Key new functions that can be called on the m5 object at the python interpreter:
doQuiesce(root) - A helper function that quiesces the object passed in and all of its children.
resume(root) - Another helper function that tells the object and all of its children that the quiesce is over.
checkpoint(root) - Takes a checkpoint of the system. Checkpoint directory must be set before hand.
setCheckpointDir(name) - Sets the checkpoint directory.
restoreCheckpoint(root) - Restores the values from the checkpoint located in the checkpoint directory.
changeToAtomic(system) - Changes the system and all of its children to atomic memory mode.
changeToTiming(system) - Changes the system and all of its children to timing memory mode.
switchCpus(list) - Takes in a list of tuples, where each tuple is a pair of (old CPU, new CPU). Quiesces the old CPUs, and then switches over to the new CPUs.
src/SConscript:
Remove serializer, replaced by python code.
src/python/m5/__init__.py:
Updates to support quiescing, checkpointing, changing memory modes, and switching CPUs.
src/python/m5/config.py:
Several functions defined on the SimObject for quiescing, changing timing modes, and switching CPUs
src/sim/main.cc:
Add some extra functions that are exported to python through SWIG.
src/sim/serialize.cc:
Change serialization around a bit. Now it is controlled through Python, so there's no need for SerializeEvents or SerializeParams.
Also add in a new unserializeAll() function that loads a checkpoint and handles unserializing all objects.
src/sim/serialize.hh:
Add unserializeAll function and a setCheckpointName function.
src/sim/sim_events.cc:
Add process() function for CountedQuiesceEvent, which calls exitSimLoop() once its counter reaches 0.
src/sim/sim_events.hh:
Add in a CountedQuiesceEvent, which is used when the system is preparing to quiesce. Any objects that can't be quiesced immediately are given a pointer to a CountedQuiesceEvent. The event has its counter set via Python, and as objects finish quiescing they call process() on the event. Eventually the event causes the simulation to stop once all objects have quiesced.
src/sim/sim_object.cc:
Add a few functions for quiescing, checkpointing, and changing memory modes.
src/sim/sim_object.hh:
Add a state variable to all SimObjects that tracks both the timing mode of the object and the quiesce state of the object. Currently this isn't serialized, and I'm not sure it needs to be so long as the timing mode starts up the same after a checkpoint.
--HG--
extra : convert_revision : a8c738d3911c68d5a7caf7de24d732dcc62cfb61
Some implementation details were left blank still, need to fill them in.
src/SConscript:
Reorder build to compile all files first
src/mem/cache/cache.hh:
src/mem/cache/cache_builder.cc:
src/mem/cache/cache_impl.hh:
src/mem/cache/coherence/coherence_protocol.cc:
src/mem/cache/coherence/uni_coherence.cc:
src/mem/cache/coherence/uni_coherence.hh:
src/mem/cache/miss/blocking_buffer.cc:
src/mem/cache/miss/miss_queue.cc:
src/mem/cache/miss/mshr.cc:
src/mem/cache/miss/mshr.hh:
src/mem/cache/miss/mshr_queue.cc:
More changesets pulled, now compiles everything in /miss directory and in the root directory
src/mem/packet.hh:
Add some more support, need to clean some of it out once everything is working
--HG--
extra : convert_revision : ba73676165810edf2c2effaf5fbad8397d6bd800
src/cpu/simple/base.cc:
add syscall emulation page table fault so we can allocate more stack pages
FaultBase::invoke will do this, we don't need to do it here
src/sim/faults.hh:
I have no idea why this #if was there... gone
src/sim/process.cc:
make stack_min actually be the current minimum
--HG--
extra : convert_revision : 9786b39f2747b94654a5d77c74243cd20503add4
src/cpu/ozone/cpu.hh:
Fixes to get OzoneCPU working in SE/FS again.
src/cpu/ozone/cpu_impl.hh:
Be sure to set up ports properly.
src/cpu/ozone/front_end.hh:
Allow port to be created without specifying its name at the beginning.
src/cpu/ozone/front_end_impl.hh:
Setup port properly, also only use checker if it's enabled.
src/cpu/ozone/lw_back_end_impl.hh:
Be sure to initialize variables.
src/cpu/ozone/lw_lsq.hh:
Handle locked flag for UP systems.
src/cpu/ozone/lw_lsq_impl.hh:
Initialize all variables.
src/python/m5/objects/OzoneCPU.py:
Fix up config.
--HG--
extra : convert_revision : c99e7bf82fc0dd1099c7a82eaebd58ab6017764d
src/cpu/o3/cpu.cc:
Updates to make sure the checker is compiled in if enabled and also to include it only when it's used.
--HG--
extra : convert_revision : c48ead5b2665dc858acd87c2ee99d39d80594a69
The changes largely are fixing up the memory accesses to use ports/Requests/Packets, supporting the splitting off of instantiation of template classes, and handling some of the reorganization that happened.
OzoneCPU is untested for now but at least compiles. Fixes will be coming shortly.
SConstruct:
Remove OzoneSimpleCPU from list of CPUs.
src/cpu/SConscript:
Leave out OzoneSimpleCPU.
src/cpu/ozone/bpred_unit.cc:
Fixes to get OzoneCPU to compile.
src/cpu/ozone/checker_builder.cc:
src/cpu/ozone/cpu.cc:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/dyn_inst.hh:
src/cpu/ozone/dyn_inst_impl.hh:
src/cpu/ozone/front_end.cc:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/ozone_impl.hh:
src/cpu/ozone/rename_table.cc:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
Fixes to get OzoneCPU back to compiling.
--HG--
extra : convert_revision : 90ffb397263bcf9fea3987317272c64f2b20f7e6
src/cpu/o3/alpha_dyn_inst_impl.hh:
Consolidate these calls into one.
src/cpu/o3/commit_impl.hh:
Include checker only if it's being used.
src/cpu/o3/fetch_impl.hh:
Do not deallocate request if it's a squashed response that was received.
src/cpu/o3/lsq_unit.hh:
Add in comment.
src/cpu/o3/lsq_unit_impl.hh:
Only include checker if it's being used.
--HG--
extra : convert_revision : aae0bf1e19baae90f1e61d41191548612bbb3be6
configs/test/SysPaths.py:
remove some tabs and add /n/poolfs/z/dist/m5/system
src/dev/io_device.cc:
fix since pio timing dma packts colud be nacked too
src/dev/io_device.hh:
move DmaReqState into DmaDevie
--HG--
extra : convert_revision : 2b5300d85ab33b3753afc54bc6a04a47b6e00d20
src/cpu/o3/alpha_cpu.hh:
Fix #define in header.
util/rundiff:
Fix file comments to be more correct.
util/tracediff:
Update comments to be more correct.
--HG--
extra : convert_revision : a28030ce8979de3d9361191c6af23743460dc53e
src/python/m5/__init__.py:
Change up options. Now setting the flag enables/disables, each of which is the opposite of the default values found in the Python class.
--HG--
extra : convert_revision : 23889b89e6105a437a74906587d90ab6ba885c97
SConstruct:
Remove check for Checker from this SConstruct
src/arch/SConscript:
Specific check if CheckerCPU is being used. Not the cleanest, but works for now.
src/cpu/SConscript:
Code to handle using the CheckerCPU a little better. Allows -c to be used normally.
