Commit graph

235 commits

Author SHA1 Message Date
Andreas Hansson
55cf3f4ac1 MEM: Removing the default port peer from Python ports
In preparation for the introduction of Master and Slave ports, this
patch removes the default port parameter in the Python port and thus
forces the argument list of the Port to contain only the
description. The drawback at this point is that the config port and
dma port of PCI and DMA devices have to be connected explicitly. This
is key for future diversification as the pio and config port are
slaves, but the dma port is a master.
2012-01-17 12:55:09 -06:00
Andreas Hansson
2208ea049f MEM: Make the bus bridge unidirectional and fixed address range
This patch makes the bus bridge uni-directional and specialises the
bus ports to be a master port and a slave port. This greatly
simplifies the assumptions on both sides as either port only has to
deal with requests or responses. The following patches introduce the
notion of master and slave ports, and would not be possible without
this split of responsibilities.

In making the bridge unidirectional, the address range mechanism of
the bridge is also changed. For the cases where communication is
taking place both ways, an additional bridge is needed. This causes
issues with the existing mechanism, as the busses cannot determine
when to stop iterating the address updates from the two bridges. To
avoid this issue, and also greatly simplify the specification, the
bridge now has a fixed set of address ranges, specified at creation
time.
2012-01-17 12:55:09 -06:00
Andreas Hansson
f85286b3de MEM: Add port proxies instead of non-structural ports
Port proxies are used to replace non-structural ports, and thus enable
all ports in the system to correspond to a structural entity. This has
the advantage of accessing memory through the normal memory subsystem
and thus allowing any constellation of distributed memories, address
maps, etc. Most accesses are done through the "system port" that is
used for loading binaries, debugging etc. For the entities that belong
to the CPU, e.g. threads and thread contexts, they wrap the CPU data
port in a port proxy.

The following replacements are made:
FunctionalPort      > PortProxy
TranslatingPort     > SETranslatingPortProxy
VirtualPort         > FSTranslatingPortProxy

--HG--
rename : src/mem/vport.cc => src/mem/fs_translating_port_proxy.cc
rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh
rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc
rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-17 12:55:08 -06:00
Nilay Vaish
03229f2575 Config: Add support for restoring using a timing CPU
Currently there is an assumption that restoration from a checkpoint will
happen by first restoring to an atomic CPU and then switching to a timing
CPU. This patch adds support for directly restoring to a timing CPU. It
adds a new option '--restore-with-cpu' which is used to specify the type
of CPU to which the checkpoint should be restored to. It defaults to
'atomic' which was the case before.
2012-01-11 13:50:18 -06:00
Nilay Vaish
e4b447754e Config: Remove short option string for cpu type 2012-01-10 06:35:40 -06:00
Ali Saidi
bcb71963eb ARM: Add support for running multiple systems 2012-01-09 18:08:20 -06:00
Ali Saidi
80a6907927 ARM: Add support for initparam m5 op 2012-01-09 18:08:20 -06:00
Ali Saidi
6a6d888ab4 cpu2000: Add missing art benchmark to all 2012-01-09 18:08:20 -06:00
Nilay Vaish
a88ec980a4 Config: Add an option of type 'choice' for cpu type
This patch adds a new option for cpu type. This option is of type 'choice'
which is similar to a C++ enum, except that it takes string values as
possible choices. Following options are being removed -- detailed, timing,
inorder.

--HG--
extra : rebase_source : 58885e2e8a88b6af8e6ff884a5922059dbb1a6cb
2012-01-05 11:04:25 -06:00
Anthony Gutierrez
19e65a6502 ARM: Update config files for Android/BBench images available on website.
--HG--
extra : rebase_source : ca98021c3f96422374fbd4500da312a5a9dd00df
2011-12-15 00:43:35 -05:00
Chander Sudanthi
61c14da751 O3: Remove hardcoded tgts_per_mshr in O3CPU.py.
There are two lines in O3CPU.py that set the dcache and icache
tgts_per_mshr to 20, ignoring any pre-configured value of tgts_per_mshr.
This patch removes these hardcoded lines from O3CPU.py and sets the default
L1 cache mshr targets to 20.

