Only allow writing/reading of 32 bits of Y
Only allow writing/reading 32 bits of pc when pstate.am
Put any loaded data on the first half of a micro-op in uReg0 so it can't
overwrite the register we are using for address calculation
only erase a entry from the lookup table if it's valid
Put in a temporary check to make sure that lookup table and tlb array stay in sync
if we are interrupted in the middle of a mico-op, reset the micropc/nexpc
so we start on the first part of it when we come back
src/arch/sparc/isa/decoder.isa:
fix smul and sdiv to sign extend, and handle overflow/underflow corretly
Only allow writing/reading of 32 bits of Y
Only allow writing/reading 32 bits of pc when pstate.am
Put any loaded data on the first half of a micro-op in uReg0 so it can't
overwrite the register we are using for address calculation
src/arch/sparc/isa/formats/mem/blockmem.isa:
Put any loaded data on the first half of a micro-op in uReg0 so it can't
overwrite the register we are using for address calculation
src/arch/sparc/isa/includes.isa:
Use limits for 32bit underflow/overflow detection
src/arch/sparc/tlb.cc:
only erase a entry from the lookup table if it's valid
Put in a temporary check to make sure that lookup table and tlb array stay in sync
src/arch/sparc/tlb_map.hh:
add a print function to dump the tlb lookup table
src/cpu/simple/base.cc:
if we are interrupted in the middle of a mico-op, reset the micropc/nexpc
so we start on the first part of it when we come back
--HG--
extra : convert_revision : 50a23837fd888393a5c2aa35cbd1abeebb7f55d4
check writability of tlb cache entry before using
update tagaccess in places I forgot to
move the tlb privileged test up since it is higher priority
src/arch/sparc/faults.cc:
save only 32 bits of PC/NPC if Pstate.am is set
src/arch/sparc/isa/decoder.isa:
return only 32 bits of PC/NPC if Pstate.am is set
increment cleanwin correctly
src/arch/sparc/tlb.cc:
check writability of cache entry
update tagaccess in a few more places
move the privileged test up since it is higher priority
src/cpu/exetrace.cc:
mask off upper bits of pc if pstate.am is set before comparing to legion
--HG--
extra : convert_revision : 02a51c141ee3f9a2600c28eac018ea7216f3655c
Increment instruction count on first micro-op instead of last
src/arch/sparc/isa/decoder.isa:
Implement a twin load for ASI_LDTX_P(0xe2)
src/arch/sparc/isa/formats/mem/blockmem.isa:
set the new flag IsFirstMicroOp when needed
src/cpu/simple/atomic.cc:
Increment instruction count on first micro-op instead of last (because if we take a fault on a micro coded instruction it should be counted twice acording to legion)
src/cpu/static_inst.hh:
Add IsFirstMicroop flag to static insts
--HG--
extra : convert_revision : 02bea93d38c03bbafe4570665eb4c01c11caa2fc
src/arch/sparc/interrupts.hh:
fill in how we do interrupts on sparc a little bit.
1) create a bitfield for interrupts, and check that in checkInterrupts() to fast path CPU.
2) fill in getInterrupts() a little bit.
also, update the bitfield access to be HPSTATE::hpriv, etc.
src/arch/sparc/ua2005.cc:
1) update formatting
2) change the way interrupts are done to use the new way to tickle the CPU.
src/cpu/base.cc:
src/cpu/base.hh:
overload the post_interrupt function for SPARC interrupts - which are only denoted by a single int value.
--HG--
extra : convert_revision : 9074a003eff37a40dcce78f56d20f6cbcc453eb5
at slightly different times interrupts are seen the cycle before they happen in m5 so the pc gets changed early.
--HG--
extra : convert_revision : f237363eababb2aad67e5b41670cf40be048a042
src/cpu/o3/commit_impl.hh:
Oops, changed the logic a little bit. Fix it up to how it used to be.
--HG--
extra : convert_revision : df7f69b0997207b611374c3c92880f3a405e88be
Only print faults instructions that aren't traps or faulting loads
src/cpu/exetrace.cc:
Compare the legion and m5 tlbs and printout any differences
Only show differences if the instruction isn't a trap and isn't a memory
operation that changes the trap level (a fault)
src/cpu/m5legion_interface.h:
update the m5<->legion interface to add tlb data
--HG--
extra : convert_revision : 6963b64ca1012604e6b1d3c5e0e5f5282fd0164e
Also don't call (*activeThreads).end() over and over. Just
call activeThreads->end() once and save the result.
Make sure we always check that there are elements in the list
before we grab the first one.
--HG--
extra : convert_revision : d769d8ed52da99532d57a9bbc93e92ddf22b7e58
bugfixes and demap implementation in tlb
ignore some more differencs for one cycle
src/arch/sparc/isa/formats/mem/blockmem.isa:
twinx has 2 micro-ops
src/arch/sparc/isa/formats/mem/util.isa:
fix the fault check for twinx
src/arch/sparc/tlb.cc:
tlb bugfixes and write demapping code
src/cpu/exetrace.cc:
don't halt on a couple more instruction (ldx, stx) when things differ
beacuse of the way tlb faults are handled in legion.
--HG--
extra : convert_revision : 1e156dead6ebd58b257213625ed63c3793ef4b71
InstObjParam interface.
src/arch/alpha/isa/branch.isa:
src/arch/alpha/isa/fp.isa:
src/arch/alpha/isa/int.isa:
src/arch/alpha/isa/main.isa:
src/arch/alpha/isa/mem.isa:
src/arch/alpha/isa/pal.isa:
src/arch/mips/isa/formats/mem.isa:
src/arch/mips/isa/formats/util.isa:
Get rid of CodeBlock calls to adapt to new InstObjParam interface.
src/arch/isa_parser.py:
Check template code for operands (in addition to snippets).
src/cpu/o3/alpha/dyn_inst.hh:
Add (read|write)MiscRegOperand calls to Alpha DynInst.
