Static analysis unearther a bunch of uninitialised variables and
members, and this patch addresses the problem. In all cases these
omissions seem benign in the end, but at least fixing them means less
false positives next time round.
This patch tidies up random number generation to ensure that it is
done consistently throughout the code base. In essence this involves a
clean-up of Ruby, and some code simplifications in the traffic
generator.
As part of this patch a bunch of skewed distributions (off-by-one etc)
have been fixed.
Note that a single global random number generator is used, and that
the object instantiation order will impact the behaviour (the sequence
of numbers will be unaffected, but if module A calles random before
module B then they would obviously see a different outcome). The
dependency on the instantiation order is true in any case due to the
execution-model of gem5, so we leave it as is. Also note that the
global ranom generator is not thread safe at this point.
Regressions using the memtest, TrafficGen or any Ruby tester are
affected and will be updated accordingly.
For X86, the o3 CPU would get stuck with the commit stage not being
drained if an interrupt arrived while drain was pending. isDrained()
makes sure that pcState.microPC() == 0, thus ensuring that we are at
an instruction boundary. However, when we take an interrupt we
execute:
pcState.upc(romMicroPC(entry));
pcState.nupc(romMicroPC(entry) + 1);
tc->pcState(pcState);
As a result, the MicroPC is no longer zero. This patch ensures the drain is
delayed until no interrupts are present. Once draining, non-synchronous
interrupts are deffered until after the switch.
Analogous to ee049bf (for x86). Requires a bump of the checkpoint version
and corresponding upgrader code to move the condition code register values
to the new register file.
A small bug in the bimodal predictor caused significant degradation in
performance on some benchmarks. This was caused by using the wrong
globalHistoryReg during the update phase. This patches fixes the bug
and brings the performance to normal level.
This patch fixes the load blocked/replay mechanism in the o3 cpu. Rather than
flushing the entire pipeline, this patch replays loads once the cache becomes
unblocked.
Additionally, deferred memory instructions (loads which had conflicting stores),
when replayed would not respect the number of functional units (only respected
issue width). This patch also corrects that.
Improvements over 20% have been observed on a microbenchmark designed to
exercise this behavior.
O3 is supposed to stop fetching instructions once a quiesce is encountered.
However due to a bug, it would continue fetching instructions from the current
fetch buffer. This is because of a break statment that only broke out of the
first of 2 nested loops. It should have broken out of both.
The o3 cpu could attempt to schedule inactive threads under round-robin SMT
mode.
This is because it maintained an independent priority list of threads from the
active thread list. This priority list could be come stale once threads were
inactive, leading to the cpu trying to fetch/commit from inactive threads.
Additionally the fetch queue is now forcibly flushed of instrctuctions
from the de-scheduled thread.
Relevant output:
24557000: system.cpu: [tid:1]: Calling deactivate thread.
24557000: system.cpu: [tid:1]: Removing from active threads list
24557500: system.cpu:
FullO3CPU: Ticking main, FullO3CPU.
24557500: system.cpu.fetch: Running stage.
24557500: system.cpu.fetch: Attempting to fetch from [tid:1]
When a branch mispredicted gem5 would squash all history after and including
the mispredicted branch. However, the mispredicted branch is still speculative
and its history is required to rollback state if another, older, branch
mispredicts. This leads to things like RAS corruption.
This patch adds a fetch queue that sits between fetch and decode to the
o3 cpu. This effectively decouples fetch from decode stalls allowing it
to be more aggressive, running futher ahead in the instruction stream.
The o3 pipeline interlock/stall logic is incorrect. o3 unnecessicarily stalled
fetch and decode due to later stages in the pipeline. In general, a stage
should usually only consider if it is stalled by the adjacent, downstream stage.
Forcing stalls due to later stages creates and results in bubbles in the
pipeline. Additionally, o3 stalled the entire frontend (fetch, decode, rename)
on a branch mispredict while the ROB is being serially walked to update the
RAT (robSquashing). Only should have stalled at rename.
As highlighed on the mailing list gem5's writeback modeling can impact
performance. This patch removes the limitation on maximum outstanding issued
instructions, however the number that can writeback in a single cycle is still
respected in instToCommit().
We currently generate and compile one version of the ISA code per CPU
model. This is obviously wasting a lot of resources at compile
time. This changeset factors out the interface into a separate
ExecContext class, which also serves as documentation for the
interface between CPUs and the ISA code. While doing so, this
changeset also fixes up interface inconsistencies between the
different CPU models.
The main argument for using one set of ISA code per CPU model has
always been performance as this avoid indirect branches in the
generated code. However, this argument does not hold water. Booting
Linux on a simulated ARM system running in atomic mode
(opt/10.linux-boot/realview-simple-atomic) is actually 2% faster
(compiled using clang 3.4) after applying this patch. Additionally,
compilation time is decreased by 35%.
The namespace Message conflicts with the Message data type used extensively
in Ruby. Since Ruby is being moved to the same Master/Slave ports based
configuration style as the rest of gem5, this conflict needs to be resolved.
Hence, the namespace is being renamed to ProtoMessage.
The branch predictor is normally only built when a CPU that uses a
branch predictor is built. The list of CPUs is currently incomplete as
the simple CPUs support branch predictors (for warming, branch stats,
etc). In practice, all CPU models now use branch predictors, so this
changeset removes the CPU model check and replaces it with a check for
the NULL ISA.
RefCountingPtr is sometimes forward declared to avoid having to
include refcnt.hh. This does not work since we typically return
instances of RefCountingPtr rather than references to instances. The
only reason this currently works is that we include refcnt.hh in
cprintf.hh, which "leaks" the header to most other source files. This
changeset replaces such forward declarations with an include of
refcnt.hh.
This patch does some minor house keeping of the branch predictor by
adopting STL containers, and shifting some iterator to use range-based
for loops.
The predictor history is also changed from a list to a deque as we
never to insertion/deletion other than at the front and back.
This patch adds a check to ensure that packets which are not going to
a memory range are suppressed in the traffic generator. Thus, if a
trace is collected in full-system, the packets destined for devices
are not played back.
This patch contains a new CPU model named `Minor'. Minor models a four
stage in-order execution pipeline (fetch lines, decompose into
macroops, decompose macroops into microops, execute).
The model was developed to support the ARM ISA but should be fixable
to support all the remaining gem5 ISAs. It currently also works for
Alpha, and regressions are included for ARM and Alpha (including Linux
boot).
Documentation for the model can be found in src/doc/inside-minor.doxygen and
its internal operations can be visualised using the Minorview tool
utils/minorview.py.
Minor was designed to be fairly simple and not to engage in a lot of
instruction annotation. As such, it currently has very few gathered
stats and may lack other gem5 features.
Minor is faster than the o3 model. Sample results:
Benchmark | Stat host_seconds (s)
---------------+--------v--------v--------
(on ARM, opt) | simple | o3 | minor
| timing | timing | timing
---------------+--------+--------+--------
10.linux-boot | 169 | 1883 | 1075
10.mcf | 117 | 967 | 491
20.parser | 668 | 6315 | 3146
30.eon | 542 | 3413 | 2414
40.perlbmk | 2339 | 20905 | 11532
50.vortex | 122 | 1094 | 588
60.bzip2 | 2045 | 18061 | 9662
70.twolf | 207 | 2736 | 1036
Check for free entries in Load Queue and Store Queue separately to
avoid cases when load cannot be renamed due to full Store Queue and
vice versa.
This work was done while Binh was an intern at AMD Research.
Using '== true' in a boolean expression is totally redundant,
and using '== false' is pretty verbose (and arguably less
readable in most cases) compared to '!'.
It's somewhat of a pet peeve, perhaps, but I had some time
waiting for some tests to run and decided to clean these up.
Unfortunately, SLICC appears not to have the '!' operator,
so I had to leave the '== false' tests in the SLICC code.
This patch removes the stat totalCommittedInsts. This variable was used for
recording the total number of instructions committed across all the threads
of a core. The instructions committed by each thread are recorded invidually.
The total would now be generated by summing these individual counts.
This patch adds a the member function StaticInst::printFlags to allow all
of an instruction's flags to be printed without using the individual
is... member functions or resorting to exposing the 'flags' vector
It also replaces the enum definition StaticInst::Flags with a
Python-generated enumeration and adds to the enum generation mechanism
in src/python/m5/params.py to allow Enums to be placed in namespaces
other than Enums or, alternatively, in wrapper structs allowing them to
be inherited by other classes (so populating that class's name-space
with the enumeration element names).
The ARM TLBs have a bootUncacheability flag used to make some loads
and stores become uncacheable when booting in FS mode. Later the
flag is cleared to let those loads and stores operate as normal. When
doing a takeOverFrom(), this flag's state is not preserved and is
momentarily reset until the CPSR is touched. On single core runs this
is a non-issue. On multi-core runs this can lead to crashes on the O3
CPU model from the following series of events:
1) takeOverFrom executed to switch from Atomic -> O3
2) All bootUncacheability flags are reset to true
3) Core2 tries to execute a load covered by bootUncacheability, it
is flagged as uncacheable
4) Core2's load needs to replay due to a pipeline flush
3) Core1 core does an action on CPSR
4) The handling code for CPSR then checks all other cores
to determine if bootUncacheability can be set to false
5) Asynchronously set bootUncacheability on all cores to false
6) Core2 replays load previously set as uncacheable and notices
it is now flagged as cacheable, leads to a panic.
This patch implements takeOverFrom() functionality for the ARM TLBs
to preserve flag values when switching from atomic -> detailed.
