Commit graph

329 commits

Author SHA1 Message Date
Andreas Hansson
9cbe1cb653 config: Unify caches used in regressions and adjust L2 MSHRs
This patch unified the L1 and L2 caches used throughout the
regressions instead of declaring different, but very similar,
configurations in the different scripts.

The patch also changes the default L2 configuration to match what it
used to be for the fs and se scripts (until the last patch that
updated the regressions to also make use of the cache config). The
MSHRs and targets per MSHR are now set to a more realistic default of
20 and 12, respectively.

As a result of both the aforementioned changes, many of the regression
stats are changed. A follow-on patch will bump the stats.
2012-10-30 07:44:08 -04:00
Andreas Hansson
651de2d9af config: Fix the cache class naming in regression scripts
This patch unifies the naming of the default L1 and L2 caches in the
regression configs to be in line with what is used in the se and fs
scripts.
2012-10-26 06:42:42 -04:00
Andreas Hansson
66e331c7bb config: Use SimpleDRAM in full-system, and with o3 and inorder
This patch favours using SimpleDRAM with the default timing instead of
SimpleMemory for all regressions that involve the o3 or inorder CPU,
or are full system (in other words, where the actual performance of
the memory is important for the overall performance).

Moving forward, the solution for FSConfig and the users of fs.py and
se.py is probably something similar to what we use to choose the CPU
type. I envision a few pre-set configurations SimpleLPDDR2,
SimpleDDR3, etc that can be choosen by a dram_type option. Feedback on
this part is welcome.

This patch changes plenty stats and adds all the DRAM controller
related stats. A follow-on patch updates the relevant statistics. The
total run-time for the entire regression goes up with ~5% with this
patch due to the added complexity of the SimpleDRAM model. This is a
concious trade-off to ensure that the model is properly tested.
2012-10-25 13:14:38 -04:00
Andreas Hansson
d22796c03c config: Use shared cache config for regressions
This patch uses the common L1, L2 and IOCache configuration for the
regressions that all share the same cache parameters. There are a few
regressions that use a slightly different configuration (memtest,
o3-timing=mp, simple-atomic-mp and simple-timing-mp), and the latter
are not changed in this patch. They will be updated in a future patch.

The common cache configurations are changed to match the ones used in
the regressions, and are slightly changed with respect to what they
were. Hopefully this means we can converge on a common base
configuration, used both in the normal user configurations and
regressions.

As only regressions that shared the same cache configuration are
updated, no regressions are affected.
2012-10-25 04:32:44 -04:00
Andreas Hansson
88554790c3 Mem: Use cycles to express cache-related latencies
This patch changes the cache-related latencies from an absolute time
expressed in Ticks, to a number of cycles that can be scaled with the
clock period of the caches. Ultimately this patch serves to enable
future work that involves dynamic frequency scaling. As an immediate
benefit it also makes it more convenient to specify cache performance
without implicitly assuming a specific CPU core operating frequency.

The stat blocked_cycles that actually counter in ticks is now updated
to count in cycles.

As the timing is now rounded to the clock edges of the cache, there
are some regressions that change. Plenty of them have very minor
changes, whereas some regressions with a short run-time are perturbed
quite significantly. A follow-on patch updates all the statistics for
the regressions.
2012-10-15 08:10:54 -04:00
Andreas Hansson
1c321b8847 Regression: Use CPU clock and 32-byte width for L1-L2 bus
This patch changes the CoherentBus between the L1s and L2 to use the
CPU clock and also four times the width compared to the default
bus. The parameters are not intending to fit every single scenario,
but rather serve as a better startingpoint than what we previously
had.

Note that the scripts that do not use the addTwoLevelCacheHiearchy are
not affected by this change.

A separate patch will update the stats.
2012-10-15 08:08:08 -04:00
Mrinmoy Ghosh
6fc0094337 Cache: add a response latency to the caches
In the current caches the hit latency is paid twice on a miss. This patch lets
a configurable response latency be set of the cache for the backward path.
2012-09-25 11:49:41 -05:00
Andreas Hansson
fccbf8bb45 AddrRange: Simplify AddrRange params Python hierarchy
This patch simplifies the Range object hierarchy in preparation for an
address range class that also allows striping (e.g. selecting a few
bits as matching in addition to the range).

To extend the AddrRange class to an AddrRegion, the first step is to
simplify the hierarchy such that we can make it as lean as possible
before adding the new functionality. The only class using Range and
MetaRange is AddrRange, and the three classes are now collapsed into
one.
2012-09-19 06:15:41 -04:00
Joel Hestness
234fa4cf7e Standard Switch: Drain the system before switching CPUs
When switching from an atomic CPU to any of the timing CPUs, a drain is
unnecessary since no events are scheduled in atomic mode. However, when
trying to switch CPUs starting with a timing CPU, there may be events
scheduled. This change ensures that all events are drained from the system
by calling m5.drain before switching CPUs.
2012-09-12 21:41:37 -05:00
Andreas Hansson
9ad7e23e9e Checkpoint: Pass maxtick to avoid undefined variable
This patch fixes a bug in scriptCheckpoints, where maxtick was used
undefined. The bug caused checkpointing by means of --take-checkpoints
to fail.
2012-09-11 14:14:51 -04:00
Nilay Vaish
0b45ae5df3 se.py: support specifying multiple programs via command line
This patch allows for specifying multiple programs via command line. It also
adds an option for specifying whether to use of SMT. But SMT does not work for
the o3 cpu as of now.
2012-09-09 09:33:45 -05:00
Andreas Hansson
a6074016e2 Bridge: Remove NACKs in the bridge and unify with packet queue
This patch removes the NACKing in the bridge, as the split
request/response busses now ensure that protocol deadlocks do not
occur, i.e. the message-dependency chain is broken by always allowing
responses to make progress without being stalled by requests. The
NACKs had limited support in the system with most components ignoring
their use (with a suitable call to panic), and as the NACKs are no
longer needed to avoid protocol deadlocks, the cleanest way is to
simply remove them.