--HG--
extra : rebase_source : 6f92d950e90496a3102967442814e97dc84db08b
2011-12-01 00:15:22 -08:00
Ali Saidi
f2bfef90c4 ARM: Fix small bug in config script that prevents android from booting 2011-10-19 18:08:31 -05:00
Ali Saidi
ba265abbfd ARM: Add some MP regressions and clean up the disk images and kernels a bit 2011-08-19 15:08:09 -05:00
Ali Saidi
2fd2b44b86 ARM: Add VExpress_E support with PCIe to gem5 2011-08-19 15:08:08 -05:00
Ali Saidi
d2a0a2ec22 ARM: Add support for Versatile Express boards 2011-08-19 15:08:08 -05:00
Steve Reinhardt
19bb896bfe config: revamp x86 config to avoid appending to SimObjectVectors
A significant contributor to the need for adoptOrphanParams()
is the practice of appending to SimObjectVectors which have
already been assigned as children.  This practice sidesteps the
assignment operation for those appended SimObjects, which is
where parent/child relationships are typically established.

This patch reworks the config scripts that use append() on
SimObjectVectors, which all happen to be in the x86 system
configuration.  At some point in the future, I hope to make
SimObjectVectors immutable (by deriving from tuple rather than
list), at which time this patch will be necessary for correct
operation.  For now, it just avoids some of the warning
messages that get printed in adoptOrphanParams().
2011-05-23 14:29:23 -07:00
Korey Sewell
b3ff137c8e configs: missed spot progress-interval change 2011-05-23 14:36:22 -04:00
Korey Sewell
9f1b60e05c configs: cleanup redundant/unused options
maxinsts & max_inst redundant
prog_intvl and profile seem redundant, but profile looks to be unused
add -p option for progress intervals
2011-05-20 14:49:06 -04:00
Ali Saidi
cefd6960e5 ARM: Configure bootloader parameters 2011-05-04 20:38:28 -05:00
Nathan Binkert
09064ea552 python: fix another bug from changes to main.py 2011-04-20 19:07:44 -07:00
Ali Saidi
d6289507d8 ARM: Include IDE/CF controller by default in PBX model.
Frame buffer and boot linux:
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxFrameBuf --kernel=vmlinux.touchkit
Linux from a CF card:
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxCflash --kernel=vmlinux.touchkit
Run Android
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmAndroid --kernel=vmlinux.android
Run MP
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxCflash --kernel=vmlinux.mp-2.6.38
2011-04-04 11:42:31 -05:00
Anthony Gutierrez
332adcdd1a Sim: Fix Simulation.py to allow more than 1 core for standard switching.
This patch moves the assignment of testsys.switch_cpus, testsys.switch_cpus_1,
switch_cpu_list, and switch_cpu_list1 outside of the for loop so they are
assigned only once, after switch_cpus and switch_cpus_1 are constructed.
2011-04-04 11:42:31 -05:00
Ali Saidi
887e9e2b99 ARM: Bare metal system should have 256MB of RAM. 2011-03-17 19:20:20 -05:00
Ali Saidi
a432d8e085 Mem: Fix issue with dirty block being lost when entire block transferred to non-cache.
This change fixes the problem for all the cases we actively use. If you want to try
more creative I/O device attachments (E.g. sharing an L2), this won't work. You
would need another level of caching between the I/O device and the cache
(which you actually need anyway with our current code to make sure writes
propagate). This is required so that you can mark the cache in between as
top level and it won't try to send ownership of a block to the I/O device.
Asserts have been added that should catch any issues.
2011-03-17 19:20:19 -05:00
Gabe Black
aa0cd52504 Configs: Explicitly import env in Benchmarks.py
env was being implicitly imported into Benchmarks.py through SysPaths.py.
This change brings it in explicitly in the file where it's used.
2011-02-24 02:14:45 -08:00
Ali Saidi
79dac89552 ARM: Clarifies creation of Linux and baremetal ARM systems.
