This patch adds a simple Python script that reads the protobuf-encoded
packet traces (not gzipped), and prints them to an ASCII trace file.
The script can also be used as a template for other packet output
formats.
This patch adds a simple Python script that reads a simple ASCII trace
format and encodes it as protobuf output compatible with the traffic
generator.
The script can also be used as a template for other packet input
formats that should be converted to the gem5 packet protobuf format.
Changeset 02321b16685f added m5_writefile to m5op_x86.S a second time,
which causes a compilation error on when compiling for x86. This
changeset reverts that changeset and fixes the error.
Fixes the tick used from rename:
- previously this gathered the tick on leaving rename which was always 1 less
than the dispatch. This conflated the decode ticks when back pressure built
in the pipeline.
- now picks up tick on entry.
Added --store_completions flag:
- will additionally display the store completion tail in the viewer.
- this highlights periods when large numbers of stores are outstanding (>16 LSQ
blocking)
Allows selection by tick range (previously this caused an infinite loop)
Used as a command in full-system scripts helps the user ensure the benchmarks have finished successfully.
For example, one can use:
/path/to/benchmark args || /sbin/m5 fail 1
and thus ensure gem5 will exit with an error if the benchmark fails.
The number of arguments specified when calling parse_int_args() in
do_exit() is incorrect. This leads to stack corruption since it causes
writes past the end of the ints array.
In order to see all registers independent of the current CPU mode, the
ARM architecture model uses the magic MISCREG_CPSR_MODE register to
change the register mappings without actually updating the CPU
mode. This hack is no longer needed since the thread context now
provides a flat interface to the register file. This patch replaces
the CPSR_MODE hack with the flat register interface.
After making the ISA an independent SimObject, it is serialized
automatically by the Python world. Previously, this just resulted in
an empty ISA section. This patch moves the contents of the ISA to that
section and removes the explicit ISA serialization from the thread
contexts, which makes it behave like a normal SimObject during
serialization.
Note: This patch breaks checkpoint backwards compatibility! Use the
cpt_upgrader.py utility to upgrade old checkpoints to the new format.
Updated the util/m5/Makefile.arm so that m5op_arm.S is used to create
a static library - libm5.a. Allowing users to insert m5
psuedo-instructions into their applications for fine-grained
checkpointing, switching cpus or dumping statistics. e.g.
#include <m5op.h>
void foo(){
...
m5_reset_stats(<delay>,<period>)
m5_work_begin(<workid>,<threadid>);
...
m5_work_end(<workid>,<threadid>);
m5_dump_stats(<delay>,<period>);
}
This patch enables dumping statistics and Linux process information on
context switch boundaries (__switch_to() calls) that are used for
Streamline integration (a graphical statistics viewer from ARM).
This patch moves all the memory backing store operations from the
independent memory controllers to the global physical memory. The main
reason for this patch is to allow address striping in a future set of
patches, but at this point it already provides some useful
functionality in that it is now possible to change the number of
memory controllers and their address mapping in combination with
checkpointing. Thus, the host and guest view of the memory backing
store are now completely separate.
With this patch, the individual memory controllers are far simpler as
all responsibility for serializing/unserializing is moved to the
physical memory. Currently, the functionality is more or less moved
from AbstractMemory to PhysicalMemory without any major
changes. However, in a future patch the physical memory will also
resolve any ranges that are interleaved and properly assign the
backing store to the memory controllers, and keep the host memory as a
single contigous chunk per address range.
Functionality for future extensions which involve CPU virtualization
also enable the host to get pointers to the backing store.
This script (util/diff_config.pl) takes two config.ini files and compares them.
It highlights value changes, as well as displaying which parts are unique to
a specific config.ini file. This is useful when trying to replicate an earlier
experiment and when trying to make small changes to an existing configuration.
When the "all" test is specified, the "tests" list should have two elements in
it, "quick" and "long", not a single element "quick,long". The later would be
appropriate as the default for one of the command line options which are split
at commas, but at that point "tests" should already be a list.
This patch updates the regress script to reflect the merge of the
SE/FS builds and the new structure of the test directories. It adds a
"mode" flag to the script, that defaults to both se and fs.
Usage: m5 writefile <filename>
File will be created in the gem5 output folder with the identical filename.
Implementation is largely based on the existing "readfile" functionality.
Currently does not support exporting of folders.
These ops allow gem5 ops to be called from within java programs like the following:
import jni.gem5Op;
public class HelloWorld {
public static void main(String[] args) {
gem5Op gem5 = new gem5Op();
System.out.println("Rpns0:" + gem5.rpns());
System.out.println("Rpns1:" + gem5.rpns());
}
static {
System.loadLibrary("gem5OpJni");
}
}
When building you need to make sure classpath include gem5OpJni.jar:
javac -classpath $CLASSPATH:/path/to/gem5OpJni.jar HelloWorld.java
and when running you need to make sure both the java and library path are set:
java -classpath $CLASSPATH:/path/to/gem5OpJni.jar -Djava.library.path=/path/to/libgem5OpJni.so HelloWorld
Implemented a pipeline activity viewer as a python script (util/o3-pipeview.py)
and modified O3 code base to support an extra trace flag (O3PipeView) for
generating traces to be used as inputs by the tool.
