The underlying assumption that all PPIs must be edge-triggered is
strained when the architected timers and VGIC interfaces make
level-behaviour observable. For example, a virtual timer interrupt
'goes away' when the hypervisor is entered and the vtimer is disabled;
this requires a PPI to be de-activated.
The new method simply clears the interrupt pending state.
The ethernet address param tries to convert a hexadecimal
string using int() in python, which defaults to base 10,
need to specify base 16 in this case.
SimObjects are expected to only generate one port reference per
port belonging to them. There is a subtle bug with using "not"
here as a VectorPort is seen as not having a reference if it is
either None or empty as per Python docs sec 9.9 for Standard operators.
Intended behavior is to only check if we have not created the reference.
There is an option to enable/disable all framebuffer dumps, but the
last frame always gets dumped in the run folder with no other way to
disable it. These files can add up very quickly running many experiments.
This patch adds an option to disable them. The default behavior
remains unchanged.
LSQSenderState represents the LQ/SQ index using uint8_t, which supports up to
256 entries (including the sentinel entry). Sending packets to memory with a
higher index than 255 truncates the index, such that the response matches the
wrong entry. For instance, this can result in a deadlock if a store completion
does not clear the head entry.
This change fixes an issue in the O3 CPU where an uncachable instruction
is attempted to be executed before it reaches the head of the ROB. It is
determined to be uncacheable, and is replayed, but a PanicFault is attached
to the instruction to make sure that it is properly executed before
committing. If the TLB entry it was using is replaced in the interveaning
time, the TLB returns a delayed translation when the load is replayed at
the head of the ROB, however the LSQ code can't differntiate between the
old fault and the new one. If the translation isn't complete it can't
be faulting, so clear the fault.
This patch changes the ProtoBuf builder such that the generated source
and header is placed in the build directory of the proto file. This
was previously not the case for the directories included as EXTRAS. To
make this work, we also ensure that the build directory for the EXTRAS
are added to the include path (which does not seem to automatically be
the case).
When handling IPR accesses in doMMIOAccess, the KVM CPU used
clockEdge() to convert between cycles and ticks. This is incorrect
since doMMIOAccess is supposed to return a latency in ticks rather
than when the access is done. This changeset fixes this issue by
returning clockPeriod() * ipr_delay instead.
Get rid of non-deterministic "stats" in ruby.stats output
such as time & date of run, elapsed & CPU time used,
and memory usage. These values cause spurious
miscomparisons when looking at output diffs (though
they don't affect regressions, since the regressions
pass/fail status currently ignores ruby.stats entirely).
Most of this information is already captured in other
places (time & date in stdout, elapsed time & mem usage
in stats.txt), where the regression script is smart
enough to filter it out. It seems easier to get rid of
the redundant output rather than teaching the
regression tester to ignore the same information in
two different places.
Convert condition code registers from being specialized
("pseudo") integer registers to using the recently
added CC register class.
Nilay Vaish also contributed to this patch.
Restructured rename map and free list to clean up some
extraneous code and separate out common code that can
be reused across different register classes (int and fp
at this point). Both components now consist of a set
of Simple* objects that are stand-alone rename map &
free list for each class, plus a Unified* object that
presents a unified interface across all register
classes and then redirects accesses to the appropriate
Simple* object as needed.
Moved free list initialization to PhysRegFile to better
isolate knowledge of physical register index mappings
to that class (and remove the need to pass a number
of parameters to the free list constructor).
Causes a small change to these stats:
cpu.rename.int_rename_lookups
cpu.rename.fp_rename_lookups
because they are now categorized on a per-operand basis
rather than a per-instruction basis.
That is, an instruction with mixed fp/int/misc operand
types will have each operand categorized independently,
where previously the lookup was categorized based on
the instruction type.
Make these names more meaningful.
Specifically, made these substitutions:
s/FP_Base_DepTag/FP_Reg_Base/g;
s/Ctrl_Base_DepTag/Misc_Reg_Base/g;
s/Max_DepTag/Max_Reg_Index/g;
Clean up and add some consistency to the *_Base_DepTag
constants as well as some related register constants:
- Get rid of NumMiscArchRegs, TotalArchRegs, and TotalDataRegs
since they're never used and not always defined
- Set FP_Base_DepTag = NumIntRegs when possible (i.e.,
every case except x86)
- Set Ctrl_Base_DepTag = FP_Base_DepTag + NumFloatRegs
(this was true before, but wasn't always expressed
that way)
- Drastically reduce the number of arbitrary constants
appearing in these calculations
It had a bunch of fields (and associated constructor
parameters) thet it didn't really use, and the array
initialization was needlessly verbose.
Also just hardwired the getReg() method to aleays
return true for misc regs, rather than having an array
of bits that we always kept marked as ready.
No need for PhysRegFile to be a template class, or
have a pointer back to the CPU. Also made some methods
for checking the physical register type (int vs. float)
based on the phys reg index, which will come in handy later.
The previous patch introduced a RegClass enum to clean
up register classification. The inorder model already
had an equivalent enum (RegType) that was used internally.
This patch replaces RegType with RegClass to get rid
of the now-redundant code.
Move from a poorly documented scheme where the mapping
of unified architectural register indices to register
classes is hardcoded all over to one where there's an
enum for the register classes and a function that
encapsulates the mapping.
ASI_BITS in the Request object were originally used to store a memory
request's ASI on SPARC. This is not the case any more since other ISAs
use the ASI bits to store architecture-dependent information. This
changeset renames the ASI_BITS to ARCH_BITS which better describes
their use. Additionally, the getAsi() accessor is renamed to
getArchFlags().
Using address bit 63 to identify generic IPRs caused problems on
SPARC, where IPRs are heavily used. This changeset redefines how
generic IPRs are identified. Instead of using bit 63, we now use a
separate flag (GENERIC_IPR) a memory request.
There is a potential race between enabling asynchronous IO and
selecting the target for the SIGIO signal. This changeset move the
F_SETOWN call to before the F_SETFL call that enables SIGIO
delivery. This ensures that signals are always sent to the correct
process.
This changset adds calls to the service the instruction event queues
that accidentally went missing from commit [0063c7dd18ec]. The
original commit only included the code needed to schedule instruction
stops from KVM and missed the functionality to actually service the
events.
In order to support m5ops in virtualized environments, we need to use
a memory mapped interface. This changeset adds support for that by
reserving 0xFFFF0000-0xFFFFFFFF and mapping those to the generic IPR
interface for m5ops. The mapping is done in the
X86ISA::TLB::finalizePhysical() which means that it just works for all
of the CPU models, including virtualized ones.
In order to support m5ops on virtualized CPUs, we need to either
intercept hypercall instructions or provide a memory mapped m5ops
interface. Since KVM does not normally pass the results of hypercalls
to userspace, which makes that method unfeasible. This changeset
introduces support for m5ops using memory mapped mmapped IPRs. This is
implemented by adding a class of "generic" IPRs which are handled by
architecture-independent code. Such IPRs always have bit 63 set and
are handled by handleGenericIprRead() and
handleGenericIprWrite(). Platform specific impementations of
handleIprRead and handleIprWrite should use
GenericISA::isGenericIprAccess to determine if an IPR address should
be handled by the generic code instead of the architecture-specific
code. Platforms that don't need their own IPR support can reuse
GenericISA::handleIprRead() and GenericISA::handleIprWrite().
The x87 FPU supports three floating point formats: 32-bit, 64-bit, and
80-bit floats. The current gem5 implementation supports 32-bit and
64-bit floats, but only works correctly for 64-bit floats. This
changeset fixes the 32-bit float handling by correctly loading and
rounding (using truncation) 32-bit floats instead of simply truncating
the bit pattern.
