Commit graph

237 commits

Author SHA1 Message Date
Ali Saidi
ecbb8debf6 Many more fixes for SPARC_FS. Gets us to the point where SOFTINT starts
getting touched.

configs/common/FSConfig.py:
    Physical memory on the T1 starts at 1MB, The first megabyte is unmapped to catch bugs
src/arch/isa_parser.py:
    we should readmiscregwitheffect not readmiscreg
src/arch/sparc/asi.cc:
    Fix AsiIsNucleus spelling with respect to header file
    Add ASI_LSU_CONTROL_REG to AsiSiMmu
src/arch/sparc/asi.hh:
    Fix spelling of two ASIs
src/arch/sparc/isa/decoder.isa:
    switch back to defaults letting the isa_parser insert readMiscRegWithEffect
src/arch/sparc/isa/formats/mem/util.isa:
    Flesh out priviledgedString with hypervisor checks
    Make load alternate set the flags correctly
src/arch/sparc/miscregfile.cc:
    insert some forgotten break statements
src/arch/sparc/miscregfile.hh:
    Add some comments to make it easier to find which misc register is which number
src/arch/sparc/tlb.cc:
    flesh out the tlb memory mapped registers a lot more
src/base/traceflags.py:
    add an IPR traceflag
src/mem/request.hh:
    Fix a bad assert() in request

--HG--
extra : convert_revision : 1e11aa004e8f42c156e224c1d30d49479ebeed28
2006-12-06 14:29:10 -05:00
Lisa Hsu
e86832bed8 automatically build sparc system or alpha system.
configs/example/fs.py:
    make it an automatic system build for alpha vs. sparc.

--HG--
extra : convert_revision : 4c217cf9309c6209be7f80e358f6640857a785e8
2006-12-04 19:37:50 -05:00
Lisa Hsu
0d62558d55 Merge zizzer:/bk/sparcfs
into  zed.eecs.umich.edu:/z/hsul/work/sparc/m5

--HG--
extra : convert_revision : 3bce43982689e9bda3a12e21a24b5ea390f347b8
2006-12-04 17:51:07 -05:00
Ali Saidi
92c5a5c8cb More changes to get SPARC fs closer. Now at 1.2M cycles before difference
configs/common/FSConfig.py:
    seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
    change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
    For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
    Use instruction count from cpu rather than cycles because that is what legion does
    we can change it back after were done with legion
src/base/bitfield.hh:
    add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
    add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
    compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
    change asserts of packet success to if panics wrapped with NDEBUG defines
    so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
    expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
    convert some tabs to spaces
src/python/m5/objects/T1000.py:
    add more fake devices for each l1 bank and each memory controller

--HG--
extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
2006-12-04 00:54:40 -05:00
Lisa Hsu
55b4ea0444 Merge zizzer:/bk/sparcfs
into  zed.eecs.umich.edu:/z/hsul/work/sparc/m5

--HG--
extra : convert_revision : 07119747d9b08ea51f21942e36f22afcc62f16e1
2006-12-01 15:04:48 -05:00
Ali Saidi
8c4f7a0404 Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
Add the ability to use an address mask for symbol loading
Rather then silently failing on platform accesses panic
Move BadAddr/IsaFake no Device from Tsunami
Let the system kernel be none, but warn about it

configs/common/FSConfig.py:
    We don't have a kernel for sparc yet
src/arch/sparc/system.cc:
    Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
src/base/loader/aout_object.cc:
src/base/loader/aout_object.hh:
src/base/loader/ecoff_object.cc:
src/base/loader/ecoff_object.hh:
src/base/loader/elf_object.cc:
src/base/loader/elf_object.hh:
src/base/loader/object_file.hh:
src/base/loader/raw_object.cc:
src/base/loader/raw_object.hh:
    Add the ability to use an address mask for symbol loading
src/dev/sparc/t1000.cc:
    Rather then silently failing on platform accesses panic
src/dev/sparc/t1000.hh:
    fix up a couple of platform comments
src/python/m5/objects/Bus.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/T1000.py:
src/python/m5/objects/Tsunami.py:
    Move BadAddr/IsaFake no Device from Tsunami
src/python/m5/objects/System.py:
    Let kernel be none
src/sim/system.cc:
    Let the system kernel be none, but warn about it

--HG--
extra : convert_revision : 92f6afef599a3d3c7c5026d03434102c41c7b5f4
2006-11-30 15:51:54 -05:00
Lisa Hsu
df6c12e716 netperf-maerts-client.rcS:
change /netperf/netperf to /netperf-bin/netperf
nat-netperf-maerts-client.rcS:
bad comment that went with the file - accidentally committed but probably doesn't matter, i ust eliminated an ivlb in the script.

configs/boot/nat-netperf-maerts-client.rcS:
    replace netperf/netperf with netperf-bin/netperf
configs/boot/netperf-maerts-client.rcS:
    change /netperf/netperf to /netperf-bin/netperf

--HG--
extra : convert_revision : 32fed0042e267f315d3e688ebc4b66d7002b85f0
2006-11-30 11:53:33 -05:00
Gabe Black
5bdf4400b2 Merge zizzer:/bk/sparcfs
into  zower.eecs.umich.edu:/eecshome/m5/newmemmid

src/arch/sparc/isa_traits.hh:
src/arch/sparc/miscregfile.hh:
    hand merge

--HG--
extra : convert_revision : 34f50dc5e6e22096cb2c08b5888f2b0fcd418f3e
2006-11-29 17:34:20 -05:00
Kevin Lim
07e525e8b7 Include check for making sure caches are enabled.
--HG--
extra : convert_revision : e3902b065db524ebe5bf762e44a840133ccb8d75
2006-11-26 11:46:58 -05:00
Gabe Black
f85082e0a0 Added a parameter to set memory to zero. This is to support Legion, and once we can make our own hypervisor binary, we probably won't need it.
--HG--
extra : convert_revision : 168883e4a5d3760962cd9759a6f41c66f5a6402a
2006-11-22 23:09:27 -05:00
Gabe Black
0a99750ebf Merge zizzer:/bk/sparcfs
into  zower.eecs.umich.edu:/eecshome/m5/newmem

--HG--
extra : convert_revision : 75f3398e38e18eb1f8248e23708d7a8d8cce0fc5
2006-11-22 15:45:32 -05:00
Gabe Black
cd2727694d Add in rom/rams for the nvram, hypervisor description, and partition description.
--HG--
extra : convert_revision : a49de5fcfbea307c971964b8a68b95eb5d9a2bf4
2006-11-20 17:59:35 -05:00
Nathan Binkert
bd8cc37650 Implement a single config file to encompass all of the SPEC
CPU2000 stuff, and use it in all of the tests that currently
use SPEC

--HG--
extra : convert_revision : 8cd26a597e51a90b6d2810d344a075f5aa0f011b
2006-11-16 13:10:38 -08:00
Gabe Black
74654ddd1f Merge zower.eecs.umich.edu:/home/gblack/m5/newmemmemops
into  zower.eecs.umich.edu:/eecshome/m5/newmem

--HG--
extra : convert_revision : 74b2352b8f088e38cd1ecf3a8233b45df0476d93
2006-11-16 14:42:44 -05:00
Gabe Black
cd5b33b9ff Fixes for SPARC_FS
configs/common/FSConfig.py:
    Make a SPARC system create an IO bus.
src/python/m5/objects/T1000.py:
    Create a T1000 platform
src/arch/sparc/miscregfile.cc:
    Initialize the strand status register to the value legion provides.
src/cpu/exetrace.cc:
    Truncate an ExtMachInst to a MachInst before comparing with Legion.

