Commit graph

351 commits

Author SHA1 Message Date
Nilay Vaish
3022d463fb ruby: interface with classic memory controller
This patch is the final in the series.  The whole series and this patch in
particular were written with the aim of interfacing ruby's directory controller
with the memory controller in the classic memory system.  This is being done
since ruby's memory controller has not being kept up to date with the changes
going on in DRAMs.  Classic's memory controller is more up to date and
supports multiple different types of DRAM.  This also brings classic and
ruby ever more close.  The patch also changes ruby's memory controller to
expose the same interface.
2014-11-06 05:42:21 -06:00
Ali Saidi
f2db2a96d1 arm, tests: Update config files to more recent kernels and create 64-bit regressions.
This changes the default ARM system to a Versatile Express-like system that supports
2GB of memory and PCI devices and updates the default kernels/file-systems for
AArch64 ARM systems (64-bit) to support up to 32GB of memory and PCI devices. Some
platforms that are no longer supported have been pruned from the configuration files.

In addition a set of 64-bit ARM regressions have been added to the regression system.
2014-10-29 23:18:27 -05:00
Ali Saidi
3a5c975fd7 arm: fix bare-metal memory setup.
The bare-metal configuration option still configured memory with the old scheme
that no-longer works. This change unifies the code so there aren't any differences.
2014-10-29 23:18:26 -05:00
Nilay Vaish
b80e574d01 config: separate function for instantiating a memory controller
This patch moves code for instantiating a single memory controller from
the function config_mem() to a separate function.  This is being done
so that memory controllers can be instantiated without assuming that
they will be attached to the system in a particular fashion.
2014-10-11 15:02:23 -05:00
Jiuyue Ma
e1a5522a89 config, x86: Ensure that PCI devs get bridged to the memory bus
This patch force IO device to be mapped to 0xC0000000-0xFFFF0000 by
reserve anything between the end of memory and 3GB if memory is less
than 3GB. It also statically bridge these address range to the IO bus,
which guaranty access to pci address space will pass though bridge to
iobus.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-07-17 12:05:41 +08:00
Jiuyue Ma
7d03bf4d6b config, x86: swap bus_id of ISA/PCI in X86 IntelMPTable
This patch assign bus_id=0 to PCI bus and bus_id=1 to ISA bus for
X86 platform. Because PCI device get config space address using
Pc::calcPciConfigAddr() which requires "assert(bus==0)".
This fixes PCI interrupt routing and discovery on Linux.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-07-17 11:00:12 +08:00
Andreas Hansson
1f6d5f8f84 mem: Rename Bus to XBar to better reflect its behaviour
This patch changes the name of the Bus classes to XBar to better
reflect the actual timing behaviour. The actual instances in the
config scripts are not renamed, and remain as e.g. iobus or membus.

As part of this renaming, the code has also been clean up slightly,
making use of range-based for loops and tidying up some comments. The
only changes outside the bus/crossbar code is due to the delay
variables in the packet.

--HG--
rename : src/mem/Bus.py => src/mem/XBar.py
rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc
rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh
rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc
rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh
rename : src/mem/bus.cc => src/mem/xbar.cc
rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 17:18:32 -04:00
Ali Saidi
1c0ae90027 arm: Support >2GB of memory for AArch64 systems 2014-09-03 07:43:05 -04:00
Ali Saidi
16262a8fc3 arm: Assume we have a kernel that supports pci devices
Change the default kernel for AArch64 and since it supports PCI devices
remove the hack that made it use CF. Unfortunately, there isn't really
a half-way here and we need to switch. Current users will get an error
message that the kernel isn't found and hopefully go download a new
kernel that supports PCI.
2014-09-03 07:43:04 -04:00
Geoffrey Blake
845e199934 config: Refactor RealviewEMM to fit into new config system
This eliminates some default devices and adds in helper functions
to connect the devices defined here to associate with the proper
clock domains.
2014-09-03 07:43:01 -04:00
Mitch Hayenga
976f27487b cpu: Change writeback modeling for outstanding instructions
As highlighed on the mailing list gem5's writeback modeling can impact
performance.  This patch removes the limitation on maximum outstanding issued
instructions, however the number that can writeback in a single cycle is still
respected in instToCommit().
2014-09-03 07:42:33 -04:00
Anthony Gutierrez
0ac4624595 arm: make the PseudoLRU tags the default for the O3_ARM_v7aL2
the Cortex-A15 has a random replacement policy for its L2 cache. see the
Cortex-A15 Technical Reference Manual 1.7 About the L2 memory system. this
patch makes the PseudoLRU tags the default for the ARM O3 CPU's L2 cache.
2014-07-28 12:22:00 -04:00
Andrew Bardsley
0e8a90f06b cpu: `Minor' in-order CPU model
This patch contains a new CPU model named `Minor'. Minor models a four
stage in-order execution pipeline (fetch lines, decompose into
macroops, decompose macroops into microops, execute).

The model was developed to support the ARM ISA but should be fixable
to support all the remaining gem5 ISAs. It currently also works for
Alpha, and regressions are included for ARM and Alpha (including Linux
boot).

Documentation for the model can be found in src/doc/inside-minor.doxygen and
its internal operations can be visualised using the Minorview tool
utils/minorview.py.

Minor was designed to be fairly simple and not to engage in a lot of
instruction annotation. As such, it currently has very few gathered
stats and may lack other gem5 features.