--HG--
extra : convert_revision : 332caf1bee19b014cb62c1ed9e793e793334c8ee
src/arch/isa_parser.py:
Rearranged things so that classes with more than one execute function treat operands properly.
1. Eliminated the CodeBlock class
2. Created a SubOperandList
3. Redefined how InstObjParams is constructed
To define an InstObjParam, you can either pass in a single code literal which will be named "code", or you can pass in a dictionary of code snippets which will be substituted into the Templates. In order to get this to work, there is a new restriction that each template has only one function in it. These changes should only affect memory instructions which have regular and split execute functions.
Also changed the MiscRegs so that they use the instrunctions srcReg and destReg arrays.
src/arch/sparc/isa/formats/basic.isa:
src/arch/sparc/isa/formats/branch.isa:
src/arch/sparc/isa/formats/integerop.isa:
src/arch/sparc/isa/formats/mem/basicmem.isa:
src/arch/sparc/isa/formats/mem/blockmem.isa:
src/arch/sparc/isa/formats/mem/util.isa:
src/arch/sparc/isa/formats/nop.isa:
src/arch/sparc/isa/formats/priv.isa:
src/arch/sparc/isa/formats/trap.isa:
Rearranged to work with new InstObjParam scheme.
src/cpu/o3/sparc/dyn_inst.hh:
Added functions to access the miscregs using the indexes from instructions srcReg and destReg arrays. Also changed the names of the other accessors so that they have the suffix "Operand" if they use those arrays.
src/cpu/simple/base.hh:
Added functions to access the miscregs using the indexes from instructions srcReg and destReg arrays.
--HG--
extra : convert_revision : c91e1073138b72bcf4113a721e0ed40ec600cf2e
RangeSize as a function takes a start address, and a SIZE, and will make the range (start, start+size-1) for you.
src/cpu/memtest/memtest.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/lsq.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/simple/atomic.hh:
src/cpu/simple/timing.hh:
Fix RangeSize arguments
src/dev/alpha/tsunami_cchip.cc:
src/dev/alpha/tsunami_io.cc:
src/dev/alpha/tsunami_pchip.cc:
src/dev/baddev.cc:
pioSize indicates SIZE, not a mask
--HG--
extra : convert_revision : d385521fcfe58f8dffc8622260937e668a47a948
exetrace.cc:
wrap this variable between FULL_SYSTEM #ifs
mmaped_ipr.hh:
fix for build
miscregfile.cc:
fixes for HPSTATE access during SE mode
src/arch/sparc/miscregfile.cc:
fixes for HPSTATE access during SE mode
src/arch/mips/mmaped_ipr.hh:
fix for build
src/cpu/exetrace.cc:
wrap this variable between FULL_SYSTEM #ifs
--HG--
extra : convert_revision : c5b9d56ab99018a91d04de47ba1d5ca7768590bb
Deal with block initializing stores (by doing nothing, at some point we might want to do the write hint 64 like thing)
Fix tcc instruction igoner in legion-lock stuff to be correct in all cases
Have console interrupts warn rather than panicing until we figure out what to do with interrupts
src/arch/sparc/miscregfile.cc:
src/arch/sparc/miscregfile.hh:
add a magic miscreg which reads all the bits the tlb needs in one go
src/arch/sparc/tlb.cc:
initialized the context type and id to reasonable values and handle block init stores
src/arch/sparc/tlb_map.hh:
fix bug in tlb map code
src/base/range_map.hh:
fix bug in rangemap code and add range_multimap
(these are probably useful for bus range stuff)
src/cpu/exetrace.cc:
fixup tcc ignore code to be correct
src/dev/sparc/t1000.cc:
make console interrupt stuff warn instead of panicing until we get interrupt stuff figured out
src/unittest/rangemaptest.cc:
fix up the rangemap unit test to catch the missing case
--HG--
extra : convert_revision : 70604a8b5d0553aa0b0bd7649f775a0cfa8267a5
This fixes a minor bug when multiple FU completions come back out of order (due to the order in which the FUs are freed up), and the oldest redirect isn't recorded properly. The eon benchmark should run now.
src/cpu/o3/iew_impl.hh:
Allow for multiple redirects to happen on a single cycle (only the one for the oldest instruction is passed on to commit).
--HG--
extra : convert_revision : b7d202dee1754539ed814f0fac59adb8c6328ee1
Fix fault formating and code for traps
fix a couple of bugs in the decoder
Cleanup/fix page table entry code
Implement more mmaped iprs, fix numbered tlb insertion code, add function to dump tlb contents
Don't panic if we differ from legion on a tcc instruction because of where legion prints its data and where we print our data
src/arch/sparc/faults.cc:
Fix fault formating and code for traps
src/arch/sparc/intregfile.hh:
allocate the correct number of global registers
src/arch/sparc/isa/decoder.isa:
fix a couple of bugs in the decoder: wrasi should write asi not ccr, done/retry should get hpstate from htstate
src/arch/sparc/pagetable.hh:
cleanup/fix page table code
src/arch/sparc/tlb.cc:
implement more mmaped iprs, fix numbered insertion code, add function to dump tlb contents
src/arch/sparc/tlb.hh:
add functions to write TagAccess register on tlb miss and to dump all tlb entries for debugging
src/cpu/exetrace.cc:
dump tlb entries on error, don't consider differences the cycle we take a trap to be bad.
--HG--
extra : convert_revision : d7d771900f6f25219f3dc6a6e51986d342a32e03
src/arch/sparc/asi.cc:
src/arch/sparc/asi.hh:
add sparc error asi
src/arch/sparc/faults.cc:
put a panic in if TL == MaxTL
src/arch/sparc/isa/decoder.isa:
Hpstate needs to be updated on a done too
src/arch/sparc/miscregfile.cc:
warn istead of panicing of fprs/fsr accesses
src/arch/sparc/tlb.cc:
add sparc error register code that just does nothing
fix a couple of other tlb bugs
src/arch/sparc/ua2005.cc:
fix implementation of HPSTATE write
src/cpu/exetrace.cc:
let exectrate mess up a couple of times before dying
src/python/m5/objects/T1000.py:
add l2 error status register fake devices
--HG--
extra : convert_revision : ed5dfdfb28633bf36e5ae07d244f7510a02874ca
src/cpu/o3/alpha/cpu.hh:
Got rid of some typedefs, and moved the tlbs to the base o3 cpu.
src/cpu/o3/alpha/thread_context.hh:
src/cpu/o3/cpu.cc:
Moved the tlbs to the base o3 cpu.