--HG--
extra : convert_revision : e4189b572a5297e8362f5bd26d87b74736c8e5f1
2006-11-16 12:34:10 -05:00
Ron Dreslinski
dbdf2f14ae Add L2 cache option to fs.py --l2cache
--HG--
extra : convert_revision : 5bdd1129c3b23e91d441e7b83f6a824ef7740fab
2006-11-15 18:22:15 -05:00
Ron Dreslinski
023fccff0e Update splash2 config files
configs/splash2/run.py:
    Fix MaxTick for splash configs
configs/splash2/cluster.py:
    Add a config that allows clusters of CPU's to be attached to a single L1

--HG--
extra : convert_revision : 1bb0a0c5f4889316940a9858be90ae2eaa849f1a
2006-11-13 16:09:47 -05:00
Kevin Lim
3052632b68 Merge ktlim@zamp:./local/clean/tmp/test-regress
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix

--HG--
extra : convert_revision : b98236507bb8996ce605b48b5a5a6a7aac297dc5
2006-11-12 21:57:58 -05:00
Ron Dreslinski
6098f57b08 Update for maxtick in splash2/memtest configs
configs/example/memtest.py:
configs/splash2/run.py:
    Update for maxtick

--HG--
extra : convert_revision : 94106625be1ebc2b614db16720a4861e47222c0b
2006-11-12 11:42:07 -05:00
Kevin Lim
73581bf801 Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix

--HG--
extra : convert_revision : 56cb7fe3be5b63bd89b48ac6cb88b47d13b4c137
2006-11-10 12:14:38 -05:00
Ali Saidi
cb172d0332 Get SPARC to the point that it starts running. Add ability to load the ROM bin files, cleanup lockstep printing a bit
Since we don't have a platform yet, you need to comment out the default responder stuff in Bus.py to make it work.

SConstruct:
    Add TARGET_ISA to the list of environment variables that end up in the build_env for python
configs/common/FSConfig.py:
    add a simple SPARC system to being testing with, you'll need to change makeLinuxAlphaSystem to makeSparcSystem in fs.py for now
src/SConscript:
    add a raw file object, at least until we get more info about how to compile openboot properly
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
    add parameters for ROM files (OBP/Reset/Hypervisor), a ROM, load files into ROM
src/base/loader/object_file.cc:
src/base/loader/object_file.hh:
    add option to try raw when nothing works
src/cpu/exetrace.cc:
    cleanup lockstep printing a little bit
src/cpu/m5legion_interface.h:
    change the instruction to be 32 bits because it is
src/mem/physical.cc:
    fix assert that doesn't work if memory starts somewhere above 0
src/python/m5/objects/BaseCPU.py:
    Add if statement to choose between sparc tlbs and alpha tlbs
src/python/m5/objects/System.py:
    Add a sparc system that sets the rom addresses correctly
src/python/m5/params.py:
    add the ability to add Addr() together

--HG--
extra : convert_revision : bbbd8a56134f2dda2728091f740e2f7119b0c4af
2006-11-09 18:22:46 -05:00
Kevin Lim
6591ebb098 Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix

--HG--
extra : convert_revision : dafe2d4a032b277c219ea13faf20567c20c1f2f4
2006-11-09 15:06:00 -05:00
Kevin Lim
0ba2cc6571 Clean up config scripts to not have to worry about attaching a cache only to the TimingCPU. Now the Atomic CPU works with caches.
configs/common/Simulation.py:
    Atomic CPU now works properly with caches, so we don't have to do extra parsing to hook up caches only to the timing CPU.

    However the O3CPU must always use caches, so a check for that must still exist.

    Also change the switch_cpus to be placed at the system level, now that Steve changed how the IntrController gets its CPU.
configs/example/fs.py:
configs/example/se.py:
    Atomic CPU now handles caches.

--HG--
extra : convert_revision : 534ded558ef96cafd76b4b5c5317bd8f4d05076e
2006-11-09 15:05:13 -05:00
Lisa Hsu
64c0d82dec simplify maxtick parsing in both the python and the c++.
configs/common/Simulation.py:
    simplify maxtick code a little bit - instead of checking for -1, just set it at MaxTick.
src/python/m5/__init__.py:
    make a new m5 param called MaxTick.
src/sim/host.hh:
    fix the M5 def. of MaxTick
src/sim/main.cc:
    Simplify the MaxTick/num_cycles parsing within main.cc

--HG--
extra : convert_revision : f800addfbc1323591c2e05b892276b439b671668
2006-11-08 15:05:23 -05:00
Lisa Hsu
5a46f336a1 make rcS files read from the m5 source directory, not /dist.
--HG--
extra : convert_revision : 45a2dbf5b05b19dd60fbc3a5b10e9355c8351e3b
2006-11-08 14:10:25 -05:00
Lisa Hsu
0a0d9cd3ab change to os.path.join like nate wanted.
--HG--
extra : convert_revision : 6e8a0153adf04f0cc07904434e4cb6a83fe900eb
2006-11-08 14:01:23 -05:00
Lisa Hsu
74ff45d353 factor some more commone code and enable going from checkpoint into arbitrary CPU with or without caches.
configs/common/Simulation.py:
    enable going from checkpoint into arbitrary CPU with or without caches.

--HG--
extra : convert_revision : 02e7ff8982fdb3a08bc609f89bd58df5b3a581b2
2006-11-01 19:25:09 -05:00
Lisa Hsu
7665be4f70 make it so that you can do a standard switch without the caches option. this will have only the o3 cpu have a cache, rather than timing (warmup) + o3 have cache.
--HG--
extra : convert_revision : d733de7ebb362bbd7376a0235ee7f117df2d6d37
2006-11-01 11:49:39 -05:00
Lisa Hsu
9ef8bf74c7 change name of 2nd switch_cpu so that ckpt recovery with multiple cpus doens't get confused.
--HG--
extra : convert_revision : 16c710c4196c520d03c1993a26f38cf1f04ab637
2006-11-01 11:40:49 -05:00
Kevin Lim
f763864786 Fix up configs.
configs/common/Simulation.py:
    Remove mem parameter.
configs/example/se.py:
    Remove debug output that got included in my other push.

