Commit graph

53 commits

Author SHA1 Message Date
Matt Horsnell
6decd70bfb cpu: add consistent guarding to *_impl.hh files. 2013-10-17 10:20:45 -05:00
Yasuko Eckert
2c293823aa cpu: add a condition-code register class
Add a third register class for condition codes,
in parallel with the integer and FP classes.
No ISAs use the CC class at this point though.
2013-10-15 14:22:44 -04:00
Andreas Sandberg
1814a85a05 cpu: Rewrite O3 draining to avoid stopping in microcode
Previously, the O3 CPU could stop in the middle of a microcode
sequence. This patch makes sure that the pipeline stops when it has
committed a normal instruction or exited from a microcode
sequence. Additionally, it makes sure that the pipeline has no
instructions in flight when it is drained, which should make draining
more robust.

Draining is controlled in the commit stage, which checks if the next
PC after a committed instruction is in microcode. If this isn't the
case, it requests a squash of all instructions after that the
instruction that just committed and immediately signals a drain stall
to the fetch stage. The CPU then continues to execute until the
pipeline and all associated buffers are empty.
2013-01-07 13:05:46 -05:00
Andreas Hansson
287ea1a081 Param: Transition to Cycles for relevant parameters
This patch is a first step to using Cycles as a parameter type. The
main affected modules are the CPUs and the Ruby caches. There are
definitely plenty more places that are affected, but this patch serves
as a starting point to making the transition.

An important part of this patch is to actually enable parameters to be
specified as Param.Cycles which involves some changes to params.py.
2012-09-07 12:34:38 -04:00
Andreas Hansson
0cacf7e817 Clock: Add a Cycles wrapper class and use where applicable
This patch addresses the comments and feedback on the preceding patch
that reworks the clocks and now more clearly shows where cycles
(relative cycle counts) are used to express time.

Instead of bumping the existing patch I chose to make this a separate
patch, merely to try and focus the discussion around a smaller set of
changes. The two patches will be pushed together though.

This changes done as part of this patch are mostly following directly
from the introduction of the wrapper class, and change enough code to
make things compile and run again. There are definitely more places
where int/uint/Tick is still used to represent cycles, and it will
take some time to chase them all down. Similarly, a lot of parameters
should be changed from Param.Tick and Param.Unsigned to
Param.Cycles.

In addition, the use of curTick is questionable as there should not be
an absolute cycle. Potential solutions can be built on top of this
patch. There is a similar situation in the o3 CPU where
lastRunningCycle is currently counting in Cycles, and is still an
absolute time. More discussion to be had in other words.

An additional change that would be appropriate in the future is to
perform a similar wrapping of Tick and probably also introduce a
Ticks class along with suitable operators for all these classes.
2012-08-28 14:30:33 -04:00
Andreas Hansson
d53d04473e Clock: Rework clocks to avoid tick-to-cycle transformations
This patch introduces the notion of a clock update function that aims
to avoid costly divisions when turning the current tick into a
cycle. Each clocked object advances a private (hidden) cycle member
and a tick member and uses these to implement functions for getting
the tick of the next cycle, or the tick of a cycle some time in the
future.

In the different modules using the clocks, changes are made to avoid
counting in ticks only to later translate to cycles. There are a few
oddities in how the O3 and inorder CPU count idle cycles, as seen by a
few locations where a cycle is subtracted in the calculation. This is
done such that the regression does not change any stats, but should be
revisited in a future patch.

Another, much needed, change that is not done as part of this patch is
to introduce a new typedef uint64_t Cycle to be able to at least hint
at the unit of the variables counting Ticks vs Cycles. This will be
done as a follow-up patch.

As an additional follow up, the thread context still uses ticks for
the book keeping of last activate and last suspend and this should
probably also be changed into cycles as well.
2012-08-28 14:30:31 -04:00
Ali Saidi
6df196b71e O3: Clean up the O3 structures and try to pack them a bit better.
DynInst is extremely large the hope is that this re-organization will put the
most used members close to each other.
2012-06-05 01:23:09 -04:00
Koan-Sin Tan
7d4f187700 clang: Enable compiling gem5 using clang 2.9 and 3.0
This patch adds the necessary flags to the SConstruct and SConscript
files for compiling using clang 2.9 and later (on Ubuntu et al and OSX
XCode 4.2), and also cleans up a bunch of compiler warnings found by
clang. Most of the warnings are related to hidden virtual functions,
comparisons with unsigneds >= 0, and if-statements with empty
bodies. A number of mismatches between struct and class are also
fixed. clang 2.8 is not working as it has problems with class names
that occur in multiple namespaces (e.g. Statistics in
kernel_stats.hh).

clang has a bug (http://llvm.org/bugs/show_bug.cgi?id=7247) which
causes confusion between the container std::set and the function
Packet::set, and this is currently addressed by not including the
entire namespace std, but rather selecting e.g. "using std::vector" in
the appropriate places.
2012-01-31 12:05:52 -05:00
Steve Reinhardt
84f0a1bd91 event: minor cleanup
Initialize flags via the Event constructor instead of calling
setFlags() in the body of the derived class's constructor.  I
forget exactly why, but this made life easier when implementing
multi-queue support.

Also rename Event::getFlags() to isFlagSet() to better match
common usage, and get rid of some unused Event methods.
2011-09-22 18:59:55 -07:00
Gabe Black
a9b7931156 O3: Let squashed and deferred instructions issue.
Let squahsed and deferred instructions issue so they don't accumulate and clog
up the CPU.
2011-08-07 15:41:07 -07:00
Giacomo Gabrielli
69ef57fd0f O3: Create a pipeline activity viewer for the O3 CPU model.
Implemented a pipeline activity viewer as a python script (util/o3-pipeview.py)
and modified O3 code base to support an extra trace flag (O3PipeView) for
generating traces to be used as inputs by the tool.
2011-07-15 11:53:35 -05:00
Ali Saidi
89e7bcca82 O3: Remove assertion for case that is actually handled in code.
If an nonspeculative instruction has a fault it might not be in the
nonSpecInsts map.
2011-05-04 20:38:27 -05:00
Nathan Binkert
63371c8664 stats: rename stats so they can be used as python expressions 2011-04-19 18:45:21 -07:00
Nathan Binkert
eddac53ff6 trace: reimplement the DTRACE function so it doesn't use a vector
At the same time, rename the trace flags to debug flags since they
have broader usage than simply tracing.  This means that
--trace-flags is now --debug-flags and --trace-help is now --debug-help
2011-04-15 10:44:32 -07:00
Ali Saidi
3de8e0a0d4 O3: If there is an outstanding table walk don't let the inst queue sleep.
If there is an outstanding table walk and no other activity in the CPU
it can go to sleep and never wake up. This change makes the instruction
queue always active if the CPU is waiting for a store to translate.

