src/cpu/o3/alpha/cpu_impl.hh:
Pass ISA-specific O3 CPU to FullO3CPU as a constructor parameter instead of using setCPU functions.
--HG--
extra : convert_revision : 74f4b1f5fb6f95a56081f367cce7ff44acb5688a
The removed ones were unnecessary. The commented out ones could be useful in the future, should this problem get fixed. See flyspray task #243.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/o3/lsq_unit_impl.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/rob_impl.hh:
Remove/comment out DPRINTFs that were causing a segfault.
--HG--
extra : convert_revision : b5aeda1c6300dfde5e0a3e9b8c4c5f6fa00b9862
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
Update code so that the O3 CPU can handle not initially having anything hooked up to its ports.
--HG--
extra : convert_revision : 04bcef44e754735d821509ebd69b0ef9c8ef8e2c
into zamp.eecs.umich.edu:/z/ktlim2/clean/tmp/clean2
src/cpu/base_dyn_inst.hh:
Hand merge. Line is no longer needed because it's handled in the ISA.
--HG--
extra : convert_revision : 0be4067aa38759a5631c6940f0167d48fde2b680
1. Move interrupt handling to a separate function to clean up main commit() function a bit. Also gate the function call off properly based on whether or not there are outstanding interrupts, and the system is not in PAL mode.
2. Better handling of updating instruction's status bits. Instructions are not marked "atCommit" until other stages view it (pushed off to IEW/IQ), and they have been properly handled (faults).
3. Don't consider the ROB "empty" for the purpose of other stages until the ROB is empty, all stores have written back, and there was no store commits this cycle. The last is necessary in case a store committed, in which case it would look like all stores have written back but in actuality have not.
src/cpu/o3/commit.hh:
Slightly modify how interrupts are handled. Also include some extra bools to keep track of state properly.
src/cpu/o3/commit_impl.hh:
Slightly modify how interrupts are handled. Also include some extra bools to keep track of state.
General correctness updates, most specifically for when commit broadcasts to other stages that the ROB is empty.
--HG--
extra : convert_revision : 682ec6ccf4ee6ed0c8a030ceaba1c90a3619d102
src/cpu/o3/iew_impl.hh:
Allow for slightly more flexible handling of non-speculative instructions. They can be other classes now, such as loads or stores.
Also be sure to clear the state associated with squashes that are not used. i.e. if a squash due to a memory ordering violation happens on the same cycle as an older branch squashing, clear the state associated with the memory ordering violation.
Lastly don't consider uncached loads to officially be "at commit" until IEW receives the signal back from commit about the load.
src/cpu/o3/inst_queue_impl.hh:
Don't consider non-speculative instructions to be "at commit" until the IQ has received a signal from commit about the instruction. This prevents non-speculative instructions from being issued too early.
src/cpu/o3/mem_dep_unit_impl.hh:
Clear instruction's ability to issue if it's replayed.
--HG--
extra : convert_revision : d69dae878a30821222885485f4dee87170d56eb3
1. Requests are handled more properly now. They assume the memory system takes control of the request upon sending out an access.
2. load-load ordering is maintained.
src/cpu/base_dyn_inst.hh:
Update how requests are handled. The BaseDynInst should not be able to hold a pointer to the request because the request becomes owned by the memory system once it is sent out.
Also include some functions to allow certain status bits to be cleared.
src/cpu/base_dyn_inst_impl.hh:
Update how requests are handled. The BaseDynInst should not be able to hold a pointer to the request because the request becomes owned by the memory system once it is sent out.
src/cpu/o3/fetch_impl.hh:
General correctness fixes. retryPkt is not necessarily always set, so handle it properly. Also consider the cache unblocked only when recvRetry is called.
src/cpu/o3/lsq_unit.hh:
Handle requests a little more correctly. Now that the requests aren't pointed to by the DynInst, be sure to delete the request if it's not being used by the memory system.
Also be sure to not store-load forward from an uncacheable store.
src/cpu/o3/lsq_unit_impl.hh:
Check to make sure load-load ordering was maintained.
Also handle requests a little more correctly.
--HG--
extra : convert_revision : e86bead2886d02443cf77bf7a7a1492845e1690f
1. Set CPU ID in all modes for the O3 CPU.
2. Use nextCycle() function to prevent phase drift in O3 CPU.
3. Remove assertion in rename map that is no longer true.
src/cpu/o3/alpha/cpu_builder.cc:
Allow for CPU id in all modes, not just full system. Also include a parameter that was left out by accident.
src/cpu/o3/alpha/cpu_impl.hh:
Set the CPU ID properly.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
Use nextCycle() function so that the CPU does not get out of phase when starting up from quiesces.
src/cpu/o3/rename_map.cc:
Remove assertion that is no longer true.
tests/configs/o3-timing.py:
Set CPU's id to 0.
--HG--
extra : convert_revision : 2b69c19adfce2adcc2d1939e89d702bd6674d5d5
src/arch/alpha/predecoder.hh:
src/arch/sparc/predecoder.hh:
Put in a missing include
src/cpu/exetrace.cc:
Convert the legion lockstep stuff from makeExtMI to the predecoder object.
--HG--
extra : convert_revision : 91bad4466f8db1447fff8608fa46a5f236dc3a89
into ahchoo.blinky.homelinux.org:/home/gblack/m5/newmem-x86
src/arch/mips/utility.hh:
src/arch/x86/SConscript:
Hand merge
--HG--
extra : convert_revision : 0ba457aab52bf6ffc9191fd1fe1006ca7704b5b0
Removed the getOpcode function from StaticInst which only made sense for Alpha.
Started implementing the x86 predecoder.
--HG--
extra : convert_revision : a13ea257c8943ef25e9bc573024a99abacf4a70d
src/arch/sparc/ua2005.cc:
fix interrupting when quisced. Since sticks correspond to instructions when not quisced we need to
check if were suspended and interrupt at the guess time
src/base/traceflags.py:
add trace flag for Iob
src/cpu/simple/base.cc:
Use Quisce instead of IPI trace flag
src/dev/sparc/iob.cc:
add some Dprintfs
--HG--
extra : convert_revision : 72e18fcc750ad1e4b2bb67b19b354eaffc6af6d5
src/cpu/memtest/memtest.cc:
Add the [] to a delete to make it work correctly
src/mem/cache/cache_impl.hh:
Fix one of the memory leaks
--HG--
extra : convert_revision : 64c7465c68a084efe38a62419205518b24d852a7
automatic. The point is that now a subdirectory can be added
to the build process just by creating a SConscript file in it.
