Commit graph

767 commits

Author SHA1 Message Date
Nilay Vaish
99fb8f8140 stats: changes to due to recent set of patches 2015-03-09 09:39:09 -05:00
Steve Reinhardt
4b048901cf stats: update eio stats
Minor differences apparently from recent changes
2015-03-07 13:55:56 -05:00
Andreas Hansson
8909843a76 stats: Update stats to reflect cache and interconnect changes
This is a bulk update of stats to match the changes to cache timing,
interconnect timing, and a few minor changes to the o3 CPU.
2015-03-02 05:04:20 -05:00
Andreas Hansson
36dc93a5fa mem: Move crossbar default latencies to subclasses
This patch introduces a few subclasses to the CoherentXBar and
NoncoherentXBar to distinguish the different uses in the system. We
use the crossbar in a wide range of places: interfacing cores to the
L2, as a system interconnect, connecting I/O and peripherals,
etc. Needless to say, these crossbars have very different performance,
and the clock frequency alone is not enough to distinguish these
scenarios.

Instead of trying to capture every possible case, this patch
introduces dedicated subclasses for the three primary use-cases:
L2XBar, SystemXBar and IOXbar. More can be added if needed, and the
defaults can be overridden.
2015-03-02 04:00:47 -05:00
Andreas Hansson
eed0795f3a tests: Run regression timeout as foreground
Allow the user to send signals such as Ctrl C to the gem5 runs. Note
that this assumes coreutils >= 8.13, which aligns with Ubuntu 12.04
and RHE6.
2015-03-02 04:00:29 -05:00
Andreas Hansson
acf5a4a3da stats: Bump the MemTest regression stats
Reflect changes in the tester behaviour.
2015-02-11 10:23:31 -05:00
Andreas Hansson
6563ec8634 cpu: Tidy up the MemTest and make false sharing more obvious
The MemTest class really only tests false sharing, and as such there
was a lot of old cruft that could be removed. This patch cleans up the
tester, and also makes it more clear what the assumptions are. As part
of this simplification the reference functional memory is also
removed.

The regression configs using MemTest are updated to reflect the
changes, and the stats will be bumped in a separate patch. The example
config will be updated in a separate patch due to more extensive
re-work.

In a follow-on patch a new tester will be introduced that uses the
MemChecker to implement true sharing.
2015-02-11 10:23:28 -05:00
Andreas Hansson
fc8cb1fa76 stats: Update stats to reflect x86 table walker changes 2015-01-22 05:00:57 -05:00
Andreas Hansson
de162ad968 tests: Remove deprecated InOrderCPU tests
This patch removes the three MIPS and SPARC regressions that use the
deprecated InOrderCPU.

This is the first step in completely removing the code from the tree,
avoiding confusion, and focusing all development efforts on the
MinorCPU. Brave new world.
2015-01-20 08:12:02 -05:00
Nilay Vaish
e76442e203 stats: changes due to recent changesets. 2015-01-10 18:06:43 -06:00
Gabe Black
d0284544ec stats: x86: Update stats for the CPUID change. 2015-01-07 00:31:09 -08:00
Nilay Vaish
e979e8d75e stats: changes due to recent changesets. 2015-01-04 13:02:12 -06:00
Andreas Hansson
df8df4fd0a stats: Bump stats for decoder, TLB, prefetcher and DRAM changes
Changes due to speculative execution of an unaligned PC, introduction
of TLB stats, changes and re-work of the prefetcher, and the
introduction of rank-wise refresh in the DRAM controller.
2014-12-23 09:31:20 -05:00
Andreas Hansson
e76e8e28a3 tests: Add a regression for the stack distance calculator
Re-use the existing traffic generator regression, and enable the stack
distance calculation in the comm monitor, along with the verification
stack.

