Commit graph

676 commits

Author SHA1 Message Date
Curtis Dunham
e553ca67d4 tests: automatically kill regressions that take too long
When GNU coreutils 'timeout' is available, limit each regression
simulation to 4 hours.
2014-08-25 14:32:00 -05:00
Andreas Hansson
8d18713d28 stats: Minor update of Minor stats after uncacheable fix 2014-09-12 10:22:50 -04:00
Andreas Hansson
a217eba078 stats: Update stats for CPU and cache changes
This patch updates the stats to reflect the fixes and changes to the
CPU (mainly the o3), and the caches.
2014-09-03 07:42:59 -04:00
Andreas Hansson
db430698bf tests: Use medium dataset for perlbmk regressions
This patch changes the perlbmk regression script from the large to the
medium dataset to reduce the regression run time. For all ISAs and CPU
models, the total perlbmk host CPU time with the large dataset is
roughly 12 hours (constituting >30% of the total regression host
time). There is, most likely, almost no added value in terms of code
coverage for this rather excessive run time.
2014-09-03 07:42:57 -04:00
Andreas Hansson
351e146b37 alpha: Stop using 'inorder' and rely entirely on 'minor'
This patch avoids building the 'inorder' CPU model for any permutation
of ALPHA, and also removes the ALPHA regressions using the 'inorder'
CPU. The 'minor' CPU is already providing a broader test coverage.
2014-09-03 07:42:56 -04:00
Andreas Hansson
ee68c2b302 tests: Use O3_ARM_v7a config for full-system ARM regressions
This patch changes the CPU configuration used for the full-system ARM
regressions to increase the test coverage. Note that it is only the
core configuration, and not the caches etc.
2014-09-03 07:42:41 -04:00
Nilay Vaish
fa1fbcf020 stats: updates due to recent ruby and x86 changes
Also updates many out of date config files.
2014-09-01 16:55:52 -05:00
Emilio Castillo ext:(%2C%20Nilay%20Vaish%20%3Cnilay%40cs.wisc.edu%3E)
01f792a367 ruby: Fixes clock domains in configuration files
This patch fixes scripts related to ruby by adding the ruby clock domain.
Now the L1 controllers and  the Sequencer shares the cpu clock domain,
while the rest of the components use the ruby clock domain.

Before this patch, running simulations with the cpu clock set at 2GHz or
1GHz will output the same time results and could distort power measurements.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-09-01 16:55:30 -05:00
Andreas Hansson
cbf417c713 stats: Bump stats for the regressions using the minor CPU
Updating the stats to match the current behaviour.
2014-07-28 01:48:21 -04:00
Andrew Bardsley
5d0b25ba3f cpu: Minor CPU add regression tests for ARM and ALPHA
This patch adds regression tests results and test harnesses
for the Minor CPU on ARM and ALPHA.
2014-07-23 16:09:05 -05:00
Steve Reinhardt
040fa23d01 stats: update for syscall DPRINTF change
Only printing one rather than two args for the ignored syscall
warning means the count of register accesses has changed on
a few runs.  Oddly only Alpha Tru64 seems to have any ignored
syscalls in the regression tests.
2014-07-19 19:04:58 -07:00
Steve Reinhardt
5b08e211ab stats: update for O3 changes
Mostly small differences in total ticks, but O3 stall causes
shifted significantly.

30.eon does speed up by ~6% on Alpha and ARM, and 50.vortex
by 4.5% on ARM.  At the other extreme, X86 70.twolf is 0.8%
slower.
2014-06-22 14:33:09 -07:00
Nilay Vaish
2a8088f5ae stats: changes due to recent o3 patch. 2014-05-24 21:30:46 -05:00
Nilay Vaish
0aaa7d10d8 stats: changes due to o3 cpu and ruby message buffer patches 2014-05-23 06:07:02 -05:00
Steve Reinhardt
72403cb595 tests: update t1000 & pc-switcheroo-full stats
committed reference config.json files too
2014-05-12 17:22:17 -04:00
Steve Reinhardt
2136feaa55 tests: update eio ref outputs for new stats
Also committed reference config.json files for
the eio tests.
2014-05-10 22:13:51 -04:00
Andreas Hansson
57e5401d95 stats: Bump stats for the fixes, and mostly DRAM controller changes 2014-05-09 18:58:50 -04:00
Andreas Hansson
64806c4c13 tests: Reflect name change in DRAM tests
This patch reflects the recent name change in the DRAM TrafficGen
tests and also tidies up the test directory.

