Commit graph

267 commits

Author SHA1 Message Date
Ali Saidi
e1b9c8c169 ARM: Fix configuration files for bare-metal binaries. 2013-08-26 10:58:06 -05:00
Andreas Hansson
c26911013c config: Command line support for multi-channel memory
This patch adds support for specifying multi-channel memory
configurations on the command line, e.g. 'se/fs.py
--mem-type=ddr3_1600_x64 --mem-channels=4'. To enable this, it
enhances the functionality of MemConfig and moves the existing
makeMultiChannel class method from SimpleDRAM to the support scripts.

The se/fs.py example scripts are updated to make use of the new
feature.
2013-08-19 03:52:34 -04:00
Akash Bagdia
e7e17f92db power: Add voltage domains to the clock domains
This patch adds the notion of voltage domains, and groups clock
domains that operate under the same voltage (i.e. power supply) into
domains. Each clock domain is required to be associated with a voltage
domain, and the latter requires the voltage to be explicitly set.

A voltage domain is an independently controllable voltage supply being
provided to section of the design. Thus, if you wish to perform
dynamic voltage scaling on a CPU, its clock domain should be
associated with a separate voltage domain.

The current implementation of the voltage domain does not take into
consideration cases where there are derived voltage domains running at
ratio of native voltage domains, as with the case where there can be
on-chip buck/boost (charge pumps) voltage regulation logic.

The regression and configuration scripts are updated with a generic
voltage domain for the system, and one for the CPUs.
2013-08-19 03:52:28 -04:00
Andreas Hansson
a8480fe1c3 config: Move the memory instantiation outside FSConfig
This patch moves the instantiation of the memory controller outside
FSConfig and instead relies on the mem_ranges to pass the information
to the caller (e.g. fs.py or one of the regression scripts). The main
motivation for this change is to expose the structural composition of
the memory system and allow more tuning and configuration without
adding a large number of options to the makeSystem functions.

The patch updates the relevant example scripts to maintain the current
functionality. As the order that ports are connected to the memory bus
changes (in certain regresisons), some bus stats are shuffled
around. For example, what used to be layer 0 is now layer 1.

Going forward, options will be added to support the addition of
multi-channel memory controllers.
2013-08-19 03:52:27 -04:00
Joel Hestness
7aa67f42cb Configs: Fix up maxtick and maxtime
This patch contains three fixes to max tick options handling in Options.py and
Simulation.py:

 1) Since the global simulator frequency isn't bound until m5.instantiate()
is called, the maxtick resolution needs to happen after this call, since
changes to the global frequency will cause m5.simulate() to misinterpret the
maxtick value. Shuffling this also requires tweaking the checkpoint directory
handling to signal the checkpoint restore tick back to run().  Fixing this
completely and correctly will require storing the simulation frequency into
checkpoints, which is beyond the scope of this patch.

 2) The maxtick option in Options.py was defaulted to MaxTicks, so the old code
would always skip over the maxtime part of the conditionals at the beginning
of run(). Change the maxtick default to None, and set the maxtick local
variable in run() appropriately.

 3) To clarify whether max ticks settings are relative or absolute, split the
maxtick option into separate options, for relative and absolute. Ensure that
these two options and the maxtime option are handled appropriately to set the
maxtick variable in Simulation.py.
2013-07-18 14:46:54 -05:00
Andreas Hansson
c20105c2ff config: Update script to set cache line size on system
This patch changes the config scripts such that they do not set the
cache line size per cache instance, but rather for the system as a
whole.
2013-07-18 08:31:19 -04:00
Nilay Vaish
516b7849e8 configs: rearrange the available options in Options.py
It also changes the instantiation of physmem in se.py so as to make
use of the memory size supplied by the mem_size option.
2013-06-28 21:42:26 -05:00
Akash Bagdia
7d7ab73862 sim: Add the notion of clock domains to all ClockedObjects
This patch adds the notion of source- and derived-clock domains to the
ClockedObjects. As such, all clock information is moved to the clock
domain, and the ClockedObjects are grouped into domains.