The bridge is the starting point as this is the only place where the
NACKs are created. A follow-up patch will remove the code that deals
with NACKs in the endpoints, e.g. the X86 table walker and DMA
port. Ultimately the type of packet can be complete removed (until
someone sees a need for modelling more complex protocols, which can
now be done in parts of the system since the port and interface is
split).

As a consequence of the NACK removal, the bridge now has to send a
retry to a master if the request or response queue was full on the
first attempt. This change also makes the bridge ports very similar to
QueuedPorts, and a later patch will change the bridge to use these. A
first step in this direction is taken by aligning the name of the
member functions, as done by this patch.

A bit of tidying up has also been done as part of the simplifications.

Surprisingly, this patch has no impact on any of the
regressions. Hence, there was never any NACKs issued. In a follow-up
patch I would suggest changing the size of the bridge buffers set in
FSConfig.py to also test the situation where the bridge fills up.
2012-08-22 11:39:58 -04:00
Andreas Hansson
4ebefc145a Checkpoint: Fix broken checkpointing functionality
This patch fixes the checkpointing by ensuring that the directory is
passer to the scriptCheckpoints function, and that the num_checkpoints
is not used before it is initialised.
2012-08-21 05:48:52 -04:00
Anthony Gutierrez
5a648f2074 configs: add option for repeatedly switching back-and-forth between cpu types.
This patch adds a --repeat-switch option that will enable repeat core
switching at a user defined period (set with --switch-freq option).
currently, a switch can only occur between like CPU types. inorder CPU
switching is not supported.

*note*
this patch simply allows a config that will perform repeat switching, it
does not fix drain/switchout functionality. if you run with repeat switching
you will hit assertion failures and/or your workload with hang or die.
2012-08-15 10:38:07 -04:00
Nilay Vaish
62425b7a07 Simulation.py: move code related to checkpointing to functions
This patch moves the code related to checkpointing from the run() function to
several different functions. The aim is to make the code more manageable. No
functionality changes are expected, but since the code is kind of unruly, it
is possible that some change might have creeped in.
2012-08-06 18:14:32 -05:00
Nilay Vaish
d81a51a4c8 Config: change how cpu class is set
This changes the way in which the cpu class while restoring from a checkpoint
is set. Earlier it was assumed if cpu type with which to restore is not same
as the cpu type with the which to run the simulation, then the checkpoint
should be restored with the atomic cpu. This assumption is being dropped. The
checkpoint can now be restored with any cpu type, the default being atomic cpu.
2012-08-06 18:14:31 -05:00
Andreas Hansson
ae6ab7c03c Config: Use clock option in se/fs script and pass to switch_cpus
This patch changes the se and fs script to use the clock option and
not simply set the CPUs clock to 2 GHz. It also makes a minor change
to the assignment of the switch_cpus clock to allow different clocks.
2012-07-23 09:32:22 -04:00
Anthony Gutierrez
ce9ac38342 configs: add run scripts for ics/gb versions of android and bbench
1) Modifies Benchmarks.py to add support for Android ICS and BBench on Android ICS.

2) An rcS script is added for BBench on ICS.

3) Separates benchmark entries and rcS scripts for GB/ICS

4) Removes the debugging output from the existing BBench run script. These
   print statements were used for debugging and they seemed to confuse users
   into believing they should see some terminal output.
2012-06-11 11:07:42 -04:00
Nilay Vaish
51c23e601e Config: Remove setMipsOptions
As status matrix, MIPS fs does not work. Hence, these options are not
required. Secondly, the function is setting param values for a CPU class.
This seems strange, should probably be done in a different way.
2012-06-07 08:05:30 -05:00
Nilay Vaish
78a72d6972 Config: changes to a couple of error msgs 2012-06-07 08:05:30 -05:00
Andreas Hansson
0d32940711 Bus: Split the bus into a non-coherent and coherent bus
This patch introduces a class hierarchy of buses, a non-coherent one,
and a coherent one, splitting the existing bus functionality. By doing
so it also enables further specialisation of the two types of buses.

A non-coherent bus connects a number of non-snooping masters and
slaves, and routes the request and response packets based on the
address. The request packets issued by the master connected to a
non-coherent bus could still snoop in caches attached to a coherent
bus, as is the case with the I/O bus and memory bus in most system
configurations. No snoops will, however, reach any master on the
non-coherent bus itself. The non-coherent bus can be used as a
template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses,
and is typically used for the I/O buses.

A coherent bus connects a number of (potentially) snooping masters and
slaves, and routes the request and response packets based on the
address, and also forwards all requests to the snoopers and deals with
the snoop responses. The coherent bus can be used as a template for
modelling QPI, HyperTransport, ACE and coherent OCP buses, and is
typically used for the L1-to-L2 buses and as the main system
interconnect.

