Commit graph

355 commits

Author SHA1 Message Date
Gabe Black
f8fc0419c5 X86, Config: Move the setting of work count options to a separate function.
This way things that don't care about work count options and/or aren't called
by something that has those command line options set up doesn't have to build
a fake object to carry in inert values.
2011-02-07 01:22:15 -08:00
Brad Beckmann
dfa8cbeb06 m5: added work completed monitoring support 2011-02-06 22:14:19 -08:00
Brad Beckmann
17b4ef52bb ruby: x86 fs config support 2011-02-06 22:14:18 -08:00
Gabe Black
00f24ae92c Config: Keep track of uncached and cached ports separately.
This makes sure that the address ranges requested for caches and uncached ports
don't conflict with each other, and that accesses which are always uncached
(message signaled interrupts for instance) don't waste time passing through
caches.
2011-02-03 20:23:00 -08:00
Gabe Black
c4b81d311e X86: Change how the default disk image gets set up.
The disk image to use was always being forced to a particular value. This
change changes what disk image is selected as the default based on the
architecture being built. In the future, a more sophisticated system might be
used that selected a path based on certain rules instead of relying on one off
file names.
2011-02-02 18:03:58 -08:00
Gabe Black
119f5f8e94 X86: Add L1 caches for the TLB walkers.
Small L1 caches are connected to the TLB walkers when caches are used. This
allows them to participate in the coherence protocol properly.
2011-02-01 18:28:41 -08:00
Gabe Black
4876e0c92b Config: Change misleading "cycle" message to say "tick".
Most of the messages in the config scripts that report a time value already
print "@ tick" followed by the current tick value, but a few were printing
"@ cycle". Since this is a distinction that's frequently confusing to new
users, this changes those message to the more accurate and consistent "@ tick".
2010-11-17 23:16:19 -05:00
Ali Saidi
d7b8efa0df ARM: Add support for a dumb IDE controller 2010-11-15 14:04:03 -06:00
Ali Saidi
c779af4e12 Mem: Finish half-baked support for mmaping file in physmem.
Physmem has a parameter to be able to mem map a file, however
it isn't actually used. This changeset utilizes the parameter
so a file can be mmapped.
2010-11-08 13:58:24 -06:00
Brad Beckmann
8572d8fd91 config: fixed ruby dma device connections 2010-08-24 13:20:31 -07:00
Ali Saidi
330fada1aa ARM: Add configuration for Linux/Full System 2010-08-23 11:18:40 -05:00
Brad Beckmann
29c45ccd23 ruby: Reduced ruby latencies
The previous slower ruby latencies created a mismatch between the faster M5
cpu models and the much slower ruby memory system.  Specifically smp
interrupts were much slower and infrequent, as well as cpus moving in and out
of spin locks.  The result was many cpus were idle for large periods of time.

These changes fix the latency mismatch.
2010-08-20 11:46:12 -07:00
Brad Beckmann
5c801090a3 config: reorganized how ruby specifies command-line options 2010-08-20 11:44:09 -07:00
Steve Reinhardt
e0754c0f6c misc: add some AMD copyright notices
Meant to add these with the previous batch of csets.
2010-08-17 05:49:05 -07:00
Steve Reinhardt
2519d116c9 sim: fold checkpoint restore code into instantiate()
The separate restoreCheckpoint() call is gone; just pass
the checkpoint dir as an optional arg to instantiate().
This change is a precursor to some more extensive
reworking of the startup code.
2010-08-17 05:17:06 -07:00
Steve Reinhardt
cfaddd5fd3 configs: clean up checkpoint code in Simulation.py
Small change to clean up some redundant code.
Should not have any functional impact.
2010-08-17 05:17:06 -07:00
Steve Reinhardt
1fbe466345 sim: make Python Root object a singleton
Enforce that the Python Root SimObject is instantiated only
once.  The C++ Root object already panics if more than one is
created.  This change avoids the need to track what the root
object is, since it's available from Root.getInstance() (if it
exists).  It's now redundant to have the user pass the root
object to functions like instantiate(), checkpoint(), and
restoreCheckpoint(), so that arg is gone.  Users who use
configs/common/Simulate.py should not notice.
2010-08-17 05:06:22 -07:00
Nathan Binkert
2e9e75447a None, not none 2010-08-08 22:57:16 -07:00
Steve Reinhardt
cbd65e95db util: add a script for testing checkpointing
See comments in util/checkpoint-tester.py for details.
2010-07-05 21:39:38 -07:00
Ali Saidi
3dc6a8070e ARM: fix sizes of structs for ARM Linux 2010-06-02 12:58:17 -05:00
Nathan Binkert
90820ddf02 config: fix assertion for x86 in FSConfig.py 2010-04-18 21:33:59 -07:00
Brad Beckmann
898f1fc4a4 ruby: Reorganized Ruby topology and protocol files
--HG--
rename : configs/ruby/MESI_CMP_directory.py => configs/ruby/protocols/MESI_CMP_directory.py
rename : configs/ruby/MI_example.py => configs/ruby/protocols/MI_example.py
rename : configs/ruby/MOESI_CMP_directory.py => configs/ruby/protocols/MOESI_CMP_directory.py
rename : configs/ruby/MOESI_CMP_token.py => configs/ruby/protocols/MOESI_CMP_token.py
rename : configs/ruby/MOESI_hammer.py => configs/ruby/protocols/MOESI_hammer.py
rename : configs/ruby/networks/MeshDirCorners.py => src/mem/ruby/network/topologies/MeshDirCorners.py
2010-03-21 21:22:22 -07:00
Brad Beckmann
4f044605e8 ruby: Adds configurable bit selection for numa mapping 2010-03-21 21:22:21 -07:00
Brad Beckmann
92cfd1cac7 ruby: Ruby support for sparse memory
The patch includes direct support for the MI example protocol.
2010-03-21 21:22:21 -07:00
Brad Beckmann
d8e1e5abd0 ruby: fixed how ruby_fs creates phsyical memory
Now ruby_fs creates physical memory of the right size.
2010-03-21 21:22:20 -07:00
Lisa Hsu
a70f70ccbf configs: pull out cache configuration code from se.py and fs.py.
Most of these frontend configurations share cache configuration code, pull it out so that
changes to caches don't have to require changing multiple config files.
2010-02-25 10:13:40 -08:00
Brad Beckmann
8dd45674ae ruby: Converted Garnet to M5 configuration 2010-01-29 20:29:32 -08:00
Brad Beckmann
6c867f8263 ruby: Added a mesh topology 2010-01-29 20:29:27 -08:00
Brad Beckmann
d77a9df3c1 ruby: MOESI_CMP_token updates to use the new config system 2010-01-29 20:29:25 -08:00
Brad Beckmann
ce2d13195b ruby: FS support using the new configuration system 2010-01-29 20:29:21 -08:00
Brad Beckmann
dc758641c9 ruby: reorganized ruby python configuration
Reorganized ruby python configuration so that protocol and ruby memory system
configuration code can be shared by multiple front-end configuration files
(i.e. memory tester, full system, and hopefully the regression tester).  This
code works for memory tester, but have not tested fs mode.
2010-01-29 20:29:20 -08:00
Gabe Black
93d89b288f X86: Record the memory mode when building an X86 system. 2009-12-19 01:49:34 -08:00
Brad Beckmann
70a261c0ae m5: Added option to take a checkpoint at the end of simulation 2009-11-18 13:55:58 -08:00
Brad Beckmann
b8c413e993 m5: Moved profile option since Simulation depends on it. 2009-11-18 13:55:58 -08:00
Brad Beckmann
3cf24f9716 ruby: Support for merging ALPHA_FS and ruby
Connects M5 cpu and dma ports directly to ruby sequencers and dma
sequencers.  Rubymem also includes a pio port so that pio requests
and be forwarded to a special pio bus connecting to device pio
ports.
2009-11-18 13:55:58 -08:00
Nathan Binkert
9a8cb7db7e python: Move more code into m5.util allow SCons to use that code.
Get rid of misc.py and just stick misc things in __init__.py
Move utility functions out of SCons files and into m5.util
Move utility type stuff from m5/__init__.py to m5/util/__init__.py
Remove buildEnv from m5 and allow access only from m5.defines
Rename AddToPath to addToPath while we're moving it to m5.util
Rename read_command to readCommand while we're moving it
Rename compare_versions to compareVersions while we're moving it.

