src/python/m5/objects/BaseCPU.py:
Make mem parameter a MemObject, not just a PhysicalMemory
Fix a reference not using self
tests/configs/simple-atomic.py:
Set the mem paramter
tests/configs/simple-timing.py:
Set the mem parameter
--HG--
extra : convert_revision : 6bd9df36831a1c5bafc9e88ab945c2ebe91db785
Kinda port DRAM to new memory system. The code is *really* ugly (not my fault) and right now something about the stats it uses
causes a simulator segfault.
src/SConscript:
Add dram.cc to sconscript
src/mem/physical.cc:
src/mem/physical.hh:
Add params struct to physical memory, use params, make latency function be virtual
src/python/m5/objects/PhysicalMemory.py:
Add DRAMMemory python class
--HG--
extra : convert_revision : 5bd9f2e071c62da89e8efa46fa016f342c01535d
src/arch/alpha/regfile.hh:
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/int_regfile.hh:
src/arch/mips/regfile/misc_regfile.hh:
src/cpu/exetrace.hh:
Added functions to start to support dumping register values once per cycle.
src/cpu/exetrace.cc:
Added some code to support printing the value of registers after each cycle.
src/python/m5/main.py:
Options to turn on output after every instruction. They are commented out.
--HG--
extra : convert_revision : 168a48a6b98ab6be412a96bdee831c71906958b0
configs/common/FSConfig.py:
Clean up some code to make functions look less like classes. Also put makeList function (formerly listWrapper) into m5 itself.
configs/test/fs.py:
Update for changed code.
src/python/m5/__init__.py:
Put makeList into m5.
--HG--
extra : convert_revision : 731806a7486f9abf986f52926126df666b024b1d
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge
configs/test/fs.py:
Hand merge.
--HG--
extra : convert_revision : 78f7c46084f66d52ddfe0386fd7c08de8017331e
SConstruct:
Include an option to specify the CPUs being tested.
src/cpu/SConscript:
Checker isn't SMT right now, so don't do SMT tests with the O3CPU if we're using the checker.
src/python/m5/objects/O3CPU.py:
Include default options. Unfortunately FullO3Config.py is still needed because it specifies which FUPool is being used.
tests/SConscript:
Several minor updates (sorry for one commit). Updated the copyright and fixed some m5 style issues. Also added the ability to specify which CPUs to run the tests on.
--HG--
extra : convert_revision : b0b801115705544ea02e572e31314f7bb8b5f0f2
src/python/m5/objects/Device.py:
src/python/m5/objects/Pci.py:
Change the default here to a latency rather than a Tick
--HG--
extra : convert_revision : b9366dd89646cea27a836baf249ac2da38c1809f
src/cpu/checker/cpu.hh:
Don't count checker's instructions towards total instructions committed.
src/python/m5/objects/Root.py:
Set default clock to 1 THz.
--HG--
extra : convert_revision : 0b5eaa197c860c361a3b00087e45ddc249ff1918
src/python/m5/config.py:
Formatting.
src/python/m5/main.py:
Slightly more useful output when you don't enter in a valid script file.
--HG--
extra : convert_revision : 5a71a6c94dbedeb000f83f57b0b575c2df924509
update scripts acordingly
configs/test/SysPaths.py:
new syspaths from nate, this one allows you to set script, binary, and disk paths like
system.dir = 'aouaou' in your script
configs/test/fs.py:
update for system mem_mode
Put small checkpoint example
Make clock 1THz
configs/test/test.py:
src/arch/alpha/freebsd/system.cc:
src/arch/alpha/linux/system.cc:
src/arch/alpha/system.cc:
src/arch/alpha/tru64/system.cc:
src/arch/sparc/system.cc:
src/python/m5/objects/System.py:
src/sim/system.cc:
src/sim/system.hh:
update for system mem_mode
src/dev/io_device.cc:
Use time returned from sendAtomic to delay
--HG--
extra : convert_revision : 67eedb3c84ab2584613faf88a534e793926fc92f
States are now running, draining, or drained. memory state information moved into system object
system parameter is not fs only for cpus
Implement drain() support in devices
Update for drain() call that returns number of times drain_event->process() will be called
Break O3 CPU! No sense in putting in a hack change that kevin is going to remove in a few minutes i imagine
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
Since se mode has a system, allow access to it
Verify that the atomic cpu is connected to an atomic system on resume
src/cpu/simple/base.cc:
Since se mode has a system, allow access to it
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Update for new drain() call that returns number of times drain_event->process() will be called and memory state being moved into the system
Since se mode has a system, allow access to it
Verify that the timing cpu is connected to an timing system on resume
src/dev/ide_disk.cc:
src/dev/io_device.cc:
src/dev/io_device.hh:
src/dev/ns_gige.cc:
src/dev/ns_gige.hh:
src/dev/pcidev.cc:
src/dev/pcidev.hh:
src/dev/sinic.cc:
src/dev/sinic.hh:
Implement drain() support in devices
src/python/m5/config.py:
Allow drain to return number of times drain_event->process() will be called. Normally 0 or 1 but things like O3 cpu or devices with multiple ports may want to call it many times
src/python/m5/objects/BaseCPU.py:
move system parameter out of fs to everyone
src/sim/sim_object.cc:
src/sim/sim_object.hh:
States are now running, draining, or drained. memory state information moved into system object
src/sim/system.cc:
src/sim/system.hh:
memory mode information now contained in system object
--HG--
extra : convert_revision : 1389c77e66ee6d9710bf77b4306fb47e107b21cf
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge
configs/test/test.py:
Hand merge.