The configuration scripts are updated to use a NoncoherentBus for all
peripheral and I/O buses.

A bit of minor tidying up has also been done.

--HG--
rename : src/mem/bus.cc => src/mem/coherent_bus.cc
rename : src/mem/bus.hh => src/mem/coherent_bus.hh
rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc
rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 13:30:04 -04:00
Jayneel Gandhi
39cbae9581 Config: Fix help msg for option --mem-size 2012-05-03 05:17:29 -05:00
Jayneel Gandhi
b5b9d2ad3e Config: Add command line options for disk image and memory size
Added the options to Options.py for FS mode with backward compatibility. It is
good to provide an option to specify the disk image and the memory size from
command line since a lot of disk images are created to support different
benchmark suites as well as per user needs. Change in program also leads to
change in memory requirements. These options provide the interface to provide
both disk image and memory size from the command line and gives more
flexibility.
2012-04-16 17:51:26 -05:00
Andreas Hansson
b00949d88b MEM: Enable multiple distributed generalized memories
This patch removes the assumption on having on single instance of
PhysicalMemory, and enables a distributed memory where the individual
memories in the system are each responsible for a single contiguous
address range.

All memories inherit from an AbstractMemory that encompasses the basic
behaviuor of a random access memory, and provides untimed access
methods. What was previously called PhysicalMemory is now
SimpleMemory, and a subclass of AbstractMemory. All future types of
memory controllers should inherit from AbstractMemory.

To enable e.g. the atomic CPU and RubyPort to access the now
distributed memory, the system has a wrapper class, called
PhysicalMemory that is aware of all the memories in the system and
their associated address ranges. This class thus acts as an
infinitely-fast bus and performs address decoding for these "shortcut"
accesses. Each memory can specify that it should not be part of the
global address map (used e.g. by the functional memories by some
testers). Moreover, each memory can be configured to be reported to
the OS configuration table, useful for populating ATAG structures, and
any potential ACPI tables.

Checkpointing support currently assumes that all memories have the
same size and organisation when creating and resuming from the
checkpoint. A future patch will enable a more flexible
re-organisation.

--HG--
rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py
rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py
rename : src/mem/physical.cc => src/mem/abstract_mem.cc
rename : src/mem/physical.hh => src/mem/abstract_mem.hh
rename : src/mem/physical.cc => src/mem/simple_mem.cc
rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 13:46:31 -04:00
Nilay Vaish
4f4a710457 Config: corrects the way Ruby attaches to the DMA ports
With recent changes to the memory system, a port cannot be assigned a peer
port twice. While making use of the Ruby memory system in FS mode, DMA
ports were assigned peer twice, once for the classic memory system
and once for the Ruby memory system. This patch removes this double
assignment of peer ports.
2012-04-05 11:09:19 -05:00
Nilay Vaish
390cfc7be9 Config: Change the way options are added
I am not too happy with the way options are added in files se.py and fs.py
currently. This patch moves all the options to the file Options.py, functions
from which are called when required.
2012-03-28 11:01:53 -05:00
Nilay Vaish
6ca3af8ecf Config: Move setWorkCountOptions() to Simulation.py
The function is presently defined in FSConfig.py, which does not seem to be
the correct place for it.
2012-03-27 18:23:21 -05:00
Nilay Vaish
13a5e9b7b5 FSConfig.py: fix a typo makeLinuxAlphaRubySystem 2012-03-16 07:46:45 -05:00
Ali Saidi
d2a0db7fe9 ARM: Fix memory starting at non-zero address and exceeding max mem for a system. 2012-03-09 16:45:47 -05:00
Geoffrey Blake
043709fdfa CheckerCPU: Make CheckerCPU runtime selectable instead of compile selectable
Enables the CheckerCPU to be selected at runtime with the --checker option
from the configs/example/fs.py and configs/example/se.py configuration
files.  Also merges with the SE/FS changes.
2012-03-09 09:59:27 -05:00
Ali Saidi
91b737ed48 ARM: Add support for Versatile Express extended memory map
Also clean up how we create boot loader memory a bit.
2012-03-01 17:26:31 -06:00
Nilay Vaish
c80af04d7d x86: Fix switching of CPUs
This patch prevents creation of interrupt controller for
cpus that will be switched in later
2012-03-01 11:37:02 -06:00
Nilay Vaish
e11847bfa9 Config: make option ruby available always 2012-03-01 11:36:59 -06:00
Gabe Black
5917fb3292 Make the IO bridge accept address headed to all the local APICs. 2012-02-26 15:33:07 -08:00
Andreas Hansson
ac91f90145 Script: Fix the scripts that use the num_cpus cache parameter
This patch merely removes the use of the num_cpus cache parameter
which no longer exists after the introduction of the masterIds. The
affected scripts fail when trying to set the parameter. Note that this
patch does not update the regression stats.
2012-02-14 12:11:18 -05:00
Andreas Hansson
5a9a743cfc MEM: Introduce the master/slave port roles in the Python classes
This patch classifies all ports in Python as either Master or Slave
and enforces a binding of master to slave. Conceptually, a master (such
as a CPU or DMA port) issues requests, and receives responses, and
conversely, a slave (such as a memory or a PIO device) receives
requests and sends back responses. Currently there is no
differentiation between coherent and non-coherent masters and slaves.