--HG--
rename : src/python/m5/convert.py => src/python/m5/util/convert.py
rename : src/python/m5/smartdict.py => src/python/m5/util/smartdict.py
2009-09-22 15:24:16 -07:00
Korey Sewell
7858a8e68f configs: add maxinsts option on command line
-option to allow threads to run to a max_inst_any_thread which is more useful/quicker in a lot of
cases then always having to figure out what tick to run your simulation to.
2009-09-16 09:45:30 -04:00
Korey Sewell
9f90291c54 cpus: fix cpu progress event
this was double scheduling itself (once in constructor and once in cpu code). also add support for stopping / starting
progress events through repeatEvent flag and also changing the interval of the progress event as well
2009-05-05 02:39:05 -04:00
Gabe Black
8d84f81e70 X86, Config: Make makeX86System consider the number of CPUs, and clean up interrupt assignment. 2009-04-26 02:04:32 -07:00
Steve Reinhardt
6629d9b2bc mem: use single BadAddr responder per system.
Previously there was one per bus, which caused some coherence problems
when more than one decided to respond.  Now there is just one on
the main memory bus.  The default bus responder on all other buses
is now the downstream cache's cpu_side port.  Caches no longer need
to do address range filtering; instead, we just have a simple flag
to prevent snoops from propagating to the I/O bus.
2008-07-16 11:10:33 -07:00
Steve Reinhardt
97b6947eb7 Minor tweaks for future Ruby compatibility. 2009-04-21 08:17:36 -07:00
Gabe Black
b8333a5155 X86: Actually put the PCI INTA entry into the MP tables. 2009-04-19 04:15:18 -07:00
Gabe Black
25e223c30f X86: Make E820 report nice, round (and correct) numbers. 2009-04-19 04:14:48 -07:00
Gabe Black
06d25dcd26 X86: Automatically make the IO APIC in an N CPU system have id N+1. 2009-04-19 02:39:19 -07:00
Steve Reinhardt
9b66e82897 configs: Allow M5_CPU2000 env var to set CPU2K binary path.
It would be nice to have a more comprehensive mechanism
but this is a big improvement over manually editing the script.
2009-04-15 12:52:31 -07:00
Gabe Black
eafdf00eb3 X86: Add IRQ4 to the Intel MP tables. 2009-02-25 10:19:06 -08:00
Korey Sewell
cf4a00ca41 Configs: Add support for the InOrder CPU model 2009-02-10 15:49:29 -08:00
Gabe Black
1c5b9773bd X86: Find the natural lpj for this configuration. 2009-02-01 00:29:07 -08:00
Gabe Black
a5ed1590bd X86: Add a root device to the kernel command line. 2009-02-01 00:27:49 -08:00
Gabe Black
70cd5bfce5 X86: Configure the first PCI interrupt. 2009-02-01 00:26:10 -08:00
Gabe Black
18f6c18323 X86: Hook in a hard drive image. 2009-02-01 00:24:26 -08:00
Gabe Black
01679bb416 X86: Take out the IDE noprobe kernel arguments. 2009-02-01 00:20:44 -08:00
Gabe Black
bb7ad80bbe X86: Plug in an IDE controller. 2009-02-01 00:00:03 -08:00
Gabe Black
d08b8e2b82 X86: Add some interrupt info to the intel MP tables. 2009-01-31 23:43:09 -08:00
Ali Saidi
f4291aac25 Errors: Print a URL with a hash of the format string to find more information about an error. 2009-01-30 20:04:15 -05:00
Gabe Black
7b7a92d3f4 X86: Prevent Linux for probing for non-existant IDE controllers. 2009-01-25 20:36:24 -08:00
Gabe Black
ff29e00112 X86: Add entries for the IO APIC to the MP table. 2008-10-11 16:12:34 -07:00
Gabe Black
526933e5d0 X86: Add an Intel MP table to the simulation. 2008-10-11 15:14:37 -07:00
Gabe Black
3af428606a X86: Rename the PC device to Pc.
--HG--
rename : src/dev/x86/PC.py => src/dev/x86/Pc.py
2008-10-11 02:23:40 -07:00
Gabe Black
ec0fb05d64 X86: Turn SMBios structures into simobjects. 2008-10-10 03:50:51 -07:00
Gabe Black
b4dab225fd X86: Split makeLinuxX86System into makeLinuxX86System and makeX86System. 2008-10-10 03:50:30 -07:00
Ali Saidi
3a3e356f4e style: Remove non-leading tabs everywhere they shouldn't be. Developers should configure their editors to not insert tabs 2008-09-10 14:26:15 -04:00
Nathan Binkert
00df9016fe Rename SimConsole to Terminal since it makes more sense
--HG--
rename : src/dev/SimConsole.py => src/dev/Terminal.py
rename : src/dev/simconsole.cc => src/dev/terminal.cc
rename : src/dev/simconsole.hh => src/dev/terminal.hh
2008-06-17 20:29:06 -07:00
Gabe Black
bceaa257a3 X86: Make the e820 table manually or automatically configurable from python. 2008-06-12 00:58:36 -04:00
Gabe Black
561a541797 X86: Force the kernel to use a certain loops per jiffy instead of calculating it. 2008-06-12 00:46:16 -04:00
Gabe Black
f6a97752b0 X86: Make the amount of system memory match the hardcoded e820 info. 2008-06-12 00:45:11 -04:00
Gabe Black
633c585bfa X86: Make the regular console use the serial port as well. 2008-06-12 00:45:01 -04:00
Gabe Black
b0c52885ce X86: Change the Opteron platform to be the PC platform.
--HG--
extra : convert_revision : 2c6ffebbad04a21cef6ba3fbc1803218908a6c37
2008-03-25 02:06:53 -04:00
Ali Saidi
969688154d Simpoints: Fix regression bug/Don't set process.simpoint, if simpoint doesn't exist
--HG--
extra : convert_revision : c156c49668815755c4c788f807e8eba32151aa24
2008-03-15 22:20:09 -04:00
Lisa Hsu
02a56d8d01 Error out if -s is used without --caches (instead of saying you must specify a
CPU).

