sanchayanmaity/gem5
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
6222 commits 2 branches 0 tags 204 MiB
Commit graph

2950 commits

Author SHA1 Message Date
Gabe Black
641513fe08 X86: Start implementing the interrupt command register in the local APIC. 2009-04-19 02:43:22 -07:00
Gabe Black
9549694ecd X86: Make code that sends an interrupt from the IO APIC available for IPIs. 2009-04-19 02:42:19 -07:00
Gabe Black
d10195b1a4 CPU: If the simple CPU is already idle, just return from suspendContext, don't assert. 2009-04-19 02:23:29 -07:00
Gabe Black
05b5861419 X86: Condense the startupCPU code. 2009-04-19 02:20:57 -07:00
Gabe Black
f668340f2c X86: Set the local APIC ID to something meaningful. 2009-04-19 02:16:49 -07:00
Gabe Black
79a3a6aecb X86: Don't pretend to be an AMD CPU any more. We're not good enough at it. 2009-04-19 02:06:51 -07:00
Korey Sewell
d8a34a9745 mips-tlb-fix: check for alignment faults.\nMIPS was never updated to use TLBS correcty in SE mode. The error was forwarding translations directly to pageTable. The TLB should check for alignment faults at bare minimum here but in the long run we should be using TLBs in SE mode for MIPS. 2009-04-18 10:42:29 -04:00
Korey Sewell
e501e1af54 mips-syscall: mark with correct flag. \nMIPS was using wrong serialization flag on syscall instructions allowing O3 to handle SE mode syscalls incorrectly and speculate on instructions after a syscall 2009-04-18 10:42:29 -04:00
Korey Sewell
5c1742b822 o3-delay-slot-bpred: fix decode stage handling of uncdtl. branches.\n decode stage was not setting the predicted PC correctly or passing that information back to fetch correctly 2009-04-18 10:42:29 -04:00
Korey Sewell
cc9e834e93 mips-shadowsets: fix calcuations. \n Remove Shadowsets from Int & Arch. Reg Calculations 2009-04-18 10:42:28 -04:00
Steve Reinhardt
14808ecac9 o3, inorder: fix FS bug due to initializing ThreadState to Halted. 
For some reason o3 FS init() only called initCPU if the thread state
was Suspended, which was no longer the case.  There's no apparent
reason to check, so I whacked the test completely rather than
changing the check to Halted.
The inorder init() was also updated to be symmetric, though the
previous code was just a fancy no-op.
 2009-04-17 16:54:58 -07:00
Steve Reinhardt
b146131d18 o3: handle fetch with no active threads correctly. 
This situation can arise now on the first fetch cycle after
the last active thread is halted.  It seems easy enough to
deal with when it happens rather than trying to avoid it.
 2009-04-15 23:12:00 -07:00
Steve Reinhardt
bb974d5a47 o3: fix {read,set}ArchFloatReg* functions. 
Register indices were not being calculated properly.
 2009-04-15 23:10:43 -07:00
Steve Reinhardt
7617dcf736 ThreadState: initialize status to Halted in constructor. 
This provides a common initial status for all threads independent
of CPU model (unlike the prior situation where CPUs initialized
threads to inconsistent states).
This mostly matters for SE mode; in FS mode, ISA-specific startupCPU()
methods generally handle boot-time initialization of thread contexts
(since the right thing to do is ISA-dependent).
 2009-04-15 13:18:24 -07:00
Steve Reinhardt
8882dc1283 Get rid of the Unallocated thread context state. 
Basically merge it in with Halted.
Also had to get rid of a few other functions that
called ThreadContext::deallocate(), including:
 - InOrderCPU's setThreadRescheduleCondition.
 - ThreadContext::exit().  This function was there to avoid terminating
   simulation when one thread out of a multi-thread workload exits, but we
   need to find a better (non-cpu-centric) way.