If Gabe changes the way this code works then the below should be removed
as indicated by the todo.
2011-02-23 15:10:49 -06:00
Ali Saidi
7c763b34c9 O3: Fix GCC 4.2.4 complaint 2011-02-13 16:51:15 -05:00
Giacomo Gabrielli
e2507407b1 O3: Enhance data address translation by supporting hardware page table walkers.
Some ISAs (like ARM) relies on hardware page table walkers.  For those ISAs,
when a TLB miss occurs, initiateTranslation() can return with NoFault but with
the translation unfinished.

Instructions experiencing a delayed translation due to a hardware page table
walk are deferred until the translation completes and kept into the IQ.  In
order to keep track of them, the IQ has been augmented with a queue of the
outstanding delayed memory instructions.  When their translation completes,
instructions are re-executed (only their initiateAccess() was already
executed; their DTB translation is now skipped).  The IEW stage has been
modified to support such a 2-pass execution.
2011-02-11 18:29:35 -06:00
Joel Hestness
b4c10bd680 mcpat: Adds McPAT performance counters
Updated patches from Rick Strong's set that modify performance counters for
McPAT
2011-02-06 22:14:17 -08:00
Steve Reinhardt
6f1187943c Replace curTick global variable with accessor functions.
This step makes it easy to replace the accessor functions
(which still access a global variable) with ones that access
per-thread curTick values.
2011-01-07 21:50:29 -08:00
Gabe Black
6f4bd2c1da ISA,CPU,etc: Create an ISA defined PC type that abstracts out ISA behaviors.
This change is a low level and pervasive reorganization of how PCs are managed
in M5. Back when Alpha was the only ISA, there were only 2 PCs to worry about,
the PC and the NPC, and the lsb of the PC signaled whether or not you were in
PAL mode. As other ISAs were added, we had to add an NNPC, micro PC and next
micropc, x86 and ARM introduced variable length instruction sets, and ARM
started to keep track of mode bits in the PC. Each CPU model handled PCs in
its own custom way that needed to be updated individually to handle the new
dimensions of variability, or, in the case of ARMs mode-bit-in-the-pc hack,
the complexity could be hidden in the ISA at the ISA implementation's expense.
Areas like the branch predictor hadn't been updated to handle branch delay
slots or micropcs, and it turns out that had introduced a significant (10s of
percent) performance bug in SPARC and to a lesser extend MIPS. Rather than
perpetuate the problem by reworking O3 again to handle the PC features needed
by x86, this change was introduced to rework PC handling in a more modular,
transparent, and hopefully efficient way.


PC type:

Rather than having the superset of all possible elements of PC state declared
in each of the CPU models, each ISA defines its own PCState type which has
exactly the elements it needs. A cross product of canned PCState classes are
defined in the new "generic" ISA directory for ISAs with/without delay slots
and microcode. These are either typedef-ed or subclassed by each ISA. To read
or write this structure through a *Context, you use the new pcState() accessor
which reads or writes depending on whether it has an argument. If you just
want the address of the current or next instruction or the current micro PC,
you can get those through read-only accessors on either the PCState type or
the *Contexts. These are instAddr(), nextInstAddr(), and microPC(). Note the
move away from readPC. That name is ambiguous since it's not clear whether or
not it should be the actual address to fetch from, or if it should have extra
bits in it like the PAL mode bit. Each class is free to define its own
functions to get at whatever values it needs however it needs to to be used in
ISA specific code. Eventually Alpha's PAL mode bit could be moved out of the
PC and into a separate field like ARM.

These types can be reset to a particular pc (where npc = pc +
sizeof(MachInst), nnpc = npc + sizeof(MachInst), upc = 0, nupc = 1 as
appropriate), printed, serialized, and compared. There is a branching()
function which encapsulates code in the CPU models that checked if an
instruction branched or not. Exactly what that means in the context of branch
delay slots which can skip an instruction when not taken is ambiguous, and
ideally this function and its uses can be eliminated. PCStates also generally
know how to advance themselves in various ways depending on if they point at
an instruction, a microop, or the last microop of a macroop. More on that
later.

Ideally, accessing all the PCs at once when setting them will improve
performance of M5 even though more data needs to be moved around. This is
because often all the PCs need to be manipulated together, and by getting them
all at once you avoid multiple function calls. Also, the PCs of a particular
thread will have spatial locality in the cache. Previously they were grouped
by element in arrays which spread out accesses.


Advancing the PC:

The PCs were previously managed entirely by the CPU which had to know about PC
semantics, try to figure out which dimension to increment the PC in, what to
set NPC/NNPC, etc. These decisions are best left to the ISA in conjunction
with the PC type itself. Because most of the information about how to
increment the PC (mainly what type of instruction it refers to) is contained
in the instruction object, a new advancePC virtual function was added to the
StaticInst class. Subclasses provide an implementation that moves around the
right element of the PC with a minimal amount of decision making. In ISAs like
Alpha, the instructions always simply assign NPC to PC without having to worry
about micropcs, nnpcs, etc. The added cost of a virtual function call should
be outweighed by not having to figure out as much about what to do with the
PCs and mucking around with the extra elements.

One drawback of making the StaticInsts advance the PC is that you have to
actually have one to advance the PC. This would, superficially, seem to
require decoding an instruction before fetch could advance. This is, as far as
I can tell, realistic. fetch would advance through memory addresses, not PCs,
perhaps predicting new memory addresses using existing ones. More
sophisticated decisions about control flow would be made later on, after the
instruction was decoded, and handed back to fetch. If branching needs to
happen, some amount of decoding needs to happen to see that it's a branch,
what the target is, etc. This could get a little more complicated if that gets
done by the predecoder, but I'm choosing to ignore that for now.


Variable length instructions:

To handle variable length instructions in x86 and ARM, the predecoder now
takes in the current PC by reference to the getExtMachInst function. It can
modify the PC however it needs to (by setting NPC to be the PC + instruction
length, for instance). This could be improved since the CPU doesn't know if
the PC was modified and always has to write it back.