--HG--
extra : convert_revision : 0a82f16db0f38e5ce114d08368477bd211331fa3
src/cpu/SConscript:
Split off instantiations into separate CC files. This makes it easier to split them per CPU model.
src/cpu/base_dyn_inst_impl.hh:
Move instantations out of impl.hh file and into a cc file.
src/cpu/checker/cpu_impl.hh:
Move instantiations over to .cc files inside each CPU's directory. Makes it easier to only use what's actually included.
src/cpu/o3/bpred_unit.cc:
Pull Ozone instantiations out of this .cc file; put them into the ozone's CC file.
src/cpu/o3/checker_builder.cc:
Instantiate Checker for O3 CPU.
src/cpu/ozone/checker_builder.cc:
Instantiate Checker for Ozone CPU.
--HG--
rename : src/cpu/base_dyn_inst.cc => src/cpu/base_dyn_inst_impl.hh
rename : src/cpu/checker/cpu.cc => src/cpu/checker/cpu_impl.hh
rename : src/cpu/checker/o3_builder.cc => src/cpu/o3/checker_builder.cc
rename : src/cpu/checker/ozone_builder.cc => src/cpu/ozone/checker_builder.cc
extra : convert_revision : 4e5f928b165379c06d31071c544ea46cf0b8fa71
src/dev/alpha_console.cc:
Remove my name twice from header
src/dev/ide_disk.cc:
Spell my full name correctly
src/mem/bus.hh:
I think I edited much of this
src/sim/byteswap.hh:
I believe most of this code is mine or nate's
--HG--
extra : convert_revision : b672b5de5492e04d2880fb51e7d63bc5587f2954
src/kern/linux/linux.hh:
src/kern/solaris/solaris.hh:
Rename BSD_HOST to the more specific NO_STAT64.
src/sim/byteswap.hh:
Replace set of swap_byte functions with a single
templated version. Hope this fixes compiler issues
with e.g. int32_t vs int disambiguation.
src/sim/syscall_emul.hh:
Rename BSD_HOST to the more specific NO_STAT64.
Set this for __CYGWIN__.
--HG--
extra : convert_revision : 86a63b4b60d2445a566321333381d79ba8ab63c4
clear from the Python side that this is the
interface to C++.
src/SConscript:
main_wrap.cc -> cc_main_wrap.cc
src/python/SConscript:
src/python/m5/__init__.py:
src/sim/main.cc:
s/main/cc_main/
src/python/m5/config.py:
s/main/cc_main/
Also directly import cc_main so we don't need
to put the "m5." in front all the time.
--HG--
extra : convert_revision : 755552f70cf671881ff31e476c677b95ef12950d
that's already being used for "detailed cpu".
Needed to add extra function for user script
to pass parsed options back to m5 module.
configs/test/fs.py:
configs/test/test.py:
Call setStandardOptions().
src/python/m5/__init__.py:
Add --outdir option.
Add setStandardOptions() so user script can
pass parsed options back to m5 module.
src/sim/main.cc:
Add SWIG-wrappable function to set output dir.
--HG--
extra : convert_revision : 1323bee69ca920c699a1cd1218e15b7b0875c1e5
SConstruct:
Fix paths in comments and other minor comment edits.
src/cpu/SConscript:
Fix path in comment.
--HG--
extra : convert_revision : c02aa9cefd8c5ad791ad2f1653c1554a4aa8ffbd
src/python/m5/__init__.py:
Add in some of the commonly used Trace/ExeTrace/Debug options. Not terribly clean but it works.
--HG--
extra : convert_revision : abb3cb4892512483a5031606baabf6540019233c
src/SConscript:
Split off FuncUnits from old FUPool so I'm not including encumbered code. This was all written by Steve Raasch so it's safe to include in the main tree.
src/cpu/o3/fu_pool.cc:
Include the func unit file that's not in the encumbered directory.
--HG--
extra : convert_revision : 9801c606961dd2d62dba190d13a76069992bf241
src/arch/alpha/isa/decoder.isa:
Surround Erik's old copy code with #ifdefs. This way the copy functions don't need to be included in the ExecContext (until somebody decides to add them back in).
--HG--
extra : convert_revision : 508ca387757a32bb616e5b4b07af17787a76970e
src/cpu/checker/cpu.cc:
Add in comment.
src/cpu/cpuevent.hh:
Fix up comment.
src/cpu/o3/bpred_unit.cc:
Comment out Ozone instantiations.
src/cpu/o3/dep_graph.hh:
Include destructor.
--HG--
extra : convert_revision : 549454ed11bc2fa49a0627f7fb8f96d00a9be303
First: Rename FullCPU and its variants in the o3 directory to O3CPU to differentiate from the old model, and also to specify it's an out of order model.
Second: Include build options for selecting the Checker to be used. These options make sure if the Checker is being used there is a CPU that supports it also being compiled.
SConstruct:
Add in option USE_CHECKER to allow for not compiling in checker code. The checker is enabled through this option instead of through the CPU_MODELS list. However it's still necessary to treat the Checker like a CPU model, so it is appended onto the CPU_MODELS list if enabled.
configs/test/test.py:
Name change for DetailedCPU to DetailedO3CPU. Also include option for max tick.
src/base/traceflags.py:
Add in O3CPU trace flag.
src/cpu/SConscript:
Rename AlphaFullCPU to AlphaO3CPU.
Only include checker sources if they're necessary. Also add a list of CPUs that support the Checker, and only allow the Checker to be compiled in if one of those CPUs are also being included.
src/cpu/base_dyn_inst.cc:
src/cpu/base_dyn_inst.hh:
Rename typedef to ImplCPU instead of FullCPU, to differentiate from the old FullCPU.
src/cpu/cpu_models.py:
src/cpu/o3/alpha_cpu.cc:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_builder.cc:
src/cpu/o3/alpha_cpu_impl.hh:
Rename AlphaFullCPU to AlphaO3CPU to differentiate from old FullCPU model.
src/cpu/o3/alpha_dyn_inst.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/alpha_impl.hh:
src/cpu/o3/alpha_params.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/cpu.hh:
src/cpu/o3/decode.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/rename.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/rob.hh:
src/cpu/o3/rob_impl.hh:
src/cpu/o3/thread_state.hh:
src/python/m5/objects/AlphaO3CPU.py:
Rename FullCPU to O3CPU to differentiate from old FullCPU model.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_unit_impl.hh:
Rename FullCPU to O3CPU to differentiate from old FullCPU model.
Also #ifdef the checker code so it doesn't need to be included if it's not selected.
--HG--
rename : src/cpu/checker/o3_cpu_builder.cc => src/cpu/checker/o3_builder.cc
rename : src/cpu/checker/cpu_builder.cc => src/cpu/checker/ozone_builder.cc
rename : src/python/m5/objects/AlphaFullCPU.py => src/python/m5/objects/AlphaO3CPU.py
extra : convert_revision : 86619baf257b8b7c8955efd447eba56e0d7acd6a
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
Updates for checker. Output more informative messages on error. Rename some functions. Add in option to warn (and not exit) on load results being incorrect.
src/cpu/checker/cpu_builder.cc:
src/cpu/checker/o3_cpu_builder.cc:
Add in parameter to warn (and not exit) on load result errors.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/lsq_unit_impl.hh:
Renamed checker functin.
