configs/common/FSConfig.py:
seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
Use instruction count from cpu rather than cycles because that is what legion does
we can change it back after were done with legion
src/base/bitfield.hh:
add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
change asserts of packet success to if panics wrapped with NDEBUG defines
so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
convert some tabs to spaces
src/python/m5/objects/T1000.py:
add more fake devices for each l1 bank and each memory controller
--HG--
extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
Add the ability to use an address mask for symbol loading
Rather then silently failing on platform accesses panic
Move BadAddr/IsaFake no Device from Tsunami
Let the system kernel be none, but warn about it
configs/common/FSConfig.py:
We don't have a kernel for sparc yet
src/arch/sparc/system.cc:
Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
src/base/loader/aout_object.cc:
src/base/loader/aout_object.hh:
src/base/loader/ecoff_object.cc:
src/base/loader/ecoff_object.hh:
src/base/loader/elf_object.cc:
src/base/loader/elf_object.hh:
src/base/loader/object_file.hh:
src/base/loader/raw_object.cc:
src/base/loader/raw_object.hh:
Add the ability to use an address mask for symbol loading
src/dev/sparc/t1000.cc:
Rather then silently failing on platform accesses panic
src/dev/sparc/t1000.hh:
fix up a couple of platform comments
src/python/m5/objects/Bus.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/T1000.py:
src/python/m5/objects/Tsunami.py:
Move BadAddr/IsaFake no Device from Tsunami
src/python/m5/objects/System.py:
Let kernel be none
src/sim/system.cc:
Let the system kernel be none, but warn about it
--HG--
extra : convert_revision : 92f6afef599a3d3c7c5026d03434102c41c7b5f4
change /netperf/netperf to /netperf-bin/netperf
nat-netperf-maerts-client.rcS:
bad comment that went with the file - accidentally committed but probably doesn't matter, i ust eliminated an ivlb in the script.
configs/boot/nat-netperf-maerts-client.rcS:
replace netperf/netperf with netperf-bin/netperf
configs/boot/netperf-maerts-client.rcS:
change /netperf/netperf to /netperf-bin/netperf
--HG--
extra : convert_revision : 32fed0042e267f315d3e688ebc4b66d7002b85f0
into zower.eecs.umich.edu:/eecshome/m5/newmemmid
src/arch/sparc/isa_traits.hh:
src/arch/sparc/miscregfile.hh:
hand merge
--HG--
extra : convert_revision : 34f50dc5e6e22096cb2c08b5888f2b0fcd418f3e
configs/common/FSConfig.py:
Make a SPARC system create an IO bus.
src/python/m5/objects/T1000.py:
Create a T1000 platform
src/arch/sparc/miscregfile.cc:
Initialize the strand status register to the value legion provides.
src/cpu/exetrace.cc:
Truncate an ExtMachInst to a MachInst before comparing with Legion.
--HG--
extra : convert_revision : e4189b572a5297e8362f5bd26d87b74736c8e5f1
configs/splash2/run.py:
Fix MaxTick for splash configs
configs/splash2/cluster.py:
Add a config that allows clusters of CPU's to be attached to a single L1
--HG--
extra : convert_revision : 1bb0a0c5f4889316940a9858be90ae2eaa849f1a
Since we don't have a platform yet, you need to comment out the default responder stuff in Bus.py to make it work.
SConstruct:
Add TARGET_ISA to the list of environment variables that end up in the build_env for python
configs/common/FSConfig.py:
add a simple SPARC system to being testing with, you'll need to change makeLinuxAlphaSystem to makeSparcSystem in fs.py for now
src/SConscript:
add a raw file object, at least until we get more info about how to compile openboot properly
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
add parameters for ROM files (OBP/Reset/Hypervisor), a ROM, load files into ROM
src/base/loader/object_file.cc:
src/base/loader/object_file.hh:
add option to try raw when nothing works
src/cpu/exetrace.cc:
cleanup lockstep printing a little bit
src/cpu/m5legion_interface.h:
change the instruction to be 32 bits because it is
src/mem/physical.cc:
fix assert that doesn't work if memory starts somewhere above 0
src/python/m5/objects/BaseCPU.py:
Add if statement to choose between sparc tlbs and alpha tlbs
src/python/m5/objects/System.py:
Add a sparc system that sets the rom addresses correctly
src/python/m5/params.py:
add the ability to add Addr() together
--HG--
extra : convert_revision : bbbd8a56134f2dda2728091f740e2f7119b0c4af
configs/common/Simulation.py:
Atomic CPU now works properly with caches, so we don't have to do extra parsing to hook up caches only to the timing CPU.