The traffic generator config is also tuned to not increase the
run-time too much (and actually have some address re-use).
2014-12-23 09:31:18 -05:00
Andreas Hansson
6489598fb4 stats: Bump stats for fixes, mostly TLB and WriteInvalidate 2014-12-02 06:08:25 -05:00
Andreas Hansson
726f626e87 stats: Bump stats for o3 LSQ changes 2014-12-02 06:08:05 -05:00
Andreas Hansson
b0aa5a326d stats: Bump stats after static analysis fixes
Fixing up the uninitialised values changes two of the x86 Linux boot
regressions slightly.
2014-11-24 09:03:39 -05:00
Gabe Black
2d2a5aa410 x86: Update stats for the new Linux delay port. 2014-11-21 17:22:19 -08:00
Gabe Black
994c44035d x86: Update the stats for the x86 FS o3 boot test. 2014-11-17 00:16:36 -08:00
Andreas Hansson
4583a5114a stats: Bump regressions to match latest changes
Updates after timezone hick-up and sorting of dictionary items in the
SimObject.
2014-11-12 09:05:25 -05:00
Nilay Vaish
02b4605da0 stats: changes to x86 o3 fs and sparc fs regression tests. 2014-11-11 14:17:10 -06:00
Marc Orr
3947f88d0f tests: A test program for the new mwait implementation.
This is a simple test program for the new mwait implemenation. It is uses
m5threads to create to threads of execution in syscall emulation mode that
interact using the mwait instruction.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-11-06 05:42:21 -06:00
Nilay Vaish
a75e27b4a6 stats: updates due to changes to ruby 2014-11-06 05:42:21 -06:00
Nilay Vaish
3022d463fb ruby: interface with classic memory controller
This patch is the final in the series.  The whole series and this patch in
particular were written with the aim of interfacing ruby's directory controller
with the memory controller in the classic memory system.  This is being done
since ruby's memory controller has not being kept up to date with the changes
going on in DRAMs.  Classic's memory controller is more up to date and
supports multiple different types of DRAM.  This also brings classic and
ruby ever more close.  The patch also changes ruby's memory controller to
expose the same interface.
2014-11-06 05:42:21 -06:00
Nilay Vaish
95a0b18431 ruby: single physical memory in fs mode
Both ruby and the system used to maintain memory copies.  With the changes
carried for programmed io accesses, only one single memory is required for
fs simulations.  This patch sets the copy of memory that used to reside
with the system to null, so that no space is allocated, but address checks
can still be carried out.  All the memory accesses now source and sink values
to the memory maintained by ruby.
2014-11-06 05:41:44 -06:00
Ali Saidi
ae82551496 tests: Update stats no match.
Bootloader I had on my sytem was an older version with a couple of
instruction differences.
2014-11-03 10:14:42 -06:00
Ali Saidi
2c2c3a4ce9 arm, tests: Forgot the system.terminal files for the new regressions. 2014-10-30 00:04:12 -05:00
Ali Saidi
29cd50e14e arm, tests: Add 64-bit ARM regression tests 2014-10-29 23:50:15 -05:00
Ali Saidi
93c0307d41 tests: Update regressions for the new kernels and various preceeding fixes. 2014-10-29 23:18:29 -05:00
Ali Saidi
f2db2a96d1 arm, tests: Update config files to more recent kernels and create 64-bit regressions.
This changes the default ARM system to a Versatile Express-like system that supports
2GB of memory and PCI devices and updates the default kernels/file-systems for
AArch64 ARM systems (64-bit) to support up to 32GB of memory and PCI devices. Some
platforms that are no longer supported have been pruned from the configuration files.

