dev/pktfifo.cc:
need to checkpoint _reserved
dev/pktfifo.hh:
When clearing, clear _reserved
size() is used for determining how many bytes are in the fifo
ready to be pulled, so we don't want to add _reserved
avail() on the other hand is used for determining how much
free space is in the fifo for adding packets.
adjust the implementation of empty() and full() to reflect this.
--HG--
extra : convert_revision : 3281972b4b70ea5833d39ae7ce1e73648b3573b0
full by adding a reserve feature to the packet fifo which allows
us to reserve space in the fifo if only part of a packet was
copied into the fifo.
dev/ns_gige.cc:
use the new reserve feature in the fifo to properly determine
when we're full. assert that adding a packet to the fifo suceeds.
dev/pktfifo.hh:
add the ability to reserve space in the fifo. This is useful for
partial writing of packets into the fifo.
--HG--
extra : convert_revision : 83f871f34fac237bb464c9513cf6490b5c62420e
are replaced by sim/stats.hh and sim/stat_control.*)
dev/ns_gige.cc:
dev/sinic.cc:
Include sim/stats.hh instead of sim/sim_stats.hh
--HG--
extra : convert_revision : 5e07932eab45ae4fb719baa4f94c5f62092a8446
doesn't have its own interrupt functions
dev/ide_ctrl.hh:
oops. we don't have our own interrupt functions anymore
we get them from the base class.
--HG--
extra : convert_revision : 3eac228ec59f4fea0b0e49f961e8b21705dee27f
to add new devices. Abstract the Platform more so that
it is unnecessary to know know platform specifics for
interrupting or translating PCI DMA addresses.
dev/ide_ctrl.cc:
convert to parameter struct for initialization
use the interrupt functions in the PciDev base class
convert from tsunami to using platform
We don't need an interrupt controller here.
dev/ide_ctrl.hh:
don't use Tsunami, use Platform
make the IdeDisk a friend so that it can access my plaform
convert to parameter struct for construction
dev/ide_disk.cc:
don't use tsunami references, but platform references
dev/ns_gige.cc:
Convert to parameter struct for initialzation. Use code in
base class for interrupts so we don't need to know anything
about the platform. Don't need an IntrControl *.
dev/ns_gige.hh:
We don't need a Tsunami * anymore
convert to a parameter struct for construction
dev/pcidev.cc:
deal with new parameter struct
dev/pcidev.hh:
- Move all of the configuration parameters into a param struct
that we can pass into the constructor.
- Add a Platform * for accessing new generic interrupt post/clear
and dma address translation fuctions
- Create functions for posting/clearing interrupts and translating
dma addresses
dev/platform.cc:
have default functions that panic on pci calls
dev/platform.hh:
don't make the pci stuff pure virtual, but rather provide
default implementations that panic. Also, add dma address
translation.
dev/tsunami.cc:
this-> isn't necessary here.
add pci address translation
dev/tsunami.hh:
implement the pciToDma address translation
--HG--
extra : convert_revision : 7db27a2fa1f1bd84704921ec7ca0280b5653c43e
all macros in ev5.hh to inline functions or constant typed
variables and make them follow our style while we're at it.
All of the stuff in this file actually belongs in the ISA
traits code, but this is a first step at getting things done
in the right manner.
arch/alpha/alpha_memory.cc:
arch/alpha/alpha_memory.hh:
arch/alpha/ev5.cc:
arch/alpha/isa_desc:
dev/ns_gige.cc:
kern/tru64/tru64_events.cc:
deal with changes in ev5.hh
arch/alpha/ev5.hh:
Macros are nasty, so let's get rid of them. Convert all
all macros to inline functions or constant typed variables.
Make them follow our style while we're at it.
All of the stuff in this file actually belongs in the ISA
traits code, but this is a first step at getting things done
in the right manner.
arch/alpha/isa_traits.hh:
move some of the ev5 specific code into the isa
arch/alpha/vtophys.cc:
base/remote_gdb.cc:
deal with isa addition
cpu/exec_context.hh:
be less isa specific and use the isa traits to figure out
what we can.
dev/alpha_console.cc:
dev/pciconfigall.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart.cc:
deal with changes in ev5.hh
I don't believe this masking is actually necessary. We should
look at removing it later.
dev/ide_ctrl.cc:
sort #includes
deal with changes in ev5.hh
--HG--
extra : convert_revision : c8a3adf0a4b1d198aefe38fc38b295abf289b08a
base/refcnt.hh:
reorganize the RefCountingPtr a little bit to make it easier
to derive from
dev/etherpkt.hh:
this doesn't belong here. use the inet.hh stuff
dev/ns_gige.cc:
dev/ns_gige.hh:
use newer features in the tcp/ip/ethernet stuff
--HG--
extra : convert_revision : 32c1953c95655c1f4c70e0d8adedfd94beead624
functions instead of preprocessor macros.
arch/alpha/vtophys.cc:
use new constants, functions and structs to clean up the
vtophys code.
arch/alpha/vtophys.hh:
Clean up a little bit and make the protypes match new changes.
base/remote_gdb.cc:
dev/ide_disk.cc:
kern/tru64/tru64_events.cc:
use new constants from isa_traits.hh instead of ones from
old pmap.h
--HG--
extra : convert_revision : 5dce34e3b0c84ba72cefca34e5999b99898edcef
never clear about whether the end of the range was inclusive
or exclusive. Make it inclusive, but also provide a RangeSize()
function that will generate a Range based on a start and a size.
This, in combination with using the comparison operators, makes
almost all usages of the range not care how it is stored.
base/range.cc:
Make the end of the range inclusive.
start/end -> first/last
(end seems too much like end() in stl)
base/range.hh:
Make the end of the range inclusive.
Fix all comparison operators so that they work correctly with
an inclusive range. Also, when comparing one range to another
with <, <=, >, >=, we only look at the beginning of the range
beacuse x <= y should be the same as x < y || x == y. (This wasn't
the case before.)
Add a few functions for making a range:
RangeSize is start and size
RangeEx is start and end where end is exclusive
RangeIn is start and end where end is inclusive
start/end -> first/last
(end seems too much like end() in stl)
dev/alpha_console.cc:
dev/baddev.cc:
dev/ide_ctrl.cc:
dev/ns_gige.cc:
dev/pciconfigall.cc:
dev/pcidev.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart.cc:
Use the RangeSize function to create a range.
--HG--
extra : convert_revision : 29a7eb7fce745680f1c77fefff456c2144bc3994
No more non-intuitive behavior shifts depending on whether
outputDirectory is set (at the expense of backwards compatibility).
outputDirectory is now always valid, defaults to ".".
dev/etherdump.cc:
Use makeOutputStream() to create output file.