--HG--
extra : convert_revision : 1805613aa230b8974a226ee3d2584c85f7a578aa
into zower.eecs.umich.edu:/eecshome/m5/newmem
src/cpu/o3/commit_impl.hh:
Hand Merge
--HG--
extra : convert_revision : 6984db90d5b5ec71c31f1c345f5a77eed540059e
src/cpu/o3/thread_context_impl.hh:
Use flattened indices
src/cpu/simple_thread.hh:
Use flattened indices, and pass a thread context to setSyscallReturn rather than a register file.
src/cpu/thread_context.hh:
The SyscallReturn class is no longer in arch/syscallreturn.hh
--HG--
extra : convert_revision : ed84bb8ac5ef0774526ecd0d7270b0c60cd3708e
Protect other pieces of code so that sparc compiles SE again
src/arch/sparc/SConscript:
Add ua2005.cc back into SConscript
src/arch/sparc/miscregfile.hh:
add functions that deal with priv registers so we don't have to have a bunch of if defs and other ugliness
src/arch/sparc/mmaped_ipr.hh:
wrap handleIpr* with if full_system so it compiles under se
src/arch/sparc/ua2005.cc:
reorganize edit fs only miscreg functions
src/cpu/exetrace.cc:
protect legion code so it doesn't try to compile under se
--HG--
extra : convert_revision : 6b3c9f6f95b4da8544525f4f82e92861383ede76
configs/common/FSConfig.py:
seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
Use instruction count from cpu rather than cycles because that is what legion does
we can change it back after were done with legion
src/base/bitfield.hh:
add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
change asserts of packet success to if panics wrapped with NDEBUG defines
so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
convert some tabs to spaces
src/python/m5/objects/T1000.py:
add more fake devices for each l1 bank and each memory controller
--HG--
extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
into zower.eecs.umich.edu:/eecshome/m5/newmemmid
src/arch/sparc/isa_traits.hh:
src/arch/sparc/miscregfile.hh:
hand merge
--HG--
extra : convert_revision : 34f50dc5e6e22096cb2c08b5888f2b0fcd418f3e
src/arch/SConscript:
add mmaped_ipr.hh to switch headers
src/arch/sparc/asi.hh:
make ASI_IMPLICT=0 so by default nothing needs to be done
src/arch/sparc/miscregfile.hh:
miscregfile no longer needs to include asi.hh
src/arch/sparc/tlb.cc:
src/arch/sparc/tlb.hh:
implement panic instructions for mmaped ipr reads
src/cpu/simple/atomic.cc:
add check for mmaped iprs and handle them if it exists
src/mem/request.hh:
allocate space in the flags for mmaped iprs. Put in in the first 8 bits so that by default its fast. Move the other flags up 8 bits
--HG--
extra : convert_revision : 31255b0494588c4d06a727fe35241121d741b115
Right now this introduces a minor memory leak as old physPorts and virtPorts are not deleted when new ones are created. A flyspray task has been created for this issue. It can not be resolved until we determine how the bus will handle giving out ID's to functional ports that may be deleted.
src/cpu/o3/cpu.cc:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Change the setup of the physPort and virtPort to instead happen every time the CPU has a context activated. This is a little high overhead, but keeps it working correctly when the CPU does not have a physical memory attached to it until it switches in (like the case of switch CPUs).
src/cpu/o3/thread_context.hh:
Change function from being called at init() to just being called whenever the memory ports need to be connected.
src/cpu/o3/thread_context_impl.hh:
Update this to not delete the port if it's the same as the virtPort.
src/cpu/thread_context.hh:
Change function from being called at init() to whenever the memory ports need to be connected.
src/cpu/thread_state.cc:
Instead of initializing the ports, simply connect them, deleting any old ports that might exist. This allows these functions to be called multiple times.
src/cpu/thread_state.hh:
Ports are no longer initialized, but rather connected at context activation time.
--HG--
extra : convert_revision : e399ce5dfbd6ad658c953a7c9c7b69b89a70219e
src/arch/sparc/process.cc:
MachineBytes doesn't exist any more.
src/arch/sparc/regfile.cc:
Add in the miscRegFile for good measure.
src/cpu/o3/isa_specific.hh:
Add in a section for SPARC
src/cpu/o3/sparc/cpu.cc:
src/cpu/o3/sparc/cpu.hh:
src/cpu/o3/sparc/cpu_builder.cc:
src/cpu/o3/sparc/cpu_impl.hh:
src/cpu/o3/sparc/dyn_inst.cc:
src/cpu/o3/sparc/dyn_inst.hh:
src/cpu/o3/sparc/dyn_inst_impl.hh:
src/cpu/o3/sparc/impl.hh:
src/cpu/o3/sparc/params.hh:
src/cpu/o3/sparc/thread_context.cc:
src/cpu/o3/sparc/thread_context.hh:
Sparc version of this file.
--HG--
extra : convert_revision : 34bb5218f802d0a1328132a518cdd769fb59b6a4
src/cpu/o3/alpha/cpu_impl.hh:
Handle the PhysicalPort and VirtualPort in the ThreadState.
src/cpu/o3/cpu.cc:
Initialize the thread context.
src/cpu/o3/thread_context.hh:
Add new function to initialize thread context.
src/cpu/o3/thread_context_impl.hh:
Use code now put into function.
src/cpu/simple_thread.cc:
Move code to ThreadState and use the new helper function.
src/cpu/simple_thread.hh:
Remove init() in this derived class; use init() from ThreadState base class.
src/cpu/thread_state.cc:
Move setting up of Physical and Virtual ports here. Change getMemFuncPort() to connectToMemFunc(), which connects a port to a functional port of the memory object below the CPU.
src/cpu/thread_state.hh:
Update functions.