For the o3, add instruction mix (OpClass) histogram at commit (stats
also already collected at issue). For the simple CPUs we add a
histogram of executed instructions
Allow the specification of a socket ID for every core that is reflected in the
MPIDR field in ARM systems. This allows studying multi-socket / cluster
systems with ARM CPUs.
In the O3 LSQ, data read/written is printed out in DPRINTFs. However,
the data field is treated as a character string with a null terminated.
However the data field is not encoded this way. This patch removes
that possibility by removing the data part of the print.
O3CPU has a compile-time maximum width set in o3/impl.hh, but checking
the configuration against this limit was not implemented anywhere
except for fetch. Configuring a wider pipe than the limit can silently
cause various issues during the simulation. This patch adds the proper
checking in the constructor of the various pipeline stages.
A number of calls to isEmpty() and numFreeEntries()
should be thread-specific.
In cpu.cc, the fact that tid is /*commented*/ out is a bug. Say the rob
has instructions from thread 0 (isEmpty() returns false), and none from
thread 1. If we are trying to squash all of thread 1, then
readTailInst(thread 1) will be called because rob->isEmpty() returns
false. The result is end_it is not in the list and the while
statement loops indefinitely back over the cpu's instList.
In iew_impl.hh, all threads are told they have the entire remaining IQ, when
each thread actually has a certain allocation. The result is extra stalls at
the iew dispatch stage which the rename stage usually takes care of.
In commit_impl.hh, rob->readHeadInst(thread 1) can be called if the rob only
contains instructions from thread 0. This returns a dummyInst (which may work
since we are trying to squash all instructions, but hardly seems like the right
way to do it).
In rob_impl.hh this fix skips the rest of the function more frequently and is
more efficient.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
Simulating a SMP or multicore requires devices to be shared between
multiple KVM vCPUs. This means that locking is required when accessing
devices. This changeset adds the necessary locking to allow devices to
execute correctly. It is implemented by temporarily migrating the KVM
CPU to the VM's (and devices) event queue when handling
MMIO. Similarly, the VM migrates to the interrupt controller's event
queue when delivering an interrupt.
The support for fast-forwarding of multicore simulations added by this
changeset assumes that all devices in a system are simulated in the
same thread and each vCPU has its own thread. Special care must be
taken to ensure that devices living under the CPU in the object
hierarchy (e.g., the interrupt controller) do not inherit the parent
CPUs thread and are assigned to device thread. The KvmVM object is
assumed to live in the same thread as the other devices in the system.
This patch fixes violation of TSO in the O3CPU, as all loads must be
ordered with all other loads. In the LQ, if a snoop is observed, all
subsequent loads need to be squashed if the system is TSO.
Prior to this patch, the following case could be violated:
P0 | P1 ;
MOV [x],mail=/usr/spool/mail/nilay | MOV EAX,[y] ;
MOV [y],mail=/usr/spool/mail/nilay | MOV EBX,[x] ;
exists (1:EAX=1 /\ 1:EBX=0) [is a violation]
The problem was found using litmus [http://diy.inria.fr].
Committed by: Nilay Vaish <nilay@cs.wisc.edu
This patch enables a new 'DRAM' mode to the existing traffic
generator, catered to generate specific requests to DRAM based on
required hit length (stride size) and bank utilization. It is an add on
to the Random mode.
The basic idea is to control how many successive packets target the
same page, and how many banks are being used in parallel. This gives a
two-dimensional space that stresses different aspects of the DRAM
timing.
The configuration file needed to use this patch has to be changed as
follow: (reference to Random Mode, LPDDR3 memory type)
'STATE 0 10000000000 RANDOM 50 0 134217728 64 3004 5002 0'
-> 'STATE 0 10000000000 DRAM 50 0 134217728 32 3004 5002 0 96 1024 8 6 1'
The last 4 parameters to be added are:
<stride size (bytes), page size(bytes), number of banks available in DRAM,
number of banks to be utilized, address mapping scheme>
The address mapping information is used to get the stride address
stream of the specified size and to know where to find the bank
bits. The configuration file has a parameter where '0'-> RoCoRaBaCh,
'1'-> RoRaBaCoCh/RoRaBaChCo address-mapping schemes. Note that the
generator currently assumes a single channel and a single rank. This
is to avoid overwhelming the traffic generator with information about
the memory organisation.
Prevent incomplete configuration of TrafficGen class from causing
segmentation faults. If an 'INIT' line is not present in the
configuration file then the currState variable will remain
uninitialized which may result in a crash.
KVM used to use two signals, one for instruction count exits and one
for timer exits. There is really no need to distinguish between the
two since they only trigger exits from KVM. This changeset unifies and
renames the signals and adds a method, kick(), that can be used to
raise the control signal in the vCPU thread. It also removes the early
timer warning since we do not normally see if the signal was
delivered.
--HG--
extra : rebase_source : cd0e45ca90894c3d6f6aa115b9b06a1d8f0fda4d
gem5 seems to store the PC as RIP+CS_BASE. This is not what KVM
expects, so we need to subtract CS_BASE prior to transferring the PC
into KVM. This changeset adds the necessary PC manipulation and
refactors thread context updates slightly to avoid reading registers
multiple times from KVM.
--HG--
extra : rebase_source : 3f0569dca06a1fcd8694925f75c8918d954ada44
This changeset adds support for INIT and STARTUP IPI handling. We
currently handle both of these interrupts in gem5 and transfer the
state to KVM. Since we do not have a BIOS loaded, we pretend that the
INIT interrupt suspends the CPU after reset.
--HG--
extra : rebase_source : 7f3b25f3801d68f668b6cd91eaf50d6f48ee2a6a
When transferring segment registers into kvm, we need to find the
value of the unusable bit. We used to assume that this could be
inferred from the selector since segments are generally unusable if
their selector is 0. This assumption breaks in some weird corner
cases. Instead, we just assume that segments are always usable. This
is what qemu does so it should work.
Signal handlers in KVM are controlled per thread and should be
initialized from the thread that is going to execute the CPU. This
changeset moves the initialization call from startup() to
startupThread().
A copyRegs() function is added to MIPS utilities
to copy architectural state from the old CPU to
the new CPU during fast-forwarding. This
addition alone enables fast-forwarding for the
o3 cpu model running MIPS.
The patch also adds takeOverFrom() and
drainResume() functions to the InOrderCPU to
enable it to take over from another CPU. This
change enables fast-forwarding for the inorder
cpu model running MIPS, but not for Alpha.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
The introduction of parallel event queues added most of the support
needed to run multiple VMs (systems) within the same gem5
instance. This changeset fixes up signal delivery so that KVM's
control signals are delivered to the thread that executes the CPU's
event queue. Specifically:
* Timers and counters are now initialized from a separate method
(startupThread) that is scheduled as the first event in the
thread-specific event queue. This ensures that they are
initialized from the thread that is going to execute the CPUs
event queue and enables signal delivery to the right thread when
exiting from KVM.
* The POSIX-timer-based KVM timer (used to force exits from KVM) has
been updated to deliver signals to the thread that's executing KVM
instead of the process (thread is undefined in that case). This
assumes that the timer is instantiated from the thread that is
going to execute the KVM vCPU.
* Signal masking is now done using pthread_sigmask instead of
sigprocmask. The behavior of the latter is undefined in threaded
applications.
* Since signal masks can be inherited, make sure to actively unmask
the control signals when setting up the KVM signal mask.
There are currently no facilities to multiplex between multiple KVM
CPUs in the same event queue, we are therefore limited to
configurations where there is only one KVM CPU per event queue. In
practice, this means that multi-system configurations can be
simulated, but not multiple CPUs in a shared-memory configuration.
This changesets adds branch predictor support to the
BaseSimpleCPU. The simple CPUs normally don't need a branch predictor,
however, there are at least two cases where it can be desirable:
1) A simple CPU can be used to warm the branch predictor of an O3
CPU before switching to the slower O3 model.
2) The simple CPU can be used as a quick way of evaluating/debugging
new branch predictors since it exposes branch predictor
statistics.
Limitations:
* Since the simple CPU doesn't speculate, only one instruction will
be active in the branch predictor at a time (i.e., the branch
predictor will never see speculative branches).
* The outcome of a branch prediction does not affect the performance
of the simple CPU.
Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.
Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.
Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
The CheckerCPU model in pre-v8 code was not checking the
updates to miscellaneous registers due to some methods
for setting misc regs were not instrumented. The v8 patches
exposed this by calling the instrumented misc reg update
methods and then invoking the checker before the main CPU had
updated its misc regs, leading to false positives about
register mismatches. This patch fixes the non-instrumented
misc reg update methods and places calls to the checker in
the proper places in the O3 model.
With ARMv8 support the same misc register id results in accessing different
registers depending on the current mode of the processor. This patch adds
the same orthogonality to the misc register file as the others (int, float, cc).
For all the othre ISAs this is currently a null-implementation.
Additionally, a system variable is added to all the ISA objects.
This patch add support for generating wake-up events in the CPU when an address
that is currently in the exclusive state is hit by a snoop. This mechanism is required
for ARMv8 multi-processor support.
This patch enables tracking of cache occupancy per thread along with
ages (in buckets) per cache blocks. Cache occupancy stats are
recalculated on each stat dump.
The probe patch is motivated by the desire to move analytical and trace code
away from functional code. This is achieved by the probe interface which is
essentially a glorified observer model.