ISA parser:

To support the new API, all PC related operand types were removed from the
parser and replaced with a PCState type. There are two warts on this
implementation. First, as with all the other operand types, the PCState still
has to have a valid operand type even though it doesn't use it. Second, using
syntax like PCS.npc(target) doesn't work for two reasons, this looks like the
syntax for operand type overriding, and the parser can't figure out if you're
reading or writing. Instructions that use the PCS operand (which I've
consistently called it) need to first read it into a local variable,
manipulate it, and then write it back out.


Return address stack:

The return address stack needed a little extra help because, in the presence
of branch delay slots, it has to merge together elements of the return PC and
the call PC. To handle that, a buildRetPC utility function was added. There
are basically only two versions in all the ISAs, but it didn't seem short
enough to put into the generic ISA directory. Also, the branch predictor code
in O3 and InOrder were adjusted so that they always store the PC of the actual
call instruction in the RAS, not the next PC. If the call instruction is a
microop, the next PC refers to the next microop in the same macroop which is
probably not desirable. The buildRetPC function advances the PC intelligently
to the next macroop (in an ISA specific way) so that that case works.


Change in stats:

There were no change in stats except in MIPS and SPARC in the O3 model. MIPS
runs in about 9% fewer ticks. SPARC runs with 30%-50% fewer ticks, which could
likely be improved further by setting call/return instruction flags and taking
advantage of the RAS.


TODO:

Add != operators to the PCState classes, defined trivially to be !(a==b).
Smooth out places where PCs are split apart, passed around, and put back
together later. I think this might happen in SPARC's fault code. Add ISA
specific constructors that allow setting PC elements without calling a bunch
of accessors. Try to eliminate the need for the branching() function. Factor
out Alpha's PAL mode pc bit into a separate flag field, and eliminate places
where it's blindly masked out or tested in the PC.
2010-10-31 00:07:20 -07:00
Min Kyu Jeong
92ae620be8 ARM: mark msr/mrs instructions as SerializeBefore/After
Since miscellaneous registers bypass wakeup logic, force serialization
to resolve data dependencies through them
* * *
ARM: adding non-speculative/serialize flags for instructions change CPSR
2010-08-23 11:18:41 -05:00
Nathan Binkert
47877cf2db types: add a type for thread IDs and try to use it everywhere 2009-05-26 09:23:13 -07:00
Nathan Binkert
e06321091d eventq: convert all usage of events to use the new API.
For now, there is still a single global event queue, but this is
necessary for making the steps towards a parallelized m5.
2008-10-09 04:58:24 -07:00
Nathan Binkert
ee62a0fec8 params: Convert the CPU objects to use the auto generated param structs.
A whole bunch of stuff has been converted to use the new params stuff, but
the CPU wasn't one of them.  While we're at it, make some things a bit
more stylish. Most of the work was done by Gabe, I just cleaned stuff up
a bit more at the end.
2008-08-11 12:22:16 -07:00
Stephen Hines
6cc1573923 Make the Event::description() a const function
--HG--
extra : convert_revision : c7768d54d3f78685e93920069f5485083ca989c0
2008-02-06 16:32:40 -05:00
Ke Meng
0b6876a0c0 The reason is that the event is supposed to put the instructions ready to execute for next cycle. And the FUCompletion event has a lower priority than CPU tick event. It is called after the iew->tick() for current cycle has already been executed and the issueToExecuteQueue has already advanced this time. And assume the issueToExecuteLatency is 1, to catch up, the increasement should be made at access(-1) instead of access(0). Otherwise I found it could increase the actual op_latency of the instructions to execute by 1 cycle and potentially put the simulated CPU into a permanent idle state.
Signed-off by: Ali Saidi <saidi@eecs.umich.edu>

--HG--
extra : convert_revision : dafc16814383e8e8f8320845edf6ab2bcfed1e1d
2008-01-14 11:47:32 -05:00
Ali Saidi
d325f49b70 Rename cycles() function to ticks()
--HG--
extra : convert_revision : 790eddb793d4f5ba35813d001037bd8601bd76a5
2007-09-28 13:21:52 -04:00
Nathan Binkert
f0fef8f850 Merge python and x86 changes with cache branch
--HG--
extra : convert_revision : e06a950964286604274fba81dcca362d75847233
2007-07-26 23:15:49 -07:00
Nathan Binkert
abc76f20cb Major changes to how SimObjects are created and initialized. Almost all
creation and initialization now happens in python.  Parameter objects
are generated and initialized by python.  The .ini file is now solely for
debugging purposes and is not used in construction of the objects in any
way.

--HG--
extra : convert_revision : 7e722873e417cb3d696f2e34c35ff488b7bff4ed
2007-07-23 21:51:38 -07:00
Steve Reinhardt
ee54ad318a Event descriptions should not end in "event"
(they function as adjectives not nouns)

--HG--
extra : convert_revision : 6506474ff3356ae8c80ed276c3608d8a4680bfdb
2007-06-30 17:45:58 -07:00
Gabe Black
c7f1cf1d58 Remove most of the special handling for delay slots since they have to be squashed anyway on a mispredict. This is because the NNPC value they saw when executing was incorrect.
--HG--
extra : convert_revision : b42c4eb28b4fbba66c65cbd0a5033bf886c1532d
2007-04-13 13:59:31 +00:00
Kevin Lim
6ff6621f20 Pass ISA-specific O3 CPU as a constructor parameter instead of using setCPU functions.
src/cpu/o3/alpha/cpu_impl.hh:
    Pass ISA-specific O3 CPU to FullO3CPU as a constructor parameter instead of using setCPU functions.

--HG--
extra : convert_revision : 74f4b1f5fb6f95a56081f367cce7ff44acb5688a
2007-04-04 15:38:59 -04:00
Kevin Lim
ec09e5ad6f Remove/comment out DPRINTFs that were causing a segfault.
The removed ones were unnecessary.  The commented out ones could be useful in the future, should this problem get fixed.  See flyspray task #243.

src/cpu/o3/commit_impl.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/o3/lsq_unit_impl.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/rob_impl.hh:
    Remove/comment out DPRINTFs that were causing a segfault.

--HG--
extra : convert_revision : b5aeda1c6300dfde5e0a3e9b8c4c5f6fa00b9862
2007-04-02 13:55:45 -04:00
Kevin Lim
047f77102b Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/tmp/clean2

src/cpu/base_dyn_inst.hh:
    Hand merge.  Line is no longer needed because it's handled in the ISA.

