1. Make sure connectMemPorts() only gets called when the CPU's peer gets changed. This is done by making setPeer() virtual, and overriding it in the CPU's ports. When it gets called on a CPU's port (dcache specifically), it calls the normal setPeer() function, and also connectMemPorts().
2. Consolidate redundant code that handles switching in a CPU.
src/cpu/base.cc:
Move common code of switching over peers to base CPU.
src/cpu/base.hh:
Move common code of switching over peers to BaseCPU.
src/cpu/o3/cpu.cc:
Add in function that updates thread context's ports.
Also use updated function to takeOverFrom() in BaseCPU. This gets rid of some repeated code.
src/cpu/o3/cpu.hh:
Include function to update thread context's memory ports.
src/cpu/o3/lsq.hh:
Add function to dcache port that will update the memory ports upon getting a new peer.
Also include a function that will tell the CPU to update those memory ports.
src/cpu/o3/lsq_impl.hh:
Add function that will update the memory ports upon getting a new peer.
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Add function that will update thread context's memory ports upon getting a new peer.
Also use the new BaseCPU's take over from function.
src/cpu/simple/atomic.hh:
Add in function (and dcache port) that will allow the dcache to update memory ports when it gets assigned a new peer.
src/cpu/simple/timing.hh:
Add function that will update thread context's memory ports upon getting a new peer.
src/mem/port.hh:
Make setPeer virtual so that other classes can override it.
--HG--
extra : convert_revision : 2050f1241dd2e83875d281cfc5ad5c6c8705fdaf
into zeep.pool:/z/saidi/work/m5.newmem
src/cpu/simple/atomic.cc:
merge steve's changes in.
--HG--
extra : convert_revision : a17eda37cd63c9380af6fe68b0aef4b1e1974231
Add support for a twin 64 bit int load
Add Memory barrier and write barrier flags as appropriate
Make atomic memory ops atomic
src/arch/alpha/isa/mem.isa:
src/arch/alpha/locked_mem.hh:
src/cpu/base_dyn_inst.hh:
src/mem/cache/cache_blk.hh:
src/mem/cache/cache_impl.hh:
rename store conditional stuff as extra data so it can be used for conditional swaps as well
src/arch/alpha/types.hh:
src/arch/mips/types.hh:
src/arch/sparc/types.hh:
add a largest read data type for statically allocating read buffers in atomic simple cpu
src/arch/isa_parser.py:
Add support for a twin 64 bit int load
src/arch/sparc/isa/decoder.isa:
Make atomic memory ops atomic
Add Memory barrier and write barrier flags as appropriate
src/arch/sparc/isa/formats/mem/basicmem.isa:
add post access code block and define a twinload format for twin loads
src/arch/sparc/isa/formats/mem/blockmem.isa:
remove old microcoded twin load coad
src/arch/sparc/isa/formats/mem/mem.isa:
swap.isa replaces the code in loadstore.isa
src/arch/sparc/isa/formats/mem/util.isa:
add a post access code block
src/arch/sparc/isa/includes.isa:
need bigint.hh for Twin64_t
src/arch/sparc/isa/operands.isa:
add a twin 64 int type
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
add support for twinloads
add support for swap and conditional swap instructions
rename store conditional stuff as extra data so it can be used for conditional swaps as well
src/mem/packet.cc:
src/mem/packet.hh:
Add support for atomic swap memory commands
src/mem/packet_access.hh:
Add endian conversion function for Twin64_t type
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/request.hh:
Add support for atomic swap memory commands
Rename sc code to extradata
--HG--
extra : convert_revision : 69d908512fb34a4e28b29a6e58b807fb1a6b1656
function into Alpha ISA description. write now just generically
returns a result value if the res pointer is non-null (which means
we can only provide a res pointer if we expect a valid result
value).
--HG--
extra : convert_revision : fb1c315515787f5fbbf7d1af7e428bdbfe8148b8
Created MemCmd class to wrap enum and provide handy methods to
check attributes, convert to string/int, etc.