New behavior: actually complain if dump file can't
be opened, instead of quietly ignoring the problem.
dev/etherdump.hh:
dev/simconsole.cc:
dev/simconsole.hh:
Use makeOutputStream() to create output file.
sim/builder.cc:
sim/builder.hh:
sim/main.cc:
builderStream() is now *configStream.
sim/serialize.cc:
outputDirectory is now always valid, no need to check.
sim/universe.cc:
Clean up/standardize handling of various output files.
No more non-intuitive behavior shifts depending on whether
outputDirectory is set (at the expense of backwards compatibility).
outputDirectory is now always valid, defaults to ".".
New function makeOutputStream() does "the right thing" to
associate a stream with a filename.
--HG--
extra : convert_revision : a03c58c547221b3906e0d6f55e4a569843f2d646
arch/alpha/vtophys.cc:
PGOFSET -> ALPHA_PGOFSET to avoid include file problems
base/callback.hh:
Added a class to create a callback from a function
base/intmath.hh:
make FloorLog2 inlined
dev/pcidev.cc:
more work in getting pciconfig space happy with different endiannesses
dev/uart.cc:
used an incorrect size for write uint64_t instead of uint8_t
sim/system.cc:
when writing things into system data structures we need to pay
attention to endianness
--HG--
extra : convert_revision : 52f441b5789c45db30ef2f6fd4975cbc7323a381
base/inet.hh:
add functions to the various headers to grab the most common
encapsulated protocols. This could easily get out of hand, but
we're just worrying about tcp, udp, and ip for now.
add common functions size(), bytes(), and payload() to all wrappers.
size() gets the header size
bytes() returns a uint8_t * to the beginning of the header
payload() returns a uint8_t * to the beginning of the payload.
dev/etherpkt.cc:
dev/etherpkt.hh:
don't cache pointers to headers. It's probably not worth the
hassle.
--HG--
extra : convert_revision : ba9df85ac019b8a48233042dde79fb9da9546410
libdnet when we can instead of our own home grown stuff.
SConscript:
separate the crc code into its own file
base/inet.cc:
move the crc stuff to crc.cc
add generic code for calculating ip/tcp/udp checksums
base/inet.hh:
- move crc stuff to crc.hh
- #include all of the libdnet stuff. (this makes base/inet.hh the
only file you need to include if you want to use this kind of stuff.)
- Wrap some of the libdnet structs to get easier access to structure
members. These wrappers will automatically deal with masking/shifting/
byte-swapping.
base/refcnt.hh:
If one derives from RefCountingPtr, they should have access to
the internal data pointer.
build/SConstruct:
make #include of dnet stuff work
dev/etherlink.cc:
dev/ethertap.cc:
dev/ethertap.hh:
EtherPacket -> PacketData
dev/etherpkt.cc:
EtherPacket -> PacketData
add a function for populating extra info about a packet.
Basically just gives pointers to ethernet/ip/tcp/udp headers
if they exist.
dev/etherpkt.hh:
EtherPacket -> PacketData
remove most of the packet header stuff from teh PacketData
class and just add a few generic functions for grabbing various
headers that may exist in the packet. The old functionality is
contained in the headers.
dev/ns_gige.cc:
- IP -> Ip, UDP -> Udp, TCP ->Tcp when used in variable names
- get rid of our own byte swapping functions.
- whack checksum code and use libdnet version.
- Get pointers to the various packet headers and grab info from
those headers. (The byte swapping in the headers now.)
- Add stats for Udp Checksums
dev/ns_gige.hh:
use libdnet for checksum code.
IP -> Ip, TCP -> Tcp in variable names
add stats for UDP checksums
--HG--
extra : convert_revision : 96c4160e1967b7c0090acd456df4a76e1f3aab53
dev/tsunami_cchip.cc:
updates to ipi handling chipset code
sim/system.cc:
debugSymbolTable, now has symbols from pal, console, and linux
--HG--
extra : convert_revision : c981d857f7e3d75f4c46172809e6d14e5f0a1238
dev/ns_gige.cc:
clean up the interrupt handling code so that it is simpler and
less prone to bugs. I hope I removed the bug where the:
assert(intrTick >= curTick || intrTick == 0); would get triggered.
I'm pretty sure that was due to intrTick not being cleared when
the interrupt was cleared.
This code probably still needs to be looked at more closely to
make sure interrupts are not missed.
--HG--
extra : convert_revision : 61e2eb043540f2534a80c9b633006a71e7d6e282
dev/ns_gige.cc:
Clean up the interrupt code. Do a better job determining when
coalescing should happen.
Remove some bogus comments
Stop using magic numbers in initialization and comment what
the various numbers do
dev/ns_gige_reg.h:
#define describing which interrupts cannot be delayed and
which interrrupts we don't implement
--HG--
extra : convert_revision : eb196afa0bf448e1849dd2bd30dde32134effee7
dev/ns_gige.cc:
Make all DPRINTF statements take one line. If they need two lines,
break them up into separate statements. This makes grep much more
effective since *every* line will be prefixed by the cycle that the
trace message is from and the object that caused the message.
normalize some debugging statements so that searching is easier
(e.g. always say rxState, not rx state or receive state)
break into the debugger when a packet is dropped since we don't really
like dropping packets.
--HG--
extra : convert_revision : 9cf309ca2143a6b8c8215ac5dd6a31aae60173cd
whether or not the state machine is enabled rather than tracking the
specific instance of trying to halt the state machine.
dev/ns_gige.cc:
change back to tracking the state machine's enableness instead of
whether or not it is trying to halt. Also fix a major bug that
would cause the NIC to drop packets when the rx state machine was
idle, but enabled.
Fix a couple other bugs in the state machine where the idle interrupt
would happen at the wrong time.
Add a warning to deal with improper values of intrTick
dev/ns_gige.hh:
We need to keep track of whether the state machine is enabled
or not separately from the control register since the bits don't
always reflect the truth.
--HG--
extra : convert_revision : 20056b225fa62a0744473babfd693506aa5f29b2
machine too. The fifo may have been full and we want
to get another packet into it if we can.
--HG--
extra : convert_revision : 8f57294bd18f5eccb900118f2de83a4ccfd20dbb
and actually default to only storing a max of 96 bytes per
packet since that should be plenty to fit all of the headers in.
--HG--
extra : convert_revision : 0c4a6571d80536477ed166e695d957e39da0334e
argh!
dev/ns_gige.cc:
Exit the state machine so that we don't come right back where
we started and enter an infinite loop.
--HG--
extra : convert_revision : a5f2b5b5a692de6c80e4b02d7f9bc5d27fe17252
ticks for the most commonly accessed devices.
dev/baddev.cc:
Get rid of the constant cache access latency.