However the O3CPU must always use caches, so a check for that must still exist.
Also change the switch_cpus to be placed at the system level, now that Steve changed how the IntrController gets its CPU.
configs/example/fs.py:
configs/example/se.py:
Atomic CPU now handles caches.
--HG--
extra : convert_revision : 534ded558ef96cafd76b4b5c5317bd8f4d05076e
configs/common/Simulation.py:
simplify maxtick code a little bit - instead of checking for -1, just set it at MaxTick.
src/python/m5/__init__.py:
make a new m5 param called MaxTick.
src/sim/host.hh:
fix the M5 def. of MaxTick
src/sim/main.cc:
Simplify the MaxTick/num_cycles parsing within main.cc
--HG--
extra : convert_revision : f800addfbc1323591c2e05b892276b439b671668
configs/common/Simulation.py:
enable going from checkpoint into arbitrary CPU with or without caches.
--HG--
extra : convert_revision : 02e7ff8982fdb3a08bc609f89bd58df5b3a581b2
configs/common/Simulation.py:
Remove mem parameter.
configs/example/se.py:
Remove debug output that got included in my other push.
--HG--
extra : convert_revision : 643c34147f6c6cbb98b8e6d6e8206b9859593ab0
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix
configs/example/fs.py:
configs/example/se.py:
src/mem/tport.hh:
Hand merge.
--HG--
extra : convert_revision : b9df95534d43b3b311f24ae24717371d03d615bf
configs/example/fs.py:
configs/example/se.py:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.cc:
src/cpu/thread_state.hh:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
No need for mem parameter any more.
src/cpu/checker/cpu.cc:
Use new constructor for simple thread (no more MemObject parameter).
src/cpu/checker/cpu.hh:
Remove MemObject parameter.
src/cpu/memtest/memtest.hh:
Ports now take in their MemObject owner.
src/cpu/o3/alpha/cpu_builder.cc:
Remove mem parameter.
src/cpu/o3/alpha/cpu_impl.hh:
Remove memory parameter and clean up handling of TranslatingPort.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/params.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/atomic.cc:
Remove memory parameter.
--HG--
extra : convert_revision : 43cb44a33b31320d44b69679dcf646c0380d07d3
Accidentally committed this last time
configs/common/FSConfig.py:
Accidentally committed this last time
--HG--
extra : convert_revision : 32d49c17c661b57a9aa9c3b057258f6e037ba745
configs/common/Options.py:
make the warmup period in a standard switch part of the option.
configs/common/Simulation.py:
add some comments and also make the warmup period an option.
--HG--
extra : convert_revision : 0fa587291b97ff87c3b3a617e7359ac6d9bed7a5
configs/example/fs.py:
factor out common code.
configs/example/se.py:
factor out common code
--HG--
extra : convert_revision : 72a1f653c84eae1b7d281e0a5e60ee116ad6b27d
1) rearrange the options to be in a nice logical order
2) add an option for what i call "standard switch", which is from simple->timing->detailed
3) make checkpointing code such that checkpoints taken from the command line override checkpoint instructions compiled into binaries.
4) add an option for maximum number of checkpoints - simulation will stop at max or maxtick, whichever is first
--HG--
extra : convert_revision : 8d905e1b297ae664d60f8c8ba48b2aac25437fc6
1) rearrange the options to be in a nice logical order
2) add an option for what i call "standard switch", which is from simple->timing->detailed
3) change the client/server naming system to testsys/drivesys
4) make checkpointing code such that checkpoints taken from the command line override checkpoint instructions compiled into binaries.
