Gabe Black
151bc018dd
X86: Add a device to back the non-existant floppy drive controller.
2009-01-25 20:34:17 -08:00
Gabe Black
dbe28da1be
X86: Add fake devices for non-existant serial ports.
2009-01-25 20:33:52 -08:00
Gabe Black
919c3e7fb6
Dev: Make the RTC device ignore writes to a read only bit.
2009-01-25 20:32:26 -08:00
Gabe Black
3f9e2350a1
Devices: Make the destructor virtual on the CopyEnginChannel object.
...
This fixes a compile warning which becomes an error.
2009-01-25 20:26:53 -08:00
Ali Saidi
37ffe52ca4
IGbE: Fix two e1000 driver bugs that I missed before.
2009-01-23 17:19:47 -05:00
Ali Saidi
140b4b891e
CopyEngine: Implement a I/OAT-like copy engine.
2009-01-17 18:55:09 -05:00
Ali Saidi
2adc60795b
IGbE: Implement header splitting with large MTU
2009-01-06 10:36:57 -05:00
Ali Saidi
9f89d43b65
IGbE: Remove is8257 variable
2009-01-06 10:36:55 -05:00
Gabe Black
f0d1a20971
PCI: Add some missing breaks to a couple case statements.
2008-12-15 00:47:01 -08:00
Author Name
13f7fdcf67
The ide_ctrl serialize and unserialize were broken.
...
Multiple channels were saving their state under the
same name. This patch separates the saved state of
the primary and secondary channel.
2008-12-14 23:29:49 -08:00
Richard Strong
dae531c049
IDE: Fix serialization for the IDE controller.
2008-12-09 10:34:08 -08:00
Gabe Black
9192b7f1ef
Devices: Clean up the IDE controller.
2008-12-07 12:59:48 -08:00
Ali Saidi
dd788a23c9
IGbE: Add support for newer 8257x based Intel NICs
2008-12-05 13:58:22 -05:00
Ali Saidi
400e516261
IGbE: Add support for TCP segment offload
2008-12-05 13:58:21 -05:00
Steve Reinhardt
27e8f3c98a
DmaDevice: fix minor type in error message.
2008-11-10 14:45:31 -08:00
Nathan Binkert
44839d6b71
Fix a few more places where the context stuff wasn't changed
2008-11-05 07:20:03 -08:00
Lisa Hsu
46b56bb7b6
Fix SPARC_FS compile
2008-11-05 16:19:17 -05:00
Lisa Hsu
d857faf073
Add in Context IDs to the simulator. From now on, cpuId is almost never used,
...
the primary identifier for a hardware context should be contextId(). The
concept of threads within a CPU remains, in the form of threadId() because
sometimes you need to know which context within a cpu to manipulate.
2008-11-02 21:57:07 -05:00
Nathan Binkert
9b8011e255
need to add packet_access.hh in order to get tempalte definition
2008-10-16 22:22:47 -07:00
Gabe Black
be6055e0f2
X86: Make auto eoi mode work in the I8259 PIC.
2008-10-12 23:27:08 -07:00
Gabe Black
fb5bb434a9
X86: Make non-specific EOI commands work.
2008-10-12 23:25:48 -07:00
Gabe Black
8e664f3959
X86: Make the I8259 PIC accept a specific EOI command.
2008-10-12 23:22:58 -07:00
Gabe Black
3a1905157e
X86: Create a mechanism for the IO APIC to access I8259 vectors.
2008-10-12 13:54:57 -07:00
Gabe Black
c35da8e495
X86: Actually use the extra vector bits we get from ICW2.
2008-10-12 13:51:48 -07:00
Gabe Black
876f4845f2
X86: Make the local APIC handle interrupt messages from the IO APIC.
2008-10-12 13:44:24 -07:00
Gabe Black
4d5c7f7038
X86: Change the default value for the IO APIC redirection table.
2008-10-12 13:35:26 -07:00
Gabe Black
557bde43c3
X86: Make APICs communicate through the memory system.
2008-10-12 13:28:54 -07:00
Gabe Black
168e524b9b
X86: Create an IO APIC device.
2008-10-11 16:08:14 -07:00
Gabe Black
a2599e4fc1
X86: Set up a mechanism for the I8254 timer to cause interrupts.
2008-10-11 15:15:34 -07:00
Gabe Black
3af428606a
X86: Rename the PC device to Pc.
...