--HG--
extra : convert_revision : a3b2bfbe7e037146ac08dd08834bf255da692506
2008-02-29 01:49:36 -05:00
Ali Saidi
0273533adb Configs: Make sure options don't conflict
--HG--
extra : convert_revision : dc9b91cf1d8e33c5e68d7faeb45dbe3e7038d14c
2008-02-29 01:23:18 -05:00
Ali Saidi
3cb7df428c Configs: Fix some bugs we introduced in the simpoints code
--HG--
extra : convert_revision : ef22c11cb3242903a484fc05dc0f96d3e5f9af72
2008-02-28 20:39:01 -05:00
Rick Strong
fcfc8b8c4f Configs: Make using Simpoints easier with some config files that support them easily
--HG--
extra : convert_revision : 0f21829306eb68b332f03da410e6c341c8595bdd
2008-02-27 00:35:09 -05:00
Gabe Black
7bde0285e5 X86: Get PCI config space to work, and adjust address space prefix numbering scheme.
--HG--
extra : convert_revision : 2b382f478ee8cde3a35aa4c105196f200bc7afa6
2008-02-26 23:38:01 -05:00
Vilas Sridharan
2e079ce038 add instruction count fast forwaing and max instruction options
--HG--
extra : convert_revision : 8fe45e512229cdc3e0dcd23e3e5c54516c445d0f
2008-02-22 17:48:10 -05:00
Ali Saidi
fc38e9c630 Configs: Change Simulation.py to return a subclass of the CPU models rather than the original class. Without this changes elsewhere in the config script (e.g. the DriveSys frequency can change the TestSys frequency.
--HG--
extra : convert_revision : f972207c616590a60a6e103daa5de469cf124b44
2008-02-14 16:13:50 -05:00
Gabe Black
657b52fea1 X86: Use the existing boot_osflags instead of duplicating it.
--HG--
extra : convert_revision : e04e438d7d261a61c52b946c23cd126ed648814a
2008-01-21 04:32:34 -05:00
Gabe Black
223e48e6ae X86: Make the IO ports work using extra physical address lines. Add a serial port.
--HG--
extra : convert_revision : a14cb4fc9afedfc0ff58b11a7f8fb5516d462cc6
2008-01-12 06:39:15 -05:00
Ali Saidi
45ea1549c9 Checkpointing: Fix a bug in the simulation script when restoring without standard switch and change some ifs to work with the default port since every port is now connected to something.
--HG--
extra : convert_revision : 72507cf13e58465291b0dce6322e853bee5a2b89
2007-12-18 01:52:57 -05:00
Gabe Black
42ae409746 X86: Move startup code to the system object to initialize a Linux system.
--HG--
extra : convert_revision : a4796c79f41aa8b8f38bf2f628bee8f1b3af64be
2007-12-01 23:09:56 -08:00
Korey Sewell
10e0ae5407 Accidently kept hardcoded memory value in merge. Remove that and now ALPHA_FS quick regressions pass
--HG--
extra : convert_revision : 12582bef9317cd102cafdea9001f45651d34851f
2007-11-16 19:37:21 -05:00
Korey Sewell
3ee0433f7c compile-time fix for setMipsOptions function
--HG--
extra : convert_revision : e008f6d314d4891cb6ddc9cbf96fbcc6eee53b35
2007-11-16 19:15:20 -05:00
Korey Sewell
9cff176bbc add setMipsOptions function for MIPS usage
--HG--
extra : convert_revision : 42909d66a46201757cbdb14f75cccbd6b27d1f18
2007-11-15 14:20:41 -05:00
Korey Sewell
2692590049 Add in files from merge-bare-iron, get them compiling in FS and SE mode
--HG--
extra : convert_revision : d4e19afda897bc3797868b40469ce2ec7ec7d251
2007-11-13 16:58:16 -05:00
Ali Saidi
5a4fc93fca Checkpoint: Use checkpoint_dir, if that is not set use outdir (-d), and if that isn't set use cwd.
--HG--
extra : convert_revision : 6548dd6de376dd59285a37a03bcf2525f8fc3845
2007-11-03 14:41:00 -04:00
Ali Saidi
51345d7324 Checkpoints: Change Simulation.py to not go crazy if the simulation ends before the number of checkpoints requested are created.
--HG--
extra : convert_revision : 865179134a219b34dbbba698e1fa0da7c452e074
2007-10-25 22:20:00 -04:00
Gabe Black
847a18ad48 X86: Adjust the config scripts for x86 fs.
--HG--
extra : convert_revision : 36ed22b50066f54be0e51c3419babc07dd218e10
2007-10-07 17:52:36 -07:00
Ali Saidi
136cb057d4 Checkpointing: Fix directory regex
--HG--
extra : convert_revision : 4d3958eda66209373249e54e7deadd1a7442e828
2007-09-12 15:27:15 -04:00
Ali Saidi
6f9ad931cc Checkpointing: Force drain/resume when switching a CPU
--HG--
extra : convert_revision : 7d9c3f4c8c357e3a9214deba5df3581beeaf7cb6
2007-09-12 15:24:24 -04:00
Ali Saidi
bba265ccd8 PCI: Move PCI Configuration data into devices now that we can inherit parameters.
--HG--
extra : convert_revision : bd2214b28fb46a9a9e9e204e0539be33acb548ad
2007-08-16 16:49:05 -04:00
Ali Saidi
773cb77656 Devices: Make EtherInts connect in the same way memory ports currently do.
--HG--
extra : convert_revision : 765b096785a77df9adc4791c9101b90696bd7be2
2007-08-16 16:49:02 -04:00
Ali Saidi
e9ddc7fbca Regression: fix configuration for SPARC_FS
--HG--
extra : convert_revision : 88aa9649cc1b4d8165616e98880d3d6cd2a75762
2007-08-12 19:44:04 -04:00
Vincentius Robby
ec4000e0e2 Added fastmem option.
Lets CPU accesses to physical memory bypass Bus.