80-bit floats are loaded by first loading the 80-bits of the float to
two temporary integer registers. A micro-op (cvtint_fp80) then
converts the contents of the two integer registers to the internal FP
representation (double). Similarly, when storing an 80-bit float,
there are two conversion routines (ctvfp80h_int and cvtfp80l_int) that
convert an internal FP register to 80-bit and stores the upper 64-bits
or lower 32-bits to an integer register, which is the written to
memory using normal integer stores.
X87 store instructions typically loads and pops the top value of the
stack and stores it in memory. The current implementation pops the
stack at the same time as the floating point value is loaded to a
temporary register. This will corrupt the state of the x87 stack if
the store fails. This changeset introduces a pop87 micro-instruction
that pops the stack and uses this instruction in the affected
macro-instructions to pop the stack after storing the value to memory.
Instruction events are currently ignored when executing in KVM. This
changeset adds support for triggering KVM exits based on instruction
counts using hardware performance counters. Depending on the
underlying performance counter implementation, there might be some
inaccuracies due to instructions being counted in the host kernel when
entering/exiting KVM.
Due to limitations/bugs in Linux's performance counter interface, we
can't reliably change the period of an overflow counter. We work
around this issue by detaching and reattaching the counter if we need
to reconfigure it.
This changeset adds support for synchronizing the FPU and SIMD state
of a virtual x86 CPU with gem5. It supports both the XSave API and the
KVM_(GET|SET)_FPU kernel API. The XSave interface can be disabled
using the useXSave parameter (in case of kernel
issues). Unfortunately, KVM_(GET|SET)_FPU interface seems to be buggy
in some kernels (specifically, the MXCSR register isn't always
synchronized), which means that it might not be possible to
synchronize MXCSR on old kernels without the XSave interface.
This changeset depends on the __float80 type in gcc and might not
build using llvm.
The x87 FPU on x86 supports extended floating point. We currently
handle all floating point on x86 as double and don't support 80-bit
loads/stores. This changeset add a utility function to load and
convert 80-bit floats to doubles (loadFloat80) and another function to
store doubles as 80-bit floats (storeFloat80). Both functions use
libfputils to do the conversion in software. The functions are
currently not used, but are required to handle floating point in KVM
and to properly support all x87 loads/stores.
There are cases when the segment registers in gem5 are not compatible
with VMX. This changeset works around all known such issues. Specifically:
* The accessed bits in CS, SS, DD, ES, FS, GS are forced to 1.
* The busy bit in TR is forced to 1.
* The protection level of SS is forced to the same protection level as
CS. The difference /seems/ to be caused by a bug in gem5's x86
implementation.
This changeset adds support for KVM on x86. Full support is split
across a number of commits since some features are relatively
complex. This changeset includes support for:
* Integer state synchronization (including segment regs)
* CPUID (gem5's CPUID values are inserted into KVM)
* x86 legacy IO (remapped and handled by gem5's memory system)
* Memory mapped IO
* PCI
* MSRs
* State dumping
Most of the functionality is fairly straight forward. There are some
quirks to support PCI enumerations since this is done in the TLB(!) in
the simulated CPUs. We currently replicate some of that code.
Unlike the ARM implementation, the x86 implementation of the virtual
CPU does not use the cycles hardware counter. KVM on x86 simulates the
time stamp counter (TSC) in the kernel. If we just measure host cycles
using perfevent, we might end up measuring a slightly different number
of cycles. If we don't get the cycle accounting right, we might end up
rewinding the TSC, with all kinds of chaos as a result.
An additional feature of the KVM CPU on x86 is extended state
dumping. This enables Python scripts controlling the simulator to
request dumping of a subset of the processor state. The following
methods are currenlty supported:
* dumpFpuRegs
* dumpIntRegs
* dumpSpecRegs
* dumpDebugRegs
* dumpXCRs
* dumpXSave
* dumpVCpuEvents
* dumpMSRs
Known limitations:
* M5 ops are currently not supported.
* FPU synchronization is not supported (only affects CPU switching).
Both of the limitations will be addressed in separate commits.
The KVM base class incorrectly assumed that handleIprRead and
handleIprWrite both return ticks. This is not the case, instead they
return cycles. This changeset converts the returned cycles to ticks
when handling IPR accesses.
There is a possibility that the timespec used to arm a timer becomes
zero if the number of ticks used when arming a timer is close to the
resolution of the timer. Due to the semantics of POSIX timers, this
actually disarms the timer. This changeset fixes this issue by
eliminating the rounding error (we always round away from zero
now). It also reuses the minimum number of cycles, which were
previously only used for cycle-based timers, to calculate a more
useful resolution.
This changeset adds the convX87XTagsToTags() and convX87TagsToXTags()
which convert between the tag formats in the FTW register and the
format used in the xsave area. The conversion from to the x87 FTW
representation is currently loses some information since it does not
reconstruct the valid/zero/special flags which are not included in the
xsave representation.
The order between updating and using arg_num in
PseudoInst::pseudoInst() is currently undefined. This changeset
explicitly updates arg_num after it has been used to extract an
argument.
--HG--
extra : rebase_source : 67c46dc3333d16ce56687ee8aea41ce6c6d133bb
This patch ensures that a dequeue event is not scheduled if the memory
controller is waiting for a retry already. Without this check it is
possible for the controller to attempt sending something whilst
already having one packet that is in retry, thus causing the bus to
have an assertion failure.
This patch fixes an issue which prevented gem5 from running when built
using swig 2.0.9 and 2.0.10. The generated event.py tried to import
m5.internal which in turn relied on importing event. This patch seems
to fix the problem, and so far has not caused any other issues.
In order to support hardware virtualization, we need to be able to
check if there are any interrupts pending irregardless of the
rflags.intf value. This changeset adds the checkInterruptsRaw() method
to the x86 interrupt control. It returns true if there are pending
interrupts that can be delivered as soon as the CPU is ready for
interrupt delivery.
The Topology source sets up input and output buffers for each of the external
nodes of a topology by indexing on Ruby's generated controller unique IDs.
These unique IDs are found by adding the MachineType_base_number to the version
number of each controller (see any generated *_Controller.cc - init() calls
getToNetQueue and getFromNetQueue using m_version + base). However, the
Topology object used the cntrl_id - which is required to be unique across all
controllers - to index the controllers list as they are being connected to
their input and output buffers. If the cntrl_ids did not match the Ruby unique
ID, the throttles end up connected to incorrectly indexed nodes in the network,
resulting in packets traversing incorrect network paths. This patch fixes the
Topology indexing scheme by using the Ruby unique ID to match that of the
SimpleNetwork buffer vectors.
Previously, the LSQ would instantiate MaxThreads LSQUnits in the body of it's
object, but it would only initialize numThreads LSQUnits as specified by the
user. This had the effect of leaving some LSQUnits uninitialized when the
number of threads was less than MaxThreads, and when adding statistics to the
LSQUnit that must be initialized, this caused the stats initialization check to
fail. By dynamically instantiating LSQUnits, they are all initialized and this
avoids uninitialized LSQUnits from floating around during runtime.
The previous changeset (9863:9483739f83ee) used STL vector containers to
dynamically allocate stats in the Ruby SimpleNetwork, Switch and Throttle. For
gcc versions before at least 4.6.3, this causes the standard vector allocator
to call Stats copy constructors (a no-no, since stats should be allocated in
the body of each SimObject instance). Since the size of these stats arrays is
known at compile time (NOTE: after code generation), this patch changes their
allocation to be static rather than using an STL vector.
This patch adds the config ini string as a tooltip that can be
displayed in most browsers rendering the resulting svg. Certain
characters are modified for HTML output.
Tested on chrome and firefox.
This patch is adding a splash of colour to the dot output to make it
easier to distinguish objects of different types. As a bonus, the
pastel-colour palette also makes the output look like a something from
the 21st century.
This patch adds the class name to the label, creates some more space
by increasing the rank separation, and additionally outputs the graph
as an editable SVG in addition to the PDF.
This patch makes it possible to once again build gem5 without any
ISA. The main purpose is to enable work around the interconnect and
memory system without having to build any CPU models or device models.