--HG--
extra : convert_revision : d7aa28b8462691d20600f97a7213e2acd91c5665
Still need to add some code to fetch & commit stages
src/cpu/o3/commit.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
Add nextNPC read & set functions
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
Add nextNPC
--HG--
extra : convert_revision : 120677547d54091411399156bd066ce5baf785f7
Key was adding support for cloning port references (trickier than it sounds).
Got rid of class/instance thing and go back to instance cloning...
still don't allow changing SimObject parameters/children after a
class (instance) has been subclassed or instantiated (or cloned), which
should avoid bizarre unintended behavior.
configs/test/fs.py:
Add ".port" to busses to get a port reference.
Get rid of commented-out code.
src/python/m5/__init__.py:
resolveSimObject should call getCCObject() instead of createCCObject()
to avoid cycles in recursively creating objects.
src/python/m5/config.py:
Get rid of class/instance thing and go back to instance cloning.
Deep copy has to happen only on instance cloning then (and not on subclassing).
Add getCCObject() method to force creation of C++ SimObject without
recursively creating its children.
Add support for cloning port references (trickier than it sounds).
Also clean up some very obsolete comments.
src/python/m5/objects/Bridge.py:
src/python/m5/objects/Device.py:
Add ports.
--HG--
extra : convert_revision : 4816d05ead0de520748aace06dbd1911a33f0af8
Fix some author stuff and copyright dates
Take out full system code
src/arch/mips/isa/base.isa:
src/arch/mips/isa/bitfields.isa:
copyright info
src/arch/mips/isa/decoder.isa:
src/arch/mips/isa/formats/basic.isa:
src/arch/mips/isa/formats/branch.isa:
src/arch/mips/isa/formats/control.isa:
src/arch/mips/isa/formats/fp.isa:
src/arch/mips/isa/formats/int.isa:
src/arch/mips/isa/formats/mem.isa:
src/arch/mips/isa/formats/noop.isa:
src/arch/mips/isa/formats/tlbop.isa:
src/arch/mips/isa/formats/trap.isa:
src/arch/mips/isa/formats/unimp.isa:
src/arch/mips/isa/formats/unknown.isa:
src/arch/mips/isa/formats/util.isa:
src/arch/mips/isa/includes.isa:
src/arch/mips/isa/main.isa:
src/arch/mips/isa/operands.isa:
src/arch/mips/process.cc:
src/arch/mips/regfile/misc_regfile.hh:
src/arch/mips/stacktrace.hh:
copyright 2006
src/arch/mips/isa_traits.cc:
src/arch/mips/isa_traits.hh:
copyright 2006
take out full system
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/regfile.hh:
copyright 2006
use FloatRegVal
src/arch/mips/regfile/int_regfile.hh:
copyright 2006
move HI/LO to types.hh
src/arch/mips/types.hh:
copyright 2006
typedef FloatRegVal
--HG--
extra : convert_revision : 1d0d72cd655a4e28622745a6c6b06349da533a1d
src/arch/mips/isa/formats/trap.isa:
Take out fix that tried to fix trap
instruction disassembly. It forces bad
compile ..
configs/test/test.py:
add 'cycle' to exit message
--HG--
extra : convert_revision : 568877797fd2806416b4cbb388cc3f7eb2492627
into zazzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-release
--HG--
extra : convert_revision : 9b5b1419e8e22bce16ed97fc02c2008ca0181afc
src/cpu/base_dyn_inst.cc:
src/cpu/base_dyn_inst.hh:
Minor code cleanup by putting several bools into a bitset instead.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/rob_impl.hh:
Changed around some things in BaseDynInst.
--HG--
extra : convert_revision : 1db363d69a863cc8744cc9f9ec542ade8472eb42
into Python.
Add Port and VectorPort objects and support for
specifying port connections via assignment.
The whole C++ ConfigNode hierarchy is gone now, as are
C++ Connector objects.
configs/test/fs.py:
configs/test/test.py:
Rewrite for new port connector syntax.
src/SConscript:
Remove unneeded files:
- mem/connector.*
- sim/config*
src/dev/io_device.hh:
src/mem/bridge.cc:
src/mem/bridge.hh:
src/mem/bus.cc:
src/mem/bus.hh:
src/mem/mem_object.hh:
src/mem/physical.cc:
src/mem/physical.hh:
Allow getPort() to take an optional index to
support vector ports (eventually).
src/python/m5/__init__.py:
Move SimObject construction and port connection
operations into Python (with C++ calls).
src/python/m5/config.py:
Move SimObject construction and port connection
operations into Python (with C++ calls).
Add support for declaring and connecting MemObject
ports in Python.
src/python/m5/objects/Bus.py:
src/python/m5/objects/PhysicalMemory.py:
Add port declaration.
src/sim/builder.cc:
src/sim/builder.hh:
src/sim/serialize.cc:
src/sim/serialize.hh:
ConfigNodes are gone; builder just gets the
name of a .ini file section now.
src/sim/main.cc:
Move SimObject construction and port connection
operations into Python (with C++ calls).
Split remaining initialization operations into two parts,
loadIniFile() and finalInit().
src/sim/param.cc:
src/sim/param.hh:
SimObject resolution done globally in Python now
(not via ConfigNode hierarchy).
src/sim/sim_object.cc:
Remove unneeded #include.
--HG--
extra : convert_revision : 2fa4001eaaec0c9a4231ef6e854f8e156d930dfe
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-release
--HG--
extra : convert_revision : 78ef94172884c2db0f591c54657b28be5be7f61c
src/cpu/base_dyn_inst.cc:
Clean up some code and update.
src/cpu/base_dyn_inst.hh:
Clean up some code and update with more descriptive function names.
src/cpu/o3/alpha_cpu_builder.cc:
src/cpu/o3/alpha_params.hh:
src/cpu/o3/commit.hh:
Remove unused parameters.
src/cpu/o3/commit_impl.hh:
Remove unused parameters, also set squashCounter directly to the counted number of squashes.
src/cpu/o3/fetch_impl.hh:
Update for function name changes.
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
Remove unused parameter, move some code into a function.
--HG--
extra : convert_revision : 45abd77ad43dde2e93c2e53c4738c90ba8352a1d
src/arch/alpha/ev5.cc:
Fix memory leak. The faults are refcounted, but that only works if you're actually assigning them to a RefCountingPtr.
--HG--
extra : convert_revision : 9a57963eb5d5d86c16023bfedb0fb5ccdbe7efaa
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-release
--HG--
extra : convert_revision : 7ac7b9c9288e4940899766cd2dd55ef793d48d4d
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-release
--HG--
extra : convert_revision : 18a381fa230f2ef6d027359ffd619e3ae75cd446
Also delete no-longer-needed SPARC test.py files (should
have gone with my last chnageset where LiveProcess
became ISA-independent).
src/arch/SConscript:
Mistakenly committed hard-coded python binary name.
Should use same python to run isa_parser that was
used to run scons.
--HG--
extra : convert_revision : a3acd5496f3b930d57bb59ae164b8a4a8065bbf8
into ewok.(none):/home/gblack/m5/newmem
src/arch/sparc/regfile.hh:
Hand Merge
--HG--
extra : convert_revision : c47202689202069892524a7d71962082469996ee
bcak to main LiveProcess, then automatically select
ISA based on object file type. Now simulation scripts
no longer need to care about the ISA, as they can just
call LiveProcess().
configs/test/test.py:
Script no longer cares about ISA.
src/arch/alpha/process.cc:
src/arch/alpha/process.hh:
src/arch/mips/process.cc:
src/arch/mips/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/process.hh:
src/sim/process.cc:
src/sim/process.hh:
Move create() from arch-specific files back to
main LiveProcess, then automatically select ISA
based on object file type.