What this means to users:
* add a probe point and a "notify" call at the source of an "event"
* add an isolated module, that is being used to carry out *your* analysis (e.g. generate a trace)
* register that module as a probe listener
Note: an example is given for reference in src/cpu/o3/simple_trace.[hh|cc] and src/cpu/SimpleTrace.py
What is happening under the hood:
* every SimObject maintains has a ProbeManager.
* during initialization (src/python/m5/simulate.py) first regProbePoints and
the regProbeListeners is called on each SimObject. this hooks up the probe
point notify calls with the listeners.
FAQs:
Why did you develop probe points:
* to remove trace, stats gathering, analytical code out of the functional code.
* the belief that probes could be generically useful.
What is a probe point:
* a probe point is used to notify upon a given event (e.g. cpu commits an instruction)
What is a probe listener:
* a class that handles whatever the user wishes to do when they are notified
about an event.
What can be passed on notify:
* probe points are templates, and so the user can generate probes that pass any
type of argument (by const reference) to a listener.
What relationships can be generated (1:1, 1:N, N:M etc):
* there isn't a restriction. You can hook probe points and listeners up in a
1:1, 1:N, N:M relationship. They become useful when a number of modules
listen to the same probe points. The idea being that you can add a small
number of probes into the source code and develop a larger number of useful
analysis modules that use information passed by the probes.
Can you give examples:
* adding a probe point to the cpu's commit method allows you to build a trace
module (outputting assembler), you could re-use this to gather instruction
distribution (arithmetic, load/store, conditional, control flow) stats.
Why is the probe interface currently restricted to passing a const reference:
* the desire, initially at least, is to allow an interface to observe
functionality, but not to change functionality.
* of course this can be subverted by const-casting.
What is the performance impact of adding probes:
* when nothing is actively listening to the probes they should have a
relatively minor impact. Profiling has suggested even with a large number of
probes (60) the impact of them (when not active) is very minimal (<1%).
Add some values and methods to the request object to track the translation
and access latency for a request and which level of the cache hierarchy responded
to the request.
This patch relaxes the check performed when squashing non-speculative
instructions, as it caused problems with loads that were marked ready,
and then stalled on a blocked cache. The assertion is now allowing
memory references to be non-faulting.
This patch removes an assertion in the simpoint profiling code that
asserts that a previously-seen basic block has the exact same number
of instructions executed as before. This can be false if the basic
block generates aborts or takes interrupts at different locations
within the basic block. The basic block profiling are not affected
significantly as these events are rare in general.
The performance counting framework in Linux 3.2 and onwards supports
an attribute to exclude events generated by the host when running
KVM. Setting this attribute allows us to get more reliable
measurements of the guest machine. For example, on a highly loaded
system, the instruction counts from the guest can be severely
distorted by the host kernel (e.g., by page fault handlers).
This changeset introduces a check for the attribute and enables it in
the KVM CPU if present.
This patch adds support for simulating with multiple threads, each of
which operates on an event queue. Each sim object specifies which eventq
is would like to be on. A custom barrier implementation is being added
using which eventqs synchronize.
The patch was tested in two different configurations:
1. ruby_network_test.py: in this simulation L1 cache controllers receive
requests from the cpu. The requests are replied to immediately without
any communication taking place with any other level.
2. twosys-tsunami-simple-atomic: this configuration simulates a client-server
system which are connected by an ethernet link.
We still lack the ability to communicate using message buffers or ports. But
other things like simulation start and end, synchronizing after every quantum
are working.
Committed by: Nilay Vaish
the current implementation of the fetch buffer in the o3 cpu
is only allowed to be the size of a cache line. some
architectures, e.g., ARM, have fetch buffers smaller than a cache
line, see slide 22 at:
http://www.arm.com/files/pdf/at-exploring_the_design_of_the_cortex-a15.pdf
this patch allows the fetch buffer to be set to values smaller
than a cache line.
This patch fixes an issue in the checker CPU register indexing. The
code will not even compile using LTO as deep inlining causes the used
index to be outside the array bounds.
Fix a problem in the O3 CPU for instructions that are both
memory loads and memory barriers (e.g. load acquire) and
to uncacheable memory. This combination can confuse the
commit stage into commitng an instruction that hasn't
executed and got it's value yet. At the same time refactor
the code slightly to remove duplication between two of
the cases.
LSQSenderState represents the LQ/SQ index using uint8_t, which supports up to
256 entries (including the sentinel entry). Sending packets to memory with a
higher index than 255 truncates the index, such that the response matches the
wrong entry. For instance, this can result in a deadlock if a store completion
does not clear the head entry.
This change fixes an issue in the O3 CPU where an uncachable instruction
is attempted to be executed before it reaches the head of the ROB. It is
determined to be uncacheable, and is replayed, but a PanicFault is attached
to the instruction to make sure that it is properly executed before
committing. If the TLB entry it was using is replaced in the interveaning
time, the TLB returns a delayed translation when the load is replayed at
the head of the ROB, however the LSQ code can't differntiate between the
old fault and the new one. If the translation isn't complete it can't
be faulting, so clear the fault.
When handling IPR accesses in doMMIOAccess, the KVM CPU used
clockEdge() to convert between cycles and ticks. This is incorrect
since doMMIOAccess is supposed to return a latency in ticks rather
than when the access is done. This changeset fixes this issue by
returning clockPeriod() * ipr_delay instead.
Convert condition code registers from being specialized
("pseudo") integer registers to using the recently
added CC register class.
Nilay Vaish also contributed to this patch.
Restructured rename map and free list to clean up some
extraneous code and separate out common code that can
be reused across different register classes (int and fp
at this point). Both components now consist of a set
of Simple* objects that are stand-alone rename map &
free list for each class, plus a Unified* object that
presents a unified interface across all register
classes and then redirects accesses to the appropriate
Simple* object as needed.
Moved free list initialization to PhysRegFile to better
isolate knowledge of physical register index mappings
to that class (and remove the need to pass a number
of parameters to the free list constructor).
Causes a small change to these stats:
cpu.rename.int_rename_lookups
cpu.rename.fp_rename_lookups
because they are now categorized on a per-operand basis
rather than a per-instruction basis.
That is, an instruction with mixed fp/int/misc operand
types will have each operand categorized independently,
where previously the lookup was categorized based on
the instruction type.
Make these names more meaningful.
Specifically, made these substitutions:
s/FP_Base_DepTag/FP_Reg_Base/g;
s/Ctrl_Base_DepTag/Misc_Reg_Base/g;
s/Max_DepTag/Max_Reg_Index/g;
It had a bunch of fields (and associated constructor
parameters) thet it didn't really use, and the array
initialization was needlessly verbose.
Also just hardwired the getReg() method to aleays
return true for misc regs, rather than having an array
of bits that we always kept marked as ready.
No need for PhysRegFile to be a template class, or
have a pointer back to the CPU. Also made some methods
for checking the physical register type (int vs. float)
based on the phys reg index, which will come in handy later.
The previous patch introduced a RegClass enum to clean
up register classification. The inorder model already
had an equivalent enum (RegType) that was used internally.
This patch replaces RegType with RegClass to get rid
of the now-redundant code.
Move from a poorly documented scheme where the mapping
of unified architectural register indices to register
classes is hardcoded all over to one where there's an
enum for the register classes and a function that
encapsulates the mapping.
This changset adds calls to the service the instruction event queues
that accidentally went missing from commit [0063c7dd18ec]. The
original commit only included the code needed to schedule instruction
stops from KVM and missed the functionality to actually service the
events.
Instruction events are currently ignored when executing in KVM. This
changeset adds support for triggering KVM exits based on instruction
counts using hardware performance counters. Depending on the
underlying performance counter implementation, there might be some
inaccuracies due to instructions being counted in the host kernel when
entering/exiting KVM.
Due to limitations/bugs in Linux's performance counter interface, we
can't reliably change the period of an overflow counter. We work
around this issue by detaching and reattaching the counter if we need
to reconfigure it.
This changeset adds support for synchronizing the FPU and SIMD state
of a virtual x86 CPU with gem5. It supports both the XSave API and the
KVM_(GET|SET)_FPU kernel API. The XSave interface can be disabled
using the useXSave parameter (in case of kernel
issues). Unfortunately, KVM_(GET|SET)_FPU interface seems to be buggy
in some kernels (specifically, the MXCSR register isn't always
synchronized), which means that it might not be possible to
synchronize MXCSR on old kernels without the XSave interface.
This changeset depends on the __float80 type in gcc and might not
build using llvm.
There are cases when the segment registers in gem5 are not compatible
with VMX. This changeset works around all known such issues. Specifically:
* The accessed bits in CS, SS, DD, ES, FS, GS are forced to 1.
* The busy bit in TR is forced to 1.
* The protection level of SS is forced to the same protection level as
CS. The difference /seems/ to be caused by a bug in gem5's x86
implementation.
This changeset adds support for KVM on x86. Full support is split
across a number of commits since some features are relatively
complex. This changeset includes support for:
* Integer state synchronization (including segment regs)
* CPUID (gem5's CPUID values are inserted into KVM)
* x86 legacy IO (remapped and handled by gem5's memory system)
* Memory mapped IO
* PCI
* MSRs
* State dumping
Most of the functionality is fairly straight forward. There are some
quirks to support PCI enumerations since this is done in the TLB(!) in
the simulated CPUs. We currently replicate some of that code.