The classification as master/slave also involves splitting the dual
role port of the bus into a master and slave port and updating all the
system assembly scripts to use the appropriate port. Similarly, the
interrupt devices have to have their int_port split into a master and
slave port. The intdev and its children have minimal changes to
facilitate the extra port.

Note that this patch does not enforce any port typing in the C++
world, it merely ensures that the Python objects have a notion of the
port roles and are connected in an appropriate manner. This check is
carried when two ports are connected, e.g. bus.master =
memory.port. The following patches will make use of the
classifications and specialise the C++ ports into masters and slaves.
2012-02-13 06:43:09 -05:00
Ali Saidi
67f16a48fb configs: fix minor config bugs posted on the mailing list 2012-02-12 17:18:53 -06:00
Mrinmoy Ghosh
7e104a1af2 prefetcher: Make prefetcher a sim object instead of it being a parameter on cache 2012-02-12 16:07:38 -06:00
Gabe Black
6cae538ce9 X86: Rename the bridge which allows commnication back to the local APICs.
There was a collision with a name used in fs.py, and that causes that script
not to work when used with x86.
2012-02-05 01:37:40 -08:00
Gabe Black
d7f71bf424 SE/FS: Get rid of FULL_SYSTEM in the configs directory 2012-01-28 07:24:50 -08:00
Gabe Black
ec20ee2f7c SE/FS: Make SE vs. FS mode a runtime parameter. 2012-01-28 07:24:34 -08:00
Ronald Dreslinski
38ee552798 configs: actually add ARMv7a-like cpu/cache file 2012-01-26 16:44:43 -05:00
Ronald Dreslinski
fc7cf40de6 configs: A more realistic configuration of an ARM-like processor 2012-01-26 14:53:48 -05:00
Nilay Vaish
24c2300998 Config: Enable using O3 CPU and Ruby in SE mode 2012-01-23 11:33:52 -06:00
Andreas Hansson
55cf3f4ac1 MEM: Removing the default port peer from Python ports
In preparation for the introduction of Master and Slave ports, this
patch removes the default port parameter in the Python port and thus
forces the argument list of the Port to contain only the
description. The drawback at this point is that the config port and
dma port of PCI and DMA devices have to be connected explicitly. This
is key for future diversification as the pio and config port are
slaves, but the dma port is a master.
2012-01-17 12:55:09 -06:00
Andreas Hansson
2208ea049f MEM: Make the bus bridge unidirectional and fixed address range
This patch makes the bus bridge uni-directional and specialises the
bus ports to be a master port and a slave port. This greatly
simplifies the assumptions on both sides as either port only has to
deal with requests or responses. The following patches introduce the
notion of master and slave ports, and would not be possible without
this split of responsibilities.

In making the bridge unidirectional, the address range mechanism of
the bridge is also changed. For the cases where communication is
taking place both ways, an additional bridge is needed. This causes
issues with the existing mechanism, as the busses cannot determine
when to stop iterating the address updates from the two bridges. To
avoid this issue, and also greatly simplify the specification, the
bridge now has a fixed set of address ranges, specified at creation
time.
2012-01-17 12:55:09 -06:00
Andreas Hansson
f85286b3de MEM: Add port proxies instead of non-structural ports
Port proxies are used to replace non-structural ports, and thus enable
all ports in the system to correspond to a structural entity. This has
the advantage of accessing memory through the normal memory subsystem
and thus allowing any constellation of distributed memories, address
maps, etc. Most accesses are done through the "system port" that is
used for loading binaries, debugging etc. For the entities that belong
to the CPU, e.g. threads and thread contexts, they wrap the CPU data
port in a port proxy.

The following replacements are made:
FunctionalPort      > PortProxy
TranslatingPort     > SETranslatingPortProxy
VirtualPort         > FSTranslatingPortProxy

--HG--
rename : src/mem/vport.cc => src/mem/fs_translating_port_proxy.cc
rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh
rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc
rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-17 12:55:08 -06:00
Nilay Vaish
03229f2575 Config: Add support for restoring using a timing CPU
Currently there is an assumption that restoration from a checkpoint will
happen by first restoring to an atomic CPU and then switching to a timing
CPU. This patch adds support for directly restoring to a timing CPU. It
adds a new option '--restore-with-cpu' which is used to specify the type
of CPU to which the checkpoint should be restored to. It defaults to
'atomic' which was the case before.
2012-01-11 13:50:18 -06:00
Nilay Vaish
e4b447754e Config: Remove short option string for cpu type 2012-01-10 06:35:40 -06:00
Ali Saidi
bcb71963eb ARM: Add support for running multiple systems 2012-01-09 18:08:20 -06:00
Ali Saidi
80a6907927 ARM: Add support for initparam m5 op 2012-01-09 18:08:20 -06:00
Ali Saidi
6a6d888ab4 cpu2000: Add missing art benchmark to all 2012-01-09 18:08:20 -06:00
Nilay Vaish
a88ec980a4 Config: Add an option of type 'choice' for cpu type
This patch adds a new option for cpu type. This option is of type 'choice'
which is similar to a C++ enum, except that it takes string values as
possible choices. Following options are being removed -- detailed, timing,
inorder.