--HG--
extra : convert_revision : 0be4067aa38759a5631c6940f0167d48fde2b680
2007-03-23 13:20:19 -04:00
Kevin Lim
e21878c3f2 Handle status bits a little better, as well as non-speculative instructions.
src/cpu/o3/iew_impl.hh:
    Allow for slightly more flexible handling of non-speculative instructions.  They can be other classes now, such as loads or stores.

    Also be sure to clear the state associated with squashes that are not used.  i.e. if a squash due to a memory ordering violation happens on the same cycle as an older branch squashing, clear the state associated with the memory ordering violation.

    Lastly don't consider uncached loads to officially be "at commit" until IEW receives the signal back from commit about the load.
src/cpu/o3/inst_queue_impl.hh:
    Don't consider non-speculative instructions to be "at commit" until the IQ has received a signal from commit about the instruction.  This prevents non-speculative instructions from being issued too early.
src/cpu/o3/mem_dep_unit_impl.hh:
    Clear instruction's ability to issue if it's replayed.

--HG--
extra : convert_revision : d69dae878a30821222885485f4dee87170d56eb3
2007-03-23 11:40:53 -04:00
Nathan Binkert
d55b25cde6 Move all of the parameters of the Root SimObject so they are
directly configured by python.  Move stuff from root.(cc|hh) to
core.(cc|hh) since it really belogs there now.
In the process, simplify how ticks are used in the python code.

--HG--
extra : convert_revision : cf82ee1ea20f9343924f30bacc2a38d4edee8df3
2007-03-06 11:13:43 -08:00
Nathan Binkert
9aecfb3e3b don't use (*activeThreads).begin(), use activeThreads->blah().
Also don't call (*activeThreads).end() over and over.  Just
call activeThreads->end() once and save the result.
Make sure we always check that there are elements in the list
before we grab the first one.

--HG--
extra : convert_revision : d769d8ed52da99532d57a9bbc93e92ddf22b7e58
2006-12-20 22:20:11 -08:00
Kevin Lim
4ed184eade Merge ktlim@zamp:./local/clean/o3-merge/m5
into  zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem

configs/boot/micro_memlat.rcS:
configs/boot/micro_tlblat.rcS:
src/arch/alpha/ev5.cc:
src/arch/alpha/isa/decoder.isa:
src/arch/alpha/isa_traits.hh:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.hh:
src/cpu/checker/cpu_impl.hh:
src/cpu/o3/alpha/cpu_impl.hh:
src/cpu/o3/alpha/params.hh:
src/cpu/o3/checker_builder.cc:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/checker_builder.cc:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/base.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.hh:
src/dev/ide_disk.cc:
src/python/m5/objects/O3CPU.py:
src/python/m5/objects/Root.py:
src/python/m5/objects/System.py:
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
src/sim/system.hh:
util/m5/m5.c:
    Hand merge.

--HG--
rename : arch/alpha/ev5.cc => src/arch/alpha/ev5.cc
rename : arch/alpha/freebsd/system.cc => src/arch/alpha/freebsd/system.cc
rename : arch/alpha/isa/decoder.isa => src/arch/alpha/isa/decoder.isa
rename : arch/alpha/isa/mem.isa => src/arch/alpha/isa/mem.isa
rename : arch/alpha/isa_traits.hh => src/arch/alpha/isa_traits.hh
rename : arch/alpha/linux/system.cc => src/arch/alpha/linux/system.cc
rename : arch/alpha/system.cc => src/arch/alpha/system.cc
rename : arch/alpha/tru64/system.cc => src/arch/alpha/tru64/system.cc
rename : cpu/base.cc => src/cpu/base.cc
rename : cpu/base.hh => src/cpu/base.hh
rename : cpu/base_dyn_inst.hh => src/cpu/base_dyn_inst.hh
rename : cpu/checker/cpu.hh => src/cpu/checker/cpu.hh
rename : cpu/checker/cpu.cc => src/cpu/checker/cpu_impl.hh
rename : cpu/o3/alpha_cpu_builder.cc => src/cpu/o3/alpha/cpu_builder.cc
rename : cpu/checker/o3_cpu_builder.cc => src/cpu/o3/checker_builder.cc
rename : cpu/o3/commit_impl.hh => src/cpu/o3/commit_impl.hh
rename : cpu/o3/cpu.cc => src/cpu/o3/cpu.cc
rename : cpu/o3/fetch_impl.hh => src/cpu/o3/fetch_impl.hh
rename : cpu/o3/iew.hh => src/cpu/o3/iew.hh
rename : cpu/o3/iew_impl.hh => src/cpu/o3/iew_impl.hh
rename : cpu/o3/inst_queue.hh => src/cpu/o3/inst_queue.hh
rename : cpu/o3/inst_queue_impl.hh => src/cpu/o3/inst_queue_impl.hh
rename : cpu/o3/lsq_impl.hh => src/cpu/o3/lsq_impl.hh
rename : cpu/o3/lsq_unit.hh => src/cpu/o3/lsq_unit.hh
rename : cpu/o3/lsq_unit_impl.hh => src/cpu/o3/lsq_unit_impl.hh
rename : cpu/o3/mem_dep_unit_impl.hh => src/cpu/o3/mem_dep_unit_impl.hh
rename : cpu/o3/rename.hh => src/cpu/o3/rename.hh
rename : cpu/o3/rename_impl.hh => src/cpu/o3/rename_impl.hh
rename : cpu/o3/thread_state.hh => src/cpu/o3/thread_state.hh
rename : cpu/o3/tournament_pred.cc => src/cpu/o3/tournament_pred.cc
rename : cpu/o3/tournament_pred.hh => src/cpu/o3/tournament_pred.hh
rename : cpu/checker/cpu_builder.cc => src/cpu/ozone/checker_builder.cc
rename : cpu/ozone/cpu.hh => src/cpu/ozone/cpu.hh
rename : cpu/ozone/cpu_builder.cc => src/cpu/ozone/cpu_builder.cc
rename : cpu/ozone/cpu_impl.hh => src/cpu/ozone/cpu_impl.hh
rename : cpu/ozone/front_end.hh => src/cpu/ozone/front_end.hh
rename : cpu/ozone/front_end_impl.hh => src/cpu/ozone/front_end_impl.hh
rename : cpu/ozone/inorder_back_end_impl.hh => src/cpu/ozone/inorder_back_end_impl.hh
rename : cpu/ozone/inst_queue_impl.hh => src/cpu/ozone/inst_queue_impl.hh
rename : cpu/ozone/lw_back_end.hh => src/cpu/ozone/lw_back_end.hh
rename : cpu/ozone/lw_back_end_impl.hh => src/cpu/ozone/lw_back_end_impl.hh
rename : cpu/ozone/lw_lsq.hh => src/cpu/ozone/lw_lsq.hh
rename : cpu/ozone/lw_lsq_impl.hh => src/cpu/ozone/lw_lsq_impl.hh
rename : cpu/ozone/simple_params.hh => src/cpu/ozone/simple_params.hh
rename : cpu/ozone/thread_state.hh => src/cpu/ozone/thread_state.hh
rename : cpu/simple/cpu.cc => src/cpu/simple/base.cc
rename : cpu/cpu_exec_context.cc => src/cpu/simple_thread.cc
rename : cpu/thread_state.hh => src/cpu/thread_state.hh
rename : dev/ide_disk.hh => src/dev/ide_disk.hh
rename : python/m5/objects/BaseCPU.py => src/python/m5/objects/BaseCPU.py
rename : python/m5/objects/AlphaFullCPU.py => src/python/m5/objects/O3CPU.py
rename : python/m5/objects/OzoneCPU.py => src/python/m5/objects/OzoneCPU.py
rename : python/m5/objects/Root.py => src/python/m5/objects/Root.py
rename : python/m5/objects/System.py => src/python/m5/objects/System.py
rename : sim/eventq.hh => src/sim/eventq.hh
rename : sim/pseudo_inst.cc => src/sim/pseudo_inst.cc
rename : sim/pseudo_inst.hh => src/sim/pseudo_inst.hh
rename : sim/serialize.cc => src/sim/serialize.cc
rename : sim/stat_control.cc => src/sim/stat_control.cc
rename : sim/stat_control.hh => src/sim/stat_control.hh
rename : sim/system.hh => src/sim/system.hh
extra : convert_revision : 135d90e43f6cea89f9460ba4e23f4b0b85886e7d
2006-09-30 23:43:23 -04:00
Korey Sewell
82862e0e15 add ISA_HAS_DELAY_SLOT directive instead of "#if THE_ISA == ALPHA_ISA" throughout CPU models
src/arch/alpha/isa_traits.hh:
src/arch/mips/isa_traits.hh:
src/arch/sparc/isa_traits.hh:
    define 'ISA_HAS_DELAY_SLOT'
src/cpu/base_dyn_inst.hh:
src/cpu/o3/bpred_unit_impl.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/simple/base.cc:
    use ISA_HAS_DELAY_SLOT instead of THE_ISA == ALPHA_ISA