In addition a set of 64-bit ARM regressions have been added to the regression system.
2014-10-29 23:18:27 -05:00
Nilay Vaish
d2a0f60b69 stats: updates due to previous mmap and exit_group patches. 2014-10-20 16:48:19 -05:00
Andreas Hansson
a63ba6c7b7 stats: Small bump of trailing stats
Somehow these seem to have been missed.
2014-10-16 05:49:31 -04:00
Nilay Vaish
1efe42fa97 stats: updates due to changes to x86, stale configs. 2014-10-11 16:18:51 -05:00
Andreas Hansson
0746e92cd3 stats: Add DRAM power statistics to reference output 2014-10-09 17:52:13 -04:00
Andreas Hansson
ff2d58f935 stats: Update stats to reflect ARM fixes
As a result of the fixes, the full-system dual-core ARM regressions
are slightly changed. Hopefully this also means there will no longer
be any discrepancies between the results observed on different hosts.
2014-09-28 16:53:48 -04:00
Steve Reinhardt
71d5f03175 stats: update t1000 stats for recent changes 2014-09-21 23:04:39 -04:00
Steve Reinhardt
8649757135 stats: update eio stats for recent changes 2014-09-21 16:15:14 -04:00
Andreas Hansson
c4e91289ae stats: Bump stats for filter, crossbar and config changes
This patch bumps the stats to reflect the addition of the snoop filter
and snoop stats, the change from bus to crossbar, and the updates to
the ARM regressions that are now using a different CPU and cache
configuration. Lastly, some minor changes are expected due to the
activation cleanup of the CPUs.
2014-09-20 17:18:53 -04:00
Andreas Hansson
2b0438a11e tests: Use more representative configs for ARM tests
This patch changes the CPU and cache configurations used in the ARM SE and FS
regressions to make them more representative, and also get better code
coverage by exercising different replacement policies and use an L2
prefetcher.
2014-09-20 17:18:33 -04:00
Andreas Hansson
1f6d5f8f84 mem: Rename Bus to XBar to better reflect its behaviour
This patch changes the name of the Bus classes to XBar to better
reflect the actual timing behaviour. The actual instances in the
config scripts are not renamed, and remain as e.g. iobus or membus.

As part of this renaming, the code has also been clean up slightly,
making use of range-based for loops and tidying up some comments. The
only changes outside the bus/crossbar code is due to the delay
variables in the packet.

--HG--
rename : src/mem/Bus.py => src/mem/XBar.py
rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc
rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh
rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc
rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh
rename : src/mem/bus.cc => src/mem/xbar.cc
rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 17:18:32 -04:00
Andreas Hansson
1884bcc03b tests: Add a memtest version using the ideal SnoopFilter
This patch adds a basic regression test for the snoop filter.

--HG--
rename : tests/configs/memtest.py => tests/configs/memtest-filter.py
2014-09-20 17:18:30 -04:00
Curtis Dunham
e553ca67d4 tests: automatically kill regressions that take too long
When GNU coreutils 'timeout' is available, limit each regression
simulation to 4 hours.
2014-08-25 14:32:00 -05:00
Andreas Hansson
8d18713d28 stats: Minor update of Minor stats after uncacheable fix 2014-09-12 10:22:50 -04:00
Andreas Hansson
a217eba078 stats: Update stats for CPU and cache changes
This patch updates the stats to reflect the fixes and changes to the
CPU (mainly the o3), and the caches.
2014-09-03 07:42:59 -04:00
Andreas Hansson
db430698bf tests: Use medium dataset for perlbmk regressions
This patch changes the perlbmk regression script from the large to the
medium dataset to reduce the regression run time. For all ISAs and CPU
models, the total perlbmk host CPU time with the large dataset is
roughly 12 hours (constituting >30% of the total regression host
time). There is, most likely, almost no added value in terms of code
coverage for this rather excessive run time.
2014-09-03 07:42:57 -04:00
Andreas Hansson
351e146b37 alpha: Stop using 'inorder' and rely entirely on 'minor'
This patch avoids building the 'inorder' CPU model for any permutation
of ALPHA, and also removes the ALPHA regressions using the 'inorder'
CPU. The 'minor' CPU is already providing a broader test coverage.
2014-09-03 07:42:56 -04:00
Andreas Hansson
ee68c2b302 tests: Use O3_ARM_v7a config for full-system ARM regressions
This patch changes the CPU configuration used for the full-system ARM
regressions to increase the test coverage. Note that it is only the
core configuration, and not the caches etc.
2014-09-03 07:42:41 -04:00
Nilay Vaish
fa1fbcf020 stats: updates due to recent ruby and x86 changes
Also updates many out of date config files.
2014-09-01 16:55:52 -05:00
Emilio Castillo ext:(%2C%20Nilay%20Vaish%20%3Cnilay%40cs.wisc.edu%3E)
01f792a367 ruby: Fixes clock domains in configuration files
This patch fixes scripts related to ruby by adding the ruby clock domain.
Now the L1 controllers and  the Sequencer shares the cpu clock domain,
while the rest of the components use the ruby clock domain.