--HG--
extra : convert_revision : e56e3879de47ee10951a19bfcd8b62b6acdfb30c
2007-08-08 18:43:12 -04:00
Ali Saidi
06a9f58c68 DMA: Add IOCache and fix bus bridge to optionally only send requests one
way so a cache can handle partial block requests for i/o devices.

--HG--
extra : convert_revision : a68b5ae826731bc87ed93eb7ef326a2393053964
2007-08-10 16:14:01 -04:00
Steve Reinhardt
07f091d6ed Get rid of remaining traces of obsolete CoherenceProtocol object.
--HG--
extra : convert_revision : c5555b00bef1b304a84886188ad2c0dcb4d7c5b9
2007-06-30 17:59:45 -07:00
Nathan Binkert
d14256f9ba the cmd argument is supposed to be an array of parameters, not one string
--HG--
extra : convert_revision : dffdaa94a1f28f3709515a9eeed420552d8c7b22
2007-06-10 13:57:48 -07:00
Ali Saidi
48133a0f04 fix SPARC....
configs/common/FSConfig.py:
    fix SPARC

--HG--
extra : convert_revision : 34a36c0f626f3fb8a1526ec194a9b0cdae32fed4
2007-06-04 12:03:38 -04:00
Nathan Binkert
35147170f9 Move SimObject python files alongside the C++ and fix
the SConscript files so that only the objects that are
actually available in a given build are compiled in.
Remove a bunch of files that aren't used anymore.

--HG--
rename : src/python/m5/objects/AlphaTLB.py => src/arch/alpha/AlphaTLB.py
rename : src/python/m5/objects/SparcTLB.py => src/arch/sparc/SparcTLB.py
rename : src/python/m5/objects/BaseCPU.py => src/cpu/BaseCPU.py
rename : src/python/m5/objects/FuncUnit.py => src/cpu/FuncUnit.py
rename : src/python/m5/objects/IntrControl.py => src/cpu/IntrControl.py
rename : src/python/m5/objects/MemTest.py => src/cpu/memtest/MemTest.py
rename : src/python/m5/objects/FUPool.py => src/cpu/o3/FUPool.py
rename : src/python/m5/objects/FuncUnitConfig.py => src/cpu/o3/FuncUnitConfig.py
rename : src/python/m5/objects/O3CPU.py => src/cpu/o3/O3CPU.py
rename : src/python/m5/objects/OzoneCPU.py => src/cpu/ozone/OzoneCPU.py
rename : src/python/m5/objects/SimpleOzoneCPU.py => src/cpu/ozone/SimpleOzoneCPU.py
rename : src/python/m5/objects/BadDevice.py => src/dev/BadDevice.py
rename : src/python/m5/objects/Device.py => src/dev/Device.py
rename : src/python/m5/objects/DiskImage.py => src/dev/DiskImage.py
rename : src/python/m5/objects/Ethernet.py => src/dev/Ethernet.py
rename : src/python/m5/objects/Ide.py => src/dev/Ide.py
rename : src/python/m5/objects/Pci.py => src/dev/Pci.py
rename : src/python/m5/objects/Platform.py => src/dev/Platform.py
rename : src/python/m5/objects/SimConsole.py => src/dev/SimConsole.py
rename : src/python/m5/objects/SimpleDisk.py => src/dev/SimpleDisk.py
rename : src/python/m5/objects/Uart.py => src/dev/Uart.py
rename : src/python/m5/objects/AlphaConsole.py => src/dev/alpha/AlphaConsole.py
rename : src/python/m5/objects/Tsunami.py => src/dev/alpha/Tsunami.py
rename : src/python/m5/objects/T1000.py => src/dev/sparc/T1000.py
rename : src/python/m5/objects/Bridge.py => src/mem/Bridge.py
rename : src/python/m5/objects/Bus.py => src/mem/Bus.py
rename : src/python/m5/objects/MemObject.py => src/mem/MemObject.py
rename : src/python/m5/objects/PhysicalMemory.py => src/mem/PhysicalMemory.py
rename : src/python/m5/objects/BaseCache.py => src/mem/cache/BaseCache.py
rename : src/python/m5/objects/CoherenceProtocol.py => src/mem/cache/coherence/CoherenceProtocol.py
rename : src/python/m5/objects/Repl.py => src/mem/cache/tags/Repl.py
rename : src/python/m5/objects/Process.py => src/sim/Process.py
rename : src/python/m5/objects/Root.py => src/sim/Root.py
rename : src/python/m5/objects/System.py => src/sim/System.py
extra : convert_revision : 173f8764bafa8ef899198438fa5573874e407321
2007-05-27 19:21:17 -07:00
Ali Saidi
0934f259d6 add an l2 cache option to se example config
configs/common/Options.py:
configs/example/fs.py:
    move l2 cache option to Options.py

--HG--
extra : convert_revision : 5c0071c2827f7db6d56229d5276326364b50f0c8
2007-05-15 18:06:35 -04:00
Ali Saidi
634d2e9d83 remove hit_latency and make latency do the right thing
set the latency parameter in terms of a latency
add caches to tsunami-simple configs

configs/common/Caches.py:
tests/configs/memtest.py:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
    set the latency parameter in terms of a latency
configs/common/FSConfig.py:
    give the bridge a default latency too
src/mem/cache/cache_builder.cc:
src/python/m5/objects/BaseCache.py:
    remove hit_latency and make latency do the right thing
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
    add caches to tsunami-simple configs

--HG--
extra : convert_revision : 37bef7c652e97c8cdb91f471fba62978f89019f1
2007-05-10 18:24:48 -04:00
Ali Saidi
0dfc29a023 fix partial writes with a functional memory hack
figure out the block size from devices attached to the bus otherwise use a default block size when no devices that care are attached

configs/common/FSConfig.py:
src/mem/bridge.cc:
src/mem/bridge.hh:
src/python/m5/objects/Bridge.py:
    fix partial writes with a functional memory hack
src/mem/bus.cc:
src/mem/bus.hh:
src/python/m5/objects/Bus.py:
    figure out the block size from devices attached to the bus otherwise use a default block size when no devices that care are attached
src/mem/packet.cc:
    fix WriteInvalidateResp to not be a request that needs a response since it isn't
src/mem/port.hh:
    by default return 0 for deviceBlockSize instead of panicing. This makes finding the block size the bus should use easier

--HG--
extra : convert_revision : 3fcfe95f9f392ef76f324ee8bd1d7f6de95c1a64
2007-05-07 14:42:03 -04:00
Ali Saidi
6e60d5c12f add a udp stream benchmark and a udp loopback benchmark
--HG--
extra : convert_revision : 9300c67a1258e57436eba6cbdbed8fdf93fb6e59
2007-04-30 13:08:21 -04:00
Gabe Black
39c4ea3473 Fix mcf benchmark object so it gets the arguments it expects.
--HG--
extra : convert_revision : 47087be1f89699e9f8e0dc023abbf593bc0f6618
2007-03-22 00:10:47 -04:00
Nathan Binkert
d55b25cde6 Move all of the parameters of the Root SimObject so they are
directly configured by python.  Move stuff from root.(cc|hh) to
core.(cc|hh) since it really belogs there now.
In the process, simplify how ticks are used in the python code.