--HG--
extra : convert_revision : ff254715ef0b259dc80d08f13543b63e4024ca8d
configs/common/FSConfig.py:
Make a SPARC system create an IO bus.
src/python/m5/objects/T1000.py:
Create a T1000 platform
src/arch/sparc/miscregfile.cc:
Initialize the strand status register to the value legion provides.
src/cpu/exetrace.cc:
Truncate an ExtMachInst to a MachInst before comparing with Legion.
--HG--
extra : convert_revision : e4189b572a5297e8362f5bd26d87b74736c8e5f1
src/cpu/simple/timing.cc:
Various updates for deleting requests more properly.
The major change is moving the deletion of the fetch request/packet to after the instruction has executed and completed. This should fix a few bugs because Ron's memory system didn't expect a call for a functional access while a timing access was being processed.
--HG--
extra : convert_revision : c7cf114bb1ff3cdaa7b0a40ed4c5302dc9d3a522
src/cpu/o3/fetch_impl.hh:
Fetch needs to make sure it isn't waiting on an Icache access.
--HG--
extra : convert_revision : b53eb58b9e5a00bdb394134586d1f84f84d1c6e1
src/arch/alpha/interrupts.hh:
No need for this now that the ThreadContext is being used to set these IPRs in interrupts.
Also split up the interrupt checking from the updating of the IPL and interrupt summary.
src/arch/alpha/tlb.cc:
Check the PC for whether or not it's in PAL mode, not the addr.
src/cpu/o3/alpha/cpu.hh:
Split up getting the interrupt from actually processing the interrupt.
src/cpu/o3/alpha/cpu_impl.hh:
Splut up the processing of interrupts.
src/cpu/o3/commit_impl.hh:
Update for ISA-oriented interrupt changes.
src/cpu/o3/fetch_impl.hh:
Fix broken if statement from PcPAL updates, and properly populate the request fields.
Also more debugging output.
src/cpu/ozone/cpu_impl.hh:
Updates for ISA-oriented interrupt stuff.
src/cpu/ozone/front_end_impl.hh:
Populate request fields properly.
src/cpu/simple/base.cc:
Update for interrupt stuff.
--HG--
extra : convert_revision : 9bac3f9ffed4948ee788699b2fa8419bc1ca647c
src/arch/alpha/faults.hh:
Only use pagetable.hh in FS
src/arch/alpha/pagetable.hh:
pagetable.hh should only be included in FS, so protecting it internally should be unnecessary.
src/cpu/exetrace.cc:
Only use tlb.hh in FS
--HG--
extra : convert_revision : 91ea61f2e7970e7146b6d407ee250fcb20cd4d48
use memcpy instead of bcopy
s/u_int32_t/uint32_t/g
fixup endian code to work with solaris
hack to make sure htole() works... Nate, have a good idea to fix this?
src/arch/sparc/faults.cc:
set the reset address to be 40 bits. Makes PC printing easier at least for now.
src/arch/sparc/isa/base.isa:
fix endian issues with condition codes
src/arch/sparc/tlb.hh:
add implemented physical addres constants
src/arch/sparc/utility.hh:
add tlb.hh to utilities
src/base/loader/raw_object.cc:
add a symbol <filename>_start to the symbol table for binaries files
src/base/remote_gdb.cc:
use memcpy instead of bcopy
src/cpu/exetrace.cc:
clean up printing a bit more
src/cpu/m5legion_interface.h:
add tons to the shared interface
src/dev/ethertap.cc:
s/u_int32_t/uint32_t/g
src/dev/ide_atareg.h:
fixup endian code to work with solaris
src/dev/pcidev.cc:
src/sim/param.hh:
hack to make sure htole() works...
--HG--
extra : convert_revision : 4579392184b40bcc1062671a953c6595c685e9b2
Since we don't have a platform yet, you need to comment out the default responder stuff in Bus.py to make it work.
SConstruct:
Add TARGET_ISA to the list of environment variables that end up in the build_env for python
configs/common/FSConfig.py:
add a simple SPARC system to being testing with, you'll need to change makeLinuxAlphaSystem to makeSparcSystem in fs.py for now
src/SConscript:
add a raw file object, at least until we get more info about how to compile openboot properly
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
add parameters for ROM files (OBP/Reset/Hypervisor), a ROM, load files into ROM
src/base/loader/object_file.cc:
src/base/loader/object_file.hh:
add option to try raw when nothing works
src/cpu/exetrace.cc:
cleanup lockstep printing a little bit
src/cpu/m5legion_interface.h:
change the instruction to be 32 bits because it is
src/mem/physical.cc:
fix assert that doesn't work if memory starts somewhere above 0
src/python/m5/objects/BaseCPU.py:
Add if statement to choose between sparc tlbs and alpha tlbs
src/python/m5/objects/System.py:
Add a sparc system that sets the rom addresses correctly
src/python/m5/params.py:
add the ability to add Addr() together
--HG--
extra : convert_revision : bbbd8a56134f2dda2728091f740e2f7119b0c4af
src/cpu/o3/cpu.cc:
Handle draining properly when CPU isn't actually being used.
src/cpu/simple/atomic.cc:
Be sure to set status properly when draining.
src/mem/bus.cc:
Fix for draining.
--HG--
extra : convert_revision : d9796e6693e974f022159029fc9743c49a970c8f
src/cpu/o3/mem_dep_unit_impl.hh:
Initialize mem dep unit properly, add debug output.
--HG--
extra : convert_revision : 3c56dedfa57de1edc4b1c8f8d9bc94e18002eff2
src/cpu/base.cc:
Move clock phase drift code to the base CPU so that any CPU model can use it.
src/cpu/base.hh:
Added two functions to help get the next cycle the CPU should be scheduled.