Minor is faster than the o3 model. Sample results:

     Benchmark     |   Stat host_seconds (s)
    ---------------+--------v--------v--------
     (on ARM, opt) | simple | o3     | minor
                   | timing | timing | timing
    ---------------+--------+--------+--------
    10.linux-boot  |   169  |  1883  |  1075
    10.mcf         |   117  |   967  |   491
    20.parser      |   668  |  6315  |  3146
    30.eon         |   542  |  3413  |  2414
    40.perlbmk     |  2339  | 20905  | 11532
    50.vortex      |   122  |  1094  |   588
    60.bzip2       |  2045  | 18061  |  9662
    70.twolf       |   207  |  2736  |  1036
2014-07-23 16:09:04 -05:00
Anthony Gutierrez
db267da822 arm: make the bi-mode predictor the default for O3_ARM_v7a_BP
the branch predictor used in the Cortex-A15 is a bi-mode style predictor,
see:

http://arm.com/files/pdf/at-exploring_the_design_of_the_cortex-a15.pdf
and
http://nvidia.com/docs/IO/116757/NVIDIA_Quad_a15_whitepaper_FINALv2.pdf

this patch makes the bi-mode predictor the default for the ARM O3 CPU.
2014-06-30 13:50:01 -04:00
Anthony Gutierrez
53dd4497b3 config: remove unecessary assignment of etherlink interfaces
in makeDualRoot() the etherlink interfaces are set using the tsunami interface
however, they are set again a few lines later based on whether or not the system
is a realview or tsunami system; the original assignment is always overwritten
or there will be a fatal. this seems like an artifact from when tsunami was the
only type of system capable of running with the dual option.
2014-05-15 13:26:31 -04:00
Anthony Gutierrez
5ab6bdc1ec arm: set default kernels for VExpress_EMM and VExpress_EMM64 2014-04-14 19:30:24 -04:00
Gedare Bloom
ca90a54476 config: add num-work-ids command line option
Adds the parameter --num-work-ids to Options.py and reads the parameter
into the System params in Simulation.py. This parameter enables setting
the number of possible work items to different than 16. Support for this
parameter already exists in src/sim/System.py, so this changeset only
affects the Python config files.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-04-10 13:43:33 -05:00
Andreas Hansson
7c18691db1 mem: Rename SimpleDRAM to a more suitable DRAMCtrl
This patch renames the not-so-simple SimpleDRAM to a more suitable
DRAMCtrl. The name change is intended to ensure that we do not send
the wrong message (although the "simple" in SimpleDRAM was originally
intended as in cleverly simple, or elegant).

As the DRAM controller modelling work is being presented at ISPASS'14
our hope is that a broader audience will use the model in the future.

--HG--
rename : src/mem/SimpleDRAM.py => src/mem/DRAMCtrl.py
rename : src/mem/simple_dram.cc => src/mem/dram_ctrl.cc
rename : src/mem/simple_dram.hh => src/mem/dram_ctrl.hh
2014-03-23 11:12:12 -04:00
Andreas Hansson
3dd1587afc mem: Change memory defaults to be more representative
Make the default memory type DDR3-1600 x64, and use the open-adaptive
page policy. This change is aiming to ensure that users by default are
using a realistic memory system.
2014-03-23 11:12:10 -04:00
Andreas Hansson
7e7b67472a mem: More descriptive address-mapping scheme names
This patch adds the row bits to the name of the address mapping
schemes to make it more clear that all the current schemes places the
row bits as the most significant bits.
2014-03-23 11:11:53 -04:00
Nilay Vaish
d5b5d89b34 config: remove ruby_fs.py
The patch removes the ruby_fs.py file.  The functionality is being moved to
fs.py.  This would being ruby fs simulations in line with how ruby se
simulations are started (using --ruby option).  The alpha fs config functions
are being combined for classing and ruby memory systems.  This required
renaming the piobus in ruby to iobus.  So, we will have stats being renamed
in the stats file for ruby fs regression.
2014-03-20 08:03:09 -05:00
Anthony Gutierrez
6b765ba8b7 arm: armv8 boot options to enable v8
Modifies FSConfig.py to enable ARMv8 compatibility.
To boot gem5 with ARMv8:
   Download the v8 kernel, .dtb file, and root FS from: http://gem5.org/Download
   Download the ARMv8 toolchain, and add the bin dir to your path:
       http://www.linaro.org/engineering/engineering-projects/armv8
   Build gem5 for ARM
   Build the v8 bootloader (in gem5/system/arm/aarch64_bootloader)
   Make script in gem5/system/arm/aarch64_bootloader will require v8 toolchain,
   drop the produced boot_emm.arm64 in $(M5_PATH)/binaries/
Run:
   $ build/ARM/gem5.fast configs/example/fs.py --machine-type=VExpress_EMM64 \
     --kernel=/path/to/kernel/vmlinux-linaro-tracking \
     --dtb-filename=/path/to/dtb/rtsm_ve-aemv8a.dtb \
     --disk-image=/path/to/img/linaro-minimal-armv8.img
2014-02-18 17:20:56 -05:00
Andreas Hansson
bf2f178f85 mem: Add a wrapped DRAMSim2 memory controller
This patch adds DRAMSim2 as a memory controller by wrapping the
external library and creating a sublass of AbstractMemory that bridges
between the semantics of gem5 and the DRAMSim2 interface.

The DRAMSim2 wrapper extracts the clock period from the config
file. There is no way of extracting this information from DRAMSim2
itself, so we simply read the same config file and get it from there.

To properly model the response queue, the wrapper keeps track of how
many transactions are in the actual controller, and how many are
stacking up waiting to be sent back as responses (in the wrapper). The
latter requires us to move away from the queued port and manage the
packets ourselves. This is due to DRAMSim2 not having any flow control
on the response path.