 2009-04-15 13:13:47 -07:00
Gabe Black
5c79191603 X86: Fix minor bug in the page table walker from TLB shuffling. 2009-04-13 04:14:15 -07:00
Nathan Binkert
c87c9950df stats: disallow duplicate statistic names. 2009-04-08 22:22:50 -07:00
Nathan Binkert
18a30524d6 alpha: get rid of all turbolaser remnants 2009-04-08 22:22:49 -07:00
Nathan Binkert
e0de2c3443 tlb: More fixing of unified TLB 2009-04-08 22:21:27 -07:00
Gabe Black
7b5a96f06b tlb: Don't separate the TLB classes into an instruction TLB and a data TLB 2009-04-08 22:21:27 -07:00
Gabe Black
d080581db1 Merge ARM into the head. ARM will compile but may not actually work. 2009-04-06 10:19:36 -07:00
Stephen Hines
7a7c4c5fca arm: add ARM support to M5 2009-04-05 18:53:15 -07:00
Ali Saidi
639cb0a42d CPA: Fix a typo that managed to sneak in. 2009-03-25 20:06:54 -04:00
Nathan Binkert
4eea8acaf2 stats: fix compiler error 2009-03-16 15:16:58 -07:00
Steve Reinhardt
758bfe4eb5 cache: set dirty bit on swaps (oops!) 2009-03-11 23:05:26 -07:00
Steve Reinhardt
61ff48a1f8 cpu: fix minor endian issue with trace output 
(no functional change)
 2009-03-11 23:05:24 -07:00
Steve Reinhardt
a94c68228a prefetch: don't panic on requests w/o contextID (e.g., writebacks). 2009-03-10 17:37:15 -07:00
Nathan Binkert
ac64586a99 build: fix compiler warnings in g++ 3.4 2009-03-07 21:34:50 -08:00
Steve Reinhardt
4f1855484c Fix up regression execution to better handle tests that end abnormally. 
E.g., mark aborts due to assertion failures as failed tests,
but those that get killed by the user as needing to be rerun, etc.
 2009-03-07 16:58:51 -08:00
Nathan Binkert
ac7bda0212 stats: fix duplicate statistics names. 
This generally requires providing a more meaningful name() function for a
class.
 2009-03-07 14:30:54 -08:00
Nathan Binkert
fcaf1b74b0 stats: cleanup text output stuff and fix mysql output 2009-03-07 14:30:53 -08:00
Nathan Binkert
66a85b54e2 build: fix errors for compilers other than g++ 4.3 2009-03-07 14:30:52 -08:00
Nathan Binkert
6f787e3d36 stats: create an enable phase, and a prepare phase. 
Enable more or less takes the place of check, but also allows stats to
do some other configuration.  Prepare moves all of the code that readies
a stat for dumping into a separate function in preparation for supporting
serialization of certain pieces of statistics data.
While we're at it, clean up the visitor code and some of the python code.
 2009-03-05 19:09:53 -08:00
Nathan Binkert
9f45fbaaa6 stats: clean up how templates are used on the data side. 
This basically works by taking advantage of the curiously recurring template
pattern in an intelligent way so as to reduce the number of lines of code
and hopefully make things a little bit clearer.
 2009-03-05 19:09:53 -08:00
Nathan Binkert
cc95b57390 stats: Fix all stats usages to deal with template fixes 2009-03-05 19:09:53 -08:00
Nathan Binkert
c7e82f965f stats: remove the template wart left over from the ancient binning stuff 2009-03-05 19:09:53 -08:00
Nathan Binkert
244c2a517a stats: stick the distribution's fancy parameter into the parameters structure. 2009-03-05 19:09:53 -08:00
Nathan Binkert
e19fd1d521 stats: Add a wrapper class for the information side of things. 
This provides an easy way to provide the callbacks into the data side
of things from the info side of things.  Rename Wrap to DataWrap so it
is more easily distinguishable from InfoWrap
 2009-03-05 19:09:53 -08:00
Nathan Binkert
c7bd1ec261 stats: better naming of template parameters for the wrapper stuff 
Parent and Child are bad names.  Derived and Base are better.