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Use the function now in BaseCPU.
--HG--
extra : convert_revision : 444494b66ffc85fc473c23f57683c5f9458ad80c
SConstruct:
Add check to see if we need to include libsocket
src/arch/sparc/floatregfile.cc:
src/arch/sparc/intregfile.cc:
use memset rather than bzero and include the appropriate headerfile
src/base/pollevent.cc:
If we're compling under solaris we need sys/file.h
src/base/random.cc:
src/base/random.hh:
solaris doesn't have random(), so use rint with the correct rounding mode
if we're compiling on solaris
src/base/stats/flags.hh:
u_int32_t??
src/base/time.hh:
grab the timersub() define from freebsd since it doesn't exist in solaris
src/cpu/inst_seq.hh:
we don't need to include stdint here
src/sim/byteswap.hh:
the method to detect endianness on Solaris is a little more complex...
--HG--
extra : convert_revision : 6b7db0e900e7bccfc250d65c125065f27280dda1
src/cpu/simple_thread.cc:
Fix up port handling to share code.
src/cpu/thread_state.cc:
Separate code off into a function.
src/cpu/thread_state.hh:
Make a separate function that will get the CPU's memory's functional port.
--HG--
extra : convert_revision : 96a9bb3c5e4b9ba5511678c0fd17f0017c8cd312
src/cpu/simple_thread.cc:
This function should have been deleted from an earlier push.
src/cpu/simple_thread.hh:
Delete this function; it's now in thread_state.hh/.cc.
--HG--
extra : convert_revision : f78dcf9c2b388418030d48d0ea4911c8b8b1f5ff
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix
configs/example/fs.py:
configs/example/se.py:
src/mem/tport.hh:
Hand merge.
--HG--
extra : convert_revision : b9df95534d43b3b311f24ae24717371d03d615bf
configs/example/fs.py:
configs/example/se.py:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.cc:
src/cpu/thread_state.hh:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
No need for mem parameter any more.
src/cpu/checker/cpu.cc:
Use new constructor for simple thread (no more MemObject parameter).
src/cpu/checker/cpu.hh:
Remove MemObject parameter.
src/cpu/memtest/memtest.hh:
Ports now take in their MemObject owner.
src/cpu/o3/alpha/cpu_builder.cc:
Remove mem parameter.
src/cpu/o3/alpha/cpu_impl.hh:
Remove memory parameter and clean up handling of TranslatingPort.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/params.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/atomic.cc:
Remove memory parameter.
--HG--
extra : convert_revision : 43cb44a33b31320d44b69679dcf646c0380d07d3
src/cpu/simple/atomic.hh:
Port now takes in the MemObject that owns it.
src/cpu/simple/timing.hh:
Port now takes in MemObject that owns it.
src/dev/io_device.cc:
src/mem/bus.hh:
Ports now take in the MemObject that owns it.
src/mem/cache/base_cache.cc:
Ports now take in the MemObject that own it.
src/mem/port.hh:
src/mem/tport.hh:
Ports now optionally take in the MemObject that owns it.
--HG--
extra : convert_revision : 890a72a871795987c2236c65937e06973412d349
src/cpu/simple/base.cc:
Make a microcoded op start at the current micropc, rather than starting at 0.
src/cpu/thread_state.cc:
Serialize the microPC and nextMicroPC
--HG--
extra : convert_revision : 5302215f17312ecef3ff4c6548acb05297ee4ff6
src/cpu/base_dyn_inst.hh:
Extend BaseDynInst a little bit so it can be use as a TC as well (specifically for ll/sc code).
src/cpu/base_dyn_inst_impl.hh:
Add variable to track if the result of the instruction should be recorded.
src/cpu/o3/alpha/cpu_impl.hh:
Clear lock flag upon hwrei.
src/cpu/o3/lsq_unit.hh:
Use ISA specified handling of locked reads.
src/cpu/o3/lsq_unit_impl.hh:
Use ISA specified handling of locked writes.
--HG--
extra : convert_revision : 1f5c789c35deb4b016573c02af4aab60d726c0e5
Fix fixPacket assert function.
Stop timing port from forwarding the request if a response was found in its queue on a read.
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/python/m5/objects/MemTest.py:
Add parameter to configure what percentage of mem accesses are functional
src/mem/cache/base_cache.cc:
src/mem/cache/cache_impl.hh:
Use fix Packet function
src/mem/packet.cc:
Fix an assert that was checking the wrong thing
src/mem/tport.cc:
Properly detect if we need to do the access to the functional device
--HG--
extra : convert_revision : 447cc1a9a65ddd2a41e937fb09dc0e7c74e9c75e
src/cpu/memtest/memtest.cc:
Fix memtest to do functional accesses
src/mem/cache/cache_impl.hh:
Fix cache to handle functional accesses properly based on memtester changes
Still need to fix functional accesses in timing mode now that the memtester can test it.
--HG--
extra : convert_revision : a6dbca4dc23763ca13560fbf5d41a23ddf021113
?? doesn't compile in warn statements
Should have been false, where I had a true.
src/cpu/o3/lsq_impl.hh:
Apparently you can't have ?? in a warn statement (Something about trigraphs)
src/mem/cache/cache_impl.hh:
Forgot to signal atomic mode in snoopProbe
--HG--
extra : convert_revision : c75cb76e193e852284564993440c8ea39e6de426
src/cpu/exetrace.cc:
Fixed up to deal with microcode, and to make floating point register numbers correlate to the numbers used in SPARC.
util/statetrace/arch/tracechild_sparc.cc:
util/statetrace/arch/tracechild_sparc.hh:
Make floating point register numbers correlate to the numbers used in SPARC.
--HG--
extra : convert_revision : 878897292f696092453cf61d6eac2d1c407ca13b
Still a bug in atomic uni-coherence in FS.
