When accessing arguments for a syscall, the position of an argument depends on
the policies of the ISA, how much space preceding arguments took up, and the
"alignment" of the index for this particular argument into the number of
possible storate locations. This change adjusts getSyscallArg to take its
index parameter by reference instead of value and to adjust it to point to the
possible location of the next argument on the stack, basically just after the
current one. This way, the rules for the new argument can be applied locally
without knowing about other arguments since those have already been taken into
account implicitly.
All system calls have also been changed to reflect the new interface. In a
number of cases this made the implementation clearer since it encourages
arguments to be collected in one place in order and then used as necessary
later, as opposed to scattering them throughout the function or using them in
place in long expressions. It also discourages using getSyscallArg over and
over to retrieve the same value when a temporary would do the job.
This adds support for the 32-bit, big endian Power ISA. This supports both
integer and floating point instructions based on the Power ISA Book I v2.06.
Glibc often assumes that memory it receives from the kernel after a brk
system call will contain only zeros. This is important during a calloc,
because it won't clear the new memory itself. In the simulator, if the
new page exists, it will be cleared using this patch, to mimic the kernel's
functionality.
Get rid of misc.py and just stick misc things in __init__.py
Move utility functions out of SCons files and into m5.util
Move utility type stuff from m5/__init__.py to m5/util/__init__.py
Remove buildEnv from m5 and allow access only from m5.defines
Rename AddToPath to addToPath while we're moving it to m5.util
Rename read_command to readCommand while we're moving it
Rename compare_versions to compareVersions while we're moving it.
--HG--
rename : src/python/m5/convert.py => src/python/m5/util/convert.py
rename : src/python/m5/smartdict.py => src/python/m5/util/smartdict.py
Using a look up table changed the run time of the SPARC_FS solaris boot
regression from:
real 14m45.951s
user 13m57.528s
sys 0m3.452s
to:
real 12m19.777s
user 12m2.685s
sys 0m2.420s
Start by turning all of the *Source functions into classes
so we can do more calculations and more easily collect the data we need.
Add parameters to the new classes for indicating what sorts of flags the
objects should be compiled with so we can allow certain files to be compiled
without Werror for example.
This patch adds limited multithreading support in syscall-emulation
mode, by using the clone system call. The clone system call works
for Alpha, SPARC and x86, and multithreaded applications run
correctly in Alpha and SPARC.
Basically merge it in with Halted.
Also had to get rid of a few other functions that
called ThreadContext::deallocate(), including:
- InOrderCPU's setThreadRescheduleCondition.
- ThreadContext::exit(). This function was there to avoid terminating
simulation when one thread out of a multi-thread workload exits, but we
need to find a better (non-cpu-centric) way.
This is mainly to allow the unit test to run without requiring the standard
M5 stats from being initialized (e.g. sim_seconds, sim_ticks, host_seconds)
Bogus calls to ChunkGenerator with negative size were triggering
a new assertion that was added there.
Also did a little renaming and cleanup in the process.
We need to add a reference when an object is put on the C++ queue, and remove
a reference when the object is removed from the queue. This was not happening
before and caused a memory problem.
the primary identifier for a hardware context should be contextId(). The
concept of threads within a CPU remains, in the form of threadId() because
sometimes you need to know which context within a cpu to manipulate.
SE. Process still keeps track of the tc's it owns, but registration occurs
with the System, this eases the way for system-wide context Ids based on
registration.
across the subclasses. generally make it so that member data is _cpuId and
accessor functions are cpuId(). The ID val comes from the python (default -1 if
none provided), and if it is -1, the index of cpuList will be given. this has
passed util/regress quick and se.py -n4 and fs.py -n4 as well as standard
switch.
Since I never implemented a proper solution, put it back to something that
at least works for now. Once I add more event queues, I'll have to really
fix this though
The major thrust of this change is to limit the amount of code
duplication surrounding the code for these functions. This code also
adds two new message types called info and hack. Info is meant to be
less harsh than warn so people don't get confused and start thinking
that the simulator is broken. Hack is a way for people to add runtime
messages indicating that the simulator just executed a code "hack"
that should probably be fixed. The benefit of knowing about these
code hacks is that it will let people know what sorts of inaccuracies
or potential bugs might be entering their experiments. Finally, I've
added some flags to turn on and off these message types so command
line options can change them.
Make them easier to express by only having the cxx_type parameter which
has the full namespace name, and drop the cxx_namespace thing.
Add support for multiple levels of namespace.
Since the early days of M5, an event needed to know which event queue
it was on, and that data was required at the time of construction of
the event object. In the future parallelized M5, this sort of
requirement does not work well since the proper event queue will not
always be known at the time of construction of an event. Now, events
are created, and the EventQueue itself has the schedule function,
e.g. eventq->schedule(event, when). To simplify the syntax, I created
a class called EventManager which holds a pointer to an EventQueue and
provides the schedule interface that is a proxy for the EventQueue.
The intent is that objects that frequently schedule events can be
derived from EventManager and then they have the schedule interface.
SimObject and Port are examples of objects that will become
EventManagers. The end result is that any SimObject can just call
schedule(event, when) and it will just call that SimObject's
eventq->schedule function. Of course, some objects may have more than
one EventQueue, so this interface might not be perfect for those, but
they should be relatively few.
Targets look like libm5_debug.so. This target can be dynamically
linked into another C++ program and provide just about all of the M5
features. Additionally, this library is a standalone module that can
be imported into python with an "import libm5_debug" type command
line.