--HG--
rename : tests/configs/tgen-simple-dram.py => tests/configs/tgen-dram-ctrl.py
rename : tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/config.ini => tests/quick/se/70.tgen/ref/null/none/tgen-dram-ctrl/config.ini
rename : tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/simerr => tests/quick/se/70.tgen/ref/null/none/tgen-dram-ctrl/simerr
rename : tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/simout => tests/quick/se/70.tgen/ref/null/none/tgen-dram-ctrl/simout
rename : tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/stats.txt => tests/quick/se/70.tgen/ref/null/none/tgen-dram-ctrl/stats.txt
rename : tests/quick/se/70.tgen/tgen-simple-dram.cfg => tests/quick/se/70.tgen/tgen-dram-ctrl.cfg
2014-05-09 18:58:49 -04:00
Curtis Dunham
fe27f937aa arch: teach ISA parser how to split code across files
This patch encompasses several interrelated and interdependent changes
to the ISA generation step.  The end goal is to reduce the size of the
generated compilation units for instruction execution and decoding so
that batch compilation can proceed with all CPUs active without
exhausting physical memory.

The ISA parser (src/arch/isa_parser.py) has been improved so that it can
accept 'split [output_type];' directives at the top level of the grammar
and 'split(output_type)' python calls within 'exec {{ ... }}' blocks.
This has the effect of "splitting" the files into smaller compilation
units.  I use air-quotes around "splitting" because the files themselves
are not split, but preprocessing directives are inserted to have the same
effect.

Architecturally, the ISA parser has had some changes in how it works.
In general, it emits code sooner.  It doesn't generate per-CPU files,
and instead defers to the C preprocessor to create the duplicate copies
for each CPU type.  Likewise there are more files emitted and the C
preprocessor does more substitution that used to be done by the ISA parser.

Finally, the build system (SCons) needs to be able to cope with a
dynamic list of source files coming out of the ISA parser. The changes
to the SCons{cript,truct} files support this. In broad strokes, the
targets requested on the command line are hidden from SCons until all
the build dependencies are determined, otherwise it would try, realize
it can't reach the goal, and terminate in failure. Since build steps
(i.e. running the ISA parser) must be taken to determine the file list,
several new build stages have been inserted at the very start of the
build. First, the build dependencies from the ISA parser will be emitted
to arch/$ISA/generated/inc.d, which is then read by a new SCons builder
to finalize the dependencies. (Once inc.d exists, the ISA parser will not
need to be run to complete this step.) Once the dependencies are known,
the 'Environments' are made by the makeEnv() function. This function used
to be called before the build began but now happens during the build.
It is easy to see that this step is quite slow; this is a known issue
and it's important to realize that it was already slow, but there was
no obvious cause to attribute it to since nothing was displayed to the
terminal. Since new steps that used to be performed serially are now in a
potentially-parallel build phase, the pathname handling in the SCons scripts
has been tightened up to deal with chdir() race conditions. In general,
pathnames are computed earlier and more likely to be stored, passed around,
and processed as absolute paths rather than relative paths.  In the end,
some of these issues had to be fixed by inserting serializing dependencies
in the build.

Minor note:
For the null ISA, we just provide a dummy inc.d so SCons is never
compelled to try to generate it. While it seems slightly wrong to have
anything in src/arch/*/generated (i.e. a non-generated 'generated' file),
it's by far the simplest solution.
2014-05-09 18:58:47 -04:00
Sascha Bischoff
e940bac278 mem: Auto-generate CommMonitor trace file names
Splits the CommMonitor trace_file parameter into three parameters. Previously,
the trace was only enabled if the trace_file parameter was set, and would be
written to this file. This patch adds in a trace_enable and trace_compress
parameter to the CommMonitor.

No trace is generated if trace_enable is set to False. If it is set to True, the
trace is written to a file based on the name of the SimObject in the simulation
hierarchy. For example, system.cluster.il1_commmonitor.trc. This filename can be
overridden by additionally specifying a file name to the trace_file parameter
(more on this later).

The trace_compress parameter will append .gz to any filename if set to True.
This enables compression of the generated traces. If the file name already ends
in .gz, then no changes are made.