--HG--
extra : convert_revision : 57f147ad893443e3a2040c6d5b4cdb1a8033930b
into zower.eecs.umich.edu:/eecshome/m5/newmem
src/arch/sparc/isa/formats/mem/util.isa:
src/arch/sparc/isa_traits.hh:
src/arch/sparc/system.cc:
Hand Merge
--HG--
extra : convert_revision : d5e0c97caebb616493e2f642e915969d7028109c
pretty close to compiling w/ suns compiler
briefly:
add dummy return after panic()/fatal()
split out flags by compiler vendor
include cstring and cmath where appropriate
use std namespace for string ops
SConstruct:
Add code to detect compiler and choose cflags based on detected compiler
Fix zlib check to work with suncc
src/SConscript:
split out flags by compiler vendor
src/arch/sparc/isa/decoder.isa:
use correct namespace for sqrt
src/arch/sparc/isa/formats/basic.isa:
add dummy return around panic
src/arch/sparc/isa/formats/integerop.isa:
use correct namespace for stringops
src/arch/sparc/isa/includes.isa:
include cstring and cmath where appropriate
src/arch/sparc/isa_traits.hh:
remove dangling comma
src/arch/sparc/system.cc:
dummy return to make sun cc front end happy
src/arch/sparc/tlb.cc:
src/base/compression/lzss_compression.cc:
use std namespace for string ops
src/arch/sparc/utility.hh:
no reason to say something is unsigned unsigned int
src/base/compression/null_compression.hh:
dummy returns to for suncc front end
src/base/cprintf.hh:
use standard variadic argument syntax instead of gnuc specefic renaming
src/base/hashmap.hh:
don't need to define hash for suncc
src/base/hostinfo.cc:
need stdio.h for sprintf
src/base/loader/object_file.cc:
munmap is in std namespace not null
src/base/misc.hh:
use M5 generic noreturn macros
use standard variadic macro __VA_ARGS__
src/base/pollevent.cc:
we need file.h for file flags
src/base/random.cc:
mess with include files to make suncc happy
src/base/remote_gdb.cc:
malloc memory for function instead of having a non-constant in an array size
src/base/statistics.hh:
use std namespace for floor
src/base/stats/text.cc:
include math.h for rint (cmath won't work)
src/base/time.cc:
use suncc version of ctime_r
src/base/time.hh:
change macro to work with both gcc and suncc
src/base/timebuf.hh:
include cstring from memset and use std::
src/base/trace.hh:
change variadic macros to be normal format
src/cpu/SConscript:
add dummy returns where appropriate
src/cpu/activity.cc:
include cstring for memset
src/cpu/exetrace.hh:
include cstring fro memcpy
src/cpu/simple/base.hh:
add dummy return for panic
src/dev/baddev.cc:
src/dev/pciconfigall.cc:
src/dev/platform.cc:
src/dev/sparc/t1000.cc:
add dummy return where appropriate
src/dev/ide_atareg.h:
make define work for both gnuc and suncc
src/dev/io_device.hh:
add dummy returns where approirate
src/dev/pcidev.hh:
src/mem/cache/cache_impl.hh:
src/mem/cache/miss/blocking_buffer.cc:
src/mem/cache/tags/lru.hh:
src/mem/cache/tags/split.hh:
src/mem/cache/tags/split_lifo.hh:
src/mem/cache/tags/split_lru.hh:
src/mem/dram.cc:
src/mem/packet.cc:
src/mem/port.cc:
include cstring for string ops
src/dev/sparc/mm_disk.cc:
add dummy return where appropriate
include cstring for string ops
src/mem/cache/miss/blocking_buffer.hh:
src/mem/port.hh:
Add dummy return where appropriate
src/mem/cache/tags/iic.cc:
cast hastSets to double for log() call
src/mem/physical.cc:
cast pmemAddr to char* for munmap
src/sim/byteswap.hh:
make define work for suncc and gnuc
--HG--
extra : convert_revision : ef8a1f1064e43b6c39838a85c01aee4f795497bd
Only allow writing/reading of 32 bits of Y
Only allow writing/reading 32 bits of pc when pstate.am
Put any loaded data on the first half of a micro-op in uReg0 so it can't
overwrite the register we are using for address calculation
only erase a entry from the lookup table if it's valid
Put in a temporary check to make sure that lookup table and tlb array stay in sync
if we are interrupted in the middle of a mico-op, reset the micropc/nexpc
so we start on the first part of it when we come back
src/arch/sparc/isa/decoder.isa:
fix smul and sdiv to sign extend, and handle overflow/underflow corretly
Only allow writing/reading of 32 bits of Y
Only allow writing/reading 32 bits of pc when pstate.am
Put any loaded data on the first half of a micro-op in uReg0 so it can't
overwrite the register we are using for address calculation
src/arch/sparc/isa/formats/mem/blockmem.isa:
Put any loaded data on the first half of a micro-op in uReg0 so it can't
overwrite the register we are using for address calculation
src/arch/sparc/isa/includes.isa:
Use limits for 32bit underflow/overflow detection
src/arch/sparc/tlb.cc:
only erase a entry from the lookup table if it's valid