Unlike the ARM implementation, the x86 implementation of the virtual
CPU does not use the cycles hardware counter. KVM on x86 simulates the
time stamp counter (TSC) in the kernel. If we just measure host cycles
using perfevent, we might end up measuring a slightly different number
of cycles. If we don't get the cycle accounting right, we might end up
rewinding the TSC, with all kinds of chaos as a result.
An additional feature of the KVM CPU on x86 is extended state
dumping. This enables Python scripts controlling the simulator to
request dumping of a subset of the processor state. The following
methods are currenlty supported:
* dumpFpuRegs
* dumpIntRegs
* dumpSpecRegs
* dumpDebugRegs
* dumpXCRs
* dumpXSave
* dumpVCpuEvents
* dumpMSRs
Known limitations:
* M5 ops are currently not supported.
* FPU synchronization is not supported (only affects CPU switching).
Both of the limitations will be addressed in separate commits.
The KVM base class incorrectly assumed that handleIprRead and
handleIprWrite both return ticks. This is not the case, instead they
return cycles. This changeset converts the returned cycles to ticks
when handling IPR accesses.
There is a possibility that the timespec used to arm a timer becomes
zero if the number of ticks used when arming a timer is close to the
resolution of the timer. Due to the semantics of POSIX timers, this
actually disarms the timer. This changeset fixes this issue by
eliminating the rounding error (we always round away from zero
now). It also reuses the minimum number of cycles, which were
previously only used for cycle-based timers, to calculate a more
useful resolution.
Previously, the LSQ would instantiate MaxThreads LSQUnits in the body of it's
object, but it would only initialize numThreads LSQUnits as specified by the
user. This had the effect of leaving some LSQUnits uninitialized when the
number of threads was less than MaxThreads, and when adding statistics to the
LSQUnit that must be initialized, this caused the stats initialization check to
fail. By dynamically instantiating LSQUnits, they are all initialized and this
avoids uninitialized LSQUnits from floating around during runtime.
This patch makes it possible to once again build gem5 without any
ISA. The main purpose is to enable work around the interconnect and
memory system without having to build any CPU models or device models.
The regress script is updated to include the NULL ISA target. Currently
no regressions make use of it, but all the testers could (and perhaps
should) transition to it.
--HG--
rename : build_opts/NOISA => build_opts/NULL
rename : src/arch/noisa/SConsopts => src/arch/null/SConsopts
rename : src/arch/noisa/cpu_dummy.hh => src/arch/null/cpu_dummy.hh
rename : src/cpu/intr_control.cc => src/cpu/intr_control_noisa.cc
The branch predictor is guarded by having either the in-order or
out-of-order CPU as one of the available CPU models and therefore
should not be used in the BaseCPU. This patch moves the parameter to
the relevant CPU classes.
This patch is a first step to getting NOISA working again. A number of
redundant includes make life more difficult than it has to be and this
patch simply removes them. There are also some redundant forward
declarations removed.
Added a couple missing updates to the notIdleFraction stat. Without
these, it sometimes gives a (not) idle fraction that is greater than 1
or less than 0.
This patch addresses an issue with trace playback in the TrafficGen
where the trace was reset but the header was not read from the trace
when a captured trace was played back for a second time. This resulted
in parsing errors as the expected message was not found in the trace
file.
The header check is moved to an init funtion which is called by the
constructor and when the trace is reset. This ensures that the trace
header is read each time when the trace is replayed.
This patch also addresses a small formatting issue in a panic.
This patch modifies the SimpleTimingCPU drain check to also consider
the fetch event. Previously, there was an assumption that there is
never a fetch event scheduled if the CPU is not executing
microcode. However, when a context is activated, a fetch even is
scheduled, and microPC() is zero.
This patch fixes a bug in the O3 fetch stage that was introduced when
the cache line size was moved to the system. By mistake, the
initialisation and resetting of the fetch stage was merged and put in
the constructor. The resetting is now re-added where it should be.
This patch removes the notion of a peer block size and instead sets
the cache line size on the system level.
Previously the size was set per cache, and communicated through the
interconnect. There were plenty checks to ensure that everyone had the
same size specified, and these checks are now removed. Another benefit
that is not yet harnessed is that the cache line size is now known at
construction time, rather than after the port binding. Hence, the
block size can be locally stored and does not have to be queried every
time it is used.
A follow-on patch updates the configuration scripts accordingly.
This patch adds the notion of source- and derived-clock domains to the
ClockedObjects. As such, all clock information is moved to the clock
domain, and the ClockedObjects are grouped into domains.
The clock domains are either source domains, with a specific clock
period, or derived domains that have a parent domain and a divider
(potentially chained). For piece of logic that runs at a derived clock
(a ratio of the clock its parent is running at) the necessary derived
clock domain is created from its corresponding parent clock
domain. For now, the derived clock domain only supports a divider,
thus ensuring a lower speed compared to its parent. Multiplier
functionality implies a PLL logic that has not been modelled yet
(create a separate clock instead).
The clock domains should be used as a mechanism to provide a
controllable clock source that affects clock for every clocked object
lying beneath it. The clock of the domain can (in a future patch) be
controlled by a handler responsible for dynamic frequency scaling of
the respective clock domains.
All the config scripts have been retro-fitted with clock domains. For
the System a default SrcClockDomain is created. For CPUs that run at a
different speed than the system, there is a seperate clock domain
created. This domain incorporates the CPU and the associated
caches. As before, Ruby runs under its own clock domain.
The clock period of all domains are pre-computed, such that no virtual
functions or multiplications are needed when calling
clockPeriod. Instead, the clock period is pre-computed when any
changes occur. For this to be possible, each clock domain tracks its
children.
This patch removes the explicit setting of the clock period for
certain instances of CoherentBus, NonCoherentBus and IOCache where the
specified clock is same as the default value of the system clock. As
all the values used are the defaults, there are no performance
changes. There are similar cases where the toL2Bus is set to use the
parent CPU clock which is already the default behaviour.
The main motivation for these simplifications is to ease the
introduction of clock domains.
This patch changes the IEW drain check to include the FU pool as there
can be instructions that are "stored" in FU completion events and thus
not covered by the existing checks. With this patch, we simply include
a check to see if all the FUs are considered non-busy in the next
tick.
Without this patch, the pc-switcheroo-full regression fails after
minor changes to the cache timing (aligning to clock edge).
Reuse the address finalization code in the TLB instead of replicating
it when handling MMIO. This patch also adds support for injecting
memory mapped IPR requests into the memory system.
This changeset adds the following stats to KVM:
* numVMHalfEntries: Number of entries into KVM to finalize pending
IO operations without executing guest instructions. These typically
happen as a result of a drain where the guest must finalize some
operations before the guest state is consistent.
* numExitSignal: Number of VM exits that have been triggered by a
signal. These usually happen as a result of the timer that limits
the time spent in KVM.
We used to use the KVM CPU's clock to specify the host frequency. This
was not ideal for several reasons. One of them being that the clock
parameter of a CPU determines the frequency of some of the components
connected to the CPU. This changeset adds a separate hostFreq
parameter that should be used to specify the host frequency until we
add code to autodetect it. The hostFactor should still be used to
specify the conversion factor between the host performance and that of
the simulated system.
We currently execute instructions in the guest and then handle any IO
request right after we break out of the virtualized environment. This
has the effect of executing IO requests in the exact same tick as the
first instruction in the sequence that was just run. There seem to be
cases where this simplification upsets some timing-sensitive devices.
This changeset splits execute and IO (and other services) across
multiple ticks. This is implemented by adding a separate
RunningService state to the CPU state machine. When a VM requires
service, it enters into this state and pending IO is then serviced in
the future instead of immediately. The delay between getting the
request and servicing it depends on the number of cycles executed in
the guest, which allows other components to catch up with the CPU.
Update the system's totalNumInst counter when exiting from KVM and
maintain an internal absolute instruction count instead of relying on
the one from perf.
Currently, the only way to get a CPU to stop after a fixed number of
instructions/loads is to set a property on the CPU that causes a
SimLoopExitEvent to be scheduled when the CPU is constructed. This is
clearly not ideal in cases where the simulation script wants the CPU
to stop at multiple instruction counts (e.g., SimPoint generation).
This changeset adds the methods scheduleInstStop() and
scheduleLoadStop() to the BaseCPU. These methods are exported to
Python and are designed to be used from the simulation script. By
using these methods instead of the old properties, a simulation script
can schedule a stop at any point during simulation or schedule
multiple stops. The number of instructions specified when scheduling a
stop is relative to the current point of execution.
Some architectures have special registers in the guest that can be
used to do cycle accounting. This is generally preferrable since the
prevents the guest from seeing a non-monotonic clock. This changeset
adds a virtual method, getHostCycles(), that the architecture-specific
code can override to implement this functionallity. The default
implementation uses the hwCycles counter.
timer_create can apparently return -1 and set errno to EAGAIN if the
kernel suffered a temporary failure when allocating a timer. This
happens from time to time, so we need to handle it.
It is now required to initialize the thread context by calling
startup() on it. Failing to do so currently causes decoder in
x86-based CPUs to get very confused when restoring from checkpoints.
This patch prunes the TraceCPU as the code is stale and the
functionality that it provided can now be achieved with the TrafficGen
using its trace playback mode.
The TraceCPU was able to play back pre-recorded memory traces of a few
different formats, and to achieve this level of flexibility with the
TrafficGen, use the util/encode_packet_trace (with suitable
modifications) to create a protobuf trace off-line.
Add a check which ensures that the minumum period for the LINEAR and
RANDOM traffic generator states is less than or equal to the maximum
period. If the minimum period is greater than the maximum period a
fatal is triggered.