--HG--
extra : rebase_source : 58885e2e8a88b6af8e6ff884a5922059dbb1a6cb
2012-01-05 11:04:25 -06:00
Anthony Gutierrez
19e65a6502 ARM: Update config files for Android/BBench images available on website.
--HG--
extra : rebase_source : ca98021c3f96422374fbd4500da312a5a9dd00df
2011-12-15 00:43:35 -05:00
Chander Sudanthi
61c14da751 O3: Remove hardcoded tgts_per_mshr in O3CPU.py.
There are two lines in O3CPU.py that set the dcache and icache
tgts_per_mshr to 20, ignoring any pre-configured value of tgts_per_mshr.
This patch removes these hardcoded lines from O3CPU.py and sets the default
L1 cache mshr targets to 20.

--HG--
extra : rebase_source : 6f92d950e90496a3102967442814e97dc84db08b
2011-12-01 00:15:22 -08:00
Ali Saidi
f2bfef90c4 ARM: Fix small bug in config script that prevents android from booting 2011-10-19 18:08:31 -05:00
Ali Saidi
ba265abbfd ARM: Add some MP regressions and clean up the disk images and kernels a bit 2011-08-19 15:08:09 -05:00
Ali Saidi
2fd2b44b86 ARM: Add VExpress_E support with PCIe to gem5 2011-08-19 15:08:08 -05:00
Ali Saidi
d2a0a2ec22 ARM: Add support for Versatile Express boards 2011-08-19 15:08:08 -05:00
Steve Reinhardt
19bb896bfe config: revamp x86 config to avoid appending to SimObjectVectors
A significant contributor to the need for adoptOrphanParams()
is the practice of appending to SimObjectVectors which have
already been assigned as children.  This practice sidesteps the
assignment operation for those appended SimObjects, which is
where parent/child relationships are typically established.

This patch reworks the config scripts that use append() on
SimObjectVectors, which all happen to be in the x86 system
configuration.  At some point in the future, I hope to make
SimObjectVectors immutable (by deriving from tuple rather than
list), at which time this patch will be necessary for correct
operation.  For now, it just avoids some of the warning
messages that get printed in adoptOrphanParams().
2011-05-23 14:29:23 -07:00
Korey Sewell
b3ff137c8e configs: missed spot progress-interval change 2011-05-23 14:36:22 -04:00
Korey Sewell
9f1b60e05c configs: cleanup redundant/unused options
maxinsts & max_inst redundant
prog_intvl and profile seem redundant, but profile looks to be unused
add -p option for progress intervals
2011-05-20 14:49:06 -04:00
Ali Saidi
cefd6960e5 ARM: Configure bootloader parameters 2011-05-04 20:38:28 -05:00
Nathan Binkert
09064ea552 python: fix another bug from changes to main.py 2011-04-20 19:07:44 -07:00
Ali Saidi
d6289507d8 ARM: Include IDE/CF controller by default in PBX model.
Frame buffer and boot linux:
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxFrameBuf --kernel=vmlinux.touchkit
Linux from a CF card:
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxCflash --kernel=vmlinux.touchkit
Run Android
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmAndroid --kernel=vmlinux.android
Run MP
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxCflash --kernel=vmlinux.mp-2.6.38
2011-04-04 11:42:31 -05:00
Anthony Gutierrez
332adcdd1a Sim: Fix Simulation.py to allow more than 1 core for standard switching.
This patch moves the assignment of testsys.switch_cpus, testsys.switch_cpus_1,
switch_cpu_list, and switch_cpu_list1 outside of the for loop so they are
assigned only once, after switch_cpus and switch_cpus_1 are constructed.
2011-04-04 11:42:31 -05:00
Ali Saidi
887e9e2b99 ARM: Bare metal system should have 256MB of RAM. 2011-03-17 19:20:20 -05:00
Ali Saidi
a432d8e085 Mem: Fix issue with dirty block being lost when entire block transferred to non-cache.
This change fixes the problem for all the cases we actively use. If you want to try
more creative I/O device attachments (E.g. sharing an L2), this won't work. You
would need another level of caching between the I/O device and the cache
(which you actually need anyway with our current code to make sure writes
propagate). This is required so that you can mark the cache in between as
top level and it won't try to send ownership of a block to the I/O device.
Asserts have been added that should catch any issues.
2011-03-17 19:20:19 -05:00
Gabe Black
aa0cd52504 Configs: Explicitly import env in Benchmarks.py
env was being implicitly imported into Benchmarks.py through SysPaths.py.
This change brings it in explicitly in the file where it's used.
2011-02-24 02:14:45 -08:00
Ali Saidi
79dac89552 ARM: Clarifies creation of Linux and baremetal ARM systems.
makeArmSystem creates both bare-metal and Linux systems more cleanly.
machine_type was never optional though listed as an optional argument; a system
such as "RealView_PBX" must now be explicitly specified.  Now that it is a
required argument, the placement of the arguments has changed slightly
requiring some changes to calls that create ARM systems.
2011-02-23 15:10:48 -06:00
Korey Sewell
981e1dd7ee configs: cache: add cache line size option 2011-02-23 14:26:55 -05:00
Korey Sewell
fb92578415 configs: set default cache params
It's confusing (especially to new users), when you are setting some standard
parameters (as defined in Options.py) and they aren't reflected in the simulations
so we might as well link the settings in CacheConfig.py to those in Options.py
2011-02-23 01:01:46 -05:00
Ali Saidi
d33c1d9592 VNC: Add VNC server to M5 2011-02-11 18:29:35 -06:00
Brad Beckmann
6ebd7c390b config: fixed minor bug connecting dma devices to ruby 2011-02-08 15:52:44 -08:00
Gabe Black
f8fc0419c5 X86, Config: Move the setting of work count options to a separate function.
This way things that don't care about work count options and/or aren't called
by something that has those command line options set up doesn't have to build
a fake object to carry in inert values.
2011-02-07 01:22:15 -08:00
Brad Beckmann
dfa8cbeb06 m5: added work completed monitoring support 2011-02-06 22:14:19 -08:00
Brad Beckmann
17b4ef52bb ruby: x86 fs config support 2011-02-06 22:14:18 -08:00
Gabe Black
00f24ae92c Config: Keep track of uncached and cached ports separately.
This makes sure that the address ranges requested for caches and uncached ports
don't conflict with each other, and that accesses which are always uncached
(message signaled interrupts for instance) don't waste time passing through
caches.
2011-02-03 20:23:00 -08:00
Gabe Black
c4b81d311e X86: Change how the default disk image gets set up.
The disk image to use was always being forced to a particular value. This
change changes what disk image is selected as the default based on the
architecture being built. In the future, a more sophisticated system might be
used that selected a path based on certain rules instead of relying on one off
file names.
2011-02-02 18:03:58 -08:00
Gabe Black
119f5f8e94 X86: Add L1 caches for the TLB walkers.
Small L1 caches are connected to the TLB walkers when caches are used. This
allows them to participate in the coherence protocol properly.
2011-02-01 18:28:41 -08:00
Gabe Black
4876e0c92b Config: Change misleading "cycle" message to say "tick".
Most of the messages in the config scripts that report a time value already
print "@ tick" followed by the current tick value, but a few were printing
"@ cycle". Since this is a distinction that's frequently confusing to new
users, this changes those message to the more accurate and consistent "@ tick".
2010-11-17 23:16:19 -05:00
Ali Saidi
d7b8efa0df ARM: Add support for a dumb IDE controller 2010-11-15 14:04:03 -06:00
Ali Saidi
c779af4e12 Mem: Finish half-baked support for mmaping file in physmem.
Physmem has a parameter to be able to mem map a file, however
it isn't actually used. This changeset utilizes the parameter
so a file can be mmapped.
2010-11-08 13:58:24 -06:00
Brad Beckmann
8572d8fd91 config: fixed ruby dma device connections 2010-08-24 13:20:31 -07:00
Ali Saidi
330fada1aa ARM: Add configuration for Linux/Full System 2010-08-23 11:18:40 -05:00
Brad Beckmann
29c45ccd23 ruby: Reduced ruby latencies
The previous slower ruby latencies created a mismatch between the faster M5
cpu models and the much slower ruby memory system.  Specifically smp
interrupts were much slower and infrequent, as well as cpus moving in and out
of spin locks.  The result was many cpus were idle for large periods of time.

