sanchayanmaity/gem5
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
6673 commits 2 branches 0 tags 204 MiB
Commit graph

6673 commits

This branch
This branch
All branches
Author SHA1 Message Date
Gabe Black
5f164ba720 X86: Actually handle 16 bit mode modrm. 2009-04-19 04:14:31 -07:00
Gabe Black
93cccf7d19 X86: Make the TEST instruction set all the flags it's supposed to. 2009-04-19 04:14:16 -07:00
Gabe Black
f82c123242 X86: Implement broadcast IPIs. 2009-04-19 04:14:01 -07:00
Gabe Black
829e424353 X86: Fix the ordering of the vendor string reported by CPUID. 2009-04-19 04:13:45 -07:00
Gabe Black
8b2ac20753 X86: Keep track of what the initial count value was in the LAPIC timer. 2009-04-19 03:56:57 -07:00
Gabe Black
18b3863127 X86: Only recognize the first startup IPI after INIT or reset. 2009-04-19 03:56:36 -07:00
Gabe Black
4d32cd10ce X86: Use recvResponse to implement the idle bit in the Local APIC ICR. 2009-04-19 03:56:24 -07:00
Gabe Black
bdda224d41 X86: Add a function which gets called when an interrupt message has been delivered. 2009-04-19 03:54:11 -07:00
Gabe Black
3031af21c7 X86: Fix the flags for interrupt response messages. 2009-04-19 03:53:29 -07:00
Gabe Black
3eed59768c X86: Explicitly use the right width in a few places that need a 64 bit value. 2009-04-19 03:47:59 -07:00
Gabe Black
8761057c78 X86: Keep track of the pioAddr for the local APIC. 2009-04-19 03:47:12 -07:00
Gabe Black
038225a6ca X86: Implement far jmp. 2009-04-19 03:42:41 -07:00
Gabe Black
3b1b21cb15 X86: Some segment selectors can be used when "NULL". 2009-04-19 03:41:10 -07:00
Gabe Black
a0cc081997 X86: Fix a bug in the chks microop where it ignored that it found a fault. 2009-04-19 03:40:08 -07:00
Gabe Black
f2ff5b9249 X86: Make the interrupt entering microcode record the value to use, not actually use it. 2009-04-19 03:36:57 -07:00
Gabe Black
35eea4191b X86: LEA calculates an address before segmentation. 2009-04-19 03:24:51 -07:00
Gabe Black
bdd55ec8b6 X86: Implement the save machine status word instruction (SMSW). 2009-04-19 03:22:38 -07:00
Gabe Black
d86cd1d2a0 X86: Implement the load machine status word instruction (LMSW). 2009-04-19 03:17:14 -07:00
Gabe Black
b4ad233c0c X86: Update the stats for the fix for CPUID. 2009-04-19 03:14:33 -07:00
Gabe Black
eba640c963 X86: Only use %eax to select a function and look like we support sse2. 2009-04-19 03:11:24 -07:00
Gabe Black
27e54982b4 X86: Fix the mov to segment selector in real mode instruction microcode. 2009-04-19 03:08:40 -07:00
Gabe Black
633c96bd85 X86: The startup IPI delivery mode is not reserved. 2009-04-19 03:01:46 -07:00
Gabe Black
08f021aad0 X86: Implement the STARTUP IPI. 2009-04-19 02:56:03 -07:00
Gabe Black
d277feb925 X86: Implement the INIT IPI. 2009-04-19 02:53:00 -07:00
Gabe Black
a340b214cf X86: Fix the halt microop. 2009-04-19 02:51:09 -07:00
Gabe Black
641513fe08 X86: Start implementing the interrupt command register in the local APIC. 2009-04-19 02:43:22 -07:00
Gabe Black
9549694ecd X86: Make code that sends an interrupt from the IO APIC available for IPIs. 2009-04-19 02:42:19 -07:00
Gabe Black
06d25dcd26 X86: Automatically make the IO APIC in an N CPU system have id N+1. 2009-04-19 02:39:19 -07:00
Gabe Black
d10195b1a4 CPU: If the simple CPU is already idle, just return from suspendContext, don't assert. 2009-04-19 02:23:29 -07:00
Gabe Black
05b5861419 X86: Condense the startupCPU code. 2009-04-19 02:20:57 -07:00
Gabe Black
f668340f2c X86: Set the local APIC ID to something meaningful. 2009-04-19 02:16:49 -07:00
Gabe Black
79a3a6aecb X86: Don't pretend to be an AMD CPU any more. We're not good enough at it. 2009-04-19 02:06:51 -07:00
Korey Sewell
a25aa00522 o3-mips-regress: add hello word regression. 2009-04-18 10:42:29 -04:00
Korey Sewell