Before this patch, running simulations with the cpu clock set at 2GHz or
1GHz will output the same time results and could distort power measurements.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-09-01 16:55:30 -05:00
Andreas Hansson
cbf417c713 stats: Bump stats for the regressions using the minor CPU
Updating the stats to match the current behaviour.
2014-07-28 01:48:21 -04:00
Andrew Bardsley
5d0b25ba3f cpu: Minor CPU add regression tests for ARM and ALPHA
This patch adds regression tests results and test harnesses
for the Minor CPU on ARM and ALPHA.
2014-07-23 16:09:05 -05:00
Steve Reinhardt
040fa23d01 stats: update for syscall DPRINTF change
Only printing one rather than two args for the ignored syscall
warning means the count of register accesses has changed on
a few runs.  Oddly only Alpha Tru64 seems to have any ignored
syscalls in the regression tests.
2014-07-19 19:04:58 -07:00
Steve Reinhardt
5b08e211ab stats: update for O3 changes
Mostly small differences in total ticks, but O3 stall causes
shifted significantly.

30.eon does speed up by ~6% on Alpha and ARM, and 50.vortex
by 4.5% on ARM.  At the other extreme, X86 70.twolf is 0.8%
slower.
2014-06-22 14:33:09 -07:00
Nilay Vaish
2a8088f5ae stats: changes due to recent o3 patch. 2014-05-24 21:30:46 -05:00
Nilay Vaish
0aaa7d10d8 stats: changes due to o3 cpu and ruby message buffer patches 2014-05-23 06:07:02 -05:00
Steve Reinhardt
72403cb595 tests: update t1000 & pc-switcheroo-full stats
committed reference config.json files too
2014-05-12 17:22:17 -04:00
Steve Reinhardt
2136feaa55 tests: update eio ref outputs for new stats
Also committed reference config.json files for
the eio tests.
2014-05-10 22:13:51 -04:00
Andreas Hansson
57e5401d95 stats: Bump stats for the fixes, and mostly DRAM controller changes 2014-05-09 18:58:50 -04:00
Andreas Hansson
64806c4c13 tests: Reflect name change in DRAM tests
This patch reflects the recent name change in the DRAM TrafficGen
tests and also tidies up the test directory.

--HG--
rename : tests/configs/tgen-simple-dram.py => tests/configs/tgen-dram-ctrl.py
rename : tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/config.ini => tests/quick/se/70.tgen/ref/null/none/tgen-dram-ctrl/config.ini
rename : tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/simerr => tests/quick/se/70.tgen/ref/null/none/tgen-dram-ctrl/simerr
rename : tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/simout => tests/quick/se/70.tgen/ref/null/none/tgen-dram-ctrl/simout
rename : tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/stats.txt => tests/quick/se/70.tgen/ref/null/none/tgen-dram-ctrl/stats.txt
rename : tests/quick/se/70.tgen/tgen-simple-dram.cfg => tests/quick/se/70.tgen/tgen-dram-ctrl.cfg
2014-05-09 18:58:49 -04:00
Curtis Dunham
fe27f937aa arch: teach ISA parser how to split code across files
This patch encompasses several interrelated and interdependent changes
to the ISA generation step.  The end goal is to reduce the size of the
generated compilation units for instruction execution and decoding so
that batch compilation can proceed with all CPUs active without
exhausting physical memory.

The ISA parser (src/arch/isa_parser.py) has been improved so that it can
accept 'split [output_type];' directives at the top level of the grammar
and 'split(output_type)' python calls within 'exec {{ ... }}' blocks.
This has the effect of "splitting" the files into smaller compilation
units.  I use air-quotes around "splitting" because the files themselves
are not split, but preprocessing directives are inserted to have the same
effect.

