Get rid of misc.py and just stick misc things in __init__.py
Move utility functions out of SCons files and into m5.util
Move utility type stuff from m5/__init__.py to m5/util/__init__.py
Remove buildEnv from m5 and allow access only from m5.defines
Rename AddToPath to addToPath while we're moving it to m5.util
Rename read_command to readCommand while we're moving it
Rename compare_versions to compareVersions while we're moving it.
--HG--
rename : src/python/m5/convert.py => src/python/m5/util/convert.py
rename : src/python/m5/smartdict.py => src/python/m5/util/smartdict.py
Lowest priority interrupts are now delivered based on a rotating offset into
the list of potential recipients. There could be parasitic cases were a
processor gets picked on and ends up at that rotating offset all the time, but
it's much more likely that the group will stay consistent and the pain will be
distributed evenly.
This is a hack so that the IO APIC can figure out information about the local
APICs. The local APICs still have no way to find out about each other.
Ideally, when the local APICs update state that's relevant to somebody else,
they'd send an update to everyone. Without being able to do a broadcast, that
would still require knowing who else there is to notify. Other broadcasts are
implemented using assumptions that may not always be true.
The ID as exposed to software can be changed. Tracking those changes in M5
would be cumbersome, especially since there's no guarantee the IDs will remain
unique.
Previously there was one per bus, which caused some coherence problems
when more than one decided to respond. Now there is just one on
the main memory bus. The default bus responder on all other buses
is now the downstream cache's cpu_side port. Caches no longer need
to do address range filtering; instead, we just have a simple flag
to prevent snoops from propagating to the I/O bus.
We previously used the actual wall time for the base timestamps,
making etherdumps non-deterministic. This fixes that problem and
gets rid of the "malformed packet" at the front that we needed to
provide the right base timestamp to wireshark/tcpdump.
the primary identifier for a hardware context should be contextId(). The
concept of threads within a CPU remains, in the form of threadId() because
sometimes you need to know which context within a cpu to manipulate.
The IntDev class is a base for anything that supports IntPins. IntPins allow
devices to generically trigger interrupts on a particular pin of an IntDev
device without having to know what the device is or what pin they're attached
to.
Make them easier to express by only having the cxx_type parameter which
has the full namespace name, and drop the cxx_namespace thing.
Add support for multiple levels of namespace.
Even though we're not incorrect about operator precedence, let's add
some parens in some particularly confusing places to placate GCC 4.3
so that we don't have to turn the warning off. Agreed that this is a
bit of a pain for those users who get the order of operations correct,
but it is likely to prevent bugs in certain cases.
These functions keep trying to read and write until all data has been
transferred, or an error occurrs. In the case where an end of file
hasn't been reached, but all of the bytes have not been read/written,
try again. On EINTR, try again.
When invoking several copies of m5 on the same machine at the same
time, there can be a race for TCP ports for the terminal connections
or remote gdb. Expose a function to disable those ports, and have the
regression scripts disable them. There are some SimObjects that have
no other function than to be used with ports (NativeTrace and
EtherTap), so they will panic if the ports are disabled.
Make OutputDirectory::resolve() private and change the functions using
resolve() to instead use create().
--HG--
extra : convert_revision : 36d4be629764d0c4c708cec8aa712cd15f966453
SimObjects not yet updated:
- Process and subclasses
- BaseCPU and subclasses
The SimObject(const std::string &name) constructor was removed. Subclasses
that still rely on that behavior must call the parent initializer as
: SimObject(makeParams(name))
--HG--
extra : convert_revision : d6faddde76e7c3361ebdbd0a7b372a40941c12ed
creation and initialization now happens in python. Parameter objects
are generated and initialized by python. The .ini file is now solely for
debugging purposes and is not used in construction of the objects in any
way.
--HG--
extra : convert_revision : 7e722873e417cb3d696f2e34c35ff488b7bff4ed
Note that we should *not* print pointer values in DPRINTFs as
these needlessly clutter tracediff output.
--HG--
extra : convert_revision : 25a448f1b3ac8d453a717a104ad6dc0112fb30bb
supposed to and make sure parameters have the right type.
Also make sure that any object that should be an intermediate
type has the right options set.