--HG--
extra : convert_revision : e3fce9cf50a65a9400cd3ec887b13e4765274ec2
src/python/m5/objects/DiskImage.py:
src/python/m5/objects/Ethernet.py:
src/python/m5/objects/Ide.py:
src/python/m5/objects/Tsunami.py:
Push more default options to the Python object level as they are rarely changed.
--HG--
extra : convert_revision : 963eb7a34cd04529b3c5f24b92904ab725c93efb
src/python/m5/main.py:
Add a command line option to invoke pdb on your script
--HG--
extra : convert_revision : ef5a2860bd3f6e479fa80eccaae0cb5541a20b50
src/python/m5/main.py:
Don't allow interspersed arguments, it messes things up
--HG--
extra : convert_revision : 8f1bcf4391f570741d92bf5420879862a48f6016
configs/test/fs.py:
configs/test/test.py:
update for the new way that m5 deals with options
src/python/SConscript:
Compile AUTHORS, LICENSE, README, and RELEASE_NOTES into the
python stuff.
src/python/m5/__init__.py:
redo the way options work.
Move them all to main.py
src/sim/main.cc:
Migrate more functionality for main() into python.
Namely option parsing
src/python/m5/attrdict.py:
A dictionary object that overrides attribute access to
do item access.
src/python/m5/main.py:
The new location for M5's option parsing, and the main()
routine to set up the simulation.
--HG--
extra : convert_revision : c86b87a9f508bde1994088e23fd470c7753ee4c1
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/python/m5/objects/OzoneCPU.py:
Support Ron's recent port changes.
src/cpu/ozone/lw_back_end_impl.hh:
Support Ron's recent port changes. Also support handling faults in SE.
--HG--
extra : convert_revision : aa1ba5111b70199c052da3e13bae605525a69891
src/cpu/checker/cpu.hh:
Now that BaseCPU is a MemObject, the checker must define this function.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_unit.hh:
Implement getPort function so the connector can connect the ports properly.
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_unit_impl.hh:
The connector handles connecting the ports now.
src/python/m5/objects/O3CPU.py:
Add ports to the parameters.
--HG--
extra : convert_revision : 0b1a216b9a5d0574e62165d7c6c242498104d918
src/sim/main.cc:
src/sim/serialize.cc:
src/sim/serialize.hh:
Take in the directory name when checkpointing.
--HG--
extra : convert_revision : 040e828622480f1051e2156f4439e24864c38d45
src/cpu/simple/timing.cc:
Update for changed return values.
src/python/m5/__init__.py:
Loop in order to make sure all objects are really drained. Objects may become undrained as other objects become drained (e.g. a bus-bridge has a packet, while a bus is empty, and the first drain() will cause the bus-bridge to give the packet to the bus).
The only case we know every object is actually drained is if they all return immediately that they are drained.