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Make CPU models handle coherence requests
src/mem/cache/base_cache.cc:
Properly signal coherence CSHRs
src/mem/cache/coherence/uni_coherence.cc:
Only deallocate once
--HG--
extra : convert_revision : c4533de421c371c5532ee505e3ecd451511f5c99
src/arch/sparc/isa/formats/blockmem.isa:
Several small and medium bug fixes.
src/cpu/simple/base.cc:
Fixed a few compiler errors and made sure the next micro pc is set to 1 to prevent the first microop from executing twice. Also fixed a fetching bug.
src/cpu/thread_state.cc:
Made sure the microPC and nextMicroPC are initialized properly.
--HG--
extra : convert_revision : a0fc8aa18d1ade916f17c557181a793c6108a8af
src/cpu/o3/fetch_impl.hh:
Move assertion to area where it should really always be true. Sometimes you might recvRetry and not necessarily be blocked (if there was a squash).
--HG--
extra : convert_revision : 76ad35357e7f4c44fa544ffed071096a62053018
into zed.eecs.umich.edu:/z/hsul/work/m5/newmem
src/cpu/simple/timing.cc:
hand merge
--HG--
extra : convert_revision : 083bf102249ad9bc63c447dbf85d3863f935f647
src/cpu/simple/atomic.cc:
memory mode assertion change so that it only goes off if it's supposed to.
src/cpu/simple/timing.cc:
some drain changes (kevin's) and some changes to memoryMode assertions so that they don't go off when they're not supposed to.
--HG--
extra : convert_revision : 007d8610f097e08f01367b905ada49f93cf37ca3
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
Make Memtester able to test atomic as well
src/mem/bus.cc:
src/mem/bus.hh:
Handle atomic snoops properly for cache->cache transfers
src/mem/cache/cache_impl.hh:
Debug output.
Clean up memleak in atomic mode.
Set hitLatency.
Still need to send back reasonable number for atomic return value.
src/mem/packet.cc:
Add command strings for new commands
src/python/m5/objects/MemTest.py:
Add param to test atomic memory.
--HG--
extra : convert_revision : 43f880e29215776167c16ea90793ebf8122c785b
into zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/cpu/simple/timing.hh:
tests/configs/o3-timing-mp.py:
Hand merge.
--HG--
extra : convert_revision : a58cc439eb5e8f900d175ed8b5a85b6c8723e558
src/cpu/o3/cpu.cc:
Comment out reseting CPU structures for now. This can be updated to work in the future.
--HG--
extra : convert_revision : bc1a86e2fe47da5acb14ba8b64568b0355431f1c
src/cpu/memtest/memtest.cc:
Fix functional return path
src/cpu/memtest/memtest.hh:
Add snoop ranges in
src/mem/cache/base_cache.cc:
Properly signal NACKED
src/mem/cache/cache_impl.hh:
Catch nacked packet and panic for now
--HG--
extra : convert_revision : 59a64e82254dfa206681c5f987e6939167754d67
src/cpu/checker/thread_context.hh:
Checker's TC should only copy state, and not fully take over from the old context (prevents it from accidentally stealing the quiesce event).
--HG--
extra : convert_revision : 5760f9c5bae749f8d1df35e4c898df13e41b0224
src/cpu/SConscript:
Add memtester to the compilation environment.
Someone who knows this better should make the MemTest a cpu model parameter.
For now attached with the build of o3 cpu.
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
Update Memtest for new mem system
src/python/m5/objects/MemTest.py:
Update memtest python description
--HG--
extra : convert_revision : d6a63e08fda0975a7abfb23814a86a0caf53e482
src/cpu/simple/atomic.cc:
add in serialization of AtomicSimpleCPU _status. Kev says that this will break uniform serialization across CPUs since each type of CPU has its own "status" enum set. So, the repercussions are that if you serialize in this CPU, you must first unserialize in this CPU before switching to something else you want.
--HG--
extra : convert_revision : 7000f660aecea6fef712bf81853d9a7b90d625ee
If the cpu needs to update any state when it gets a functional write (LSQ??)
then that code needs to be written.
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
CPU's can recieve functional accesses, they need to determine if they need to do anything with them.
src/mem/bus.cc:
src/mem/bus.hh:
Make the fuctional path do the correct tye of snoop
--HG--
extra : convert_revision : 70d09f954b907a8aa9b8137579cd2b06e02ae2ff
and PhysicalMemory. *No* support for caches or O3CPU.
Note that properly setting cpu_id on all CPUs is now required
for correct operation.
src/arch/SConscript:
src/base/traceflags.py:
src/cpu/base.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/request.hh:
src/python/m5/objects/BaseCPU.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
Implement Alpha LL/SC support for SimpleCPU (Atomic & Timing)
and PhysicalMemory. *No* support for caches or O3CPU.
--HG--
extra : convert_revision : 6ce982d44924cc477e049b9adf359818908e72be
src/cpu/simple/timing.cc:
Record numCycles stat properly.
src/cpu/simple/timing.hh:
Extra variable to help record numCycles stat.
--HG--
extra : convert_revision : 343311902831820264878aad41dc619999726b6b
src/cpu/o3/commit_impl.hh:
Fixes for compile and sampling.
src/cpu/o3/cpu.cc:
Deallocate and activate threads properly. Also hopefully fix being able to use caches while switching over.
src/cpu/o3/cpu.hh:
Fixes for deallocating and activating threads.
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_unit.hh:
Handle getting back a BadAddress result from the access.
src/cpu/o3/iew_impl.hh:
More debug output.
src/cpu/o3/lsq_unit_impl.hh:
Fixup store conditional handling (still a bit of a hack, but works now).
Also handle getting back a BadAddress result from the access.
src/cpu/o3/thread_context_impl.hh:
Deallocate context now records if the context should be fully removed.
--HG--
extra : convert_revision : 55f81660602d0e25367ce1f5b0b9cfc62abe7bf9
src/SConscript:
Include MemTest for now. It's not complete but it compiles so it shouldn't mess anything else up.
