Commit graph

508 commits

Author SHA1 Message Date
Ali Saidi
73e9e923d0 stats: Update stats for syscall emulation Linux kernel changes. 2012-08-15 10:38:05 -04:00
Ali Saidi
6a70ef30a3 stats: revert pc-simple-timing-ruby-MESI_CMP_directory to before last update 2012-07-30 12:11:25 -04:00
Ali Saidi
19cc023cf5 stats: fix some miss-committed changes from the icache change 2012-07-28 13:48:04 -04:00
Ali Saidi
b1a58933e0 stats: update stats for icache change not allowing dirty data 2012-07-27 16:08:05 -04:00
Steve Reinhardt
42596d27e9 test: Update eio ref outputs due to recent changes
Actual stats updates covering period since original ref outputs
were clobbered.
2012-07-23 00:39:12 -04:00
Steve Reinhardt
882a4b65bd test: Restore eio ref files clobbered in rev 8800b05e1cb3.
Apparently Nate did a wholesale update of stats files using
a binary compiled without eio, resulting in broken refernce
outputs.
2012-07-23 00:33:05 -04:00
Nilay Vaish
2590a7dd0a Regression: Update stats due to changes to x86 cpuid instruction 2012-07-22 20:31:24 -05:00
Andreas Hansson
5e7f174b74 Regression: Fix topologies path in failing pc-simple-timing-ruby
This patch updates the path to the Ruby topologies and thus fixes a
failing regression.
2012-07-21 17:24:01 -04:00
Andreas Hansson
f00cba34eb Mem: Make SimpleMemory single ported
This patch changes the simple memory to have a single slave port
rather than a vector port. The simple memory makes no attempts at
modelling the contention between multiple ports, and any such
multiplexing and demultiplexing could be done in a bus (or crossbar)
outside the memory controller. This scenario also matches with the
ongoing work on a SimpleDRAM model, which will be a single-ported
single-channel controller that can be used in conjunction with a bus
(or crossbar) to create a multi-port multi-channel controller.

There are only very few regressions that make use of the vector port,
and these are all for functional accesses only. To facilitate these
cases, memtest and memtest-ruby have been updated to also have a
"functional" bus to perform the (de)multiplexing of the functional
memory accesses.
2012-07-12 12:56:13 -04:00
Nilay Vaish
019ced8d85 Regression: update ruby.stats file 2012-07-12 08:39:20 -05:00
Brad Beckmann
b00fe08cc9 regress: ruby stat additions and config changes 2012-07-10 22:51:55 -07:00
Andreas Hansson
fda338f8d3 Stats: Updates due to bus changes
This patch bumps all the stats to reflect the bus changes, i.e. the
introduction of the state variable, the division into a request and
response layer, and the new default bus width of 8 bytes.
2012-07-09 12:35:41 -04:00
Ali Saidi
3965ecc36b Stats: Update stats for RAS and LRU fixes. 2012-06-29 11:19:03 -04:00
Marc Orr
02f8178b44 Regression: Fix some bugs in simple-timing-mp-ruby.py. 2012-06-11 03:16:43 -04:00
Ali Saidi
c49e739352 all: Update stats for memory per master and total fix. 2012-06-05 01:23:16 -04:00
Gabe Black
6437f3f4ee X86: Update stats for the CPUID change. 2012-06-04 10:43:11 -07:00
Andreas Hansson
0d32940711 Bus: Split the bus into a non-coherent and coherent bus
This patch introduces a class hierarchy of buses, a non-coherent one,
and a coherent one, splitting the existing bus functionality. By doing
so it also enables further specialisation of the two types of buses.

A non-coherent bus connects a number of non-snooping masters and
slaves, and routes the request and response packets based on the
address. The request packets issued by the master connected to a
non-coherent bus could still snoop in caches attached to a coherent
bus, as is the case with the I/O bus and memory bus in most system
configurations. No snoops will, however, reach any master on the
non-coherent bus itself. The non-coherent bus can be used as a
template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses,
and is typically used for the I/O buses.

A coherent bus connects a number of (potentially) snooping masters and
slaves, and routes the request and response packets based on the
address, and also forwards all requests to the snoopers and deals with
the snoop responses. The coherent bus can be used as a template for
modelling QPI, HyperTransport, ACE and coherent OCP buses, and is
typically used for the L1-to-L2 buses and as the main system
interconnect.

The configuration scripts are updated to use a NoncoherentBus for all
peripheral and I/O buses.

A bit of minor tidying up has also been done.