--HG--
extra : convert_revision : cf82ee1ea20f9343924f30bacc2a38d4edee8df3
2007-03-06 11:13:43 -08:00
Ali Saidi
82874eefca Merge zizzer:/bk/newmem
into  zeep.pool:/z/saidi/work/m5.newmem

--HG--
extra : convert_revision : fd6464c9883783c7c2cbefba317f4a0f20dd24cb
2007-03-03 19:03:22 -05:00
Ali Saidi
1694c65ba1 Add Iob and remove the fake device
configs/common/FSConfig.py:
    add an attachOnChipIO to force people to think about where "onchip" i/o should be connected in their hierarchy

--HG--
extra : convert_revision : cf79a9a00760b7daf28063f407a04bd38b956843
2007-03-03 19:02:31 -05:00
Ali Saidi
36f43ff6a5 Implement Niagara I/O interface and rework interrupts
configs/common/FSConfig.py:
    Use binaries we've compiled instead of the ones that come with Legion
src/arch/alpha/interrupts.hh:
    get rid of post(int int_type) and add a get_vec function that gets the interrupt vector for an interrupt number
src/arch/sparc/asi.cc:
    Add AsiIsInterrupt() to AsiIsMmu()
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
    Add InterruptVector type
src/arch/sparc/interrupts.hh:
    rework interrupts. They are no longer cleared when created... A I/O or ASI read/write needs to happen before they are cleared
src/arch/sparc/isa_traits.hh:
    Add the "interrupt" trap types to isa traits
src/arch/sparc/miscregfile.cc:
    add names for all the misc registers and possible post an interrupt when TL is changed.
src/arch/sparc/miscregfile.hh:
    Add a helper function to post an interrupt when pil < some set softint
src/arch/sparc/regfile.cc:
src/arch/sparc/regfile.hh:
    InterruptLevel shouldn't really live here, moved to interrupt.hh
src/arch/sparc/tlb.cc:
    Add interrupt ASIs to TLB
src/arch/sparc/ua2005.cc:
    Add checkSoftInt to check if a softint needs to be posted
    Check that a tickCompare isn't scheduled before scheduling one
    Post and clear interrupts on queue writes and what not
src/base/bitfield.hh:
    Add an helper function to return the msb that is set
src/cpu/base.cc:
src/cpu/base.hh:
    get rid of post_interrupt(type) since it's no longer needed.. Add a way to see what interrupts are pending
src/cpu/intr_control.cc:
src/cpu/intr_control.hh:
src/dev/alpha/tsunami_cchip.cc:
src/python/m5/objects/IntrControl.py:
    Make IntrControl have a system pointer rather than using a cpu pointer to get one
src/dev/sparc/SConscript:
    add iob to SConsscrip
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.out:
tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.ini:
tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.out:
    update config.ini/out for intrcntrl not having a cpu pointer anymore

--HG--
extra : convert_revision : 38614f6b9ffc8f3c93949a94ff04b7d2987168dd
2007-03-03 17:22:47 -05:00
Gabe Black
4b4b46ea90 Keep around which input set was used for a benchmark, and make vortex work with SPARC.
--HG--
extra : convert_revision : c891435a31e81fb8294484aedf340c0c96c8afa2
2007-03-03 03:34:53 +00:00
Nathan Binkert
fa4c3d74fe Get rid of the ConsoleListener SimObject and just fold the
relevant code directly into the SimConsole object.  Now,
you can easily turn off the listen port by just specifying
0 as the port.

--HG--
extra : convert_revision : c8937fa45b429d8a0728e6c720a599e38972aaf0
2007-02-21 22:14:11 -08:00
Ali Saidi
3fa5816dcf fix some checkpointing annoyances
-m works as you think it should
Ctrl-C actually ends the simulation now

--HG--
extra : convert_revision : f2269dc90d165c716459ec61f5f7b1ea3c1d4ae2
2007-01-30 18:21:42 -05:00
Ali Saidi
7933aade85 add memory mapped disk device
configs/common/FSConfig.py:
src/python/m5/objects/T1000.py:
    add configuration for memory mapped disk
src/dev/sparc/SConscript:
    add memory mapped disk to sconscript

--HG--
extra : convert_revision : d8df4a455cf48000042d0ff93a274985f4dbe905
2007-01-09 22:16:49 -05:00
Ali Saidi
ecbb8debf6 Many more fixes for SPARC_FS. Gets us to the point where SOFTINT starts
getting touched.

configs/common/FSConfig.py:
    Physical memory on the T1 starts at 1MB, The first megabyte is unmapped to catch bugs
src/arch/isa_parser.py:
    we should readmiscregwitheffect not readmiscreg
src/arch/sparc/asi.cc:
    Fix AsiIsNucleus spelling with respect to header file
    Add ASI_LSU_CONTROL_REG to AsiSiMmu
src/arch/sparc/asi.hh:
    Fix spelling of two ASIs
src/arch/sparc/isa/decoder.isa:
    switch back to defaults letting the isa_parser insert readMiscRegWithEffect
src/arch/sparc/isa/formats/mem/util.isa:
    Flesh out priviledgedString with hypervisor checks
    Make load alternate set the flags correctly
src/arch/sparc/miscregfile.cc:
    insert some forgotten break statements
src/arch/sparc/miscregfile.hh:
    Add some comments to make it easier to find which misc register is which number
src/arch/sparc/tlb.cc:
    flesh out the tlb memory mapped registers a lot more
src/base/traceflags.py:
    add an IPR traceflag
src/mem/request.hh:
    Fix a bad assert() in request

--HG--
extra : convert_revision : 1e11aa004e8f42c156e224c1d30d49479ebeed28
2006-12-06 14:29:10 -05:00
Ali Saidi
92c5a5c8cb More changes to get SPARC fs closer. Now at 1.2M cycles before difference
configs/common/FSConfig.py:
    seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
    change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
    For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
    Use instruction count from cpu rather than cycles because that is what legion does
    we can change it back after were done with legion
src/base/bitfield.hh:
    add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
    add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
    compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
    change asserts of packet success to if panics wrapped with NDEBUG defines
    so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
    expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
    convert some tabs to spaces
src/python/m5/objects/T1000.py:
    add more fake devices for each l1 bank and each memory controller