DRAMSim2 assumes that the transactions it is given are matching the
burst size of the choosen memory. The wrapper checks to ensure the
cache line size of the system matches the burst size of DRAMSim2 as
there are currently no provisions to split the system requests. In
theory we could allow a cache line size smaller than the burst size,
but that would lead to inefficient use of the DRAM, so for not we
fatal also in this case.
2014-02-18 05:50:53 -05:00
Nilay Vaish
7792dedfdd x86: add a warning about the number of memory controllers
When memory size > 3GB, print a warning that twice the number of memory
controllers would be created.
2014-01-28 07:15:53 -06:00
Nilay Vaish
95b782f600 config: allow more than 3GB of memory for x86 simulations
This patch edits the configuration files so that x86 simulations can have
more than 3GB of memory.  It also corrects a bug in the MemConfig.py script.
2014-01-27 18:50:51 -06:00
ARM gem5 Developers
612f8f074f arm: Add support for ARMv8 (AArch64 & AArch32)
Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli    (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt       (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole           (AArch64 NEON, validation)
Ali Saidi            (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang         (AArch64 Linux support)
Rene De Jong         (AArch64 Linux support, performance opt.)
Matt Horsnell        (AArch64 MP, validation)
Matt Evans           (device models, code integration, validation)
Chris Adeniyi-Jones  (AArch64 syscall-emulation)
Prakash Ramrakhyani  (validation)
Dam Sunwoo           (validation)
Chander Sudanthi     (validation)
Stephan Diestelhorst (validation)
Andreas Hansson      (code integration, performance opt.)
Eric Van Hensbergen  (performance opt.)
Gabe Black
2014-01-24 15:29:34 -06:00
Steve Reinhardt
a212844f67 config, x86: move kernel specification from tests to FSConfig.py
For some reason, the default x86 kernel is specified in
tests/configs/x86_generic.py and not in configs/common/FSConfig.py,
where the kernels for all the other ISAs are.  This means that
running configs/example/fs.py for x86 fails because no kernel
is specified.  Moving the specification over fixes this problem.

There is another problem that this uncovers, which is that going
past the init stage (i.e., past where the regression test stops)
fails because the fsck test on the disk device fails, but that's
a separate issue.
2014-01-03 17:08:44 -08:00
Anthony Gutierrez
8a53da22c2 cpu: allow the fetch buffer to be smaller than a cache line
the current implementation of the fetch buffer in the o3 cpu
is only allowed to be the size of a cache line. some
architectures, e.g., ARM, have fetch buffers smaller than a cache
line, see slide 22 at:
http://www.arm.com/files/pdf/at-exploring_the_design_of_the_cortex-a15.pdf

this patch allows the fetch buffer to be set to values smaller
than a cache line.
2013-11-15 13:21:15 -05:00
Dam Sunwoo
1e2a455a23 util: Streamline .apc project convertsion script
This Python script generates an ARM DS-5 Streamline .apc project based
on gem5 run. To successfully convert, the gem5 runs needs to be run
with the context-switch-based stats dump option enabled (The guest
kernel also needs to be patched to allow gem5 interrogate its task
information.) See help for more information.
2013-10-17 10:20:45 -05:00
Ali Saidi
735847179d arm, config: Fix a small issue with the dtb file being specified 2013-10-17 10:20:45 -05:00
Nilay Vaish
dbc3b2e86a config: correct example ruby scripts
A couple of recent changesets added/deleted/edited some variables
that are needed for running the example ruby scripts. This changeset
edits these scripts to bring them to a working state.
2013-10-09 17:28:14 -05:00
Andreas Sandberg
fec2dea5c3 x86: Add support for m5ops through a memory mapped interface
In order to support m5ops in virtualized environments, we need to use
a memory mapped interface. This changeset adds support for that by
reserving 0xFFFF0000-0xFFFFFFFF and mapping those to the generic IPR
interface for m5ops. The mapping is done in the
X86ISA::TLB::finalizePhysical() which means that it just works for all
of the CPU models, including virtualized ones.
2013-09-30 12:20:53 +02:00
Andreas Sandberg
f62119c77a config: Add a 'kvm' CPU alias
Add a CPU alias, 'kvm', for the first available KVM-accelerated CPU
model.
2013-09-30 09:45:43 +02:00
Joel Hestness
073b27c257 config: Initialize and check cpt_starttick
The previous changeset (9816) that fixes the use of max ticks introduced the
variable cpt_starttick, which is used for setting the relative max tick.
Unfortunately, with checkpointing at an instruction count or with simpoints,
the checkpoint tick is not stored conveniently, so to ensure that cpt_starttick
is initialized, set it to 0. Also, if using --rel-max-tick, check the use of
instruction counts or simpoints to warn the user that the max tick setting does
not include the checkpoint ticks.
2013-09-11 15:34:21 -05:00
Ali Saidi
e1b9c8c169 ARM: Fix configuration files for bare-metal binaries. 2013-08-26 10:58:06 -05:00
Andreas Hansson
c26911013c config: Command line support for multi-channel memory
This patch adds support for specifying multi-channel memory
configurations on the command line, e.g. 'se/fs.py
--mem-type=ddr3_1600_x64 --mem-channels=4'. To enable this, it
enhances the functionality of MemConfig and moves the existing
makeMultiChannel class method from SimpleDRAM to the support scripts.

The se/fs.py example scripts are updated to make use of the new
feature.
2013-08-19 03:52:34 -04:00
Akash Bagdia
e7e17f92db power: Add voltage domains to the clock domains
This patch adds the notion of voltage domains, and groups clock
domains that operate under the same voltage (i.e. power supply) into
domains. Each clock domain is required to be associated with a voltage
domain, and the latter requires the voltage to be explicitly set.

A voltage domain is an independently controllable voltage supply being
provided to section of the design. Thus, if you wish to perform
dynamic voltage scaling on a CPU, its clock domain should be
associated with a separate voltage domain.

The current implementation of the voltage domain does not take into
consideration cases where there are derived voltage domains running at
ratio of native voltage domains, as with the case where there can be
on-chip buck/boost (charge pumps) voltage regulation logic.

The regression and configuration scripts are updated with a generic
voltage domain for the system, and one for the CPUs.
2013-08-19 03:52:28 -04:00
Andreas Hansson
a8480fe1c3 config: Move the memory instantiation outside FSConfig
This patch moves the instantiation of the memory controller outside
FSConfig and instead relies on the mem_ranges to pass the information
to the caller (e.g. fs.py or one of the regression scripts). The main
motivation for this change is to expose the structural composition of
the memory system and allow more tuning and configuration without
adding a large number of options to the makeSystem functions.

The patch updates the relevant example scripts to maintain the current
functionality. As the order that ports are connected to the memory bus
changes (in certain regresisons), some bus stats are shuffled
around. For example, what used to be layer 0 is now layer 1.