For unimportant devices, don't add any latency.
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ns_gige.cc:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
dev/uart.cc:
dev/uart.hh:
make the cache access latency a parameter that is based on bus
ticks.
dev/io_device.cc:
dev/io_device.hh:
add an io latency variable
dev/ns_gige.hh:
this moved to io_device.hh
--HG--
extra : convert_revision : 4883130feeaef48abee492eddf0b8eb40eb94789
dev/ns_gige.cc:
make tx/rx fifo sizes a param. the default is 128K for each. also, make the state machine not move onto txFragRead if there is no room in the txfifo for data.
dev/ns_gige.hh:
make tx/rx fifo size a param
--HG--
extra : convert_revision : ed91eb31c2b21d4cdc6de87d8641df6197be5209
second translation (which is superfluous) doesn't work properly when
system memory is higher than 128MB
--HG--
extra : convert_revision : 9cdf6925689d376953b1aa071bcd1e2f06419202
dev/ns_gige.cc:
tell all outgoing dma events that this request is from the NIC
--HG--
extra : convert_revision : 62af17a2728a0ff729e7723dc29bd0d130ca5fe3
dev/ns_gige.cc:
transmit side checksum offloading doesn't need pseudo header generation, it just takes the pseudo header checksum and uses it.
--HG--
extra : convert_revision : 9741bd650415c18ed37b06a453b23610d028135b
Both rx/tx interrupts are now scheduled for the future to give the
linux kernel time to get out of its loop.
--HG--
extra : convert_revision : 8fee0a25fde0ce0545c924f8547bed460602e006
base/loader/elf_object.cc:
EM_ALPHA value isn't official, so perhaps we shouldn't use it
dev/alpha_console.cc:
dev/alpha_console.hh:
this change allows the use of old console code
--HG--
extra : convert_revision : cfacd64ae7fd2595158ca1a83ebcdb66ee7e119b
base/traceflags.py:
removed TsunamiUart/TlaserUart and added a plain Uart
dev/alpha_console.cc:
updated for new simconsole
dev/platform.hh:
added a uart member to platform
dev/simconsole.cc:
dev/simconsole.hh:
removed lots of legacy code, it should all be ours now.
converted tabs to 8 spaces
added our copyright
dev/tsunami.cc:
uses simconsole.hh rather than console.hh
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
never needed console.hh
dev/tsunami_io.hh:
this does need eventq.hh and it just happend to be working whenn console.hh was
included everywhere
dev/tsunamireg.h:
added a couple more 8250/16550 uart defines
dev/uart.cc:
new uart code, rewritten to support both tlaser and tsunami (both a 8250 and 8530
uart).
dev/uart.hh:
updated for new uart, legacy code removed
--HG--
rename : dev/console.cc => dev/simconsole.cc
rename : dev/console.hh => dev/simconsole.hh
rename : dev/tsunami_uart.cc => dev/uart.cc
rename : dev/tsunami_uart.hh => dev/uart.hh
extra : convert_revision : e663352d49d4c2d3c95643030cf73c0e85ba2f08
base/intmath.hh:
only need FloorLog2(size_t) on a mac, so ifdefed for this
dev/alpha_console.cc:
Actually allocate the alphaAccess struct.
--HG--
extra : convert_revision : 1f50b1a025c8ee728a9f3d2c603ea38347234f54
dev/alpha_console.cc:
rather than acessing a byte array for alpha access, access the members
**this requires an updated console**
dev/pcidev.cc:
correctly type all the pci data and store in in little endian no
matter what system we are on
dev/tsunami_uart.cc:
correct a bug with the data type.
kern/linux/linux_system.cc:
system type in hwprb needs to be endian happy as well.
--HG--
extra : convert_revision : 8de9bb69365b5d30fceaf4fa342a1639f92d7a83
base/traceflags.py:
added some more traceflags for ethernet to break it up better
dev/etherpkt.hh:
since we are not network host order, must reverse bytes for these typechecks.
also, overload isTcp/UdpPkt to take an argument so you don't have to reget the ip header if you've already got one.
dev/ns_gige.cc:
1) add some functions that reverse Endianness so we can generate adn evaluate checksum adn dprintf data accurately/more understandably
2) forget about the implementation of fifo fill/drain thresholds, it's not used by the driver much, nor does it matter with use sending/receiving in whole packets anyway.
get rid of teh associated variables.
3) get rid of txFifoCnt the variable, it's redundant and unnecessary, just use txFifoAvail.
4) change io_enable to ioEnable, just to be picky.
5) modify some DPRINTF's to be clearer, also added a lot, and spread them into better traceflag categories
6) fix the device bug! it's the intrTick = 0 at teh beginning of cpuInterrupt().
7) clear some bools in regsReset() so they don't holdover wrong state
8) fix pseudo header generation for Tcp checksumming to account for network order
dev/ns_gige.hh:
change io_enable to ioEnable, get rid of fill/drain thresh related variables and txFifoCnt, which is redundant
--HG--
extra : convert_revision : c538b75731f3c9e04354f57e6df9a40aeca5096d
base/inifile.cc:
Added mac os support and fixed a bug, on error we need to exit the
child process not return
base/intmath.hh:
gcc on macos wanted a seperate function for the size_t type
base/loader/elf_object.cc:
I'm not sure why this works under linux because it seems to return
the wrong value.
base/stats/text.cc:
added define/include for mac os x
cpu/exec_context.hh:
cpu/simple_cpu/simple_cpu.cc:
added endian conversion code
dev/alpha_console.cc:
rather than accessing a charecter array of varying size depending on
the access, lets actually do this properly.
dev/alpha_console.hh:
get rid of now nolonger used consoleData
dev/disk_image.cc:
We have to byte swap the data is some cases, added function to do that
dev/ethertap.cc:
added preproc directive for mac os
--HG--
extra : convert_revision : 2b5685765cfa2844926d7397f363d2788e3d640a
tests
dev/ide_ctrl.cc:
Formatting
dev/ide_disk.cc:
Remove some junk, add an assert to serialize, and add missing serialize
for command register.
--HG--
extra : convert_revision : 8f99857e32f278dd4e6f23deffc8047c6411d5b2
dev/ide_ctrl.cc:
generalize these #defs
dev/ide_ctrl.hh:
put these in pcireg.h
dev/ns_gige.cc:
do i need io_enable? and assert will fail if i actually need to implement it, which may give clue as to wehtehr i need to implmeent the mem_enable and bm_enable stuff.
dev/ns_gige.hh:
implement this in case it's needed
dev/pcireg.h:
put these defs in pcireg instead
--HG--
extra : convert_revision : 5e3581b5da17410f943907139bd479f15d2231e8
dev/ns_gige.cc:
fix serialization and move regsReset into the cc file
dev/ns_gige.hh:
put regsReset into cc instead of here in hh
--HG--
extra : convert_revision : 3a8796fa583e0765503104a9dbe28cc69f1a8fa9
busbridges. Also small fix for gcc 3.3.3.
dev/etherpkt.hh:
Gcc 3.3.3 wants assert.h to be include in this file.
dev/ide_ctrl.cc:
after unserialization we need to tell the busbridges what addresses to
respond to.