--HG--
extra : convert_revision : 24c7460d9391e8d443c9fe08e17c331ae8e9c36a
2006-08-31 20:51:30 -04:00
Gabe Black
74546aac01 Cleaned up include files and got rid of many using directives in header files.
--HG--
extra : convert_revision : 6b11e039cbc061dab75195fa1aebe6ca2cdc6f91
2006-08-15 05:07:15 -04:00
Korey Sewell
19ca97af79 This changeset gets the MIPS ISA pretty much working in the O3CPU. It builds, runs, and gets very very close to completing the hello world
succesfully but there are some minor quirks to iron out. Who would've known a DELAY SLOT introduces that much complexity?! arrgh!

Anyways, a lot of this stuff had to do with my project at MIPS and me needing to know how I was going to get this working for the MIPS
ISA. So I figured I would try to touch it up and throw it in here (I hate to introduce non-completely working components... )

src/arch/alpha/isa/mem.isa:
    spacing
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
    Gabe really authored this
src/arch/mips/isa/decoder.isa:
    add StoreConditional Flag to instruction
src/arch/mips/isa/formats/basic.isa:
    Steven really did this file
src/arch/mips/isa/formats/branch.isa:
    fix bug for uncond/cond control
src/arch/mips/isa/formats/mem.isa:
    Adjust O3CPU memory access to use new memory model interface.
src/arch/mips/isa/formats/util.isa:
    update LoadStoreBase template
src/arch/mips/isa_traits.cc:
    update SERIALIZE partially
src/arch/mips/process.cc:
src/arch/mips/process.hh:
    no need for this for NOW. ASID/Virtual addressing handles it
src/arch/mips/regfile/misc_regfile.hh:
    add in clear() function and comments for future usage of special misc. regs
src/cpu/base_dyn_inst.hh:
    add in nextNPC variable and supporting functions.

    add isCondDelaySlot function

    Update predTaken and mispredicted functions
src/cpu/base_dyn_inst_impl.hh:
    init nextNPC
src/cpu/o3/SConscript:
    add MIPS files to compile
src/cpu/o3/alpha/thread_context.hh:
    no need for my name on this file
src/cpu/o3/bpred_unit_impl.hh:
    Update RAS appropriately for MIPS
src/cpu/o3/comm.hh:
    add some extra communication variables to aid in handling the
    delay slots
src/cpu/o3/commit.hh:
    minor name fix for nextNPC functions.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/rename_impl.hh:
    Fix necessary variables and functions for squashes with delay slots
src/cpu/o3/cpu.cc:
    Update function interface ...

    adjust removeInstsNotInROB function to recognize delay slots insts
src/cpu/o3/cpu.hh:
    update removeInstsNotInROB
src/cpu/o3/decode.hh:
    declare necessary variables for handling delay slot
src/cpu/o3/dyn_inst.hh:
    Add in MipsDynInst
src/cpu/o3/fetch.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/rename.hh:
    declare necessary variables and adjust functions for handling delay slot
src/cpu/o3/inst_queue.hh:
src/cpu/simple/base.cc:
    no need for my name here
src/cpu/o3/isa_specific.hh:
    add in MIPS files
src/cpu/o3/scoreboard.hh:
    dont include alpha specific isa traits!
src/cpu/o3/thread_context.hh:
    no need for my name here, i just rearranged where the file goes
src/cpu/static_inst.hh:
    add isCondDelaySlot function
src/cpu/o3/mips/cpu.cc:
src/cpu/o3/mips/cpu.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/mips/dyn_inst.cc:
src/cpu/o3/mips/dyn_inst.hh:
src/cpu/o3/mips/dyn_inst_impl.hh:
src/cpu/o3/mips/impl.hh:
src/cpu/o3/mips/params.hh:
src/cpu/o3/mips/thread_context.cc:
src/cpu/o3/mips/thread_context.hh:
    MIPS file for O3CPU...mirrors ALPHA definition

--HG--
extra : convert_revision : 9bb199b4085903e49ffd5a4c8ac44d11460d988c
2006-07-23 13:39:42 -04:00
Kevin Lim
b973fae85d Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge

src/base/traceflags.py:
src/cpu/SConscript:
    Hand merge.
src/cpu/o3/alpha/params.hh:
    Hand merge.  This needs to get changed.