makeArmSystem creates both bare-metal and Linux systems more cleanly.
machine_type was never optional though listed as an optional argument; a system
such as "RealView_PBX" must now be explicitly specified.  Now that it is a
required argument, the placement of the arguments has changed slightly
requiring some changes to calls that create ARM systems.
2011-02-23 15:10:48 -06:00
Korey Sewell
981e1dd7ee configs: cache: add cache line size option 2011-02-23 14:26:55 -05:00
Korey Sewell
fb92578415 configs: set default cache params
It's confusing (especially to new users), when you are setting some standard
parameters (as defined in Options.py) and they aren't reflected in the simulations
so we might as well link the settings in CacheConfig.py to those in Options.py
2011-02-23 01:01:46 -05:00
Ali Saidi
d33c1d9592 VNC: Add VNC server to M5 2011-02-11 18:29:35 -06:00
Brad Beckmann
6ebd7c390b config: fixed minor bug connecting dma devices to ruby 2011-02-08 15:52:44 -08:00
Gabe Black
f8fc0419c5 X86, Config: Move the setting of work count options to a separate function.
This way things that don't care about work count options and/or aren't called
by something that has those command line options set up doesn't have to build
a fake object to carry in inert values.
2011-02-07 01:22:15 -08:00
Brad Beckmann
dfa8cbeb06 m5: added work completed monitoring support 2011-02-06 22:14:19 -08:00
Brad Beckmann
17b4ef52bb ruby: x86 fs config support 2011-02-06 22:14:18 -08:00
Gabe Black
00f24ae92c Config: Keep track of uncached and cached ports separately.
This makes sure that the address ranges requested for caches and uncached ports
don't conflict with each other, and that accesses which are always uncached
(message signaled interrupts for instance) don't waste time passing through
caches.
2011-02-03 20:23:00 -08:00
Gabe Black
c4b81d311e X86: Change how the default disk image gets set up.
The disk image to use was always being forced to a particular value. This
change changes what disk image is selected as the default based on the
architecture being built. In the future, a more sophisticated system might be
used that selected a path based on certain rules instead of relying on one off
file names.
2011-02-02 18:03:58 -08:00
Gabe Black
119f5f8e94 X86: Add L1 caches for the TLB walkers.
Small L1 caches are connected to the TLB walkers when caches are used. This
allows them to participate in the coherence protocol properly.
2011-02-01 18:28:41 -08:00
Gabe Black
4876e0c92b Config: Change misleading "cycle" message to say "tick".
Most of the messages in the config scripts that report a time value already
print "@ tick" followed by the current tick value, but a few were printing
"@ cycle". Since this is a distinction that's frequently confusing to new
users, this changes those message to the more accurate and consistent "@ tick".
2010-11-17 23:16:19 -05:00
Ali Saidi
d7b8efa0df ARM: Add support for a dumb IDE controller 2010-11-15 14:04:03 -06:00
Ali Saidi
c779af4e12 Mem: Finish half-baked support for mmaping file in physmem.
Physmem has a parameter to be able to mem map a file, however
it isn't actually used. This changeset utilizes the parameter
so a file can be mmapped.
2010-11-08 13:58:24 -06:00
Brad Beckmann
8572d8fd91 config: fixed ruby dma device connections 2010-08-24 13:20:31 -07:00
Ali Saidi
330fada1aa ARM: Add configuration for Linux/Full System 2010-08-23 11:18:40 -05:00
Brad Beckmann
29c45ccd23 ruby: Reduced ruby latencies
The previous slower ruby latencies created a mismatch between the faster M5
cpu models and the much slower ruby memory system.  Specifically smp
interrupts were much slower and infrequent, as well as cpus moving in and out
of spin locks.  The result was many cpus were idle for large periods of time.