--HG--
extra : convert_revision : 15a610c855b677fdced817850c92e4c911cf6d1c
1) return the periodicity of checkpoints back into the code (i.e. make m5 checkpoint n m meaningful again).
2) to do this, i had to much around with being able to repeatedly schedule and SimLoopExitEvent, which led to changes in how exit simloop events are handled to make this easier.
src/arch/alpha/isa/decoder.isa:
src/mem/cache/cache_impl.hh:
modify arg. order for new calling convention of exitSimLoop.
src/cpu/base.cc:
src/sim/main.cc:
src/sim/pseudo_inst.cc:
src/sim/root.cc:
now, instead of creating a new SimLoopExitEvent, call a wrapper schedExitSimLoop which handles all the default args.
src/sim/sim_events.cc:
src/sim/sim_events.hh:
src/sim/sim_exit.hh:
add the periodicity of checkpointing back into the code.
to facilitate this, there are now two wrappers (instead of just overloading exitSimLoop). exitSimLoop is only for exiting NOW (i.e. at curTick), while schedExitSimLoop schedules and exit event for the future.
--HG--
extra : convert_revision : c61f4bf05517172edd2c83368fd10bb0f0678029
into zeep.eecs.umich.edu:/home/gblack/m5/newmem
src/cpu/ozone/cpu_impl.hh:
Hand merged
--HG--
extra : convert_revision : f8a5b0205bcb78c8f5e109f456fe7bca80a7abac
src/arch/alpha/isa_traits.hh:
This got changed to the wrong version by accident.
src/cpu/base.cc:
Fix up progress event to not schedule itself if the interval is set to 0.
src/cpu/base.hh:
Fix up the CPU Progress Event to not print itself if it's set to 0. Also remove stats_reset_inst (something I added to m5 but isn't necessary here).
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.hh:
Remove float variable of instResult; it's always held within the double part now.
src/cpu/checker/cpu_impl.hh:
Use thread and not cpuXC.
src/cpu/o3/alpha/cpu_builder.cc:
src/cpu/o3/checker_builder.cc:
src/cpu/ozone/checker_builder.cc:
src/cpu/ozone/cpu_builder.cc:
src/python/m5/objects/BaseCPU.py:
Remove stats_reset_inst.
src/cpu/o3/commit_impl.hh:
src/cpu/ozone/lw_back_end_impl.hh:
Get TC, not XCProxy.
src/cpu/o3/cpu.cc:
Switch out updates from the version of m5 I have. Also remove serialize code that got added twice.
src/cpu/o3/iew_impl.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/thread_state.hh:
Remove code that was added twice.
src/cpu/o3/lsq_unit.hh:
Add back in stats that got lost in the merge.
src/cpu/o3/lsq_unit_impl.hh:
Use proper method to get flags. Also wake CPU if we're coming back from a cache miss.
src/cpu/o3/thread_context_impl.hh:
src/cpu/o3/thread_state.hh:
Support profiling.
src/cpu/ozone/cpu.hh:
Update to use proper typename.
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/dyn_inst_impl.hh:
Updates for newmem.
src/cpu/ozone/lw_lsq_impl.hh:
Get flags correctly.
src/cpu/ozone/thread_state.hh:
Reorder constructor initialization, use tc.
src/sim/pseudo_inst.cc:
Allow for loading of symbol file. Be sure to use ThreadContext and not ExecContext.
--HG--
extra : convert_revision : c5657f84155807475ab4a1e20d944bb6f0d79d94
src/cpu/o3/fetch_impl.hh:
Fix ordering so dereference works
src/cpu/o3/lsq_impl.hh:
Check to make sure we didn't squash already
src/cpu/o3/lsq_unit.hh:
Fix for counting squashed retrys in the WB count
src/cpu/o3/lsq_unit_impl.hh:
Make sure to set retryID for stores, and clear it appropriately
--HG--
extra : convert_revision : 689765a1baea7b36f13eb177d65e97b52b6da09f
src/arch/alpha/regfile.hh:
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/int_regfile.hh:
src/arch/mips/regfile/misc_regfile.hh:
src/cpu/exetrace.hh:
Added functions to start to support dumping register values once per cycle.
src/cpu/exetrace.cc:
Added some code to support printing the value of registers after each cycle.
src/python/m5/main.py:
Options to turn on output after every instruction. They are commented out.
--HG--
extra : convert_revision : 168a48a6b98ab6be412a96bdee831c71906958b0
src/arch/mips/isa/base.isa:
special case syscall disasembly... maybe give own instruction class?
src/arch/mips/isa/decoder.isa:
add 'IsSerializeAfter' flag for syscall
src/cpu/o3/commit.hh:
Add skidBuffer to commit
src/cpu/o3/commit_impl.hh:
Use skidbuffer in MIPS ISA
src/cpu/o3/fetch_impl.hh:
Print name out when there is a fault
src/cpu/o3/mips/cpu_impl.hh:
change comment
--HG--
extra : convert_revision : d032549e07102bdd50aa09f044fce8de6f0239b5
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-o3
--HG--
extra : convert_revision : be1e5dcb1c5025db8526e628c2060b1790d38227
succesfully but there are some minor quirks to iron out. Who would've known a DELAY SLOT introduces that much complexity?! arrgh!