--HG--
rename : src/dev/x86/PC.py => src/dev/x86/Pc.py
2008-10-11 02:23:40 -07:00
Gabe Black
826621eb17
X86: Bring the South Bridge device into dev/x86 and get rid of south_bridge directory.
...
--HG--
rename : src/dev/x86/south_bridge/SouthBridge.py => src/dev/x86/SouthBridge.py
rename : src/dev/x86/south_bridge/south_bridge.cc => src/dev/x86/south_bridge.cc
rename : src/dev/x86/south_bridge/south_bridge.hh => src/dev/x86/south_bridge.hh
2008-10-11 02:21:44 -07:00
Gabe Black
bc2217eefc
X86: Change I8254 and PCSpeaker devices from subdevices to SimObjects and eliminate subdevices.
...
--HG--
rename : src/dev/x86/south_bridge/i8254.cc => src/dev/x86/i8254.cc
rename : src/dev/x86/south_bridge/i8254.hh => src/dev/x86/i8254.hh
rename : src/dev/x86/south_bridge/speaker.cc => src/dev/x86/speaker.cc
rename : src/dev/x86/south_bridge/speaker.hh => src/dev/x86/speaker.hh
2008-10-11 02:16:11 -07:00
Gabe Black
a6600fdd88
Devices: Make the Intel8254Timer device only use pointers to its counters.
2008-10-11 01:49:39 -07:00
Gabe Black
539563e04b
X86: Make the CMOS and I8259 devices use IntDev and IntPin.
2008-10-11 01:45:25 -07:00
Gabe Black
119e127d71
X86: Create the IntDev and IntPin system.
...
The IntDev class is a base for anything that supports IntPins. IntPins allow
devices to generically trigger interrupts on a particular pin of an IntDev
device without having to know what the device is or what pin they're attached
to.
2008-10-11 01:37:04 -07:00
Gabe Black
8c532d6297
X86: Hook the CMOS device to the I8259 PICs.
2008-10-11 01:31:32 -07:00
Gabe Black
cf9afbba51
X86: Make the I8259 decipher the commands it's given, and add some of it's registers.
2008-10-11 01:28:35 -07:00
Gabe Black
2753c07dc5
X86: Change the I8259 from a subdevice into a real SimObject.
...
--HG--
rename : src/dev/x86/south_bridge/i8259.cc => src/dev/x86/i8259.cc
rename : src/dev/x86/south_bridge/i8259.hh => src/dev/x86/i8259.hh
2008-10-11 01:22:20 -07:00
Gabe Black
f22c7d48f3
X86: Change the CMOS from a sub-device to a real SimObject
...
--HG--
rename : src/dev/x86/south_bridge/cmos.cc => src/dev/x86/cmos.cc
rename : src/dev/x86/south_bridge/cmos.hh => src/dev/x86/cmos.hh
2008-10-11 01:13:11 -07:00
Gabe Black
f85a7f00c0
X86: Make the time on the RTC configurable.
2008-10-10 23:42:31 -07:00
Gabe Black
57d663877e
X86: Fix compilation with new eventq API.
2008-10-10 03:50:07 -07:00
Nathan Binkert
94b08bed07
SimObjects: Clean up handling of C++ namespaces.
...
Make them easier to express by only having the cxx_type parameter which
has the full namespace name, and drop the cxx_namespace thing.
Add support for multiple levels of namespace.
2008-10-09 22:19:39 -07:00
Nathan Binkert
e06321091d
eventq: convert all usage of events to use the new API.
...
For now, there is still a single global event queue, but this is
necessary for making the steps towards a parallelized m5.
2008-10-09 04:58:24 -07:00
Nathan Binkert
886c5f8fe5
SINIC: Commit old code from ASPLOS 2006 studies.
...
NOTE: This code was written by Nathan Binkert in 2006 and is properly copyright
"The Regents of the University of Michigan"
2008-10-09 04:58:23 -07:00
Steve Reinhardt
7bf6a219db
Make overriding port assignments in Python work,
...
and print better error messages when it doesn't.
2008-09-29 23:30:14 -07:00
Nathan Binkert
80d9be86e6
gcc: Add extra parens to quell warnings.
...
Even though we're not incorrect about operator precedence, let's add
some parens in some particularly confusing places to placate GCC 4.3
so that we don't have to turn the warning off. Agreed that this is a
bit of a pain for those users who get the order of operations correct,
but it is likely to prevent bugs in certain cases.