This patch fixes a bug with the traffic generator which occured when
reading in the state transitions from the configuration
file. Previously, the size of the vector which stored the transitions
was used to get the size of the transitions matrix, rather than using
the number of states. Therefore, if there were more transitions than
states, i.e. some transitions has a probability of less than 1, then
the traffic generator would fatal when trying to check the
transitions.
This issue has been addressed by using the number of input states,
rather then the number of transitions.
This patch adds an optional request elasticity to the traffic
generator, effectievly compensating for it in the case of the linear
and random generators, and adding it in the case of the trace
generator. The accounting is left with the top-level traffic
generator, and the individual generators do the necessary math as part
of determining the next packet tick.
Note that in the linear and random generators we have to compensate
for the blocked time to not be elastic, i.e. without this patch the
aforementioned generators will slow down in the case of back-pressure.
This patch changes the queued port for a conventional master port and
stalls the traffic generator when requests are not immediately
accepted. This is a first step to allowing elasticity in the injection
of requests.
The patch also adds stats for the sent packets and retries, and
slightly changes how the nextPacketTick and getNextPacket
interact. The advancing of the trace is now moved to getNextPacket and
nextPacketTick is only responsible for answering the question when the
next packet should be sent.
This patch moves the responsibility for sending packets out of the
generator states and leaves it with the top-level traffic
generator. The main aim of this patch is to enable a transition to
non-queued ports, i.e. with send/retry flow control, and to do so it
is much more convenient to not wrap the port interactions and instead
leave it all local to the traffic generator.
The generator states now only govern when they are ready to send
something new, and the generation of the packets to send. They thus
have no knowledge of the port that is used.
This patch simplifies the object hierarchy of the traffic generator by
getting rid of the StateGraph class and folding this functionality
into the traffic generator itself.
The main goal of this patch is to facilitate upcoming changes by
reducing the number of affected layers.
This patch changes the type of the hash function for BasicBlockRanges
to match the original definition of the templatized type. Without
this, clang raises a warning and combined with the "-Werror" flag this
causes compilation to fail.
having separate params for the local/globalHistoryBits and the
local/globalPredictorSize can lead to inconsistencies if they
are not carefully set. this patch dervies the number of bits
necessary to index into the local/global predictors based on
their size.
the value of the localHistoryTableSize for the ARM O3 CPU has been
increased to 1024 from 64, which is more accurate for an A15 based
on some correlation against A15 hardware.
The CpuPort class was removed before the KVM patches were committed,
which means that the KVM interface currently doesn't compile. This
changeset adds the BaseKvmCPU::KVMCpuPort class which derives from
MasterPort. This class is used on the data and instruction ports
instead of the old CpuPort.
This changeset adds a 'numInsts' stat to the KVM-based CPU. It also
cleans up the variable names in kvmRun to make the distinction between
host cycles and estimated simulated cycles clearer. As a bonus
feature, it also fixes a warning (unreferenced variable) when
compiling in fast mode.
Add a debug print (when the Checkpoint debug flag is set) on serialize
and unserialize. Additionally, dump the KVM state before
serializing. The KVM state isn't dumped after unserializing since the
state is loaded lazily on the next KVM entry.
Device accesses are normally uncacheable. This change probably doesn't
make any difference since we normally disable caching when KVM is
active. However, there might be devices that check this, so we'd
better enable this flag to be safe.
This patch enables the use of the generator behaviours outside the
TrafficGen module. This is useful e.g. to allow packet replay modes
for other devices in the system without having to replace them with a
TrafficGen in the configuration files.
This change also enables more specific behaviours to be composed as
specific modules, e.g. BaseBandModem can use a number of generators
and have application-specific parameters based around a specific set
of generators.
This changeset adds support for m5 pseudo-ops when running in
kvm-mode. Unfortunately, we can't trap the normal gem5 co-processor
entry in KVM (it doesn't seem to be possible to trap accesses to
non-existing co-processors). We therefore use BZJ instructions to
cause a trap from virtualized mode into gem5. The BZJ instruction is
becomes a normal branch to the gem5 fallback code when running in
simulated mode, which means that this patch does not need to change
the ARM ISA-specific code.
Note: This requires a patched host kernel.
Architecture specific limitations:
* LPAE is currently not supported by gem5. We therefore panic if LPAE
is enabled when returning to gem5.
* The co-processor based interface to the architected timer is
unsupported. We can't support this due to limitations in the KVM
API on ARM.
* M5 ops are currently not supported. This requires either a kernel
hack or a memory mapped device that handles the guest<->m5
interface.
Add support for using the CPU cycle counter instead of a normal POSIX
timer to generate timed exits to gem5. This should, in theory, provide
better resolution when requesting timer signals.
The perf-based timer requires a fairly recent kernel since it requires
a working PERF_EVENT_IOC_PERIOD ioctl. This ioctl has existed in the
kernel for a long time, but it used to be completely broken due to an
inverted match when the kernel copied things from user
space. Additionally, the ioctl does not change the sample period
correctly on all kernel versions which implement it. It is currently
only known to work reliably on kernel version 3.7 and above on ARM.
Reduce the number of KVM->TC synchronizations by overloading the
getContext() method and only request an update when the TC is
requested as opposed to every time KVM returns to gem5.
This changeset introduces the architecture independent parts required
to support KVM-accelerated CPUs. It introduces two new simulation
objects:
KvmVM -- The KVM VM is a component shared between all CPUs in a shared
memory domain. It is typically instantiated as a child of the
system object in the simulation hierarchy. It provides access
to KVM VM specific interfaces.
BaseKvmCPU -- Abstract base class for all KVM-based CPUs. Architecture
dependent CPU implementations inherit from this class
and implement the following methods:
* updateKvmState() -- Update the
architecture-dependent KVM state from the gem5
thread context associated with the CPU.
* updateThreadContext() -- Update the thread context
from the architecture-dependent KVM state.
* dump() -- Dump the KVM state using (optional).
In order to deliver interrupts to the guest, CPU
implementations typically override the tick() method and
check for, and deliver, interrupts prior to entering
KVM.
Hardware-virutalized CPU currently have the following limitations:
* SE mode is not supported.
* PC events are not supported.
* Timing statistics are currently very limited. The current approach
simply scales the host cycles with a user-configurable factor.
* The simulated system must not contain any caches.
* Since cycle counts are approximate, there is no way to request an
exact number of cycles (or instructions) to be executed by the CPU.
* Hardware virtualized CPUs and gem5 CPUs must not execute at the
same time in the same simulator instance.
* Only single-CPU systems can be simulated.
* Remote GDB connections to the guest system are not supported.
Additionally, m5ops requires an architecture specific interface and
might not be supported.
Add the options 'panic_on_panic' and 'panic_on_oops' to the
LinuxArmSystem SimObject. When these option are enabled, the simulator
panics when the guest kernel panics or oopses. Enable panic on panic
and panic on oops in ARM-based test cases.
Previously, nextCycle() could return the *current* cycle if the current tick was
already aligned with the clock edge. This behavior is not only confusing (not
quite what the function name implies), but also caused problems in the
drainResume() function. When exiting/re-entering the sim loop (e.g., to take
checkpoints), the CPUs will drain and resume. Due to the previous behavior of
nextCycle(), the CPU tick events were being rescheduled in the same ticks that
were already processed before draining. This caused divergence from runs that
did not exit/re-entered the sim loop. (Initially a cycle difference, but a
significant impact later on.)
This patch separates out the two behaviors (nextCycle() and clockEdge()),
uses nextCycle() in drainResume, and uses clockEdge() everywhere else.
Nothing (other than name) should change except for the drainResume timing.
This patch is based on http://reviews.m5sim.org/r/1474/ originally written by
Mitch Hayenga. Basic block vectors are generated (simpoint.bb.gz in simout
folder) based on start and end addresses of basic blocks.
Some comments to the original patch are addressed and hooks are added to create
and resume from checkpoints based on instruction counts dictated by external
SimPoint analysis tools.
SimPoint creation/resuming options will be implemented as a separate patch.
This change fixes the switcheroo test that broke earlier this month. The code
that was checking for the pipeline being blocked wasn't checking for a pending
translation, only for a icache access.
Currently the commit stage keeps a local copy of the interrupt object.
Since the interrupt is usually handled several cycles after the commit
stage becomes aware of it, it is possible that the local copy of the
interrupt object may not be the interrupt that is actually handled.
It is possible that another interrupt occurred in the
interval between interrupt detection and interrupt handling.
This patch creates a copy of the interrupt just before the interrupt
is handled. The local copy is ignored.
This patch changes the port in the CPU classes to use MasterPort
instead of the derived CpuPort. The functions of the CpuPort are now
distributed across the relevant subclasses. The port accessor
functions (getInstPort and getDataPort) now return a MasterPort
instead of a CpuPort. This simplifies creating derivative CPUs that do
not use the CpuPort.
This patch comments out the inclusion of the inorder TLBUnit which is
only used in the 9-stage pipeline. With the TLBUnit present, gcc >=
4.6 in combination with LTO ends up throwing away the definition of
the TLBUnit destructor, and consequently fail to link. See
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=53808 for more details
about the bug, and http://gcc.gnu.org/ml/gcc/2012-06/msg00397.html for
the discussion thread that also touches on similar issues seen with
clang.