5) add an option for maximum number of checkpoints - simulation will stop at max or maxtick, whichever is first
doesn't fully work because of a caching issue, but the python side of things i think should work - the counterpart of se.py does work.
i think i should factor out a lot of the common code in both, but i'll do that after this checkin, just to get this in the tree.
configs/example/fs.py:
1) rearrange the options to be in a nice logical order
2) add an option for what i call "standard switch", which is from simple->timing->detailed
3) change the client/server naming system to testsys/drivesys
4) make checkpointing code such that checkpoints taken from the command line override checkpoint instructions compiled into binaries.
5) add an option for maximum number of checkpoints - simulation will stop at max or maxtick, whichever is first
--HG--
extra : convert_revision : 078e22800ff83f6e950bf5cc6fb16a98320e7c51
configs/example/fs.py:
Add MOESI protocol to caches (uni coherence not quite working w/FS yet).
--HG--
extra : convert_revision : 7bef7d9c5b24bf7241cc810df692408837b06b86
configs/example/fs.py:
Add flag for MP server systems.
src/python/m5/objects/AlphaConsole.py:
src/python/m5/objects/IntrControl.py:
Change CPU from 'any' to 'cpu[0]' to work better with MP sytems.
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-timing-dual.py:
Don't need to set console & intrcontrol cpu
params anymore (default is fixed now).
--HG--
extra : convert_revision : 9417b12b1b395ff7d6a9f2894e4123923c754daf
into zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/cpu/simple/timing.hh:
tests/configs/o3-timing-mp.py:
Hand merge.
--HG--
extra : convert_revision : a58cc439eb5e8f900d175ed8b5a85b6c8723e558
so you can restore by a command line like this:
m5.opt fs.py --checkpoint_dir="/my/ckpt/dir" -c 3
configs/example/fs.py:
add in checkpoint restoration option, you can restore a checkpoint by giving a directory, and then giving a checkpoint number, the earliest checkpoint is 1, the latest is N.
--HG--
extra : convert_revision : bf9c8d3265a3875cdfb6a878005baa7ae29af90d
configs/common/FSConfig.py:
configs/common/SysPaths.py:
configs/example/fs.py:
configs/example/se.py:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
Clean up configs by removing FullO3Config and instead using default values.
src/python/m5/objects/FUPool.py:
Add in default FUPool.
src/python/m5/objects/O3CPU.py:
Use defaults better. Also set checker parameters, and fix up a config bug.
--HG--
extra : convert_revision : 5fd0c000143f4881f10a9a575c3810dc97cb290b
Significant revamp of Port code.
Some cleanup of SimObject code too, particularly to
make the SimObject and MetaSimObject implementations of
__setattr__ more consistent.
Unproxy code split out of print_ini().
src/python/m5/multidict.py:
Make get() return None by default, to match semantics
of built-in dictionary objects.
--HG--
extra : convert_revision : db73b6cdd004a82a08b2402afd1e16544cb902a4
Arg to m5.simulate() is a delta, not an absolute curTick value.
I didn't test this change, but I'm not convinced the previous
example was tested either, so I don't feel too badly about it.
configs/example/fs.py:
Arg to m5.simulate() is a delta, not an absolute curTick value.
I didn't test this change, but I'm not convinced the previous
example was tested either, so I don't feel too badly about it.
--HG--
extra : convert_revision : ef7df7b83b3e2b5da02408c674169ccbed75a441
also, update all the rcS files so that they are in sync with the new linux-dist build system.
configs/boot/devtime.rcS:
configs/boot/iscsi-client.rcS:
configs/boot/iscsi-server.rcS:
configs/boot/micro_memlat.rcS:
configs/boot/micro_stream.rcS:
configs/boot/micro_tlblat.rcS:
configs/boot/nat-netperf-maerts-client.rcS:
configs/boot/nat-netperf-server.rcS:
configs/boot/nat-netperf-stream-client.rcS:
configs/boot/nat-spec-surge-client.rcS:
configs/boot/nat-spec-surge-server.rcS:
configs/boot/natbox-netperf.rcS:
configs/boot/natbox-spec-surge.rcS:
configs/boot/netperf-rr.rcS:
configs/boot/netperf-server.rcS:
configs/boot/netperf-stream-client.rcS:
configs/boot/netperf-stream-nt-client.rcS:
configs/boot/nfs-client-nhfsstone.rcS:
configs/boot/nfs-client-tcp-smallb.rcS:
configs/boot/nfs-client-tcp.rcS:
configs/boot/nfs-client.rcS:
configs/boot/nfs-server-nhfsstone.rcS:
configs/boot/nfs-server.rcS:
configs/boot/ping-client.rcS:
configs/boot/ping-server.rcS:
configs/boot/spec-surge-client.rcS:
configs/boot/spec-surge-server.rcS:
configs/boot/surge-client.rcS:
configs/boot/surge-server.rcS:
make tree rcS files reflect what we've been actually using in /dist.