--HG--
extra : convert_revision : 643c34147f6c6cbb98b8e6d6e8206b9859593ab0
2006-10-31 14:58:09 -05:00
Kevin Lim
5825a6c9d8 Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix

configs/example/fs.py:
configs/example/se.py:
src/mem/tport.hh:
    Hand merge.

--HG--
extra : convert_revision : b9df95534d43b3b311f24ae24717371d03d615bf
2006-10-31 14:37:19 -05:00
Kevin Lim
bfd5eb2b08 Remove mem parameter. Now the translating port asks the CPU's dcache's peer for its MemObject instead of having to have a paramter for the MemObject.
configs/example/fs.py:
configs/example/se.py:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.cc:
src/cpu/thread_state.hh:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
    No need for mem parameter any more.
src/cpu/checker/cpu.cc:
    Use new constructor for simple thread (no more MemObject parameter).
src/cpu/checker/cpu.hh:
    Remove MemObject parameter.
src/cpu/memtest/memtest.hh:
    Ports now take in their MemObject owner.
src/cpu/o3/alpha/cpu_builder.cc:
    Remove mem parameter.
src/cpu/o3/alpha/cpu_impl.hh:
    Remove memory parameter and clean up handling of TranslatingPort.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/params.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/atomic.cc:
    Remove memory parameter.

--HG--
extra : convert_revision : 43cb44a33b31320d44b69679dcf646c0380d07d3
2006-10-31 14:33:56 -05:00
Lisa Hsu
697b432ba8 FSConfig.py:
Accidentally committed this last time

configs/common/FSConfig.py:
    Accidentally committed this last time

--HG--
extra : convert_revision : 32d49c17c661b57a9aa9c3b057258f6e037ba745
2006-10-30 16:55:52 -05:00
Lisa Hsu
580c8421ab se.py, fs.py:
import Caches
Simulation.py:
Fix typo - L2Cache --> L1Cache

configs/common/Simulation.py:
    Fix typo - L2Cache --> L1Cache
configs/example/fs.py:
configs/example/se.py:
    import Caches

--HG--
extra : convert_revision : 4292225b322c069665262eab7c83b5341844fba0
2006-10-30 16:51:46 -05:00
Lisa Hsu
fe2698c435 ensure that there is a "/" between the cptdir and the cpt.%d.
--HG--
extra : convert_revision : 9aed7c3aecad10b039f3cfb26e04a7950be6bed1
2006-10-30 14:19:16 -05:00
Lisa Hsu
13cbd4e94b Merge zizzer:/bk/newmem
into  zed.eecs.umich.edu:/z/hsul/work/m5/newmem

--HG--
extra : convert_revision : 836fcb45f399ed4f860be2d0bfe2ac4709bfe2ef
2006-10-30 14:15:50 -05:00
Lisa Hsu
883f0394f5 decouple the switch option from the warmup period option - parsing was confused otherwise, oops.
--HG--
extra : convert_revision : 951fc664c59363df5f5e026aa791d83c26f050ec
2006-10-30 14:12:15 -05:00
Kevin Lim
bc93802fb8 Use some python os.path stuff to make it more flexible where we can execute this script from.
--HG--
extra : convert_revision : a76861a0f2669a7cd3bf3a34177739c69a913545
2006-10-30 14:01:34 -05:00
Lisa Hsu
b40af2328a add some comments and make the warmup period in a switchover parameterizable.
configs/common/Options.py:
    make the warmup period in a standard switch part of the option.
configs/common/Simulation.py:
    add some comments and also make the warmup period an option.

--HG--
extra : convert_revision : 0fa587291b97ff87c3b3a617e7359ac6d9bed7a5
2006-10-30 13:33:27 -05:00
Lisa Hsu
a6fd29ddf9 factor out common run code from se.py and fs.py.
configs/example/fs.py:
    factor out common code.
configs/example/se.py:
    factor out common code

--HG--
extra : convert_revision : 72a1f653c84eae1b7d281e0a5e60ee116ad6b27d
2006-10-27 16:32:26 -04:00
Ali Saidi
86bd01dfc9 Fix fs.py. Lisa did you test this? Is there some wierd python version thing?
--HG--
extra : convert_revision : 6df5f90d5b66e7af27d4f524744b9dc3c703a588
2006-10-24 13:10:31 -04:00
Lisa Hsu
3922b2e076 warmup of 1B cpu cycles.
configs/example/fs.py:
configs/example/se.py:
    warm up of 1B CPU cycles

--HG--
extra : convert_revision : 0f3263f466fde4cd86e0663930e83617a6b3faad
2006-10-23 19:32:57 -04:00
Lisa Hsu
764f27a0c9 Merge zizzer:/bk/newmem
into  zed.eecs.umich.edu:/z/hsul/work/m5/newmem

--HG--
extra : convert_revision : bb58679e101570d50c040519fb08ffbabfee7416
2006-10-23 18:46:05 -04:00
Lisa Hsu
049f8d53a9 make a lot of the same changes as to fs.py for checkpointing.
1) rearrange the options to be in a nice logical order
2) add an option for what i call "standard switch", which is from simple->timing->detailed
3) make checkpointing code such that checkpoints taken from the command line override checkpoint instructions compiled into binaries.
4) add an option for maximum number of checkpoints - simulation will stop at max or maxtick, whichever is first

--HG--
extra : convert_revision : 8d905e1b297ae664d60f8c8ba48b2aac25437fc6
2006-10-23 18:42:46 -04:00
Lisa Hsu
40a04f2f40 changes regarding fs.py
1) rearrange the options to be in a nice logical order
2) add an option for what i call "standard switch", which is from simple->timing->detailed
3) change the client/server naming system to testsys/drivesys
4) make checkpointing code such that checkpoints taken from the command line override checkpoint instructions compiled into binaries.
5) add an option for maximum number of checkpoints - simulation will stop at max or maxtick, whichever is first

doesn't fully work because of a caching issue, but the python side of things i think should work - the counterpart of se.py does work.
i think i should factor out a lot of the common code in both, but i'll do that after this checkin, just to get this in the tree.