The traffic generator used to incorrectly determine the next state in
when state 0 had a non-zero probability. Due to the way the next
transition was determined, state 0 could never be entered other than
as an initial state. This changeset updates the transitition() method
to correctly handle such cases and cases where the transition matrix
is a 1x1 matrix.
This change fixes the switcheroo test that broke earlier this month. The code
that was checking for the pipeline being blocked wasn't checking for a pending
translation, only for a icache access.
This patch fixes the warnings that clang3.2svn emit due to the "-Wall"
flag. There is one case of an uninitialised value in the ARM neon ISA
description, and then a whole range of unused private fields that are
pruned.
This patch address the most important name shadowing warnings (as
produced when using gcc/clang with -Wshadow). There are many
locations where constructor parameters and function parameters shadow
local variables, but these are left unchanged.
This patch moves the 16x APIC clock divider to the Python code to
avoid the post-instantiation modifications to the clock. The x86 APIC
was the only object setting the clock after creation time and this
required some custom functionality and configuration. With this patch,
the clock multiplier is moved to the Python code and the objects are
instantiated with the appropriate clock.
This patch adds a predecessor field to the SenderState base class to
make the process of linking them up more uniform, and enable a
traversal of the stack without knowing the specific type of the
subclasses.
There are a number of simplifications done as part of changing the
SenderState, particularly in the RubyTest.
setMiscReg currently makes a new entry for each write to a misc reg without
checking for duplicates, this can cause a triggering of the assert if an
instruction get replayed and writes to the same misc regs multiple times.
This fix prevents duplicate entries and instead updates the value.
The rename can mis-handle serializing instructions (i.e. strex) if it gets
into a resource constrained situation and the serializing instruction has
to be placed on the skid buffer to handle blocking. In this situation the
instruction informs the pipeline it is serializing and logs that the next
instruction must be serialized, but since we are blocking the pipeline
defers this action to place the serializing instruction and
incoming instructions into the skid buffer. When resuming from blocking,
rename will pull the serializing instruction from the skid buffer and
the current logic will see this as the "next" instruction that has to
be serialized and because of flags set on the serializing instruction,
it passes through the pipeline stage as normal and resets rename to
non-serializing. This causes instructions to follow the serializing inst
incorrectly and eventually leads to an error in the pipeline. To fix this
rename should check first if it has to block before checking for serializing
instructions.
Fixes the tick used from rename:
- previously this gathered the tick on leaving rename which was always 1 less
than the dispatch. This conflated the decode ticks when back pressure built
in the pipeline.
- now picks up tick on entry.
Added --store_completions flag:
- will additionally display the store completion tail in the viewer.
- this highlights periods when large numbers of stores are outstanding (>16 LSQ
blocking)
Allows selection by tick range (previously this caused an infinite loop)
Virtualized CPUs and the fastmem mode of the atomic CPU require direct
access to physical memory. We currently require caches to be disabled
when using them to prevent chaos. This is not ideal when switching
between hardware virutalized CPUs and other CPU models as it would
require a configuration change on each switch. This changeset
introduces a new version of the atomic memory mode,
'atomic_noncaching', where memory accesses are inserted into the
memory system as atomic accesses, but bypass caches.
To make memory mode tests cleaner, the following methods are added to
the System class:
* isAtomicMode() -- True if the memory mode is 'atomic' or 'direct'.
* isTimingMode() -- True if the memory mode is 'timing'.
* bypassCaches() -- True if caches should be bypassed.
The old getMemoryMode() and setMemoryMode() methods should never be
used from the C++ world anymore.
CPUs need to test that the memory system is in the right mode in two
places, when the CPU is initialized (unless it's switched out) and on
a drainResume(). This led to some code duplication in the CPU
models. This changeset introduces the verifyMemoryMode() method which
is called by BaseCPU::init() if the CPU isn't switched out. The
individual CPU models are responsible for calling this method when
resuming from a drain as this code is CPU model specific.
Checker CPUs currently don't inherit from the CheckerCPU in the Python
object hierarchy. This has two consequences:
* It makes CPU model discovery from the Python world somewhat
complicated as there is no way of testing if a CPU is a checker.
* Parameters are duplicated in the checker configuration
specification.
This changeset makes all checker CPUs inherit from the base checker
CPU class.
The configuration scripts currently hard-code the requirements of each
CPU. This is clearly not optimal as it makes writing new configuration
scripts painful and adding new CPU models requires existing scripts to
be updated. This patch adds the following class methods to the base
CPU and all relevant CPUs:
* memory_mode -- Return a string describing the current memory mode
(invalid/atomic/timing).
* require_caches -- Does the CPU model require caches?
* support_take_over -- Does the CPU support CPU handover?
Fix a case in the O3 CPU where the decode stage blocks and unblocks in a
single cycle sending both signals to fetch which causes an assert or worse.
The previous check could never work before since the status was set to Blocked
before a test for the status being Unblocking was executed.
Check if an instruction just enabled interrupts and we've previously had an
interrupt pending that was not handled because interrupts were subsequently
disabled before the pipeline reached a place to handle the interrupt. In that
case squash now to make sure the interrupt is handled.
This patch moves the branch predictor files in the o3 and inorder directories
to src/cpu/pred. This allows sharing the branch predictor across different
cpu models.
This patch was originally posted by Timothy Jones in July 2010
but never made it to the repository.
--HG--
rename : src/cpu/o3/bpred_unit.cc => src/cpu/pred/bpred_unit.cc
rename : src/cpu/o3/bpred_unit.hh => src/cpu/pred/bpred_unit.hh
rename : src/cpu/o3/bpred_unit_impl.hh => src/cpu/pred/bpred_unit_impl.hh
rename : src/cpu/o3/sat_counter.hh => src/cpu/pred/sat_counter.hh
There was an issue w/ the rename logic, which would assign a previous physical
register to the ZeroReg architectural register in x86. This issue was giving
problems for instructions squashed in threads w/ ID different from 0,
sometimes allowing non-mispredicted instructions to obtain a value different
from zero when reading the zeroReg.
The changes made by the changeset 270c9a75e91f do not work well with switching
of cpus. The problem is that decoder for the old thread context holds state
that is not taken over by the new decoder.
This patch adds a takeOverFrom() function to Decoder class in each ISA. Except
for x86, functions in other ISAs are blank. For x86, the function copies state
from the old decoder to the new decoder.
Move the increment/decrement of wbOutstanding outside of the comparison
in incrWb and decrWb in the IEW. This also fixes a compiler bug with gcc
4.4.7, which incorrectly optimizes "-- ==" as "-=".
The changes made by the changeset 9376 were not quite correct. The patch made
changes to the code which resulted in decoder not getting initialized correctly
when the state was restored from a checkpoint.
This patch adds a startup function to each ISA object. For x86, this function
sets the required state in the decoder. For other ISAs, the function is empty
right now.
Cleanup the serialization code for the simple CPUs and the O3 CPU. The
CPU-specific code has been replaced with a (un)serializeThread that
serializes the thread state / context of a specific thread. Assuming
that the thread state class uses the CPU-specific thread state uses
the base thread state serialization code, this allows us to restore a
checkpoint with any of the CPU models.
This changeset inserts a TLB flush in BaseCPU::switchOut to prevent
stale translations when doing repeated switching. Additionally, the
TLB flushing functionality is exported to the Python to make debugging
of switching/checkpointing easier.
A simulation script will typically use the TLB flushing functionality
to generate a reference trace. The following sequence can be used to
simulate a handover (this depends on how drain is implemented, but is
generally the case) between identically configured CPU models:
m5.drain(test_sys)
[ cpu.flushTLBs() for cpu in test_sys.cpu ]
m5.resume(test_sys)
The generated trace should normally be identical to a trace generated
when switching between identically configured CPU models or
checkpointing and resuming.
Previously, the O3 CPU could stop in the middle of a microcode
sequence. This patch makes sure that the pipeline stops when it has
committed a normal instruction or exited from a microcode
sequence. Additionally, it makes sure that the pipeline has no
instructions in flight when it is drained, which should make draining
more robust.
Draining is controlled in the commit stage, which checks if the next
PC after a committed instruction is in microcode. If this isn't the
case, it requests a squash of all instructions after that the
instruction that just committed and immediately signals a drain stall
to the fetch stage. The CPU then continues to execute until the
pipeline and all associated buffers are empty.
Currently, the atomic CPU can be in the middle of a microcode sequence
when it is drained. This leads to two problems:
* When switching to a hardware virtualized CPU, we obviously can't
execute gem5 microcode.
* Since curMacroStaticInst is populated when executing microcode,
repeated switching between CPUs executing microcode leads to
incorrect execution.
After applying this patch, the CPU will be on a proper instruction
boundary, which means that it is safe to switch to any CPU model
(including hardware virtualized ones). This changeset fixes a bug
where the multiple switches to the same atomic CPU sometimes corrupts
the target state because of dangling pointers to the currently
executing microinstruction.
Note: This changeset moves tick event descheduling from switchOut() to
drain(), which makes timing consistent between just draining a system
and draining /and/ switching between two atomic CPUs. This makes
debugging quite a lot easier (execution traces get the same timing),
but the latency of the last instruction before a drain will not be
accounted for correctly (it will always be 1 cycle).
Note 2: This changeset removes so_state variable, the locked variable,
and the tickEvent from checkpoints since none of them contain state
that needs to be preserved across checkpoints. The so_state is made
redundant because we don't use the drain state variable anymore, the
lock variable should never be set when the system is drained, and the
tick event isn't scheduled.
