsiIsMmu()
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
Add InterruptVector type
src/arch/sparc/interrupts.hh:
rework interrupts. They are no longer cleared when created... A I/O or ASI read/write needs to happen before they are cleared
src/arch/sparc/isa_traits.hh:
Add the "interrupt" trap types to isa traits
src/arch/sparc/miscregfile.cc:
add names for all the misc registers and possible post an interrupt when TL is changed.
src/arch/sparc/miscregfile.hh:
Add a helper function to post an interrupt when pil < some set softint
src/arch/sparc/regfile.cc:
src/arch/sparc/regfile.hh:
InterruptLevel shouldn't really live here, moved to interrupt.hh
src/arch/sparc/tlb.cc:
Add interrupt ASIs to TLB
src/arch/sparc/ua2005.cc:
Add checkSoftInt to check if a softint needs to be posted
Check that a tickCompare isn't scheduled before scheduling one
Post and clear interrupts on queue writes and what not
src/base/bitfield.hh:
Add an helper function to return the msb that is set
src/cpu/base.cc:
src/cpu/base.hh:
get rid of post_interrupt(type) since it's no longer needed.. Add a way to see what interrupts are pending
src/cpu/intr_control.cc:
src/cpu/intr_control.hh:
src/dev/alpha/tsunami_cchip.cc:
src/python/m5/objects/IntrControl.py:
Make IntrControl have a system pointer rather than using a cpu pointer to get one
src/dev/sparc/SConscript:
add iob to SConsscrip
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.out:
tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.ini:
tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.out:
update config.ini/out for intrcntrl not having a cpu pointer anymore
--HG--
extra : convert_revision : 38614f6b9ffc8f3c93949a94ff04b7d2987168dd
on in python. Fix the trace start code so it actually starts
when it is suppsed to. Make the Exec tracing stuff obey the
trace enabled flag.
--HG--
extra : convert_revision : 634ba0b4f52345d4bf40d43e239cef7ef43e7691
the traceflags infrastructure. InstExec is now just Exec
and all of the command line options are now trace options.
--HG--
extra : convert_revision : 4adfa9dfbb32622d30ef4e63c06c7d87da793c8f
into zeep.pool:/z/saidi/work/m5.newmem
src/cpu/simple/atomic.cc:
merge steve's changes in.
--HG--
extra : convert_revision : a17eda37cd63c9380af6fe68b0aef4b1e1974231
Add support for a twin 64 bit int load
Add Memory barrier and write barrier flags as appropriate
Make atomic memory ops atomic
src/arch/alpha/isa/mem.isa:
src/arch/alpha/locked_mem.hh:
src/cpu/base_dyn_inst.hh:
src/mem/cache/cache_blk.hh:
src/mem/cache/cache_impl.hh:
rename store conditional stuff as extra data so it can be used for conditional swaps as well
src/arch/alpha/types.hh:
src/arch/mips/types.hh:
src/arch/sparc/types.hh:
add a largest read data type for statically allocating read buffers in atomic simple cpu
src/arch/isa_parser.py:
Add support for a twin 64 bit int load
src/arch/sparc/isa/decoder.isa:
Make atomic memory ops atomic
Add Memory barrier and write barrier flags as appropriate
src/arch/sparc/isa/formats/mem/basicmem.isa:
add post access code block and define a twinload format for twin loads
src/arch/sparc/isa/formats/mem/blockmem.isa:
remove old microcoded twin load coad
src/arch/sparc/isa/formats/mem/mem.isa:
swap.isa replaces the code in loadstore.isa
src/arch/sparc/isa/formats/mem/util.isa:
add a post access code block
src/arch/sparc/isa/includes.isa:
need bigint.hh for Twin64_t
src/arch/sparc/isa/operands.isa:
add a twin 64 int type
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
add support for twinloads
add support for swap and conditional swap instructions
rename store conditional stuff as extra data so it can be used for conditional swaps as well
src/mem/packet.cc:
src/mem/packet.hh:
Add support for atomic swap memory commands
src/mem/packet_access.hh:
Add endian conversion function for Twin64_t type
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/request.hh:
Add support for atomic swap memory commands
Rename sc code to extradata
--HG--
extra : convert_revision : 69d908512fb34a4e28b29a6e58b807fb1a6b1656
function into Alpha ISA description. write now just generically
returns a result value if the res pointer is non-null (which means
we can only provide a res pointer if we expect a valid result
value).
--HG--
extra : convert_revision : fb1c315515787f5fbbf7d1af7e428bdbfe8148b8
Created MemCmd class to wrap enum and provide handy methods to
check attributes, convert to string/int, etc.
--HG--
extra : convert_revision : 57f147ad893443e3a2040c6d5b4cdb1a8033930b
fix unaligned accesses in mmaped disk device
src/arch/sparc/isa/decoder.isa:
get (ld|st)fsr ops working right. In reality the fp enable check needs to go higher up in the emitted code
src/arch/sparc/isa/formats/basic.isa:
move the cexec into the aexec field
src/cpu/exetrace.cc:
copy the exception state from legion when we get it wrong. We aren't going to get it right without an fp emulation layer
src/dev/sparc/mm_disk.cc:
src/dev/sparc/mm_disk.hh:
fix unaligned accesses in the memory mapped disk device
--HG--
extra : convert_revision : aaa33096b08cf0563fe291d984a87493a117e528
src/arch/sparc/floatregfile.cc:
fix fp read/writing to registers... looking for suggestions on cleaner ways if anyone has them
src/arch/sparc/isa/decoder.isa:
fix some fp implementations
src/arch/sparc/isa/formats/basic.isa:
add new fp op class that 0 cexec in fsr and sets rounding mode for the up comming op
src/arch/sparc/isa/includes.isa:
include the appropriate header files for the rounding code
src/arch/sparc/miscregfile.cc:
print fsr out when it's read/written and the Sparc traceflgas in on
src/cpu/exetrace.cc:
fix printing of float registers
--HG--
extra : convert_revision : 49faab27f2e786a8455f9ca0f3f0132380c9d992