Architecturally, the ISA parser has had some changes in how it works.
In general, it emits code sooner.  It doesn't generate per-CPU files,
and instead defers to the C preprocessor to create the duplicate copies
for each CPU type.  Likewise there are more files emitted and the C
preprocessor does more substitution that used to be done by the ISA parser.

Finally, the build system (SCons) needs to be able to cope with a
dynamic list of source files coming out of the ISA parser. The changes
to the SCons{cript,truct} files support this. In broad strokes, the
targets requested on the command line are hidden from SCons until all
the build dependencies are determined, otherwise it would try, realize
it can't reach the goal, and terminate in failure. Since build steps
(i.e. running the ISA parser) must be taken to determine the file list,
several new build stages have been inserted at the very start of the
build. First, the build dependencies from the ISA parser will be emitted
to arch/$ISA/generated/inc.d, which is then read by a new SCons builder
to finalize the dependencies. (Once inc.d exists, the ISA parser will not
need to be run to complete this step.) Once the dependencies are known,
the 'Environments' are made by the makeEnv() function. This function used
to be called before the build began but now happens during the build.
It is easy to see that this step is quite slow; this is a known issue
and it's important to realize that it was already slow, but there was
no obvious cause to attribute it to since nothing was displayed to the
terminal. Since new steps that used to be performed serially are now in a
potentially-parallel build phase, the pathname handling in the SCons scripts
has been tightened up to deal with chdir() race conditions. In general,
pathnames are computed earlier and more likely to be stored, passed around,
and processed as absolute paths rather than relative paths.  In the end,
some of these issues had to be fixed by inserting serializing dependencies
in the build.

Minor note:
For the null ISA, we just provide a dummy inc.d so SCons is never
compelled to try to generate it. While it seems slightly wrong to have
anything in src/arch/*/generated (i.e. a non-generated 'generated' file),
it's by far the simplest solution.
2014-05-09 18:58:47 -04:00
Sascha Bischoff
e940bac278 mem: Auto-generate CommMonitor trace file names
Splits the CommMonitor trace_file parameter into three parameters. Previously,
the trace was only enabled if the trace_file parameter was set, and would be
written to this file. This patch adds in a trace_enable and trace_compress
parameter to the CommMonitor.

No trace is generated if trace_enable is set to False. If it is set to True, the
trace is written to a file based on the name of the SimObject in the simulation
hierarchy. For example, system.cluster.il1_commmonitor.trc. This filename can be
overridden by additionally specifying a file name to the trace_file parameter
(more on this later).

The trace_compress parameter will append .gz to any filename if set to True.
This enables compression of the generated traces. If the file name already ends
in .gz, then no changes are made.