configs/example/fs.py:
    1) rearrange the options to be in a nice logical order
    2) add an option for what i call "standard switch", which is from simple->timing->detailed
    3) change the client/server naming system to testsys/drivesys
    4) make checkpointing code such that checkpoints taken from the command line override checkpoint instructions compiled into binaries.
    5) add an option for maximum number of checkpoints - simulation will stop at max or maxtick, whichever is first

--HG--
extra : convert_revision : 078e22800ff83f6e950bf5cc6fb16a98320e7c51
2006-10-23 18:07:51 -04:00
Steve Reinhardt
d2856c2fde Add mutex test to Benchmarks.py.
--HG--
extra : convert_revision : 9b4f1ce9a181ac5a01e5b6a68067079969dfe9ce
2006-10-22 12:52:58 -04:00
Ron Dreslinski
30cd2298df Add some default options, point it to the /dist version of the splash benchmarks
--HG--
extra : convert_revision : cd3b4f395b360d646b8b60464768eaad0fd110a4
2006-10-20 21:13:10 -04:00
Ron Dreslinski
e198e58e1e Clean up splash2 so it works in v2.0
configs/splash2/run.py:
    Update the splash2 file

--HG--
extra : convert_revision : b57ef1ab4b8fd1eaf281358db623b7581b96546b
2006-10-20 19:53:52 -04:00
Ron Dreslinski
ad783962c5 Give physical memory some latency to stress the system
--HG--
extra : convert_revision : 3ca32ff9140770d0774cac5e82807a0574db09dd
2006-10-20 13:36:26 -04:00
Ron Dreslinski
316e0fa879 Add a config file in the example with the memtester and some parser options.
--HG--
extra : convert_revision : e70ccc3de4f7a3ae20ff9ec672853ee1555ed41b
2006-10-20 13:32:24 -04:00
Steve Reinhardt
bba3dfb0d3 First cut at LL/SC support in caches (atomic mode only).
configs/example/fs.py:
    Add MOESI protocol to caches (uni coherence not quite working w/FS yet).

--HG--
extra : convert_revision : 7bef7d9c5b24bf7241cc810df692408837b06b86
2006-10-19 00:33:33 -07:00
Steve Reinhardt
0128b73d05 Add --caches option to add caches to server CPUs.
--HG--
extra : convert_revision : 6aa97dcc807e175215e73c638faf73be926d4cd4
2006-10-17 23:30:11 -07:00
Steve Reinhardt
05c487ef3c Enable MP systems via cmd-line flag in fs.py.
configs/example/fs.py:
    Add flag for MP server systems.
src/python/m5/objects/AlphaConsole.py:
src/python/m5/objects/IntrControl.py:
    Change CPU from 'any' to 'cpu[0]' to work better with MP sytems.
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-timing-dual.py:
    Don't need to set console & intrcontrol cpu
    params anymore (default is fixed now).

--HG--
extra : convert_revision : 9417b12b1b395ff7d6a9f2894e4123923c754daf
2006-10-17 21:15:11 -07:00
Steve Reinhardt
96737c8a9b Rename 'Machine' to 'SysConfig'.
Clean up a little.

--HG--
extra : convert_revision : db5f36776209c76a593205c46b08aa147358f33a
2006-10-17 11:08:49 -07:00
Kevin Lim
e5b13138b1 Two minor fixes.
configs/common/SysPaths.py:
    Undo accidental change.
src/SConscript:
    Fix.

--HG--
extra : convert_revision : 665b186cff7d8ae560601ced7ae407a41a16cfea
2006-10-10 01:49:46 -04:00
Kevin Lim
bdde892d66 Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem

src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/cpu/simple/timing.hh:
tests/configs/o3-timing-mp.py:
    Hand merge.

--HG--
extra : convert_revision : a58cc439eb5e8f900d175ed8b5a85b6c8723e558
2006-10-09 22:59:56 -04:00
Lisa Hsu
67a114fc29 add in checkpoint restoration option, you can restore a checkpoint by giving a directory, and then giving a checkpoint number, the earliest checkpoint is 1, the latest is N. the default checkpoint directory is the cwd.
so you can restore by a command line like this:

m5.opt fs.py --checkpoint_dir="/my/ckpt/dir" -c 3

configs/example/fs.py:
    add in checkpoint restoration option, you can restore a checkpoint by giving a directory, and then giving a checkpoint number, the earliest checkpoint is 1, the latest is N.

--HG--
extra : convert_revision : bf9c8d3265a3875cdfb6a878005baa7ae29af90d
2006-10-09 00:12:16 -04:00
Steve Reinhardt
91c76278b9 Set cpu_id params (required by ll/sc code now).
--HG--
extra : convert_revision : e0f7ccbeccca191a8edb54494d2b4f9369e9914c
2006-10-08 19:11:06 -07:00
Kevin Lim
8949d813ff Clean up configs.
configs/common/FSConfig.py:
configs/common/SysPaths.py:
configs/example/fs.py:
configs/example/se.py:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
    Clean up configs by removing FullO3Config and instead using default values.
src/python/m5/objects/FUPool.py:
    Add in default FUPool.
src/python/m5/objects/O3CPU.py:
    Use defaults better.  Also set checker parameters, and fix up a config bug.

--HG--
extra : convert_revision : 5fd0c000143f4881f10a9a575c3810dc97cb290b
2006-10-08 01:12:42 -04:00
Lisa Hsu
54cf456fd1 add an option for defining a directory in which to place all your checkpoints. if none, default is cwd.
--HG--
extra : convert_revision : 23a602c2d800c922346c9743cc0c583d178a0ee7
2006-10-06 00:42:39 -04:00
Lisa Hsu
868d112578 fix the argument to m5.simulate() on a checkpoint.
src/sim/stat_control.cc:
    add curTick to reset stats printf.

--HG--
extra : convert_revision : da8cf5921e81b73f47d6831d539ca1fbdace3d1d
2006-10-05 13:18:32 -04:00
Kevin Lim
4ed184eade Merge ktlim@zamp:./local/clean/o3-merge/m5
into  zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem

configs/boot/micro_memlat.rcS:
configs/boot/micro_tlblat.rcS:
src/arch/alpha/ev5.cc:
src/arch/alpha/isa/decoder.isa:
src/arch/alpha/isa_traits.hh:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.hh:
src/cpu/checker/cpu_impl.hh:
src/cpu/o3/alpha/cpu_impl.hh:
src/cpu/o3/alpha/params.hh:
src/cpu/o3/checker_builder.cc:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/checker_builder.cc:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/base.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.hh:
src/dev/ide_disk.cc:
src/python/m5/objects/O3CPU.py:
src/python/m5/objects/Root.py:
src/python/m5/objects/System.py:
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
src/sim/system.hh:
util/m5/m5.c:
    Hand merge.