--HG--
extra : convert_revision : 80057a1d6d30381bd0b67b23549bd202f447c5cb
Update configuration for new default responder on bus
Update to devices to handle their own pci config space without pciconfigall
Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for
Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same
bus:dev:func and interrupt
Remove pciconfigspace from pci devices, and py files
Add calcConfigAddr that returns address for config space based on bus/dev/function + offset
configs/test/fs.py:
Update configuration for new default responder on bus
src/dev/ide_ctrl.cc:
src/dev/ide_ctrl.hh:
src/dev/ns_gige.cc:
src/dev/ns_gige.hh:
src/dev/pcidev.cc:
src/dev/pcidev.hh:
Update to handle it's own pci config space without pciconfigall
src/dev/io_device.cc:
src/dev/io_device.hh:
change naming for pio port
break out recvTiming into two functions to reuse code
src/dev/pciconfigall.cc:
src/dev/pciconfigall.hh:
removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for
src/dev/pcireg.h:
add a max size for PCI config space (per PCI spec)
src/dev/platform.cc:
src/dev/platform.hh:
remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same
bus:dev:func and interrupt
src/dev/sinic.cc:
remove pciconfigspace as it's no longer a needed parameter
src/dev/tsunami.cc:
src/dev/tsunami.hh:
src/dev/tsunami_pchip.cc:
src/dev/tsunami_pchip.hh:
add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec)
src/mem/bus.cc:
src/mem/bus.hh:
src/python/m5/objects/Bus.py:
add idea of default responder to bus
src/python/m5/objects/Pci.py:
add config port for pci devices
add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec)
--HG--
extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
src/python/m5/config.py:
Invert the return value.
src/sim/sim_object.cc:
Invert the return value of drain.
src/sim/sim_object.hh:
Change the return value of drain.
--HG--
extra : convert_revision : 41bb122c6f29302d8b3815d7bd6a2ea8fba64df9
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge
src/base/traceflags.py:
src/cpu/SConscript:
Hand merge.
src/cpu/o3/alpha/params.hh:
Hand merge. This needs to get changed.
--HG--
rename : src/cpu/o3/alpha_cpu_builder.cc => src/cpu/o3/alpha/cpu_builder.cc
rename : src/cpu/o3/alpha_params.hh => src/cpu/o3/alpha/params.hh
rename : src/python/m5/objects/AlphaO3CPU.py => src/python/m5/objects/O3CPU.py
extra : convert_revision : 581f338f5bce35288f7d15d95cbd0ac3a9135e6a
src/cpu/o3/alpha_cpu_builder.cc:
src/cpu/o3/alpha_params.hh:
Add in dispatchWidth, wbWidth, wbDepth parameters. wbDepth is the number of cycles of wbWidth instructions that can be buffered.
src/cpu/o3/iew.hh:
Include separate parameter for dispatch width.
Also limit the number of outstanding writebacks so the writeback buffer isn't overflowed. The IQ must make sure with the IEW stage that it can issue instructions prior to issuing.
src/cpu/o3/iew_impl.hh:
Include separate parameter for dispatch width.
Also limit the number of outstanding writebacks so the writeback buffer isn't overflowed.
src/cpu/o3/inst_queue_impl.hh:
IQ needs to check with the IEW to make sure it can issue instructions, and increments the IEW wb counter each time there is an outstanding instruction that will writeback.
src/cpu/o3/lsq_unit_impl.hh:
Be sure to decrement the writeback counter if there's a squashed load that returned.
src/python/m5/objects/AlphaO3CPU.py:
Change the parameters to include dispatch width, writeback width, and writeback depth.
--HG--
extra : convert_revision : 31c8cc495273e3c481b79055562fc40f71291fc4
Edit Test3 for newmem
src/base/traceflags.py:
Add O3CPU flag
src/cpu/base.cc:
for some reason adding a BaseCPU flag doesnt work so just go back to old way...
src/cpu/o3/alpha/cpu_builder.cc:
Determine number threads by workload size instead of solely by parameter.
Default SMT fetch policy to RoundRobin if it's not specified in Config file
src/cpu/o3/commit.hh:
only use nextNPC for !ALPHA
src/cpu/o3/commit_impl.hh:
add FetchTrapPending as condition for commit
src/cpu/o3/cpu.cc:
panic if active threads is more than Impl::MaxThreads
src/cpu/o3/fetch.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/rob.hh:
src/cpu/o3/rob_impl.hh:
name stuff
src/cpu/o3/fetch_impl.hh:
fatal if try to use SMT branch count, that's unimplemented right now
src/python/m5/config.py:
make it clearer that a parameter is not valid within a configuration class
--HG--
extra : convert_revision : 55069847304e40e257f9225f0dc3894ce6491b34
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-o3
--HG--
extra : convert_revision : 3c1405d8b4831c6240e02ba65a72043ca55f4a46
Use O3CPU when building instead of AlphaO3CPU.
I could use some better python magic in the cpu_models.py file!