The regress script is updated to include the NULL ISA target. Currently
no regressions make use of it, but all the testers could (and perhaps
should) transition to it.
--HG--
rename : build_opts/NOISA => build_opts/NULL
rename : src/arch/noisa/SConsopts => src/arch/null/SConsopts
rename : src/arch/noisa/cpu_dummy.hh => src/arch/null/cpu_dummy.hh
rename : src/cpu/intr_control.cc => src/cpu/intr_control_noisa.cc
The branch predictor is guarded by having either the in-order or
out-of-order CPU as one of the available CPU models and therefore
should not be used in the BaseCPU. This patch moves the parameter to
the relevant CPU classes.
This patch is a first step to getting NOISA working again. A number of
redundant includes make life more difficult than it has to be and this
patch simply removes them. There are also some redundant forward
declarations removed.
This patch moves the system virtual port proxy to the Alpha system
only to make the resurrection of the NOISA slightly less
painful. Alpha is the only ISA that is actually using it.
This patch changes the SConscript to build gem5 with libc++ on OSX as
the conventional libstdc++ does not have the C++11 constructs that the
current code base makes use of (e.g. std::forward).
Since this was the last use of the transitional TR1, the unordered map
and set header can now be simplified as well.
This patch updates the stats to reflect the: 1) addition of the
internal queue in SimpleMemory, 2) moving of the memory class outside
FSConfig, 3) fixing up of the 2D vector printing format, 4) specifying
burst size and interface width for the DRAM instead of relying on
cache-line size, 5) performing merging in the DRAM controller write
buffer, and 6) fixing how idle cycles are counted in the atomic and
timing CPU models.
The main reason for bundling them up is to minimise the changeset
size.
Added a couple missing updates to the notIdleFraction stat. Without
these, it sometimes gives a (not) idle fraction that is greater than 1
or less than 0.
This patch adds support for specifying multi-channel memory
configurations on the command line, e.g. 'se/fs.py
--mem-type=ddr3_1600_x64 --mem-channels=4'. To enable this, it
enhances the functionality of MemConfig and moves the existing
makeMultiChannel class method from SimpleDRAM to the support scripts.
The se/fs.py example scripts are updated to make use of the new
feature.
This patch changes the default parameter value of conf_table_reported
to match the common case. It also simplifies the regression and config
scripts to reflect this change.
This patch addresses an issue with trace playback in the TrafficGen
where the trace was reset but the header was not read from the trace
when a captured trace was played back for a second time. This resulted
in parsing errors as the expected message was not found in the trace
file.
The header check is moved to an init funtion which is called by the
constructor and when the trace is reset. This ensures that the trace
header is read each time when the trace is replayed.
This patch also addresses a small formatting issue in a panic.
This patch changes the data structure used for the DRAM read, write
and response queues from an STL list to deque. This optimisation is
based on the observation that the size is small (and fixed), and that
the structures are frequently iterated over in a linear fashion.
This patch implements basic write merging in the DRAM to avoid
redundant bursts. When a new access is added to the queue it is
compared against the existing entries, and if it is either
intersecting or immediately succeeding/preceeding an existing item it
is merged.
There is currently no attempt made at avoiding iterating over the
existing items in determining whether merging is possible or not.
This patch gets rid of bytesPerCacheLine parameter and makes the DRAM
configuration separate from cache line size. Instead of
bytesPerCacheLine, we define a parameter for the DRAM called
burst_length. The burst_length parameter shows the length of a DRAM
device burst in bits. Also, lines_per_rowbuffer is replaced with
device_rowbuffer_size to improve code portablity.
This patch adds a burst length in beats for each memory type, an
interface width for each memory type, and the memory controller model
is extended to reason about "system" packets vs "dram" packets and
assemble the responses properly. It means that system packets larger
than a full burst are split into multiple dram packets.
This patch modifies the SimpleTimingCPU drain check to also consider
the fetch event. Previously, there was an assumption that there is
never a fetch event scheduled if the CPU is not executing
microcode. However, when a context is activated, a fetch even is
scheduled, and microPC() is zero.
This patch adds a check to the quiesce operation to ensure that the
CPU does not suspend itself when there are unmasked interrupts
pending. Without this patch there are corner cases when the CPU gets
an interrupt before the quiesce is executed and then never wakes up
again.
This patch addresses an issue with the text-based stats output which
resulted in Vector2D stats being printed without subnames in the event
that one of the dimensions was of length 1.
This patch also fixes the total printing for the 2D vector. Previously
totals were printed without explicitly stating that a total was being
printed. This has been rectified in this patch.
This patch adds the notion of voltage domains, and groups clock
domains that operate under the same voltage (i.e. power supply) into
domains. Each clock domain is required to be associated with a voltage
domain, and the latter requires the voltage to be explicitly set.
A voltage domain is an independently controllable voltage supply being
provided to section of the design. Thus, if you wish to perform
dynamic voltage scaling on a CPU, its clock domain should be
associated with a separate voltage domain.
The current implementation of the voltage domain does not take into
consideration cases where there are derived voltage domains running at
ratio of native voltage domains, as with the case where there can be
on-chip buck/boost (charge pumps) voltage regulation logic.
The regression and configuration scripts are updated with a generic
voltage domain for the system, and one for the CPUs.
This patch adds a packet queue in SimpleMemory to avoid using the
packet queue in the port (and thus have no involvement in the flow
control). The port queue was bound to 100 packets, and as the
SimpleMemory is modelling both a controller and an actual RAM, it
potentially has a large number of packets in flight. There is
currently no limit on the number of packets in the memory controller,
but this could easily be added in a follow-on patch.
As a result of the added internal storage, the functional access and
draining is updated. Some minor cleaning up and renaming has also been
done.
The memtest regression changes as a result of this patch and the stats
will be updated.
This patch fixes a bug in the O3 fetch stage that was introduced when
the cache line size was moved to the system. By mistake, the
initialisation and resetting of the fetch stage was merged and put in
the constructor. The resetting is now re-added where it should be.
Some of the code in StateMachine.py file is added to all the controllers and
is independent of the controller definition. This code is being moved to the
AbstractController class which is the parent class of all controllers.
This patch adds checkpointing support to x86 tlb. It upgrades the
cpt_upgrader.py script so that previously created checkpoints can
be updated. It moves the checkpoint version to 6.
This patch removes the notion of a peer block size and instead sets
the cache line size on the system level.
Previously the size was set per cache, and communicated through the
interconnect. There were plenty checks to ensure that everyone had the
same size specified, and these checks are now removed. Another benefit
that is not yet harnessed is that the cache line size is now known at
construction time, rather than after the port binding. Hence, the
block size can be locally stored and does not have to be queried every
time it is used.
A follow-on patch updates the configuration scripts accordingly.
Instead of relying on derived classes explicitly assigning
to the BasicPioDevice pioSize field, require them to pass
a size value in to the constructor.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
PciDev and IntDev stuck out as the only device classes that
ended in 'Dev' rather than 'Device'. This patch takes care
of that inconsistency.
Note that you may need to delete pre-existing files matching
build/*/python/m5/internal/param_* as scons does not pick up
indirect dependencies on imported python modules when generating
params, and the PciDev -> PciDevice rename takes place in a
file (dev/Device.py) that gets imported quite a bit.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
It was confusing having an AmbaDev namespace along with an
AmbaDevice class. The namespace stuff is now moved in to
a new base AmbaDevice class, which is a mixin for classes
AmbaPioDevice (the former AmbaDevice) and AmbaDmaDevice
to provide the readId function as an inherited member function.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
A couple of devices that have single fixed memory mapped regions
were not derived from BasicPioDevice, when that's exactly
the functionality that BasicPioDevice provides. This patch
gets rid of a little bit of redundant code by making those
devices actually do so.