--HG--
extra : convert_revision : ef33ffdc79623b77000f5d68edd2026760b76ab6
- change include from exec_context.hh -> threadcontext.hh
- g++ 4.0.3 complaint about broken code (which it was).
- bad merge thread_context -> exec_context
src/arch/sparc/isa/includes.isa:
Fix SPARC_SE for exec_context->thread_context switch
src/arch/sparc/regfile.hh:
fix g++ 4.0.3 complaint about broken code (which it was).
src/cpu/thread_context.hh:
fix bad merge
--HG--
extra : convert_revision : f5bab822d5c25177756e9890e143b0ad8d704201
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-release
--HG--
extra : convert_revision : b73eeb1f73a5886a008919acd9e1971a79fd6bfb
src/arch/mips/isa/decoder.isa:
div,divu,ext,seb,seh, fp conditonal moves, fp indexed memory...
src/arch/mips/isa/formats/mem.isa:
MemoryNoDisp class .. use sext<> function instead of doing it manually
src/arch/mips/regfile/float_regfile.hh:
use bits function
--HG--
extra : convert_revision : cbbda9499185b91bdb2a6198fe1b961be04f9265
src/arch/mips/isa/formats/mt.isa:
change copyright to 2006
src/cpu/simple/base.cc:
Only DPRINT NNPC if we are not using ALPHA
src/cpu/static_inst.hh:
Take Out MIPS Specific functions ...
--HG--
extra : convert_revision : 7a69e80cd1564fa3b778b9dade0e9fe3cef94e64
after the class has been instantiated or subclassed.
This is one of the main situations that leads to
confusing results.
configs/test/fs.py:
Clean up to avoid modifying BaseCPU after it's been subclassed.
--HG--
extra : convert_revision : 335cb87bc3b211ecc8969cfb99ffc28f62f1f877
Provide a makeClass() method to generate a new class using
a SimObject instance as a template.
All instantiation, subclassing, and class generation is done
recursively using "deep copy"-style memoization to maintain
object relationships in the face of multiple references to
shared objects/classes.
src/python/m5/multidict.py:
Rename local dict attribute from 'dict' to 'local'
for clarity.
--HG--
extra : convert_revision : 73ed6836216308709d7bb68d09f8131acd5f1822
Minor fixes to ALPHA_FS and SPARC_SE.
SPARC_SE still does not compile... looks like there
are unresolved issues with ExecContext -> ThreadContext
rename/reorg.
configs/test/fs.py:
Port to new script interface/model.
configs/test/test.py:
Add support for running MIPS test(s) too via
command-line option.
src/arch/alpha/ev5.cc:
Fix include file.
src/arch/sparc/regfile.hh:
Make Bit64 a ULL constant to avoid compiler error.
--HG--
extra : convert_revision : c46c179758271c4f00171faaa579915846bf4624
src/python/m5/objects/FUPool.py:
src/python/m5/objects/OzoneCPU.py:
src/python/m5/objects/SimpleOzoneCPU.py:
Fix up imports (m5 namespace no longer includes m5.config).
--HG--
extra : convert_revision : 8575ef7d19ef8dfe9524723d7c4f85234d1280d2
into vm1.(none):/home/stever/bk/newmem-py
src/python/m5/__init__.py:
src/sim/syscall_emul.cc:
Hand merge.
--HG--
extra : convert_revision : e2542735323e648383c89382421d98a7d1d761bf
User script now invokes initialization and
simulation loop after building configuration.
These functions are exported from C++ to Python
using SWIG.
SConstruct:
Set up SWIG builder & scanner.
Set up symlinking of source files into build directory
(by not disabling the default behavior).
configs/test/test.py:
Rewrite to use new script-driven interface.
Include a sample option.
src/SConscript:
Set up symlinking of source files into build directory
(by not disabling the default behavior).
Add SWIG-generated main_wrap.cc to source list.
src/arch/SConscript:
Set up symlinking of source files into build directory
(by not disabling the default behavior).
src/arch/alpha/ev5.cc:
src/arch/alpha/isa/decoder.isa:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/trace/opt_cpu.cc:
src/cpu/trace/trace_cpu.cc:
src/sim/pseudo_inst.cc:
src/sim/root.cc:
src/sim/serialize.cc:
src/sim/syscall_emul.cc:
SimExit() is now exitSimLoop().
src/cpu/base.cc:
SimExitEvent is now SimLoopExitEvent
src/python/SConscript:
Add SWIG build command for main.i.
Use python/m5 in build dir as source for zip archive...
easy now with file duplication enabled.
src/python/m5/__init__.py:
- Move copyright notice back to C++ so we can print
it right away, even for interactive sessions.
- Get rid of argument parsing code; just provide default
option descriptors for user script to call optparse with.
- Don't clutter m5 namespace by sucking in all of m5.config
and m5.objects.
- Move instantiate() function here from config.py.
src/python/m5/config.py:
- Move instantiate() function to __init__.py.
- Param.Foo deferred type lookups must use m5.objects
namespace now (not m5).
src/python/m5/objects/AlphaConsole.py:
src/python/m5/objects/AlphaFullCPU.py:
src/python/m5/objects/AlphaTLB.py:
src/python/m5/objects/BadDevice.py:
src/python/m5/objects/BaseCPU.py:
src/python/m5/objects/BaseCache.py:
src/python/m5/objects/Bridge.py:
src/python/m5/objects/Bus.py:
src/python/m5/objects/CoherenceProtocol.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/DiskImage.py:
src/python/m5/objects/Ethernet.py:
src/python/m5/objects/Ide.py:
src/python/m5/objects/IntrControl.py:
src/python/m5/objects/MemObject.py:
src/python/m5/objects/MemTest.py:
src/python/m5/objects/Pci.py:
src/python/m5/objects/PhysicalMemory.py:
src/python/m5/objects/Platform.py:
src/python/m5/objects/Process.py:
src/python/m5/objects/Repl.py:
src/python/m5/objects/Root.py:
src/python/m5/objects/SimConsole.py:
src/python/m5/objects/SimpleDisk.py:
src/python/m5/objects/System.py:
src/python/m5/objects/Tsunami.py:
src/python/m5/objects/Uart.py:
Fix up imports (m5 namespace no longer includes m5.config).
src/sim/eventq.cc:
src/sim/eventq.hh:
Support for Python-called simulate() function:
- Use IsExitEvent flag to signal events that want
to exit the simulation loop gracefully (instead of
calling exit() to terminate the process).
- Modify interface to hand exit event object back to
caller so it can be inspected for cause.
src/sim/host.hh:
Add MaxTick constant.
src/sim/main.cc:
Move copyright notice back to C++ so we can print
it right away, even for interactive sessions.
Use PYTHONPATH environment var to set module path
(instead of clunky code injection method).
Move main control from here into Python:
- Separate initialization code and simulation loop
into separate functions callable from Python.
- Make Python interpreter invocation more pure (more
like directly invoking interpreter).
Add -i and -p flags (only options on binary itself;
other options processed by Python).
Import readline package when using interactive mode.
src/sim/sim_events.cc:
SimExitEvent is now SimLoopExitEvent, and uses
IsSimExit flag to terminate loop (instead of
exiting simulator process).
src/sim/sim_events.hh:
SimExitEvent is now SimLoopExitEvent, and uses
IsSimExit flag to terminate loop (instead of
exiting simulator process).