Put in a temporary check to make sure that lookup table and tlb array stay in sync
src/arch/sparc/tlb_map.hh:
add a print function to dump the tlb lookup table
src/cpu/simple/base.cc:
if we are interrupted in the middle of a mico-op, reset the micropc/nexpc
so we start on the first part of it when we come back
--HG--
extra : convert_revision : 50a23837fd888393a5c2aa35cbd1abeebb7f55d4
Increment instruction count on first micro-op instead of last
src/arch/sparc/isa/decoder.isa:
Implement a twin load for ASI_LDTX_P(0xe2)
src/arch/sparc/isa/formats/mem/blockmem.isa:
set the new flag IsFirstMicroOp when needed
src/cpu/simple/atomic.cc:
Increment instruction count on first micro-op instead of last (because if we take a fault on a micro coded instruction it should be counted twice acording to legion)
src/cpu/static_inst.hh:
Add IsFirstMicroop flag to static insts
--HG--
extra : convert_revision : 02bea93d38c03bbafe4570665eb4c01c11caa2fc
src/arch/isa_parser.py:
Rearranged things so that classes with more than one execute function treat operands properly.
1. Eliminated the CodeBlock class
2. Created a SubOperandList
3. Redefined how InstObjParams is constructed
To define an InstObjParam, you can either pass in a single code literal which will be named "code", or you can pass in a dictionary of code snippets which will be substituted into the Templates. In order to get this to work, there is a new restriction that each template has only one function in it. These changes should only affect memory instructions which have regular and split execute functions.
Also changed the MiscRegs so that they use the instrunctions srcReg and destReg arrays.
src/arch/sparc/isa/formats/basic.isa:
src/arch/sparc/isa/formats/branch.isa:
src/arch/sparc/isa/formats/integerop.isa:
src/arch/sparc/isa/formats/mem/basicmem.isa:
src/arch/sparc/isa/formats/mem/blockmem.isa:
src/arch/sparc/isa/formats/mem/util.isa:
src/arch/sparc/isa/formats/nop.isa:
src/arch/sparc/isa/formats/priv.isa:
src/arch/sparc/isa/formats/trap.isa:
Rearranged to work with new InstObjParam scheme.
src/cpu/o3/sparc/dyn_inst.hh:
Added functions to access the miscregs using the indexes from instructions srcReg and destReg arrays. Also changed the names of the other accessors so that they have the suffix "Operand" if they use those arrays.
src/cpu/simple/base.hh:
Added functions to access the miscregs using the indexes from instructions srcReg and destReg arrays.
--HG--
extra : convert_revision : c91e1073138b72bcf4113a721e0ed40ec600cf2e
RangeSize as a function takes a start address, and a SIZE, and will make the range (start, start+size-1) for you.
src/cpu/memtest/memtest.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/lsq.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/simple/atomic.hh:
src/cpu/simple/timing.hh:
Fix RangeSize arguments
src/dev/alpha/tsunami_cchip.cc:
src/dev/alpha/tsunami_io.cc:
src/dev/alpha/tsunami_pchip.cc:
src/dev/baddev.cc:
pioSize indicates SIZE, not a mask
--HG--
extra : convert_revision : d385521fcfe58f8dffc8622260937e668a47a948
configs/common/FSConfig.py:
seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
Use instruction count from cpu rather than cycles because that is what legion does
we can change it back after were done with legion
src/base/bitfield.hh:
add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
change asserts of packet success to if panics wrapped with NDEBUG defines
so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
convert some tabs to spaces
src/python/m5/objects/T1000.py:
add more fake devices for each l1 bank and each memory controller
--HG--
extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
src/arch/SConscript:
add mmaped_ipr.hh to switch headers
src/arch/sparc/asi.hh:
make ASI_IMPLICT=0 so by default nothing needs to be done
src/arch/sparc/miscregfile.hh:
miscregfile no longer needs to include asi.hh
src/arch/sparc/tlb.cc:
src/arch/sparc/tlb.hh:
implement panic instructions for mmaped ipr reads
src/cpu/simple/atomic.cc:
add check for mmaped iprs and handle them if it exists
src/mem/request.hh:
allocate space in the flags for mmaped iprs. Put in in the first 8 bits so that by default its fast. Move the other flags up 8 bits
--HG--
extra : convert_revision : 31255b0494588c4d06a727fe35241121d741b115
Right now this introduces a minor memory leak as old physPorts and virtPorts are not deleted when new ones are created. A flyspray task has been created for this issue. It can not be resolved until we determine how the bus will handle giving out ID's to functional ports that may be deleted.