--HG--
rename : arch/alpha/ev5.cc => src/arch/alpha/ev5.cc
rename : arch/alpha/freebsd/system.cc => src/arch/alpha/freebsd/system.cc
rename : arch/alpha/isa/decoder.isa => src/arch/alpha/isa/decoder.isa
rename : arch/alpha/isa/mem.isa => src/arch/alpha/isa/mem.isa
rename : arch/alpha/isa_traits.hh => src/arch/alpha/isa_traits.hh
rename : arch/alpha/linux/system.cc => src/arch/alpha/linux/system.cc
rename : arch/alpha/system.cc => src/arch/alpha/system.cc
rename : arch/alpha/tru64/system.cc => src/arch/alpha/tru64/system.cc
rename : cpu/base.cc => src/cpu/base.cc
rename : cpu/base.hh => src/cpu/base.hh
rename : cpu/base_dyn_inst.hh => src/cpu/base_dyn_inst.hh
rename : cpu/checker/cpu.hh => src/cpu/checker/cpu.hh
rename : cpu/checker/cpu.cc => src/cpu/checker/cpu_impl.hh
rename : cpu/o3/alpha_cpu_builder.cc => src/cpu/o3/alpha/cpu_builder.cc
rename : cpu/checker/o3_cpu_builder.cc => src/cpu/o3/checker_builder.cc
rename : cpu/o3/commit_impl.hh => src/cpu/o3/commit_impl.hh
rename : cpu/o3/cpu.cc => src/cpu/o3/cpu.cc
rename : cpu/o3/fetch_impl.hh => src/cpu/o3/fetch_impl.hh
rename : cpu/o3/iew.hh => src/cpu/o3/iew.hh
rename : cpu/o3/iew_impl.hh => src/cpu/o3/iew_impl.hh
rename : cpu/o3/inst_queue.hh => src/cpu/o3/inst_queue.hh
rename : cpu/o3/inst_queue_impl.hh => src/cpu/o3/inst_queue_impl.hh
rename : cpu/o3/lsq_impl.hh => src/cpu/o3/lsq_impl.hh
rename : cpu/o3/lsq_unit.hh => src/cpu/o3/lsq_unit.hh
rename : cpu/o3/lsq_unit_impl.hh => src/cpu/o3/lsq_unit_impl.hh
rename : cpu/o3/mem_dep_unit_impl.hh => src/cpu/o3/mem_dep_unit_impl.hh
rename : cpu/o3/rename.hh => src/cpu/o3/rename.hh
rename : cpu/o3/rename_impl.hh => src/cpu/o3/rename_impl.hh
rename : cpu/o3/thread_state.hh => src/cpu/o3/thread_state.hh
rename : cpu/o3/tournament_pred.cc => src/cpu/o3/tournament_pred.cc
rename : cpu/o3/tournament_pred.hh => src/cpu/o3/tournament_pred.hh
rename : cpu/checker/cpu_builder.cc => src/cpu/ozone/checker_builder.cc
rename : cpu/ozone/cpu.hh => src/cpu/ozone/cpu.hh
rename : cpu/ozone/cpu_builder.cc => src/cpu/ozone/cpu_builder.cc
rename : cpu/ozone/cpu_impl.hh => src/cpu/ozone/cpu_impl.hh
rename : cpu/ozone/front_end.hh => src/cpu/ozone/front_end.hh
rename : cpu/ozone/front_end_impl.hh => src/cpu/ozone/front_end_impl.hh
rename : cpu/ozone/inorder_back_end_impl.hh => src/cpu/ozone/inorder_back_end_impl.hh
rename : cpu/ozone/inst_queue_impl.hh => src/cpu/ozone/inst_queue_impl.hh
rename : cpu/ozone/lw_back_end.hh => src/cpu/ozone/lw_back_end.hh
rename : cpu/ozone/lw_back_end_impl.hh => src/cpu/ozone/lw_back_end_impl.hh
rename : cpu/ozone/lw_lsq.hh => src/cpu/ozone/lw_lsq.hh
rename : cpu/ozone/lw_lsq_impl.hh => src/cpu/ozone/lw_lsq_impl.hh
rename : cpu/ozone/simple_params.hh => src/cpu/ozone/simple_params.hh
rename : cpu/ozone/thread_state.hh => src/cpu/ozone/thread_state.hh
rename : cpu/simple/cpu.cc => src/cpu/simple/base.cc
rename : cpu/cpu_exec_context.cc => src/cpu/simple_thread.cc
rename : cpu/thread_state.hh => src/cpu/thread_state.hh
rename : dev/ide_disk.hh => src/dev/ide_disk.hh
rename : python/m5/objects/BaseCPU.py => src/python/m5/objects/BaseCPU.py
rename : python/m5/objects/AlphaFullCPU.py => src/python/m5/objects/O3CPU.py
rename : python/m5/objects/OzoneCPU.py => src/python/m5/objects/OzoneCPU.py
rename : python/m5/objects/Root.py => src/python/m5/objects/Root.py
rename : python/m5/objects/System.py => src/python/m5/objects/System.py
rename : sim/eventq.hh => src/sim/eventq.hh
rename : sim/pseudo_inst.cc => src/sim/pseudo_inst.cc
rename : sim/pseudo_inst.hh => src/sim/pseudo_inst.hh
rename : sim/serialize.cc => src/sim/serialize.cc
rename : sim/stat_control.cc => src/sim/stat_control.cc
rename : sim/stat_control.hh => src/sim/stat_control.hh
rename : sim/system.hh => src/sim/system.hh
extra : convert_revision : 135d90e43f6cea89f9460ba4e23f4b0b85886e7d
2006-09-30 23:43:23 -04:00
Ali Saidi
44c6f953b0 Merge zizzer:/bk/newmem
into  zeep.pool:/z/saidi/work/m5.newmem.head

--HG--
extra : convert_revision : 14ac24236ff65b7e489c1ce4b4e9a295966013b8
2006-09-11 17:57:30 -04:00
Ali Saidi
46502851ab add annotation code to m5
configs/common/Benchmarks.py:
    add annotate test app
src/SConscript:
    add annotate.cc to lis
src/arch/alpha/isa/decoder.isa:
    add annotate instructions
src/base/traceflags.py:
    Add annotate trace flag
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
    add annotate pseudo ops
util/m5/m5op.S:
util/m5/m5op.h:
    add anotate ops

--HG--
extra : convert_revision : 7f965c0d84e41ce34f2ec8ec27a009276d67d8d6
2006-09-11 17:57:20 -04:00
Steve Reinhardt
545cbec5f7 Enable proxies (Self/Parent) for specifying ports.
Significant revamp of Port code.
Some cleanup of SimObject code too, particularly to
make the SimObject and MetaSimObject implementations of
__setattr__ more consistent.
Unproxy code split out of print_ini().

src/python/m5/multidict.py:
    Make get() return None by default, to match semantics
    of built-in dictionary objects.