The trace_file parameter will override the name set by the trace_enable
parameter. In the case that the specified name does not end in .gz but
trace_compress is set to true, .gz is appended to the supplied file name.
2014-05-09 18:58:46 -04:00
Andreas Hansson
0c75581d03 stats: updates for pc-switcheroo-full due to o3 smt fix 2014-04-22 03:12:15 -04:00
Nilay Vaish
3bc5cfcc03 stats: updates due to o3 smt fix
+ changes to one ruby regression config.ini file.
2014-04-19 09:16:14 -05:00
Andreas Hansson
8b4b1dcb86 stats: Update stats for DRAM changes
This patch updates the stats to reflect the changes to the DRAM
controller.
2014-03-23 11:12:19 -04:00
Nilay Vaish
83d09ee215 stats: updates due to changes to ruby config scripts
These updates to ruby regression stats are due to renaming piobus to iobus
and dropping piobus in the se mode.
2014-03-20 09:16:35 -05:00
Nilay Vaish
b5cc4c7604 config: ruby: rename _cpu_ruby_ports to _cpu_ports 2014-03-20 09:14:14 -05:00
Nilay Vaish
d5b5d89b34 config: remove ruby_fs.py
The patch removes the ruby_fs.py file.  The functionality is being moved to
fs.py.  This would being ruby fs simulations in line with how ruby se
simulations are started (using --ruby option).  The alpha fs config functions
are being combined for classing and ruby memory systems.  This required
renaming the piobus in ruby to iobus.  So, we will have stats being renamed
in the stats file for ruby fs regression.
2014-03-20 08:03:09 -05:00
Nilay Vaish
9b3418d163 ruby: no piobus in se mode
Piobus was recently added to se scripts for ruby so that the interrupt
controller can be connected to something (required since the interrupt
controller sends address range messages).  This patch removes the piobus
and instead, the pio port of ruby port will now ignore the range change
messages in se mode.
2014-03-20 08:03:09 -05:00
Nilay Vaish
53f697a616 stats: updates due to c0db268f811b 2014-02-24 20:50:06 -06:00
Nilay Vaish
8504b079b8 ruby: correct errors in changeset 4eec7bdde5b0
Couple of errors were discovered in 4eec7bdde5b0 which necessitated this patch.
Firstly, we create interrupt controllers in the se mode, but no piobus was
being created.  RubyPort, which earlier used to ignore range changes now
forwards those to the piobus.  The lack of piobus resulted in segmentation
fault.  This patch creates a piobus even in se mode.  It is not created only
when some tester is running.  Secondly,  I had missed out on modifying port
connections for other coherence protocols.
2014-02-24 20:50:05 -06:00
Nilay Vaish
3b404fb1a0 stats: updates due to changes to ruby pio access handling 2014-02-23 19:16:16 -06:00
Nilay Vaish
7e27860ef4 ruby: route all packets through ruby port
Currently, the interrupt controller in x86 is connected to the io bus
directly.  Therefore the packets between the io devices and the interrupt
controller do not go through ruby.  This patch changes ruby port so that
these packets arrive at the ruby port first, which then routes them to their
destination.  Note that the patch does not make these packets go through the
ruby network.  That would happen in a subsequent patch.
2014-02-23 19:16:16 -06:00
Andreas Hansson
fd9343eb85 arm: Bump stats after FS config script update
This patch updates the stats to reflect the change in kernel options
needed for armv8 (but used for all FS regressions).
2014-02-19 07:59:46 -05:00
Nilay Vaish
5abbb84f02 stats: updates due to branch predictor warming 2014-02-16 11:40:34 -06:00
Nilay Vaish
fa0ff1c902 stats: update sparc fs stats 2014-01-27 13:30:37 -06:00
Steve Reinhardt
85016c2d45 stats: update eio stats for recent changes 2014-01-27 00:38:58 -05:00
Ali Saidi
cfb805cc71 stats: update stats for ARMv8 changes 2014-01-24 15:29:34 -06:00
Ali Saidi
f3585c841e stats: update stats for cache occupancy and clock domain changes 2014-01-24 15:29:33 -06:00
Nilay Vaish
fc6d1f3399 stats: updates due to changes to ruby 2014-01-10 16:19:58 -06:00
Nilay Vaish
bb6d7d402b ruby: rename MESI_CMP_directory to MESI_Two_Level
This is because the next patch introduces a three level hierarchy.