src/cpu/o3/cpu.cc:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Change the setup of the physPort and virtPort to instead happen every time the CPU has a context activated. This is a little high overhead, but keeps it working correctly when the CPU does not have a physical memory attached to it until it switches in (like the case of switch CPUs).
src/cpu/o3/thread_context.hh:
Change function from being called at init() to just being called whenever the memory ports need to be connected.
src/cpu/o3/thread_context_impl.hh:
Update this to not delete the port if it's the same as the virtPort.
src/cpu/thread_context.hh:
Change function from being called at init() to whenever the memory ports need to be connected.
src/cpu/thread_state.cc:
Instead of initializing the ports, simply connect them, deleting any old ports that might exist. This allows these functions to be called multiple times.
src/cpu/thread_state.hh:
Ports are no longer initialized, but rather connected at context activation time.
--HG--
extra : convert_revision : e399ce5dfbd6ad658c953a7c9c7b69b89a70219e
src/cpu/simple/timing.cc:
Various updates for deleting requests more properly.
The major change is moving the deletion of the fetch request/packet to after the instruction has executed and completed. This should fix a few bugs because Ron's memory system didn't expect a call for a functional access while a timing access was being processed.
--HG--
extra : convert_revision : c7cf114bb1ff3cdaa7b0a40ed4c5302dc9d3a522
src/arch/alpha/interrupts.hh:
No need for this now that the ThreadContext is being used to set these IPRs in interrupts.
Also split up the interrupt checking from the updating of the IPL and interrupt summary.
src/arch/alpha/tlb.cc:
Check the PC for whether or not it's in PAL mode, not the addr.
src/cpu/o3/alpha/cpu.hh:
Split up getting the interrupt from actually processing the interrupt.
src/cpu/o3/alpha/cpu_impl.hh:
Splut up the processing of interrupts.
src/cpu/o3/commit_impl.hh:
Update for ISA-oriented interrupt changes.
src/cpu/o3/fetch_impl.hh:
Fix broken if statement from PcPAL updates, and properly populate the request fields.
Also more debugging output.
src/cpu/ozone/cpu_impl.hh:
Updates for ISA-oriented interrupt stuff.
src/cpu/ozone/front_end_impl.hh:
Populate request fields properly.
src/cpu/simple/base.cc:
Update for interrupt stuff.
--HG--
extra : convert_revision : 9bac3f9ffed4948ee788699b2fa8419bc1ca647c
src/cpu/o3/cpu.cc:
Handle draining properly when CPU isn't actually being used.
src/cpu/simple/atomic.cc:
Be sure to set status properly when draining.
src/mem/bus.cc:
Fix for draining.
--HG--
extra : convert_revision : d9796e6693e974f022159029fc9743c49a970c8f
src/cpu/base.cc:
Move clock phase drift code to the base CPU so that any CPU model can use it.
src/cpu/base.hh:
Added two functions to help get the next cycle the CPU should be scheduled.
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Use the function now in BaseCPU.
--HG--
extra : convert_revision : 444494b66ffc85fc473c23f57683c5f9458ad80c
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix
configs/example/fs.py:
configs/example/se.py:
src/mem/tport.hh:
Hand merge.
--HG--
extra : convert_revision : b9df95534d43b3b311f24ae24717371d03d615bf
configs/example/fs.py:
configs/example/se.py:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.cc:
src/cpu/thread_state.hh:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
No need for mem parameter any more.
src/cpu/checker/cpu.cc:
Use new constructor for simple thread (no more MemObject parameter).
src/cpu/checker/cpu.hh:
Remove MemObject parameter.
src/cpu/memtest/memtest.hh:
Ports now take in their MemObject owner.
src/cpu/o3/alpha/cpu_builder.cc:
Remove mem parameter.
src/cpu/o3/alpha/cpu_impl.hh:
Remove memory parameter and clean up handling of TranslatingPort.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/params.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/atomic.cc:
Remove memory parameter.