The clock domains are either source domains, with a specific clock
period, or derived domains that have a parent domain and a divider
(potentially chained). For piece of logic that runs at a derived clock
(a ratio of the clock its parent is running at) the necessary derived
clock domain is created from its corresponding parent clock
domain. For now, the derived clock domain only supports a divider,
thus ensuring a lower speed compared to its parent. Multiplier
functionality implies a PLL logic that has not been modelled yet
(create a separate clock instead).

The clock domains should be used as a mechanism to provide a
controllable clock source that affects clock for every clocked object
lying beneath it. The clock of the domain can (in a future patch) be
controlled by a handler responsible for dynamic frequency scaling of
the respective clock domains.

All the config scripts have been retro-fitted with clock domains. For
the System a default SrcClockDomain is created. For CPUs that run at a
different speed than the system, there is a seperate clock domain
created. This domain incorporates the CPU and the associated
caches. As before, Ruby runs under its own clock domain.

The clock period of all domains are pre-computed, such that no virtual
functions or multiplications are needed when calling
clockPeriod. Instead, the clock period is pre-computed when any
changes occur. For this to be possible, each clock domain tracks its
children.
2013-06-27 05:49:49 -04:00
Akash Bagdia
597d2aa3a6 config: Rename clock option to Ruby clock
This patch changes the 'clock' option to 'ruby-clock' as it is only
used by Ruby.
2013-06-27 05:49:49 -04:00
Akash Bagdia
076d04a653 config: Add a system clock command-line option
This patch adds a 'sys_clock' command-line option and use it to assign
clocks to the system during instantiation.

As part of this change, the default clock in the System class is
removed and whenever a system is instantiated a system clock value
must be set. A default value is provided for the command-line option.

The configs and tests are updated accordingly.
2013-06-27 05:49:49 -04:00
Akash Bagdia
4459b30525 config: Add a CPU clock command-line option
This patch adds a 'cpu_clock' command-line option and uses the value
to assign clocks to components running at the CPU speed (L1 and L2
including the L2-bus). The configuration scripts are updated
accordingly.

The 'clock' option is left unchanged in this patch as it is still used
by a number of components. In follow-on patches the latter will be
disambiguated further.
2013-06-27 05:49:49 -04:00
Andreas Sandberg
d989a3ad50 config: Add missing CPUs to --restore-with-cpu
The --restore-with-cpu option didn't use CpuConfig.cpu_names() to
determine which CPU names are valid, instead it used a static list of
known CPU names. This changeset makes the option parsing code use the
CPU list from the CpuConfig module instead.
2013-06-03 13:40:05 +02:00
Andreas Hansson
3bc4ecdcb4 mem: More descriptive DRAM config names
This patch changes the class names of the variuos DRAM configurations
to better reflect what memory they are based on. The speed and
interface width is now part of the name, and also the alias that is
used to select them on the command line.

Some minor changes are done to the actual parameters, to better
reflect the named configurations. As a result of these changes the
regressions change slightly and the stats will be bumped in a separate
patch.
2013-05-30 12:54:14 -04:00
Andreas Hansson
bf6291460d mem: Add a LPDDR3-1600 configuration
This patch adds a typical (leaning towards fast) LPDDR3 configuration
based on publically available data. As expected, it looks very similar
to the LPDDR2-S4 configuration, only with a slightly lower burst time.
2013-05-30 12:53:56 -04:00
Andreas Hansson
88aa7755f4 mem: Avoid explicitly zeroing the memory backing store
This patch removes the explicit memset as it is redundant and causes
the simulator to touch the entire space, forcing the host system to
allocate the pages.

Anonymous pages are mapped on the first access, and the page-fault
handler is responsible for zeroing them. Thus, the pages are still
zeroed, but we avoid touching the entire allocated space which enables
us to use much larger memory sizes as long as not all the memory is
actually used.
2013-05-30 12:53:54 -04:00
Anthony Gutierrez
d3c33d91b6 cpu: remove local/globalHistoryBits params from branch pred
having separate params for the local/globalHistoryBits and the
local/globalPredictorSize can lead to inconsistencies if they
are not carefully set. this patch dervies the number of bits
necessary to index into the local/global predictors based on
their size.

the value of the localHistoryTableSize for the ARM O3 CPU has been
increased to 1024 from 64, which is more accurate for an A15 based
on some correlation against A15 hardware.
2013-05-14 18:39:47 -04:00
Andreas Hansson
3477d60d5c config: Add a mem-type config option to se/fs scripts
This patch enables selection of the memory controller class through a
mem-type command-line option. Behind the scenes, this option is
treated much like the cpu-type, and a similar framework is used to
resolve the valid options, and translate the short-hand description to
a valid class.