AUTHORS:
add middle initial
SConstruct:
change from AlphaO3CPU to O3CPU
src/cpu/SConscript:
edits to build O3CPU instead of AlphaO3CPU
src/cpu/cpu_models.py:
change substitution template to use proper CPU EXEC CONTEXT For O3CPU Model...
Actually, some Python expertise could be used here. The 'env' variable is not
passed to this file, so I had to parse through the ARGV to find the ISA...
src/cpu/o3/base_dyn_inst.cc:
src/cpu/o3/bpred_unit.cc:
src/cpu/o3/commit.cc:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/decode.cc:
src/cpu/o3/fetch.cc:
src/cpu/o3/iew.cc:
src/cpu/o3/inst_queue.cc:
src/cpu/o3/lsq.cc:
src/cpu/o3/lsq_unit.cc:
src/cpu/o3/mem_dep_unit.cc:
src/cpu/o3/rename.cc:
src/cpu/o3/rob.cc:
use isa_specific.hh
src/sim/process.cc:
only initi NextNPC if not ALPHA
src/cpu/o3/alpha/cpu.cc:
alphao3cpu impl
src/cpu/o3/alpha/cpu.hh:
move AlphaTC to it's own file
src/cpu/o3/alpha/cpu_impl.hh:
Move AlphaTC to it's own file ...
src/cpu/o3/alpha/dyn_inst.cc:
src/cpu/o3/alpha/dyn_inst.hh:
src/cpu/o3/alpha/dyn_inst_impl.hh:
include paths
src/cpu/o3/alpha/impl.hh:
include paths, set default MaxThreads to 2 instead of 4
src/cpu/o3/alpha/params.hh:
set Alpha Specific Params here
src/python/m5/objects/O3CPU.py:
add O3CPU class
src/cpu/o3/SConscript:
include isa-specific build files
src/cpu/o3/alpha/thread_context.cc:
NEW HOME of AlphaTC
src/cpu/o3/alpha/thread_context.hh:
new home of AlphaTC
src/cpu/o3/isa_specific.hh:
includes ISA specific files
src/cpu/o3/params.hh:
base o3 params
src/cpu/o3/thread_context.hh:
base o3 thread context
src/cpu/o3/thread_context_impl.hh:
base o3 thead context impl
--HG--
rename : src/cpu/o3/alpha_cpu.cc => src/cpu/o3/alpha/cpu.cc
rename : src/cpu/o3/alpha_cpu.hh => src/cpu/o3/alpha/cpu.hh
rename : src/cpu/o3/alpha_cpu_builder.cc => src/cpu/o3/alpha/cpu_builder.cc
rename : src/cpu/o3/alpha_cpu_impl.hh => src/cpu/o3/alpha/cpu_impl.hh
rename : src/cpu/o3/alpha_dyn_inst.cc => src/cpu/o3/alpha/dyn_inst.cc
rename : src/cpu/o3/alpha_dyn_inst.hh => src/cpu/o3/alpha/dyn_inst.hh
rename : src/cpu/o3/alpha_dyn_inst_impl.hh => src/cpu/o3/alpha/dyn_inst_impl.hh
rename : src/cpu/o3/alpha_impl.hh => src/cpu/o3/alpha/impl.hh
rename : src/cpu/o3/alpha_params.hh => src/cpu/o3/alpha/params.hh
rename : src/python/m5/objects/AlphaO3CPU.py => src/python/m5/objects/O3CPU.py
extra : convert_revision : d377d6417452ac337bc502f28b2fde907d6b340e
Compile and initialization work, still working on functionality.
src/mem/cache/base_cache.cc:
Temp fix for cpu's use of getPort functionality. CPU's will need to be ported to the new connector objects.
Also, all packets have to have data or the delete fails.
src/mem/cache/cache.hh:
Fix function prototypes so overloading works
src/mem/cache/cache_impl.hh:
fix functions to match virtual base class
src/mem/cache/miss/miss_queue.cc:
Packets havve to have data, or delete fails
src/python/m5/objects/BaseCache.py:
Update for newmem
--HG--
extra : convert_revision : 2b6ad1e9d8ae07ace9294cd257e2ccc0024b7fcb
Key new functions that can be called on the m5 object at the python interpreter:
doQuiesce(root) - A helper function that quiesces the object passed in and all of its children.
resume(root) - Another helper function that tells the object and all of its children that the quiesce is over.
checkpoint(root) - Takes a checkpoint of the system. Checkpoint directory must be set before hand.
setCheckpointDir(name) - Sets the checkpoint directory.