--HG--
extra : convert_revision : 43cb44a33b31320d44b69679dcf646c0380d07d3
src/cpu/simple/atomic.hh:
Port now takes in the MemObject that owns it.
src/cpu/simple/timing.hh:
Port now takes in MemObject that owns it.
src/dev/io_device.cc:
src/mem/bus.hh:
Ports now take in the MemObject that owns it.
src/mem/cache/base_cache.cc:
Ports now take in the MemObject that own it.
src/mem/port.hh:
src/mem/tport.hh:
Ports now optionally take in the MemObject that owns it.
--HG--
extra : convert_revision : 890a72a871795987c2236c65937e06973412d349
src/cpu/simple/base.cc:
Make a microcoded op start at the current micropc, rather than starting at 0.
src/cpu/thread_state.cc:
Serialize the microPC and nextMicroPC
--HG--
extra : convert_revision : 5302215f17312ecef3ff4c6548acb05297ee4ff6
Still a bug in atomic uni-coherence in FS.
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Make CPU models handle coherence requests
src/mem/cache/base_cache.cc:
Properly signal coherence CSHRs
src/mem/cache/coherence/uni_coherence.cc:
Only deallocate once
--HG--
extra : convert_revision : c4533de421c371c5532ee505e3ecd451511f5c99
src/arch/sparc/isa/formats/blockmem.isa:
Several small and medium bug fixes.
src/cpu/simple/base.cc:
Fixed a few compiler errors and made sure the next micro pc is set to 1 to prevent the first microop from executing twice. Also fixed a fetching bug.
src/cpu/thread_state.cc:
Made sure the microPC and nextMicroPC are initialized properly.
--HG--
extra : convert_revision : a0fc8aa18d1ade916f17c557181a793c6108a8af
into zed.eecs.umich.edu:/z/hsul/work/m5/newmem
src/cpu/simple/timing.cc:
hand merge
--HG--
extra : convert_revision : 083bf102249ad9bc63c447dbf85d3863f935f647
src/cpu/simple/atomic.cc:
memory mode assertion change so that it only goes off if it's supposed to.
src/cpu/simple/timing.cc:
some drain changes (kevin's) and some changes to memoryMode assertions so that they don't go off when they're not supposed to.
--HG--
extra : convert_revision : 007d8610f097e08f01367b905ada49f93cf37ca3
into zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/cpu/simple/timing.hh:
tests/configs/o3-timing-mp.py:
Hand merge.
--HG--
extra : convert_revision : a58cc439eb5e8f900d175ed8b5a85b6c8723e558
src/cpu/simple/atomic.cc:
add in serialization of AtomicSimpleCPU _status. Kev says that this will break uniform serialization across CPUs since each type of CPU has its own "status" enum set. So, the repercussions are that if you serialize in this CPU, you must first unserialize in this CPU before switching to something else you want.
--HG--
extra : convert_revision : 7000f660aecea6fef712bf81853d9a7b90d625ee
If the cpu needs to update any state when it gets a functional write (LSQ??)
then that code needs to be written.
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
CPU's can recieve functional accesses, they need to determine if they need to do anything with them.
src/mem/bus.cc:
src/mem/bus.hh:
Make the fuctional path do the correct tye of snoop
--HG--
extra : convert_revision : 70d09f954b907a8aa9b8137579cd2b06e02ae2ff
and PhysicalMemory. *No* support for caches or O3CPU.
Note that properly setting cpu_id on all CPUs is now required
for correct operation.
src/arch/SConscript:
src/base/traceflags.py:
src/cpu/base.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/request.hh:
src/python/m5/objects/BaseCPU.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
Implement Alpha LL/SC support for SimpleCPU (Atomic & Timing)
and PhysicalMemory. *No* support for caches or O3CPU.
--HG--
extra : convert_revision : 6ce982d44924cc477e049b9adf359818908e72be
src/cpu/simple/timing.cc:
Record numCycles stat properly.
src/cpu/simple/timing.hh:
Extra variable to help record numCycles stat.
--HG--
extra : convert_revision : 343311902831820264878aad41dc619999726b6b
into zeep.eecs.umich.edu:/home/gblack/m5/newmem
src/cpu/ozone/cpu_impl.hh:
Hand merged
--HG--
extra : convert_revision : f8a5b0205bcb78c8f5e109f456fe7bca80a7abac