--HG--
extra : convert_revision : d56910628d9a067699827adbc0a26ab629d11e93
src/dev/io_device.cc:
extra printing and assertions
src/mem/bridge.hh:
deal with packets only satisfying part of a request by making many requests
src/mem/cache/cache_impl.hh:
make the cache try to satisfy a functional request from the cache above it before checking itself
--HG--
extra : convert_revision : 1df52ab61d7967e14cc377c560495430a6af266a
add seperate response buffers and request queue sizes in bus bridge
add delay to respond to a nack in the bus bridge
src/dev/i8254xGBe.cc:
src/dev/ide_ctrl.cc:
src/dev/ns_gige.cc:
src/dev/pcidev.hh:
src/dev/sinic.cc:
add backoff delay parameters
src/dev/io_device.cc:
src/dev/io_device.hh:
add a backoff algorithm when nacks are received.
src/mem/bridge.cc:
src/mem/bridge.hh:
add seperate response buffers and request queue sizes
add a new parameters to specify how long before a nack in ready to go after a packet that needs to be nacked is received
src/mem/cache/cache_impl.hh:
assert on the
src/mem/tport.cc:
add a friendly assert to make sure the packet was inserted into the list
--HG--
extra : convert_revision : 3595ad932015a4ce2bb72772da7850ad91bd09b1
src/dev/i8254xGBe.cc:
src/dev/i8254xGBe.hh:
src/dev/i8254xGBe_defs.hh:
finish coding the Intel Gb NIC device
src/dev/io_device.hh:
we really don't want to be able to pass a null buffer to dma read, at least not the way we have things setup now... it won't work at all
--HG--
extra : convert_revision : 6739497232317ec407cfa7a96de4575a9a6cfc46
the device is there, and in good working order.
src/dev/SConscript:
add intel gbe to the dev SCons file
src/dev/i8254xGBe.cc:
src/dev/i8254xGBe.hh:
src/dev/i8254xGBe_defs.hh:
use new manner of registers and implement all device registers that are touched through boot and ifup
--HG--
extra : convert_revision : b1a1767f0fd31cd371e432cb48ac9a2e9f9291b5
src/arch/sparc/ua2005.cc:
fix interrupting when quisced. Since sticks correspond to instructions when not quisced we need to
check if were suspended and interrupt at the guess time
src/base/traceflags.py:
add trace flag for Iob
src/cpu/simple/base.cc:
Use Quisce instead of IPI trace flag
src/dev/sparc/iob.cc:
add some Dprintfs
--HG--
extra : convert_revision : 72e18fcc750ad1e4b2bb67b19b354eaffc6af6d5
automatic. The point is that now a subdirectory can be added
to the build process just by creating a SConscript file in it.
The process has two passes. On the first pass, all subdirs
of the root of the tree are searched for SConsopts files.
These files contain any command line options that ought to be
added for a particular subdirectory. On the second pass,
all subdirs of the src directory are searched for SConscript
files. These files describe how to build any given subdirectory.
I have added a Source() function. Any file (relative to the
directory in which the SConscript resides) passed to that
function is added to the build. Clean up everything to take
advantage of Source().
function is added to the list of files to be built.
--HG--
extra : convert_revision : 103f6b490d2eb224436688c89cdc015211c4fd30
src/arch/alpha/utility.hh:
src/arch/mips/utility.hh:
src/arch/sparc/utility.hh:
src/arch/x86/utility.hh:
add hook for system to startup the cpu or not... in the case of FS sparc, only the first cpu would get spunup.. the rest sit in an idle state until they get an ipi
src/arch/sparc/isa/decoder.isa:
handle writable bits of strandstatus register in miscregfile
src/arch/sparc/miscregfile.hh:
some constants for the strand status register
src/arch/sparc/ua2005.cc:
properly implement the strand status register
src/dev/sparc/iob.cc:
implement ipi generation properly
src/sim/system.cc:
call into the ISA to start the CPU (or not)
--HG--
extra : convert_revision : 0003b2032337d8a031a9fc044da726dbb2a9e36f
directly configured by python. Move stuff from root.(cc|hh) to
core.(cc|hh) since it really belogs there now.
In the process, simplify how ticks are used in the python code.