Get rid of a few unused constructors.
src/sim/sim_exit.hh:
SimExit() is now exitSimLoop().
Get rid of unused functions.
Add comments.
--HG--
extra : convert_revision : 280b0d671516b25545a6f24cefa64a68319ff3d4
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-release
--HG--
extra : convert_revision : 82b83199a36059d4b402f89f7db2de299ea59c1e
src/cpu/o3/lsq_unit_impl.hh:
Missed this name change.
src/cpu/thread_state.cc:
Fix for stats.
--HG--
extra : convert_revision : 50ea862f97f2fbc75c1c03d5700df1e8f2c0d122
use ThreadContext rename
src/arch/mips/isa/formats/branch.isa:
src/arch/mips/isa/formats/fp.isa:
src/arch/mips/isa/includes.isa:
Use ThreadContext
src/sim/syscall_emul.cc:
fcntl64 function using TC
src/sim/syscall_emul.hh:
Add fcntl64func
--HG--
extra : convert_revision : b5e2348530473704388b1c5a2b59bf78360260a9
src/cpu/o3/alpha_cpu.hh:
Remove functions no longer used for reading and writing.
--HG--
extra : convert_revision : aa2fde86ebad06a9a3a9628016b885ff546c0189
src/cpu/o3/lsq_unit.hh:
Handle being able to retry (untested but hopefully very close to working).
Handle lock flag for LL/SC hack. Hopefully the memory system will add in LL/SC soon.
Better output message.
src/cpu/o3/lsq_unit_impl.hh:
Handle being able to retry (untested but should be very close to working).
Make SC's work (hopefully) while the memory system doesn't have a LL/SC implementation.
--HG--
extra : convert_revision : bffa721b21405c88a9c6b3d9b9080957f8a2638f
implement ability for i/o devices to handle
src/dev/io_device.cc:
src/dev/io_device.hh:
implement ability for i/o devices to handle
src/mem/packet.hh:
add nacked result and a function to swizzle nacked packet into something that can be sent out again
--HG--
extra : convert_revision : fa42b01f4ab21562d37bd6bf6f4d7f69a94f0e86
when we get a virtual port delete it (even though delete does nothing in these cases)
src/arch/alpha/linux/system.cc:
src/arch/alpha/stacktrace.cc:
src/base/remote_gdb.cc:
src/cpu/simple_thread.cc:
when we get a virtual port delete it (even though delete does nothing in this case)
src/mem/port.hh:
src/mem/vport.hh:
add write/read functions that have endian conversions in them
--HG--
extra : convert_revision : 163e05cc038c461f95c92f8ce55422033f9ea513
src/cpu/o3/lsq_unit_impl.hh:
Tell checker that an instruction is completed prior once it does the access to memory.
--HG--
extra : convert_revision : 1d4bbac4b35fbd355f300eab76f29b38b5bc88cb
It still does not yet handle retries.
src/cpu/base_dyn_inst.hh:
Get working in full-system mode and fix some FP bugs.
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/thread_context.hh:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/thread_state.hh:
Get working in full system.
src/cpu/checker/o3_cpu_builder.cc:
Checker does not take a MemObject as a simobj parameter.
src/cpu/o3/alpha_dyn_inst.hh:
Fix up float regs.
src/cpu/o3/regfile.hh:
Fix up an fp error, print out more useful output messages.
--HG--
extra : convert_revision : d7cc152a051c697f18b7ee9e14050fbf3ffa5966
Following with the previous check-in, ExecContext now refers only to the interface provided to the ISA in order to access CPU state. ThreadContext refers to the interface provided to all objects outside the CPU in order to access thread state. SimpleThread provides all thread state and the interface to access it, and is suitable for simple execution models such as the SimpleCPU.
src/SConscript:
Include thread state file.
src/arch/alpha/ev5.cc:
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/thread_context.hh:
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/cpu/o3/cpu.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
Rename CPUExecContext to SimpleThread.
src/cpu/base_dyn_inst.hh:
Make thread member variables protected..
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/cpu.hh:
Make various members of ThreadState protected.
src/cpu/o3/alpha_cpu_impl.hh:
Push generation of TranslatingPort into the CPU itself.
Make various members of ThreadState protected.
src/cpu/o3/thread_state.hh:
Pull a lot of common code into the base ThreadState class.
src/cpu/ozone/thread_state.hh:
Rename CPUExecContext to SimpleThread, move a lot of common code into base ThreadState class.
src/cpu/thread_state.hh:
Push a lot of common code into base ThreadState class. This goes along with renaming CPUExecContext to SimpleThread, and making it derive from ThreadState.
src/cpu/simple_thread.cc:
Rename CPUExecContext to SimpleThread, make it derive from ThreadState. This helps push a lot of common code/state into a single class that can be used by all CPUs.
src/cpu/simple_thread.hh:
Rename CPUExecContext to SimpleThread, make it derive from ThreadState.
src/kern/system_events.cc:
Rename cpu_exec_context to thread_context.
src/sim/process.hh:
Remove unused forward declaration.
--HG--
rename : src/cpu/cpu_exec_context.cc => src/cpu/simple_thread.cc
rename : src/cpu/cpu_exec_context.hh => src/cpu/simple_thread.hh
extra : convert_revision : 2ed617aa80b64016cb9270f75352607cca032733
src/arch/alpha/regfile.hh:
Define clear functions on the individual reg files.
src/cpu/o3/regfile.hh:
Be sure to clear the misc reg file at startup.
--HG--
extra : convert_revision : 41e640887f0cf15d778c59a4dcd544d46899b527
src/cpu/o3/fetch_impl.hh:
Give the checker a pointer to the icachePort.
src/cpu/o3/lsq_unit_impl.hh:
Give the checker a pointer to the dcachePort.
src/mem/request.hh:
Allow checking for the scResult being valid prior to accessing it.
--HG--
extra : convert_revision : ced4180588d242111ecba4a11586823badd6cf15
src/cpu/base_dyn_inst.cc:
Delete the allocated data in destructor.
src/cpu/base_dyn_inst.hh:
Only copy the addresses if the translation succeeded.
src/cpu/o3/alpha_cpu.hh:
Return actual translating port.
Don't panic on setNextNPC() as it's always called, regardless of the architecture, when the process initializes.
src/cpu/o3/alpha_cpu_impl.hh:
Pass in memobject to the thread state in SE mode.
src/cpu/o3/commit_impl.hh:
Initialize all variables.
src/cpu/o3/decode_impl.hh:
Handle early resolution of branches properly.
src/cpu/o3/fetch.hh:
Switch structure back to requests.
src/cpu/o3/fetch_impl.hh:
Initialize all variables, create/delete requests properly.
src/cpu/o3/lsq_unit.hh:
Include sender state along with the packet. Also include a more generic writeback event that's only used for stores forwarding data to loads.
src/cpu/o3/lsq_unit_impl.hh:
Redo writeback code to support the response path of the memory system.
src/cpu/o3/mem_dep_unit.cc:
src/cpu/o3/mem_dep_unit_impl.hh:
Wrap variables in #ifdefs.
src/cpu/o3/store_set.cc:
Include to get panic() function.
src/cpu/o3/thread_state.hh:
Create with MemObject as well.
src/cpu/thread_state.hh:
Have a translating port in the thread state object.
src/python/m5/objects/AlphaFullCPU.py:
Mem parameter no longer needed.