Currently, the timing CPU can be in the middle of a microcode sequence
or multicycle (stayAtPC is true) instruction when it is drained. This
leads to two problems:
* When switching to a hardware virtualized CPU, we obviously can't
execute gem5 microcode.
* If stayAtPC is true we might execute half of an instruction twice
when restoring a checkpoint or switching CPUs, which leads to an
incorrect execution.
After applying this patch, the CPU will be on a proper instruction
boundary, which means that it is safe to switch to any CPU model
(including hardware virtualized ones). This changeset also fixes a bug
where the timing CPU sometimes switches out with while stayAtPC is
true, which corrupts the target state after a CPU switch or
checkpoint.
Note: This changeset removes the so_state variable from checkpoints
since the drain state isn't used anymore.
The thread context handover code used to break when multiple handovers
were performed during the same quiesce period. Previously, the thread
contexts would assign the TC pointer in the old quiesce event to the
new TC. This obviously broke in cases where multiple switches were
performed within the same quiesce period, in which case the TC pointer
in the quiesce event would point to an old CPU.
The new implementation deschedules pending quiesce events in the old
TC and schedules a new quiesce event in the new TC. The code has been
refactored to remove most of the code duplication.
Commit can currently both commit and squash in the same cycle. This
confuses other stages since the signals coming from the commit stage
can only signal either a squash or a commit in a cycle. This changeset
changes the behavior of squashAfter so that it commits all
instructions, including the instruction that requested the squash, in
the first cycle and then starts to squash in the next cycle.
The defer_registration parameter is used to prevent a CPU from
initializing at startup, leaving it in the "switched out" mode. The
name of this parameter (and the help string) is confusing. This patch
renames it to switched_out, which should be more descriptive.
This patch introduces the following sanity checks when switching
between CPUs:
* Check that the set of new and old CPUs do not overlap. Having an
overlap between the set of new CPUs and the set of old CPUs is
currently not supported. Doing such a switch used to result in the
following assertion error:
BaseCPU::takeOverFrom(BaseCPU*): \
Assertion `!new_itb_port->isConnected()' failed.
* Check that all new CPUs are in the switched out state.
* Check that all old CPUs are in the switched in state.
This patch cleans up the CPU switching functionality by making sure
that CPU models consistently call the parent on switchOut() and
takeOverFrom(). This has the following implications that might alter
current functionality:
* The call to BaseCPU::switchout() in the O3 CPU is moved from
signalDrained() (!) to switchOut().
* A call to BaseSimpleCPU::switchOut() is introduced in the simple
CPUs.
The O3 CPU used to copy its thread context to a SimpleThread in order
to do serialization. This was a bit of a hack involving two static
SimpleThread instances and a magic constructor that was only used by
the O3 CPU.
This patch moves the ThreadContext serialization code into two global
procedures that, in addition to the normal serialization parameters,
take a ThreadContext reference as a parameter. This allows us to reuse
the serialization code in all ThreadContext implementations.
The entire O3 pipeline used to be initialized from init(), which is
called before initState() or unserialize(). This causes the pipeline
to be initialized from an incorrect thread context. This doesn't
currently lead to correctness problems as instructions fetched from
the incorrect start PC will be squashed a few cycles after
initialization.
This patch will affect the regressions since the O3 CPU now issues its
first instruction fetch to the correct PC instead of 0x0.
Some architectures map registers differently depending on their mode
of operations. There is currently no architecture independent way of
accessing all registers. This patch introduces a flat register
interface to the ThreadContext class. This interface is useful, for
example, when serializing or copying thread contexts.
After making the ISA an independent SimObject, it is serialized
automatically by the Python world. Previously, this just resulted in
an empty ISA section. This patch moves the contents of the ISA to that
section and removes the explicit ISA serialization from the thread
contexts, which makes it behave like a normal SimObject during
serialization.
Note: This patch breaks checkpoint backwards compatibility! Use the
cpt_upgrader.py utility to upgrade old checkpoints to the new format.
This patch adds checks to all CPU models to make sure that the memory
system is in the correct mode at startup and when resuming after a
drain. Previously, we only checked that the memory system was in the
right mode when resuming. This is inadequate since this is a
configuration error that should be detected at startup as well as when
resuming. Additionally, since the check was done using an assert, it
wasn't performed when NDEBUG was set (e.g., the fast target).
This patch adds support for reading input traces encoded using
protobuf according to what is done in the CommMonitor.
A follow-up patch adds a Python script that can be used to convert the
previously used ASCII traces to protobuf equivalents. The appropriate
regression input is updated as part of this patch.
This patch encapsulates the traffic generator input in a stream class
such that the parsing is not visible to the trace generator. The
change takes us one step closer to using protobuf-based input traces
for the trace replay.
The functionality of the current input stream is identical to what it
was, and the ASCII format remains the same for now.
This patch fixes the computation that determines whether to perform a
read or a write such that the two corner cases (0 and 100) are both
more efficient and handled correctly.
The ISA class on stores the contents of ID registers on many
architectures. In order to make reset values of such registers
configurable, we make the class inherit from SimObject, which allows
us to use the normal generated parameter headers.
This patch introduces a Python helper method, BaseCPU.createThreads(),
which creates a set of ISAs for each of the threads in an SMT
system. Although it is currently only needed when creating
multi-threaded CPUs, it should always be called before instantiating
the system as this is an obvious place to configure ID registers
identifying a thread/CPU.
This patch unlocks the cpu-local monitor when the CPU sees a snoop to a locked
address. Previously we relied on the cache to handle the locking for us, however
some users on the gem5 mailing list reported a case where the cpu speculatively
executes a ll operation after a pending sc operation in the pipeline and that
makes the cache monitor valid. This should handle that case by invaliding the
local monitor.
isSyscall was originally created because during handling of a syscall in SE
mode the threadcontext had to be updated. However, in many places this is used
in FS mode (e.g. fault handlers) and the name doesn't make much sense. The
boolean actually stops gem5 from squashing speculative and non-committed state
when a write to a threadcontext happens, so re-name the variable to something
more appropriate
This interface is no longer used, and getting rid of it simplifies the
decoders and code that sets up the decoders. The thread context had been used
to read architectural state which was used to contextualize the instruction
memory as it came in. That was changed so that the state is now sent to the
decoders to keep locally if/when it changes. That's significantly more
efficient.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
The directed tester supports only generating only read or only write accesses. The
patch modifies the tester to support streams that have both read and write accesses.
globalHistoryBits, globalPredictorSize, and choicePredictorSize are decoupled.
globalHistoryBits controls how much history is kept, global and choice
predictor sizes control how much of that history is used when accessing
predictor tables. This way, global and choice predictors can actually be
different sizes, and it is no longer possible to walk off the predictor arrays
and cause a seg fault.
There are now individual thresholds for choice, global, and local saturating
counters, so that taken/not taken decisions are correct even when the
predictors' counters' sizes are different.
The interface for localPredictorSize has been removed from TournamentBP because
the value can be calculated from localHistoryBits.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
This patch moves the draining interface from SimObject to a separate
class that can be used by any object needing draining. However,
objects not visible to the Python code (i.e., objects not deriving
from SimObject) still depend on their parents informing them when to
drain. This patch also gets rid of the CountedDrainEvent (which isn't
really an event) and replaces it with a DrainManager.
SWIG needs a complete declaration of all wrapped objects. This patch
adds a header file with the DerivO3CPU class and includes it in the
SWIG interface.
--HG--
rename : src/cpu/o3/cpu_builder.cc => src/cpu/o3/deriv.cc
In order to create reliable SWIG wrappers, we need to include the
declaration of the wrapped class in the SWIG file. Previously, we
didn't expose the declaration of checker CPUs. This patch adds header
files for such CPUs and include them in the SWIG wrapper.
--HG--
rename : src/cpu/dummy_checker_builder.cc => src/cpu/dummy_checker.cc
rename : src/cpu/o3/checker_builder.cc => src/cpu/o3/checker.cc
When casting objects in the generated SWIG interfaces, SWIG uses
classical C-style casts ( (Foo *)bar; ). In some cases, this can
degenerate into the equivalent of a reinterpret_cast (mainly if only a
forward declaration of the type is available). This usually works for
most compilers, but it is known to break if multiple inheritance is
used anywhere in the object hierarchy.
This patch introduces the cxx_header attribute to Python SimObject
definitions, which should be used to specify a header to include in
the SWIG interface. The header should include the declaration of the
wrapped object. We currently don't enforce header the use of the
header attribute, but a warning will be generated for objects that do
not use it.
This patch enables dumping statistics and Linux process information on
context switch boundaries (__switch_to() calls) that are used for
Streamline integration (a graphical statistics viewer from ARM).
The Memtest tester allows for only one request to be outstanding for a
particular physical address. The check has been written separately for
reads and writes. This patch moves the check earlier than its current
position so that it need not be written separately for reads and writes.
This patch adds an additional level of ports in the inheritance
hierarchy, separating out the protocol-specific and protocl-agnostic
parts. All the functionality related to the binding of ports is now
confined to use BaseMaster/BaseSlavePorts, and all the
protocol-specific parts stay in the Master/SlavePort. In the future it
will be possible to add other protocol-specific implementations.
The functions used in the binding of ports, i.e. getMaster/SlavePort
now use the base classes, and the index parameter is updated to use
the PortID typedef with the symbolic InvalidPortID as the default.