The trace_file parameter will override the name set by the trace_enable
parameter. In the case that the specified name does not end in .gz but
trace_compress is set to true, .gz is appended to the supplied file name.
2014-05-09 18:58:46 -04:00
Andreas Hansson
0c75581d03 stats: updates for pc-switcheroo-full due to o3 smt fix 2014-04-22 03:12:15 -04:00
Nilay Vaish
3bc5cfcc03 stats: updates due to o3 smt fix
+ changes to one ruby regression config.ini file.
2014-04-19 09:16:14 -05:00
Andreas Hansson
8b4b1dcb86 stats: Update stats for DRAM changes
This patch updates the stats to reflect the changes to the DRAM
controller.
2014-03-23 11:12:19 -04:00
Nilay Vaish
83d09ee215 stats: updates due to changes to ruby config scripts
These updates to ruby regression stats are due to renaming piobus to iobus
and dropping piobus in the se mode.
2014-03-20 09:16:35 -05:00
Nilay Vaish
b5cc4c7604 config: ruby: rename _cpu_ruby_ports to _cpu_ports 2014-03-20 09:14:14 -05:00
Nilay Vaish
d5b5d89b34 config: remove ruby_fs.py
The patch removes the ruby_fs.py file.  The functionality is being moved to
fs.py.  This would being ruby fs simulations in line with how ruby se
simulations are started (using --ruby option).  The alpha fs config functions
are being combined for classing and ruby memory systems.  This required
renaming the piobus in ruby to iobus.  So, we will have stats being renamed
in the stats file for ruby fs regression.
2014-03-20 08:03:09 -05:00
Nilay Vaish
9b3418d163 ruby: no piobus in se mode
Piobus was recently added to se scripts for ruby so that the interrupt
controller can be connected to something (required since the interrupt
controller sends address range messages).  This patch removes the piobus
and instead, the pio port of ruby port will now ignore the range change
messages in se mode.
2014-03-20 08:03:09 -05:00
Nilay Vaish
53f697a616 stats: updates due to c0db268f811b 2014-02-24 20:50:06 -06:00
Nilay Vaish
8504b079b8 ruby: correct errors in changeset 4eec7bdde5b0
Couple of errors were discovered in 4eec7bdde5b0 which necessitated this patch.
Firstly, we create interrupt controllers in the se mode, but no piobus was
being created.  RubyPort, which earlier used to ignore range changes now
forwards those to the piobus.  The lack of piobus resulted in segmentation
fault.  This patch creates a piobus even in se mode.  It is not created only
when some tester is running.  Secondly,  I had missed out on modifying port
connections for other coherence protocols.
2014-02-24 20:50:05 -06:00
Nilay Vaish
3b404fb1a0 stats: updates due to changes to ruby pio access handling 2014-02-23 19:16:16 -06:00
Nilay Vaish
7e27860ef4 ruby: route all packets through ruby port
Currently, the interrupt controller in x86 is connected to the io bus
directly.  Therefore the packets between the io devices and the interrupt
controller do not go through ruby.  This patch changes ruby port so that
these packets arrive at the ruby port first, which then routes them to their
destination.  Note that the patch does not make these packets go through the
ruby network.  That would happen in a subsequent patch.
2014-02-23 19:16:16 -06:00
Andreas Hansson
fd9343eb85 arm: Bump stats after FS config script update
This patch updates the stats to reflect the change in kernel options
needed for armv8 (but used for all FS regressions).
2014-02-19 07:59:46 -05:00
Nilay Vaish
5abbb84f02 stats: updates due to branch predictor warming 2014-02-16 11:40:34 -06:00
Nilay Vaish
fa0ff1c902 stats: update sparc fs stats 2014-01-27 13:30:37 -06:00
Steve Reinhardt
85016c2d45 stats: update eio stats for recent changes 2014-01-27 00:38:58 -05:00
Ali Saidi
cfb805cc71 stats: update stats for ARMv8 changes 2014-01-24 15:29:34 -06:00
Ali Saidi
f3585c841e stats: update stats for cache occupancy and clock domain changes 2014-01-24 15:29:33 -06:00
Nilay Vaish
fc6d1f3399 stats: updates due to changes to ruby 2014-01-10 16:19:58 -06:00
Nilay Vaish
bb6d7d402b ruby: rename MESI_CMP_directory to MESI_Two_Level
This is because the next patch introduces a three level hierarchy.