 2009-03-05 19:09:53 -08:00
Nathan Binkert
2dd5a5b3dc stats: get rid of meaningless uses of virtual 2009-03-05 19:09:53 -08:00
Nathan Binkert
ec209953e7 stats: miscellaneous cleanup 2009-03-05 19:09:53 -08:00
Nathan Binkert
a767819d56 serialize: Allow floats and doubles to be serialized 2009-03-05 19:09:53 -08:00
Steve Reinhardt
e3d6e8882e Get rid of 'using namespace' declarations in headers. 2009-03-05 17:15:31 -08:00
Korey Sewell
9e1dc7f205 InOrderCPU: Clean up Constructors to initialize variables correctly (i.e. in a way for the compiler to play *nice*) 2009-03-04 22:37:45 -05:00
Korey Sewell
7c8d544216 Give each resource in InOrder it's own TraceFlag instead of just standard 'Resource' flag 2009-03-04 13:17:09 -05:00
Korey Sewell
30cd2d21fa Remove unused functions/comments cluttering up the code. 2009-03-04 13:17:08 -05:00
Korey Sewell
f69b018571 make handling of interstage buffers (i.e. StageQueues) more consistent: (1)number from 0-n, not 1-n+1, (2) always check nextStageValid before a stageNum+1 and prevStageValid for a stageNum-1 reference (3) add skidSize() to get StageQueue size for all threads 2009-03-04 13:17:07 -05:00
Korey Sewell
f98e9161a8 InOrder didnt have all it's params set to a default value, which is now required for M5 objects; Also, a # of values need to be reset to 0 (or the appropriate value) before we assume they are OK for use. 2009-03-04 13:17:05 -05:00
Korey Sewell
846f953c2b Give TimeBuffer an ID that can be set. Necessary because InOrder uses generic stages so w/o an ID there is no way to differentiate buffers when debugging 2009-03-04 13:16:49 -05:00
Korey Sewell
e4aa4ca40c use numCycles instead of simTicks to determine CPI stat in InOrder 2009-03-04 13:16:48 -05:00
Steve Reinhardt
9ee8e685a4 O3: Make numThreads error message more helpful. 2009-03-04 09:25:53 -05:00
Steve Reinhardt
307905095c Fix Num_Syscall_Descs check bug in non-x86 ISAs. 
(See cset d35d2b28df38 for x86 fix.)
 2009-02-28 20:14:22 -05:00
Nathan Binkert
4523741c1c quell gcc 4.3 warning 2009-02-27 17:29:58 -08:00
Gabe Black
b69a9ad45a X86: Install the exit system call. 2009-02-27 09:26:41 -08:00
Gabe Black
9265b3d598 X86: Install the 32 bit write system call. 2009-02-27 09:26:32 -08:00
Gabe Black
b36f28472d X86: Implement shrd. 2009-02-27 09:26:26 -08:00
Gabe Black
2fe87e62ba X86: Add a structure to allow mapping between the host and guest fstat formats. 2009-02-27 09:26:17 -08:00
Gabe Black
27b751ec46 X86: Don't treat the REX prefixes as prefixes in 32 bit modes. These are inc/dec instructions. 2009-02-27 09:26:09 -08:00
Gabe Black
aa51c01d69 X86: Set address size to 64 bits when generating addresses internally. 2009-02-27 09:26:01 -08:00
Gabe Black
db3c51d3a0 X86: Add a vsyscall page for 32 bit processes to use. 2009-02-27 09:25:51 -08:00
Gabe Black
c3d7d7ed0e X86: Implement sysenter as a system call interface. 2009-02-27 09:25:43 -08:00
Gabe Black
5c1cc99d48 X86: Add a 32 bit mmap2 system call. 2009-02-27 09:25:33 -08:00
Gabe Black
04dbed79f8 X86: Install a 32 bit fstat64 system call. 2009-02-27 09:25:26 -08:00
Gabe Black
8a1eb7e8be X86: Take address size into account when computing an effective address. 2009-02-27 09:25:16 -08:00
Gabe Black
1d18eb9043 X86: Make instructions that use intseg preserve all 8 bytes of their addresses. 2009-02-27 09:25:02 -08:00
Gabe Black
79bc1b3740 X86: Fix a decoder bug and add in some missing instructions. 2009-02-27 09:24:10 -08:00
Gabe Black
3dfa564e70 X86: Respect segment override prefixes even when there's no ModRM byte. 2009-02-27 09:23:58 -08:00
Gabe Black
9dfa3f7f73 X86: Fix segment limit checks. 2009-02-27 09:23:50 -08:00
Gabe Black
9491debaa6 X86: Implement the 32 bit set_thread_area system call. 2009-02-27 09:23:42 -08:00