--HG--
extra : convert_revision : a99381fb25cb183322882ce20935a6f3d1f2b64d
src/SConscript:
mem/request.cc no longer needed (all functions inline).
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/timing.cc:
src/dev/io_device.cc:
src/mem/port.cc:
Modified Request object interface.
src/mem/packet.hh:
Modified Request object interface.
Address & size are always set together now, so track
with single flag.
src/mem/request.hh:
Streamline interface to support a handful of calls that set
multiple fields reflecting common usage patterns.
Reduce number of validFoo booleans by combining flags for fields
which must be set together.
--HG--
extra : convert_revision : 3b499de90d6d5f12f0cc7a9a788663265677fe10
src/cpu/simple/atomic.cc:
Make common ifetch setup based on Request rather than Packet.
Packet::reset() no longer a separate function.
sendAtomic() returns latency, not absolute tick.
src/cpu/simple/atomic.hh:
sendAtomic returns latency, not absolute tick.
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
Make common ifetch setup based on Request rather than Packet.
src/dev/alpha_console.cc:
src/dev/ide_ctrl.cc:
src/dev/io_device.cc:
src/dev/isa_fake.cc:
src/dev/ns_gige.cc:
src/dev/pciconfigall.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/dev/tsunami_io.cc:
src/dev/tsunami_pchip.cc:
src/dev/uart8250.cc:
src/mem/physical.cc:
Get rid of redundant Packet time field.
src/mem/packet.cc:
Eliminate reset() method.
src/mem/packet.hh:
Fold reset() function into reinitFromRequest()... it was
only ever called together with that function.
Get rid of redundant time field.
Cleanup/add comments.
src/mem/port.hh:
Document in comment that sendAtomic returns latency, not absolute tick.
--HG--
extra : convert_revision : 0252f1a294043ca3ed58f437232ad24fc0733e0c
src/mem/port.hh:
Initialize peer port pointer to NULL.
Move private data members together.
--HG--
extra : convert_revision : dab01f81f0934758891a6b6dc2ad5328149d164b
is currently in /usr/local instead of /usr).
SConstruct:
Use information from the Python interpreter used to run scons
to find the version & paths for include & library files.
This means that linking with a different interpreter requires
invoking scons with that interpreter... add comment to that effect.
src/sim/main.cc:
Check return codes of Python interpreter calls for errors.
Get rid of include of obsolete header.
--HG--
extra : convert_revision : 90916bd8690fe1e6c9afdb0dfa1aa0d352a73a46
it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then
Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true)
Removed Port Blocked/Unblocked and replaced with sendRetry().
Remove possibility of packet mangling if packet is going to be refused anyway in bridge
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true)
src/dev/io_device.cc:
src/dev/io_device.hh:
Make DMA Timing requests/responses work.
Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true)
src/mem/bridge.cc:
src/mem/bridge.hh:
Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true)
Removed Port Blocked/Unblocked and replaced with sendRetry().
Remove posibility of packet mangling if packet is going to be refused anyway.
src/mem/bus.cc:
src/mem/bus.hh:
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since
it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then
src/mem/port.hh:
Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true)
Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method
--HG--
extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
Use embedded zip archive to carry Python code instead
of homegrown embedded string/file mechanism.
Do argument parsing in Python instead of C++.
SConstruct:
Add Python interpreter include path & library.
Define two new simple builders which copy &
concatenate files, respectively, for use by
the Python embedded zipfile code.
src/SConscript:
Encapsulate environment creation in a function.
Add code to append Python zip archive to final executable.
Eliminate references to obsolete files.
src/python/SConscript:
Rewrite to generate embedded zip archive of Python code
(replacing old "embedded string" mechanism).
src/python/m5/__init__.py:
Move main arg-parsing loop here (out of C++ main()).
src/python/m5/config.py:
Minor fix (version incompatibility?).
src/sim/main.cc:
Invoke embedded Python interpreter to parse args
and generate config.ini, replacing C++ arg parsing code.
--HG--
extra : convert_revision : 72d21236b2bee139ff39ba4cf031a4a1f8560029
src/SConscript:
src/arch/sparc/SConscript:
commit a couple of things that I forgot to last time.
--HG--
extra : convert_revision : f140912905b9d36eccc27e35ebcaf2c15611b56b
so the events can be migrated on cpu switches.
Create a new wrapper classe called CpuEventWrapper that works like the old wrapper class but calls the function with the xc
parameter
Use new CpuEventWrapper class from tick compare events on sparc
src/arch/sparc/regfile.hh:
Use new CpuEventWrapper class from tick compare events
src/arch/sparc/ua2005.cc:
Move definition to to a fullsystem only file, since it is.
src/cpu/base.cc:
On switch from one cpu to another CpuEvent::replaceExecContext() needs to be called on all (oldxc,newxc) pairs.
--HG--
extra : convert_revision : eecf4540427cc0ddf75e19a3371cf32b56cba0f5
setup all initialization stuff for UA2005
Setup fullsys build options
Start to make fullsystem compile
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
RCS to BitKeeper
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Add support for doing virtual to physical translation using the in-memory
page table
src/arch/sparc/vtophys.cc:
a tad bit of error checking
src/arch/sparc/vtophys.hh:
Cleanup of full-system global variables, primarily in simple_cpu.cc,
to allow multi-system simulations. (Multiple systems not yet yested
though.) Also changes to build sim_smt in full-system mode (though
with only SimpleCPU and not the full timing CPU for now).
Still to do: minimize changes in SimpleCPU code between full-system
and application modes... way too many ifdefs there. Much of the
full-system stuff moved into SimpleCPU should be put in a new System
object to allow multiprocessor simulations.
Converted last remaining modules from C to C++ (mostly in /old).
Renamed all .c files to .cc and a few .h files to .hh.
Renamed architecture-specific files in arch/$TARGET from
$TARGET.{cc,hh,def} to machine.{cc,hh,def} to get rid of pointless
intermediate files in object directory. Split exo-specific
definitions out of machine.hh into machine_exo.h.
Specifics:
In machine.def, null resource descriptors must be FUClamd_NA (and not
NA) to pass C++ type checking.
Enhanced error checking/reporting in bas
src/arch/sparc/vtophys.cc:
- Get rid of my String class, the Vector class, the bitvector class, and my
doubly linked list class.
- Convert tokenize, to_number (formerly StringToNumber) and eat_white to
function on stl strings.
- Change most cases of char * and const char * to string, or const string &
- Some formatting and style nits, but not too many.
src/arch/sparc/vtophys.cc:
simplify
src/arch/sparc/vtophys.cc:
Renamed SimpleCPU::(read|write)_(byte|half|word|qword) to just read &
write, overloaded on the type of the 'data' argument. Merged the
full-system and non-full-system implementations of these eight
original functions into two common template functions.
To support this, also renamed (read|write)[1248] on memory_object and
derivatives to just read & write, again overloaded on the type of the
'data' argument. Many of these functions could now be condensed into
a few template functions (though with a level of indirection so that
the interface can remain virtual). I did not do that though.
src/arch/sparc/vtophys.cc:
First pass at compiling with gcc 3.x. Lots of "std::" in header files,
"using namespace std" in source files. (Note policy of not putting "using"
statements in headers or before includes in sources.)