d8a34a9745 mips-tlb-fix: check for alignment faults.\nMIPS was never updated to use TLBS correcty in SE mode. The error was forwarding translations directly to pageTable. The TLB should check for alignment faults at bare minimum here but in the long run we should be using TLBs in SE mode for MIPS. 2009-04-18 10:42:29 -04:00
Korey Sewell
e501e1af54 mips-syscall: mark with correct flag. \nMIPS was using wrong serialization flag on syscall instructions allowing O3 to handle SE mode syscalls incorrectly and speculate on instructions after a syscall 2009-04-18 10:42:29 -04:00
Korey Sewell
5c1742b822 o3-delay-slot-bpred: fix decode stage handling of uncdtl. branches.\n decode stage was not setting the predicted PC correctly or passing that information back to fetch correctly 2009-04-18 10:42:29 -04:00
Korey Sewell
cc9e834e93 mips-shadowsets: fix calcuations. \n Remove Shadowsets from Int & Arch. Reg Calculations 2009-04-18 10:42:28 -04:00
Steve Reinhardt
14808ecac9 o3, inorder: fix FS bug due to initializing ThreadState to Halted. 
For some reason o3 FS init() only called initCPU if the thread state
was Suspended, which was no longer the case.  There's no apparent
reason to check, so I whacked the test completely rather than
changing the check to Halted.
The inorder init() was also updated to be symmetric, though the
previous code was just a fancy no-op.
 2009-04-17 16:54:58 -07:00
Steve Reinhardt
b146131d18 o3: handle fetch with no active threads correctly. 
This situation can arise now on the first fetch cycle after
the last active thread is halted.  It seems easy enough to
deal with when it happens rather than trying to avoid it.
 2009-04-15 23:12:00 -07:00
Steve Reinhardt
bb974d5a47 o3: fix {read,set}ArchFloatReg* functions. 
Register indices were not being calculated properly.
 2009-04-15 23:10:43 -07:00
Steve Reinhardt
7617dcf736 ThreadState: initialize status to Halted in constructor. 
This provides a common initial status for all threads independent
of CPU model (unlike the prior situation where CPUs initialized
threads to inconsistent states).
This mostly matters for SE mode; in FS mode, ISA-specific startupCPU()
methods generally handle boot-time initialization of thread contexts
(since the right thing to do is ISA-dependent).
 2009-04-15 13:18:24 -07:00
Steve Reinhardt
48d4ca522a Update stats after elimination of Unallocated state. 
Somehow ending threads with halt() instead of deallocate()
reduces the squash count on o3 by 1 (and a few other
similarly trivial changes).
 2009-04-15 13:13:58 -07:00
Steve Reinhardt
8882dc1283 Get rid of the Unallocated thread context state. 
Basically merge it in with Halted.
Also had to get rid of a few other functions that
called ThreadContext::deallocate(), including:
 - InOrderCPU's setThreadRescheduleCondition.
 - ThreadContext::exit().  This function was there to avoid terminating
   simulation when one thread out of a multi-thread workload exits, but we
   need to find a better (non-cpu-centric) way.
 2009-04-15 13:13:47 -07:00
Steve Reinhardt
9b66e82897 configs: Allow M5_CPU2000 env var to set CPU2K binary path. 
It would be nice to have a more comprehensive mechanism
but this is a big improvement over manually editing the script.
 2009-04-15 12:52:31 -07:00
Gabe Black
5c79191603 X86: Fix minor bug in the page table walker from TLB shuffling. 2009-04-13 04:14:15 -07:00
Nathan Binkert
c87c9950df stats: disallow duplicate statistic names. 2009-04-08 22:22:50 -07:00
Nathan Binkert
18a30524d6 alpha: get rid of all turbolaser remnants 2009-04-08 22:22:49 -07:00
Nathan Binkert
374ba9bae3 tests: update tests for TLB unification 2009-04-08 22:21:30 -07:00
Nathan Binkert
e0de2c3443 tlb: More fixing of unified TLB 2009-04-08 22:21:27 -07:00
Gabe Black
7b5a96f06b tlb: Don't separate the TLB classes into an instruction TLB and a data TLB 2009-04-08 22:21:27 -07:00