Gabe Black
1786f20058 X86: Set an initial value for the LDT selector. 2009-02-27 09:23:27 -08:00
Gabe Black
e23d688d8f X86: Set up a space for a GDT in SE so we can set up TLS or LDT segments. 2009-02-27 09:23:17 -08:00
Gabe Black
281ef8111a X86: Compute shift instruction flags correctly. 2009-02-27 09:23:00 -08:00
Gabe Black
14fc06640e X86: Install some 32 bit system calls. 2009-02-27 09:22:50 -08:00
Gabe Black
6ca53f8675 X86: Handle 32 bit system call arguments. 2009-02-27 09:22:30 -08:00
Gabe Black
9a000c5173 Processes: Make getting and setting system call arguments part of a process object. 2009-02-27 09:22:14 -08:00
Gabe Black
60aab03e85 X86: Implement the int system call interface in the decoder. 2009-02-27 09:21:58 -08:00
Gabe Black
05de9f4e2c X86: Distinguish the width of values on the stack between 32 and 64 bit processes. 2009-02-27 09:21:36 -08:00
Gabe Black
932f6440a1 X86: Add a class to support 32 bit x86 linux process. 2009-02-27 09:21:14 -08:00
Ali Saidi
bebbc9dc89 CPA: Add annotations to IGbE and CopyEngine device models. 2009-02-26 19:29:17 -05:00
Ali Saidi
d447ccb2c6 CPA: Add code to automatically record function symbols as CPU executes. 2009-02-26 19:29:17 -05:00
Ali Saidi
6fd4bc34a1 CPA: Add new object for gathering critical path annotations. 2009-02-26 19:29:17 -05:00
Ali Saidi
894925f135 Trace: fix the --trace-start option 2009-02-26 19:29:16 -05:00
Gabe Black
4a64493158 Devices: Make the RTC device reflect the use of BCD in its status registers. 2009-02-25 10:22:49 -08:00
Gabe Black
7400769768 X86: Implement IST stack switching. 2009-02-25 10:22:43 -08:00
Gabe Black
5c546e3504 CPU: Only look up the nearest symbol in the kernel if you're actually in kernel code. 2009-02-25 10:22:36 -08:00
Gabe Black
437b02884d ISA: Get rid of the get*RegName functions. 2009-02-25 10:22:31 -08:00
Gabe Black
3b01535ec1 SPARC: Get rid of the state keeping track of register frames. 2009-02-25 10:22:25 -08:00
Gabe Black
4633677145 ISA: Set up common trace flags for tracing registers. 2009-02-25 10:22:17 -08:00
Gabe Black
44d5351071 ISA: Get rid of FlattenIntIndex function. 2009-02-25 10:22:09 -08:00
Gabe Black
c1c61d52a0 SPARC: Get rid of flattenIndex in the int register file. 2009-02-25 10:21:59 -08:00
Gabe Black
ce2e50a64c ISA: Use the "Stack" traceflag for DPRINTFs about the initial stack frame. 2009-02-25 10:21:52 -08:00
Gabe Black
9d5b6e377f SPARC: Get rid of the setGlobals function. 2009-02-25 10:21:46 -08:00
Gabe Black
f41ce6b5e9 SPARC: Get rid of the setCWP function. 2009-02-25 10:21:40 -08:00
Gabe Black
88ee7d4c32 SPARC: Add a traceflag for register windows. 2009-02-25 10:21:33 -08:00
Gabe Black
7aa875f4f3 X86: Implement the lldt instruction. 2009-02-25 10:21:27 -08:00
Gabe Black
bda7077c64 X86: Add segmentation checks for ldt related descriptors and selectors. 2009-02-25 10:21:21 -08:00
Gabe Black
e08d60389d X86: Make the TSS type check actually return a fault if it fails. 2009-02-25 10:21:14 -08:00
Gabe Black
68300cfb8c X86: Make rdcr use merge and the mov to control register instructions use the right operand size. 2009-02-25 10:21:08 -08:00
Gabe Black
9842f1ca9d X86: Implement CLTS. 2009-02-25 10:21:02 -08:00
Gabe Black
b035c917a5 X86: Make the segment register reading microops use merge. 2009-02-25 10:20:47 -08:00
Gabe Black
28efb3c6e3 X86: Implement the mov to debug register intructions. 2009-02-25 10:20:42 -08:00
Gabe Black
c39ed53d05 X86: Rename oszForPseudoDesc maxOsz to reflect its more general use. 2009-02-25 10:20:30 -08:00
Gabe Black
3ca2451d81 X86: Add code to interpret debug register values. 2009-02-25 10:20:25 -08:00
Gabe Black
1e70401c08 X86: Fix a few bugs with the segment register instructions in real mode. 