The regression scripts are updated with a hardcoded memory class for
the moment. The best solution going forward is probably to get the
memory out of the makeSystem functions, but Ruby complicates things as
it does not connect the memory controller to the membus.

--HG--
rename : configs/common/CpuConfig.py => configs/common/MemConfig.py
2013-04-22 13:20:33 -04:00
Dam Sunwoo
2c1e344313 cpu: generate SimPoint basic block vector profiles
This patch is based on http://reviews.m5sim.org/r/1474/ originally written by
Mitch Hayenga. Basic block vectors are generated (simpoint.bb.gz in simout
folder) based on start and end addresses of basic blocks.

Some comments to the original patch are addressed and hooks are added to create
and resume from checkpoints based on instruction counts dictated by external
SimPoint analysis tools.

SimPoint creation/resuming options will be implemented as a separate patch.
2013-04-22 13:20:31 -04:00
Joel Hestness
82c6734f6b Configs: Fix handling of maxtick and take_checkpoints
In Simulation.py, calls to m5.simulate(num_ticks) will run the simulated system
for num_ticks after the current tick. Fix calls to m5.simulate in
scriptCheckpoints() and benchCheckpoints() to appropriately handle the maxticks
variable.
2013-04-09 16:25:30 -05:00
Nilay Vaish
433cab9d95 x86: create space in bios memory map
As of now, we mark the top 1MB of memory space as unusable. Part of
it is actually usable and is required to be marked so by some of the
newer versions of linux kernel. This patch marks the top 639KB as usable.
This value was chosen by looking at QEMU's output for bios memory map.
2013-03-28 09:34:15 -05:00
Nilay Vaish
546ffb2d6d config: return exit event instead of cause
changeset: a4739b6f799d made some changes that where an exit event
should have been returned in place of exit cause. This patch corrects
the error.
2013-03-22 17:31:24 -05:00
Ali Saidi
82cf1565d0 config: Fix --prog-interval command line option 2013-02-20 08:18:22 -05:00
Anthony Gutierrez
21aa950318 options: add command line option for dtb file 2013-02-15 18:48:59 -05:00
Andreas Sandberg
1c7aa665bf config: Remove O3 dependencies
The default cache configuration script currently import the O3_ARM_v7a
model configuration, which depends on the O3 CPU. This breaks if gem5
has been compiled without O3 support. This changeset removes the
dependency by only importing the model if it is requested by the
user. As a bonus, it actually removes some code duplication in the
configuration scripts.
2013-02-15 17:40:08 -05:00
Andreas Sandberg
e5dca84c3f config: Move CPU handover logic to m5.switchCpus()
CPU switching consists of the following steps:
 1. Drain the system
 2. Switch out old CPUs (cpu.switchOut())
 3. Change the system timing mode to the mode the new CPUs require
 4. Flush caches if switching to hardware virtualization
 5. Inform new CPUs of the handover (cpu.takeOverFrom())
 6. Resume the system

m5.switchCpus() previously only did step 2 & 5. Since information
about the new processors' memory system requirements is now exposed,
do all of the steps above.

This patch adds automatic memory system switching and flush (if
needed) to switchCpus(). Additionally, it adds optional draining to
switchCpus(). This has the following implications:

* changeToTiming and changeToAtomic are no longer needed, so they have
  been removed.

* changeMemoryMode is only used internally, so it is has been renamed
  to be private.

* switchCpus requires a reference to the system containing the CPUs as
  its first parameter.

WARNING: This changeset breaks compatibility with existing
configuration scripts since it changes the signature of
m5.switchCpus().
2013-02-15 17:40:08 -05:00
Andreas Sandberg
e9f66dceac config: Cleanup CPU configuration
The CPUs supported by the configuration scripts used to be
hard-coded. This was not ideal for several reasons. For example, the
configuration scripts depend on all CPU models even though only a
subset might have been compiled.