--HG--
extra : convert_revision : 48fe4fe71938ef9d029e428028a271242c8d2faa
configs/boot/micro_memlat.rcS:
Update these scripts so they work (not sure why they broke)
configs/boot/micro_tlblat.rcS:
Update this script to use a different test.
--HG--
extra : convert_revision : 6e8692540a9fac6ae8f2d9975c70d4135354b849
configs/common/FSConfig.py:
Clean up some code to make functions look less like classes. Also put makeList function (formerly listWrapper) into m5 itself.
configs/test/fs.py:
Update for changed code.
src/python/m5/__init__.py:
Put makeList into m5.
--HG--
extra : convert_revision : 731806a7486f9abf986f52926126df666b024b1d
SConstruct:
Make test CPUs option non-sticky.
configs/common/FSConfig.py:
Be sure to set the memory mode.
configs/test/fs.py:
Wrong string.
tests/SConscript:
Only test valid CPUs that have been compiled in.
tests/test1/ref/alpha/atomic/config.ini:
tests/test1/ref/alpha/atomic/config.out:
tests/test1/ref/alpha/atomic/m5stats.txt:
tests/test1/ref/alpha/atomic/stdout:
tests/test1/ref/alpha/detailed/config.ini:
tests/test1/ref/alpha/detailed/config.out:
tests/test1/ref/alpha/detailed/m5stats.txt:
tests/test1/ref/alpha/detailed/stdout:
tests/test1/ref/alpha/timing/config.ini:
tests/test1/ref/alpha/timing/config.out:
tests/test1/ref/alpha/timing/m5stats.txt:
tests/test1/ref/alpha/timing/stdout:
Update output.
--HG--
extra : convert_revision : 6eee2a5eae0291b5121b41bcd7021179cdd520a3
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge
configs/test/fs.py:
Hand merge.
--HG--
extra : convert_revision : 78f7c46084f66d52ddfe0386fd7c08de8017331e
configs/test/fs.py:
Pull out a lot of common code and put it into configs/common/FSConfig.py.
--HG--
extra : convert_revision : 175b18d75f82ddecbcc9a6418fe40df314db55d5
Add a max time option in seconds and a single system root clock be 1THz
configs/test/fs.py:
Add a max time option in seconds and a single system root clock be 1THz
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Enforce the timing cpu ticking at it's clock rate
--HG--
extra : convert_revision : a1b0de27abde867f9c3da5bec11639e3d82a95f5
update scripts acordingly
configs/test/SysPaths.py:
new syspaths from nate, this one allows you to set script, binary, and disk paths like
system.dir = 'aouaou' in your script
configs/test/fs.py:
update for system mem_mode
Put small checkpoint example
Make clock 1THz
configs/test/test.py:
src/arch/alpha/freebsd/system.cc:
src/arch/alpha/linux/system.cc:
src/arch/alpha/system.cc:
src/arch/alpha/tru64/system.cc:
src/arch/sparc/system.cc:
src/python/m5/objects/System.py:
src/sim/system.cc:
src/sim/system.hh:
update for system mem_mode
src/dev/io_device.cc:
Use time returned from sendAtomic to delay
--HG--
extra : convert_revision : 67eedb3c84ab2584613faf88a534e793926fc92f
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge
configs/test/test.py:
Hand merge.