restoreCheckpoint(root) - Restores the values from the checkpoint located in the checkpoint directory.
changeToAtomic(system) - Changes the system and all of its children to atomic memory mode.
changeToTiming(system) - Changes the system and all of its children to timing memory mode.
switchCpus(list) - Takes in a list of tuples, where each tuple is a pair of (old CPU, new CPU). Quiesces the old CPUs, and then switches over to the new CPUs.
src/SConscript:
Remove serializer, replaced by python code.
src/python/m5/__init__.py:
Updates to support quiescing, checkpointing, changing memory modes, and switching CPUs.
src/python/m5/config.py:
Several functions defined on the SimObject for quiescing, changing timing modes, and switching CPUs
src/sim/main.cc:
Add some extra functions that are exported to python through SWIG.
src/sim/serialize.cc:
Change serialization around a bit. Now it is controlled through Python, so there's no need for SerializeEvents or SerializeParams.
Also add in a new unserializeAll() function that loads a checkpoint and handles unserializing all objects.
src/sim/serialize.hh:
Add unserializeAll function and a setCheckpointName function.
src/sim/sim_events.cc:
Add process() function for CountedQuiesceEvent, which calls exitSimLoop() once its counter reaches 0.
src/sim/sim_events.hh:
Add in a CountedQuiesceEvent, which is used when the system is preparing to quiesce. Any objects that can't be quiesced immediately are given a pointer to a CountedQuiesceEvent. The event has its counter set via Python, and as objects finish quiescing they call process() on the event. Eventually the event causes the simulation to stop once all objects have quiesced.
src/sim/sim_object.cc:
Add a few functions for quiescing, checkpointing, and changing memory modes.
src/sim/sim_object.hh:
Add a state variable to all SimObjects that tracks both the timing mode of the object and the quiesce state of the object. Currently this isn't serialized, and I'm not sure it needs to be so long as the timing mode starts up the same after a checkpoint.
--HG--
extra : convert_revision : a8c738d3911c68d5a7caf7de24d732dcc62cfb61
src/cpu/ozone/cpu.hh:
Fixes to get OzoneCPU working in SE/FS again.
src/cpu/ozone/cpu_impl.hh:
Be sure to set up ports properly.
src/cpu/ozone/front_end.hh:
Allow port to be created without specifying its name at the beginning.
src/cpu/ozone/front_end_impl.hh:
Setup port properly, also only use checker if it's enabled.
src/cpu/ozone/lw_back_end_impl.hh:
Be sure to initialize variables.
src/cpu/ozone/lw_lsq.hh:
Handle locked flag for UP systems.
src/cpu/ozone/lw_lsq_impl.hh:
Initialize all variables.
src/python/m5/objects/OzoneCPU.py:
Fix up config.
--HG--
extra : convert_revision : c99e7bf82fc0dd1099c7a82eaebd58ab6017764d
src/python/m5/__init__.py:
Change up options. Now setting the flag enables/disables, each of which is the opposite of the default values found in the Python class.
--HG--
extra : convert_revision : 23889b89e6105a437a74906587d90ab6ba885c97
clear from the Python side that this is the
interface to C++.
src/SConscript:
main_wrap.cc -> cc_main_wrap.cc
src/python/SConscript:
src/python/m5/__init__.py:
src/sim/main.cc:
s/main/cc_main/
src/python/m5/config.py:
s/main/cc_main/
Also directly import cc_main so we don't need
to put the "m5." in front all the time.
--HG--
extra : convert_revision : 755552f70cf671881ff31e476c677b95ef12950d
that's already being used for "detailed cpu".
Needed to add extra function for user script
to pass parsed options back to m5 module.
configs/test/fs.py:
configs/test/test.py:
Call setStandardOptions().
src/python/m5/__init__.py:
Add --outdir option.
Add setStandardOptions() so user script can
pass parsed options back to m5 module.
src/sim/main.cc:
Add SWIG-wrappable function to set output dir.
--HG--
extra : convert_revision : 1323bee69ca920c699a1cd1218e15b7b0875c1e5
src/python/m5/__init__.py:
Add in some of the commonly used Trace/ExeTrace/Debug options. Not terribly clean but it works.
--HG--
extra : convert_revision : abb3cb4892512483a5031606baabf6540019233c
src/SConscript:
Split off FuncUnits from old FUPool so I'm not including encumbered code. This was all written by Steve Raasch so it's safe to include in the main tree.
src/cpu/o3/fu_pool.cc:
Include the func unit file that's not in the encumbered directory.