--HG--
extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
2006-12-04 00:54:40 -05:00
Ali Saidi
8c4f7a0404 Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
Add the ability to use an address mask for symbol loading
Rather then silently failing on platform accesses panic
Move BadAddr/IsaFake no Device from Tsunami
Let the system kernel be none, but warn about it

configs/common/FSConfig.py:
    We don't have a kernel for sparc yet
src/arch/sparc/system.cc:
    Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
src/base/loader/aout_object.cc:
src/base/loader/aout_object.hh:
src/base/loader/ecoff_object.cc:
src/base/loader/ecoff_object.hh:
src/base/loader/elf_object.cc:
src/base/loader/elf_object.hh:
src/base/loader/object_file.hh:
src/base/loader/raw_object.cc:
src/base/loader/raw_object.hh:
    Add the ability to use an address mask for symbol loading
src/dev/sparc/t1000.cc:
    Rather then silently failing on platform accesses panic
src/dev/sparc/t1000.hh:
    fix up a couple of platform comments
src/python/m5/objects/Bus.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/T1000.py:
src/python/m5/objects/Tsunami.py:
    Move BadAddr/IsaFake no Device from Tsunami
src/python/m5/objects/System.py:
    Let kernel be none
src/sim/system.cc:
    Let the system kernel be none, but warn about it

--HG--
extra : convert_revision : 92f6afef599a3d3c7c5026d03434102c41c7b5f4
2006-11-30 15:51:54 -05:00
Gabe Black
5bdf4400b2 Merge zizzer:/bk/sparcfs
into  zower.eecs.umich.edu:/eecshome/m5/newmemmid

src/arch/sparc/isa_traits.hh:
src/arch/sparc/miscregfile.hh:
    hand merge

--HG--
extra : convert_revision : 34f50dc5e6e22096cb2c08b5888f2b0fcd418f3e
2006-11-29 17:34:20 -05:00
Kevin Lim
07e525e8b7 Include check for making sure caches are enabled.
--HG--
extra : convert_revision : e3902b065db524ebe5bf762e44a840133ccb8d75
2006-11-26 11:46:58 -05:00
Gabe Black
f85082e0a0 Added a parameter to set memory to zero. This is to support Legion, and once we can make our own hypervisor binary, we probably won't need it.
--HG--
extra : convert_revision : 168883e4a5d3760962cd9759a6f41c66f5a6402a
2006-11-22 23:09:27 -05:00
Gabe Black
0a99750ebf Merge zizzer:/bk/sparcfs
into  zower.eecs.umich.edu:/eecshome/m5/newmem

--HG--
extra : convert_revision : 75f3398e38e18eb1f8248e23708d7a8d8cce0fc5
2006-11-22 15:45:32 -05:00
Gabe Black
cd2727694d Add in rom/rams for the nvram, hypervisor description, and partition description.
--HG--
extra : convert_revision : a49de5fcfbea307c971964b8a68b95eb5d9a2bf4
2006-11-20 17:59:35 -05:00
Nathan Binkert
bd8cc37650 Implement a single config file to encompass all of the SPEC
CPU2000 stuff, and use it in all of the tests that currently
use SPEC

--HG--
extra : convert_revision : 8cd26a597e51a90b6d2810d344a075f5aa0f011b
2006-11-16 13:10:38 -08:00
Gabe Black
74654ddd1f Merge zower.eecs.umich.edu:/home/gblack/m5/newmemmemops
into  zower.eecs.umich.edu:/eecshome/m5/newmem

--HG--
extra : convert_revision : 74b2352b8f088e38cd1ecf3a8233b45df0476d93
2006-11-16 14:42:44 -05:00
Gabe Black
cd5b33b9ff Fixes for SPARC_FS
configs/common/FSConfig.py:
    Make a SPARC system create an IO bus.
src/python/m5/objects/T1000.py:
    Create a T1000 platform
src/arch/sparc/miscregfile.cc:
    Initialize the strand status register to the value legion provides.
src/cpu/exetrace.cc:
    Truncate an ExtMachInst to a MachInst before comparing with Legion.

--HG--
extra : convert_revision : e4189b572a5297e8362f5bd26d87b74736c8e5f1
2006-11-16 12:34:10 -05:00
Ron Dreslinski
dbdf2f14ae Add L2 cache option to fs.py --l2cache
--HG--
extra : convert_revision : 5bdd1129c3b23e91d441e7b83f6a824ef7740fab
2006-11-15 18:22:15 -05:00
Kevin Lim
73581bf801 Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix

--HG--
extra : convert_revision : 56cb7fe3be5b63bd89b48ac6cb88b47d13b4c137
2006-11-10 12:14:38 -05:00
Ali Saidi
cb172d0332 Get SPARC to the point that it starts running. Add ability to load the ROM bin files, cleanup lockstep printing a bit
Since we don't have a platform yet, you need to comment out the default responder stuff in Bus.py to make it work.

SConstruct:
    Add TARGET_ISA to the list of environment variables that end up in the build_env for python
configs/common/FSConfig.py:
    add a simple SPARC system to being testing with, you'll need to change makeLinuxAlphaSystem to makeSparcSystem in fs.py for now
src/SConscript:
    add a raw file object, at least until we get more info about how to compile openboot properly
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
    add parameters for ROM files (OBP/Reset/Hypervisor), a ROM, load files into ROM
src/base/loader/object_file.cc:
src/base/loader/object_file.hh:
    add option to try raw when nothing works
src/cpu/exetrace.cc:
    cleanup lockstep printing a little bit
src/cpu/m5legion_interface.h:
    change the instruction to be 32 bits because it is
src/mem/physical.cc:
    fix assert that doesn't work if memory starts somewhere above 0
src/python/m5/objects/BaseCPU.py:
    Add if statement to choose between sparc tlbs and alpha tlbs
src/python/m5/objects/System.py:
    Add a sparc system that sets the rom addresses correctly
src/python/m5/params.py:
    add the ability to add Addr() together

--HG--
extra : convert_revision : bbbd8a56134f2dda2728091f740e2f7119b0c4af
2006-11-09 18:22:46 -05:00
Kevin Lim
6591ebb098 Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix

--HG--
extra : convert_revision : dafe2d4a032b277c219ea13faf20567c20c1f2f4
2006-11-09 15:06:00 -05:00
Kevin Lim
0ba2cc6571 Clean up config scripts to not have to worry about attaching a cache only to the TimingCPU. Now the Atomic CPU works with caches.
configs/common/Simulation.py:
    Atomic CPU now works properly with caches, so we don't have to do extra parsing to hook up caches only to the timing CPU.

    However the O3CPU must always use caches, so a check for that must still exist.

    Also change the switch_cpus to be placed at the system level, now that Steve changed how the IntrController gets its CPU.
configs/example/fs.py:
configs/example/se.py:
    Atomic CPU now handles caches.