2008-09-27 21:03:49 -07:00
Nathan Binkert
ce3d8c2b03
atomicio: provide atomic read and write functions.
...
These functions keep trying to read and write until all data has been
transferred, or an error occurrs. In the case where an end of file
hasn't been reached, but all of the bytes have not been read/written,
try again. On EINTR, try again.
2008-09-19 09:42:31 -07:00
Nathan Binkert
ea83cedcf6
Check the return value of I/O operations for failure
2008-09-19 09:11:42 -07:00
Ali Saidi
3a3e356f4e
style: Remove non-leading tabs everywhere they shouldn't be. Developers should configure their editors to not insert tabs
2008-09-10 14:26:15 -04:00
Clint Smullen
4aa017affc
Device: Fix bug in DmaPort::recvRetry. The interface attempts to send the same packet again.
...
It doesn't cause a problem currently, however with a different Memory Object it could cause
problems
2008-08-26 02:37:26 -04:00
Ali Saidi
3d5fe0c372
IGbE: Patches I neglected to apply before pushing the previous igbe changeset
2008-08-24 15:27:49 -04:00
Ali Saidi
6248e12704
Add the ability to specify a think time before descriptor fetch/writeback starts/ends as well as after read/write dmas
2008-08-13 17:41:58 -04:00
Ali Saidi
549c43b2d0
Add the ability for a DMA to tack on an extra delay after the DMA is actually finished.
2008-08-13 17:41:56 -04:00
Ali Saidi
05954e1ba7
More subtle fixes to how interrupts are supposed to work in the device. Fix postedInterrupts statistics.
2008-08-13 16:30:30 -04:00
Nathan Binkert
50ef39af82
sockets: Add a function to disable all listening sockets.
...
When invoking several copies of m5 on the same machine at the same
time, there can be a race for TCP ports for the terminal connections
or remote gdb. Expose a function to disable those ports, and have the
regression scripts disable them. There are some SimObjects that have
no other function than to be used with ports (NativeTrace and
EtherTap), so they will panic if the ports are disabled.
2008-08-03 18:19:55 -07:00
Ali Saidi
7a83c50a59
Fix cases where RADV interrupt timer is used and make ITR interrupt moderation not always delay if no interrupts have been posted for the ITR value.
2008-07-01 10:30:08 -04:00
Nathan Binkert
1099a9838a
Ethernet: share statistics between all ethernet devices and apply some
...
of those statistics to the e1000 model.
2008-06-17 22:22:44 -07:00
Nathan Binkert
87d03d00cd
inet: initialization fixes.
...
Make sure variables are properly initialized and also make sure that
truth testing works properly.
2008-06-17 22:14:12 -07:00
Nathan Binkert
8042b8f4c7
PacketFifo: Get slack out of the EthPacketData structure. This allows
...
a packet to exist in multiple FIFOs if desired.
2008-06-17 21:34:27 -07:00
Nathan Binkert
9dc4e2952c
rename MipsConsole to MipsBackdoor
...
--HG--
rename : src/dev/mips/MipsConsole.py => src/dev/mips/MipsBackdoor.py
rename : src/dev/mips/console.cc => src/dev/mips/backdoor.cc
rename : src/dev/mips/console.hh => src/dev/mips/backdoor.hh
2008-06-17 20:39:51 -07:00
Nathan Binkert
934523c3a0
rename AlphaConsole to AlphaBackdoor
...
--HG--
rename : src/dev/alpha/AlphaConsole.py => src/dev/alpha/AlphaBackdoor.py
rename : src/dev/alpha/console.cc => src/dev/alpha/backdoor.cc
rename : src/dev/alpha/console.hh => src/dev/alpha/backdoor.hh
2008-06-17 20:36:39 -07:00
Nathan Binkert
6ff4539901
Change the default output filename for the terminal so it's more obvious.
...
--HG--
rename : tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/system.terminal
rename : tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/system.terminal
rename : tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/system.terminal
rename : tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/system.terminal
rename : tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/console.drivesys.sim_console => tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/drivesys.terminal
rename : tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/console.testsys.sim_console => tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/testsys.terminal
2008-06-17 20:30:37 -07:00
Nathan Binkert
00df9016fe
Rename SimConsole to Terminal since it makes more sense
...