The process has two passes. On the first pass, all subdirs
of the root of the tree are searched for SConsopts files.
These files contain any command line options that ought to be
added for a particular subdirectory. On the second pass,
all subdirs of the src directory are searched for SConscript
files. These files describe how to build any given subdirectory.
I have added a Source() function. Any file (relative to the
directory in which the SConscript resides) passed to that
function is added to the build. Clean up everything to take
advantage of Source().
function is added to the list of files to be built.
--HG--
extra : convert_revision : 103f6b490d2eb224436688c89cdc015211c4fd30
1. Make sure connectMemPorts() only gets called when the CPU's peer gets changed. This is done by making setPeer() virtual, and overriding it in the CPU's ports. When it gets called on a CPU's port (dcache specifically), it calls the normal setPeer() function, and also connectMemPorts().
2. Consolidate redundant code that handles switching in a CPU.
src/cpu/base.cc:
Move common code of switching over peers to base CPU.
src/cpu/base.hh:
Move common code of switching over peers to BaseCPU.
src/cpu/o3/cpu.cc:
Add in function that updates thread context's ports.
Also use updated function to takeOverFrom() in BaseCPU. This gets rid of some repeated code.
src/cpu/o3/cpu.hh:
Include function to update thread context's memory ports.
src/cpu/o3/lsq.hh:
Add function to dcache port that will update the memory ports upon getting a new peer.
Also include a function that will tell the CPU to update those memory ports.
src/cpu/o3/lsq_impl.hh:
Add function that will update the memory ports upon getting a new peer.
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Add function that will update thread context's memory ports upon getting a new peer.
Also use the new BaseCPU's take over from function.
src/cpu/simple/atomic.hh:
Add in function (and dcache port) that will allow the dcache to update memory ports when it gets assigned a new peer.
src/cpu/simple/timing.hh:
Add function that will update thread context's memory ports upon getting a new peer.
src/mem/port.hh:
Make setPeer virtual so that other classes can override it.
--HG--
extra : convert_revision : 2050f1241dd2e83875d281cfc5ad5c6c8705fdaf
don't create a new physPort/virtPort every time activateContext() is called
add the ability to tell a memory object to delete it's reference to a port and a method to have a port call deletePortRefs()
on the port owner as well as delete it's peer
still need to stop calling connectMemoPorts() every time activateContext() is called or we'll overflow the bus id and panic
src/cpu/thread_state.cc:
if we hav ea (phys|virt)Port don't create a new on, have it delete it's peer and then reuse it
src/mem/bus.cc:
src/mem/bus.hh:
add ability to delete a port by usig a hash_map instead of an array to store port ids
add a function to do deleting
src/mem/cache/cache.hh:
src/mem/cache/cache_impl.hh:
src/mem/mem_object.cc:
src/mem/mem_object.hh:
adda function to delete port references from a memory object
src/mem/port.cc:
src/mem/port.hh:
add a removeConn function that tell the owener to delete any references to the port and then deletes its peer
--HG--
extra : convert_revision : 272f0c8f80e1cf1ab1750d8be5a6c9aa110b06a4
directly configured by python. Move stuff from root.(cc|hh) to
core.(cc|hh) since it really belogs there now.
In the process, simplify how ticks are used in the python code.
--HG--
extra : convert_revision : cf82ee1ea20f9343924f30bacc2a38d4edee8df3
configs/common/FSConfig.py:
Use binaries we've compiled instead of the ones that come with Legion
src/arch/alpha/interrupts.hh:
get rid of post(int int_type) and add a get_vec function that gets the interrupt vector for an interrupt number
src/arch/sparc/asi.cc:
Add AsiIsInterrupt() to AsiIsMmu()
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
Add InterruptVector type
src/arch/sparc/interrupts.hh:
rework interrupts. They are no longer cleared when created... A I/O or ASI read/write needs to happen before they are cleared
src/arch/sparc/isa_traits.hh:
Add the "interrupt" trap types to isa traits
src/arch/sparc/miscregfile.cc:
add names for all the misc registers and possible post an interrupt when TL is changed.
src/arch/sparc/miscregfile.hh:
Add a helper function to post an interrupt when pil < some set softint
src/arch/sparc/regfile.cc:
src/arch/sparc/regfile.hh:
InterruptLevel shouldn't really live here, moved to interrupt.hh
src/arch/sparc/tlb.cc:
Add interrupt ASIs to TLB
src/arch/sparc/ua2005.cc:
Add checkSoftInt to check if a softint needs to be posted
Check that a tickCompare isn't scheduled before scheduling one
Post and clear interrupts on queue writes and what not
src/base/bitfield.hh:
Add an helper function to return the msb that is set
src/cpu/base.cc:
src/cpu/base.hh:
get rid of post_interrupt(type) since it's no longer needed.. Add a way to see what interrupts are pending
src/cpu/intr_control.cc:
src/cpu/intr_control.hh:
src/dev/alpha/tsunami_cchip.cc:
src/python/m5/objects/IntrControl.py:
Make IntrControl have a system pointer rather than using a cpu pointer to get one
src/dev/sparc/SConscript:
add iob to SConsscrip
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.out:
tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.ini:
tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.out:
update config.ini/out for intrcntrl not having a cpu pointer anymore
--HG--
extra : convert_revision : 38614f6b9ffc8f3c93949a94ff04b7d2987168dd
on in python. Fix the trace start code so it actually starts
when it is suppsed to. Make the Exec tracing stuff obey the
trace enabled flag.
--HG--
extra : convert_revision : 634ba0b4f52345d4bf40d43e239cef7ef43e7691
the traceflags infrastructure. InstExec is now just Exec
and all of the command line options are now trace options.
--HG--
extra : convert_revision : 4adfa9dfbb32622d30ef4e63c06c7d87da793c8f
into zeep.pool:/z/saidi/work/m5.newmem
src/cpu/simple/atomic.cc:
merge steve's changes in.