--HG--
extra : convert_revision : e3fce9cf50a65a9400cd3ec887b13e4765274ec2
configs/test/fs.py:
Pull a lot of the default options out of the config file now that they are in the Python objects themselves. Also merge this file with the single_fs.py, allowing one file to be used for both. Previously they differed only by the system they instantiated.
configs/test/test.py:
Initial stab at consolidating configuration files so they aren't redundant between the regression tests and the simple examples.
--HG--
extra : convert_revision : e8ae3de5a6d8864831f21089d4fdb8ec690e4731
configs/test/fs.py:
configs/test/test.py:
update for the new way that m5 deals with options
src/python/SConscript:
Compile AUTHORS, LICENSE, README, and RELEASE_NOTES into the
python stuff.
src/python/m5/__init__.py:
redo the way options work.
Move them all to main.py
src/sim/main.cc:
Migrate more functionality for main() into python.
Namely option parsing
src/python/m5/attrdict.py:
A dictionary object that overrides attribute access to
do item access.
src/python/m5/main.py:
The new location for M5's option parsing, and the main()
routine to set up the simulation.
--HG--
extra : convert_revision : c86b87a9f508bde1994088e23fd470c7753ee4c1
configs/test/test.py:
Update to use new cpu getPort functionality
src/cpu/base.cc:
Make cpu's a memObject to expose getPort interface
src/cpu/base.hh:
Make cpu's a memObject to export getPort interface
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Now use the connector via getPort interface
src/mem/cache/base_cache.cc:
Make sure the cache recognizes all port names
--HG--
extra : convert_revision : dbfefa978ec755bc8aa6f962ae158acf32dafe61
Update configuration for new default responder on bus
Update to devices to handle their own pci config space without pciconfigall
Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for
Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same
bus:dev:func and interrupt
Remove pciconfigspace from pci devices, and py files
Add calcConfigAddr that returns address for config space based on bus/dev/function + offset
configs/test/fs.py:
Update configuration for new default responder on bus
src/dev/ide_ctrl.cc:
src/dev/ide_ctrl.hh:
src/dev/ns_gige.cc:
src/dev/ns_gige.hh:
src/dev/pcidev.cc:
src/dev/pcidev.hh:
Update to handle it's own pci config space without pciconfigall
src/dev/io_device.cc:
src/dev/io_device.hh:
change naming for pio port
break out recvTiming into two functions to reuse code
src/dev/pciconfigall.cc:
src/dev/pciconfigall.hh:
removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for
src/dev/pcireg.h:
add a max size for PCI config space (per PCI spec)
src/dev/platform.cc:
src/dev/platform.hh:
remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same
bus:dev:func and interrupt
src/dev/sinic.cc:
remove pciconfigspace as it's no longer a needed parameter
src/dev/tsunami.cc:
src/dev/tsunami.hh:
src/dev/tsunami_pchip.cc:
src/dev/tsunami_pchip.hh:
add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec)
src/mem/bus.cc:
src/mem/bus.hh:
src/python/m5/objects/Bus.py:
add idea of default responder to bus
src/python/m5/objects/Pci.py:
add config port for pci devices
add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec)
--HG--
extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
the workloads.
Now SMT on the O3CPU can be invoked by "/ALPHA_SE/m5.debug ../configs/test/test.py -d --cmd="hello;hello" -i="file1;file2"
I think I am a novice python magician now!!!!....
configs/test/test.py:
Added hook to check for SMT workloads. SMT is identified by adding a semicolon between
the workloads.
Now SMT on the O3CPU can be invoked by "/ALPHA_SE/m5.debug ../configs/test/test.py -d --cmd="hello;hello" --input="file1;file2"
(btw, We are back to working for this double hello world case)
I am a novice python magician now!!!!....
--HG--
extra : convert_revision : b55e10dce33f5a9dc4c78f90409ec0912bad4292
configs/test/SysPaths.py:
remove some tabs and add /n/poolfs/z/dist/m5/system
src/dev/io_device.cc:
fix since pio timing dma packts colud be nacked too
src/dev/io_device.hh:
move DmaReqState into DmaDevie
--HG--
extra : convert_revision : 2b5300d85ab33b3753afc54bc6a04a47b6e00d20