Fix a few instances where the register form of zext was used where zexti was
intended. Also get rid of the 64 bit only rip relative addressed version since
64 bit and real mode are mutually exclusive.
 2009-02-25 10:20:19 -08:00
Gabe Black
8813168b5a X86: Do a merge for the zero extension microop. 2009-02-25 10:20:10 -08:00
Gabe Black
28a35a6adb X86: Add microops for reading/writing debug registers. 2009-02-25 10:20:01 -08:00
Gabe Black
11fbed02ea X86: Add classes that break out the bits of the DR6 and DR7 registers. 2009-02-25 10:19:54 -08:00
Gabe Black
cb4141f6e6 X86: Check src1 for illegal values since that's the index we actually use. 2009-02-25 10:19:47 -08:00
Gabe Black
d48214a656 X86: Implement the fence instructions. These are not microcoded. 2009-02-25 10:19:41 -08:00
Gabe Black
9940e21fa9 CPU: Add a flag to identify a read barrier to the static inst class. 2009-02-25 10:19:33 -08:00
Gabe Black
06ff83e1b9 X86: Implement a basic prefetch instruction. 2009-02-25 10:19:22 -08:00
Gabe Black
5f0428ef9f X86: Use the right portion of a register for stores. 2009-02-25 10:19:14 -08:00
Gabe Black
c849ef58c0 X86: Actually check page protections. 2009-02-25 10:18:58 -08:00
Gabe Black
f35a37ca9e X86: Update CS later so stack accesses have the right permission checks. 2009-02-25 10:18:51 -08:00
Gabe Black
da61c4b3ee CPU: Don't fetch when executing a macroop. 
If the CPL changes mid macroop, the end of the instruction might not be
priveleged enough to execute the beginning.