--HG--
extra : convert_revision : 9801c606961dd2d62dba190d13a76069992bf241
First: Rename FullCPU and its variants in the o3 directory to O3CPU to differentiate from the old model, and also to specify it's an out of order model.
Second: Include build options for selecting the Checker to be used. These options make sure if the Checker is being used there is a CPU that supports it also being compiled.
SConstruct:
Add in option USE_CHECKER to allow for not compiling in checker code. The checker is enabled through this option instead of through the CPU_MODELS list. However it's still necessary to treat the Checker like a CPU model, so it is appended onto the CPU_MODELS list if enabled.
configs/test/test.py:
Name change for DetailedCPU to DetailedO3CPU. Also include option for max tick.
src/base/traceflags.py:
Add in O3CPU trace flag.
src/cpu/SConscript:
Rename AlphaFullCPU to AlphaO3CPU.
Only include checker sources if they're necessary. Also add a list of CPUs that support the Checker, and only allow the Checker to be compiled in if one of those CPUs are also being included.
src/cpu/base_dyn_inst.cc:
src/cpu/base_dyn_inst.hh:
Rename typedef to ImplCPU instead of FullCPU, to differentiate from the old FullCPU.
src/cpu/cpu_models.py:
src/cpu/o3/alpha_cpu.cc:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_builder.cc:
src/cpu/o3/alpha_cpu_impl.hh:
Rename AlphaFullCPU to AlphaO3CPU to differentiate from old FullCPU model.
src/cpu/o3/alpha_dyn_inst.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/alpha_impl.hh:
src/cpu/o3/alpha_params.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/cpu.hh:
src/cpu/o3/decode.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/rename.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/rob.hh:
src/cpu/o3/rob_impl.hh:
src/cpu/o3/thread_state.hh:
src/python/m5/objects/AlphaO3CPU.py:
Rename FullCPU to O3CPU to differentiate from old FullCPU model.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_unit_impl.hh:
Rename FullCPU to O3CPU to differentiate from old FullCPU model.
Also #ifdef the checker code so it doesn't need to be included if it's not selected.
--HG--
rename : src/cpu/checker/o3_cpu_builder.cc => src/cpu/checker/o3_builder.cc
rename : src/cpu/checker/cpu_builder.cc => src/cpu/checker/ozone_builder.cc
rename : src/python/m5/objects/AlphaFullCPU.py => src/python/m5/objects/AlphaO3CPU.py
extra : convert_revision : 86619baf257b8b7c8955efd447eba56e0d7acd6a
Key was adding support for cloning port references (trickier than it sounds).
Got rid of class/instance thing and go back to instance cloning...
still don't allow changing SimObject parameters/children after a
class (instance) has been subclassed or instantiated (or cloned), which
should avoid bizarre unintended behavior.
configs/test/fs.py:
Add ".port" to busses to get a port reference.
Get rid of commented-out code.
src/python/m5/__init__.py:
resolveSimObject should call getCCObject() instead of createCCObject()
to avoid cycles in recursively creating objects.
src/python/m5/config.py:
Get rid of class/instance thing and go back to instance cloning.
Deep copy has to happen only on instance cloning then (and not on subclassing).
Add getCCObject() method to force creation of C++ SimObject without
recursively creating its children.
Add support for cloning port references (trickier than it sounds).
Also clean up some very obsolete comments.
src/python/m5/objects/Bridge.py:
src/python/m5/objects/Device.py:
Add ports.
--HG--
extra : convert_revision : 4816d05ead0de520748aace06dbd1911a33f0af8
into Python.
Add Port and VectorPort objects and support for
specifying port connections via assignment.
The whole C++ ConfigNode hierarchy is gone now, as are
C++ Connector objects.
configs/test/fs.py:
configs/test/test.py:
Rewrite for new port connector syntax.
src/SConscript:
Remove unneeded files:
- mem/connector.*
- sim/config*
src/dev/io_device.hh:
src/mem/bridge.cc:
src/mem/bridge.hh:
src/mem/bus.cc:
src/mem/bus.hh:
src/mem/mem_object.hh:
src/mem/physical.cc:
src/mem/physical.hh:
Allow getPort() to take an optional index to
support vector ports (eventually).
src/python/m5/__init__.py:
Move SimObject construction and port connection
operations into Python (with C++ calls).
src/python/m5/config.py:
Move SimObject construction and port connection
operations into Python (with C++ calls).