--HG--
extra : convert_revision : 534ded558ef96cafd76b4b5c5317bd8f4d05076e
2006-11-09 15:05:13 -05:00
Lisa Hsu
64c0d82dec simplify maxtick parsing in both the python and the c++.
configs/common/Simulation.py:
    simplify maxtick code a little bit - instead of checking for -1, just set it at MaxTick.
src/python/m5/__init__.py:
    make a new m5 param called MaxTick.
src/sim/host.hh:
    fix the M5 def. of MaxTick
src/sim/main.cc:
    Simplify the MaxTick/num_cycles parsing within main.cc

--HG--
extra : convert_revision : f800addfbc1323591c2e05b892276b439b671668
2006-11-08 15:05:23 -05:00
Lisa Hsu
5a46f336a1 make rcS files read from the m5 source directory, not /dist.
--HG--
extra : convert_revision : 45a2dbf5b05b19dd60fbc3a5b10e9355c8351e3b
2006-11-08 14:10:25 -05:00
Lisa Hsu
0a0d9cd3ab change to os.path.join like nate wanted.
--HG--
extra : convert_revision : 6e8a0153adf04f0cc07904434e4cb6a83fe900eb
2006-11-08 14:01:23 -05:00
Lisa Hsu
74ff45d353 factor some more commone code and enable going from checkpoint into arbitrary CPU with or without caches.
configs/common/Simulation.py:
    enable going from checkpoint into arbitrary CPU with or without caches.

--HG--
extra : convert_revision : 02e7ff8982fdb3a08bc609f89bd58df5b3a581b2
2006-11-01 19:25:09 -05:00
Lisa Hsu
7665be4f70 make it so that you can do a standard switch without the caches option. this will have only the o3 cpu have a cache, rather than timing (warmup) + o3 have cache.
--HG--
extra : convert_revision : d733de7ebb362bbd7376a0235ee7f117df2d6d37
2006-11-01 11:49:39 -05:00
Lisa Hsu
9ef8bf74c7 change name of 2nd switch_cpu so that ckpt recovery with multiple cpus doens't get confused.
--HG--
extra : convert_revision : 16c710c4196c520d03c1993a26f38cf1f04ab637
2006-11-01 11:40:49 -05:00
Kevin Lim
f763864786 Fix up configs.
configs/common/Simulation.py:
    Remove mem parameter.
configs/example/se.py:
    Remove debug output that got included in my other push.

--HG--
extra : convert_revision : 643c34147f6c6cbb98b8e6d6e8206b9859593ab0
2006-10-31 14:58:09 -05:00
Lisa Hsu
697b432ba8 FSConfig.py:
Accidentally committed this last time

configs/common/FSConfig.py:
    Accidentally committed this last time

--HG--
extra : convert_revision : 32d49c17c661b57a9aa9c3b057258f6e037ba745
2006-10-30 16:55:52 -05:00
Lisa Hsu
580c8421ab se.py, fs.py:
import Caches
Simulation.py:
Fix typo - L2Cache --> L1Cache

configs/common/Simulation.py:
    Fix typo - L2Cache --> L1Cache
configs/example/fs.py:
configs/example/se.py:
    import Caches

--HG--
extra : convert_revision : 4292225b322c069665262eab7c83b5341844fba0
2006-10-30 16:51:46 -05:00
Lisa Hsu
fe2698c435 ensure that there is a "/" between the cptdir and the cpt.%d.
--HG--
extra : convert_revision : 9aed7c3aecad10b039f3cfb26e04a7950be6bed1
2006-10-30 14:19:16 -05:00
Lisa Hsu
883f0394f5 decouple the switch option from the warmup period option - parsing was confused otherwise, oops.
--HG--
extra : convert_revision : 951fc664c59363df5f5e026aa791d83c26f050ec
2006-10-30 14:12:15 -05:00
Lisa Hsu
b40af2328a add some comments and make the warmup period in a switchover parameterizable.
configs/common/Options.py:
    make the warmup period in a standard switch part of the option.
configs/common/Simulation.py:
    add some comments and also make the warmup period an option.

--HG--
extra : convert_revision : 0fa587291b97ff87c3b3a617e7359ac6d9bed7a5
2006-10-30 13:33:27 -05:00
Lisa Hsu
a6fd29ddf9 factor out common run code from se.py and fs.py.
configs/example/fs.py:
    factor out common code.
configs/example/se.py:
    factor out common code

--HG--
extra : convert_revision : 72a1f653c84eae1b7d281e0a5e60ee116ad6b27d
2006-10-27 16:32:26 -04:00
Steve Reinhardt
d2856c2fde Add mutex test to Benchmarks.py.
--HG--
extra : convert_revision : 9b4f1ce9a181ac5a01e5b6a68067079969dfe9ce
2006-10-22 12:52:58 -04:00
Steve Reinhardt
96737c8a9b Rename 'Machine' to 'SysConfig'.
Clean up a little.

--HG--
extra : convert_revision : db5f36776209c76a593205c46b08aa147358f33a
2006-10-17 11:08:49 -07:00
Kevin Lim
e5b13138b1 Two minor fixes.
configs/common/SysPaths.py:
    Undo accidental change.
src/SConscript:
    Fix.

--HG--
extra : convert_revision : 665b186cff7d8ae560601ced7ae407a41a16cfea
2006-10-10 01:49:46 -04:00
Kevin Lim
8949d813ff Clean up configs.
configs/common/FSConfig.py:
configs/common/SysPaths.py:
configs/example/fs.py:
configs/example/se.py:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
    Clean up configs by removing FullO3Config and instead using default values.
src/python/m5/objects/FUPool.py:
    Add in default FUPool.
src/python/m5/objects/O3CPU.py:
    Use defaults better.  Also set checker parameters, and fix up a config bug.

--HG--
extra : convert_revision : 5fd0c000143f4881f10a9a575c3810dc97cb290b
2006-10-08 01:12:42 -04:00
Ali Saidi
44c6f953b0 Merge zizzer:/bk/newmem
into  zeep.pool:/z/saidi/work/m5.newmem.head

--HG--
extra : convert_revision : 14ac24236ff65b7e489c1ce4b4e9a295966013b8
2006-09-11 17:57:30 -04:00
Ali Saidi
46502851ab add annotation code to m5
configs/common/Benchmarks.py:
    add annotate test app
src/SConscript:
    add annotate.cc to lis
src/arch/alpha/isa/decoder.isa:
    add annotate instructions
src/base/traceflags.py:
    Add annotate trace flag
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
    add annotate pseudo ops
util/m5/m5op.S:
util/m5/m5op.h:
    add anotate ops

--HG--
extra : convert_revision : 7f965c0d84e41ce34f2ec8ec27a009276d67d8d6
2006-09-11 17:57:20 -04:00
Steve Reinhardt
545cbec5f7 Enable proxies (Self/Parent) for specifying ports.
Significant revamp of Port code.
Some cleanup of SimObject code too, particularly to
make the SimObject and MetaSimObject implementations of
__setattr__ more consistent.
Unproxy code split out of print_ini().

src/python/m5/multidict.py:
    Make get() return None by default, to match semantics
    of built-in dictionary objects.