--HG--
rename : src/dev/SimConsole.py => src/dev/Terminal.py
rename : src/dev/simconsole.cc => src/dev/terminal.cc
rename : src/dev/simconsole.hh => src/dev/terminal.hh
2008-06-17 20:29:06 -07:00
Gabe Black
2b4874449c
Alpha: Get rid of an old include of a non-existant file.
2008-06-12 01:54:21 -04:00
Gabe Black
c625cf0ae1
X86: Make the code compile as 32 bit.
2008-06-12 01:00:05 -04:00
Gabe Black
da20c0ec54
X86: Make sure there's something to catch when the kernel messes with ports "behind" the pci config magic ports.
2008-06-12 00:58:13 -04:00
Gabe Black
1f5b992b58
X86: Make the platform object initialize channel 0 of the PIT.
2008-06-12 00:56:54 -04:00
Gabe Black
16e26fbf03
X86: Hook the speaker device to the pit device.
2008-06-12 00:56:17 -04:00
Gabe Black
da7f512067
Timer: Fill out the periodic modes a little.
2008-06-12 00:56:07 -04:00
Gabe Black
4f9a0402f6
Dev: Seperate the 8254 timer from tsunami and use it in that and the PC.
2008-06-12 00:54:48 -04:00
Ali Saidi
f5e36d156d
IGbE: Implement sending packet that is contained in more than 2 descriptors.
...
--HG--
extra : convert_revision : 8fb7d5fad5cb840f69c31aa8b331dbe09e46ee9d
2008-05-20 16:06:56 -04:00
Ali Saidi
e71a5270a2
Make sure that output files are always checked success before they're used.
...
Make OutputDirectory::resolve() private and change the functions using
resolve() to instead use create().
--HG--
extra : convert_revision : 36d4be629764d0c4c708cec8aa712cd15f966453
2008-05-15 19:10:26 -04:00
Ali Saidi
1605fbebc8
IGbE: Fix bug that limits wire performance a bit
...
--HG--
extra : convert_revision : 3f93c17f647a6955dab861da211174de856ee02c
2008-03-25 15:58:54 -04:00
Gabe Black
93dd1978a7
X86: Put an RTC into the CMOS part of the southbridge.
...
--HG--
extra : convert_revision : a614373236fe75db6e6181fc152a02b541a131f3
2008-03-25 02:15:23 -04:00
Gabe Black
e5bdae15f3
Devices: Separate out the MC146818 RTC so both Alpha and X86 can use it.
...
--HG--
extra : convert_revision : 1e7f5185654ed0845678c2169c702d3b977159ed
2008-03-25 02:15:06 -04:00
Gabe Black
af9a57566a
X86: Turn #defines into consts.
...
--HG--
extra : convert_revision : c0416de5d88ca39f54494418768e68a93aa4f2aa
2008-03-25 02:09:18 -04:00
Gabe Black
48409ca512
X86: Start implementing the south bridge stuff.
...
--HG--
extra : convert_revision : 92918c05eb3363155d78889bdab17baa8eae9dca
2008-03-25 02:08:54 -04:00
Gabe Black
b0c52885ce
X86: Change the Opteron platform to be the PC platform.
...
--HG--
extra : convert_revision : 2c6ffebbad04a21cef6ba3fbc1803218908a6c37
2008-03-25 02:06:53 -04:00
Steve Reinhardt
93ab43288a
Don't FastAlloc MSHRs since we don't allocate them on the fly.
...
--HG--
extra : convert_revision : 02775cfb460afe6df0df0938c62cccd93a71e775
2008-03-24 01:08:02 -04:00
Gabe Black
7bde0285e5
X86: Get PCI config space to work, and adjust address space prefix numbering scheme.
...
--HG--
extra : convert_revision : 2b382f478ee8cde3a35aa4c105196f200bc7afa6
2008-02-26 23:38:01 -05:00
Ali Saidi
d167e2bb97
IGbE: Fix a couple of bugs.
...
--HG--
extra : convert_revision : a1f16bd82b6fbd5b6b5dc0f08b9e69858bea86ca
2008-02-10 19:32:12 -05:00
Stephen Hines
6cc1573923
Make the Event::description() a const function
...
--HG--
extra : convert_revision : c7768d54d3f78685e93920069f5485083ca989c0
2008-02-06 16:32:40 -05:00
Korey Sewell
2692590049
Add in files from merge-bare-iron, get them compiling in FS and SE mode
...