--HG--
rename : src/mem/bus.cc => src/mem/coherent_bus.cc
rename : src/mem/bus.hh => src/mem/coherent_bus.hh
rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc
rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-31 13:30:04 -04:00
Andreas Hansson
fb9bfb9cfc Stats: Fix stats to match output after changeset 8800b05e1cb3
This patch updates the stats for parser to be aligned with the most
up-to-date behaviour. Somehow the wrong results got committed as part
of 8800b05e1cb3 (see details below) when fixing the no_value -> nan
stats.

changeset:   8983:8800b05e1cb3
user:        Nathan Binkert <nate@binkert.org>
summary:     stats: update stats for no_value -> nan
2012-05-09 11:52:14 -07:00
Gabe Black
f91b06e20e X86: Add a 32 bit hello world test binary. 2012-05-27 19:01:09 -07:00
Nilay Vaish
0bff8eb210 X86 Regression: update stats due to cc register split 2012-05-22 11:38:04 -05:00
Ali Saidi
e62beaaa8f ARM: update stats for clock frequency fix. 2012-05-10 18:04:29 -05:00
Nathan Binkert
4a644767c5 stats: update stats for no_value -> nan
Lots of accumulated older changes too.
2012-05-09 11:52:14 -07:00
Nilay Vaish
e8f56bdf45 Regression: Move x86 fs ruby simulation from quick to long
--HG--
rename : tests/quick/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/config.ini => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/config.ini
rename : tests/quick/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/ruby.stats
rename : tests/quick/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/simerr => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/simerr
rename : tests/quick/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/simout => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/simout
rename : tests/quick/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/stats.txt
rename : tests/quick/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/system.pc.com_1.terminal => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/system.pc.com_1.terminal
2012-05-03 23:18:13 -05:00
Nilay Vaish
8966e6d36d Regression: Stats update for X86 Ruby FS test
The kernel originally used to generate the stats is different from the one
at use on zizzer. This patch updates the stats with the correct kernel in
use.
2012-04-30 03:47:22 -05:00
Nilay Vaish
86f248e2a7 Regression: Add a test for x86 timing full system ruby simulation 2012-04-25 22:43:36 -05:00
Gabe Black
312b6fe43b X86: Update stats for the slightly changed TLB behavior. 2012-04-24 00:48:57 -07:00
Andreas Hansson
b9bc530ad2 Regression: Add ANSI colours to highlight test status
This patch adds a very basic pretty-printing of the test status
(passed or failed) to highlight failing tests even more: green for
passed, and red for failed. The printing only uses ANSI it the target
output is a tty and supports ANSI colours. Hence, any regression
scripts that are outputting to files or sending e-mails etc should
still be fine.
2012-04-14 05:44:27 -04:00
Andreas Hansson
4bd61abb51 Stats: Update with use of std::map for ordered iteration in Ruby
This patch updates the stats to reflect the changes due to the use of
std::map instead of the hash map order-dependent iteration in Ruby.
2012-04-12 08:35:56 -04:00
Brad Beckmann
697fd8987b regress: ruby random tester and hammer stats updates 2012-04-06 16:16:24 -07:00
Brad Beckmann
f050ebe3a8 MOESI_hammer: fixed bug with single cpu + flushes, then modified the regression tester to check this functionality 2012-04-06 13:47:06 -07:00
Andreas Hansson
b00949d88b MEM: Enable multiple distributed generalized memories
This patch removes the assumption on having on single instance of
PhysicalMemory, and enables a distributed memory where the individual
memories in the system are each responsible for a single contiguous
address range.

All memories inherit from an AbstractMemory that encompasses the basic
behaviuor of a random access memory, and provides untimed access
methods. What was previously called PhysicalMemory is now
SimpleMemory, and a subclass of AbstractMemory. All future types of
memory controllers should inherit from AbstractMemory.

To enable e.g. the atomic CPU and RubyPort to access the now
distributed memory, the system has a wrapper class, called
PhysicalMemory that is aware of all the memories in the system and
their associated address ranges. This class thus acts as an
infinitely-fast bus and performs address decoding for these "shortcut"
accesses. Each memory can specify that it should not be part of the
global address map (used e.g. by the functional memories by some
testers). Moreover, each memory can be configured to be reported to
the OS configuration table, useful for populating ATAG structures, and
any potential ACPI tables.

Checkpointing support currently assumes that all memories have the
same size and organisation when creating and resuming from the
checkpoint. A future patch will enable a more flexible
re-organisation.