Anyways, a lot of this stuff had to do with my project at MIPS and me needing to know how I was going to get this working for the MIPS
ISA. So I figured I would try to touch it up and throw it in here (I hate to introduce non-completely working components... )
src/arch/alpha/isa/mem.isa:
spacing
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
Gabe really authored this
src/arch/mips/isa/decoder.isa:
add StoreConditional Flag to instruction
src/arch/mips/isa/formats/basic.isa:
Steven really did this file
src/arch/mips/isa/formats/branch.isa:
fix bug for uncond/cond control
src/arch/mips/isa/formats/mem.isa:
Adjust O3CPU memory access to use new memory model interface.
src/arch/mips/isa/formats/util.isa:
update LoadStoreBase template
src/arch/mips/isa_traits.cc:
update SERIALIZE partially
src/arch/mips/process.cc:
src/arch/mips/process.hh:
no need for this for NOW. ASID/Virtual addressing handles it
src/arch/mips/regfile/misc_regfile.hh:
add in clear() function and comments for future usage of special misc. regs
src/cpu/base_dyn_inst.hh:
add in nextNPC variable and supporting functions.
add isCondDelaySlot function
Update predTaken and mispredicted functions
src/cpu/base_dyn_inst_impl.hh:
init nextNPC
src/cpu/o3/SConscript:
add MIPS files to compile
src/cpu/o3/alpha/thread_context.hh:
no need for my name on this file
src/cpu/o3/bpred_unit_impl.hh:
Update RAS appropriately for MIPS
src/cpu/o3/comm.hh:
add some extra communication variables to aid in handling the
delay slots
src/cpu/o3/commit.hh:
minor name fix for nextNPC functions.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/rename_impl.hh:
Fix necessary variables and functions for squashes with delay slots
src/cpu/o3/cpu.cc:
Update function interface ...
adjust removeInstsNotInROB function to recognize delay slots insts
src/cpu/o3/cpu.hh:
update removeInstsNotInROB
src/cpu/o3/decode.hh:
declare necessary variables for handling delay slot
src/cpu/o3/dyn_inst.hh:
Add in MipsDynInst
src/cpu/o3/fetch.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/rename.hh:
declare necessary variables and adjust functions for handling delay slot
src/cpu/o3/inst_queue.hh:
src/cpu/simple/base.cc:
no need for my name here
src/cpu/o3/isa_specific.hh:
add in MIPS files
src/cpu/o3/scoreboard.hh:
dont include alpha specific isa traits!
src/cpu/o3/thread_context.hh:
no need for my name here, i just rearranged where the file goes
src/cpu/static_inst.hh:
add isCondDelaySlot function
src/cpu/o3/mips/cpu.cc:
src/cpu/o3/mips/cpu.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/mips/dyn_inst.cc:
src/cpu/o3/mips/dyn_inst.hh:
src/cpu/o3/mips/dyn_inst_impl.hh:
src/cpu/o3/mips/impl.hh:
src/cpu/o3/mips/params.hh:
src/cpu/o3/mips/thread_context.cc:
src/cpu/o3/mips/thread_context.hh:
MIPS file for O3CPU...mirrors ALPHA definition
--HG--
extra : convert_revision : 9bb199b4085903e49ffd5a4c8ac44d11460d988c
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge
configs/test/fs.py:
Hand merge.
--HG--
extra : convert_revision : 78f7c46084f66d52ddfe0386fd7c08de8017331e
SConstruct:
Include an option to specify the CPUs being tested.
src/cpu/SConscript:
Checker isn't SMT right now, so don't do SMT tests with the O3CPU if we're using the checker.
src/python/m5/objects/O3CPU.py:
Include default options. Unfortunately FullO3Config.py is still needed because it specifies which FUPool is being used.
tests/SConscript:
Several minor updates (sorry for one commit). Updated the copyright and fixed some m5 style issues. Also added the ability to specify which CPUs to run the tests on.
--HG--
extra : convert_revision : b0b801115705544ea02e572e31314f7bb8b5f0f2
Add a max time option in seconds and a single system root clock be 1THz
configs/test/fs.py:
Add a max time option in seconds and a single system root clock be 1THz
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Enforce the timing cpu ticking at it's clock rate
--HG--
extra : convert_revision : a1b0de27abde867f9c3da5bec11639e3d82a95f5
src/cpu/checker/cpu.hh:
Don't count checker's instructions towards total instructions committed.
src/python/m5/objects/Root.py:
Set default clock to 1 THz.
--HG--
extra : convert_revision : 0b5eaa197c860c361a3b00087e45ddc249ff1918
Right now only non-SMT SE regression tests have been added back in. The rest are pending getting SMT working, and consolidating the FS configuration files.
Eventually support for different OSs can be added so you can specify which versions of the binary you want to run from one config file.
Note: mp-test1 doesn't have any reference stats because MP mode doesn't currently work. The test itself should probably work once the code is fixed.
SConstruct:
Updates to allow for regression tests to work via the command line "scons build/ALPHA_SE/test/debug/quick" and such once again.
src/cpu/SConscript:
Keep a list of SMT supporting CPUs so that the regression tests can easily specify which CPUs to use if they are SMT only.
--HG--
extra : convert_revision : 34e6286150aae8f316ae694f6c00be8f510522f2
src/cpu/o3/lsq_unit.hh:
LSQ needs to decrement the WB counter if the load is going to be replayed.
src/cpu/o3/lsq_unit_impl.hh:
LSQ needs to decrement the WB counter if the load is squashed.
--HG--
extra : convert_revision : 20a10baf0d6ab46065e561ddba231251865ebdbd
src/arch/SConscript:
Fixes for including the CheckerCPU if it's specified via command line. Previously the env variable was actually being modified.
src/cpu/SConscript:
Copy the CPU_MODELS from the env, don't create a proxy to it.
--HG--
extra : convert_revision : 7d069bd93a6834ccaa1c378b2bc76dce76745c19
suspend context will now take the thread off the activeThread list.
src/arch/mips/isa_traits.cc:
add in copy MiscRegs unimplemented function
--HG--
extra : convert_revision : 3ed5320b3786f84d4bb242e3a32b6f415339c3ba
src/cpu/o3/lsq.hh:
Update to have LSQ work with only one dcache port for all LSQ Units. LSQ has the dcache port, and the LSQ Units must tell the LSQ if the cache has become blocked.
src/cpu/o3/lsq_impl.hh:
Updates to have the LSQ work with only one dcache port for all LSQUnits.
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
Update for LSQ to create dcache port instead of LSQUnits. Now LSQUnits are given the dcache port from the LSQ, and also must check the LSQ if the cache is blocked prior to accessing the cache.
--HG--
extra : convert_revision : 2708adbf323f4e7647dc0c1e31ef5bb4596b89f8