Still not able to compile with gcc 3.2.
Errors:
- Can't create an ifstream from a file descriptor anymore (breaks IniFile).
- "`class MSHR::MSHRegister' is private" errors in mshr.cc and prefetch_cache.cc:
not clear why since it's in the public part of the class declaration.
- cpu.cc:879: can't match a reference and 0 (specifically "no match for `bool ?
SimObjectParam<PipeTrace*>& : int' operator")
- pipetrace.cc: "invalid conversion from `int' to `std::_Ios_Fmtflags'"
Warnings:
- strstream now deprecated... needs some rewriting in sat_counter.hh
and hybrid_pred.hh (need to get all that code out of the headers anyway)
- trace.hh macro problem: cpp now says 'pasting "::" and "Event" does not
give a valid preprocessing token'
- major "implicit typename" issues in base/sized.hh
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Implement some interval statistics for full system mode.
Create a callpal function that is called when a callpal occurs so it's easier
to manipulate the statics.
Rework the vtophys stuff to make it a bit cleaner.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Get rid of almost all old-style object names. This commit is equivalent
to running the following script on the current head:
#! /bin/sh
find \( -name '*.cc' -o -name '*.hh' \) -exec perl -pi -e '\
s/\bmemory_object\b(?!\.hh)/FunctionalMemory/g;\
s/\bvirtual_memory\b(?!\.hh)/VirtualMemory/g;\
s/\bmain_memory\b(?!\.hh)/MainMemory/g;\
s/\bphysical_memory\b(?!\.hh)/PhysicalMemory/g;\
s/\bspec_memory\b(?!\.hh)/SpeculativeMemory/g;\
s/\bMemObj\b(?!\.hh)/TimingMemObj/g;\
s/\bmemory_translation\b(?!\.hh)/AddressTranslator/g;\
s/\balpha_tlb\b(?!\.hh)/AlphaTlb/g;\
s/\balpha_itb\b(?!\.hh)/AlphaItb/g;\
s/\balpha_dtb\b(?!\.hh)/AlphaDtb/g;\
s/\bmemory_controller\b(?!\.hh)/MemoryController/g;\
s/\bstorebuffer_t\b(?!\.hh)/StoreBuffer/g;\
s/\bstorebuffer_entry_t\b(?!\.hh)/StoreBufferEntry/g;\
s/\bcreate_vector_t\b(?!\.hh)/CreateVector/g;\
s/\bcv_spec_state\b(?!\.hh)/CreateVecSpecState/g;\
s/\bspec_state_list\b(?!\.hh)/SpecStateList/g;\
s/\bdyn_inst_t\b(?!\.hh)/DynInst/g;' {} \;
src/arch/sparc/vtophys.cc:
since cprintf properly deals with 64-bit types, stop using FMT* as much as
possible
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Change byte_t etc. to C99 standard int8_t etc.
Other than old/host.h, all other changes were produced by this script:
#! /bin/sh
find \( -name '*.cc' -o -name '*.hh' -o -name '*.c' -o -name '*.h' -o -name 'machine.def' \) -exec perl -pi -e '\
s/\bbyte_t\b(?!\.hh)/uint8_t/g;\
s/\bsbyte_t\b(?!\.hh)/int8_t/g;\
s/\bhalf_t\b(?!\.hh)/uint16_t/g;\
s/\bshalf_t\b(?!\.hh)/int16_t/g;\
s/\bword_t\b(?!\.hh)/uint32_t/g;\
s/\bsword_t\b(?!\.hh)/int32_t/g;\
s/\bqword_t\b(?!\.hh)/uint64_t/g;\
s/\bsqword_t\b(?!\.hh)/int64_t/g;\
s/\bbool_t\b(?!\.hh)/bool/g;\
s/\bdfloat_t\b(?!\.hh)/double/g;\
s/\bsfloat_t\b(?!\.hh)/float/g;' {} \;
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Add CVS Id tags
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Massive renaming to (almost) eliminate all md_* and MD_* names
in preparation for total exorcism of machine.def.
Most of the changes in this commit were performed with the
following perl script (perl -pi <script> <files>). A small
amount of manual fixup was needed to (mostly getting rid of
the Addr typedefs in the various memory objects now that
the former md_addr_t has that name).
# rename machine-dependent types and constants (will be moving into ISA traits object)
s/md_addr_t/Addr/g;
s/md_intreg_t/IntReg/g;
s/md_gpr_t/IntRegFile/g;
s/md_fpreg_t/FloatReg/g;
s/md_fpr_t/FloatRegFile/g;
s/md_ctrlreg_t/MiscReg/g;
s/md_ctrl_t/MiscRegFile/g;
s/md_ipr_t/InternalProcReg/g;
s/md_anyreg_t/AnyReg/g;
s/md_inst_t/MachInst/g;
s/regs_t/RegFile/g;
# manually fix declaration in old/regs.h and a few forward decls
s/struct RegFile/RegFile/g;
s/MD_NUM_IREGS/NumIntRegs/g;
s/MD_NUM_FREGS/NumFloatRegs/g;
s/MD_NUM_CREGS/NumMiscRegs/g;
s/MD_IPR_NUM/NumInternalProcRegs/g;
s/MD_TOTAL_REGS/TotalNumRegs/g;
s/MD_REG_ZERO/ZeroReg/g;
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
New ISA description system. No more machine.def!
Instructions are now decoded into StaticInst objects, and all static
instruction properties (including execution behavior) are associated
with those objects. Extended documentation in progress.
Currently supports Alpha only; PISA will not compile.
Use END_OF_MACHINE_DOT_DEF tag to extract previous version.
src/arch/sparc/vtophys.cc:
get rid of MD_IPR_foo and call it IPR_foo
add some comments to describe what the various PALtemp registers do
formatting
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
license
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
a little style
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Add attribution to license.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Make include paths explicit.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
CopyData and CopyString moved from kernel.cc to vtophys.cc
kernel.cc and kernel.hh moved to kern/tru64
src/arch/sparc/vtophys.hh:
Include isa_traits.hh for Addr
src/arch/sparc/vtophys.cc:
formatting fixes
src/arch/sparc/vtophys.cc:
fix up vtophys to deal with translations if there
is no ptbr, and to deal with PAL addresses
add ptomem which is just a wrapper for dma_addr
src/arch/sparc/vtophys.hh:
add ptomem which is a wrapper for dma_addr with the
same usage as vtomem
src/arch/sparc/vtophys.cc:
Fix to remote debugger while in PAL code
src/arch/sparc/vtophys.cc:
Remote an old hack that is now unnecessary
src/arch/sparc/vtophys.cc:
Removed buggy code that tries to fix PAL addresses (may cause problems
while trying to debug in PAL code, but that should do this fix outside
of vtophys)
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Updated Copyright
src/arch/sparc/vtophys.cc:
added back some code andrew removed and couldn't remember why.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
rename CopyData to CopyOut and implement CopyIn to copy data
from the simulator into the simulatee
src/arch/sparc/vtophys.cc:
fixed a bad merge from linux<->tru64
src/arch/sparc/vtophys.cc:
Check max address pal can be at so we don't do the wrong conversion
if gdb asks for an unaligned access.
src/arch/sparc/vtophys.cc:
PGOFSET -> ALPHA_PGOFSET to avoid include file problems
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
in the arch/alpha directory we should use arch/alpha, not
targetarch. sort includes while we're here.