--HG--
extra : convert_revision : a17eda37cd63c9380af6fe68b0aef4b1e1974231
Add support for a twin 64 bit int load
Add Memory barrier and write barrier flags as appropriate
Make atomic memory ops atomic
src/arch/alpha/isa/mem.isa:
src/arch/alpha/locked_mem.hh:
src/cpu/base_dyn_inst.hh:
src/mem/cache/cache_blk.hh:
src/mem/cache/cache_impl.hh:
rename store conditional stuff as extra data so it can be used for conditional swaps as well
src/arch/alpha/types.hh:
src/arch/mips/types.hh:
src/arch/sparc/types.hh:
add a largest read data type for statically allocating read buffers in atomic simple cpu
src/arch/isa_parser.py:
Add support for a twin 64 bit int load
src/arch/sparc/isa/decoder.isa:
Make atomic memory ops atomic
Add Memory barrier and write barrier flags as appropriate
src/arch/sparc/isa/formats/mem/basicmem.isa:
add post access code block and define a twinload format for twin loads
src/arch/sparc/isa/formats/mem/blockmem.isa:
remove old microcoded twin load coad
src/arch/sparc/isa/formats/mem/mem.isa:
swap.isa replaces the code in loadstore.isa
src/arch/sparc/isa/formats/mem/util.isa:
add a post access code block
src/arch/sparc/isa/includes.isa:
need bigint.hh for Twin64_t
src/arch/sparc/isa/operands.isa:
add a twin 64 int type
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
add support for twinloads
add support for swap and conditional swap instructions
rename store conditional stuff as extra data so it can be used for conditional swaps as well
src/mem/packet.cc:
src/mem/packet.hh:
Add support for atomic swap memory commands
src/mem/packet_access.hh:
Add endian conversion function for Twin64_t type
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/request.hh:
Add support for atomic swap memory commands
Rename sc code to extradata
--HG--
extra : convert_revision : 69d908512fb34a4e28b29a6e58b807fb1a6b1656
function into Alpha ISA description. write now just generically
returns a result value if the res pointer is non-null (which means
we can only provide a res pointer if we expect a valid result
value).
--HG--
extra : convert_revision : fb1c315515787f5fbbf7d1af7e428bdbfe8148b8
Created MemCmd class to wrap enum and provide handy methods to
check attributes, convert to string/int, etc.
--HG--
extra : convert_revision : 57f147ad893443e3a2040c6d5b4cdb1a8033930b
fix unaligned accesses in mmaped disk device
src/arch/sparc/isa/decoder.isa:
get (ld|st)fsr ops working right. In reality the fp enable check needs to go higher up in the emitted code
src/arch/sparc/isa/formats/basic.isa:
move the cexec into the aexec field
src/cpu/exetrace.cc:
copy the exception state from legion when we get it wrong. We aren't going to get it right without an fp emulation layer
src/dev/sparc/mm_disk.cc:
src/dev/sparc/mm_disk.hh:
fix unaligned accesses in the memory mapped disk device
--HG--
extra : convert_revision : aaa33096b08cf0563fe291d984a87493a117e528
src/arch/sparc/floatregfile.cc:
fix fp read/writing to registers... looking for suggestions on cleaner ways if anyone has them
src/arch/sparc/isa/decoder.isa:
fix some fp implementations
src/arch/sparc/isa/formats/basic.isa:
add new fp op class that 0 cexec in fsr and sets rounding mode for the up comming op
src/arch/sparc/isa/includes.isa:
include the appropriate header files for the rounding code
src/arch/sparc/miscregfile.cc:
print fsr out when it's read/written and the Sparc traceflgas in on
src/cpu/exetrace.cc:
fix printing of float registers
--HG--
extra : convert_revision : 49faab27f2e786a8455f9ca0f3f0132380c9d992
src/arch/sparc/floatregfile.cc:
Fix serialization for fpreg
src/arch/sparc/intregfile.cc:
fix serialization for intreg
src/arch/sparc/miscregfile.cc:
fix serialization from miscreg
src/arch/sparc/pagetable.cc:
fix serialization for page table
src/arch/sparc/regfile.cc:
need to serialize nnpc
src/arch/sparc/tlb.cc:
write serialization code for tlb
src/cpu/base.cc:
provide a way to find the thread number a context is
serialize the instruction counter
src/cpu/base.hh:
provide a way to find the thread number a context is
and given a thread number find a context pointer
src/cpu/cpuevent.hh:
provide method to get thread context from a cpu event for serialization
src/dev/sparc/t1000.cc:
src/dev/sparc/t1000.hh:
nothing to serialize in t1000
src/sim/serialize.cc:
src/sim/serialize.hh:
Make findObj() work (it hasn't since we did the python conversion stuff)
--HG--
extra : convert_revision : a95bc4e3c3354304171efbe3797556fdb146bea2
make fp writes also chatty with the Sparc traceflag
src/arch/sparc/floatregfile.cc:
make fp writes also chatty with the Sparc traceflag
src/cpu/exetrace.cc:
fix comparing fp registers between legion and m5
--HG--
extra : convert_revision : f3703afae56249f137451262bc1b6919d465e714
SConstruct:
src/SConscript:
Add flags for Intel CC while i'm at it
src/base/compiler.hh:
the _Pragma stuff needst to be called this way unless someone happens to have a cleaner way
src/base/cprintf_formats.hh:
add std:: where appropriate
src/base/statistics.hh:
use this->map since icc was getting confused about std::map vs the locally defined map
src/cpu/static_inst.hh:
Add some more dummy returns where needed
src/mem/packet.hh:
add more dummy returns where needed
src/sim/host.hh:
use limits to come up with max tick
--HG--
extra : convert_revision : 08e9f7898b29fb9d063136529afb9b6abceab60c
into zower.eecs.umich.edu:/eecshome/m5/newmem
src/arch/sparc/isa/formats/mem/util.isa:
src/arch/sparc/isa_traits.hh:
src/arch/sparc/system.cc:
Hand Merge
--HG--
extra : convert_revision : d5e0c97caebb616493e2f642e915969d7028109c
some fixes to fp instructions to use the single precision registers
if this is an fp op emit fp check code
add fpregs to m5legion struct
src/arch/sparc/floatregfile.cc:
Make Sparc traceflag even more chatty
src/arch/sparc/isa/base.isa:
add code to check if the fpu is enabled
src/arch/sparc/isa/decoder.isa:
some fixes to fp instructions to use the single precision registers
fix smul again
fix subc/subcc/subccc condition code setting
src/arch/sparc/isa/formats/basic.isa:
src/arch/sparc/isa/formats/mem/util.isa:
if this is an fp op emit fp check code
src/cpu/exetrace.cc:
check fp regs as well as int regs
src/cpu/m5legion_interface.h:
add fpregs to m5legion struct
--HG--
extra : convert_revision : e7d26d10fb8ce88f96e3a51f84b48c3b3ad2f232
pretty close to compiling w/ suns compiler
briefly:
add dummy return after panic()/fatal()
split out flags by compiler vendor
include cstring and cmath where appropriate
use std namespace for string ops
SConstruct:
Add code to detect compiler and choose cflags based on detected compiler
Fix zlib check to work with suncc
src/SConscript:
split out flags by compiler vendor
src/arch/sparc/isa/decoder.isa:
use correct namespace for sqrt
src/arch/sparc/isa/formats/basic.isa:
add dummy return around panic
src/arch/sparc/isa/formats/integerop.isa:
use correct namespace for stringops
src/arch/sparc/isa/includes.isa:
include cstring and cmath where appropriate
src/arch/sparc/isa_traits.hh:
remove dangling comma
src/arch/sparc/system.cc:
dummy return to make sun cc front end happy
src/arch/sparc/tlb.cc:
src/base/compression/lzss_compression.cc:
use std namespace for string ops
src/arch/sparc/utility.hh:
no reason to say something is unsigned unsigned int
src/base/compression/null_compression.hh:
dummy returns to for suncc front end
src/base/cprintf.hh:
use standard variadic argument syntax instead of gnuc specefic renaming
src/base/hashmap.hh:
don't need to define hash for suncc
src/base/hostinfo.cc:
need stdio.h for sprintf
src/base/loader/object_file.cc:
munmap is in std namespace not null
src/base/misc.hh:
use M5 generic noreturn macros
use standard variadic macro __VA_ARGS__
src/base/pollevent.cc:
we need file.h for file flags
src/base/random.cc:
mess with include files to make suncc happy
src/base/remote_gdb.cc:
malloc memory for function instead of having a non-constant in an array size
src/base/statistics.hh:
use std namespace for floor
src/base/stats/text.cc:
include math.h for rint (cmath won't work)
src/base/time.cc:
use suncc version of ctime_r
src/base/time.hh:
change macro to work with both gcc and suncc
src/base/timebuf.hh:
include cstring from memset and use std::
src/base/trace.hh:
change variadic macros to be normal format
src/cpu/SConscript:
add dummy returns where appropriate
src/cpu/activity.cc:
include cstring for memset
src/cpu/exetrace.hh:
include cstring fro memcpy
src/cpu/simple/base.hh:
add dummy return for panic
src/dev/baddev.cc:
src/dev/pciconfigall.cc:
src/dev/platform.cc:
src/dev/sparc/t1000.cc:
add dummy return where appropriate
src/dev/ide_atareg.h:
make define work for both gnuc and suncc
src/dev/io_device.hh:
add dummy returns where approirate
src/dev/pcidev.hh:
src/mem/cache/cache_impl.hh:
src/mem/cache/miss/blocking_buffer.cc:
src/mem/cache/tags/lru.hh:
src/mem/cache/tags/split.hh:
src/mem/cache/tags/split_lifo.hh:
src/mem/cache/tags/split_lru.hh:
src/mem/dram.cc:
src/mem/packet.cc:
src/mem/port.cc:
include cstring for string ops
src/dev/sparc/mm_disk.cc:
add dummy return where appropriate
include cstring for string ops
src/mem/cache/miss/blocking_buffer.hh:
src/mem/port.hh:
Add dummy return where appropriate
src/mem/cache/tags/iic.cc:
cast hastSets to double for log() call
src/mem/physical.cc:
cast pmemAddr to char* for munmap
src/sim/byteswap.hh:
make define work for suncc and gnuc
--HG--
extra : convert_revision : ef8a1f1064e43b6c39838a85c01aee4f795497bd
Only allow writing/reading of 32 bits of Y
Only allow writing/reading 32 bits of pc when pstate.am
Put any loaded data on the first half of a micro-op in uReg0 so it can't
overwrite the register we are using for address calculation
only erase a entry from the lookup table if it's valid
Put in a temporary check to make sure that lookup table and tlb array stay in sync
if we are interrupted in the middle of a mico-op, reset the micropc/nexpc
so we start on the first part of it when we come back
src/arch/sparc/isa/decoder.isa:
fix smul and sdiv to sign extend, and handle overflow/underflow corretly
Only allow writing/reading of 32 bits of Y
Only allow writing/reading 32 bits of pc when pstate.am
Put any loaded data on the first half of a micro-op in uReg0 so it can't
overwrite the register we are using for address calculation
src/arch/sparc/isa/formats/mem/blockmem.isa:
Put any loaded data on the first half of a micro-op in uReg0 so it can't
overwrite the register we are using for address calculation
src/arch/sparc/isa/includes.isa:
Use limits for 32bit underflow/overflow detection
src/arch/sparc/tlb.cc:
only erase a entry from the lookup table if it's valid
Put in a temporary check to make sure that lookup table and tlb array stay in sync
src/arch/sparc/tlb_map.hh:
add a print function to dump the tlb lookup table
src/cpu/simple/base.cc:
if we are interrupted in the middle of a mico-op, reset the micropc/nexpc
so we start on the first part of it when we come back
--HG--
extra : convert_revision : 50a23837fd888393a5c2aa35cbd1abeebb7f55d4
check writability of tlb cache entry before using
update tagaccess in places I forgot to
move the tlb privileged test up since it is higher priority
src/arch/sparc/faults.cc:
save only 32 bits of PC/NPC if Pstate.am is set
src/arch/sparc/isa/decoder.isa:
return only 32 bits of PC/NPC if Pstate.am is set
increment cleanwin correctly
src/arch/sparc/tlb.cc:
check writability of cache entry
update tagaccess in a few more places
move the privileged test up since it is higher priority
src/cpu/exetrace.cc:
mask off upper bits of pc if pstate.am is set before comparing to legion
--HG--
extra : convert_revision : 02a51c141ee3f9a2600c28eac018ea7216f3655c
Increment instruction count on first micro-op instead of last
src/arch/sparc/isa/decoder.isa:
Implement a twin load for ASI_LDTX_P(0xe2)
src/arch/sparc/isa/formats/mem/blockmem.isa:
set the new flag IsFirstMicroOp when needed
src/cpu/simple/atomic.cc:
Increment instruction count on first micro-op instead of last (because if we take a fault on a micro coded instruction it should be counted twice acording to legion)
src/cpu/static_inst.hh:
Add IsFirstMicroop flag to static insts
--HG--
extra : convert_revision : 02bea93d38c03bbafe4570665eb4c01c11caa2fc
src/arch/sparc/interrupts.hh:
fill in how we do interrupts on sparc a little bit.
1) create a bitfield for interrupts, and check that in checkInterrupts() to fast path CPU.