--HG--
extra : convert_revision : db73b6cdd004a82a08b2402afd1e16544cb902a4
2006-09-05 22:04:34 -07:00
Steve Reinhardt
8bc3c2b192 Add FULL_SYSTEM check to example/fs.py.
--HG--
extra : convert_revision : 4cab46e73f29d2c9d24d9c0c847d598bf6d5c389
2006-08-29 14:36:35 -07:00
Steve Reinhardt
b0bf1e84e4 Add missing cpu mem param to example/se.py.
configs/example/se.py:
    Add missing cpu mem param.

--HG--
extra : convert_revision : 29a11b09524612f079b8998e99b8f5ee8c67c8a6
2006-08-29 14:14:29 -07:00
Kevin Lim
65741cd048 Updates to configs to support various sampling forms, truncated execution forms.
--HG--
extra : convert_revision : a6cf77f6c902e5f4f0a96206093d123eec2e0167
2006-08-24 18:01:07 -04:00
Steve Reinhardt
21b21c63b0 fs.py:
Add temporary cpu.mem parameter settings.

configs/example/fs.py:
    Add temporary cpu.mem parameter settings.

--HG--
extra : convert_revision : d7c2fcd8df8dc809b0511485877b2a85769aaf43
2006-08-21 12:31:59 -04:00
Steve Reinhardt
b83d0e5544 configs/example/fs.py:
Arg to m5.simulate() is a delta, not an absolute curTick value.
I didn't test this change, but I'm not convinced the previous
example was tested either, so I don't feel too badly about it.

configs/example/fs.py:
    Arg to m5.simulate() is a delta, not an absolute curTick value.
    I didn't test this change, but I'm not convinced the previous
    example was tested either, so I don't feel too badly about it.

--HG--
extra : convert_revision : ef7df7b83b3e2b5da02408c674169ccbed75a441
2006-08-20 19:28:58 -07:00
Lisa Hsu
a99534d429 Merge zizzer:/bk/newmem
into  zed.eecs.umich.edu:/z/hsul/work/m5/newmem

--HG--
extra : convert_revision : 382a9d4b420a9bdb35f93049306b7b7af0d33ad5
2006-08-17 00:02:38 -04:00
Lisa Hsu
a88a6758ce make tree rcS files reflect what we've been actually using in /dist.
also, update all the rcS files so that they are in sync with the new linux-dist build system.

configs/boot/devtime.rcS:
configs/boot/iscsi-client.rcS:
configs/boot/iscsi-server.rcS:
configs/boot/micro_memlat.rcS:
configs/boot/micro_stream.rcS:
configs/boot/micro_tlblat.rcS:
configs/boot/nat-netperf-maerts-client.rcS:
configs/boot/nat-netperf-server.rcS:
configs/boot/nat-netperf-stream-client.rcS:
configs/boot/nat-spec-surge-client.rcS:
configs/boot/nat-spec-surge-server.rcS:
configs/boot/natbox-netperf.rcS:
configs/boot/natbox-spec-surge.rcS:
configs/boot/netperf-rr.rcS:
configs/boot/netperf-server.rcS:
configs/boot/netperf-stream-client.rcS:
configs/boot/netperf-stream-nt-client.rcS:
configs/boot/nfs-client-nhfsstone.rcS:
configs/boot/nfs-client-tcp-smallb.rcS:
configs/boot/nfs-client-tcp.rcS:
configs/boot/nfs-client.rcS:
configs/boot/nfs-server-nhfsstone.rcS:
configs/boot/nfs-server.rcS:
configs/boot/ping-client.rcS:
configs/boot/ping-server.rcS:
configs/boot/spec-surge-client.rcS:
configs/boot/spec-surge-server.rcS:
configs/boot/surge-client.rcS:
configs/boot/surge-server.rcS:
    make tree rcS files reflect what we've been actually using in /dist.

--HG--
extra : convert_revision : 48fe4fe71938ef9d029e428028a271242c8d2faa
2006-08-17 00:00:27 -04:00
Ali Saidi
76ab1c466c add etherdump file option
--HG--
extra : convert_revision : 6b62398778208bc4e64582e06fb73b71a94f3014
2006-08-16 22:17:23 -04:00
Lisa Hsu
c475fd5211 Add in checkpointing in the frontend, so that when a checkpoint is called, the python handles it, and the simulation continues. Also, make it so that the cycle number is part of the cpt dir name, so that multiple checkpoints do not overwrite each other.
--HG--
extra : convert_revision : a55e4ac20da5a57ea8735951b9070960b9b8298f
2006-08-16 17:54:00 -04:00
Steve Reinhardt
bd4ccd6e39 Finish test clean-up & reorg.
configs/common/FSConfig.py:
    Add default Machine() param
configs/example/fs.py:
configs/example/se.py:
    make it work again
src/python/m5/objects/BaseCPU.py:
    Make mem PhysicalMemory so that a Parent.any proxy works well
src/sim/process.cc:
    Increase default stack size so we don't get an
    'increasing stack' message on 'hello world'
tests/SConscript:
    Add full list of current configs.
tests/configs/simple-atomic.py:
tests/configs/simple-timing.py:
    don't need SEConfig anymore
tests/quick/00.hello/test.py:
tests/quick/20.eio-short/test.py:
    fix
tests/run.py:
    move configs to separate dir

--HG--
rename : configs/test/fs.py => configs/example/fs.py
rename : configs/test/test.py => configs/example/se.py
rename : tests/simple-atomic.py => tests/configs/simple-atomic.py
rename : tests/simple-timing.py => tests/configs/simple-timing.py
rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini
rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out
rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console
rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt
rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr
rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout
rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini
rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out
rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console
rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt
rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr
rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout
rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini
rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out
rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console
rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt
rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr
rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout
rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello
rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello
extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16 14:42:44 -04:00
Steve Reinhardt
2552e68eb6 More restructuring of regression tests.
Moving work back to zizzer...

configs/common/FSConfig.py:
configs/test/fs.py:
    Move CPU connections out of makeLinuxAlphaSystem()
src/python/m5/objects/BaseCPU.py:
    Create default TLBs in full system.
    Move utility cache functions here.
src/python/m5/objects/O3CPU.py:
    Add _mem_ports
tests/run.py:
    Add binpath()
    Change maxtick default to 'forever'
tests/simple-atomic.py:
    Use connectmemPorts()
tests/simple-timing.py:
    Fix up.