Going forward, options will be added to support the addition of
multi-channel memory controllers.
2013-08-19 03:52:27 -04:00
Joel Hestness
7aa67f42cb Configs: Fix up maxtick and maxtime
This patch contains three fixes to max tick options handling in Options.py and
Simulation.py:

 1) Since the global simulator frequency isn't bound until m5.instantiate()
is called, the maxtick resolution needs to happen after this call, since
changes to the global frequency will cause m5.simulate() to misinterpret the
maxtick value. Shuffling this also requires tweaking the checkpoint directory
handling to signal the checkpoint restore tick back to run().  Fixing this
completely and correctly will require storing the simulation frequency into
checkpoints, which is beyond the scope of this patch.

 2) The maxtick option in Options.py was defaulted to MaxTicks, so the old code
would always skip over the maxtime part of the conditionals at the beginning
of run(). Change the maxtick default to None, and set the maxtick local
variable in run() appropriately.

 3) To clarify whether max ticks settings are relative or absolute, split the
maxtick option into separate options, for relative and absolute. Ensure that
these two options and the maxtime option are handled appropriately to set the
maxtick variable in Simulation.py.
2013-07-18 14:46:54 -05:00
Andreas Hansson
c20105c2ff config: Update script to set cache line size on system
This patch changes the config scripts such that they do not set the
cache line size per cache instance, but rather for the system as a
whole.
2013-07-18 08:31:19 -04:00
Nilay Vaish
516b7849e8 configs: rearrange the available options in Options.py
It also changes the instantiation of physmem in se.py so as to make
use of the memory size supplied by the mem_size option.
2013-06-28 21:42:26 -05:00
Akash Bagdia
7d7ab73862 sim: Add the notion of clock domains to all ClockedObjects
This patch adds the notion of source- and derived-clock domains to the
ClockedObjects. As such, all clock information is moved to the clock
domain, and the ClockedObjects are grouped into domains.

The clock domains are either source domains, with a specific clock
period, or derived domains that have a parent domain and a divider
(potentially chained). For piece of logic that runs at a derived clock
(a ratio of the clock its parent is running at) the necessary derived
clock domain is created from its corresponding parent clock
domain. For now, the derived clock domain only supports a divider,
thus ensuring a lower speed compared to its parent. Multiplier
functionality implies a PLL logic that has not been modelled yet
(create a separate clock instead).

The clock domains should be used as a mechanism to provide a
controllable clock source that affects clock for every clocked object
lying beneath it. The clock of the domain can (in a future patch) be
controlled by a handler responsible for dynamic frequency scaling of
the respective clock domains.

All the config scripts have been retro-fitted with clock domains. For
the System a default SrcClockDomain is created. For CPUs that run at a
different speed than the system, there is a seperate clock domain
created. This domain incorporates the CPU and the associated
caches. As before, Ruby runs under its own clock domain.

The clock period of all domains are pre-computed, such that no virtual
functions or multiplications are needed when calling
clockPeriod. Instead, the clock period is pre-computed when any
changes occur. For this to be possible, each clock domain tracks its
children.
2013-06-27 05:49:49 -04:00
Akash Bagdia
597d2aa3a6 config: Rename clock option to Ruby clock
This patch changes the 'clock' option to 'ruby-clock' as it is only
used by Ruby.
2013-06-27 05:49:49 -04:00
Akash Bagdia
076d04a653 config: Add a system clock command-line option
This patch adds a 'sys_clock' command-line option and use it to assign
clocks to the system during instantiation.

As part of this change, the default clock in the System class is
removed and whenever a system is instantiated a system clock value
must be set. A default value is provided for the command-line option.

The configs and tests are updated accordingly.
2013-06-27 05:49:49 -04:00
Akash Bagdia
4459b30525 config: Add a CPU clock command-line option
This patch adds a 'cpu_clock' command-line option and uses the value
to assign clocks to components running at the CPU speed (L1 and L2
including the L2-bus). The configuration scripts are updated
accordingly.

The 'clock' option is left unchanged in this patch as it is still used
by a number of components. In follow-on patches the latter will be
disambiguated further.
2013-06-27 05:49:49 -04:00
Andreas Sandberg
d989a3ad50 config: Add missing CPUs to --restore-with-cpu
The --restore-with-cpu option didn't use CpuConfig.cpu_names() to
determine which CPU names are valid, instead it used a static list of
known CPU names. This changeset makes the option parsing code use the
CPU list from the CpuConfig module instead.
2013-06-03 13:40:05 +02:00
Andreas Hansson
3bc4ecdcb4 mem: More descriptive DRAM config names
This patch changes the class names of the variuos DRAM configurations
to better reflect what memory they are based on. The speed and
interface width is now part of the name, and also the alias that is
used to select them on the command line.

Some minor changes are done to the actual parameters, to better
reflect the named configurations. As a result of these changes the
regressions change slightly and the stats will be bumped in a separate
patch.
2013-05-30 12:54:14 -04:00
Andreas Hansson
bf6291460d mem: Add a LPDDR3-1600 configuration
This patch adds a typical (leaning towards fast) LPDDR3 configuration
based on publically available data. As expected, it looks very similar
to the LPDDR2-S4 configuration, only with a slightly lower burst time.
2013-05-30 12:53:56 -04:00
Andreas Hansson
88aa7755f4 mem: Avoid explicitly zeroing the memory backing store
This patch removes the explicit memset as it is redundant and causes
the simulator to touch the entire space, forcing the host system to
allocate the pages.