This changeset adds a new module to the configuration scripts that
automatically discovers the available CPU models from the compiled
SimObjects. As a nice bonus, the use of introspection allows us to
automatically generate a list of available CPU models suitable for
printing. This list is augmented with the Python doc string from the
underlying class if available.
2013-02-15 17:40:08 -05:00
Andreas Sandberg
7cd1fd4324 cpu: Add CPU metadata om the Python classes
The configuration scripts currently hard-code the requirements of each
CPU. This is clearly not optimal as it makes writing new configuration
scripts painful and adding new CPU models requires existing scripts to
be updated. This patch adds the following class methods to the base
CPU and all relevant CPUs:

 * memory_mode -- Return a string describing the current memory mode
                  (invalid/atomic/timing).

 * require_caches -- Does the CPU model require caches?

 * support_take_over -- Does the CPU support CPU handover?
2013-02-15 17:40:08 -05:00
Andreas Sandberg
6155400421 config: Don't call sys.exit in interactive mode in run()
The run() method in Simulation.py used to call sys.exit() when the
simulator exits. This is undesirable when user has requested the
simulator to be run in interactive mode since it causes the simulator
to exit rather than entering the interactive Python environment.
2013-02-10 13:23:54 +01:00
Andreas Hansson
c4898b15bc mem: Add DDR3 and LPDDR2 DRAM controller configurations
This patch moves the default DRAM parameters from the SimpleDRAM class
to two different subclasses, one for DDR3 and one for LPDDR2. More can
be added as we go forward.

The regressions that previously used the SimpleDRAM are now using
SimpleDDR3 as this is the most similar configuration.
2013-01-31 07:49:14 -05:00
Nilay Vaish ext:(%2C%20Timothy%20Jones%20%3Ctimothy.jones%40cl.cam.ac.uk%3E)
dbeabedaf0 branch predictor: move out of o3 and inorder cpus
This patch moves the branch predictor files in the o3 and inorder directories
to src/cpu/pred. This allows sharing the branch predictor across different
cpu models.

This patch was originally posted by Timothy Jones in July 2010
but never made it to the repository.

--HG--
rename : src/cpu/o3/bpred_unit.cc => src/cpu/pred/bpred_unit.cc
rename : src/cpu/o3/bpred_unit.hh => src/cpu/pred/bpred_unit.hh
rename : src/cpu/o3/bpred_unit_impl.hh => src/cpu/pred/bpred_unit_impl.hh
rename : src/cpu/o3/sat_counter.hh => src/cpu/pred/sat_counter.hh
2013-01-24 12:28:51 -06:00
Ali Saidi
fe3fbe624e config: Fix issue with changeset: a4739b6f799d. 2013-01-08 17:12:22 -05:00
Lluís Vilanova
807168a1de util: add m5_fail op.
Used as a command in full-system scripts helps the user ensure the benchmarks have finished successfully.

For example, one can use:

    /path/to/benchmark args || /sbin/m5 fail 1

and thus ensure gem5 will exit with an error if the benchmark fails.
2013-01-08 08:54:12 -05:00
Andreas Sandberg
2cfe62adc4 cpu: Rename defer_registration->switched_out
The defer_registration parameter is used to prevent a CPU from
initializing at startup, leaving it in the "switched out" mode. The
name of this parameter (and the help string) is confusing. This patch
renames it to switched_out, which should be more descriptive.
2013-01-07 13:05:45 -05:00
Andreas Hansson
e65de3f5ca config: Do not use hardcoded physmem in fs script
This patch generalises the address range resolution for the I/O cache
and I/O bridge such that they do not assume a single memory. The patch
involves adding a parameter to the system which is then defined based
on the memories that are to be visible from the I/O subsystem, whether
behind a cache or a bridge.

The change is needed to allow interleaved memory controllers in the
system.
2013-01-07 13:05:38 -05:00
Erik Tomusk
3dc7e4f496 TournamentBP: Fix some bugs with table sizes and counters
globalHistoryBits, globalPredictorSize, and choicePredictorSize are decoupled.
globalHistoryBits controls how much history is kept, global and choice
predictor sizes control how much of that history is used when accessing
predictor tables. This way, global and choice predictors can actually be
different sizes, and it is no longer possible to walk off the predictor arrays
and cause a seg fault.