These changes fix the latency mismatch.
2010-08-20 11:46:12 -07:00
Brad Beckmann
5c801090a3 config: reorganized how ruby specifies command-line options 2010-08-20 11:44:09 -07:00
Steve Reinhardt
e0754c0f6c misc: add some AMD copyright notices
Meant to add these with the previous batch of csets.
2010-08-17 05:49:05 -07:00
Steve Reinhardt
2519d116c9 sim: fold checkpoint restore code into instantiate()
The separate restoreCheckpoint() call is gone; just pass
the checkpoint dir as an optional arg to instantiate().
This change is a precursor to some more extensive
reworking of the startup code.
2010-08-17 05:17:06 -07:00
Steve Reinhardt
cfaddd5fd3 configs: clean up checkpoint code in Simulation.py
Small change to clean up some redundant code.
Should not have any functional impact.
2010-08-17 05:17:06 -07:00
Steve Reinhardt
1fbe466345 sim: make Python Root object a singleton
Enforce that the Python Root SimObject is instantiated only
once.  The C++ Root object already panics if more than one is
created.  This change avoids the need to track what the root
object is, since it's available from Root.getInstance() (if it
exists).  It's now redundant to have the user pass the root
object to functions like instantiate(), checkpoint(), and
restoreCheckpoint(), so that arg is gone.  Users who use
configs/common/Simulate.py should not notice.
2010-08-17 05:06:22 -07:00
Nathan Binkert
2e9e75447a None, not none 2010-08-08 22:57:16 -07:00
Steve Reinhardt
cbd65e95db util: add a script for testing checkpointing
See comments in util/checkpoint-tester.py for details.
2010-07-05 21:39:38 -07:00
Ali Saidi
3dc6a8070e ARM: fix sizes of structs for ARM Linux 2010-06-02 12:58:17 -05:00
Nathan Binkert
90820ddf02 config: fix assertion for x86 in FSConfig.py 2010-04-18 21:33:59 -07:00
Brad Beckmann
898f1fc4a4 ruby: Reorganized Ruby topology and protocol files
--HG--
rename : configs/ruby/MESI_CMP_directory.py => configs/ruby/protocols/MESI_CMP_directory.py
rename : configs/ruby/MI_example.py => configs/ruby/protocols/MI_example.py
rename : configs/ruby/MOESI_CMP_directory.py => configs/ruby/protocols/MOESI_CMP_directory.py
rename : configs/ruby/MOESI_CMP_token.py => configs/ruby/protocols/MOESI_CMP_token.py
rename : configs/ruby/MOESI_hammer.py => configs/ruby/protocols/MOESI_hammer.py
rename : configs/ruby/networks/MeshDirCorners.py => src/mem/ruby/network/topologies/MeshDirCorners.py
2010-03-21 21:22:22 -07:00
Brad Beckmann
4f044605e8 ruby: Adds configurable bit selection for numa mapping 2010-03-21 21:22:21 -07:00
Brad Beckmann
92cfd1cac7 ruby: Ruby support for sparse memory
The patch includes direct support for the MI example protocol.
2010-03-21 21:22:21 -07:00
Brad Beckmann
d8e1e5abd0 ruby: fixed how ruby_fs creates phsyical memory
Now ruby_fs creates physical memory of the right size.
2010-03-21 21:22:20 -07:00
Lisa Hsu
a70f70ccbf configs: pull out cache configuration code from se.py and fs.py.
Most of these frontend configurations share cache configuration code, pull it out so that
changes to caches don't have to require changing multiple config files.
2010-02-25 10:13:40 -08:00
Brad Beckmann
8dd45674ae ruby: Converted Garnet to M5 configuration 2010-01-29 20:29:32 -08:00
Brad Beckmann
6c867f8263 ruby: Added a mesh topology 2010-01-29 20:29:27 -08:00
Brad Beckmann
d77a9df3c1 ruby: MOESI_CMP_token updates to use the new config system 2010-01-29 20:29:25 -08:00
Brad Beckmann
ce2d13195b ruby: FS support using the new configuration system 2010-01-29 20:29:21 -08:00
Brad Beckmann
dc758641c9 ruby: reorganized ruby python configuration
Reorganized ruby python configuration so that protocol and ruby memory system
configuration code can be shared by multiple front-end configuration files
(i.e. memory tester, full system, and hopefully the regression tester).  This
code works for memory tester, but have not tested fs mode.
2010-01-29 20:29:20 -08:00
Gabe Black
93d89b288f X86: Record the memory mode when building an X86 system. 2009-12-19 01:49:34 -08:00
Brad Beckmann
70a261c0ae m5: Added option to take a checkpoint at the end of simulation 2009-11-18 13:55:58 -08:00
Brad Beckmann
b8c413e993 m5: Moved profile option since Simulation depends on it. 2009-11-18 13:55:58 -08:00
Brad Beckmann
3cf24f9716 ruby: Support for merging ALPHA_FS and ruby
Connects M5 cpu and dma ports directly to ruby sequencers and dma
sequencers.  Rubymem also includes a pio port so that pio requests
and be forwarded to a special pio bus connecting to device pio
ports.
2009-11-18 13:55:58 -08:00
Nathan Binkert
9a8cb7db7e python: Move more code into m5.util allow SCons to use that code.
Get rid of misc.py and just stick misc things in __init__.py
Move utility functions out of SCons files and into m5.util
Move utility type stuff from m5/__init__.py to m5/util/__init__.py
Remove buildEnv from m5 and allow access only from m5.defines
Rename AddToPath to addToPath while we're moving it to m5.util
Rename read_command to readCommand while we're moving it
Rename compare_versions to compareVersions while we're moving it.