Add support for declaring and connecting MemObject
ports in Python.
src/python/m5/objects/Bus.py:
src/python/m5/objects/PhysicalMemory.py:
Add port declaration.
src/sim/builder.cc:
src/sim/builder.hh:
src/sim/serialize.cc:
src/sim/serialize.hh:
ConfigNodes are gone; builder just gets the
name of a .ini file section now.
src/sim/main.cc:
Move SimObject construction and port connection
operations into Python (with C++ calls).
Split remaining initialization operations into two parts,
loadIniFile() and finalInit().
src/sim/param.cc:
src/sim/param.hh:
SimObject resolution done globally in Python now
(not via ConfigNode hierarchy).
src/sim/sim_object.cc:
Remove unneeded #include.
--HG--
extra : convert_revision : 2fa4001eaaec0c9a4231ef6e854f8e156d930dfe
after the class has been instantiated or subclassed.
This is one of the main situations that leads to
confusing results.
configs/test/fs.py:
Clean up to avoid modifying BaseCPU after it's been subclassed.
--HG--
extra : convert_revision : 335cb87bc3b211ecc8969cfb99ffc28f62f1f877
Provide a makeClass() method to generate a new class using
a SimObject instance as a template.
All instantiation, subclassing, and class generation is done
recursively using "deep copy"-style memoization to maintain
object relationships in the face of multiple references to
shared objects/classes.
src/python/m5/multidict.py:
Rename local dict attribute from 'dict' to 'local'
for clarity.
--HG--
extra : convert_revision : 73ed6836216308709d7bb68d09f8131acd5f1822
src/python/m5/objects/FUPool.py:
src/python/m5/objects/OzoneCPU.py:
src/python/m5/objects/SimpleOzoneCPU.py:
Fix up imports (m5 namespace no longer includes m5.config).
--HG--
extra : convert_revision : 8575ef7d19ef8dfe9524723d7c4f85234d1280d2
into vm1.(none):/home/stever/bk/newmem-py
src/python/m5/__init__.py:
src/sim/syscall_emul.cc:
Hand merge.
--HG--
extra : convert_revision : e2542735323e648383c89382421d98a7d1d761bf
User script now invokes initialization and
simulation loop after building configuration.
These functions are exported from C++ to Python
using SWIG.
SConstruct:
Set up SWIG builder & scanner.
Set up symlinking of source files into build directory
(by not disabling the default behavior).
configs/test/test.py:
Rewrite to use new script-driven interface.
Include a sample option.
src/SConscript:
Set up symlinking of source files into build directory
(by not disabling the default behavior).
Add SWIG-generated main_wrap.cc to source list.
src/arch/SConscript:
Set up symlinking of source files into build directory
(by not disabling the default behavior).
src/arch/alpha/ev5.cc:
src/arch/alpha/isa/decoder.isa:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/trace/opt_cpu.cc:
src/cpu/trace/trace_cpu.cc:
src/sim/pseudo_inst.cc:
src/sim/root.cc:
src/sim/serialize.cc:
src/sim/syscall_emul.cc:
SimExit() is now exitSimLoop().
src/cpu/base.cc:
SimExitEvent is now SimLoopExitEvent
src/python/SConscript:
Add SWIG build command for main.i.
Use python/m5 in build dir as source for zip archive...
easy now with file duplication enabled.
src/python/m5/__init__.py:
- Move copyright notice back to C++ so we can print
it right away, even for interactive sessions.
- Get rid of argument parsing code; just provide default
option descriptors for user script to call optparse with.
- Don't clutter m5 namespace by sucking in all of m5.config
and m5.objects.
- Move instantiate() function here from config.py.
src/python/m5/config.py:
- Move instantiate() function to __init__.py.
- Param.Foo deferred type lookups must use m5.objects
namespace now (not m5).
src/python/m5/objects/AlphaConsole.py:
src/python/m5/objects/AlphaFullCPU.py:
src/python/m5/objects/AlphaTLB.py:
src/python/m5/objects/BadDevice.py:
src/python/m5/objects/BaseCPU.py:
src/python/m5/objects/BaseCache.py:
src/python/m5/objects/Bridge.py:
src/python/m5/objects/Bus.py:
src/python/m5/objects/CoherenceProtocol.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/DiskImage.py:
src/python/m5/objects/Ethernet.py:
src/python/m5/objects/Ide.py:
src/python/m5/objects/IntrControl.py:
src/python/m5/objects/MemObject.py:
src/python/m5/objects/MemTest.py:
src/python/m5/objects/Pci.py:
src/python/m5/objects/PhysicalMemory.py:
src/python/m5/objects/Platform.py:
src/python/m5/objects/Process.py:
src/python/m5/objects/Repl.py:
src/python/m5/objects/Root.py:
src/python/m5/objects/SimConsole.py:
src/python/m5/objects/SimpleDisk.py:
src/python/m5/objects/System.py:
src/python/m5/objects/Tsunami.py:
src/python/m5/objects/Uart.py:
Fix up imports (m5 namespace no longer includes m5.config).