--HG--
rename : tests/quick/eio1/ref/alpha/eio/detailed/config.ini => tests/quick/20.eio-short/ref/alpha/eio/detailed/config.ini
rename : tests/quick/eio1/ref/alpha/eio/detailed/config.out => tests/quick/20.eio-short/ref/alpha/eio/detailed/config.out
rename : tests/quick/eio1/ref/alpha/eio/detailed/m5stats.txt => tests/quick/20.eio-short/ref/alpha/eio/detailed/m5stats.txt
rename : tests/quick/eio1/ref/alpha/eio/detailed/stderr => tests/quick/20.eio-short/ref/alpha/eio/detailed/stderr
rename : tests/quick/eio1/ref/alpha/eio/detailed/stdout => tests/quick/20.eio-short/ref/alpha/eio/detailed/stdout
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/config.ini => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/config.ini
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/config.out => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/config.out
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/m5stats.txt => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/m5stats.txt
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/stderr => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/stderr
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/stdout => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/stdout
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/config.ini => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/config.ini
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/config.out => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/config.out
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/m5stats.txt => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/m5stats.txt
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/stderr => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/stderr
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/stdout => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/stdout
rename : tests/quick/eio1/test.py => tests/quick/20.eio-short/test.py
rename : configs/test/hello => tests/test-progs/hello/bin/alpha/linux/hello
rename : configs/test/hello_mips => tests/test-progs/hello/bin/mips/linux/hello_mips
rename : configs/test/sparc_tests/hello_sparc => tests/test-progs/hello/bin/sparc/bin
extra : convert_revision : 1f891392ecc11ffcc3b3182fa673c401c0efc8a5
2006-08-16 09:52:05 -07:00
Ali Saidi
de29f555c4 implement benchmark selection code
--HG--
extra : convert_revision : 84632fdad7019e177e61c56ae30ea2f3fdbc0995
2006-08-15 19:12:19 -04:00
Kevin Lim
de321175f2 Add in a bunch more stuff.
configs/boot/micro_memlat.rcS:
    Update these scripts so they work (not sure why they broke)
configs/boot/micro_tlblat.rcS:
    Update this script to use a different test.

--HG--
extra : convert_revision : 6e8692540a9fac6ae8f2d9975c70d4135354b849
2006-08-11 17:48:41 -04:00
Kevin Lim
08c0919b43 Clean up some more config stuff.
configs/common/FSConfig.py:
    Clean up some code to make functions look less like classes.  Also put makeList function (formerly listWrapper) into m5 itself.
configs/test/fs.py:
    Update for changed code.
src/python/m5/__init__.py:
    Put makeList into m5.

--HG--
extra : convert_revision : 731806a7486f9abf986f52926126df666b024b1d
2006-07-27 17:49:00 -04:00
Kevin Lim
f9729e999f Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge

--HG--
extra : convert_revision : 45650c90385b4e13e79ccf271a30bb55552b380f
2006-07-23 00:10:52 -04:00
Kevin Lim
6ef6e9b14d Fix up test.py
configs/test/test.py:
    Fix up this config.

--HG--
extra : convert_revision : e15071ee27b860cc3ad79277aa61f3e6bb7405d3
2006-07-23 00:10:11 -04:00
Gabe Black
c77cb31473 Reorganized SPARC binaries
--HG--
rename : configs/test/hello_sparc => configs/test/sparc_tests/hello_sparc
extra : convert_revision : d8f36fc9b346f0e89dc8406403576e88bb2dc139
2006-07-22 17:30:50 -04:00
Kevin Lim
7ccdb7accc Last minute check in. Very few functional changes other than some minor config updates. Also include some recently generated stats.
SConstruct:
    Make test CPUs option non-sticky.
configs/common/FSConfig.py:
    Be sure to set the memory mode.
configs/test/fs.py:
    Wrong string.
tests/SConscript:
    Only test valid CPUs that have been compiled in.
tests/test1/ref/alpha/atomic/config.ini:
tests/test1/ref/alpha/atomic/config.out:
tests/test1/ref/alpha/atomic/m5stats.txt:
tests/test1/ref/alpha/atomic/stdout:
tests/test1/ref/alpha/detailed/config.ini:
tests/test1/ref/alpha/detailed/config.out:
tests/test1/ref/alpha/detailed/m5stats.txt:
tests/test1/ref/alpha/detailed/stdout:
tests/test1/ref/alpha/timing/config.ini:
tests/test1/ref/alpha/timing/config.out:
tests/test1/ref/alpha/timing/m5stats.txt:
tests/test1/ref/alpha/timing/stdout:
    Update output.

--HG--
extra : convert_revision : 6eee2a5eae0291b5121b41bcd7021179cdd520a3
2006-07-22 15:50:39 -04:00
Kevin Lim
db5f710a7b Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge

configs/test/fs.py:
    Hand merge.

--HG--
extra : convert_revision : 78f7c46084f66d52ddfe0386fd7c08de8017331e
2006-07-21 16:08:17 -04:00
Kevin Lim
a6c2e5cca0 Rearrange the FS configs to be more shared. Also check in the full-system tests. Reference stats coming soon.
configs/test/fs.py:
    Pull out a lot of common code and put it into configs/common/FSConfig.py.

--HG--
extra : convert_revision : 175b18d75f82ddecbcc9a6418fe40df314db55d5
2006-07-21 15:56:35 -04:00
Kevin Lim
bd33d8d4ac Some reorganization. Options are all handled at the user level script. Move createCpus function (now called connectCpu) to Util.py, where it can be used by other configs.
--HG--
rename : configs/test/SysPaths.py => configs/common/SysPaths.py
extra : convert_revision : 2b1b95c5f29e7ade08b1abd6f24c129d600fe2e8
2006-07-21 15:42:44 -04:00
Ali Saidi
e8a3295075 Enforce the timing cpu ticking at it's clock rate
Add a max time option in seconds and a single system root clock be 1THz

configs/test/fs.py:
    Add a max time option in seconds and a single system root clock be 1THz
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
    Enforce the timing cpu ticking at it's clock rate

--HG--
extra : convert_revision : a1b0de27abde867f9c3da5bec11639e3d82a95f5
2006-07-20 19:00:40 -04:00
Kevin Lim
1fdf14dd5a Update configs.
configs/test/test.py:
    Update for changes to SEConfig.