Anonymous pages are mapped on the first access, and the page-fault
handler is responsible for zeroing them. Thus, the pages are still
zeroed, but we avoid touching the entire allocated space which enables
us to use much larger memory sizes as long as not all the memory is
actually used.
2013-05-30 12:53:54 -04:00
Anthony Gutierrez
d3c33d91b6 cpu: remove local/globalHistoryBits params from branch pred
having separate params for the local/globalHistoryBits and the
local/globalPredictorSize can lead to inconsistencies if they
are not carefully set. this patch dervies the number of bits
necessary to index into the local/global predictors based on
their size.

the value of the localHistoryTableSize for the ARM O3 CPU has been
increased to 1024 from 64, which is more accurate for an A15 based
on some correlation against A15 hardware.
2013-05-14 18:39:47 -04:00
Andreas Hansson
3477d60d5c config: Add a mem-type config option to se/fs scripts
This patch enables selection of the memory controller class through a
mem-type command-line option. Behind the scenes, this option is
treated much like the cpu-type, and a similar framework is used to
resolve the valid options, and translate the short-hand description to
a valid class.

The regression scripts are updated with a hardcoded memory class for
the moment. The best solution going forward is probably to get the
memory out of the makeSystem functions, but Ruby complicates things as
it does not connect the memory controller to the membus.

--HG--
rename : configs/common/CpuConfig.py => configs/common/MemConfig.py
2013-04-22 13:20:33 -04:00
Dam Sunwoo
2c1e344313 cpu: generate SimPoint basic block vector profiles
This patch is based on http://reviews.m5sim.org/r/1474/ originally written by
Mitch Hayenga. Basic block vectors are generated (simpoint.bb.gz in simout
folder) based on start and end addresses of basic blocks.

Some comments to the original patch are addressed and hooks are added to create
and resume from checkpoints based on instruction counts dictated by external
SimPoint analysis tools.

SimPoint creation/resuming options will be implemented as a separate patch.
2013-04-22 13:20:31 -04:00
Joel Hestness
82c6734f6b Configs: Fix handling of maxtick and take_checkpoints
In Simulation.py, calls to m5.simulate(num_ticks) will run the simulated system
for num_ticks after the current tick. Fix calls to m5.simulate in
scriptCheckpoints() and benchCheckpoints() to appropriately handle the maxticks
variable.
2013-04-09 16:25:30 -05:00
Nilay Vaish
433cab9d95 x86: create space in bios memory map
As of now, we mark the top 1MB of memory space as unusable. Part of
it is actually usable and is required to be marked so by some of the
newer versions of linux kernel. This patch marks the top 639KB as usable.
This value was chosen by looking at QEMU's output for bios memory map.
2013-03-28 09:34:15 -05:00
Nilay Vaish
546ffb2d6d config: return exit event instead of cause
changeset: a4739b6f799d made some changes that where an exit event
should have been returned in place of exit cause. This patch corrects
the error.
2013-03-22 17:31:24 -05:00
Ali Saidi
82cf1565d0 config: Fix --prog-interval command line option 2013-02-20 08:18:22 -05:00
Anthony Gutierrez
21aa950318 options: add command line option for dtb file 2013-02-15 18:48:59 -05:00
Andreas Sandberg
1c7aa665bf config: Remove O3 dependencies
The default cache configuration script currently import the O3_ARM_v7a
model configuration, which depends on the O3 CPU. This breaks if gem5
has been compiled without O3 support. This changeset removes the
dependency by only importing the model if it is requested by the
user. As a bonus, it actually removes some code duplication in the
configuration scripts.
2013-02-15 17:40:08 -05:00
Andreas Sandberg
e5dca84c3f config: Move CPU handover logic to m5.switchCpus()
CPU switching consists of the following steps:
 1. Drain the system
 2. Switch out old CPUs (cpu.switchOut())
 3. Change the system timing mode to the mode the new CPUs require
 4. Flush caches if switching to hardware virtualization
 5. Inform new CPUs of the handover (cpu.takeOverFrom())
 6. Resume the system

m5.switchCpus() previously only did step 2 & 5. Since information
about the new processors' memory system requirements is now exposed,
do all of the steps above.

This patch adds automatic memory system switching and flush (if
needed) to switchCpus(). Additionally, it adds optional draining to
switchCpus(). This has the following implications:

* changeToTiming and changeToAtomic are no longer needed, so they have
  been removed.

* changeMemoryMode is only used internally, so it is has been renamed
  to be private.

* switchCpus requires a reference to the system containing the CPUs as
  its first parameter.

WARNING: This changeset breaks compatibility with existing
configuration scripts since it changes the signature of
m5.switchCpus().
2013-02-15 17:40:08 -05:00
Andreas Sandberg
e9f66dceac config: Cleanup CPU configuration
The CPUs supported by the configuration scripts used to be
hard-coded. This was not ideal for several reasons. For example, the
configuration scripts depend on all CPU models even though only a
subset might have been compiled.

This changeset adds a new module to the configuration scripts that
automatically discovers the available CPU models from the compiled
SimObjects. As a nice bonus, the use of introspection allows us to
automatically generate a list of available CPU models suitable for
printing. This list is augmented with the Python doc string from the
underlying class if available.
2013-02-15 17:40:08 -05:00
Andreas Sandberg
7cd1fd4324 cpu: Add CPU metadata om the Python classes
The configuration scripts currently hard-code the requirements of each
CPU. This is clearly not optimal as it makes writing new configuration
scripts painful and adding new CPU models requires existing scripts to
be updated. This patch adds the following class methods to the base
CPU and all relevant CPUs:

 * memory_mode -- Return a string describing the current memory mode
                  (invalid/atomic/timing).

 * require_caches -- Does the CPU model require caches?

 * support_take_over -- Does the CPU support CPU handover?
2013-02-15 17:40:08 -05:00
Andreas Sandberg
6155400421 config: Don't call sys.exit in interactive mode in run()
The run() method in Simulation.py used to call sys.exit() when the
simulator exits. This is undesirable when user has requested the
simulator to be run in interactive mode since it causes the simulator
to exit rather than entering the interactive Python environment.
2013-02-10 13:23:54 +01:00
Andreas Hansson
c4898b15bc mem: Add DDR3 and LPDDR2 DRAM controller configurations
This patch moves the default DRAM parameters from the SimpleDRAM class
to two different subclasses, one for DDR3 and one for LPDDR2. More can
be added as we go forward.