Also fixed the weird case of X86ISA::Interrupts, where
the class already did derive from BasicPioDevice but
didn't actually use all the features it could have.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
This code seems not to be of any use now. There is no path in the simulator
that allows for reconfiguring the network. A better approach would be to
take a checkpoint and start the simulation from the checkpoint with the new
configuration.
This patch reorganizes the cache tags to allow more flexibility to
implement new replacement policies. The base tags class is now a
clocked object so that derived classes can use a clock if they need
one. Also having deriving from SimObject allows specialized Tag
classes to be swapped in/out in .py files.
The cache set is now templatized to allow it to contain customized
cache blocks with additional informaiton. This involved moving code to
the .hh file and removing cacheset.cc.
The statistics belonging to the cache tags are now including ".tags"
in their name. Hence, the stats need an update to reflect the change
in naming.
This patch removes the multiplication operator support for Clock
parameters as this functionality is now achieved by creating derived
clock domains.
Nate, this one is for you.
This patch adds the notion of source- and derived-clock domains to the
ClockedObjects. As such, all clock information is moved to the clock
domain, and the ClockedObjects are grouped into domains.
The clock domains are either source domains, with a specific clock
period, or derived domains that have a parent domain and a divider
(potentially chained). For piece of logic that runs at a derived clock
(a ratio of the clock its parent is running at) the necessary derived
clock domain is created from its corresponding parent clock
domain. For now, the derived clock domain only supports a divider,
thus ensuring a lower speed compared to its parent. Multiplier
functionality implies a PLL logic that has not been modelled yet
(create a separate clock instead).
The clock domains should be used as a mechanism to provide a
controllable clock source that affects clock for every clocked object
lying beneath it. The clock of the domain can (in a future patch) be
controlled by a handler responsible for dynamic frequency scaling of
the respective clock domains.
All the config scripts have been retro-fitted with clock domains. For
the System a default SrcClockDomain is created. For CPUs that run at a
different speed than the system, there is a seperate clock domain
created. This domain incorporates the CPU and the associated
caches. As before, Ruby runs under its own clock domain.
The clock period of all domains are pre-computed, such that no virtual
functions or multiplications are needed when calling
clockPeriod. Instead, the clock period is pre-computed when any
changes occur. For this to be possible, each clock domain tracks its
children.
This patch adds a 'sys_clock' command-line option and use it to assign
clocks to the system during instantiation.
As part of this change, the default clock in the System class is
removed and whenever a system is instantiated a system clock value
must be set. A default value is provided for the command-line option.
The configs and tests are updated accordingly.
This patch removes the explicit setting of the clock period for
certain instances of CoherentBus, NonCoherentBus and IOCache where the
specified clock is same as the default value of the system clock. As
all the values used are the defaults, there are no performance
changes. There are similar cases where the toL2Bus is set to use the
parent CPU clock which is already the default behaviour.
The main motivation for these simplifications is to ease the
introduction of clock domains.
This patch does a bit of tidying up in the bridge code, adding const
where appropriate and also removing redundant checks and adding a few
new ones.
There are no changes to the behaviour of any regressions.
This patch fixes the CommMonitor local variable names, and also
introduces a variable to capture if it expects to see a response. The
latter check considers both needsResponse and memInhibitAsserted.
This patch changes the IEW drain check to include the FU pool as there
can be instructions that are "stored" in FU completion events and thus
not covered by the existing checks. With this patch, we simply include
a check to see if all the FUs are considered non-busy in the next
tick.
Without this patch, the pc-switcheroo-full regression fails after
minor changes to the cache timing (aligning to clock edge).
This patch fixes an outstanding issue in the cache timing calculations
where an atomic access returned a time in Cycles, but the port
forwarded it on as if it was in Ticks.
A separate patch will update the regression stats.
This patch fixes a bug in the granularity calculation. For example, if
the high bit is 6 (counting from 0) and we have one interleaving bit,
then the granularity is now 2 ** (6 - 1 + 1) = 64.
This patch changes the updards snoop packet to avoid allocating and
later deleting it. As the code executes in 0 time and the lifetime of
the packet does not extend beyond the block there is no reason to heap
allocate it.
This patch removes the printing of the SparseHist total in the
stats.txt output file. This has been removed as a sparse histogram has
no total, and therefore this was printing out the value of a
non-local, unrelated variable.
This patch adds separate actions for requests that missed in the local cache
and messages were sent out to get the requested line. These separate actions
are required for differentiating between the hit and miss latencies in the
statistics collected.
This patch adds separate actions for requests that missed in the local cache
and messages were sent out to get the requested line. These separate actions
are required for differentiating between the hit and miss latencies in the
statistics collected.
The patch started of with removing the global variables from the profiler for
profiling the miss latency of requests made to the cache. The corrresponding
histograms have been moved to the Sequencer. These are combined together when
the histograms are printed. Separate histograms are now maintained for
tracking latency of all requests together, of hits only and of misses only.
A particular set of histograms used to use the type GenericMachineType defined
in one of the protocol files. This patch removes this type. Now, everything
that relied on this type would use MachineType instead. To do this, SLICC has
been changed so that multiple machine types can be declared by a controller
in its preamble.
This patch removes the following three files: RubySlicc_Profiler.sm,
RubySlicc_Profiler_interface.cc and RubySlicc_Profiler_interface.hh.
Only one function prototyped in the file RubySlicc_Profiler.sm. Rest of the
code appearing in any of these files is not in use. Therefore, these files
are being removed.
That one single function, profileMsgDelay(), is being moved to the protocol
files where it is in use. If we need any of these deleted functions, I think
the right way to make them visible is to have the AbstractController class in
a .sm and let the controller state machine inherit from this class. The
AbstractController class can then have the prototypes of these profiling
functions in its definition.
2013-06-24 08:59:08 -05:00
Joel Hestness ext:(%2C%20Nilay%20Vaish%20%3Cnilay%40cs.wisc.edu%3E)
The m_size variable attempted to track m_prio_heap.size(), but it did so
incorrectly due to the functions reanalyzeMessages and reanalyzeAllMessages().
Since this variable is intended to track m_prio_heap.size(), we can simply
replace instances where m_size is referenced with m_prio_heap.size(), which
has the added bonus of removing the need for m_size.
Note: This patch also removes an extraneous DPRINTF format string designator
from reanalyzeAllMessages()
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
Previously, .sm files were allowed to use the same name for a type and a
variable. This is unnecessarily confusing and has some bad side effects, like
not being able to declare later variables in the same scope with the same type.
This causes the compiler to complain and die on things like Address Address.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
Change all occurrances of Address as a variable name to instead use Addr.
Address is an allowed name in slicc even when Address is also being used as a
type, leading to declarations of "Address Address". While this works, it
prevents adding another field of type Address because the compiler then thinks
Address is a variable name, not type.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
The current implementation of the x87 never updates the x87 tag
word. This is currently not a big issue since the simulated x87 never
checks for stack overflows, however this becomes an issue when
switching between a virtualized CPU and a simulated CPU. This
changeset adds support, which is enabled by default, for updating the
tag register to every floating point microop that updates the stack
top using the spm mechanism.
The new tag words is generated by the helper function
X86ISA::genX87Tags(). This function is currently limited to flagging a
stack position as valid or invalid and does not try to distinguish
between the valid, zero, and special states.
This changeset actually fixes two issues:
* The lfpimm instruction didn't work correctly when applied to a
floating point constant (it did work for integers containing the
bit string representation of a constant) since it used
reinterpret_cast to convert a double to a uint64_t. This caused a
compilation error, at least, in gcc 4.6.3.
* The instructions loading floating point constants in the x87
processor didn't work correctly since they just stored a truncated
integer instead of a double in the floating point register. This
changeset fixes the old microcode by using lfpimm instruction
instead of the limm instructions.