--HG--
extra : convert_revision : a421197a5be07761bdef571d0a9406d77788e270
3) add some new functions to etherpkt. 4) checkin the nice ping_linux.ini that i've been using.
dev/etherpkt.hh:
remove the packet headers nate hated so much.
also add some new functionality regarding packets, like isIpHdr(), etc.
dev/ns_gige.cc:
improve the code given the nice new functions offered in etherpkt
--HG--
extra : convert_revision : 2e27f5a8dca5323c0fa22d3c51af44a35f6be1a2
and started cleaning up config files.
arch/alpha/isa_desc:
Made implementation of cttz and ctlz more compact
base/remote_gdb.cc:
Added comment about PALcode debugger accesses
dev/baddev.cc:
dev/baddev.hh:
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
dev/tsunami_uart.cc:
dev/tsunami_uart.hh:
Cleaned up includes and changed device from FunctionalMemory to
PioDevice for detailed boot
dev/ns_gige.cc:
The ethernet dev uses two BARs, and the first bars size was being set
incorrectly.
dev/tsunamireg.h:
I don't know why we were using the superpage as the PCI memory addr.
Changed and works correctly with detailed boot.
--HG--
extra : convert_revision : b535e76612cb90b544305dc1aa8c5e0e774564bd
dev/tsunami_io.cc:
Timers don't need to be rescheduled cause they aren't scheduled by
the default constructor
--HG--
extra : convert_revision : afb68e4f0c4e2a2c98f0037e061752690080a503
dev/ide_ctrl.cc:
Properly serialize/unserialize the PciDev base class to get it to remap
the MMU
dev/ns_gige.cc:
dev/ns_gige.hh:
Remove the "addr" paramter from the constructor and change the device
to use PCI based MMU mappings only
dev/pciconfigall.cc:
Change comments
dev/pcidev.cc:
Properly setup the MMU after a serialize
--HG--
extra : convert_revision : 4b2e7ba58e3c24fac1ff6f80635e704d6ecc0eff
Linux 2.6 with DMA support
dev/ide_disk.cc:
Add debug infomation for DMA transfers and fix handling of PRD pointer
values
dev/ide_disk.hh:
Reduce buffer (MAX_DMA) size to 64K
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
Add handling of PCTL register and also fix the translate from PCI to DMA
addresses which was incorrect
--HG--
extra : convert_revision : 562f55fa1c7099ad0f5a23f59dec2c8ec7601d43
virtual function in alphaaccess.cc
dev/alpha_console.cc:
dev/alpha_console.hh:
dev/platform.hh:
dev/tsunami.cc:
dev/tsunami.hh:
dev/tsunami_io.hh:
Removed dynamic cast to get interrupt frequency and replaced with a
virtual function
--HG--
extra : convert_revision : 01f514a33d8f76c6527ab25a713d5c86f9fd646e
PIO writes. This was mainly related to not shadowing the status register
properly, and also not setting some of the status bits expected by the
operating system for the PIO write protocol.
--HG--
extra : convert_revision : fcdfd588be6e4f237aa6057889f0b3bdf4ea7631
dev/tsunami_cchip.hh:
clean up some comments
kern/linux/linux_syscalls.cc:
Cleaned up spacing of syscall numbers
kern/linux/linux_system.hh:
Added doxygen comments
--HG--
extra : convert_revision : 23ecdaa92a208458dd5c5d3c68ac9012ce2690da
dev/baddev.hh:
dev/pcidev.hh:
dev/tsunami.hh:
dev/tsunami_cchip.hh:
dev/tsunami_io.hh:
dev/tsunami_pchip.hh:
Added doxygen comments
dev/pciconfigall.hh:
Added doxygen comments. Made the hlist of devices private and provided
members to modify the data.
dev/pcidev.cc:
updated for change in pciconfigall
dev/tsunami_pchip.cc:
Deleted commented out code we don't need
kern/linux/linux_syscalls.cc:
Simplified the number -> name conversion.
kern/linux/linux_syscalls.hh:
Removed StandardNumber and replaced with Number.
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
LinuxSkipIdeDelay50msEvent was simply the same as the SkipFunc event,
so I removed it. Same with with LinuxSkipFuncEvent.
--HG--
extra : convert_revision : 1508c335f87d90373f5772f3a0407ea13e858d7e
Removed bootloader and just wrote command line into linux kernel
base/inifile.cc:
the forked process should not return, it should exit.
dev/tsunami_uart.cc:
dev/tsunami_uart.hh:
The serial port in reality has some delay and linux expects it. This
schedules an interrupt 300 cycles after the transmit instead of
immediately
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
removed boot loader and stuck boot command line in the kernel manually
--HG--
extra : convert_revision : 68aa54f8ca4e8391789f7a4c1ae227e6f8b94e13
dev/ns_gige.cc:
remove some useless DPRINTF's and add some useful ones. fix the missing RXDESC interrupt.
--HG--
extra : convert_revision : 17142480db1eaafa24f88640f8c7b8e7e077de1a
dev/ide_disk.cc:
Fix to PIO writes and also add command needed for shutdown
dev/pcidev.cc:
Change the panic on write to read-only registers to a debug print. The
kernel tries to write back over all of the PCI registers to restore
the saved SRM state, so we need to let it do this without panicing.
sim/system.cc:
Add back increment of number of running systems to allow trap of halt
work correctly.
--HG--
extra : convert_revision : 84aba4effbec14545f3610c19a8e321d7e7f7cf2
doesn't conflict with the old ethernet driver name.
Added config file to try to boot Tru64 with Tsunami
Cleaned up kern/linux a bit more and fixed bug where we were using
Tru64 system calls
dev/ns_gige.cc:
dev/ns_gige.hh:
dev/tsunami.hh:
Changed name of lisa's device to NSgigE instead of Etherdev so it
doesn't conflict with the old ethernet driver name.
kern/linux/linux_syscalls.hh:
the Syscalls still used the Tru64 calls, oops.. fixed.