These changes fix the latency mismatch.
2010-08-20 11:46:12 -07:00
Brad Beckmann
5c801090a3 config: reorganized how ruby specifies command-line options 2010-08-20 11:44:09 -07:00
Steve Reinhardt
e0754c0f6c misc: add some AMD copyright notices
Meant to add these with the previous batch of csets.
2010-08-17 05:49:05 -07:00
Steve Reinhardt
2519d116c9 sim: fold checkpoint restore code into instantiate()
The separate restoreCheckpoint() call is gone; just pass
the checkpoint dir as an optional arg to instantiate().
This change is a precursor to some more extensive
reworking of the startup code.
2010-08-17 05:17:06 -07:00
Steve Reinhardt
cfaddd5fd3 configs: clean up checkpoint code in Simulation.py
Small change to clean up some redundant code.
Should not have any functional impact.
2010-08-17 05:17:06 -07:00
Steve Reinhardt
1fbe466345 sim: make Python Root object a singleton
Enforce that the Python Root SimObject is instantiated only
once.  The C++ Root object already panics if more than one is
created.  This change avoids the need to track what the root
object is, since it's available from Root.getInstance() (if it
exists).  It's now redundant to have the user pass the root
object to functions like instantiate(), checkpoint(), and
restoreCheckpoint(), so that arg is gone.  Users who use
configs/common/Simulate.py should not notice.
2010-08-17 05:06:22 -07:00
Nathan Binkert
2e9e75447a None, not none 2010-08-08 22:57:16 -07:00
Steve Reinhardt
cbd65e95db util: add a script for testing checkpointing
See comments in util/checkpoint-tester.py for details.
2010-07-05 21:39:38 -07:00
Ali Saidi
3dc6a8070e ARM: fix sizes of structs for ARM Linux 2010-06-02 12:58:17 -05:00
Nathan Binkert
90820ddf02 config: fix assertion for x86 in FSConfig.py 2010-04-18 21:33:59 -07:00
Brad Beckmann
898f1fc4a4 ruby: Reorganized Ruby topology and protocol files
--HG--
rename : configs/ruby/MESI_CMP_directory.py => configs/ruby/protocols/MESI_CMP_directory.py
rename : configs/ruby/MI_example.py => configs/ruby/protocols/MI_example.py
rename : configs/ruby/MOESI_CMP_directory.py => configs/ruby/protocols/MOESI_CMP_directory.py
rename : configs/ruby/MOESI_CMP_token.py => configs/ruby/protocols/MOESI_CMP_token.py
rename : configs/ruby/MOESI_hammer.py => configs/ruby/protocols/MOESI_hammer.py
rename : configs/ruby/networks/MeshDirCorners.py => src/mem/ruby/network/topologies/MeshDirCorners.py
2010-03-21 21:22:22 -07:00
Brad Beckmann
4f044605e8 ruby: Adds configurable bit selection for numa mapping 2010-03-21 21:22:21 -07:00
Brad Beckmann
92cfd1cac7 ruby: Ruby support for sparse memory
The patch includes direct support for the MI example protocol.
2010-03-21 21:22:21 -07:00
Brad Beckmann
d8e1e5abd0 ruby: fixed how ruby_fs creates phsyical memory
Now ruby_fs creates physical memory of the right size.
2010-03-21 21:22:20 -07:00
Lisa Hsu
a70f70ccbf configs: pull out cache configuration code from se.py and fs.py.
Most of these frontend configurations share cache configuration code, pull it out so that
changes to caches don't have to require changing multiple config files.
2010-02-25 10:13:40 -08:00
Brad Beckmann
8dd45674ae ruby: Converted Garnet to M5 configuration 2010-01-29 20:29:32 -08:00
Brad Beckmann
6c867f8263 ruby: Added a mesh topology 2010-01-29 20:29:27 -08:00
Brad Beckmann
d77a9df3c1 ruby: MOESI_CMP_token updates to use the new config system 2010-01-29 20:29:25 -08:00
Brad Beckmann
ce2d13195b ruby: FS support using the new configuration system 2010-01-29 20:29:21 -08:00
Brad Beckmann
dc758641c9 ruby: reorganized ruby python configuration
Reorganized ruby python configuration so that protocol and ruby memory system
configuration code can be shared by multiple front-end configuration files
(i.e. memory tester, full system, and hopefully the regression tester).  This
code works for memory tester, but have not tested fs mode.
2010-01-29 20:29:20 -08:00
Gabe Black
93d89b288f X86: Record the memory mode when building an X86 system. 2009-12-19 01:49:34 -08:00
Brad Beckmann
70a261c0ae m5: Added option to take a checkpoint at the end of simulation 2009-11-18 13:55:58 -08:00
Brad Beckmann
b8c413e993 m5: Moved profile option since Simulation depends on it. 2009-11-18 13:55:58 -08:00
Brad Beckmann
3cf24f9716 ruby: Support for merging ALPHA_FS and ruby
Connects M5 cpu and dma ports directly to ruby sequencers and dma
sequencers.  Rubymem also includes a pio port so that pio requests
and be forwarded to a special pio bus connecting to device pio
ports.
2009-11-18 13:55:58 -08:00
Nathan Binkert
9a8cb7db7e python: Move more code into m5.util allow SCons to use that code.
Get rid of misc.py and just stick misc things in __init__.py
Move utility functions out of SCons files and into m5.util
Move utility type stuff from m5/__init__.py to m5/util/__init__.py
Remove buildEnv from m5 and allow access only from m5.defines
Rename AddToPath to addToPath while we're moving it to m5.util
Rename read_command to readCommand while we're moving it
Rename compare_versions to compareVersions while we're moving it.