The current implementation of fprem simply does an fmod and doesn't
simulate any of the iterative behavior in a real fprem. This isn't
normally a problem, however, it can lead to problems when switching
between CPU models. If switching from a real CPU in the middle of an
fprem loop to a simulated CPU, the output of the fprem loop becomes
correupted. This changeset changes the fprem implementation to work
like the one on real hardware.
Reuse the address finalization code in the TLB instead of replicating
it when handling MMIO. This patch also adds support for injecting
memory mapped IPR requests into the memory system.
The rflags register is spread across several different registers. Most
of the flags are stored in MISCREG_RFLAGS, but some are stored in
microcode registers. When accessing RFLAGS, we need to reconstruct it
from these registers. This changeset adds two functions,
X86ISA::getRFlags() and X86ISA::setRFlags(), that take care of this
magic.
This changeset fixes two problems in the FABS and FCHS
implementation. First, the ISA parser expects the assignment in
flag_code to be a pure assignment and not an and-assignment, which
leads to the isa_parser omitting the misc reg update. Second, the FCHS
and FABS macro-ops don't set the SetStatus flag, which means that the
default micro-op version, which doesn't update FSW, is executed.
This changeset adds the following stats to KVM:
* numVMHalfEntries: Number of entries into KVM to finalize pending
IO operations without executing guest instructions. These typically
happen as a result of a drain where the guest must finalize some
operations before the guest state is consistent.
* numExitSignal: Number of VM exits that have been triggered by a
signal. These usually happen as a result of the timer that limits
the time spent in KVM.
We used to use the KVM CPU's clock to specify the host frequency. This
was not ideal for several reasons. One of them being that the clock
parameter of a CPU determines the frequency of some of the components
connected to the CPU. This changeset adds a separate hostFreq
parameter that should be used to specify the host frequency until we
add code to autodetect it. The hostFactor should still be used to
specify the conversion factor between the host performance and that of
the simulated system.
We currently execute instructions in the guest and then handle any IO
request right after we break out of the virtualized environment. This
has the effect of executing IO requests in the exact same tick as the
first instruction in the sequence that was just run. There seem to be
cases where this simplification upsets some timing-sensitive devices.
This changeset splits execute and IO (and other services) across
multiple ticks. This is implemented by adding a separate
RunningService state to the CPU state machine. When a VM requires
service, it enters into this state and pending IO is then serviced in
the future instead of immediately. The delay between getting the
request and servicing it depends on the number of cycles executed in
the guest, which allows other components to catch up with the CPU.
Update the system's totalNumInst counter when exiting from KVM and
maintain an internal absolute instruction count instead of relying on
the one from perf.
The TSC value stored in MISCREG_TSC is actually just an offset from
the current CPU cycle to the actual TSC value. Writes with
side-effects to the TSC subtract the current cycle count before
storing the new value, while reads add the current cycle count. When
switching CPUs, the current value is copied without side-effects. This
works as long as the source and the destination CPUs have the same
clock frequencies. The TSC will jump, sometimes backwards, if they
have different clock frequencies. Most OSes assume the TSC to be
monotonic and break when this happens.
This changeset makes sure that the TSC is copied with side-effects to
ensure that the offset is updated to match the new CPU.
HG changset 34e3295b0e39 introduced a check in the main simulation
loop that discards exit events that happen at the same tick as another
exit event. This was supposed to fix a problem where a simulation
script got confused by multiple exit events. This obviously breaks the
simulator since it can hide important simulation events, such as a
simulation failure, that happen at the same time as a non-fatal
simulation event.
Currently, the only way to get a CPU to stop after a fixed number of
instructions/loads is to set a property on the CPU that causes a
SimLoopExitEvent to be scheduled when the CPU is constructed. This is
clearly not ideal in cases where the simulation script wants the CPU
to stop at multiple instruction counts (e.g., SimPoint generation).
This changeset adds the methods scheduleInstStop() and
scheduleLoadStop() to the BaseCPU. These methods are exported to
Python and are designed to be used from the simulation script. By
using these methods instead of the old properties, a simulation script
can schedule a stop at any point during simulation or schedule
multiple stops. The number of instructions specified when scheduling a
stop is relative to the current point of execution.
This patch removes per processor cycle count, histogram for filter stats,
histogram for multicasts, histogram for prefetch wait, some function
prototypes that do not have definitions.
The Profiler class does not need an event for dumping statistics
periodically. This is because there is a method for dumping statistics
for all the sim objects periodically. Since Ruby is a sim object, its
statistics are also included.
This moves event and transition count statistics for cache controllers to
gem5's statistics. It does the same for the statistics associated with the
memory controller in ruby.
All the cache/directory/dma controllers individually collect the event and
transition counts. A callback function, collateStats(), has been added that
is invoked on the controller version 0 of each controller class. This
function adds all the individual controller statistics to a vector
variables. All the code for registering the statistical variables and
collating them is generated by SLICC. The patch removes the files
*_Profiler.{cc,hh} and *_ProfileDumper.{cc,hh} which were earlier used for
collecting and dumping statistics respectively.
This patch adds a new flag to specify if the data values for a given vector
should be printed in one line in the stats.txt file. The default behavior
will be to print the data in multiple lines. It makes changes to print
functions to enforce this behavior.
in the TLB
Some architectures (currently only x86) require some fixing-up of
physical addresses after a normal address translation. This is usually
to remap devices such as the APIC, but could be used for other memory
mapped devices as well. When running the CPU in a using hardware
virtualization, we still need to do these address fix-ups before
inserting the request into the memory system. This patch moves this
patch allows that code to be used by such CPUs without doing full
address translations.
The custom Python loader didn't comply with PEP302 for two reasons:
* Previously, we would overwrite old modules on name
conflicts. PEP302 explicitly states that: "If there is an existing
module object named 'fullname' in sys.modules, the loader must use
that existing module".
* The "__package__" attribute wasn't set. PEP302: "The __package__
attribute must be set."
This changeset addresses both of these issues.
Some architectures have special registers in the guest that can be
used to do cycle accounting. This is generally preferrable since the
prevents the guest from seeing a non-monotonic clock. This changeset
adds a virtual method, getHostCycles(), that the architecture-specific
code can override to implement this functionallity. The default
implementation uses the hwCycles counter.
timer_create can apparently return -1 and set errno to EAGAIN if the
kernel suffered a temporary failure when allocating a timer. This
happens from time to time, so we need to handle it.
It is now required to initialize the thread context by calling
startup() on it. Failing to do so currently causes decoder in
x86-based CPUs to get very confused when restoring from checkpoints.
Some Linux versions disable updates (regB.set = 1) to prevent the chip
from updating its internal state while the OS is updating it. Support
for this was already there, this patch merely disables the check in
writeReg that prevented it from being enabled. The patch also includes
support for disabling the divider, which is used to control when clock
updates should start after setting the internal RTC state.
These changes are required to boot most vanilla Linux distributions
that update the RTC settings at boot.
Rewrite reg A & B handling to use the bitunion stuff instead of bit
masking. Add better error messages when the kernel tries to enable
unsupported stuff.
This patch changes the class names of the variuos DRAM configurations
to better reflect what memory they are based on. The speed and
interface width is now part of the name, and also the alias that is
used to select them on the command line.
Some minor changes are done to the actual parameters, to better
reflect the named configurations. As a result of these changes the
regressions change slightly and the stats will be bumped in a separate
patch.
This patch adds a histogram to track how many bytes are accessed in an
open row before it is closed. This metric is useful in characterising
a workload and the efficiency of the DRAM scheduler. For example, a
DDR3-1600 device requires 44 cycles (tRC) before it can activate
another row in the same bank. For a x32 interface (8 bytes per cycle)
that means 8 x 44 = 352 bytes must be transferred to hide the
preparation time.
This patch adds a frontend and backend static latency to the DRAM
controller by delaying the responses. Two parameters expressing the
frontend and backend contributions in absolute time are added to the
controller, and the appropriate latency is added to the responses when
adding them to the (infinite) queued port for sending.