--HG--
extra : convert_revision : dedd20686cc367ed37f31920f753566afbc69045
if Tru64 is to continue to be supported on Turbolaser) and fixed
translation of physical addresses by clearing PA<42:35> when the real
uncachable bit (43) is set
arch/alpha/ev5.hh:
Change to support 256 ASNs and seperate VA_SPACE checks for EV5 and EV6
also add support proper translation of uncacheable physical addresses
dev/ide_ctrl.cc:
Fix to work with real address translation
--HG--
extra : convert_revision : aa3d1c284b8271d4763a8da2509c91bbcf83189a
dev/ns_gige.cc:
clear the device interrupts
dev/ns_gige_reg.h:
Add a new mask
--HG--
extra : convert_revision : ce3617315677cbee577ed8893821a8abc5a1a10d
dev/console.cc:
commented out code that checks if an interrupt is happening before issuing one
because they can get lost when linux boots
dev/console.hh:
added a setPlatform function to set the platform to interrupt
dev/platform.hh:
dev/tsunami.cc:
dev/tsunami.hh:
Added virtual functions to post console interrupts
dev/tsunami_io.cc:
allowed a 64bit read of the PIC since we can't do a physical byte read
dev/tsunami_uart.cc:
moved TsunamiUart to PioDevice
various little fixes to make linux work
dev/tsunami_uart.hh:
Made Tsunami_Uart a PIO device
dev/tsunamireg.h:
added some UART defines and used the ULL macros
kern/linux/linux_system.cc:
commented out waiting for gdb
--HG--
extra : convert_revision : 8cfd0700f3812ab349a6d7f132f85f4f421c5c5e
dev/ide_ctrl.cc:
Added serialize/unserialize functions and move some inlined functions
to regular functions
dev/ide_ctrl.hh:
Change inlined functions to regular functions
dev/ide_disk.cc:
Changes to dmaWrite and also add serialize/unserialize functions
dev/ide_disk.hh:
Support for serializing/unserializing
--HG--
extra : convert_revision : 40e016dc7f6637b033fe33409338437c985a05f4
mappings (writes still unverified, and read could probably be looked over
a bit more too)
dev/ide_disk.cc:
dev/ide_disk.hh:
Major changes to fix bogus handling of dma transfers. The read seems to
work pretty well, but the write is unverfied until we can get a disk
image that actually tries to write.
dev/tsunami_pchip.cc:
Change mask to properly mask 13 bits not 12
--HG--
extra : convert_revision : 08fe9bc32970e449cd045de479553a96a4e389d6
Added function to skip determine_cpu_caches(). We may have to update this in the
future: see note below.
arch/alpha/alpha_memory.cc:
dev/ide_ctrl.cc:
dev/tsunamireg.h:
Added ULL for 64bit ints
kern/linux/linux_system.cc:
Added a function to skip determine_cpu_caches, right now it is only used for
printing in proc, however in the future we may either want to implement the SC_CTL
IPR register or manually set alpha_l1i_cacheshape, alpha_l1d_cacheshape,
alpha_l2_cacheshape, alpha_l3_cacheshape to ((size << 10) | (linesize>>1)<<4 | way)
kern/linux/linux_system.hh:
added event to skip determine_cpu_caches()
--HG--
extra : convert_revision : 1065f2091bbe6832b730af490f5b4672c2afedce
arch/alpha/vtophys.cc:
Removed buggy code that tries to fix PAL addresses (may cause problems
while trying to debug in PAL code, but that should do this fix outside
of vtophys)
base/loader/symtab.cc:
base/loader/symtab.hh:
cpu/exetrace.cc:
Changed InstExec traces to always print a symbol name
dev/ide_ctrl.cc:
dev/ide_disk.cc:
Tabs
dev/ide_disk.hh:
Change buffer size
dev/tsunami_pchip.cc:
Fix translatePciToDma to support scatter gather mapping
kern/linux/linux_system.cc:
Force simulator to wait until remote debugger attaches (should be removed
or turned on/off with a flag)
--HG--
extra : convert_revision : 1d08aebe3f448c87a963dd613de3e2e0cff0d48d
Turbolaser)
base/range.hh:
Change semantics of range to be inclusive of the end value, may need to
check other users of range to make sure they are semantically correct.
This was needed for access of last byte in range of address on IDE and
makes sense for case of range from 0 to all f
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ide_disk.cc:
dev/ide_disk.hh:
Whole mess of changes.. at current state simulator will boot and read
partition table and then have a bunch of errors and panic
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/platform.hh:
Changes to work with platform separation
dev/tsunami.cc:
dev/tsunami.hh:
Change to work with platform separation
--HG--
extra : convert_revision : e1de22b54df7fdcf391efc2a8555ada93f46beab
base/range.hh:
andrew thought this might be a bug.
dev/etherpkt.cc:
don't need std:: since there is a using directive
dev/ns_gige.cc:
update to new PIO and PCI system
dev/ns_gige.hh:
update to deal with new PIO and PCI setup
dev/ns_gige_reg.h:
Add some new #defines that I ended up needing
dev/pcidev.cc:
some changes to the debugging printfs of pci device
--HG--
extra : convert_revision : 955ba8e8e1c418cfe1c6549dc3451ea091541556
configuration unnecessarily awkward. Biggest changes are:
- External and internal object names now match in all cases. The
macros still allow them to be different; the only reason I didn't
get rid of that is that the macros themselves should be going away
soon. In the few conflicting cases, I sometimes renamed the C++ object
and sometimes renamed the config object. The latter sets of substitions
are:
s/BaseBus/Bus/;
s/MemoryObject/FunctionalMemory/;
s/MemoryControl/MemoryController/;
s/FUPool/FuncUnitPool/;
- SamplingCPU is temporarily broken... we need to change the model
of how this works in the .ini file. Having it as a CPU proxy is
really awkward.
arch/alpha/alpha_memory.cc:
arch/alpha/alpha_memory.hh:
cpu/simple_cpu/simple_cpu.cc:
sim/process.cc:
Rename objects to match config name.
cpu/base_cpu.cc:
Uncomment SimObject define since SamplingCPU no longer
does this for us.
dev/ethertap.cc:
Use unsigned instead of uint16_t for params.
kern/tru64/tru64_system.cc:
Use unsigned instead of uint64_t for init_param param.
test/paramtest.cc:
Fix old SimObjectParam.
--HG--
extra : convert_revision : 378ebbc6a71ad0694501d09979a44d111a59e8dc
assumes that all PCI devices are DmaDevices, and if not, they can just
ignore the DMA stuff)
--HG--
extra : convert_revision : aa58b658370696674ca4c32b265bc0400e5dda5a
dev/pcidev.cc:
member variables should begin with lowercase so they don't get confused with types.
dev/pcidev.hh:
member variables must begin with lowercase so they don't get confused with types.
--HG--
extra : convert_revision : f083baa60d0fbf64d858d684ff70ee06e7b7765d
sim object(depends on which platform tsunami/tlaser is being used)
dev/alpha_console.cc:
Use dynamice casting once during build to get at the proper device to calculate the frequency.