--HG--
rename : src/python/m5/convert.py => src/python/m5/util/convert.py
rename : src/python/m5/smartdict.py => src/python/m5/util/smartdict.py
2009-09-22 15:24:16 -07:00
Korey Sewell
7858a8e68f configs: add maxinsts option on command line
-option to allow threads to run to a max_inst_any_thread which is more useful/quicker in a lot of
cases then always having to figure out what tick to run your simulation to.
2009-09-16 09:45:30 -04:00
Korey Sewell
9f90291c54 cpus: fix cpu progress event
this was double scheduling itself (once in constructor and once in cpu code). also add support for stopping / starting
progress events through repeatEvent flag and also changing the interval of the progress event as well
2009-05-05 02:39:05 -04:00
Gabe Black
8d84f81e70 X86, Config: Make makeX86System consider the number of CPUs, and clean up interrupt assignment. 2009-04-26 02:04:32 -07:00
Steve Reinhardt
6629d9b2bc mem: use single BadAddr responder per system.
Previously there was one per bus, which caused some coherence problems
when more than one decided to respond.  Now there is just one on
the main memory bus.  The default bus responder on all other buses
is now the downstream cache's cpu_side port.  Caches no longer need
to do address range filtering; instead, we just have a simple flag
to prevent snoops from propagating to the I/O bus.
2008-07-16 11:10:33 -07:00
Steve Reinhardt
97b6947eb7 Minor tweaks for future Ruby compatibility. 2009-04-21 08:17:36 -07:00
Gabe Black
b8333a5155 X86: Actually put the PCI INTA entry into the MP tables. 2009-04-19 04:15:18 -07:00
Gabe Black
25e223c30f X86: Make E820 report nice, round (and correct) numbers. 2009-04-19 04:14:48 -07:00
Gabe Black
06d25dcd26 X86: Automatically make the IO APIC in an N CPU system have id N+1. 2009-04-19 02:39:19 -07:00
Steve Reinhardt
9b66e82897 configs: Allow M5_CPU2000 env var to set CPU2K binary path.
It would be nice to have a more comprehensive mechanism
but this is a big improvement over manually editing the script.
2009-04-15 12:52:31 -07:00
Gabe Black
eafdf00eb3 X86: Add IRQ4 to the Intel MP tables. 2009-02-25 10:19:06 -08:00
Korey Sewell
cf4a00ca41 Configs: Add support for the InOrder CPU model 2009-02-10 15:49:29 -08:00
Gabe Black
1c5b9773bd X86: Find the natural lpj for this configuration. 2009-02-01 00:29:07 -08:00
Gabe Black
a5ed1590bd X86: Add a root device to the kernel command line. 2009-02-01 00:27:49 -08:00
Gabe Black
70cd5bfce5 X86: Configure the first PCI interrupt. 2009-02-01 00:26:10 -08:00
Gabe Black
18f6c18323 X86: Hook in a hard drive image. 2009-02-01 00:24:26 -08:00
Gabe Black
01679bb416 X86: Take out the IDE noprobe kernel arguments. 2009-02-01 00:20:44 -08:00
Gabe Black
bb7ad80bbe X86: Plug in an IDE controller. 2009-02-01 00:00:03 -08:00
Gabe Black
d08b8e2b82 X86: Add some interrupt info to the intel MP tables. 2009-01-31 23:43:09 -08:00
Ali Saidi
f4291aac25 Errors: Print a URL with a hash of the format string to find more information about an error. 2009-01-30 20:04:15 -05:00
Gabe Black
7b7a92d3f4 X86: Prevent Linux for probing for non-existant IDE controllers. 2009-01-25 20:36:24 -08:00
Gabe Black
ff29e00112 X86: Add entries for the IO APIC to the MP table. 2008-10-11 16:12:34 -07:00
Gabe Black
526933e5d0 X86: Add an Intel MP table to the simulation. 2008-10-11 15:14:37 -07:00
Gabe Black
3af428606a X86: Rename the PC device to Pc.
--HG--
rename : src/dev/x86/PC.py => src/dev/x86/Pc.py
2008-10-11 02:23:40 -07:00
Gabe Black
ec0fb05d64 X86: Turn SMBios structures into simobjects. 2008-10-10 03:50:51 -07:00
Gabe Black
b4dab225fd X86: Split makeLinuxX86System into makeLinuxX86System and makeX86System. 2008-10-10 03:50:30 -07:00
Ali Saidi
3a3e356f4e style: Remove non-leading tabs everywhere they shouldn't be. Developers should configure their editors to not insert tabs 2008-09-10 14:26:15 -04:00
Nathan Binkert
00df9016fe Rename SimConsole to Terminal since it makes more sense
--HG--
rename : src/dev/SimConsole.py => src/dev/Terminal.py
rename : src/dev/simconsole.cc => src/dev/terminal.cc
rename : src/dev/simconsole.hh => src/dev/terminal.hh
2008-06-17 20:29:06 -07:00
Gabe Black
bceaa257a3 X86: Make the e820 table manually or automatically configurable from python. 2008-06-12 00:58:36 -04:00
Gabe Black
561a541797 X86: Force the kernel to use a certain loops per jiffy instead of calculating it. 2008-06-12 00:46:16 -04:00
Gabe Black
f6a97752b0 X86: Make the amount of system memory match the hardcoded e820 info. 2008-06-12 00:45:11 -04:00
Gabe Black
633c585bfa X86: Make the regular console use the serial port as well. 2008-06-12 00:45:01 -04:00
Gabe Black
b0c52885ce X86: Change the Opteron platform to be the PC platform.
--HG--
extra : convert_revision : 2c6ffebbad04a21cef6ba3fbc1803218908a6c37
2008-03-25 02:06:53 -04:00
Ali Saidi
969688154d Simpoints: Fix regression bug/Don't set process.simpoint, if simpoint doesn't exist
--HG--
extra : convert_revision : c156c49668815755c4c788f807e8eba32151aa24
2008-03-15 22:20:09 -04:00
Lisa Hsu
02a56d8d01 Error out if -s is used without --caches (instead of saying you must specify a
CPU).