There are now individual thresholds for choice, global, and local saturating
counters, so that taken/not taken decisions are correct even when the
predictors' counters' sizes are different.

The interface for localPredictorSize has been removed from TournamentBP because
the value can be calculated from localHistoryBits.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2012-12-06 09:31:06 -06:00
Andreas Hansson
13f6d29a76 config: Fix description of checkpoint option from cycle to tick
This patch merely updates the description of the "take-checkpoints"
option to reflect that it is specified in ticks and not in cycles.
2012-11-19 11:21:09 -05:00
Andreas Sandberg
dc01535c7e python: Rename doDrain()->drain() and make it do the right thing
There is no point in exporting the old drain() method in
Simulate.py. It should only be used internally by doDrain(). This
patch moves the old drain() method into doDrain() and renames
doDrain() to drain().
2012-11-02 11:32:02 -05:00
Andreas Sandberg
7e25052fee Partly revert [4f54b0f229b5] and move draining to m5.changeToTiming
Changeset 4f54b0f229b5 removed the call to doDrain in changeToTiming
based on the assumption that the system does not need draining when
running in atomic mode. This is a false assumption since at least the
System class requires the system to be drained before it allows
switching of memory modes. This patch reverts that part of the
changeset.
2012-11-02 11:32:00 -05:00
Andreas Hansson
9cbe1cb653 config: Unify caches used in regressions and adjust L2 MSHRs
This patch unified the L1 and L2 caches used throughout the
regressions instead of declaring different, but very similar,
configurations in the different scripts.

The patch also changes the default L2 configuration to match what it
used to be for the fs and se scripts (until the last patch that
updated the regressions to also make use of the cache config). The
MSHRs and targets per MSHR are now set to a more realistic default of
20 and 12, respectively.

As a result of both the aforementioned changes, many of the regression
stats are changed. A follow-on patch will bump the stats.
2012-10-30 07:44:08 -04:00
Andreas Hansson
651de2d9af config: Fix the cache class naming in regression scripts
This patch unifies the naming of the default L1 and L2 caches in the
regression configs to be in line with what is used in the se and fs
scripts.
2012-10-26 06:42:42 -04:00
Andreas Hansson
66e331c7bb config: Use SimpleDRAM in full-system, and with o3 and inorder
This patch favours using SimpleDRAM with the default timing instead of
SimpleMemory for all regressions that involve the o3 or inorder CPU,
or are full system (in other words, where the actual performance of
the memory is important for the overall performance).

Moving forward, the solution for FSConfig and the users of fs.py and
se.py is probably something similar to what we use to choose the CPU
type. I envision a few pre-set configurations SimpleLPDDR2,
SimpleDDR3, etc that can be choosen by a dram_type option. Feedback on
this part is welcome.

This patch changes plenty stats and adds all the DRAM controller
related stats. A follow-on patch updates the relevant statistics. The
total run-time for the entire regression goes up with ~5% with this
patch due to the added complexity of the SimpleDRAM model. This is a
concious trade-off to ensure that the model is properly tested.
2012-10-25 13:14:38 -04:00
Andreas Hansson
d22796c03c config: Use shared cache config for regressions
This patch uses the common L1, L2 and IOCache configuration for the
regressions that all share the same cache parameters. There are a few
regressions that use a slightly different configuration (memtest,
o3-timing=mp, simple-atomic-mp and simple-timing-mp), and the latter
are not changed in this patch. They will be updated in a future patch.

The common cache configurations are changed to match the ones used in
the regressions, and are slightly changed with respect to what they
were. Hopefully this means we can converge on a common base
configuration, used both in the normal user configurations and
regressions.

As only regressions that shared the same cache configuration are
updated, no regressions are affected.
2012-10-25 04:32:44 -04:00
Andreas Hansson
88554790c3 Mem: Use cycles to express cache-related latencies
This patch changes the cache-related latencies from an absolute time
expressed in Ticks, to a number of cycles that can be scaled with the
clock period of the caches. Ultimately this patch serves to enable
future work that involves dynamic frequency scaling. As an immediate
benefit it also makes it more convenient to specify cache performance
without implicitly assuming a specific CPU core operating frequency.