It is either a tsunami_IO or a tlaser_clock depending on platform (tsunami/tlaser).
If the simobject is not of either of those types then panic
dev/alpha_console.hh:
Pass in a SimObject * that is to either a tlaser_clock or a tsunami_IO
sim/sim_object.cc:
Make it so that you can have a SimObjectParam of type SimObject:
example:
SimObjectParam<SimObject *> so;
--HG--
extra : convert_revision : 08239ef23762b8ea11311630b73fe885d939402e
dev/alpha_console.cc:
missed this >>>> after i merged
kern/linux/linux_system.cc:
get rid of FS_MEASURES and change FnEvent to LinuxFnEvent
kern/linux/linux_system.hh:
get rid of FS_MEASURE
--HG--
extra : convert_revision : 210f46573bba0c772a224ce110af9a9230fabf6a
delay is more or less folded into the packet time, but an additional
delay is possible representing crossing a long haul link, or some
switches, etc.
--HG--
extra : convert_revision : 8fd689c2a7e3051e77f47a4cd5f51c6999d92c8f
and a physical memory address for DMA
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
Changed registers to array and added mapping function to translate between
PCI bus space and physical address space
--HG--
extra : convert_revision : e9dc4de4e7effe8e8e2365298843d6f767b5a289
of faking it. Renamed stuff to follow our style. Lots of
general cleanup.
dev/etherpkt.hh:
fix up includes
--HG--
extra : convert_revision : fb3a21466cdae00f8747d6e3027c9f2c63569c48
are present
dev/tsunami_cchip.cc:
Only need to interrupt processors that are there
Move RTC interrupt code into a function
dev/tsunami_cchip.hh:
Make a RTC interrupt function, move variables out of public scope
dev/tsunami_io.cc:
Make a call to the RTC interrupt routine instead
--HG--
extra : convert_revision : 88113664d0e54a7dddc00ec11ff9b9d088232b31
make it so that pio devices must respond with some delay.
dev/io_device.cc:
don't forget to include dma_interface.hh so we could use it.
dev/io_device.hh:
the generic BusInterface isn't enough for doing DMA
we need the actual DMAInterface
--HG--
extra : convert_revision : 70298d33c8520a3f4ad11aa600825a8cec7e44bf
dev/etherdump.cc:
now that init is automatically called by the framework, don't
init twice.
--HG--
extra : convert_revision : 16dcdef67aa193ed71ff546e7b255d60f39bf13d
dev/tsunami_cchip.cc:
Add support for IPI, making changes to read/write to MISC register
Particularly the IPREQ, IPINTR, and ITINTR subfields
dev/tsunami_cchip.hh:
Make an array to keep track of the number of outstanding IPI's,
Extend RTC to interrupt all processors, not just cpu0
dev/tsunami_io.cc:
Extend RTC to interrupt all present proccessors, not just cpu0
--HG--
extra : convert_revision : 0715cbf0abb06002c0fb0b05ef369304cdf75001
dev/tsunami_cchip.cc:
fixed another problem with the interrupt code, should all work now
--HG--
extra : convert_revision : 1d9fe6081b6391e3e09f1c4a9380a30240fac6dc
interrupt to use a different subnumber since both devices could
interrupt at the same time and we don't want to loose one.
dev/tsunami_cchip.cc:
rewrote interrupt code to handle interrupt mask clearing correctly
dev/tsunami_cchip.hh:
changed (post/clear)DRIR to use a interrupt number rather than a vecotr
dev/tsunami_io.cc:
updated for new post/clearDRIR calls
--HG--
extra : convert_revision : 5b39f5e15a66d5eb6e689e6ece62f99b5fa735ab
arch/alpha/vtophys.cc:
base/remote_gdb.cc:
Fix to remote debugger while in PAL code
dev/pcidev.cc:
Remove extra debug printf
--HG--
extra : convert_revision : e64988846ad05cd3ddf47034d72d99dae3501591
In the future, this can be used for actual data, but for now, it's
so that devices can respond to timing accesses properly. This way,
an uncached access on a bus further away will take longer to respond.
dev/alpha_console.cc:
dev/alpha_console.hh:
suport the separate IO bus
--HG--
extra : convert_revision : ececb70f5febfd00231f6e406f93b2a79be01261
Changed base_linux.ini file to use physical addresses
dev/alpha_console.cc:
dev/pciconfigall.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
Fix masking of read/write address to get read/write offset
dev/tsunami_uart.cc:
Fix masking of read/write address to get read/write offset
Also added add_child call that was missed
dev/tsunami_uart.hh:
Changed size to 0x8
--HG--
extra : convert_revision : 1468ca43167bfb28b28c4510401a1ebad683e102
some sundry problems with new interface
dev/alpha_console.cc:
dev/alpha_console.hh:
dev/baddev.cc:
dev/baddev.hh:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/pcidev.cc:
dev/pcidev.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
dev/tsunami_uart.cc:
dev/tsunami_uart.hh:
Fixed to use new FunctionalMemory interface
--HG--
extra : convert_revision : bee98e6285d92f28fafacf919ab06eaf333a9b56
dev/pcidev.cc:
Linux 2.6 writes the latency timer, so it was added to the list of
allowable writes
dev/tsunami_uart.cc:
dev/tsunami_uart.hh:
A couple of changes so that the new linux autoconf serial driver thinks
that the serial port exists and configures it
--HG--
extra : convert_revision : 6c026ef754e31de56c9b837ceb8f6be48c8d8d9c
- Make the MemoryController use address ranges (via Range) instead
of an address and a mask
base/remote_gdb.cc:
reflect name change
dev/alpha_access.h:
better include
dev/alpha_console.cc:
- FunctionalMemory no longer takes care of mapping my address into
the proper address space. It must be done locally.
- the memory controller no longer uses a mask, but a size, and the
size is determined by the device, not the .ini file
- fix up address calculations to reflect the removal of a mask
- PhysicalMemory::getSize() -> PhysicalMemory::size()
dev/alpha_console.hh:
- FunctionalMemory no longer takes care of mapping my address into
the proper address space. It must be done locally.
- the memory controller no longer uses a mask, but a size, and the
size is determined by the device, not the .ini file
- fix up address calculations to reflect the removal of a mask
- get rid of MmapDevice and inherit from FunctionalMemory
--HG--
extra : convert_revision : e3a65c9debf6f899632d62c70781cbdc2826616b
dev/tsunami.cc:
Changed so Tsunami has a pointer to the System to which it belongs.