--HG--
rename : src/cpu/o3/alpha_cpu_builder.cc => src/cpu/o3/alpha/cpu_builder.cc
rename : src/cpu/o3/alpha_params.hh => src/cpu/o3/alpha/params.hh
rename : src/python/m5/objects/AlphaO3CPU.py => src/python/m5/objects/O3CPU.py
extra : convert_revision : 581f338f5bce35288f7d15d95cbd0ac3a9135e6a
2006-07-05 16:08:18 -04:00
Kevin Lim
b84103811d Add some different parameters. The main change is that the writeback count is now limited so that it doesn't overflow the buffer.
src/cpu/o3/alpha_cpu_builder.cc:
src/cpu/o3/alpha_params.hh:
    Add in dispatchWidth, wbWidth, wbDepth parameters.  wbDepth is the number of cycles of wbWidth instructions that can be buffered.
src/cpu/o3/iew.hh:
    Include separate parameter for dispatch width.
    Also limit the number of outstanding writebacks so the writeback buffer isn't overflowed.  The IQ must make sure with the IEW stage that it can issue instructions prior to issuing.
src/cpu/o3/iew_impl.hh:
    Include separate parameter for dispatch width.
    Also limit the number of outstanding writebacks so the writeback buffer isn't overflowed.
src/cpu/o3/inst_queue_impl.hh:
    IQ needs to check with the IEW to make sure it can issue instructions, and increments the IEW wb counter each time there is an outstanding instruction that will writeback.
src/cpu/o3/lsq_unit_impl.hh:
    Be sure to decrement the writeback counter if there's a squashed load that returned.
src/python/m5/objects/AlphaO3CPU.py:
    Change the parameters to include dispatch width, writeback width, and writeback depth.

--HG--
extra : convert_revision : 31c8cc495273e3c481b79055562fc40f71291fc4
2006-07-05 15:51:36 -04:00
Korey Sewell
c8b3d8a1ed Fix default SMT configuration in O3CPU (i.e. fetch policy, workloads/numThreads)
Edit Test3 for newmem

src/base/traceflags.py:
    Add O3CPU flag
src/cpu/base.cc:
    for some reason adding a BaseCPU flag doesnt work so just go back to old way...
src/cpu/o3/alpha/cpu_builder.cc:
    Determine number threads by workload size instead of solely by parameter.

    Default SMT fetch policy to RoundRobin if it's not specified in Config file
src/cpu/o3/commit.hh:
    only use nextNPC for !ALPHA
src/cpu/o3/commit_impl.hh:
    add FetchTrapPending as condition for commit
src/cpu/o3/cpu.cc:
    panic if active threads is more than Impl::MaxThreads
src/cpu/o3/fetch.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/rob.hh:
src/cpu/o3/rob_impl.hh:
    name stuff
src/cpu/o3/fetch_impl.hh:
    fatal if try to use SMT branch count, that's unimplemented right now
src/python/m5/config.py:
    make it clearer that a parameter is not valid within a configuration class

--HG--
extra : convert_revision : 55069847304e40e257f9225f0dc3894ce6491b34
2006-07-02 23:11:24 -04:00
Kevin Lim
5d11e8bff6 Minor code cleanup of BaseDynInst.
src/cpu/base_dyn_inst.cc:
src/cpu/base_dyn_inst.hh:
    Minor code cleanup by putting several bools into a bitset instead.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/rob_impl.hh:
    Changed around some things in BaseDynInst.

--HG--
extra : convert_revision : 1db363d69a863cc8744cc9f9ec542ade8472eb42
2006-06-14 13:12:41 -04:00
Kevin Lim
2f043aafbc Minor updates for stats.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/fetch.hh:
    Update stats comments.
src/cpu/o3/fetch_impl.hh:
    Differentiate stats.
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/inst_queue_impl.hh:
    Update for stats.
src/cpu/o3/lsq.hh:
    LSQ now has stats.
src/cpu/o3/lsq_impl.hh:
    Register stats of all LSQ units.
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
    Add in stats.

--HG--
extra : convert_revision : 7672ecf3c02515b268c28d5a986af1432197654a
2006-06-13 22:35:05 -04:00
Kevin Lim
c14c78fa3e Removing of old code and adding in new comments.
src/cpu/base_dyn_inst.cc:
    Clean up old functions, comments.
src/cpu/o3/alpha_cpu_builder.cc:
src/cpu/o3/alpha_params.hh:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/ozone/lsq_unit.hh:
src/cpu/ozone/lsq_unit_impl.hh:
    Remove old commented code.
src/cpu/o3/fetch.hh:
    Remove old commented code, add in comments.
src/cpu/o3/inst_queue_impl.hh:
    Move comment to better place.
src/cpu/o3/lsq_unit.hh:
    Remove old commented code, add in new comments.
src/cpu/o3/lsq_unit_impl.hh:
    Remove old commented code, rename variable.

--HG--
extra : convert_revision : 8e79af9b4d3b3bdd0f55e4747c6ab64c9ad2f571
2006-06-09 16:28:17 -04:00
Kevin Lim
984c2a4ff6 Merge ktlim@zamp:/z/ktlim2/clean/m5-o3
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge

src/cpu/checker/o3_cpu_builder.cc:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/bpred_unit.cc:
src/cpu/o3/commit.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
src/cpu/o3/thread_state.hh:
    Hand merge.