--HG--
extra : convert_revision : db73b6cdd004a82a08b2402afd1e16544cb902a4
2006-09-05 22:04:34 -07:00
Ali Saidi
76ab1c466c add etherdump file option
--HG--
extra : convert_revision : 6b62398778208bc4e64582e06fb73b71a94f3014
2006-08-16 22:17:23 -04:00
Steve Reinhardt
bd4ccd6e39 Finish test clean-up & reorg.
configs/common/FSConfig.py:
    Add default Machine() param
configs/example/fs.py:
configs/example/se.py:
    make it work again
src/python/m5/objects/BaseCPU.py:
    Make mem PhysicalMemory so that a Parent.any proxy works well
src/sim/process.cc:
    Increase default stack size so we don't get an
    'increasing stack' message on 'hello world'
tests/SConscript:
    Add full list of current configs.
tests/configs/simple-atomic.py:
tests/configs/simple-timing.py:
    don't need SEConfig anymore
tests/quick/00.hello/test.py:
tests/quick/20.eio-short/test.py:
    fix
tests/run.py:
    move configs to separate dir

--HG--
rename : configs/test/fs.py => configs/example/fs.py
rename : configs/test/test.py => configs/example/se.py
rename : tests/simple-atomic.py => tests/configs/simple-atomic.py
rename : tests/simple-timing.py => tests/configs/simple-timing.py
rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini
rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out
rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console
rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt
rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr
rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout
rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini
rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out
rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console
rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt
rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr
rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout
rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini
rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out
rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console
rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt
rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr
rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout
rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello
rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello
extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16 14:42:44 -04:00
Steve Reinhardt
2552e68eb6 More restructuring of regression tests.
Moving work back to zizzer...

configs/common/FSConfig.py:
configs/test/fs.py:
    Move CPU connections out of makeLinuxAlphaSystem()
src/python/m5/objects/BaseCPU.py:
    Create default TLBs in full system.
    Move utility cache functions here.
src/python/m5/objects/O3CPU.py:
    Add _mem_ports
tests/run.py:
    Add binpath()
    Change maxtick default to 'forever'
tests/simple-atomic.py:
    Use connectmemPorts()
tests/simple-timing.py:
    Fix up.

--HG--
rename : tests/quick/eio1/ref/alpha/eio/detailed/config.ini => tests/quick/20.eio-short/ref/alpha/eio/detailed/config.ini
rename : tests/quick/eio1/ref/alpha/eio/detailed/config.out => tests/quick/20.eio-short/ref/alpha/eio/detailed/config.out
rename : tests/quick/eio1/ref/alpha/eio/detailed/m5stats.txt => tests/quick/20.eio-short/ref/alpha/eio/detailed/m5stats.txt
rename : tests/quick/eio1/ref/alpha/eio/detailed/stderr => tests/quick/20.eio-short/ref/alpha/eio/detailed/stderr
rename : tests/quick/eio1/ref/alpha/eio/detailed/stdout => tests/quick/20.eio-short/ref/alpha/eio/detailed/stdout
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/config.ini => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/config.ini
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/config.out => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/config.out
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/m5stats.txt => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/m5stats.txt
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/stderr => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/stderr
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/stdout => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/stdout
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/config.ini => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/config.ini
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/config.out => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/config.out
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/m5stats.txt => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/m5stats.txt
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/stderr => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/stderr
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/stdout => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/stdout
rename : tests/quick/eio1/test.py => tests/quick/20.eio-short/test.py
rename : configs/test/hello => tests/test-progs/hello/bin/alpha/linux/hello
rename : configs/test/hello_mips => tests/test-progs/hello/bin/mips/linux/hello_mips
rename : configs/test/sparc_tests/hello_sparc => tests/test-progs/hello/bin/sparc/bin
extra : convert_revision : 1f891392ecc11ffcc3b3182fa673c401c0efc8a5
2006-08-16 09:52:05 -07:00
Ali Saidi
de29f555c4 implement benchmark selection code
--HG--
extra : convert_revision : 84632fdad7019e177e61c56ae30ea2f3fdbc0995
2006-08-15 19:12:19 -04:00
Kevin Lim
08c0919b43 Clean up some more config stuff.
configs/common/FSConfig.py:
    Clean up some code to make functions look less like classes.  Also put makeList function (formerly listWrapper) into m5 itself.
configs/test/fs.py:
    Update for changed code.
src/python/m5/__init__.py:
    Put makeList into m5.

--HG--
extra : convert_revision : 731806a7486f9abf986f52926126df666b024b1d
2006-07-27 17:49:00 -04:00
Kevin Lim
7ccdb7accc Last minute check in. Very few functional changes other than some minor config updates. Also include some recently generated stats.
SConstruct:
    Make test CPUs option non-sticky.
configs/common/FSConfig.py:
    Be sure to set the memory mode.
configs/test/fs.py:
    Wrong string.
tests/SConscript:
    Only test valid CPUs that have been compiled in.
tests/test1/ref/alpha/atomic/config.ini:
tests/test1/ref/alpha/atomic/config.out:
tests/test1/ref/alpha/atomic/m5stats.txt:
tests/test1/ref/alpha/atomic/stdout:
tests/test1/ref/alpha/detailed/config.ini:
tests/test1/ref/alpha/detailed/config.out:
tests/test1/ref/alpha/detailed/m5stats.txt:
tests/test1/ref/alpha/detailed/stdout:
tests/test1/ref/alpha/timing/config.ini:
tests/test1/ref/alpha/timing/config.out:
tests/test1/ref/alpha/timing/m5stats.txt:
tests/test1/ref/alpha/timing/stdout:
    Update output.

--HG--
extra : convert_revision : 6eee2a5eae0291b5121b41bcd7021179cdd520a3
2006-07-22 15:50:39 -04:00
Kevin Lim
a6c2e5cca0 Rearrange the FS configs to be more shared. Also check in the full-system tests. Reference stats coming soon.
configs/test/fs.py:
    Pull out a lot of common code and put it into configs/common/FSConfig.py.

--HG--
extra : convert_revision : 175b18d75f82ddecbcc9a6418fe40df314db55d5
2006-07-21 15:56:35 -04:00
Kevin Lim
bd33d8d4ac Some reorganization. Options are all handled at the user level script. Move createCpus function (now called connectCpu) to Util.py, where it can be used by other configs.
--HG--
rename : configs/test/SysPaths.py => configs/common/SysPaths.py
extra : convert_revision : 2b1b95c5f29e7ade08b1abd6f24c129d600fe2e8
2006-07-21 15:42:44 -04:00