 2009-02-25 10:18:36 -08:00
Gabe Black
ba69184630 X86: Use atCPL0 for accesses that are part of CPU machinery. 2009-02-25 10:18:29 -08:00
Gabe Black
dc53ca89f6 X86: Add a flag to force memory accesses to happen at CPL 0. 2009-02-25 10:18:22 -08:00
Gabe Black
897c374892 X86: Move where CS is set so CPL checks work out. 2009-02-25 10:18:16 -08:00
Gabe Black
710b43dfbd X86: Implement inUserMode for x86. 2009-02-25 10:18:06 -08:00
Gabe Black
1cedc748d4 X86: Add a trace flag for tracing faults. 2009-02-25 10:17:59 -08:00
Gabe Black
eec3f49a57 X86: Implement the sysret instruction in long mode. 2009-02-25 10:17:54 -08:00
Gabe Black
6325245e3e X86: Implement the longmode versions of the syscall instruction. 2009-02-25 10:17:49 -08:00
Gabe Black
dadc30b0a4 X86: Make the microcode assembler recognize r8-r15. 2009-02-25 10:17:43 -08:00
Gabe Black
fcad6e3b13 X86: Add a wrattr microop. 2009-02-25 10:17:38 -08:00
Gabe Black
e4ede69b2f X86: Add a trace flag for the page table walker. 2009-02-25 10:17:27 -08:00
Gabe Black
99aa121fca X86: Make exceptions handle stack switching. 2009-02-25 10:17:19 -08:00
Gabe Black
aa7bc1be74 X86: Implement the LTR instruction. 2009-02-25 10:17:14 -08:00
Gabe Black
08f3a126d5 X86: Fix segment limit checking. 2009-02-25 10:17:08 -08:00
Gabe Black
2f31643db5 X86: Add a check to chks to verify a task state segment descriptor. 2009-02-25 10:17:02 -08:00
Gabe Black
7b1cb74ac3 X86: Add a check to chks which raises #GP(selector) if selector is NULL or not in the GDT. 2009-02-25 10:16:54 -08:00
Gabe Black
82288e7c3e X86: Add makeAtomicResponse to the read/write functions of x86 devices. 2009-02-25 10:16:43 -08:00
Gabe Black
7462cb0842 X86: Fix the timing mode of the page table walker. 2009-02-25 10:16:34 -08:00
Gabe Black
40fdba2454 X86: Make the X86 TLB take advantage of delayed translations, and get rid of the fake TLB miss faults. 2009-02-25 10:16:21 -08:00
Gabe Black
6ed47e9464 CPU: Implement translateTiming which defers to translateAtomic, and convert the timing simple CPU to use it. 2009-02-25 10:16:15 -08:00
Gabe Black
15940d06b5 SPARC: Adjust a few instructions to not write registers in initiateAcc. 2009-02-25 10:16:04 -08:00
Gabe Black
1b336a8fe7 X86: Make the stupd microop not update registers in initiateAcc. 2009-02-25 10:15:56 -08:00
Gabe Black
5605079b1f ISA: Replace the translate functions in the TLBs with translateAtomic. 2009-02-25 10:15:44 -08:00
Gabe Black
a1aba01a02 CPU: Get rid of translate... functions from various interface classes. 2009-02-25 10:15:34 -08:00
Nathan Binkert
f3090e5b70 stats: reorganize how parameters are stored and accessed. 2009-02-23 12:22:19 -08:00
Nathan Binkert
aaf98aaa32 stats: move the limits stuff into the types.hh file 2009-02-23 12:22:18 -08:00
Nathan Binkert
80d5f34da6 stats: get rid of the convoluted 'database' code. 
Just use the stuff directly and things ought to be more clear
 2009-02-23 12:22:17 -08:00
Nathan Binkert
fb74987c52 stats: Try to make the names of things more intuitive. 
Basically, this means renaming several things called data to info, which
is information about the statistics.  Things that are named data now are
actual data stored for the statistic.
 2009-02-23 12:22:15 -08:00
Nathan Binkert
bcb7e70178 stats: clean up the statistics unittest 2009-02-23 12:04:52 -08:00
Nathan Binkert
d940a2b741 stats: fix text printout for distributions 2009-02-23 12:04:50 -08:00
Nathan Binkert
f69ea20fc6 stats: cleanup static stats to make startup work. 
This is mainly to allow the unit test to run without requiring the standard
M5 stats from being initialized (e.g. sim_seconds, sim_ticks, host_seconds)
 2009-02-23 12:03:06 -08:00
Nathan Binkert
3fa9812e1d debug: Move debug_break into src/base 2009-02-23 11:48:40 -08:00
Gabe Black
e8c1c3e72e X86: Pass whether an access was a read/write/fetch so faults can behave accordingly. 2009-02-23 00:20:34 -08:00
Korey Sewell
6c5afe6346 Remove unnecessary building of FreeList/RenameMap in InOrder. Clean-up comments and O3 extensions InOrder Thread Context 2009-02-20 11:02:48 -05:00
Nathan Binkert
c41c9cf3a6 events: Make trace events happen at the right priority. 