--HG--
extra : convert_revision : cf82ee1ea20f9343924f30bacc2a38d4edee8df3
src/dev/sparc/iob.cc:
don't warn on cpu restart/idle/halt stuff
tests/SConscript:
add sparc target in test Sconscript
util/regress:
Add SPARC_FS target in regress
--HG--
extra : convert_revision : 37fa21700ec4c350d87ca9723bc3359feb81c50a
configs/common/FSConfig.py:
add an attachOnChipIO to force people to think about where "onchip" i/o should be connected in their hierarchy
--HG--
extra : convert_revision : cf79a9a00760b7daf28063f407a04bd38b956843
configs/common/FSConfig.py:
Use binaries we've compiled instead of the ones that come with Legion
src/arch/alpha/interrupts.hh:
get rid of post(int int_type) and add a get_vec function that gets the interrupt vector for an interrupt number
src/arch/sparc/asi.cc:
Add AsiIsInterrupt() to AsiIsMmu()
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
Add InterruptVector type
src/arch/sparc/interrupts.hh:
rework interrupts. They are no longer cleared when created... A I/O or ASI read/write needs to happen before they are cleared
src/arch/sparc/isa_traits.hh:
Add the "interrupt" trap types to isa traits
src/arch/sparc/miscregfile.cc:
add names for all the misc registers and possible post an interrupt when TL is changed.
src/arch/sparc/miscregfile.hh:
Add a helper function to post an interrupt when pil < some set softint
src/arch/sparc/regfile.cc:
src/arch/sparc/regfile.hh:
InterruptLevel shouldn't really live here, moved to interrupt.hh
src/arch/sparc/tlb.cc:
Add interrupt ASIs to TLB
src/arch/sparc/ua2005.cc:
Add checkSoftInt to check if a softint needs to be posted
Check that a tickCompare isn't scheduled before scheduling one
Post and clear interrupts on queue writes and what not
src/base/bitfield.hh:
Add an helper function to return the msb that is set
src/cpu/base.cc:
src/cpu/base.hh:
get rid of post_interrupt(type) since it's no longer needed.. Add a way to see what interrupts are pending
src/cpu/intr_control.cc:
src/cpu/intr_control.hh:
src/dev/alpha/tsunami_cchip.cc:
src/python/m5/objects/IntrControl.py:
Make IntrControl have a system pointer rather than using a cpu pointer to get one
src/dev/sparc/SConscript:
add iob to SConsscrip
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.out:
tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.ini:
tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.out:
update config.ini/out for intrcntrl not having a cpu pointer anymore
--HG--
extra : convert_revision : 38614f6b9ffc8f3c93949a94ff04b7d2987168dd
relevant code directly into the SimConsole object. Now,
you can easily turn off the listen port by just specifying
0 as the port.
--HG--
extra : convert_revision : c8937fa45b429d8a0728e6c720a599e38972aaf0
src/dev/alpha/tsunamireg.h:
get rid of things that aren't really tsunami registers
src/dev/platform.hh:
src/dev/uart.cc:
the uart pointer isn't used anymore
src/dev/simconsole.cc:
make the simconsole print something more useful to distinguish between various consoles in a single system
src/dev/uart8250.hh:
put the needed uart defines in here rather than including them from tsunamireg
src/python/m5/objects/T1000.py:
add a console to the T1000 config for the hypervisor
--HG--
extra : convert_revision : 76ca92122e611eaf76b989bc699582eef8297be8
Created MemCmd class to wrap enum and provide handy methods to
check attributes, convert to string/int, etc.