--HG--
extra : convert_revision : a3b2bfbe7e037146ac08dd08834bf255da692506
2008-02-29 01:49:36 -05:00
Ali Saidi
0273533adb Configs: Make sure options don't conflict
--HG--
extra : convert_revision : dc9b91cf1d8e33c5e68d7faeb45dbe3e7038d14c
2008-02-29 01:23:18 -05:00
Ali Saidi
3cb7df428c Configs: Fix some bugs we introduced in the simpoints code
--HG--
extra : convert_revision : ef22c11cb3242903a484fc05dc0f96d3e5f9af72
2008-02-28 20:39:01 -05:00
Rick Strong
fcfc8b8c4f Configs: Make using Simpoints easier with some config files that support them easily
--HG--
extra : convert_revision : 0f21829306eb68b332f03da410e6c341c8595bdd
2008-02-27 00:35:09 -05:00
Gabe Black
7bde0285e5 X86: Get PCI config space to work, and adjust address space prefix numbering scheme.
--HG--
extra : convert_revision : 2b382f478ee8cde3a35aa4c105196f200bc7afa6
2008-02-26 23:38:01 -05:00
Vilas Sridharan
2e079ce038 add instruction count fast forwaing and max instruction options
--HG--
extra : convert_revision : 8fe45e512229cdc3e0dcd23e3e5c54516c445d0f
2008-02-22 17:48:10 -05:00
Ali Saidi
fc38e9c630 Configs: Change Simulation.py to return a subclass of the CPU models rather than the original class. Without this changes elsewhere in the config script (e.g. the DriveSys frequency can change the TestSys frequency.
--HG--
extra : convert_revision : f972207c616590a60a6e103daa5de469cf124b44
2008-02-14 16:13:50 -05:00