The regressions that previously used the SimpleDRAM are now using
SimpleDDR3 as this is the most similar configuration.
2013-01-31 07:49:14 -05:00
Nilay Vaish ext:(%2C%20Timothy%20Jones%20%3Ctimothy.jones%40cl.cam.ac.uk%3E)
dbeabedaf0 branch predictor: move out of o3 and inorder cpus
This patch moves the branch predictor files in the o3 and inorder directories
to src/cpu/pred. This allows sharing the branch predictor across different
cpu models.

This patch was originally posted by Timothy Jones in July 2010
but never made it to the repository.

--HG--
rename : src/cpu/o3/bpred_unit.cc => src/cpu/pred/bpred_unit.cc
rename : src/cpu/o3/bpred_unit.hh => src/cpu/pred/bpred_unit.hh
rename : src/cpu/o3/bpred_unit_impl.hh => src/cpu/pred/bpred_unit_impl.hh
rename : src/cpu/o3/sat_counter.hh => src/cpu/pred/sat_counter.hh
2013-01-24 12:28:51 -06:00
Ali Saidi
fe3fbe624e config: Fix issue with changeset: a4739b6f799d. 2013-01-08 17:12:22 -05:00
Lluís Vilanova
807168a1de util: add m5_fail op.
Used as a command in full-system scripts helps the user ensure the benchmarks have finished successfully.

For example, one can use:

    /path/to/benchmark args || /sbin/m5 fail 1

and thus ensure gem5 will exit with an error if the benchmark fails.
2013-01-08 08:54:12 -05:00
Andreas Sandberg
2cfe62adc4 cpu: Rename defer_registration->switched_out
The defer_registration parameter is used to prevent a CPU from
initializing at startup, leaving it in the "switched out" mode. The
name of this parameter (and the help string) is confusing. This patch
renames it to switched_out, which should be more descriptive.
2013-01-07 13:05:45 -05:00
Andreas Hansson
e65de3f5ca config: Do not use hardcoded physmem in fs script
This patch generalises the address range resolution for the I/O cache
and I/O bridge such that they do not assume a single memory. The patch
involves adding a parameter to the system which is then defined based
on the memories that are to be visible from the I/O subsystem, whether
behind a cache or a bridge.

The change is needed to allow interleaved memory controllers in the
system.
2013-01-07 13:05:38 -05:00
Erik Tomusk
3dc7e4f496 TournamentBP: Fix some bugs with table sizes and counters
globalHistoryBits, globalPredictorSize, and choicePredictorSize are decoupled.
globalHistoryBits controls how much history is kept, global and choice
predictor sizes control how much of that history is used when accessing
predictor tables. This way, global and choice predictors can actually be
different sizes, and it is no longer possible to walk off the predictor arrays
and cause a seg fault.

There are now individual thresholds for choice, global, and local saturating
counters, so that taken/not taken decisions are correct even when the
predictors' counters' sizes are different.

The interface for localPredictorSize has been removed from TournamentBP because
the value can be calculated from localHistoryBits.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2012-12-06 09:31:06 -06:00
Andreas Hansson
13f6d29a76 config: Fix description of checkpoint option from cycle to tick
This patch merely updates the description of the "take-checkpoints"
option to reflect that it is specified in ticks and not in cycles.
2012-11-19 11:21:09 -05:00
Andreas Sandberg
dc01535c7e python: Rename doDrain()->drain() and make it do the right thing
There is no point in exporting the old drain() method in
Simulate.py. It should only be used internally by doDrain(). This
patch moves the old drain() method into doDrain() and renames
doDrain() to drain().
2012-11-02 11:32:02 -05:00
Andreas Sandberg
7e25052fee Partly revert [4f54b0f229b5] and move draining to m5.changeToTiming
Changeset 4f54b0f229b5 removed the call to doDrain in changeToTiming
based on the assumption that the system does not need draining when
running in atomic mode. This is a false assumption since at least the
System class requires the system to be drained before it allows
switching of memory modes. This patch reverts that part of the
changeset.
2012-11-02 11:32:00 -05:00
Andreas Hansson
9cbe1cb653 config: Unify caches used in regressions and adjust L2 MSHRs
This patch unified the L1 and L2 caches used throughout the
regressions instead of declaring different, but very similar,
configurations in the different scripts.

The patch also changes the default L2 configuration to match what it
used to be for the fs and se scripts (until the last patch that
updated the regressions to also make use of the cache config). The
MSHRs and targets per MSHR are now set to a more realistic default of
20 and 12, respectively.

As a result of both the aforementioned changes, many of the regression
stats are changed. A follow-on patch will bump the stats.
2012-10-30 07:44:08 -04:00
Andreas Hansson
651de2d9af config: Fix the cache class naming in regression scripts
This patch unifies the naming of the default L1 and L2 caches in the
regression configs to be in line with what is used in the se and fs
scripts.
2012-10-26 06:42:42 -04:00
Andreas Hansson
66e331c7bb config: Use SimpleDRAM in full-system, and with o3 and inorder
This patch favours using SimpleDRAM with the default timing instead of
SimpleMemory for all regressions that involve the o3 or inorder CPU,
or are full system (in other words, where the actual performance of
the memory is important for the overall performance).

Moving forward, the solution for FSConfig and the users of fs.py and
se.py is probably something similar to what we use to choose the CPU
type. I envision a few pre-set configurations SimpleLPDDR2,
SimpleDDR3, etc that can be choosen by a dram_type option. Feedback on
this part is welcome.

This patch changes plenty stats and adds all the DRAM controller
related stats. A follow-on patch updates the relevant statistics. The
total run-time for the entire regression goes up with ~5% with this
patch due to the added complexity of the SimpleDRAM model. This is a
concious trade-off to ensure that the model is properly tested.
2012-10-25 13:14:38 -04:00
Andreas Hansson
d22796c03c config: Use shared cache config for regressions
This patch uses the common L1, L2 and IOCache configuration for the
regressions that all share the same cache parameters. There are a few
regressions that use a slightly different configuration (memtest,
o3-timing=mp, simple-atomic-mp and simple-timing-mp), and the latter
are not changed in this patch. They will be updated in a future patch.