Also, while we're at it, remember that priorities are in the Event class
and add a disable method to disable tracing.
 2009-02-18 10:00:15 -08:00
Steve Reinhardt
6cfff91d43 Make etherdump timestamps zero-based. 
We previously used the actual wall time for the base timestamps,
making etherdumps non-deterministic.  This fixes that problem and
gets rid of the "malformed packet" at the front that we needed to
provide the right base timestamp to wireshark/tcpdump.
 2009-02-17 19:24:46 -08:00
Lisa Hsu
5d029ff11e sycalls: implement mremap() and add DATA flag for getrlimit(). mremap has been tested on Alpha, compiles for the rest but not tested. I don't see why it wouldn't work though. 2009-02-16 17:47:39 -05:00
Steve Reinhardt
89a7fb0393 Fixes to get prefetching working again. 
Apparently we broke it with the cache rewrite and never noticed.
Thanks to Bao Yungang <baoyungang@gmail.com> for a significant part
of these changes (and for inspiring me to work on the rest).
Some other overdue cleanup on the prefetch code too.
 2009-02-16 08:56:40 -08:00
Gabe Black
6923282fb5 X86: Make the loader recognize 32 bit x86 processes. 2009-02-15 23:43:39 -08:00
Nathan Binkert
e0f425bb94 traceflags: fix --trace-help 2009-02-15 20:39:12 -08:00
Nathan Binkert
f255957b90 style 2009-02-10 22:19:27 -08:00
Korey Sewell
cf4a00ca41 Configs: Add support for the InOrder CPU model 2009-02-10 15:49:29 -08:00
Korey Sewell
973d8b8b13 InOrder: Import new inorder CPU model from MIPS. 
This model currently only works in MIPS_SE mode, so it will take some effort
to clean it up and make it generally useful. Hopefully people are willing to
help make that happen!
 2009-02-10 15:49:29 -08:00
Korey Sewell
36d9065f5f syscall: Expose ioctl for MIPS 2009-02-10 15:49:29 -08:00
Korey Sewell
34a5cd8870 ExeTrace: Allow subclasses of the tracer to define their own prefix to dump 2009-02-10 15:49:29 -08:00
Korey Sewell
2d0a66cbc1 CPU: Prepare CPU models for the new in-order CPU model. 
Some new functions and forward declarations are necessary to make things work
 2009-02-10 15:49:29 -08:00
Nathan Binkert
20c5ec6e1c copyright: This file need not have had the more restrictive copyright. 2009-02-09 20:10:15 -08:00
Nathan Binkert
dd6ea8797f scons: Require SCons version 0.98.1 
This allows me to clean things up so we are up to date with respect to
deprecated features.  There are many features scheduled for permanent failure
in scons 2.0 and 0.98.1 provides the most compatability for that.  It
also paves the way for some nice new features that I will add soon
 2009-02-09 20:10:14 -08:00
Nathan Binkert
9e268ae63f scons: Don't build the intermediate static library unless explicitly requested. 
This means that similar to libm5_fast.so, you need to explicitly build
build/ALPHA_SE/libm5_fast.a if you want it.