--HG--
rename : cpu/activity.cc => src/cpu/activity.cc
rename : cpu/activity.hh => src/cpu/activity.hh
rename : cpu/base_dyn_inst.cc => src/cpu/base_dyn_inst.cc
rename : cpu/checker/cpu.hh => src/cpu/checker/cpu.hh
rename : cpu/checker/cpu_builder.cc => src/cpu/checker/cpu_builder.cc
rename : cpu/checker/exec_context.hh => src/cpu/checker/exec_context.hh
rename : cpu/checker/o3_cpu_builder.cc => src/cpu/checker/o3_cpu_builder.cc
rename : cpu/o3/2bit_local_pred.cc => src/cpu/o3/2bit_local_pred.cc
rename : cpu/o3/2bit_local_pred.hh => src/cpu/o3/2bit_local_pred.hh
rename : cpu/o3/alpha_cpu.hh => src/cpu/o3/alpha_cpu.hh
rename : cpu/o3/alpha_cpu_builder.cc => src/cpu/o3/alpha_cpu_builder.cc
rename : cpu/o3/alpha_cpu_impl.hh => src/cpu/o3/alpha_cpu_impl.hh
rename : cpu/o3/alpha_dyn_inst.hh => src/cpu/o3/alpha_dyn_inst.hh
rename : cpu/o3/alpha_dyn_inst_impl.hh => src/cpu/o3/alpha_dyn_inst_impl.hh
rename : cpu/o3/alpha_params.hh => src/cpu/o3/alpha_params.hh
rename : cpu/o3/bpred_unit.cc => src/cpu/o3/bpred_unit.cc
rename : cpu/o3/bpred_unit.hh => src/cpu/o3/bpred_unit.hh
rename : cpu/o3/bpred_unit_impl.hh => src/cpu/o3/bpred_unit_impl.hh
rename : cpu/o3/comm.hh => src/cpu/o3/comm.hh
rename : cpu/o3/commit.hh => src/cpu/o3/commit.hh
rename : cpu/o3/commit_impl.hh => src/cpu/o3/commit_impl.hh
rename : cpu/o3/cpu.hh => src/cpu/o3/cpu.hh
rename : cpu/o3/cpu_policy.hh => src/cpu/o3/cpu_policy.hh
rename : cpu/o3/decode.hh => src/cpu/o3/decode.hh
rename : cpu/o3/decode_impl.hh => src/cpu/o3/decode_impl.hh
rename : cpu/o3/dep_graph.hh => src/cpu/o3/dep_graph.hh
rename : cpu/o3/fetch.hh => src/cpu/o3/fetch.hh
rename : cpu/o3/fetch_impl.hh => src/cpu/o3/fetch_impl.hh
rename : cpu/o3/fu_pool.cc => src/cpu/o3/fu_pool.cc
rename : cpu/o3/fu_pool.hh => src/cpu/o3/fu_pool.hh
rename : cpu/o3/iew.hh => src/cpu/o3/iew.hh
rename : cpu/o3/iew_impl.hh => src/cpu/o3/iew_impl.hh
rename : cpu/o3/inst_queue.hh => src/cpu/o3/inst_queue.hh
rename : cpu/o3/inst_queue_impl.hh => src/cpu/o3/inst_queue_impl.hh
rename : cpu/o3/lsq.hh => src/cpu/o3/lsq.hh
rename : cpu/o3/lsq_unit.hh => src/cpu/o3/lsq_unit.hh
rename : cpu/o3/lsq_unit_impl.hh => src/cpu/o3/lsq_unit_impl.hh
rename : cpu/o3/mem_dep_unit.hh => src/cpu/o3/mem_dep_unit.hh
rename : cpu/o3/mem_dep_unit_impl.hh => src/cpu/o3/mem_dep_unit_impl.hh
rename : cpu/o3/rename.hh => src/cpu/o3/rename.hh
rename : cpu/o3/rename_impl.hh => src/cpu/o3/rename_impl.hh
rename : cpu/o3/rename_map.hh => src/cpu/o3/rename_map.hh
rename : cpu/o3/rob.hh => src/cpu/o3/rob.hh
rename : cpu/o3/store_set.cc => src/cpu/o3/store_set.cc
rename : cpu/o3/store_set.hh => src/cpu/o3/store_set.hh
rename : cpu/o3/thread_state.hh => src/cpu/o3/thread_state.hh
rename : cpu/o3/tournament_pred.cc => src/cpu/o3/tournament_pred.cc
rename : cpu/o3/tournament_pred.hh => src/cpu/o3/tournament_pred.hh
rename : cpu/ozone/cpu_builder.cc => src/cpu/ozone/cpu_builder.cc
rename : cpu/ozone/ozone_impl.hh => src/cpu/ozone/ozone_impl.hh
rename : cpu/ozone/simple_impl.hh => src/cpu/ozone/simple_impl.hh
rename : cpu/ozone/simple_params.hh => src/cpu/ozone/simple_params.hh
rename : python/m5/objects/AlphaFullCPU.py => src/python/m5/objects/AlphaFullCPU.py
rename : python/m5/objects/OzoneCPU.py => src/python/m5/objects/OzoneCPU.py
extra : convert_revision : b7be30474dd03dd3970e737a9d0489aeb2ead84f
2006-06-04 16:07:54 -04:00
Kevin Lim
d2d581cf01 Merge ktlim@zizzer:/bk/newmem
into  zizzer.eecs.umich.edu:/.automount/zamp/z/ktlim2/clean/newmem

--HG--
extra : convert_revision : 1d2f499bdc6e21c658a9262da1c8d27d6b74cafe
2006-06-02 18:19:50 -04:00
Kevin Lim
7940c10ace Fixes to get compiling to work. This is mainly fixing up some includes; changing functions within the XCs; changing MemReqPtrs to Requests or Packets where appropriate.
Currently the O3 and Ozone CPUs do not work in the new memory system; I still need to fix up the ports to work and handle responses properly.  This check-in is so that the merge between m5 and newmem is no longer outstanding.

src/SConscript:
    Need to include FU Pool for new CPU model.  I'll try to figure out a cleaner way to handle this in the future.
src/base/traceflags.py:
    Include new traces flags, fix up merge mess up.
src/cpu/SConscript:
    Include the base_dyn_inst.cc as one of othe sources.
    Don't compile the Ozone CPU for now.
src/cpu/base.cc:
    Remove an extra } from the merge.
src/cpu/base_dyn_inst.cc:
    Fixes to make compiling work.  Don't instantiate the OzoneCPU for now.
src/cpu/base_dyn_inst.hh:
src/cpu/o3/2bit_local_pred.cc:
src/cpu/o3/alpha_cpu_builder.cc:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/o3/alpha_dyn_inst.hh:
src/cpu/o3/alpha_params.hh:
src/cpu/o3/bpred_unit.cc:
src/cpu/o3/btb.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/free_list.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/sat_counter.hh:
src/cpu/op_class.hh:
src/cpu/ozone/cpu.hh:
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/exec_context.hh:
src/cpu/checker/o3_cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/mem/request.hh:
src/cpu/o3/fu_pool.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/back_end.hh:
src/cpu/ozone/dyn_inst.cc:
src/cpu/ozone/dyn_inst.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/inorder_back_end.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/ozone_impl.hh:
src/cpu/ozone/thread_state.hh:
    Fixes to get compiling to work.
src/cpu/o3/alpha_cpu.hh:
    Fixes to get compiling to work.
    Float reg accessors have changed, as well as MemReqPtrs to RequestPtrs.
src/cpu/o3/alpha_dyn_inst_impl.hh:
    Fixes to get compiling to work.
    Pass in the packet to the completeAcc function.
    Fix up syscall function.