--HG--
extra : convert_revision : 57f147ad893443e3a2040c6d5b4cdb1a8033930b
fix unaligned accesses in mmaped disk device
src/arch/sparc/isa/decoder.isa:
get (ld|st)fsr ops working right. In reality the fp enable check needs to go higher up in the emitted code
src/arch/sparc/isa/formats/basic.isa:
move the cexec into the aexec field
src/cpu/exetrace.cc:
copy the exception state from legion when we get it wrong. We aren't going to get it right without an fp emulation layer
src/dev/sparc/mm_disk.cc:
src/dev/sparc/mm_disk.hh:
fix unaligned accesses in the memory mapped disk device
--HG--
extra : convert_revision : aaa33096b08cf0563fe291d984a87493a117e528
src/arch/sparc/floatregfile.cc:
Fix serialization for fpreg
src/arch/sparc/intregfile.cc:
fix serialization for intreg
src/arch/sparc/miscregfile.cc:
fix serialization from miscreg
src/arch/sparc/pagetable.cc:
fix serialization for page table
src/arch/sparc/regfile.cc:
need to serialize nnpc
src/arch/sparc/tlb.cc:
write serialization code for tlb
src/cpu/base.cc:
provide a way to find the thread number a context is
serialize the instruction counter
src/cpu/base.hh:
provide a way to find the thread number a context is
and given a thread number find a context pointer
src/cpu/cpuevent.hh:
provide method to get thread context from a cpu event for serialization
src/dev/sparc/t1000.cc:
src/dev/sparc/t1000.hh:
nothing to serialize in t1000
src/sim/serialize.cc:
src/sim/serialize.hh:
Make findObj() work (it hasn't since we did the python conversion stuff)
--HG--
extra : convert_revision : a95bc4e3c3354304171efbe3797556fdb146bea2
pretty close to compiling w/ suns compiler
briefly:
add dummy return after panic()/fatal()
split out flags by compiler vendor
include cstring and cmath where appropriate
use std namespace for string ops
SConstruct:
Add code to detect compiler and choose cflags based on detected compiler
Fix zlib check to work with suncc
src/SConscript:
split out flags by compiler vendor
src/arch/sparc/isa/decoder.isa:
use correct namespace for sqrt
src/arch/sparc/isa/formats/basic.isa:
add dummy return around panic
src/arch/sparc/isa/formats/integerop.isa:
use correct namespace for stringops
src/arch/sparc/isa/includes.isa:
include cstring and cmath where appropriate
src/arch/sparc/isa_traits.hh:
remove dangling comma
src/arch/sparc/system.cc:
dummy return to make sun cc front end happy
src/arch/sparc/tlb.cc:
src/base/compression/lzss_compression.cc:
use std namespace for string ops
src/arch/sparc/utility.hh:
no reason to say something is unsigned unsigned int
src/base/compression/null_compression.hh:
dummy returns to for suncc front end
src/base/cprintf.hh:
use standard variadic argument syntax instead of gnuc specefic renaming
src/base/hashmap.hh:
don't need to define hash for suncc
src/base/hostinfo.cc:
need stdio.h for sprintf
src/base/loader/object_file.cc:
munmap is in std namespace not null
src/base/misc.hh:
use M5 generic noreturn macros
use standard variadic macro __VA_ARGS__
src/base/pollevent.cc:
we need file.h for file flags
src/base/random.cc:
mess with include files to make suncc happy
src/base/remote_gdb.cc:
malloc memory for function instead of having a non-constant in an array size
src/base/statistics.hh:
use std namespace for floor
src/base/stats/text.cc:
include math.h for rint (cmath won't work)
src/base/time.cc:
use suncc version of ctime_r
src/base/time.hh:
change macro to work with both gcc and suncc
src/base/timebuf.hh:
include cstring from memset and use std::
src/base/trace.hh:
change variadic macros to be normal format
src/cpu/SConscript:
add dummy returns where appropriate
src/cpu/activity.cc:
include cstring for memset
src/cpu/exetrace.hh:
include cstring fro memcpy
src/cpu/simple/base.hh:
add dummy return for panic
src/dev/baddev.cc:
src/dev/pciconfigall.cc:
src/dev/platform.cc:
src/dev/sparc/t1000.cc:
add dummy return where appropriate
src/dev/ide_atareg.h:
make define work for both gnuc and suncc
src/dev/io_device.hh:
add dummy returns where approirate
src/dev/pcidev.hh:
src/mem/cache/cache_impl.hh:
src/mem/cache/miss/blocking_buffer.cc:
src/mem/cache/tags/lru.hh:
src/mem/cache/tags/split.hh:
src/mem/cache/tags/split_lifo.hh:
src/mem/cache/tags/split_lru.hh:
src/mem/dram.cc:
src/mem/packet.cc:
src/mem/port.cc:
include cstring for string ops
src/dev/sparc/mm_disk.cc:
add dummy return where appropriate
include cstring for string ops
src/mem/cache/miss/blocking_buffer.hh:
src/mem/port.hh:
Add dummy return where appropriate
src/mem/cache/tags/iic.cc:
cast hastSets to double for log() call
src/mem/physical.cc:
cast pmemAddr to char* for munmap
src/sim/byteswap.hh:
make define work for suncc and gnuc
--HG--
extra : convert_revision : ef8a1f1064e43b6c39838a85c01aee4f795497bd
pass the tuple of python's struct_time and interpret that.