Now it is derived from generic base class Platform so platform stuff
can be accessed based on the system
dev/tsunami_io.cc:
dev/tsunami_io.hh:
Cleanup and added copyright
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
Added event to skip the "calibrate_delay" function, now calculate
loops_per_jiffy based on frequency, interrupt frequency, and constant
sim/system.hh:
Added pointer to generic Platform base class
--HG--
extra : convert_revision : 5bd925eec220a2ca48eb6164d2ecfdec96922c2c
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/pcidev.cc:
dev/pcidev.hh:
dev/tsunami.cc:
dev/tsunami.hh:
A bunch of changes to clean up new PCI code and to fix build
--HG--
extra : convert_revision : 71063bcc565c50fc293b323ddce2c8e701f544ff
execution pipeline (Alpha trapb & excb).
Add support for write memory barriers (mostly impacts
store buffer).
Add StaticInst flag to indicate memory barriers, though
this is not modeled in the pipeline yet.
arch/alpha/isa_desc:
Implement trapb, excb, mb, and wmb as insts with
no execution effect (empty execute() function) but
with flags that indicate their side effects.
Also make sure every instruction that needs to go to
the execute stage has a real opClass value, since we
are now using No_OpClass to signal insts that can get
dropped at dispatch.
StaticInst::branchTarget() is now a const method.
cpu/static_inst.hh:
Add flags to indicate serializing insts (trapb, excb) and
memory and write barriers.
Also declare some StaticInst methods as const methods.
dev/etherlink.hh:
sim/eventq.hh:
sim/serialize.cc:
sim/serialize.hh:
sim/sim_object.hh:
Make name() return value const.
--HG--
extra : convert_revision : 39520e71469fa20e0a7446b2e06b494eec17a02c
dev/tsunami.cc:
dev/tsunami.hh:
Change to use AdaptecController with Tsunami
--HG--
extra : convert_revision : 6ff4f9f7ae1959589340b2ab23755b4dbfec4dbc
This avoids incrementing and decrementing the MemReq
reference counters on every call and return.
arch/alpha/alpha_memory.cc:
arch/alpha/alpha_memory.hh:
cpu/exec_context.hh:
cpu/memtest/memtest.cc:
cpu/memtest/memtest.hh:
dev/alpha_console.cc:
dev/alpha_console.hh:
Change MemReqPtr parameters to references.
--HG--
extra : convert_revision : 3ba18bdd9f996563988402576bfdd3430e1ab1e5
dev/tsunami.hh:
Started commenting code
dev/tsunami_cchip.cc:
removed unneccessary config files
dev/tsunami_io.cc:
Added code to see the value written
dev/tsunami_uart.cc:
conviently one of the addresses the SuperI/O southbridge can be is the same space
as the UART. This stops the simulator from panicing although it should probably be
changed a bit.
--HG--
extra : convert_revision : a3334a2c418ee8228089d0e1791fa78bbb276fe5
special console values separately.
dev/alpha_console.cc:
use new console specific input function
--HG--
extra : convert_revision : 08997d6115d2aac3a26cac2774b3c3fc0cd76ab0
statStream catchall that we had before)
Also provide an optional output directory that multiple simulator output
files can be written to.
Make most output files use the output directory
base/misc.cc:
send warnings to the outputStream as well
base/trace.cc:
dprintf_stream defaults to cerr
dev/console.cc:
use the output directory for the console output if it exists
dev/etherdump.cc:
dump to the output directory if it exists
sim/builder.cc:
sim/builder.hh:
move constructor and destructor to .cc file
use a function to get the stream that the builder dumps its
output to, and create a separate file in the output directory
if able
sim/main.cc:
statStream -> outputStream
sim/serialize.cc:
dump checkpoints to the output directory if specified
sim/universe.cc:
provide an output stream for simulator output. (This takes place of the
statStream catchall that we had before)
Also provide an optional output directory that multiple simulator output
files can be written to.
--HG--
extra : convert_revision : 03abce20edbbf7ec19c9ddd8d69ec8485c383532
from cchip register
dev/tsunami_cchip.cc:
added support for figuring out which cpu you are
--HG--
extra : convert_revision : 7862678a259931bb0a5b2ca8ad298a704bd272ec
cpu/exetrace.cc:
added looking for symbols at PC+4 and PC+8 thanks to gcc skiping
setting the gp where it can and jumping <func>+8
dev/console.cc:
commented out weird interrupt per nate's suggestion
dev/tsunami_cchip.cc:
moved rtc flag to correct bit
dev/tsunami_io.cc:
time interrupt will be 1024Hz and at some point be configurable by
linux
dev/tsunami_io.hh:
Timer interrupt will be 1024hz for now and in the future be
configurable by linux
--HG--
extra : convert_revision : 2fcc924c8848eb3c6166d9d517617ed193a2b89a
dev/tsunami_io.cc:
PIC, PIT, RTC implementation for tsunami working so far
dev/tsunami_io.hh:
PIT, PIC, RTC implementation for tlaser working so far
dev/tsunamireg.h:
Added RTC defines
kern/linux/linux_system.cc:
wrote cycle frequency into variable so linux doesn't probe for it.
The support exists, but it takes two seconds of time to do on a real
machine, so forever in the simulator.
--HG--
extra : convert_revision : e0ed7f271ece4ed69c06af35d1b0e8ed848cd138
dev/tsunami_io.cc:
Add RTC event to change the state of a uip bit
dev/tsunami_io.hh:
Add RTC event to change state of an uip bit
--HG--
extra : convert_revision : acde7bdfe152d3e08f7ed53b4c8e910378f6ae67
dev/tsunami_io.cc:
renamed to io instead of dma since it's more than the DMA controller now
dev/tsunami_io.hh:
renamed from dma to io since it's more than dma just now
--HG--
rename : dev/tsunami_dma.cc => dev/tsunami_io.cc
rename : dev/tsunami_dma.hh => dev/tsunami_io.hh
extra : convert_revision : 4ffb69679eb7cea5725fae3446e088899f1f9315
dev/tsunami_dma.cc:
decide actually differentiating between the different i/o requests
would be a better idea
dev/tsunami_dma.hh:
added mask and mode variables, incase they are needed
dev/tsunamireg.h:
added some i/o port defs
--HG--
extra : convert_revision : 5c7a88a8f8c8725359737b399cfa80610149a5f4
dev/alpha_access.h:
removed my attempted hack to get console compling in linux
dev/tsunami.cc:
dev/tsunami.hh:
added pchip pointer to tsunami
dev/tsunami_cchip.cc:
made printing better
dev/tsunami_cchip.hh:
commented out back pointer for now, since the parser has issues with it
dev/tsunamireg.h:
added pchip registers
--HG--
extra : convert_revision : b4fceb7d08e757d9aaf37df8eb1bcd5ae29ce0da
when we are compiling the console.
base/loader/elf_object.cc:
added code to verify that the .bss section is 0;
added code to only load function and label types
dev/alpha_access.h:
include inittypes if we are compiling the console code
--HG--
extra : convert_revision : b88fb36500b1c1003d44ed95cefdd2a30b7466b8
Move global checkpoint-related functions and vars into Checkpoint class (as statics).
arch/alpha/pseudo_inst.cc:
dev/disk_image.cc:
Move global checkpoint-related functions and vars
into Checkpoint class (as statics).
sim/serialize.cc:
Move global checkpoint-related functions and vars
into Checkpoint class (as statics).