A whole bunch of stuff has been converted to use the new params stuff, but
the CPU wasn't one of them. While we're at it, make some things a bit
more stylish. Most of the work was done by Gabe, I just cleaned stuff up
a bit more at the end.
This should allow m5 to be more easily embedded into other simulators.
The m5 binary adds a simple main function which then calls into the m5
libarary to start the simulation. In order to make this work
correctly, it was necessary embed python code directly into the
library instead of the zipfile hack. This is because you can't just
append the zipfile to the end of a library the way you can a binary.
As a result, Python files that are part of the m5 simulator are now
compile, marshalled, compressed, and then inserted into the library's
data section with a certain symbol name. Additionally, a new Importer
was needed to allow python to get at the embedded python code.
Small additional changes include:
- Get rid of the PYTHONHOME stuff since I don't think anyone ever used
it, and it just confuses things. Easy enough to add back if I'm wrong.
- Create a few new functions that are key to initializing and running
the simulator: initSignals, initM5Python, m5Main.
The original code for creating libm5 was inspired by a patch Michael
Adler, though the code here was done by me.
- Add the option of redirecting stderr to a file. With the old
behaviour, stderr would follow stdout if stdout was to a file, but
stderr went to the host stderr if stdout went to the host stdout. The
new default maintains stdout and stderr going to the host. Now the
two can specify different files, but they will share a file descriptor
if the name of the files is the same.
- Add --output and --errout options to se.py to go with --input.
- insert warnings for deprecated m5ops
- reserve opcodes for Ali's stuff
- remove code for stuff that has been deprecated forever
- simplify m5op_alpha
The status quo is preferred since it is less likely that people will
rely on LIFO than FIFO, and when we move to a parallelized M5, no
ordering between events of the same time/priority will be guaranteed.
linked list sorted by time and priority. For things of the same time
and priority, a second, circularly linked list maintains the data
structure. Events of the same time and priority are now inserted in
FIFO order instead of LIFO order. This dramatically improves the
performance of systems that schedule multiple events at the same time.
The FIFO order version is not preferred to LIFO (because it may cause
people to rely on it), but I'm going to commit it anyway and
immediately commit the preferred LIFO version on top.
This appears to work, but I don't want to commit it until it gets tested a lot more.
I haven't deleted the functionality in this patch that will come later, but one question
is how to enforce encourage objects that call getVirtPort() to not cache the virtual port
since if the CPU changes out from under them it will be worse than useless. Perhaps a null
function like delVirtPort() is still useful in that case.
file descriptors are reopened and the file pointer is in the same
place as when the checkpoint occured.
Signed-off by: Ali Saidi
--HG--
extra : convert_revision : d9d2cd388c9c02f60e1269d6845891c35f94fc47
Also some bug fixes in MIPS ISA uncovered by g++ warnings
(Python string compares don't work in C++!).
--HG--
extra : convert_revision : b347cc0108f23890e9b73b3ee96059f0cea96cf6
SimObjects not yet updated:
- Process and subclasses
- BaseCPU and subclasses
The SimObject(const std::string &name) constructor was removed. Subclasses
that still rely on that behavior must call the parent initializer as
: SimObject(makeParams(name))
--HG--
extra : convert_revision : d6faddde76e7c3361ebdbd0a7b372a40941c12ed
The page table now stores actual page table entries. It is still a templated
class here, but this will be corrected in the near future.
--HG--
extra : convert_revision : 804dcc6320414c2b3ab76a74a15295bd24e1d13d
This requires us to not use PyRun_SimpleString, but PyRun_String since the
latter actually returns a result
--HG--
extra : convert_revision : 3e3916ddd7eef9957569d8e72e73ba4c3160ce20
Add support for declaring SimObjects to swig so their members can be wrapped.
Make sim_object.i only contain declarations for SimObject.
Create system.i to contain declarations for System.
Update python code to properly call the C++ given the new changes.
--HG--
extra : convert_revision : 82076ee69e8122d56e91b92d6767e356baae420a
Move the argument files to src/sim and add a utility.cc file with a function
getArguments() that returns the given argument in the architecture specific fashion.
getArguments() was getArg() is the architecture specific Argument class and has had
all magic numbers replaced with meaningful constants. Also add a function to the
Argument class for testing if an argument is NULL.
--HG--
rename : src/arch/alpha/arguments.cc => src/sim/arguments.cc
rename : src/arch/alpha/arguments.hh => src/sim/arguments.hh
extra : convert_revision : 8b93667bafaa03b52aadb64d669adfe835266b8e
The initial stack frame for x86 is now substantially more correct. The fixes made here can be back ported to SPARC and possible the other ISAs as well. The auxiliary vector types were moved to the LiveProcess base class because they are independent of ISA. Some of the types may only apply to Linux, though, so they may have to be moved.
--HG--
extra : convert_revision : 89ace35fcc8eb9586d2fee8eeccbc3686499ef24
Code was assuming that all argument registers followed in order from ArgumentReg0. There is now an ArgumentReg array which is indexed to find the right index. There is a constant, NumArgumentRegs, which can be used to protect against using an invalid ArgumentReg.
--HG--
extra : convert_revision : f448a3ca4d6adc3fc3323562870f70eec05a8a1f
creation and initialization now happens in python. Parameter objects
are generated and initialized by python. The .ini file is now solely for
debugging purposes and is not used in construction of the objects in any
way.
--HG--
extra : convert_revision : 7e722873e417cb3d696f2e34c35ff488b7bff4ed
supposed to and make sure parameters have the right type.
Also make sure that any object that should be an intermediate
type has the right options set.
--HG--
extra : convert_revision : d56910628d9a067699827adbc0a26ab629d11e93