--HG--
rename : build_opts/ALPHA_MESI_CMP_directory => build_opts/ALPHA_MESI_Two_Level
rename : build_opts/X86_MESI_CMP_directory => build_opts/X86_MESI_Two_Level
rename : configs/ruby/MESI_CMP_directory.py => configs/ruby/MESI_Two_Level.py
rename : src/mem/protocol/MESI_CMP_directory-L1cache.sm => src/mem/protocol/MESI_Two_Level-L1cache.sm
rename : src/mem/protocol/MESI_CMP_directory-L2cache.sm => src/mem/protocol/MESI_Two_Level-L2cache.sm
rename : src/mem/protocol/MESI_CMP_directory-dir.sm => src/mem/protocol/MESI_Two_Level-dir.sm
rename : src/mem/protocol/MESI_CMP_directory-dma.sm => src/mem/protocol/MESI_Two_Level-dma.sm
rename : src/mem/protocol/MESI_CMP_directory-msg.sm => src/mem/protocol/MESI_Two_Level-msg.sm
rename : src/mem/protocol/MESI_CMP_directory.slicc => src/mem/protocol/MESI_Two_Level.slicc
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/config.ini => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/config.ini
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/ruby.stats
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/simerr => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/simerr
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/simout => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/simout
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/stats.txt
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/system.pc.com_1.terminal => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/system.pc.com_1.terminal
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/config.ini => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/config.ini
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/ruby.stats
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/simerr => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/simerr
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/simout => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/simout
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/stats.txt
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/config.ini => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/config.ini
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/ruby.stats
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/simerr => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/simerr
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/simout => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/simout
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/stats.txt
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/config.ini => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/config.ini
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/ruby.stats
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/simerr => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/simerr
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/simout => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/simout
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/stats.txt
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/config.ini => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/config.ini
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/ruby.stats
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/simerr => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/simerr
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/simout => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/simout
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/stats.txt
2014-01-04 00:03:33 -06:00
Steve Reinhardt
a212844f67 config, x86: move kernel specification from tests to FSConfig.py
For some reason, the default x86 kernel is specified in
tests/configs/x86_generic.py and not in configs/common/FSConfig.py,
where the kernels for all the other ISAs are.  This means that
running configs/example/fs.py for x86 fails because no kernel
is specified.  Moving the specification over fixes this problem.

There is another problem that this uncovers, which is that going
past the init stage (i.e., past where the regression test stops)
fails because the fsck test on the disk device fails, but that's
a separate issue.
2014-01-03 17:08:44 -08:00
Nilay Vaish
e6008b6bc1 stats: updates due to bug fixed in mesi coherence protocol 2013-12-26 15:18:58 -06:00
Nilay Vaish
2823982a3c stats: updates due to changes to ticksToCycles() 2013-11-26 17:05:25 -06:00
Steve Reinhardt
a2c21d47a8 tests: suppress output on switcheroo tests
The output from the switcheroo tests is voluminous and
(because it includes timestamps) highly sensitive to
minor changes, leading to extremely large updates to the
reference outputs.  This patch addresses this problem
by suppressing output from the tests.  An internal
parameter can be set to enable the output.  Wiring that
up to a command-line flag (perhaps even the rudimantary
-v/-q options in m5/main.py) is left for future work.
2013-11-14 15:03:42 -08:00
Andreas Hansson
ccfdc533b9 stats: Bump stats to match DRAM controller changes
This patch encompasses all the stats updates needed to reflect the
changes to the DRAM controller.
2013-11-01 11:56:34 -04:00
Andreas Hansson
0e6ced5c4f stats: Bump stats after shifting to SimpleMemory
Match stats with new regression configs.
2013-11-01 11:56:15 -04:00
Andreas Hansson
9145e2cfd4 test: Use SimpleMemory for atomic full-system tests
Keep it simple and use the SimpleMemory rather than the DRAM
controller model for atomic full-system tests.
2013-11-01 11:56:14 -04:00
Steve Reinhardt
10e6450120 test: update stats
Update stats for recent changes.  Mostly minor changes
in register access stats due to addition of new cc
register type and slightly different (and more accurate)
classification of int vs. fp register accesses.
2013-10-16 10:44:12 -04:00
Steve Reinhardt
fe61a074a2 scons: fix minor update-ref bug in regressions
In the unusual case that regressions are run with --update-ref
when there is no existing regression output, scons gets
confused because it depends on stats.txt to trigger the
update, but it has no indication that running the test will
generate the stats.txt file.  (In the typical case where
stats.txt already exists, scons doesn't care about where
it came from.)