For writes and reads that hit in the write buffer, only the frontend
latency is added. For reads that are serviced by the DRAM, the static
latency is the sum of the pipeline latencies of the entire frontend,
backend and PHY. The default values are chosen based on having roughly
10 pipeline stages in total at 500 MHz.
In the future, it would be sensible to make the controller use its
clock and convert these latencies (and a few of the DRAM timings) to
cycles.
This patch does some minor tidying up of the MSHR and MSHRQueue. The
clean up started as part of some ad-hoc tracing and debugging, but
seems worthwhile enough to go in as a separate patch.
The highlights of the changes are reduced scoping (private) members
where possible, avoiding redundant new/delete, and constructor
initialisation to please static code analyzers.
This patch prunes the TraceCPU as the code is stale and the
functionality that it provided can now be achieved with the TrafficGen
using its trace playback mode.
The TraceCPU was able to play back pre-recorded memory traces of a few
different formats, and to achieve this level of flexibility with the
TrafficGen, use the util/encode_packet_trace (with suitable
modifications) to create a protobuf trace off-line.
Add a check which ensures that the minumum period for the LINEAR and
RANDOM traffic generator states is less than or equal to the maximum
period. If the minimum period is greater than the maximum period a
fatal is triggered.
This patch fixes a bug with the traffic generator which occured when
reading in the state transitions from the configuration
file. Previously, the size of the vector which stored the transitions
was used to get the size of the transitions matrix, rather than using
the number of states. Therefore, if there were more transitions than
states, i.e. some transitions has a probability of less than 1, then
the traffic generator would fatal when trying to check the
transitions.
This issue has been addressed by using the number of input states,
rather then the number of transitions.
This patch adds an optional request elasticity to the traffic
generator, effectievly compensating for it in the case of the linear
and random generators, and adding it in the case of the trace
generator. The accounting is left with the top-level traffic
generator, and the individual generators do the necessary math as part
of determining the next packet tick.
Note that in the linear and random generators we have to compensate
for the blocked time to not be elastic, i.e. without this patch the
aforementioned generators will slow down in the case of back-pressure.
This patch changes the queued port for a conventional master port and
stalls the traffic generator when requests are not immediately
accepted. This is a first step to allowing elasticity in the injection
of requests.
The patch also adds stats for the sent packets and retries, and
slightly changes how the nextPacketTick and getNextPacket
interact. The advancing of the trace is now moved to getNextPacket and
nextPacketTick is only responsible for answering the question when the
next packet should be sent.
This patch moves the responsibility for sending packets out of the
generator states and leaves it with the top-level traffic
generator. The main aim of this patch is to enable a transition to
non-queued ports, i.e. with send/retry flow control, and to do so it
is much more convenient to not wrap the port interactions and instead
leave it all local to the traffic generator.
The generator states now only govern when they are ready to send
something new, and the generation of the packets to send. They thus
have no knowledge of the port that is used.
This patch simplifies the object hierarchy of the traffic generator by
getting rid of the StateGraph class and folding this functionality
into the traffic generator itself.
The main goal of this patch is to facilitate upcoming changes by
reducing the number of affected layers.
This patch introduces a mirrored internal snoop port to facilitate
easy addition of flow control for the snoop responses that are turned
into normal responses on their return. To perform this, the slave
ports of the coherent bus are wrapped in internal master ports that
are passed as the source ports to the response layer in question.
As a result of this patch, there is more contention for the response
resources, and as such system performance will decrease slightly.
A consequence of the mirrored internal port is that the port the bus
tells to retry (the internal one) and the port actually retrying (the
mirrored) one are not the same. Thus, the existing check in tryTiming
is not longer correct. In fact, the test is redundant as the layer is
only in the retry state while calling sendRetry on the waiting port,
and if the latter does not immediately call the bus then the retry
state is left. Consequently the check is removed.
This patch makes the buses multi layered, and effectively creates a
crossbar structure with distributed contention ports at the
destination ports. Before this patch, a bus could have a single
request, response and snoop response in flight at any time, and with
these changes there can be as many requests as connected slaves (bus
master ports), and as many responses as connected masters (bus slave
ports).
Together with address interleaving, this patch enables us to create
high-throughput memory interconnects, e.g. 50+ GByte/s.
This patch makes the flow control and state updates of the coherent
bus more clear by separating the two cases, i.e. forward as a snoop
response, or turn it into a normal response.
With this change it is also more clear what resources are being
occupied, and that we effectively bypass the busy check for the second
case. As a result of the change in resource usage some stats change.
This patch does some minor housekeeping on the bus code, removing
redundant code, and moving the extraction of the destination id to the
top of the functions using it.
This patch adds a basic set of stats which are hard to impossible to
implement using only communication monitors, and are needed for
insight such as bus utilization, transactions through the bus etc.
Stats added include throughput and transaction distribution, and also
a two-dimensional vector capturing how many packets and how much data
is exchanged between the masters and slaves connected to the bus.
This patch changes the set used to track outstanding requests to an
unordered set (part of C++11 STL). There is no need to maintain the
order, and hopefully there might even be a small performance benefit.
This patch adds a typical (leaning towards fast) LPDDR3 configuration
based on publically available data. As expected, it looks very similar
to the LPDDR2-S4 configuration, only with a slightly lower burst time.
This patch adapts the existing LPDDR2 configuration to make use of the
multi-channel functionality. Thus, to get a x64 interface two
controllers should be instantiated using the makeMultiChannel method.
The page size and ranks are also adapted to better suit with a typical
LPDDR2 part.
This patch removes the explicit memset as it is redundant and causes
the simulator to touch the entire space, forcing the host system to
allocate the pages.
Anonymous pages are mapped on the first access, and the page-fault
handler is responsible for zeroing them. Thus, the pages are still
zeroed, but we avoid touching the entire allocated space which enables
us to use much larger memory sizes as long as not all the memory is
actually used.
This patch changes how the streams are created to avoid the size
limitation on the coded streams. As we only read/write a single
message at a time, there is never any message larger than a few
bytes. However, the coded stream eventually complains that its
internal counter reaches 64+ MByte if the total file size exceeds this
value.
Based on suggestions in the protobuf discussion forums, the coded
stream is now created for every message that is read/written. The
result is that the internal byte count never goes about tens of bytes,
and we can read/write any size file that the underlying file I/O can
handle.
This patch changes the type of the hash function for BasicBlockRanges
to match the original definition of the templatized type. Without
this, clang raises a warning and combined with the "-Werror" flag this
causes compilation to fail.
This is the x86 version of the ARM changeset baa17ba80e06. In case an
instruction has been squashed by the o3 cpu, this patch allows page
table walker to avoid carrying out a pending translation that the
instruction requested for.
Currently call and return instructions are marked as IsCall and IsReturn. Thus, the
branch predictor does not use RAS for these instructions. Similarly, the number of
function calls that took place is recorded as 0. This patch marks these instructions
as they should be.
Currently all the integer microops are marked as IntAluOp and the floating
point microops are marked as FloatAddOp. This patch adds support for marking
different microops differently. Now IntMultOp, IntDivOp, FloatDivOp,
FloatMultOp, FloatCvtOp, FloatSqrtOp classes will be used as well. This will
help in providing different latencies for different op class.
This patch changes the way cache statistics are collected in ruby.
As of now, there is separate entity called CacheProfiler which holds
statistical variables for caches. The CacheMemory class defines different
functions for accessing the CacheProfiler. These functions are then invoked
in the .sm files. I find this approach opaque and prone to error. Secondly,
we probably should not be paying the cost of a function call for recording
statistics.
Instead, this patch allows for accessing statistical variables in the
.sm files. The collection would become transparent. Secondly, it would happen
in place, so no function calls. The patch also removes the CacheProfiler class.