The stat blocked_cycles that actually counter in ticks is now updated
to count in cycles.

As the timing is now rounded to the clock edges of the cache, there
are some regressions that change. Plenty of them have very minor
changes, whereas some regressions with a short run-time are perturbed
quite significantly. A follow-on patch updates all the statistics for
the regressions.
2012-10-15 08:10:54 -04:00
Andreas Hansson
1c321b8847 Regression: Use CPU clock and 32-byte width for L1-L2 bus
This patch changes the CoherentBus between the L1s and L2 to use the
CPU clock and also four times the width compared to the default
bus. The parameters are not intending to fit every single scenario,
but rather serve as a better startingpoint than what we previously
had.

Note that the scripts that do not use the addTwoLevelCacheHiearchy are
not affected by this change.

A separate patch will update the stats.
2012-10-15 08:08:08 -04:00
Mrinmoy Ghosh
6fc0094337 Cache: add a response latency to the caches
In the current caches the hit latency is paid twice on a miss. This patch lets
a configurable response latency be set of the cache for the backward path.
2012-09-25 11:49:41 -05:00
Andreas Hansson
fccbf8bb45 AddrRange: Simplify AddrRange params Python hierarchy
This patch simplifies the Range object hierarchy in preparation for an
address range class that also allows striping (e.g. selecting a few
bits as matching in addition to the range).

To extend the AddrRange class to an AddrRegion, the first step is to
simplify the hierarchy such that we can make it as lean as possible
before adding the new functionality. The only class using Range and
MetaRange is AddrRange, and the three classes are now collapsed into
one.
2012-09-19 06:15:41 -04:00
Joel Hestness
234fa4cf7e Standard Switch: Drain the system before switching CPUs
When switching from an atomic CPU to any of the timing CPUs, a drain is
unnecessary since no events are scheduled in atomic mode. However, when
trying to switch CPUs starting with a timing CPU, there may be events
scheduled. This change ensures that all events are drained from the system
by calling m5.drain before switching CPUs.
2012-09-12 21:41:37 -05:00
Andreas Hansson
9ad7e23e9e Checkpoint: Pass maxtick to avoid undefined variable
This patch fixes a bug in scriptCheckpoints, where maxtick was used
undefined. The bug caused checkpointing by means of --take-checkpoints
to fail.
2012-09-11 14:14:51 -04:00
Nilay Vaish
0b45ae5df3 se.py: support specifying multiple programs via command line
This patch allows for specifying multiple programs via command line. It also
adds an option for specifying whether to use of SMT. But SMT does not work for
the o3 cpu as of now.
2012-09-09 09:33:45 -05:00
Andreas Hansson
a6074016e2 Bridge: Remove NACKs in the bridge and unify with packet queue
This patch removes the NACKing in the bridge, as the split
request/response busses now ensure that protocol deadlocks do not
occur, i.e. the message-dependency chain is broken by always allowing
responses to make progress without being stalled by requests. The
NACKs had limited support in the system with most components ignoring
their use (with a suitable call to panic), and as the NACKs are no
longer needed to avoid protocol deadlocks, the cleanest way is to
simply remove them.

The bridge is the starting point as this is the only place where the
NACKs are created. A follow-up patch will remove the code that deals
with NACKs in the endpoints, e.g. the X86 table walker and DMA
port. Ultimately the type of packet can be complete removed (until
someone sees a need for modelling more complex protocols, which can
now be done in parts of the system since the port and interface is
split).

As a consequence of the NACK removal, the bridge now has to send a
retry to a master if the request or response queue was full on the
first attempt. This change also makes the bridge ports very similar to
QueuedPorts, and a later patch will change the bridge to use these. A
first step in this direction is taken by aligning the name of the
member functions, as done by this patch.

A bit of tidying up has also been done as part of the simplifications.

Surprisingly, this patch has no impact on any of the
regressions. Hence, there was never any NACKs issued. In a follow-up
patch I would suggest changing the size of the bridge buffers set in
FSConfig.py to also test the situation where the bridge fills up.
2012-08-22 11:39:58 -04:00