Checkpoint constructor now takes checkpoint directory name instead
of file name.
Make serialize:dir parameter actually set checkpoint directory name
instead of directory in which checkpoint directory is created. If
the value contains a '%', the curTick value is sprintf'd into the
format to create the directory name. The default is backwards compatible
with the old fixed name ("m5.%012d").
sim/serialize.hh:
Move global checkpoint-related functions and vars
into Checkpoint class (as statics).
Checkpoint constructor now takes checkpoint directory name instead
of file name.
--HG--
extra : convert_revision : d0aa87b62911f405a4f5811271b9e6351fdd9fe4
dev/alpha_access.h:
- use our standard types instead of this extra typedef
- advance the ALPHA_ACCESS version since the interface
has changed. *this means you need a new console binary*
- shuffle a couple things around to pack the data structure
a bit better
- add a placeholder for character input
dev/alpha_console.cc:
Clean up the read code path a bit and add support for character
input via the console
Clean up the write path and use a switch instead of a bunch of
if statements
--HG--
extra : convert_revision : a1a5bc8fed9ec9c4c46548fdf79604661668b81a
arch/alpha/alpha_tru64_process.cc:
So, I don't know why linux uses an off_t here.
I'm also not sure why linux defines an off_t to be a long
Let's just use long here since it works for linux, and that's
what bsd does
base/inifile.cc:
correct #include for OpenBSD
dev/disk_image.cc:
the correct type for this is streampos
--HG--
extra : convert_revision : f3ac3a3b8515d66e07ffb9780d8a9e387297b6a0
a checkpoint now gives identical results to running from scratch
and doing at switchover at the same cycle!
- CPUs start at cycle 0 again, not cycle 1.
- curTick is now serialized & unserialized.
- Stats get reset in main (before event loop). Since this is done
after curTick is unserialized, simTicks gets set correctly for
running from a checkpoint.
- Simplify serialization to happen in a single pass.
- s/Serializeable/Serializable/
arch/alpha/isa_traits.hh:
dev/etherlink.hh:
sim/eventq.cc:
sim/eventq.hh:
s/Serializeable/Serializable/
kern/tru64/tru64_system.cc:
sim/process.cc:
Make initial CPU activation on cycle 0 again (not 1).
sim/main.cc:
Reset stats before getting started.
Make error message on falling out of event loop
more meaningful.
sim/serialize.cc:
sim/serialize.hh:
Get rid of now-useless initial pass; serialization is
done in a single pass now.
Serialize & unserialize curTick.
Wrap curTick and mainEventQueue in a "globals" Serializable object.
s/Serializeable/Serializable/
sim/sim_object.cc:
Add static function to serialize all SimObjects.
sim/sim_object.hh:
Add static function to serialize all SimObjects.
s/Serializeable/Serializable/
--HG--
extra : convert_revision : 9dcc411d0009b54b8eb61c3a509680b81b9f6f68
and SimpleCPU::setStatus() into separate functions. For example,
setStatus(Active) is now activate().
--HG--
extra : convert_revision : 4392e07caf6c918db0b535f613175109681686fe
there aren't so many files littering your directory
dev/disk_image.cc:
Checkpoints now in a directory
sim/serialize.hh:
Make it so that we create a directory for each checkpoint so that
there aren't so many files littering your directory.
Remove unused variable
--HG--
extra : convert_revision : 261824eee62f7b68f6ae6e3dbd49ad5128ced148
what the console output is.
base/circlebuf.hh:
base/circlebuf.cc:
add stuff to spit to an ostream
prepend _ in front of protected member variables
formatting
dev/console.hh:
dev/console.cc:
Add DPRINTF to spit out the lines of console data
dev/console.cc:
little hack to append name() to the file so that we can
easily get multiple output files.
dev/console.hh:
TRACING_ON == 1 not defined(TRACING_ON)
--HG--
extra : convert_revision : bbe80715fb97ee4c4ed6b484955ef71289f09fc9
resetstats
dumpstats
dumpresetstats
m5checkpoint
Lots of cleanup of serialization and stats dumping/resetting to
work with these new instructions
arch/alpha/isa_desc:
Implement more m5 pseduo opcodes:
resetstats
dumpstats
dumpresetstats
m5checkpoint
All of these functions take two optional parameters, the first is a delay,
and the second is a period. The delay tells the simulator to wait the
specified number of nanoseconds before triggering the event, the period
tells the simulator to repeat the event with a specified frequency
base/statistics.cc:
base/statistics.hh:
regReset RegResetCallback
dev/disk_image.cc:
serializeFilename -> CheckpointFile()
sim/debug.cc:
Move this debugging statement to sim_stats.cc
sim/eventq.cc:
Don't AutoDelete an event if it is scheduled since the process()
function could potentially schedule the event again.
sim/main.cc:
DumpStatsEvent is now Statistics::SetupEvent(Dump, curTick)
sim/serialize.cc:
Change the serialize event so that it's possible to cause the
event to repeat. Also make the priority such that the event
happens just before the simulator would exit if both events
were scheduled for the same cycle.
get rid of the serializeFilename variable and provide a CheckpointFile()
function. This function takes a basename that is set in the
configuration, and appends the current cycle to the name so that
multiple checkpoints can be dumped from the same simulation.
Also, don't exit the simulation when a checkpoint file is dumped.
sim/serialize.hh:
serializeFilename -> CheckpointFile()
SetupCheckpoint function to tell the simulator to prepare
to checkpoint at a certain time with a certain period
sim/sim_events.cc:
DumpStatsEvent stuff gets move to sim_stats.(cc|hh)
The context stuff gets moved into the already existing
stats context in stat_context.cc
sim/sim_events.hh:
DumpStatsEvent stuff gets move to sim_stats.(cc|hh)
sim/universe.cc:
Provide some simple functions for converting times into
ticks. These use floating point math to get as close as
possible to the real values. Multipliers are set up ahead
of time
--HG--
extra : convert_revision : d06ef26a9237529a1e5060cb1ac2dcc04d4ec252
dev/disk_image.cc:
seperate serialization output files for different cow images
--HG--
extra : convert_revision : b62551f8e3f6315bb92ae3cb44e077d8084cbfe7