--HG--
rename : src/python/m5/convert.py => src/python/m5/util/convert.py
rename : src/python/m5/smartdict.py => src/python/m5/util/smartdict.py
2009-09-22 15:24:16 -07:00
Korey Sewell
7858a8e68f configs: add maxinsts option on command line
-option to allow threads to run to a max_inst_any_thread which is more useful/quicker in a lot of
cases then always having to figure out what tick to run your simulation to.
2009-09-16 09:45:30 -04:00
Korey Sewell
9f90291c54 cpus: fix cpu progress event
this was double scheduling itself (once in constructor and once in cpu code). also add support for stopping / starting
progress events through repeatEvent flag and also changing the interval of the progress event as well
2009-05-05 02:39:05 -04:00
Gabe Black
8d84f81e70 X86, Config: Make makeX86System consider the number of CPUs, and clean up interrupt assignment. 2009-04-26 02:04:32 -07:00
Steve Reinhardt
6629d9b2bc mem: use single BadAddr responder per system.
Previously there was one per bus, which caused some coherence problems
when more than one decided to respond.  Now there is just one on
the main memory bus.  The default bus responder on all other buses
is now the downstream cache's cpu_side port.  Caches no longer need
to do address range filtering; instead, we just have a simple flag
to prevent snoops from propagating to the I/O bus.
2008-07-16 11:10:33 -07:00
Steve Reinhardt
97b6947eb7 Minor tweaks for future Ruby compatibility. 2009-04-21 08:17:36 -07:00
Gabe Black
b8333a5155 X86: Actually put the PCI INTA entry into the MP tables. 2009-04-19 04:15:18 -07:00
Gabe Black
25e223c30f X86: Make E820 report nice, round (and correct) numbers. 2009-04-19 04:14:48 -07:00
Gabe Black
06d25dcd26 X86: Automatically make the IO APIC in an N CPU system have id N+1. 2009-04-19 02:39:19 -07:00
Steve Reinhardt
9b66e82897 configs: Allow M5_CPU2000 env var to set CPU2K binary path.
It would be nice to have a more comprehensive mechanism
but this is a big improvement over manually editing the script.
2009-04-15 12:52:31 -07:00
Gabe Black
eafdf00eb3 X86: Add IRQ4 to the Intel MP tables. 2009-02-25 10:19:06 -08:00
Korey Sewell
cf4a00ca41 Configs: Add support for the InOrder CPU model 2009-02-10 15:49:29 -08:00
Gabe Black
1c5b9773bd X86: Find the natural lpj for this configuration. 2009-02-01 00:29:07 -08:00
Gabe Black
a5ed1590bd X86: Add a root device to the kernel command line. 2009-02-01 00:27:49 -08:00
Gabe Black
70cd5bfce5 X86: Configure the first PCI interrupt. 2009-02-01 00:26:10 -08:00
Gabe Black
18f6c18323 X86: Hook in a hard drive image. 2009-02-01 00:24:26 -08:00
Gabe Black