--HG--
rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py
rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py
rename : src/mem/physical.cc => src/mem/abstract_mem.cc
rename : src/mem/physical.hh => src/mem/abstract_mem.hh
rename : src/mem/physical.cc => src/mem/simple_mem.cc
rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-06 13:46:31 -04:00
Nilay Vaish
390cfc7be9 Config: Change the way options are added
I am not too happy with the way options are added in files se.py and fs.py
currently. This patch moves all the options to the file Options.py, functions
from which are called when required.
2012-03-28 11:01:53 -05:00
Ali Saidi
3c666083c6 ARM: Update stats for IT and conditional branch changes 2012-03-21 10:36:45 -05:00
Ali Saidi
470051345a ARM: Update stats for CBNZ fix. 2012-03-09 15:33:07 -05:00
Ali Saidi
927bba9d60 ARM: Update stats for valgrind fix and replace config.inis which are out of date. 2012-03-09 09:59:29 -05:00
Geoffrey Blake
da0d67c3d6 CheckerCPU: Make some basic regression tests for CheckerCPU
Adds regression tests for the CheckerCPU. ARM ISA support
only at this point.
2012-03-09 09:59:28 -05:00
Ali Saidi
eaa994e7f6 cache: Allow main memory to be at disjoint address ranges. 2012-03-09 09:59:25 -05:00
Gabe Black
cda4c2d280 Fix the SPARC fs regression by adding a call to createInterruptController. 2012-03-08 02:10:03 -08:00
Andreas Hansson
75681d3c1b Stats: Update stats for changeset 8868
Changeset 8868 slightly changes the statistics for the parser and
bzip2 regressions for ARM o3-timing. This patch merely updates the
statistics to reflect these changes.
2012-03-06 11:14:54 -05:00
Andreas Hansson
32eae8094d CPU: Check that the interrupt controller is created when needed
This patch adds a creation-time check to the CPU to ensure that the
interrupt controller is created for the cases where it is needed,
i.e. if the CPU is not being switched in later and not a checker CPU.

The patch also adds the "createInterruptController" call to a number
of the regression scripts.
2012-03-02 09:21:48 -05:00
Andreas Hansson
c0b9f324bf Stats: Fix the realview regression stats after nvmem move
This patch updates the realview regressions stats to reflect that nvmem
moved in the object hierarchy and is now under system.realview.
2012-03-02 09:18:50 -05:00
Steve Reinhardt
13e14ba93c EIO: update stats (mostly order change, some renames) 2012-02-29 01:51:39 -05:00
Andreas Hansson
ac91f90145 Script: Fix the scripts that use the num_cpus cache parameter
This patch merely removes the use of the num_cpus cache parameter
which no longer exists after the introduction of the masterIds. The
affected scripts fail when trying to set the parameter. Note that this
patch does not update the regression stats.
2012-02-14 12:11:18 -05:00
Ali Saidi
0d46708dc2 bp: fix up stats for changes to branch predictor 2012-02-13 12:30:30 -06:00
Andreas Hansson
5a9a743cfc MEM: Introduce the master/slave port roles in the Python classes
This patch classifies all ports in Python as either Master or Slave
and enforces a binding of master to slave. Conceptually, a master (such
as a CPU or DMA port) issues requests, and receives responses, and
conversely, a slave (such as a memory or a PIO device) receives
requests and sends back responses. Currently there is no
differentiation between coherent and non-coherent masters and slaves.

The classification as master/slave also involves splitting the dual
role port of the bus into a master and slave port and updating all the
system assembly scripts to use the appropriate port. Similarly, the
interrupt devices have to have their int_port split into a master and
slave port. The intdev and its children have minimal changes to
facilitate the extra port.

Note that this patch does not enforce any port typing in the C++
world, it merely ensures that the Python objects have a notion of the
port roles and are connected in an appropriate manner. This check is
carried when two ports are connected, e.g. bus.master =
memory.port. The following patches will make use of the
classifications and specialise the C++ ports into masters and slaves.
2012-02-13 06:43:09 -05:00
Ali Saidi
8cb4a2208d tests: fix diff-out script for op/inst stat changes. 2012-02-12 18:35:59 -06:00
Ali Saidi
4f8d1a4cef stats: update stats for insts/ops and master id changes 2012-02-12 16:07:43 -06:00
Dam Sunwoo
230540e655 mem: fix cache stats to use request ids correctly
This patch fixes the cache stats to use the new request ids.
Cache stats also display the requestor names in the vector subnames.
Most cache stats now include "nozero" and "nonan" flags to reduce the
amount of excessive cache stat dump. Also, simplified
incMissCount()/incHitCount() functions.
2012-02-12 16:07:39 -06:00
Nilay Vaish
b7cf64398f Regressions: Update stats due to change in MESI protocol 2012-02-12 13:22:04 -06:00
Nilay Vaish
26ca8b8747 Regressions: Update stats due to O3 CPU changes 2012-02-10 09:51:37 -06:00