The end of the COPYING file was generated with:
% python ./util/find_copyrights.py configs src system tests util
Update -C command line option to spit out COPYING file
Changed the --variants option to --test-variants and added a new
--compile-variants option for variants that are only compiled
(not tested). The former still defaults to 'opt' and the latter
defaults to 'debug,fast'.
Also changed the behavior when no tests are specified from just
compiling to running the 'quick' tests.
As a result, a plain 'util/regress' invocation will now compile
(but not test) the debug and fast builds, and compile and run the
quick regressions on the opt build. This should be the default
set of tests that are run before committing. Since the nightly
regressions use this same script, this will also be the new
nightly regression behavior.
Test-only regressions can still be done by setting --compile=''.
Compile-only regressions can be done by setting --test=''.
This change replaces the mkblankimage.sh script, used for creating new disk
images, with a new gem5img.py script. The new version is written in python
instead of bash, takes its parameters from command line arguments instead of
prompting for them, and finds a free loopback device dynamically instead of
hardcoding /dev/loop1. The file system used is now optionally configurable,
and the blank image is filled by a "hole" left by lseek and write instead of
literally filling it with zeroes.
The functionality of the new script is broken into subcommands "init",
"mount", "umount", "new", "partition", and "format". "init" creates a new file
of the appropriate size, partitions it, and then formats the first (and only)
new parition. "mount" attaches a new loopback device to the first parition of
the image file and mounts it to the specified mount point. "umount" unmounts
the specified mount point and identifies and cleans up the underlying loopback
device. "new", "partition", and "format" are the individual stages of "init"
but broken out so they can be run individually. That's so an image can be
reinitialized in place if needed.
Two features of the original script are being dropped. The first is the
ability to specify a source directory to copy into the new file system. The
second is the ability to specify a list of commands to run which are expected
to (but not required to) update the permissions of the files in the new fs.
Both of these seem easy enough to do manually, especially given the "mount"
and "umount" commands, that removing them would meaningfully simplify the
script without making it less useful.
I didn't realize that the perl version existed when I started this,
this version has a lot more features than the previous one since it will
sort and separate python, system, and m5 headers in separate groups, it
will remove duplicates, it will also convert c headers to stl headers
I've renamed the check_whitespace operation to check_style. You're going to
need to change your .hg/hgrc file. While you're at it, add a pre-qrefresh
hook please.
clean up the code a little bit while we're at it.
I recommend that everyone adds the pre-qrefresh hook below since it
will make qref run the style hook and not just commit/qpush
[extensions]
style = <m5 path>/util/style.py
[hooks]
pretxncommit.style = python:style.check_whitespace
pre-qrefresh.style = python:style.check_whitespace
break it up into reading one page at a time. Also, avoid redoing a aggregating a checkpoint that's
already done.
--HG--
rename : util/checkpoint-aggregator.py => util/checkpoint_aggregator.py
add -n/--no-exec which doesn't execute scons, but just prints the command line
add -j0 which tries to calculate how many cpus you have
add -D/--build-dir to specify a build directory other than ./build
This patch includes the necessary regression updates to test the new ruby
configuration system. The patch includes support for multiple ruby protocols
and adds the ruby random tester. The patch removes atomic mode test for
ruby since ruby does not support atomic mode acceses. These tests can be
added back in when ruby supports atomic mode for real.
--HG--
rename : tests/quick/50.memtest/test.py => tests/quick/60.rubytest/test.py
1) Move alpha-specific code out of page_table.cc:serialize().
2) Begin serializing M5_pid and unserializing it, but adding an function to do optional paramIn so that old checkpoints don't need to be fixed up.
3) Fix up alpha startup code so that the unserialized M5_pid value is properly written to DTB_IPR_ASN.
4) Fix the memory unserialize that I forgot somehow in the last changeset.
5) Add in an agg_se.py to handle aggregated checkpoints. --bench foo-bar plus positional arguments foo bar are the only changes in usage from se.py.
Note this aggregation stuff has only been tested for Alpha and nothing else, though it should take a very minimal amount of work to get it to work with another ISA.
This is simply a translation of the C++ slicc into python with very minimal
reorganization of the code. The output can be verified as nearly identical
by doing a "diff -wBur".
Slicc can easily be run manually by using util/slicc
The early call to child->step() was removed earlier because it confused the
new differences-only protocol ARM sendState() was using. It's necessary that
that gets called at least once before attempting to print the initial stack
frame, though, because otherwise statetrace doesn't know what the stack
pointer is. By putting the first call to child->step() in a common spot, both
needs are met.
- insert warnings for deprecated m5ops
- reserve opcodes for Ali's stuff
- remove code for stuff that has been deprecated forever
- simplify m5op_alpha
they're all in the same place. This also involves having just one
jobfile.py and moving it into the utils directory to avoid
duplication. Lots of improvements to the utility as well.
--HG--
rename : src/python/m5/attrdict.py => src/python/m5/util/attrdict.py
rename : util/pbs/jobfile.py => src/python/m5/util/jobfile.py
rename : src/python/m5/util.py => src/python/m5/util/misc.py
rename : src/python/m5/multidict.py => src/python/m5/util/multidict.py
rename : util/stats/orderdict.py => src/python/m5/util/orderdict.py
Before this fix, the style hook would blow up when you did a qrefresh to add
a new file, but executed the qrefresh from a repository sub directory.
--HG--
extra : convert_revision : 851b0421dfa5c5b23d0f49441c4ba2e0ac579c5d