This patch addresses a number of smaller issues identified by the code
inspection utility cppcheck. There are a number of identified leaks in
the arm/linux/system.cc (although the function only get's called once
so it is not a major problem), a few deletes in dev/x86/i8042.cc that
were not array deletes, and sprintfs where the character array had one
element less than needed. In the IIC tags there was a function
allocating an array of longs which is in fact never used.
This patch changes the CoherentBus between the L1s and L2 to use the
CPU clock and also four times the width compared to the default
bus. The parameters are not intending to fit every single scenario,
but rather serve as a better startingpoint than what we previously
had.
Note that the scripts that do not use the addTwoLevelCacheHiearchy are
not affected by this change.
A separate patch will update the stats.
This patch adds a traffic generator to the code base. The generator is
aimed to be used as a black box model to create appropriate use-cases
and benchmarks for the memory system, and in particular the
interconnect and the memory controller.
The traffic generator is a master module, where the actual behaviour
is captured in a state-transition graph where each state generates
some sort of traffic. By constructing a graph it is possible to create
very elaborate scenarios from basic generators. Currencly the set of
generators include idling, linear address sweeps, random address
sequences and playback of traces (recording will be done by the
Communication Monitor in a follow-up patch). At the moment the graph
and the states are described in an ad-hoc line-based format, and in
the future this should be aligned with our used of e.g. the Google
protobufs. Similarly for the traces, the format is currently a
simplistic ad-hoc line-based format that merely serves as a starting
point.
In addition to being used as a black-box model for system components,
the traffic generator is also useful for creating test cases and
regressions for the interconnect and memory system. In future patches
we will use the traffic generator to create DRAM test cases for the
controller model.
The patch following this one adds a basic regressions which also
contains an example configuration script and trace file for playback.
This patch takes the final plunge and transitions from the templated
Range class to the more specific AddrRange. In doing so it changes the
obvious Range<Addr> to AddrRange, and also bumps the range_map to be
AddrRangeMap.
In addition to the obvious changes, including the removal of redundant
includes, this patch also does some house keeping in preparing for the
introduction of address interleaving support in the ranges. The Range
class is also stripped of all the functionality that is never used.
--HG--
rename : src/base/range.hh => src/base/addr_range.hh
rename : src/base/range_map.hh => src/base/addr_range_map.hh
The profileEvent pointer is tested against NULL in various places, but
it is not initialized unless running in full-system mode. In SE mode, this
can result in segmentation faults when profileEvent default intializes to
something other than NULL.
This patch is a first step to using Cycles as a parameter type. The
main affected modules are the CPUs and the Ruby caches. There are
definitely plenty more places that are affected, but this patch serves
as a starting point to making the transition.
An important part of this patch is to actually enable parameters to be
specified as Param.Cycles which involves some changes to params.py.
This patch addresses the comments and feedback on the preceding patch
that reworks the clocks and now more clearly shows where cycles
(relative cycle counts) are used to express time.
Instead of bumping the existing patch I chose to make this a separate
patch, merely to try and focus the discussion around a smaller set of
changes. The two patches will be pushed together though.
This changes done as part of this patch are mostly following directly
from the introduction of the wrapper class, and change enough code to
make things compile and run again. There are definitely more places
where int/uint/Tick is still used to represent cycles, and it will
take some time to chase them all down. Similarly, a lot of parameters
should be changed from Param.Tick and Param.Unsigned to
Param.Cycles.
In addition, the use of curTick is questionable as there should not be
an absolute cycle. Potential solutions can be built on top of this
patch. There is a similar situation in the o3 CPU where
lastRunningCycle is currently counting in Cycles, and is still an
absolute time. More discussion to be had in other words.
An additional change that would be appropriate in the future is to
perform a similar wrapping of Tick and probably also introduce a
Ticks class along with suitable operators for all these classes.
This patch introduces the notion of a clock update function that aims
to avoid costly divisions when turning the current tick into a
cycle. Each clocked object advances a private (hidden) cycle member
and a tick member and uses these to implement functions for getting
the tick of the next cycle, or the tick of a cycle some time in the
future.
In the different modules using the clocks, changes are made to avoid
counting in ticks only to later translate to cycles. There are a few
oddities in how the O3 and inorder CPU count idle cycles, as seen by a
few locations where a cycle is subtracted in the calculation. This is
done such that the regression does not change any stats, but should be
revisited in a future patch.
Another, much needed, change that is not done as part of this patch is
to introduce a new typedef uint64_t Cycle to be able to at least hint
at the unit of the variables counting Ticks vs Cycles. This will be
done as a follow-up patch.
As an additional follow up, the thread context still uses ticks for
the book keeping of last activate and last suspend and this should
probably also be changed into cycles as well.
This patch tightens up the semantics around port binding and checks
that the ports that are being bound are currently not connected, and
similarly connected before unbind is called.
The patch consequently also changes the order of the unbind and bind
for the switching of CPUs to ensure that the rules are adhered
to. Previously the ports would be "over-written" without any check.
There are no changes in behaviour due to this patch, and the only
place where the unbind functionality is used is in the CPU.
This patch updates how the checker CPU handles the ports such that the
regressions will once again run without causing a panic.
A minor amount of tidying up was also done as part of this patch.
This patch removes the NACK frrom the packet as there is no longer any
module in the system that issues them (the bridge was the only one and
the previous patch removes that).
The handling of NACKs was mostly avoided throughout the code base, by
using e.g. panic or assert false, but in a few locations the NACKs
were actually dealt with (although NACKs never occured in any of the
regressions). Most notably, the DMA port will now never receive a NACK
and the backoff time is thus never changed. As a consequence, the
entire backoff mechanism (similar to a PCI bus) is now removed and the
DMA port entirely relies on the bus performing the arbitration and
issuing a retry when appropriate. This is more in line with e.g. PCIe.
Surprisingly, this patch has no impact on any of the regressions. As
mentioned in the patch that removes the NACK from the bridge, a
follow-up patch should change the request and response buffer size for
at least one regression to also verify that the system behaves as
expected when the bridge fills up.
This patch removes the overloading of the parameter, which seems both
redundant, and possibly incorrect.
The inorder CPU is particularly interesting as it uses a different
name for the parameter, and never make any use of it internally.
This patch makes the Tick unsigned and removes the UTick typedef. The
ticks should never be negative, and there was only one major issue
with removing it, caused by the o3 CPU using a -1 as an initial value.
The patch has no impact on any regressions.
This patch moves the clock of the CPU, bus, and numerous devices to
the new class ClockedObject, that sits in between the SimObject and
MemObject in the class hierarchy. Although there are currently a fair
amount of MemObjects that do not make use of the clock, they
potentially should do so, e.g. the caches should at some point have
the same clock as the CPU, potentially with a 1:n ratio. This patch
does not introduce any new clock objects or object hierarchies
(clusters, clock domains etc), but is still a step in the direction of
having a more structured approach clock domains.
The most contentious part of this patch is the serialisation of clocks
that some of the modules (but not all) did previously. This
serialisation should not be needed as the clock is set through the
parameters even when restoring from the checkpoint. In other words,
the state is "stored" in the Python code that creates the modules.
The nextCycle methods are also simplified and the clock phase
parameter of the CPU is removed (this could be part of a clock object
once they are introduced).
This patch fixes some problems with the drain/switchout functionality
for the O3 cpu and for the ARM ISA and adds some useful debug print
statements.
This is an incremental fix as there are still a few bugs/mem leaks with the
switchout code. Particularly when switching from an O3CPU to a
TimingSimpleCPU. However, when switching from O3 to O3 cores with the ARM ISA
I haven't encountered any more assertion failures; now the kernel will
typically panic inside of simulation.
This replaces a (potentially uninitialized) string
field with a virtual function so that we can have
a safe interface without requiring changes to the
eio code.
when using the checker i ran into problems where an instruction reading the
cpu id register failed because the ids did not match, and hence, the result
of the instruction did not match. this patch ensures that the ids match so
this instruction does not fail. this problem only seemed to manifest itself
when multiple cores were in the system, either multi-core, or extra switched-
out cores present in the system.
This patch is a first step to align the port names used in the Python
world and the C++ world. Ultimately it serves to make the use of
config.json together with output from the simulation easier, including
post-processing of statistics.
Most notably, the CPU, cache, and bus is addressed in this patch, and
there might be other ports that should be updated accordingly. The
dash name separator has also been replaced with a "." which is what is
used to concatenate the names in python, and a separation is made
between the master and slave port in the bus.
This patch is the last part of moving all protocol-related
functionality out of the Port base class. All the send/recv functions
are already moved, and the retry (which still governs all the timing
transport functions) is the only part that remained in the base class.
The only point where this currently causes a bit of inconvenience is
in the bus where the retry list is global and holds Port pointers (not
Master/SlavePort). This is about to change with the split into a
request/response bus and will soon be removed anyway.
The patch has no impact on any regressions.
This patch is the result of static analysis identifying a number of
memory leaks. The leaks are all benign as they are a result of not
deallocating memory in the desctructor. The fix still has value as it
removes false positives in the static analysis.
Add new flag (named pushedRAS) in the PredictorHistory structure.
This flag tracks whether the RAS has been pushed or not during a prediction.
Then, in the squash function it is used to pop the RAS if necessary.
initCPU() will be called to initialize switched out CPUs for the simple and
inorder CPU models. this patch prevents those CPUs from being initialized
because they should get their state from the active CPU when it is switched
out.
While FastAlloc provides a small performance increase (~1.5%) over regular malloc it isn't thread safe.
After removing FastAlloc and using tcmalloc I've seen a performance increase of 12% over libc malloc
when running twolf for ARM.