--HG--
rename : src/mem/slicc/ast/InfixOperatorExprAST.py => src/mem/slicc/ast/OperatorExprAST.py
having separate params for the local/globalHistoryBits and the
local/globalPredictorSize can lead to inconsistencies if they
are not carefully set. this patch dervies the number of bits
necessary to index into the local/global predictors based on
their size.
the value of the localHistoryTableSize for the ARM O3 CPU has been
increased to 1024 from 64, which is more accurate for an A15 based
on some correlation against A15 hardware.
The CpuPort class was removed before the KVM patches were committed,
which means that the KVM interface currently doesn't compile. This
changeset adds the BaseKvmCPU::KVMCpuPort class which derives from
MasterPort. This class is used on the data and instruction ports
instead of the old CpuPort.
This changeset adds a 'numInsts' stat to the KVM-based CPU. It also
cleans up the variable names in kvmRun to make the distinction between
host cycles and estimated simulated cycles clearer. As a bonus
feature, it also fixes a warning (unreferenced variable) when
compiling in fast mode.
Add a debug print (when the Checkpoint debug flag is set) on serialize
and unserialize. Additionally, dump the KVM state before
serializing. The KVM state isn't dumped after unserializing since the
state is loaded lazily on the next KVM entry.
Device accesses are normally uncacheable. This change probably doesn't
make any difference since we normally disable caching when KVM is
active. However, there might be devices that check this, so we'd
better enable this flag to be safe.
The vsyscall address for gettimeofday is 0xffffffffff600000ul. The offset
therefore should be 0x0 instead of 0x410. This can be cross checked with
the file sysdeps/unix/sysv/linux/x86_64/gettimeofday.c in source of glibc.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
The existing implementation can read uninitialized data or stale information
from the cached PageTable entries.
1) Add a valid bit for the cache entries. Simply using zero for the virtual
address to signify invalid entries is not sufficient. Speculative, wrong-path
accesses frequently access page zero. The current implementation would return
a uninitialized TLB entry when address zero was accessed and the PageTable
cache entry was invalid.
2) When unmapping/mapping/remaping a page, invalidate the corresponding
PageTable cache entry if one already exists.
The 'lret' instruction reloads instruction pointer and code segment from the
stack and then pops them. But the popping part is missing from the current
implementation. This caused incorrect behavior in some code related to the
Fiasco OS. Microops are being added to rectify the behavior of the instruction.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
Due to recent changes to clocking system in Ruby and the way Ruby restores
state from a checkpoint, garnet was failing to run from a checkpointed state.
The problem is that Ruby resets the time to zero while warming up the caches.
If any component records a local copy of the time (read calls curCycle())
before the simulation has started, then that component will not operate until
that time is reached. In the context of this particular patch, the Garnet
Network class calls curCycle() at multiple places. Any non-operational
component can block in requests in the memory system, which the system
interprets as a deadlock. This patch makes changes so that Garnet can
successfully run from checkpointed state.
It adds a globally visible time at which the actual execution started. This
time is initialized in RubySystem::startup() function. This variable is only
meant for components with in Ruby. This replaces the private variable that
was maintained within Garnet since it is not possible to figure out the
correct time when the value of this variable can be set.
The patch also does away with all cases where curCycle() is called with in
some Ruby component before the system has actually started executing. This
is required due to the quirky manner in which ruby restores from a checkpoint.
This patch adds an address mapping scheme where the channel
interleaving takes place on a cache line granularity. It is similar to
the existing RaBaChCo that interleaves on a DRAM page, but should give
higher performance when there is less locality in the address
stream.
This patch changes the slightly ambigious names used for the address
mapping scheme to be more descriptive, and actually spell out what
they do. With this patch we also open up for adding more flavours of
open- and close-type mappings, i.e. interleaving across channels with
the open map.
This patch enables the use of the generator behaviours outside the
TrafficGen module. This is useful e.g. to allow packet replay modes
for other devices in the system without having to replace them with a
TrafficGen in the configuration files.
This change also enables more specific behaviours to be composed as
specific modules, e.g. BaseBandModem can use a number of generators
and have application-specific parameters based around a specific set
of generators.
This patch adds a WideIO 200 MHz configuration that can be used as a
baseline to compare with DDRx and LPDDRx. Note that it is a single
channel and that it should be replicated 4 times. It is based on
publically available information and attempts to capture an envisioned
8 Gbit single-die part (i.e. without TSVs).
This patch provides useful printouts throughut the memory system. This
includes pretty-printed cache tags and function call messages
(call-stack like).
This patch changes the SimpleTimingPort and RubyPort to panic on
inhibited requests as this should never happen in either of the
cases. The SimpleTimingPort is only used for the I/O devices PIO port
and the DMA devices config port and should thus never see an inhibited
request. Similarly, the SimpleTimingPort is also used for the
MessagePort in x86, and there should also not be any cases where the
port sees an inhibited request.
This changeset adds support for m5 pseudo-ops when running in
kvm-mode. Unfortunately, we can't trap the normal gem5 co-processor
entry in KVM (it doesn't seem to be possible to trap accesses to
non-existing co-processors). We therefore use BZJ instructions to
cause a trap from virtualized mode into gem5. The BZJ instruction is
becomes a normal branch to the gem5 fallback code when running in
simulated mode, which means that this patch does not need to change
the ARM ISA-specific code.
Note: This requires a patched host kernel.
All architectures execute m5 pseudo instructions by setting up
arguments according to the ABI and executing a magic instruction that
contains an operation number. Handling of such instructions is
currently spread across the different ISA implementations. This
changeset introduces the PseudoInst::pseudoInst function which handles
most of this in an architecture independent way. This is function is
mainly intended to be used from KVM, but can also be used from the
simulated CPUs.
Architecture specific limitations:
* LPAE is currently not supported by gem5. We therefore panic if LPAE
is enabled when returning to gem5.
* The co-processor based interface to the architected timer is
unsupported. We can't support this due to limitations in the KVM
API on ARM.
* M5 ops are currently not supported. This requires either a kernel
hack or a memory mapped device that handles the guest<->m5
interface.
Add the method checkRaw to ArmISA::Interrupts. This method can be used
to query the raw state (ignoring CPSR masks) of an interrupt. It is
primarily intended for hardware virtualized CPUs.
Add support for using the CPU cycle counter instead of a normal POSIX
timer to generate timed exits to gem5. This should, in theory, provide
better resolution when requesting timer signals.
The perf-based timer requires a fairly recent kernel since it requires
a working PERF_EVENT_IOC_PERIOD ioctl. This ioctl has existed in the
kernel for a long time, but it used to be completely broken due to an
inverted match when the kernel copied things from user
space. Additionally, the ioctl does not change the sample period
correctly on all kernel versions which implement it. It is currently
only known to work reliably on kernel version 3.7 and above on ARM.
Reduce the number of KVM->TC synchronizations by overloading the
getContext() method and only request an update when the TC is
requested as opposed to every time KVM returns to gem5.
This changeset introduces the architecture independent parts required
to support KVM-accelerated CPUs. It introduces two new simulation
objects:
KvmVM -- The KVM VM is a component shared between all CPUs in a shared
memory domain. It is typically instantiated as a child of the
system object in the simulation hierarchy. It provides access
to KVM VM specific interfaces.
BaseKvmCPU -- Abstract base class for all KVM-based CPUs. Architecture
dependent CPU implementations inherit from this class
and implement the following methods:
* updateKvmState() -- Update the
architecture-dependent KVM state from the gem5
thread context associated with the CPU.
* updateThreadContext() -- Update the thread context
from the architecture-dependent KVM state.
* dump() -- Dump the KVM state using (optional).
In order to deliver interrupts to the guest, CPU
implementations typically override the tick() method and
check for, and deliver, interrupts prior to entering
KVM.
Hardware-virutalized CPU currently have the following limitations:
* SE mode is not supported.
* PC events are not supported.
* Timing statistics are currently very limited. The current approach
simply scales the host cycles with a user-configurable factor.
* The simulated system must not contain any caches.