Fixes a problem where the local timezone leaked into the time
calculation. Also fix things so that the unix, python, and RTC
data sheets all get the right time. Provide both years since 1900
and BCD two digit year.
Put the date back at 1/1/2006 for now.
--HG--
extra : convert_revision : 473244572f468de2cb579a3dd7ae296a6f81f5d7
configs/common/FSConfig.py:
src/python/m5/objects/T1000.py:
add configuration for memory mapped disk
src/dev/sparc/SConscript:
add memory mapped disk to sconscript
--HG--
extra : convert_revision : d8df4a455cf48000042d0ff93a274985f4dbe905
formats for time (strings, datetime objects, etc.)
Advance system time to 1/1/2009
Clean up time management code a little bit
--HG--
extra : convert_revision : 28ebecc7ea6b12f4345c77a9a6b4bdf2e752c4f8
RangeSize as a function takes a start address, and a SIZE, and will make the range (start, start+size-1) for you.
src/cpu/memtest/memtest.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/lsq.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/simple/atomic.hh:
src/cpu/simple/timing.hh:
Fix RangeSize arguments
src/dev/alpha/tsunami_cchip.cc:
src/dev/alpha/tsunami_io.cc:
src/dev/alpha/tsunami_pchip.cc:
src/dev/baddev.cc:
pioSize indicates SIZE, not a mask
--HG--
extra : convert_revision : d385521fcfe58f8dffc8622260937e668a47a948
Deal with block initializing stores (by doing nothing, at some point we might want to do the write hint 64 like thing)
Fix tcc instruction igoner in legion-lock stuff to be correct in all cases
Have console interrupts warn rather than panicing until we figure out what to do with interrupts
src/arch/sparc/miscregfile.cc:
src/arch/sparc/miscregfile.hh:
add a magic miscreg which reads all the bits the tlb needs in one go
src/arch/sparc/tlb.cc:
initialized the context type and id to reasonable values and handle block init stores
src/arch/sparc/tlb_map.hh:
fix bug in tlb map code
src/base/range_map.hh:
fix bug in rangemap code and add range_multimap
(these are probably useful for bus range stuff)
src/cpu/exetrace.cc:
fixup tcc ignore code to be correct
src/dev/sparc/t1000.cc:
make console interrupt stuff warn instead of panicing until we get interrupt stuff figured out
src/unittest/rangemaptest.cc:
fix up the rangemap unit test to catch the missing case
--HG--
extra : convert_revision : 70604a8b5d0553aa0b0bd7649f775a0cfa8267a5
configs/common/FSConfig.py:
seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
Use instruction count from cpu rather than cycles because that is what legion does
we can change it back after were done with legion
src/base/bitfield.hh:
add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
change asserts of packet success to if panics wrapped with NDEBUG defines
so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
convert some tabs to spaces
src/python/m5/objects/T1000.py:
add more fake devices for each l1 bank and each memory controller
--HG--
extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
Add the ability to use an address mask for symbol loading
Rather then silently failing on platform accesses panic
Move BadAddr/IsaFake no Device from Tsunami
Let the system kernel be none, but warn about it
configs/common/FSConfig.py:
We don't have a kernel for sparc yet
src/arch/sparc/system.cc:
Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
src/base/loader/aout_object.cc:
src/base/loader/aout_object.hh:
src/base/loader/ecoff_object.cc:
src/base/loader/ecoff_object.hh:
src/base/loader/elf_object.cc:
src/base/loader/elf_object.hh:
src/base/loader/object_file.hh:
src/base/loader/raw_object.cc:
src/base/loader/raw_object.hh:
Add the ability to use an address mask for symbol loading
src/dev/sparc/t1000.cc:
Rather then silently failing on platform accesses panic
src/dev/sparc/t1000.hh:
fix up a couple of platform comments
src/python/m5/objects/Bus.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/T1000.py:
src/python/m5/objects/Tsunami.py:
Move BadAddr/IsaFake no Device from Tsunami
src/python/m5/objects/System.py:
Let kernel be none
src/sim/system.cc:
Let the system kernel be none, but warn about it
--HG--
extra : convert_revision : 92f6afef599a3d3c7c5026d03434102c41c7b5f4