It's easy to fix this just by adding the stats.txt file
to the target list for the test action.
2013-10-15 18:22:41 -04:00
Andreas Hansson
a44bb59192 stats: Bump pc-simple-timing-ruby stats
This patch simply brings the stats for the pc-simple-timing-ruby
regression up to date. The particular regression seems to give
different results on different systems unfortunately, and this update
reflects the current behaviour on zizzer.
2013-10-09 04:41:19 -04:00
Andreas Sandberg
0438bf9389 stats: Update x86 stats after x87 fixes
The updates to the x87 caused the stats for several regressions to
change. This was mainly caused by the addition of a working 32-bit and
80-bit FP load instruction and xsave support.
2013-10-02 11:03:38 +02:00
Steve Reinhardt
fbc1feb39a tests: update reference outputs
Apparently only stats.txt was updated the last time, so
this changeset updates other reference output files
(config.ini, simout, simerr, ruby.stats) so that
test output diffs should not be cluttered with irrelevant
changes.  There are a few stats.txt updates too, but
they are in the minority.
2013-09-28 15:25:17 -04:00
Nilay Vaish
143dfa31df stats: update sparc fs due to recent changes to memory class. 2013-09-15 13:45:59 -05:00
Nilay Vaish
ff87a0dd9c stats: ruby: updates due to recent changes. 2013-09-06 16:21:36 -05:00
Andreas Hansson
0495b7e9e7 tests: Move ISA-independent tests to the NULL ISA
This patch simply takes a first step to use the NULL ISA build for
tests that do not make use of a CPU. Most of the Ruby tests could go
the same way, but to avoid duplicating a lot of compilation targets
that will have to wait until Ruby is built as a library and linked in
independently.

--HG--
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest/config.ini => tests/quick/se/50.memtest/ref/null/none/memtest/config.ini
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest/simerr => tests/quick/se/50.memtest/ref/null/none/memtest/simerr
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest/simout => tests/quick/se/50.memtest/ref/null/none/memtest/simout
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest/stats.txt => tests/quick/se/50.memtest/ref/null/none/memtest/stats.txt
rename : tests/quick/se/70.tgen/ref/arm/linux/tgen-simple-dram/simerr => tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/simerr
rename : tests/quick/se/70.tgen/ref/arm/linux/tgen-simple-dram/simout => tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/simout
rename : tests/quick/se/70.tgen/ref/arm/linux/tgen-simple-dram/stats.txt => tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/stats.txt
rename : tests/quick/se/70.tgen/ref/arm/linux/tgen-simple-mem/simerr => tests/quick/se/70.tgen/ref/null/none/tgen-simple-mem/simerr
rename : tests/quick/se/70.tgen/ref/arm/linux/tgen-simple-mem/simout => tests/quick/se/70.tgen/ref/null/none/tgen-simple-mem/simout
rename : tests/quick/se/70.tgen/ref/arm/linux/tgen-simple-mem/stats.txt => tests/quick/se/70.tgen/ref/null/none/tgen-simple-mem/stats.txt
2013-09-04 13:22:57 -04:00
Steve Reinhardt
dc18352e3c stats: update eio stats 2013-08-24 12:03:10 -04:00
Nilay Vaish
e351e846e3 stats: update ruby.stats, config.ini files for x86 fs test 2013-08-20 11:32:33 -05:00
Nilay Vaish
c4e7e18eeb ruby: add option for number of transitions per cycle
The number of transitions per cycle that a controller can carry out is
a proxy for the number of ports that a controller has. This value is
currently 32 which is way too high. The patch introduces an option
for the number of ports and uses this option in the protocol files
to set the number of transitions. The default value is being set to
4. None of the se regressions change. Ruby stats for the fs regression
change and are being updated.
2013-08-20 11:32:31 -05:00
Andreas Hansson
b63631536d stats: Cumulative stats update
This patch updates the stats to reflect the: 1) addition of the
internal queue in SimpleMemory, 2) moving of the memory class outside
FSConfig, 3) fixing up of the 2D vector printing format, 4) specifying
burst size and interface width for the DRAM instead of relying on
cache-line size, 5) performing merging in the DRAM controller write
buffer, and 6) fixing how idle cycles are counted in the atomic and
timing CPU models.

The main reason for bundling them up is to minimise the changeset
size.
2013-08-19 03:52:36 -04:00
Andreas Hansson
49d88f08b0 mem: Change AbstractMemory defaults to match the common case
This patch changes the default parameter value of conf_table_reported
to match the common case. It also simplifies the regression and config
scripts to reflect this change.
2013-08-19 03:52:33 -04:00