* Since cycle counts are approximate, there is no way to request an
exact number of cycles (or instructions) to be executed by the CPU.
* Hardware virtualized CPUs and gem5 CPUs must not execute at the
same time in the same simulator instance.
* Only single-CPU systems can be simulated.
* Remote GDB connections to the guest system are not supported.
Additionally, m5ops requires an architecture specific interface and
might not be supported.
Add the options 'panic_on_panic' and 'panic_on_oops' to the
LinuxArmSystem SimObject. When these option are enabled, the simulator
panics when the guest kernel panics or oopses. Enable panic on panic
and panic on oops in ARM-based test cases.
Previously, nextCycle() could return the *current* cycle if the current tick was
already aligned with the clock edge. This behavior is not only confusing (not
quite what the function name implies), but also caused problems in the
drainResume() function. When exiting/re-entering the sim loop (e.g., to take
checkpoints), the CPUs will drain and resume. Due to the previous behavior of
nextCycle(), the CPU tick events were being rescheduled in the same ticks that
were already processed before draining. This caused divergence from runs that
did not exit/re-entered the sim loop. (Initially a cycle difference, but a
significant impact later on.)
This patch separates out the two behaviors (nextCycle() and clockEdge()),
uses nextCycle() in drainResume, and uses clockEdge() everywhere else.
Nothing (other than name) should change except for the drainResume timing.
This patch is based on http://reviews.m5sim.org/r/1474/ originally written by
Mitch Hayenga. Basic block vectors are generated (simpoint.bb.gz in simout
folder) based on start and end addresses of basic blocks.
Some comments to the original patch are addressed and hooks are added to create
and resume from checkpoints based on instruction counts dictated by external
SimPoint analysis tools.
SimPoint creation/resuming options will be implemented as a separate patch.
Newer core tiles / daughterboards for the Versatile Express platform have an
HDLCD controller that supports HD-quality output. This patch adds an
implementation of the controller.
This changeset adds support for forwarding arguments to the PC
event constructors to following methods:
addKernelFuncEvent
addFuncEvent
Additionally, this changeset adds the following helper method to the
System base class:
addFuncEventOrPanic - Hook a PCEvent to a symbol, panic on failure.
addKernelFuncEventOrPanic - Hook a PCEvent to a kernel symbol, panic
on failure.
System implementations have been updated to use the new functionality
where appropriate.
This change fixes the switcheroo test that broke earlier this month. The code
that was checking for the pipeline being blocked wasn't checking for a pending
translation, only for a icache access.
Without loading weak symbols into gem5, some function names and the given PC
cannot correspond correctly, because the binding attributes of unction names
in an ELF file are not only STB_GLOBAL or STB_LOCAL, but also STB_WEAK. This
patch adds a function for loading weak symbols.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
This patch adds a missing flag to the ldr_ret_uop microop instruction.
The flag is added when the instruction is used, not directly in the
constructor of the instruction.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>"
This patch fixes two instances of incorrect use of the seekp/seekg
stream member functions. These two functions return a stream reference
(*this), and should not be compared to an integer value.
When using the o3 or inorder CPUs with many Ruby protocols, the caches may
need to forward invalidations to the CPUs. The RubyPort was instantiating a
packet to be sent to the CPUs to signal the eviction, but the packets were
not being freed by the CPUs. Consistent with the classic memory model, stack
allocate the packet and heap allocate the request so on
ruby_eviction_callback() completion, the packet deconstructor is called, and
deletes the request (*Note: stack allocating the request causes double
deletion, since it will be deleted in the packet destructor). This results in
the least memory allocations without memory errors.
When warming up caches in Ruby, the CacheRecorder sends fetch requests into
Ruby Sequencers with packet types that require responses. Since responses are
never generated for these CacheRecorder requests, the requests are not deleted
in the packet destructor called from the Ruby hit callback. Free the request.
This allows you to have (i.e.) an L2 cache that is not named "L2Cache"
but is still a GenericMachineType_L2Cache. This is particularly
helpful if the protocol has multiple L2 controllers.
When Ruby stats are printed for events and transitions, they include stats
for all of the controllers of the same type, but they are not necessarily
printed in order of the controller ID "version", because of the way the
profilers were added to the profiler vector. This patch fixes the push order
problem so that the stats are printed in ascending order 0->(# controllers),
so statistics parsers may correctly assume the controller to which the stats
belong.
When connecting message buffers between Ruby controllers, it is
easy to mistakenly connect multiple controllers to the same message
buffer. This patch prints a more descriptive fatal message than the
previous assert statement in order to facilitate easier debugging.
The cache trace variables are array allocated uint8_t* in the RubySystem and
the Ruby CacheRecorder, but the code used delete to free the memory, resulting
in Valgrind memory errors. Change these deletes to delete [] to get rid of the
errors.
Currently the commit stage keeps a local copy of the interrupt object.
Since the interrupt is usually handled several cycles after the commit
stage becomes aware of it, it is possible that the local copy of the
interrupt object may not be the interrupt that is actually handled.
It is possible that another interrupt occurred in the
interval between interrupt detection and interrupt handling.
This patch creates a copy of the interrupt just before the interrupt
is handled. The local copy is ignored.
It is possible that operating system wants to shutdown the
lapic timer by writing timer's initial count to 0. This patch
adds a check that the timer event is only scheduled if the
count is 0.
The patch also converts few of the panics related to the keyboard
to warnings since we are any way not interested in simulating the
keyboard.
Fixes a latency calculation bug for accesses during a cache line fill.
Under a cache miss, before the line is filled, accesses to the cache are
associated with a MSHR and marked as targets. Once the line fill completes,
MSHR target packets pay an additional latency of
"responseLatency + busSerializationLatency". However, the "whenReady"
field of the cache line is only set to an additional delay of
"busSerializationLatency". This lacks the responseLatency component of
the fill. It is possible for accesses that occur on the cycle of
(or briefly after) the line fill to respond without properly paying the
responseLatency. This also creates the situation where two accesses to the
same address may be serviced in an order opposite of how they were received
by the cache. For stores to the same address, this means that although the
cache performs the stores in the order they were received, acknowledgements
may be sent in a different order.
Adding the responseLatency component to the whenReady field preserves the
penalty that should be paid and prevents these ordering issues.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
There's not much to do about it other than disable the offending
warning anyway, so it's not worth terminating the build over.
Also suppress uninitialized variable warnings on gcc (happens
at least with gcc 4.4 and swig 1.3.40).
This patch solves the corner case scenario where the sendRetryEvent could be
scheduled twice, when an io device stresses the IOcache in the system. This
should not be possible in the cache system.
This patch splits the retryList into a list of ports that are waiting
for the bus itself to become available, and a map that tracks the
ports where forwarding failed due to a peer not accepting the
packet. Thus, when a retry reaches the bus, it can be sent to the
appropriate port that initiated that transaction.
As a consequence of this patch, only ports that are really ready to go
will get a retry, thus reducing the amount of redundant failed
attempts. This patch also makes it easier to reason about the order of
servicing requests as the ports waiting for the bus are now clearly
FIFO and much easier to change if desired.
This patch introduces a variable to keep track of the retrying port
instead of relying on it being the front of the retryList.
Besides the improvement in readability, this patch is a step towards
separating out the two cases where a port is waiting for the bus to be
free, and where the forwarding did not succeed and the bus is waiting
for a retry to pass on to the original initiator of the transaction.
The changes made are currently such that the regressions are not
affected. This is ensured by always prioritizing the currently
retrying port and putting it back at the front of the retry list.
This patch adds an optional generic 64-bit identifier field to the
packet trace. This can be used to store the sequential number of the
instruction that gave rise to the packet, thread id, master id,
"sub"-master within a larger module etc. As the field is optional it
has a marginal cost if not used.
This patch adds an optional flags field to the packet trace to encode
the request flags that contain information about whether the request
is (un)cacheable, instruction fetch, preftech etc.