--HG--
rename : cpu/activity.cc => src/cpu/activity.cc
rename : cpu/activity.hh => src/cpu/activity.hh
rename : cpu/checker/cpu.cc => src/cpu/checker/cpu.cc
rename : cpu/checker/cpu.hh => src/cpu/checker/cpu.hh
rename : cpu/checker/cpu_builder.cc => src/cpu/checker/cpu_builder.cc
rename : cpu/checker/exec_context.hh => src/cpu/checker/exec_context.hh
rename : cpu/checker/o3_cpu_builder.cc => src/cpu/checker/o3_cpu_builder.cc
rename : cpu/o3/dep_graph.hh => src/cpu/o3/dep_graph.hh
rename : cpu/o3/fu_pool.cc => src/cpu/o3/fu_pool.cc
rename : cpu/o3/fu_pool.hh => src/cpu/o3/fu_pool.hh
rename : cpu/o3/lsq.cc => src/cpu/o3/lsq.cc
rename : cpu/o3/lsq.hh => src/cpu/o3/lsq.hh
rename : cpu/o3/lsq_impl.hh => src/cpu/o3/lsq_impl.hh
rename : cpu/o3/lsq_unit.cc => src/cpu/o3/lsq_unit.cc
rename : cpu/o3/lsq_unit.hh => src/cpu/o3/lsq_unit.hh
rename : cpu/o3/lsq_unit_impl.hh => src/cpu/o3/lsq_unit_impl.hh
rename : cpu/o3/scoreboard.cc => src/cpu/o3/scoreboard.cc
rename : cpu/o3/scoreboard.hh => src/cpu/o3/scoreboard.hh
rename : cpu/o3/thread_state.hh => src/cpu/o3/thread_state.hh
rename : cpu/ozone/back_end.cc => src/cpu/ozone/back_end.cc
rename : cpu/ozone/back_end.hh => src/cpu/ozone/back_end.hh
rename : cpu/ozone/back_end_impl.hh => src/cpu/ozone/back_end_impl.hh
rename : cpu/ozone/cpu_builder.cc => src/cpu/ozone/cpu_builder.cc
rename : cpu/ozone/dyn_inst.cc => src/cpu/ozone/dyn_inst.cc
rename : cpu/ozone/dyn_inst.hh => src/cpu/ozone/dyn_inst.hh
rename : cpu/ozone/dyn_inst_impl.hh => src/cpu/ozone/dyn_inst_impl.hh
rename : cpu/ozone/front_end.cc => src/cpu/ozone/front_end.cc
rename : cpu/ozone/front_end.hh => src/cpu/ozone/front_end.hh
rename : cpu/ozone/front_end_impl.hh => src/cpu/ozone/front_end_impl.hh
rename : cpu/ozone/inorder_back_end.cc => src/cpu/ozone/inorder_back_end.cc
rename : cpu/ozone/inorder_back_end.hh => src/cpu/ozone/inorder_back_end.hh
rename : cpu/ozone/inorder_back_end_impl.hh => src/cpu/ozone/inorder_back_end_impl.hh
rename : cpu/ozone/inst_queue.cc => src/cpu/ozone/inst_queue.cc
rename : cpu/ozone/inst_queue.hh => src/cpu/ozone/inst_queue.hh
rename : cpu/ozone/inst_queue_impl.hh => src/cpu/ozone/inst_queue_impl.hh
rename : cpu/ozone/lsq_unit.cc => src/cpu/ozone/lsq_unit.cc
rename : cpu/ozone/lsq_unit.hh => src/cpu/ozone/lsq_unit.hh
rename : cpu/ozone/lsq_unit_impl.hh => src/cpu/ozone/lsq_unit_impl.hh
rename : cpu/ozone/lw_back_end.cc => src/cpu/ozone/lw_back_end.cc
rename : cpu/ozone/lw_back_end.hh => src/cpu/ozone/lw_back_end.hh
rename : cpu/ozone/lw_back_end_impl.hh => src/cpu/ozone/lw_back_end_impl.hh
rename : cpu/ozone/lw_lsq.cc => src/cpu/ozone/lw_lsq.cc
rename : cpu/ozone/lw_lsq.hh => src/cpu/ozone/lw_lsq.hh
rename : cpu/ozone/lw_lsq_impl.hh => src/cpu/ozone/lw_lsq_impl.hh
rename : cpu/ozone/null_predictor.hh => src/cpu/ozone/null_predictor.hh
rename : cpu/ozone/ozone_impl.hh => src/cpu/ozone/ozone_impl.hh
rename : cpu/ozone/rename_table.cc => src/cpu/ozone/rename_table.cc
rename : cpu/ozone/rename_table.hh => src/cpu/ozone/rename_table.hh
rename : cpu/ozone/rename_table_impl.hh => src/cpu/ozone/rename_table_impl.hh
rename : cpu/ozone/simple_impl.hh => src/cpu/ozone/simple_impl.hh
rename : cpu/ozone/simple_params.hh => src/cpu/ozone/simple_params.hh
rename : cpu/ozone/thread_state.hh => src/cpu/ozone/thread_state.hh
rename : cpu/quiesce_event.cc => src/cpu/quiesce_event.cc
rename : cpu/quiesce_event.hh => src/cpu/quiesce_event.hh
rename : cpu/thread_state.hh => src/cpu/thread_state.hh
rename : python/m5/objects/FUPool.py => src/python/m5/objects/FUPool.py
rename : python/m5/objects/OzoneCPU.py => src/python/m5/objects/OzoneCPU.py
rename : python/m5/objects/SimpleOzoneCPU.py => src/python/m5/objects/SimpleOzoneCPU.py
extra : convert_revision : ca7f0fbf65ee1a70d482fb4eda9a1840c7f9b8f8
2006-06-02 18:15:20 -04:00