src/sim/eventq.cc:
src/sim/eventq.hh:
Support for Python-called simulate() function:
- Use IsExitEvent flag to signal events that want
to exit the simulation loop gracefully (instead of
calling exit() to terminate the process).
- Modify interface to hand exit event object back to
caller so it can be inspected for cause.
src/sim/host.hh:
Add MaxTick constant.
src/sim/main.cc:
Move copyright notice back to C++ so we can print
it right away, even for interactive sessions.
Use PYTHONPATH environment var to set module path
(instead of clunky code injection method).
Move main control from here into Python:
- Separate initialization code and simulation loop
into separate functions callable from Python.
- Make Python interpreter invocation more pure (more
like directly invoking interpreter).
Add -i and -p flags (only options on binary itself;
other options processed by Python).
Import readline package when using interactive mode.
src/sim/sim_events.cc:
SimExitEvent is now SimLoopExitEvent, and uses
IsSimExit flag to terminate loop (instead of
exiting simulator process).
src/sim/sim_events.hh:
SimExitEvent is now SimLoopExitEvent, and uses
IsSimExit flag to terminate loop (instead of
exiting simulator process).
Get rid of a few unused constructors.
src/sim/sim_exit.hh:
SimExit() is now exitSimLoop().
Get rid of unused functions.
Add comments.
--HG--
extra : convert_revision : 280b0d671516b25545a6f24cefa64a68319ff3d4
src/cpu/base_dyn_inst.cc:
Delete the allocated data in destructor.
src/cpu/base_dyn_inst.hh:
Only copy the addresses if the translation succeeded.
src/cpu/o3/alpha_cpu.hh:
Return actual translating port.
Don't panic on setNextNPC() as it's always called, regardless of the architecture, when the process initializes.
src/cpu/o3/alpha_cpu_impl.hh:
Pass in memobject to the thread state in SE mode.
src/cpu/o3/commit_impl.hh:
Initialize all variables.
src/cpu/o3/decode_impl.hh:
Handle early resolution of branches properly.
src/cpu/o3/fetch.hh:
Switch structure back to requests.
src/cpu/o3/fetch_impl.hh:
Initialize all variables, create/delete requests properly.
src/cpu/o3/lsq_unit.hh:
Include sender state along with the packet. Also include a more generic writeback event that's only used for stores forwarding data to loads.
src/cpu/o3/lsq_unit_impl.hh:
Redo writeback code to support the response path of the memory system.
src/cpu/o3/mem_dep_unit.cc:
src/cpu/o3/mem_dep_unit_impl.hh:
Wrap variables in #ifdefs.
src/cpu/o3/store_set.cc:
Include to get panic() function.
src/cpu/o3/thread_state.hh:
Create with MemObject as well.
src/cpu/thread_state.hh:
Have a translating port in the thread state object.
src/python/m5/objects/AlphaFullCPU.py:
Mem parameter no longer needed.
--HG--
extra : convert_revision : a99381fb25cb183322882ce20935a6f3d1f2b64d
Use embedded zip archive to carry Python code instead
of homegrown embedded string/file mechanism.
Do argument parsing in Python instead of C++.
SConstruct:
Add Python interpreter include path & library.
Define two new simple builders which copy &
concatenate files, respectively, for use by
the Python embedded zipfile code.
src/SConscript:
Encapsulate environment creation in a function.
Add code to append Python zip archive to final executable.
Eliminate references to obsolete files.
src/python/SConscript:
Rewrite to generate embedded zip archive of Python code
(replacing old "embedded string" mechanism).
src/python/m5/__init__.py:
Move main arg-parsing loop here (out of C++ main()).
src/python/m5/config.py:
Minor fix (version incompatibility?).
src/sim/main.cc:
Invoke embedded Python interpreter to parse args
and generate config.ini, replacing C++ arg parsing code.
--HG--
extra : convert_revision : 72d21236b2bee139ff39ba4cf031a4a1f8560029