 2009-02-09 20:10:12 -08:00
Nathan Binkert
e1798d063e Quell g++ 4.3 warning about operator ambiguity 2009-02-06 20:55:50 -08:00
Nathan Binkert
64eb0dc9cd some new files are missing copyright notices 2009-02-04 16:26:15 -08:00
Gabe Black
73f579a804 X86: Add some missing default arguments. 2009-02-01 22:40:51 -08:00
Gabe Black
5a4eed5d34 X86: All x86 fault classes now attempt to do something useful. 2009-02-01 17:09:08 -08:00
Gabe Black
923a14dde7 X86: Make the fault classes handle error codes better. 2009-02-01 17:08:32 -08:00
Gabe Black
2f8cec849d X86: Make the long mode interrupt/exception microcode handle an error code. 2009-02-01 17:07:43 -08:00
Gabe Black
9b4d1e0f9a X86: Distinguish between hardware and software interrupts/exceptions 2009-02-01 17:07:18 -08:00
Gabe Black
041402a949 X86: Fix the upper bound on some ranges that were setting up the micro code assembler. 2009-02-01 17:06:25 -08:00
Gabe Black
6b53b8387e X86: Make the chks microop check for the right int descriptor type. 2009-02-01 17:05:37 -08:00
Gabe Black
c0cd58812e X86: Touch up the interrupt entering microcode. 2009-02-01 17:04:21 -08:00
Gabe Black
03a00735c2 X86: Keep track of the vector for all exceptions/faults. 2009-02-01 17:03:11 -08:00
Gabe Black
7b58511470 CPU: Don't always reset the micro pc on faults. Let the faults handle it. 2009-02-01 00:30:54 -08:00
Gabe Black
6b60a29706 X86: Fix the time keeping of the Local APIC timer. 2009-02-01 00:30:11 -08:00
Gabe Black
ca6e0d75c8 X86: Fix the microcode for the LODS instruction. 2009-02-01 00:28:28 -08:00
Gabe Black
57be1dfe48 X86: Implement pciToDma. 2009-02-01 00:27:15 -08:00
Gabe Black
70cd5bfce5 X86: Configure the first PCI interrupt. 2009-02-01 00:26:10 -08:00
Gabe Black
f1b43b39a7 X86: Hook up the IDE controller interrupt line. 2009-02-01 00:25:15 -08:00
Gabe Black
d432bd13b2 X86: Fix some incorrect register widths. 2009-02-01 00:18:13 -08:00
Gabe Black
f3b8371dfc X86: Add extended Intel MP entries correctly. 2009-02-01 00:15:38 -08:00
Gabe Black
06cdbe5ea7 X86: Compute PCI config addresses correctly. 2009-02-01 00:11:49 -08:00
Gabe Black
483c3e96b7 X86: Calculate flags based on the actual result. 2009-02-01 00:08:16 -08:00
Gabe Black
7720968949 X86: Make sure the predecoder is cleared out for interrupts. 2009-02-01 00:04:34 -08:00
Gabe Black
3ecc38cb8b Devices: Add support for legacy fixed IO locations in BARs. 2009-02-01 00:02:21 -08:00
Gabe Black
bb7ad80bbe X86: Plug in an IDE controller. 2009-02-01 00:00:03 -08:00
Gabe Black
c2c5740b98 X86: Refactor and clean up the keyboard controller. 2009-01-31 23:59:25 -08:00
Gabe Black
7cf276bed3 X86: Add a keyboard controller device. 2009-01-31 23:59:01 -08:00
Gabe Black
0287f19ede X86: Set up the console interrupt and add some DPRINTFs. 2009-01-31 23:56:46 -08:00
Gabe Black
e1c412cec6 X86: Configure the IO APIC more. 2009-01-31 23:44:05 -08:00
Gabe Black
6a3f255a84 X86: Rework interrupt pins to allow one to many connections. 2009-01-31 23:33:54 -08:00
Gabe Black
64b663c607 X86: Initialize the value behind port 61 so unused bits are consistent. 2009-01-31 23:26:43 -08:00
Gabe Black
953e4bba59 X86: Set/correct some default values for x86 parameters. 2009-02-01 16:59:34 -08:00
Ali Saidi
be5d350afc SCons: Fix how we get Mercurial revision information since internals keep changing. 2009-01-30 20:04:57 -05:00
Ali Saidi
e7293dd24e Errors: Use the correct panic/warn/fatal/info message in some places. 2009-01-30 20:04:17 -05:00
Ali Saidi
f4291aac25 Errors: Print a URL with a hash of the format string to find more information about an error. 2009-01-30 20:04:15 -05:00
Ali Saidi
35a85a4e86 Config: Cause a fatal() when a parameter without a default value isn't set(FS #315). 2009-01-30 19:08:13 -05:00
Nathan Binkert
0b228fc1ab Fix typo 2009-01-29 22:27:11 -08:00
Gabe Black
56e182a6a9 X86: Add a dummy minimal DMA controller that doesn't do anything. 2009-01-25 20:35:00 -08:00