--HG--
extra : convert_revision : a089a7db4035889db01d543d9a18ea6526f832ca
2006-07-19 15:24:22 -04:00
Kevin Lim
31ac8e7337 Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge

configs/test/fs.py:
configs/test/test.py:
    SCCS merged

--HG--
extra : convert_revision : 7b2dbcd5881fac01dec38001c4131e73b5be52b5
2006-07-14 17:54:43 -04:00
Ali Saidi
c368ff0bd8 add system.mem_mode = ['timing', 'atomic']
update scripts acordingly

configs/test/SysPaths.py:
    new syspaths from nate, this one allows you to set script, binary, and disk paths like
    system.dir = 'aouaou' in your script
configs/test/fs.py:
    update for system mem_mode
    Put small checkpoint example
    Make clock 1THz
configs/test/test.py:
src/arch/alpha/freebsd/system.cc:
src/arch/alpha/linux/system.cc:
src/arch/alpha/system.cc:
src/arch/alpha/tru64/system.cc:
src/arch/sparc/system.cc:
src/python/m5/objects/System.py:
src/sim/system.cc:
src/sim/system.hh:
    update for system mem_mode
src/dev/io_device.cc:
    Use time returned from sendAtomic to delay

--HG--
extra : convert_revision : 67eedb3c84ab2584613faf88a534e793926fc92f
2006-07-13 15:48:17 -04:00
Kevin Lim
6dfaf06edf Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge

configs/test/test.py:
    Hand merge.

--HG--
extra : convert_revision : e3fce9cf50a65a9400cd3ec887b13e4765274ec2
2006-07-12 17:21:25 -04:00
Kevin Lim
a9ca36639f Initial try of consolidating configuration files so they can be shared more easily, especially across regression tests and simple examples.
configs/test/fs.py:
    Pull a lot of the default options out of the config file now that they are in the Python objects themselves.  Also merge this file with the single_fs.py, allowing one file to be used for both.  Previously they differed only by the system they instantiated.
configs/test/test.py:
    Initial stab at consolidating configuration files so they aren't redundant between the regression tests and the simple examples.

--HG--
extra : convert_revision : e8ae3de5a6d8864831f21089d4fdb8ec690e4731
2006-07-12 17:17:17 -04:00
Nathan Binkert
55ea050d48 Migrate most of main() and and all option parsing to python
configs/test/fs.py:
configs/test/test.py:
    update for the new way that m5 deals with options
src/python/SConscript:
    Compile AUTHORS, LICENSE, README, and RELEASE_NOTES into the
    python stuff.
src/python/m5/__init__.py:
    redo the way options work.
    Move them all to main.py
src/sim/main.cc:
    Migrate more functionality for main() into python.
    Namely option parsing
src/python/m5/attrdict.py:
    A dictionary object that overrides attribute access to
    do item access.
src/python/m5/main.py:
    The new location for M5's option parsing, and the main()
    routine to set up the simulation.

--HG--
extra : convert_revision : c86b87a9f508bde1994088e23fd470c7753ee4c1
2006-07-10 23:00:13 -04:00
Ron Dreslinski
aef232a942 Update FS configs to use cpu connectors for ports
--HG--
extra : convert_revision : 1e2e503401f92c1f30e2e487d7aeed1c7c5b7ee4
2006-07-10 12:07:21 -04:00
Ron Dreslinski
ea11c7bdbe Update cpus to use the getPort function to use a connector object to connect the I/D cache ports to memory
configs/test/test.py:
    Update to use new cpu getPort functionality
src/cpu/base.cc:
    Make cpu's a memObject to expose getPort interface
src/cpu/base.hh:
    Make cpu's a memObject to export getPort interface
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
    Now use the connector via getPort interface
src/mem/cache/base_cache.cc:
    Make sure the cache recognizes all port names

--HG--
extra : convert_revision : dbfefa978ec755bc8aa6f962ae158acf32dafe61
2006-07-07 15:15:11 -04:00
Ali Saidi
93839380e7 Add default responder to bus
Update configuration for new default responder on bus
Update to devices to handle their own pci config space without pciconfigall
Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for
Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same
bus:dev:func and interrupt
Remove pciconfigspace from pci devices, and py files
Add calcConfigAddr that returns address for config space based on bus/dev/function + offset

configs/test/fs.py:
    Update configuration for new default responder on bus
src/dev/ide_ctrl.cc:
src/dev/ide_ctrl.hh:
src/dev/ns_gige.cc:
src/dev/ns_gige.hh:
src/dev/pcidev.cc:
src/dev/pcidev.hh:
    Update to handle it's own pci config space without pciconfigall
src/dev/io_device.cc:
src/dev/io_device.hh:
    change naming for pio port
    break out recvTiming into two functions to reuse code
src/dev/pciconfigall.cc:
src/dev/pciconfigall.hh:
    removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for
src/dev/pcireg.h:
    add a max size for PCI config space (per PCI spec)
src/dev/platform.cc:
src/dev/platform.hh:
    remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same
    bus:dev:func and interrupt
src/dev/sinic.cc:
    remove pciconfigspace as it's no longer a needed parameter
src/dev/tsunami.cc:
src/dev/tsunami.hh:
src/dev/tsunami_pchip.cc:
src/dev/tsunami_pchip.hh:
    add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec)
src/mem/bus.cc:
src/mem/bus.hh:
src/python/m5/objects/Bus.py:
    add idea of default responder to bus
src/python/m5/objects/Pci.py:
    add config port for pci devices
    add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec)

--HG--
extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 14:41:01 -04:00
Korey Sewell
19083bc4ce Added hook to check for SMT workloads. SMT is identified by adding a semicolon between
the workloads.

Now SMT on the O3CPU can be invoked by "/ALPHA_SE/m5.debug ../configs/test/test.py -d --cmd="hello;hello" -i="file1;file2"

I think I am a novice python magician now!!!!....

configs/test/test.py:
    Added hook to check for SMT workloads. SMT is identified by adding a semicolon between
    the workloads.

    Now SMT on the O3CPU can be invoked by "/ALPHA_SE/m5.debug ../configs/test/test.py -d --cmd="hello;hello" --input="file1;file2"
    (btw, We are back to working for this double hello world case)

    I am a novice python magician now!!!!....

--HG--
extra : convert_revision : b55e10dce33f5a9dc4c78f90409ec0912bad4292
2006-07-03 01:10:19 -04:00
Ali Saidi
88c9b17cb9 Add help strings for options
--HG--
extra : convert_revision : ebbafaf00c56a4d2ee65eea08a12d276f279135d
2006-06-27 14:58:46 -04:00
Ali Saidi
a23f15641e Merge zizzer:/bk/newmem
into  zeep.eecs.umich.edu:/z/saidi/work/m5.newmem

--HG--
extra : convert_revision : 39c99c8acadd43f3ec42ae7550289a5075d910e4
2006-06-26 17:50:58 -04:00
Ali Saidi
d80acd37bd add python options for input file and command line options for live process
--HG--
extra : convert_revision : 3db1e6d29846812378aa5174179a0686f0141580
2006-06-26 16:50:19 -04:00