src/arch/sparc/vtophys.cc:
use new constants, functions and structs to clean up the
vtophys code.
src/arch/sparc/vtophys.hh:
Clean up a little bit and make the protypes match new changes.
src/arch/sparc/vtophys.cc:
deal with isa addition
src/arch/sparc/vtophys.cc:
shuffle files around for new directory structure
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Remove RCS Id string
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Update copyright dates and author list
src/arch/sparc/vtophys.cc:
Added a using directive for AlphaISA
src/arch/sparc/vtophys.hh:
Added the AlphaISA namespace specifier where needed
src/arch/sparc/vtophys.hh:
Made Addr a global type
src/arch/sparc/vtophys.cc:
Change access to the IPR to go through the XC.
src/arch/sparc/vtophys.cc:
Avoid directly accessing objects within the XC.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
fixed for new memory system
put in namespace AlphaISA
src/arch/alpha/vtophys.cc:
src/arch/alpha/vtophys.hh:
Remove authors from copyright.
src/arch/sparc/vtophys.cc:
bk cp alpha/vtophys.cc sparc/vtophys.cc
src/arch/sparc/vtophys.hh:
bk cp alpha/vtophys.hh sparc/vtophys.hh
src/arch/sparc/SConscript:
remove fullsystem files that don't exist
src/arch/sparc/isa_traits.hh:
split off fullsystem and se iprs into two functions to remove lots of #ifs
src/arch/sparc/regfile.hh:
split off fullsystem and se iprs into two functions to remove lots of #ifs
setup all initialization stuff for UA2005
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
Add system level tick storage to make stick be syncronized across multiple processors
src/arch/sparc/vtophys.hh:
start to create a vtophys for Sparc
src/base/loader/symtab.hh:
Addr is defined in sim/host.hh
--HG--
extra : convert_revision : ae4658e6bc2e2b51d7fb1c711d069ffe99e1377d
Rip out storage in miscreg file that will never store anything
Add storage and defines for Priv and Hyperpriv registers
Change defines to match the spec register numbers
Change the way misc registers are named to match the spec with offsets to deal with ASR/PR/HPR/FSR.
Change contextval to an int since both global registers and windowed registers are indexed by int in UA2005.
Use bitfields for things that are rarely used in decoder
Instead of decoding ASR/PR/HPR and having a specfic instruction, use a generic instruction instead
Still todo:
Protect rdpr, rdhpr, wrpr, wrhpr with checks that fault in insufficient privs
Deal with signaling interrupts on timer expiration
Deal with writes to softint/PIL generating interrupts how those are vectored to the CPU
Other misc:
Instruction decoding needs major help!
src/arch/sparc/isa/decoder.isa:
Remove tons of MISCREG_XXXX defines that weren't used and ControlRegs in that were never used. Ones that were used rarely
changed to bitfields.
src/arch/sparc/isa/formats/integerop.isa:
These seems like a whole lot of overkill in printing, but i'll leave it the way it is for now. Allow Ccr to be set
at once
src/arch/sparc/isa/formats/priv.isa:
PrivTick is handled by miscreg now, don't need a seperate class for it
src/arch/sparc/isa/operands.isa:
prune the number of control regs down to a reasonable amount
src/arch/sparc/isa_traits.hh:
Replace 8 defines with 1 and flick some bits
src/arch/sparc/process.cc:
Better to clean the entire registers that specific bits which leads to indetermanistic behavior.
src/arch/sparc/regfile.hh:
Rip out storage that will never be backed by anything
Add storage for Priv and Hyperpriv registers
change defines to match the spec
change the way misc registers are named to match the spec with offsets to deal with ASR/PR/HPR/FSR.
change contextval to an int since both global registers and windowed registers are indexed by int in UA2005.
--HG--
extra : convert_revision : 64276a3ea884eea70112e721f85a515946ded4c2
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
Move traceData->finalize() into postExecute().
src/cpu/simple/timing.cc:
Fixes for full system. Now boots Alpha Linux!
- Handle ifetch faults, suspend/resume.
- Delete memory request & packet objects on response.
- Don't try to do split memory accesses on prefetch references
(ISA description doesn't support this).
src/cpu/simple/timing.hh:
Minor reorganization of internal methods.
--HG--
extra : convert_revision : 59e3ee5e4cb53c424ebdbe2e504d97e88c08a978
Store original source & senderState for timing packets
that get a response, so we can properly route the
response packet back to the original sender.
--HG--
extra : convert_revision : 03dbcc8dc06d93de243bfcdc3cbaa012773c6782
src/base/traceflags.py:
Sort flags so you can find things.
Add BusAddrRanges flag for tracking RangeChange events
separately from general bus activity.
src/mem/bus.cc:
Add BusAddrRanges flag for tracking RangeChange events
separately from general bus activity.
src/mem/port.cc:
src/mem/port.hh:
Print Config trace message when peers are set up.
--HG--
extra : convert_revision : d7c11d5f90c8de5c8d97e473501a268a567e9e44
- new constructor guarantees initialization of most fields
- flags track status of non-guaranteed fields (addr, size, src)
- accessor functions (getAddr() etc.) check status on access
- Command & Result classes are nested in Packet class scope
- Command now built from vector of behavior bits
- string version of Command for tracing
- reinitFromRequest() and makeTimingResponse() encapsulate
common manipulations of existing packets
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/timing.cc:
src/dev/alpha_console.cc:
src/dev/ide_ctrl.cc:
src/dev/io_device.cc:
src/dev/io_device.hh:
src/dev/isa_fake.cc:
src/dev/ns_gige.cc:
src/dev/pciconfigall.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/dev/tsunami_io.cc:
src/dev/tsunami_pchip.cc:
src/dev/uart8250.cc:
src/mem/bus.cc:
src/mem/bus.hh:
src/mem/physical.cc:
src/mem/port.cc:
src/mem/port.hh:
src/mem/request.hh:
Update for new Packet interface.
--HG--
extra : convert_revision : 9973d09ea4fa61795f23772a7d3995fa4df5c269
Need to rewrite bus bridge to get any further.
src/dev/io_device.cc:
Set packet dest on timing responses.
src/mem/bus.cc:
Fix dest addr bounds check assertion.
Add assertion to catch infinite loopbacks.
src/mem/physical.cc:
Add comment.
--HG--
extra : convert_revision : 419b65a3a61e2d099884dbda117b338dffd80896
It doesn't compile, and if we really want this we should
start over from scratch and see if we can reuse parts from
BaseSimpleCPU (e.g., derive a FastSimpleCPU).
SConstruct:
src/arch/SConscript:
src/cpu/cpu_models.py:
Get rid of FastCPU model.
--HG--
extra : convert_revision : f3f0362f7292bf21e8e0d4d84c475be8a9789a0c
src/arch/sparc/isa/formats/nop.isa:
Fix nop header so we can compile with multiple CPU models.
(Former code re-defined Nop object for each model.)
--HG--
extra : convert_revision : 04e92622edf4dfefd9e149a17f604e17a93707c9
SConstruct:
Clean up libelf handling. Required better handling of
per-build-root stuff in general (though libelf is the
only thing in that category currently).
src/SConscript:
No libelf-specific stuff in here anymore.
src/base/loader/elf_object.cc:
Just need to include gelf.h... it includes libelf.h.
--HG--
extra : convert_revision : 3d6bdcf8233bda0ac8d08ff777de323df8aa45ae