2) fill in getInterrupts() a little bit.
also, update the bitfield access to be HPSTATE::hpriv, etc.
src/arch/sparc/ua2005.cc:
1) update formatting
2) change the way interrupts are done to use the new way to tickle the CPU.
src/cpu/base.cc:
src/cpu/base.hh:
overload the post_interrupt function for SPARC interrupts - which are only denoted by a single int value.
--HG--
extra : convert_revision : 9074a003eff37a40dcce78f56d20f6cbcc453eb5
at slightly different times interrupts are seen the cycle before they happen in m5 so the pc gets changed early.
--HG--
extra : convert_revision : f237363eababb2aad67e5b41670cf40be048a042
src/cpu/o3/commit_impl.hh:
Oops, changed the logic a little bit. Fix it up to how it used to be.
--HG--
extra : convert_revision : df7f69b0997207b611374c3c92880f3a405e88be
Only print faults instructions that aren't traps or faulting loads
src/cpu/exetrace.cc:
Compare the legion and m5 tlbs and printout any differences
Only show differences if the instruction isn't a trap and isn't a memory
operation that changes the trap level (a fault)
src/cpu/m5legion_interface.h:
update the m5<->legion interface to add tlb data
--HG--
extra : convert_revision : 6963b64ca1012604e6b1d3c5e0e5f5282fd0164e
Also don't call (*activeThreads).end() over and over. Just
call activeThreads->end() once and save the result.
Make sure we always check that there are elements in the list
before we grab the first one.
--HG--
extra : convert_revision : d769d8ed52da99532d57a9bbc93e92ddf22b7e58
bugfixes and demap implementation in tlb
ignore some more differencs for one cycle
src/arch/sparc/isa/formats/mem/blockmem.isa:
twinx has 2 micro-ops
src/arch/sparc/isa/formats/mem/util.isa:
fix the fault check for twinx
src/arch/sparc/tlb.cc:
tlb bugfixes and write demapping code
src/cpu/exetrace.cc:
don't halt on a couple more instruction (ldx, stx) when things differ
beacuse of the way tlb faults are handled in legion.
--HG--
extra : convert_revision : 1e156dead6ebd58b257213625ed63c3793ef4b71
InstObjParam interface.
src/arch/alpha/isa/branch.isa:
src/arch/alpha/isa/fp.isa:
src/arch/alpha/isa/int.isa:
src/arch/alpha/isa/main.isa:
src/arch/alpha/isa/mem.isa:
src/arch/alpha/isa/pal.isa:
src/arch/mips/isa/formats/mem.isa:
src/arch/mips/isa/formats/util.isa:
Get rid of CodeBlock calls to adapt to new InstObjParam interface.
src/arch/isa_parser.py:
Check template code for operands (in addition to snippets).
src/cpu/o3/alpha/dyn_inst.hh:
Add (read|write)MiscRegOperand calls to Alpha DynInst.
--HG--
extra : convert_revision : 332caf1bee19b014cb62c1ed9e793e793334c8ee
src/arch/isa_parser.py:
Rearranged things so that classes with more than one execute function treat operands properly.
1. Eliminated the CodeBlock class
2. Created a SubOperandList
3. Redefined how InstObjParams is constructed
To define an InstObjParam, you can either pass in a single code literal which will be named "code", or you can pass in a dictionary of code snippets which will be substituted into the Templates. In order to get this to work, there is a new restriction that each template has only one function in it. These changes should only affect memory instructions which have regular and split execute functions.
Also changed the MiscRegs so that they use the instrunctions srcReg and destReg arrays.
src/arch/sparc/isa/formats/basic.isa:
src/arch/sparc/isa/formats/branch.isa:
src/arch/sparc/isa/formats/integerop.isa:
src/arch/sparc/isa/formats/mem/basicmem.isa:
src/arch/sparc/isa/formats/mem/blockmem.isa:
src/arch/sparc/isa/formats/mem/util.isa:
src/arch/sparc/isa/formats/nop.isa:
src/arch/sparc/isa/formats/priv.isa:
src/arch/sparc/isa/formats/trap.isa:
Rearranged to work with new InstObjParam scheme.
src/cpu/o3/sparc/dyn_inst.hh:
Added functions to access the miscregs using the indexes from instructions srcReg and destReg arrays. Also changed the names of the other accessors so that they have the suffix "Operand" if they use those arrays.
src/cpu/simple/base.hh:
Added functions to access the miscregs using the indexes from instructions srcReg and destReg arrays.
--HG--
extra : convert_revision : c91e1073138b72bcf4113a721e0ed40ec600cf2e
RangeSize as a function takes a start address, and a SIZE, and will make the range (start, start+size-1) for you.
src/cpu/memtest/memtest.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/lsq.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/simple/atomic.hh:
src/cpu/simple/timing.hh:
Fix RangeSize arguments
src/dev/alpha/tsunami_cchip.cc:
src/dev/alpha/tsunami_io.cc:
src/dev/alpha/tsunami_pchip.cc:
src/dev/baddev.cc:
pioSize indicates SIZE, not a mask
--HG--
extra : convert_revision : d385521fcfe58f8dffc8622260937e668a47a948
exetrace.cc:
wrap this variable between FULL_SYSTEM #ifs
mmaped_ipr.hh:
fix for build
miscregfile.cc:
fixes for HPSTATE access during SE mode
src/arch/sparc/miscregfile.cc:
fixes for HPSTATE access during SE mode
src/arch/mips/mmaped_ipr.hh:
fix for build
src/cpu/exetrace.cc:
wrap this variable between FULL_SYSTEM #ifs
--HG--
extra : convert_revision : c5b9d56ab99018a91d04de47ba1d5ca7768590bb
Deal with block initializing stores (by doing nothing, at some point we might want to do the write hint 64 like thing)
Fix tcc instruction igoner in legion-lock stuff to be correct in all cases
Have console interrupts warn rather than panicing until we figure out what to do with interrupts
src/arch/sparc/miscregfile.cc:
src/arch/sparc/miscregfile.hh:
add a magic miscreg which reads all the bits the tlb needs in one go
src/arch/sparc/tlb.cc:
initialized the context type and id to reasonable values and handle block init stores
src/arch/sparc/tlb_map.hh:
fix bug in tlb map code
src/base/range_map.hh:
fix bug in rangemap code and add range_multimap
(these are probably useful for bus range stuff)
src/cpu/exetrace.cc:
fixup tcc ignore code to be correct
src/dev/sparc/t1000.cc:
make console interrupt stuff warn instead of panicing until we get interrupt stuff figured out
src/unittest/rangemaptest.cc:
fix up the rangemap unit test to catch the missing case
--HG--
extra : convert_revision : 70604a8b5d0553aa0b0bd7649f775a0cfa8267a5
This fixes a minor bug when multiple FU completions come back out of order (due to the order in which the FUs are freed up), and the oldest redirect isn't recorded properly. The eon benchmark should run now.
src/cpu/o3/iew_impl.hh:
Allow for multiple redirects to happen on a single cycle (only the one for the oldest instruction is passed on to commit).