The common cache configurations are changed to match the ones used in
the regressions, and are slightly changed with respect to what they
were. Hopefully this means we can converge on a common base
configuration, used both in the normal user configurations and
regressions.

As only regressions that shared the same cache configuration are
updated, no regressions are affected.
2012-10-25 04:32:44 -04:00
Andreas Hansson
88554790c3 Mem: Use cycles to express cache-related latencies
This patch changes the cache-related latencies from an absolute time
expressed in Ticks, to a number of cycles that can be scaled with the
clock period of the caches. Ultimately this patch serves to enable
future work that involves dynamic frequency scaling. As an immediate
benefit it also makes it more convenient to specify cache performance
without implicitly assuming a specific CPU core operating frequency.

The stat blocked_cycles that actually counter in ticks is now updated
to count in cycles.

As the timing is now rounded to the clock edges of the cache, there
are some regressions that change. Plenty of them have very minor
changes, whereas some regressions with a short run-time are perturbed
quite significantly. A follow-on patch updates all the statistics for
the regressions.
2012-10-15 08:10:54 -04:00
Andreas Hansson
1c321b8847 Regression: Use CPU clock and 32-byte width for L1-L2 bus
This patch changes the CoherentBus between the L1s and L2 to use the
CPU clock and also four times the width compared to the default
bus. The parameters are not intending to fit every single scenario,
but rather serve as a better startingpoint than what we previously
had.

Note that the scripts that do not use the addTwoLevelCacheHiearchy are
not affected by this change.

A separate patch will update the stats.
2012-10-15 08:08:08 -04:00
Mrinmoy Ghosh
6fc0094337 Cache: add a response latency to the caches
In the current caches the hit latency is paid twice on a miss. This patch lets
a configurable response latency be set of the cache for the backward path.
2012-09-25 11:49:41 -05:00
Andreas Hansson
fccbf8bb45 AddrRange: Simplify AddrRange params Python hierarchy
This patch simplifies the Range object hierarchy in preparation for an
address range class that also allows striping (e.g. selecting a few
bits as matching in addition to the range).

To extend the AddrRange class to an AddrRegion, the first step is to
simplify the hierarchy such that we can make it as lean as possible
before adding the new functionality. The only class using Range and
MetaRange is AddrRange, and the three classes are now collapsed into
one.
2012-09-19 06:15:41 -04:00
Joel Hestness
234fa4cf7e Standard Switch: Drain the system before switching CPUs
When switching from an atomic CPU to any of the timing CPUs, a drain is
unnecessary since no events are scheduled in atomic mode. However, when
trying to switch CPUs starting with a timing CPU, there may be events
scheduled. This change ensures that all events are drained from the system
by calling m5.drain before switching CPUs.
2012-09-12 21:41:37 -05:00
Andreas Hansson
9ad7e23e9e Checkpoint: Pass maxtick to avoid undefined variable
This patch fixes a bug in scriptCheckpoints, where maxtick was used
undefined. The bug caused checkpointing by means of --take-checkpoints
to fail.
2012-09-11 14:14:51 -04:00
Nilay Vaish
0b45ae5df3 se.py: support specifying multiple programs via command line
This patch allows for specifying multiple programs via command line. It also
adds an option for specifying whether to use of SMT. But SMT does not work for
the o3 cpu as of now.
2012-09-09 09:33:45 -05:00
Andreas Hansson
a6074016e2 Bridge: Remove NACKs in the bridge and unify with packet queue
This patch removes the NACKing in the bridge, as the split
request/response busses now ensure that protocol deadlocks do not
occur, i.e. the message-dependency chain is broken by always allowing
responses to make progress without being stalled by requests. The
NACKs had limited support in the system with most components ignoring
their use (with a suitable call to panic), and as the NACKs are no
longer needed to avoid protocol deadlocks, the cleanest way is to
simply remove them.

The bridge is the starting point as this is the only place where the
NACKs are created. A follow-up patch will remove the code that deals
with NACKs in the endpoints, e.g. the X86 table walker and DMA
port. Ultimately the type of packet can be complete removed (until
someone sees a need for modelling more complex protocols, which can
now be done in parts of the system since the port and interface is
split).

As a consequence of the NACK removal, the bridge now has to send a
retry to a master if the request or response queue was full on the
first attempt. This change also makes the bridge ports very similar to
QueuedPorts, and a later patch will change the bridge to use these. A
first step in this direction is taken by aligning the name of the
member functions, as done by this patch.

A bit of tidying up has also been done as part of the simplifications.

Surprisingly, this patch has no impact on any of the
regressions. Hence, there was never any NACKs issued. In a follow-up
patch I would suggest changing the size of the bridge buffers set in
FSConfig.py to also test the situation where the bridge fills up.
2012-08-22 11:39:58 -04:00
Andreas Hansson
4ebefc145a Checkpoint: Fix broken checkpointing functionality
This patch fixes the checkpointing by ensuring that the directory is
passer to the scriptCheckpoints function, and that the num_checkpoints
is not used before it is initialised.
2012-08-21 05:48:52 -04:00
Anthony Gutierrez
5a648f2074 configs: add option for repeatedly switching back-and-forth between cpu types.
This patch adds a --repeat-switch option that will enable repeat core
switching at a user defined period (set with --switch-freq option).
currently, a switch can only occur between like CPU types. inorder CPU
switching is not supported.