--HG--
rename : build_opts/ALPHA_MESI_CMP_directory => build_opts/ALPHA_MESI_Two_Level
rename : build_opts/X86_MESI_CMP_directory => build_opts/X86_MESI_Two_Level
rename : configs/ruby/MESI_CMP_directory.py => configs/ruby/MESI_Two_Level.py
rename : src/mem/protocol/MESI_CMP_directory-L1cache.sm => src/mem/protocol/MESI_Two_Level-L1cache.sm
rename : src/mem/protocol/MESI_CMP_directory-L2cache.sm => src/mem/protocol/MESI_Two_Level-L2cache.sm
rename : src/mem/protocol/MESI_CMP_directory-dir.sm => src/mem/protocol/MESI_Two_Level-dir.sm
rename : src/mem/protocol/MESI_CMP_directory-dma.sm => src/mem/protocol/MESI_Two_Level-dma.sm
rename : src/mem/protocol/MESI_CMP_directory-msg.sm => src/mem/protocol/MESI_Two_Level-msg.sm
rename : src/mem/protocol/MESI_CMP_directory.slicc => src/mem/protocol/MESI_Two_Level.slicc
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/config.ini => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/config.ini
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/ruby.stats
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/simerr => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/simerr
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/simout => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/simout
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/stats.txt
rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/system.pc.com_1.terminal => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/system.pc.com_1.terminal
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/config.ini => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/config.ini
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/ruby.stats
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/simerr => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/simerr
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/simout => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/simout
rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/stats.txt
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/config.ini => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/config.ini
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/ruby.stats
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/simerr => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/simerr
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/simout => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/simout
rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/stats.txt
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/config.ini => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/config.ini
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/ruby.stats
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/simerr => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/simerr
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/simout => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/simout
rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/stats.txt
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/config.ini => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/config.ini
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/ruby.stats
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/simerr => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/simerr
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/simout => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/simout
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/stats.txt
2014-01-04 00:03:33 -06:00
Steve Reinhardt
a212844f67 config, x86: move kernel specification from tests to FSConfig.py
For some reason, the default x86 kernel is specified in
tests/configs/x86_generic.py and not in configs/common/FSConfig.py,
where the kernels for all the other ISAs are.  This means that
running configs/example/fs.py for x86 fails because no kernel
is specified.  Moving the specification over fixes this problem.

There is another problem that this uncovers, which is that going
past the init stage (i.e., past where the regression test stops)
fails because the fsck test on the disk device fails, but that's
a separate issue.
2014-01-03 17:08:44 -08:00
Nilay Vaish
e6008b6bc1 stats: updates due to bug fixed in mesi coherence protocol 2013-12-26 15:18:58 -06:00
Nilay Vaish
2823982a3c stats: updates due to changes to ticksToCycles() 2013-11-26 17:05:25 -06:00
Steve Reinhardt
a2c21d47a8 tests: suppress output on switcheroo tests
The output from the switcheroo tests is voluminous and
(because it includes timestamps) highly sensitive to
minor changes, leading to extremely large updates to the
reference outputs.  This patch addresses this problem
by suppressing output from the tests.  An internal
parameter can be set to enable the output.  Wiring that
up to a command-line flag (perhaps even the rudimantary
-v/-q options in m5/main.py) is left for future work.
2013-11-14 15:03:42 -08:00
Andreas Hansson
ccfdc533b9 stats: Bump stats to match DRAM controller changes
This patch encompasses all the stats updates needed to reflect the
changes to the DRAM controller.
2013-11-01 11:56:34 -04:00
Andreas Hansson
0e6ced5c4f stats: Bump stats after shifting to SimpleMemory
Match stats with new regression configs.
2013-11-01 11:56:15 -04:00
Andreas Hansson
9145e2cfd4 test: Use SimpleMemory for atomic full-system tests
Keep it simple and use the SimpleMemory rather than the DRAM
controller model for atomic full-system tests.
2013-11-01 11:56:14 -04:00
Steve Reinhardt
10e6450120 test: update stats
Update stats for recent changes.  Mostly minor changes
in register access stats due to addition of new cc
register type and slightly different (and more accurate)
classification of int vs. fp register accesses.
2013-10-16 10:44:12 -04:00
Steve Reinhardt
fe61a074a2 scons: fix minor update-ref bug in regressions
In the unusual case that regressions are run with --update-ref
when there is no existing regression output, scons gets
confused because it depends on stats.txt to trigger the
update, but it has no indication that running the test will
generate the stats.txt file.  (In the typical case where
stats.txt already exists, scons doesn't care about where
it came from.)

It's easy to fix this just by adding the stats.txt file
to the target list for the test action.
2013-10-15 18:22:41 -04:00
Andreas Hansson
a44bb59192 stats: Bump pc-simple-timing-ruby stats
This patch simply brings the stats for the pc-simple-timing-ruby
regression up to date. The particular regression seems to give
different results on different systems unfortunately, and this update
reflects the current behaviour on zizzer.
2013-10-09 04:41:19 -04:00
Andreas Sandberg
0438bf9389 stats: Update x86 stats after x87 fixes
The updates to the x87 caused the stats for several regressions to
change. This was mainly caused by the addition of a working 32-bit and
80-bit FP load instruction and xsave support.
2013-10-02 11:03:38 +02:00