--HG--
extra : convert_revision : b7d202dee1754539ed814f0fac59adb8c6328ee1
Fix fault formating and code for traps
fix a couple of bugs in the decoder
Cleanup/fix page table entry code
Implement more mmaped iprs, fix numbered tlb insertion code, add function to dump tlb contents
Don't panic if we differ from legion on a tcc instruction because of where legion prints its data and where we print our data
src/arch/sparc/faults.cc:
Fix fault formating and code for traps
src/arch/sparc/intregfile.hh:
allocate the correct number of global registers
src/arch/sparc/isa/decoder.isa:
fix a couple of bugs in the decoder: wrasi should write asi not ccr, done/retry should get hpstate from htstate
src/arch/sparc/pagetable.hh:
cleanup/fix page table code
src/arch/sparc/tlb.cc:
implement more mmaped iprs, fix numbered insertion code, add function to dump tlb contents
src/arch/sparc/tlb.hh:
add functions to write TagAccess register on tlb miss and to dump all tlb entries for debugging
src/cpu/exetrace.cc:
dump tlb entries on error, don't consider differences the cycle we take a trap to be bad.
--HG--
extra : convert_revision : d7d771900f6f25219f3dc6a6e51986d342a32e03
src/arch/sparc/asi.cc:
src/arch/sparc/asi.hh:
add sparc error asi
src/arch/sparc/faults.cc:
put a panic in if TL == MaxTL
src/arch/sparc/isa/decoder.isa:
Hpstate needs to be updated on a done too
src/arch/sparc/miscregfile.cc:
warn istead of panicing of fprs/fsr accesses
src/arch/sparc/tlb.cc:
add sparc error register code that just does nothing
fix a couple of other tlb bugs
src/arch/sparc/ua2005.cc:
fix implementation of HPSTATE write
src/cpu/exetrace.cc:
let exectrate mess up a couple of times before dying
src/python/m5/objects/T1000.py:
add l2 error status register fake devices
--HG--
extra : convert_revision : ed5dfdfb28633bf36e5ae07d244f7510a02874ca
src/cpu/o3/alpha/cpu.hh:
Got rid of some typedefs, and moved the tlbs to the base o3 cpu.
src/cpu/o3/alpha/thread_context.hh:
src/cpu/o3/cpu.cc:
Moved the tlbs to the base o3 cpu.
--HG--
extra : convert_revision : 1805613aa230b8974a226ee3d2584c85f7a578aa
into zower.eecs.umich.edu:/eecshome/m5/newmem
src/cpu/o3/commit_impl.hh:
Hand Merge
--HG--
extra : convert_revision : 6984db90d5b5ec71c31f1c345f5a77eed540059e
src/cpu/o3/thread_context_impl.hh:
Use flattened indices
src/cpu/simple_thread.hh:
Use flattened indices, and pass a thread context to setSyscallReturn rather than a register file.
src/cpu/thread_context.hh:
The SyscallReturn class is no longer in arch/syscallreturn.hh
--HG--
extra : convert_revision : ed84bb8ac5ef0774526ecd0d7270b0c60cd3708e
Protect other pieces of code so that sparc compiles SE again
src/arch/sparc/SConscript:
Add ua2005.cc back into SConscript
src/arch/sparc/miscregfile.hh:
add functions that deal with priv registers so we don't have to have a bunch of if defs and other ugliness
src/arch/sparc/mmaped_ipr.hh:
wrap handleIpr* with if full_system so it compiles under se
src/arch/sparc/ua2005.cc:
reorganize edit fs only miscreg functions
src/cpu/exetrace.cc:
protect legion code so it doesn't try to compile under se
--HG--
extra : convert_revision : 6b3c9f6f95b4da8544525f4f82e92861383ede76
configs/common/FSConfig.py:
seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
Use instruction count from cpu rather than cycles because that is what legion does
we can change it back after were done with legion
src/base/bitfield.hh:
add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
change asserts of packet success to if panics wrapped with NDEBUG defines
so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
convert some tabs to spaces
src/python/m5/objects/T1000.py:
add more fake devices for each l1 bank and each memory controller
--HG--
extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
into zower.eecs.umich.edu:/eecshome/m5/newmemmid
src/arch/sparc/isa_traits.hh:
src/arch/sparc/miscregfile.hh:
hand merge
--HG--
extra : convert_revision : 34f50dc5e6e22096cb2c08b5888f2b0fcd418f3e
src/arch/SConscript:
add mmaped_ipr.hh to switch headers
src/arch/sparc/asi.hh:
make ASI_IMPLICT=0 so by default nothing needs to be done
src/arch/sparc/miscregfile.hh:
miscregfile no longer needs to include asi.hh
src/arch/sparc/tlb.cc:
src/arch/sparc/tlb.hh:
implement panic instructions for mmaped ipr reads
src/cpu/simple/atomic.cc:
add check for mmaped iprs and handle them if it exists
src/mem/request.hh:
allocate space in the flags for mmaped iprs. Put in in the first 8 bits so that by default its fast. Move the other flags up 8 bits
--HG--
extra : convert_revision : 31255b0494588c4d06a727fe35241121d741b115
Right now this introduces a minor memory leak as old physPorts and virtPorts are not deleted when new ones are created. A flyspray task has been created for this issue. It can not be resolved until we determine how the bus will handle giving out ID's to functional ports that may be deleted.
src/cpu/o3/cpu.cc:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Change the setup of the physPort and virtPort to instead happen every time the CPU has a context activated. This is a little high overhead, but keeps it working correctly when the CPU does not have a physical memory attached to it until it switches in (like the case of switch CPUs).
src/cpu/o3/thread_context.hh:
Change function from being called at init() to just being called whenever the memory ports need to be connected.
src/cpu/o3/thread_context_impl.hh:
Update this to not delete the port if it's the same as the virtPort.
src/cpu/thread_context.hh:
Change function from being called at init() to whenever the memory ports need to be connected.
src/cpu/thread_state.cc:
Instead of initializing the ports, simply connect them, deleting any old ports that might exist. This allows these functions to be called multiple times.
src/cpu/thread_state.hh:
Ports are no longer initialized, but rather connected at context activation time.