01679bb416 X86: Take out the IDE noprobe kernel arguments. 2009-02-01 00:20:44 -08:00
Gabe Black
bb7ad80bbe X86: Plug in an IDE controller. 2009-02-01 00:00:03 -08:00
Gabe Black
d08b8e2b82 X86: Add some interrupt info to the intel MP tables. 2009-01-31 23:43:09 -08:00
Ali Saidi
f4291aac25 Errors: Print a URL with a hash of the format string to find more information about an error. 2009-01-30 20:04:15 -05:00
Gabe Black
7b7a92d3f4 X86: Prevent Linux for probing for non-existant IDE controllers. 2009-01-25 20:36:24 -08:00
Gabe Black
ff29e00112 X86: Add entries for the IO APIC to the MP table. 2008-10-11 16:12:34 -07:00
Gabe Black
526933e5d0 X86: Add an Intel MP table to the simulation. 2008-10-11 15:14:37 -07:00
Gabe Black
3af428606a X86: Rename the PC device to Pc.
--HG--
rename : src/dev/x86/PC.py => src/dev/x86/Pc.py
2008-10-11 02:23:40 -07:00
Gabe Black
ec0fb05d64 X86: Turn SMBios structures into simobjects. 2008-10-10 03:50:51 -07:00
Gabe Black
b4dab225fd X86: Split makeLinuxX86System into makeLinuxX86System and makeX86System. 2008-10-10 03:50:30 -07:00
Ali Saidi
3a3e356f4e style: Remove non-leading tabs everywhere they shouldn't be. Developers should configure their editors to not insert tabs 2008-09-10 14:26:15 -04:00
Nathan Binkert
00df9016fe Rename SimConsole to Terminal since it makes more sense
--HG--
rename : src/dev/SimConsole.py => src/dev/Terminal.py
rename : src/dev/simconsole.cc => src/dev/terminal.cc
rename : src/dev/simconsole.hh => src/dev/terminal.hh
2008-06-17 20:29:06 -07:00
Gabe Black
bceaa257a3 X86: Make the e820 table manually or automatically configurable from python. 2008-06-12 00:58:36 -04:00
Gabe Black
561a541797 X86: Force the kernel to use a certain loops per jiffy instead of calculating it. 2008-06-12 00:46:16 -04:00
Gabe Black
f6a97752b0 X86: Make the amount of system memory match the hardcoded e820 info. 2008-06-12 00:45:11 -04:00
Gabe Black
633c585bfa X86: Make the regular console use the serial port as well. 2008-06-12 00:45:01 -04:00
Gabe Black
b0c52885ce X86: Change the Opteron platform to be the PC platform.
--HG--
extra : convert_revision : 2c6ffebbad04a21cef6ba3fbc1803218908a6c37
2008-03-25 02:06:53 -04:00
Ali Saidi
969688154d Simpoints: Fix regression bug/Don't set process.simpoint, if simpoint doesn't exist
--HG--
extra : convert_revision : c156c49668815755c4c788f807e8eba32151aa24
2008-03-15 22:20:09 -04:00
Lisa Hsu
02a56d8d01 Error out if -s is used without --caches (instead of saying you must specify a
CPU).

--HG--
extra : convert_revision : a3b2bfbe7e037146ac08dd08834bf255da692506
2008-02-29 01:49:36 -05:00