*note*
this patch simply allows a config that will perform repeat switching, it
does not fix drain/switchout functionality. if you run with repeat switching
you will hit assertion failures and/or your workload with hang or die.
2012-08-15 10:38:07 -04:00
Nilay Vaish
62425b7a07 Simulation.py: move code related to checkpointing to functions
This patch moves the code related to checkpointing from the run() function to
several different functions. The aim is to make the code more manageable. No
functionality changes are expected, but since the code is kind of unruly, it
is possible that some change might have creeped in.
2012-08-06 18:14:32 -05:00
Nilay Vaish
d81a51a4c8 Config: change how cpu class is set
This changes the way in which the cpu class while restoring from a checkpoint
is set. Earlier it was assumed if cpu type with which to restore is not same
as the cpu type with the which to run the simulation, then the checkpoint
should be restored with the atomic cpu. This assumption is being dropped. The
checkpoint can now be restored with any cpu type, the default being atomic cpu.
2012-08-06 18:14:31 -05:00
Andreas Hansson
ae6ab7c03c Config: Use clock option in se/fs script and pass to switch_cpus
This patch changes the se and fs script to use the clock option and
not simply set the CPUs clock to 2 GHz. It also makes a minor change
to the assignment of the switch_cpus clock to allow different clocks.
2012-07-23 09:32:22 -04:00
Anthony Gutierrez
ce9ac38342 configs: add run scripts for ics/gb versions of android and bbench
1) Modifies Benchmarks.py to add support for Android ICS and BBench on Android ICS.

2) An rcS script is added for BBench on ICS.

3) Separates benchmark entries and rcS scripts for GB/ICS

4) Removes the debugging output from the existing BBench run script. These
   print statements were used for debugging and they seemed to confuse users
   into believing they should see some terminal output.
2012-06-11 11:07:42 -04:00
Nilay Vaish
51c23e601e Config: Remove setMipsOptions
As status matrix, MIPS fs does not work. Hence, these options are not
required. Secondly, the function is setting param values for a CPU class.
This seems strange, should probably be done in a different way.
2012-06-07 08:05:30 -05:00
Nilay Vaish
78a72d6972 Config: changes to a couple of error msgs 2012-06-07 08:05:30 -05:00
Andreas Hansson
0d32940711 Bus: Split the bus into a non-coherent and coherent bus
This patch introduces a class hierarchy of buses, a non-coherent one,
and a coherent one, splitting the existing bus functionality. By doing
so it also enables further specialisation of the two types of buses.

A non-coherent bus connects a number of non-snooping masters and
slaves, and routes the request and response packets based on the
address. The request packets issued by the master connected to a
non-coherent bus could still snoop in caches attached to a coherent
bus, as is the case with the I/O bus and memory bus in most system
configurations. No snoops will, however, reach any master on the
non-coherent bus itself. The non-coherent bus can be used as a
template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses,
and is typically used for the I/O buses.

A coherent bus connects a number of (potentially) snooping masters and
slaves, and routes the request and response packets based on the
address, and also forwards all requests to the snoopers and deals with
the snoop responses. The coherent bus can be used as a template for
modelling QPI, HyperTransport, ACE and coherent OCP buses, and is
typically used for the L1-to-L2 buses and as the main system
interconnect.

The configuration scripts are updated to use a NoncoherentBus for all
peripheral and I/O buses.

A bit of minor tidying up has also been done.

--HG--
rename : src/mem/bus.cc => src/mem/coherent_bus.cc
rename : src/mem/bus.hh => src/mem/coherent_bus.hh
rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc
rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 13:30:04 -04:00
Jayneel Gandhi
39cbae9581 Config: Fix help msg for option --mem-size 2012-05-03 05:17:29 -05:00
Jayneel Gandhi
b5b9d2ad3e Config: Add command line options for disk image and memory size
Added the options to Options.py for FS mode with backward compatibility. It is
good to provide an option to specify the disk image and the memory size from
command line since a lot of disk images are created to support different
benchmark suites as well as per user needs. Change in program also leads to
change in memory requirements. These options provide the interface to provide
both disk image and memory size from the command line and gives more
flexibility.
2012-04-16 17:51:26 -05:00
Andreas Hansson
b00949d88b MEM: Enable multiple distributed generalized memories
This patch removes the assumption on having on single instance of
PhysicalMemory, and enables a distributed memory where the individual
memories in the system are each responsible for a single contiguous
address range.

All memories inherit from an AbstractMemory that encompasses the basic
behaviuor of a random access memory, and provides untimed access
methods. What was previously called PhysicalMemory is now
SimpleMemory, and a subclass of AbstractMemory. All future types of
memory controllers should inherit from AbstractMemory.

To enable e.g. the atomic CPU and RubyPort to access the now
distributed memory, the system has a wrapper class, called
PhysicalMemory that is aware of all the memories in the system and
their associated address ranges. This class thus acts as an
infinitely-fast bus and performs address decoding for these "shortcut"
accesses. Each memory can specify that it should not be part of the
global address map (used e.g. by the functional memories by some
testers). Moreover, each memory can be configured to be reported to
the OS configuration table, useful for populating ATAG structures, and
any potential ACPI tables.

Checkpointing support currently assumes that all memories have the
same size and organisation when creating and resuming from the
checkpoint. A future patch will enable a more flexible
re-organisation.

--HG--
rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py
rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py
rename : src/mem/physical.cc => src/mem/abstract_mem.cc
rename : src/mem/physical.hh => src/mem/abstract_mem.hh
rename : src/mem/physical.cc => src/mem/simple_mem.cc
rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 13:46:31 -04:00
Nilay Vaish
4f4a710457 Config: corrects the way Ruby attaches to the DMA ports
With recent changes to the memory system, a port cannot be assigned a peer
port twice. While making use of the Ruby memory system in FS mode, DMA
ports were assigned peer twice, once for the classic memory system
and once for the Ruby memory system. This patch removes this double
assignment of peer ports.
2012-04-05 11:09:19 -05:00
Nilay Vaish
390cfc7be9 Config: Change the way options are added
I am not too happy with the way options are added in files se.py and fs.py
currently. This patch moves all the options to the file Options.py, functions
from which are called when required.
2012-03-28 11:01:53 -05:00
Nilay Vaish
6ca3af8ecf Config: Move setWorkCountOptions() to Simulation.py
The function is presently defined in FSConfig.py, which does not seem to be
the correct place for it.
2012-03-27 18:23:21 -05:00
Nilay Vaish
13a5e9b7b5 FSConfig.py: fix a typo makeLinuxAlphaRubySystem 2012-03-16 07:46:45 -05:00