--HG--
extra : convert_revision : e399ce5dfbd6ad658c953a7c9c7b69b89a70219e
src/arch/sparc/process.cc:
MachineBytes doesn't exist any more.
src/arch/sparc/regfile.cc:
Add in the miscRegFile for good measure.
src/cpu/o3/isa_specific.hh:
Add in a section for SPARC
src/cpu/o3/sparc/cpu.cc:
src/cpu/o3/sparc/cpu.hh:
src/cpu/o3/sparc/cpu_builder.cc:
src/cpu/o3/sparc/cpu_impl.hh:
src/cpu/o3/sparc/dyn_inst.cc:
src/cpu/o3/sparc/dyn_inst.hh:
src/cpu/o3/sparc/dyn_inst_impl.hh:
src/cpu/o3/sparc/impl.hh:
src/cpu/o3/sparc/params.hh:
src/cpu/o3/sparc/thread_context.cc:
src/cpu/o3/sparc/thread_context.hh:
Sparc version of this file.
--HG--
extra : convert_revision : 34bb5218f802d0a1328132a518cdd769fb59b6a4
src/cpu/o3/alpha/cpu_impl.hh:
Handle the PhysicalPort and VirtualPort in the ThreadState.
src/cpu/o3/cpu.cc:
Initialize the thread context.
src/cpu/o3/thread_context.hh:
Add new function to initialize thread context.
src/cpu/o3/thread_context_impl.hh:
Use code now put into function.
src/cpu/simple_thread.cc:
Move code to ThreadState and use the new helper function.
src/cpu/simple_thread.hh:
Remove init() in this derived class; use init() from ThreadState base class.
src/cpu/thread_state.cc:
Move setting up of Physical and Virtual ports here. Change getMemFuncPort() to connectToMemFunc(), which connects a port to a functional port of the memory object below the CPU.
src/cpu/thread_state.hh:
Update functions.
--HG--
extra : convert_revision : ff254715ef0b259dc80d08f13543b63e4024ca8d
configs/common/FSConfig.py:
Make a SPARC system create an IO bus.
src/python/m5/objects/T1000.py:
Create a T1000 platform
src/arch/sparc/miscregfile.cc:
Initialize the strand status register to the value legion provides.
src/cpu/exetrace.cc:
Truncate an ExtMachInst to a MachInst before comparing with Legion.
--HG--
extra : convert_revision : e4189b572a5297e8362f5bd26d87b74736c8e5f1
src/cpu/simple/timing.cc:
Various updates for deleting requests more properly.
The major change is moving the deletion of the fetch request/packet to after the instruction has executed and completed. This should fix a few bugs because Ron's memory system didn't expect a call for a functional access while a timing access was being processed.
--HG--
extra : convert_revision : c7cf114bb1ff3cdaa7b0a40ed4c5302dc9d3a522
src/cpu/o3/fetch_impl.hh:
Fetch needs to make sure it isn't waiting on an Icache access.
--HG--
extra : convert_revision : b53eb58b9e5a00bdb394134586d1f84f84d1c6e1
src/arch/alpha/interrupts.hh:
No need for this now that the ThreadContext is being used to set these IPRs in interrupts.
Also split up the interrupt checking from the updating of the IPL and interrupt summary.
src/arch/alpha/tlb.cc:
Check the PC for whether or not it's in PAL mode, not the addr.
src/cpu/o3/alpha/cpu.hh:
Split up getting the interrupt from actually processing the interrupt.
src/cpu/o3/alpha/cpu_impl.hh:
Splut up the processing of interrupts.
src/cpu/o3/commit_impl.hh:
Update for ISA-oriented interrupt changes.
src/cpu/o3/fetch_impl.hh:
Fix broken if statement from PcPAL updates, and properly populate the request fields.
Also more debugging output.
src/cpu/ozone/cpu_impl.hh:
Updates for ISA-oriented interrupt stuff.
src/cpu/ozone/front_end_impl.hh:
Populate request fields properly.
src/cpu/simple/base.cc:
Update for interrupt stuff.
--HG--
extra : convert_revision : 9bac3f9ffed4948ee788699b2fa8419bc1ca647c
src/arch/alpha/faults.hh:
Only use pagetable.hh in FS
src/arch/alpha/pagetable.hh:
pagetable.hh should only be included in FS, so protecting it internally should be unnecessary.
src/cpu/exetrace.cc:
Only use tlb.hh in FS
--HG--
extra : convert_revision : 91ea61f2e7970e7146b6d407ee250fcb20cd4d48
use memcpy instead of bcopy
s/u_int32_t/uint32_t/g
fixup endian code to work with solaris
hack to make sure htole() works... Nate, have a good idea to fix this?
src/arch/sparc/faults.cc:
set the reset address to be 40 bits. Makes PC printing easier at least for now.
src/arch/sparc/isa/base.isa:
fix endian issues with condition codes
src/arch/sparc/tlb.hh:
add implemented physical addres constants
src/arch/sparc/utility.hh:
add tlb.hh to utilities
src/base/loader/raw_object.cc:
add a symbol <filename>_start to the symbol table for binaries files
src/base/remote_gdb.cc:
use memcpy instead of bcopy
src/cpu/exetrace.cc:
clean up printing a bit more
src/cpu/m5legion_interface.h:
add tons to the shared interface
src/dev/ethertap.cc:
s/u_int32_t/uint32_t/g
src/dev/ide_atareg.h:
fixup endian code to work with solaris
src/dev/pcidev.cc:
src/sim/param.hh:
hack to make sure htole() works...
--HG--
extra : convert_revision : 4579392184b40bcc1062671a953c6595c685e9b2
Since we don't have a platform yet, you need to comment out the default responder stuff in Bus.py to make it work.
SConstruct:
Add TARGET_ISA to the list of environment variables that end up in the build_env for python
configs/common/FSConfig.py:
add a simple SPARC system to being testing with, you'll need to change makeLinuxAlphaSystem to makeSparcSystem in fs.py for now
src/SConscript:
add a raw file object, at least until we get more info about how to compile openboot properly
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
add parameters for ROM files (OBP/Reset/Hypervisor), a ROM, load files into ROM
src/base/loader/object_file.cc:
src/base/loader/object_file.hh:
add option to try raw when nothing works
src/cpu/exetrace.cc:
cleanup lockstep printing a little bit
src/cpu/m5legion_interface.h:
change the instruction to be 32 bits because it is
src/mem/physical.cc:
fix assert that doesn't work if memory starts somewhere above 0
src/python/m5/objects/BaseCPU.py:
Add if statement to choose between sparc tlbs and alpha tlbs
src/python/m5/objects/System.py:
Add a sparc system that sets the rom addresses correctly
src/python/m5/params.py:
add the ability to add Addr() together
--HG--
extra : convert_revision : bbbd8a56134f2dda2728091f740e2f7119b0c4af
src/cpu/o3/cpu.cc:
Handle draining properly when CPU isn't actually being used.
src/cpu/simple/atomic.cc:
Be sure to set status properly when draining.
src/mem/bus.cc:
Fix for draining.
--HG--
extra : convert_revision : d9796e6693e974f022159029fc9743c49a970c8f
src/cpu/o3/mem_dep_unit_impl.hh:
Initialize mem dep unit properly, add debug output.
--HG--
extra : convert_revision : 3c56dedfa57de1edc4b1c8f8d9bc94e18002eff2
src/cpu/base.cc:
Move clock phase drift code to the base CPU so that any CPU model can use it.
src/cpu/base.hh:
Added two functions to help get the next cycle the CPU should be scheduled.
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Use the function now in BaseCPU.
--HG--
extra : convert_revision : 444494b66ffc85fc473c23f57683c5f9458ad80c
SConstruct:
Add check to see if we need to include libsocket
src/arch/sparc/floatregfile.cc:
src/arch/sparc/intregfile.cc:
use memset rather than bzero and include the appropriate headerfile
src/base/pollevent.cc:
If we're compling under solaris we need sys/file.h
src/base/random.cc:
src/base/random.hh:
solaris doesn't have random(), so use rint with the correct rounding mode
if we're compiling on solaris
src/base/stats/flags.hh:
u_int32_t??
src/base/time.hh:
grab the timersub() define from freebsd since it doesn't exist in solaris
src/cpu/inst_seq.hh:
we don't need to include stdint here
src/sim/byteswap.hh:
the method to detect endianness on Solaris is a little more complex...
--HG--
extra : convert_revision : 6b7db0e900e7bccfc250d65c125065f27280dda1
src/cpu/simple_thread.cc:
Fix up port handling to share code.
src/cpu/thread_state.cc:
Separate code off into a function.
src/cpu/thread_state.hh:
Make a separate function that will get the CPU's memory's functional port.
--HG--
extra : convert_revision : 96a9bb3c5e4b9ba5511678c0fd17f0017c8cd312
src/cpu/simple_thread.cc:
This function should have been deleted from an earlier push.
src/cpu/simple_thread.hh:
Delete this function; it's now in thread_state.hh/.cc.
--HG--
extra : convert_revision : f78dcf9c2b388418030d48d0ea4911c8b8b1f5ff
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix
configs/example/fs.py:
configs/example/se.py:
src/mem/tport.hh:
Hand merge.
--HG--
extra : convert_revision : b9df95534d43b3b311f24ae24717371d03d615bf
configs/example/fs.py:
configs/example/se.py:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.cc:
src/cpu/thread_state.hh:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
No need for mem parameter any more.
src/cpu/checker/cpu.cc:
Use new constructor for simple thread (no more MemObject parameter).
src/cpu/checker/cpu.hh:
Remove MemObject parameter.
src/cpu/memtest/memtest.hh:
Ports now take in their MemObject owner.
src/cpu/o3/alpha/cpu_builder.cc:
Remove mem parameter.
src/cpu/o3/alpha/cpu_impl.hh:
Remove memory parameter and clean up handling of TranslatingPort.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/params.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/atomic.cc:
Remove memory parameter.
--HG--
extra : convert_revision : 43cb44a33b31320d44b69679dcf646c0380d07d3
src/cpu/simple/atomic.hh:
Port now takes in the MemObject that owns it.
src/cpu/simple/timing.hh:
Port now takes in MemObject that owns it.
src/dev/io_device.cc:
src/mem/bus.hh:
Ports now take in the MemObject that owns it.
src/mem/cache/base_cache.cc:
Ports now take in the MemObject that own it.
src/mem/port.hh:
src/mem/tport.hh:
Ports now optionally take in the MemObject that owns it.
--HG--
extra : convert_revision : 890a72a871795987c2236c65937e06973412d349
src/cpu/simple/base.cc:
Make a microcoded op start at the current micropc, rather than starting at 0.
src/cpu/thread_state.cc:
Serialize the microPC and nextMicroPC
--HG--
extra : convert_revision : 5302215f17312ecef3ff4c6548acb05297ee4ff6
src/cpu/base_dyn_inst.hh:
Extend BaseDynInst a little bit so it can be use as a TC as well (specifically for ll/sc code).
src/cpu/base_dyn_inst_impl.hh:
Add variable to track if the result of the instruction should be recorded.
src/cpu/o3/alpha/cpu_impl.hh:
Clear lock flag upon hwrei.
src/cpu/o3/lsq_unit.hh:
Use ISA specified handling of locked reads.
src/cpu/o3/lsq_unit_impl.hh:
Use ISA specified handling of locked writes.
--HG--
extra : convert_revision : 1f5c789c35deb4b016573c02af4aab60d726c0e5
Fix fixPacket assert function.
Stop timing port from forwarding the request if a response was found in its queue on a read.
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/python/m5/objects/MemTest.py:
Add parameter to configure what percentage of mem accesses are functional
src/mem/cache/base_cache.cc:
src/mem/cache/cache_impl.hh:
Use fix Packet function
src/mem/packet.cc:
Fix an assert that was checking the wrong thing
src/mem/tport.cc:
Properly detect if we need to do the access to the functional device
--HG--
extra : convert_revision : 447cc1a9a65ddd2a41e937fb09dc0e7c74e9c75e
src/cpu/memtest/memtest.cc:
Fix memtest to do functional accesses
src/mem/cache/cache_impl.hh:
Fix cache to handle functional accesses properly based on memtester changes
Still need to fix functional accesses in timing mode now that the memtester can test it.
--HG--
extra : convert_revision : a6dbca4dc23763ca13560fbf5d41a23ddf021113
?? doesn't compile in warn statements
Should have been false, where I had a true.
src/cpu/o3/lsq_impl.hh:
Apparently you can't have ?? in a warn statement (Something about trigraphs)
src/mem/cache/cache_impl.hh:
Forgot to signal atomic mode in snoopProbe
--HG--
extra : convert_revision : c75cb76e193e852284564993440c8ea39e6de426