--HG--
extra : convert_revision : d4e19afda897bc3797868b40469ce2ec7ec7d251
2007-11-13 16:58:16 -05:00
Ali Saidi
538fae951b
Traceflags: Add SCons function to created a traceflag instead of having one file with them all.
...
--HG--
extra : convert_revision : 427f6bd8f050861ace3bc0d354a1afa5fc8319e6
2007-10-31 01:21:54 -04:00
Ali Saidi
7597f87430
Base: Rework the way M5 provides and creates random numbers.
...
--HG--
extra : convert_revision : 10ec3484647b3acb8e821f8520f97d535e41e861
2007-10-31 01:21:54 -04:00
Gabe Black
8fe672551e
X86: Make an x86 platform object.
...
--HG--
extra : convert_revision : 7d64d3e78960f3bb937579f5d10937bed5f197be
2007-10-07 17:48:06 -07:00
Ali Saidi
0acf891c32
CPU: fix sparc_fs booting with SimpleTimingCPU.
...
--HG--
extra : convert_revision : 3d95f6daa7f0e8e376d1a880f64c056619263885
2007-10-01 02:55:27 -04:00
Ali Saidi
d325f49b70
Rename cycles() function to ticks()
...
--HG--
extra : convert_revision : 790eddb793d4f5ba35813d001037bd8601bd76a5
2007-09-28 13:21:52 -04:00
Gabe Black
418ddf43e6
X86: Get X86_FS to compile.
...
--HG--
extra : convert_revision : fb973bcf13648876d5691231845dd47a2be50f01
2007-09-24 17:39:56 -07:00
Ali Saidi
5f187e592e
Devices: More fixes to Intel NIC Model.
...
--HG--
extra : convert_revision : 14306d3cd79bbef7decdf2fd370ed7e7f2b10a93
2007-09-12 15:24:23 -04:00
Miles Kaufmann
e4eea9ee04
Fix miscellaneous small typos.
...
--HG--
extra : convert_revision : bfc0ac8e1c8a5d01d9fa5203184bbf99c8361da3
2007-08-30 15:16:59 -04:00
Miles Kaufmann
cd890576bb
devices: Avoid using assert() to catch misconfiguration
...
--HG--
extra : convert_revision : 2c6710e01a4402793a2e0eafcc829df19d03dda3
2007-08-30 15:16:59 -04:00
Miles Kaufmann
54cc0053f0
params: Deprecate old-style constructors; update most SimObject constructors.
...
SimObjects not yet updated:
- Process and subclasses
- BaseCPU and subclasses
The SimObject(const std::string &name) constructor was removed. Subclasses
that still rely on that behavior must call the parent initializer as
: SimObject(makeParams(name))
--HG--
extra : convert_revision : d6faddde76e7c3361ebdbd0a7b372a40941c12ed
2007-08-30 15:16:59 -04:00
Gabe Black
7227ab5f22
Merge with head
...
--HG--
extra : convert_revision : cc73b9aaf73e9dacf52f3350fa591e67ca4ccee6
2007-08-26 21:45:40 -07:00
Ali Saidi
bba265ccd8
PCI: Move PCI Configuration data into devices now that we can inherit parameters.
...
--HG--
extra : convert_revision : bd2214b28fb46a9a9e9e204e0539be33acb548ad
2007-08-16 16:49:05 -04:00
Ali Saidi
773cb77656
Devices: Make EtherInts connect in the same way memory ports currently do.
...
--HG--
extra : convert_revision : 765b096785a77df9adc4791c9101b90696bd7be2
2007-08-16 16:49:02 -04:00
Ali Saidi
06a9f58c68
DMA: Add IOCache and fix bus bridge to optionally only send requests one
...
way so a cache can handle partial block requests for i/o devices.
--HG--
extra : convert_revision : a68b5ae826731bc87ed93eb7ef326a2393053964
2007-08-10 16:14:01 -04:00
Nathan Binkert
f0fef8f850
Merge python and x86 changes with cache branch
...
--HG--
extra : convert_revision : e06a950964286604274fba81dcca362d75847233
2007-07-26 23:15:49 -07:00
Nathan Binkert
abc76f20cb
Major changes to how SimObjects are created and initialized. Almost all
...
creation and initialization now happens in python. Parameter objects
are generated and initialized by python. The .ini file is now solely for
debugging purposes and is not used in construction of the objects in any
way.
--HG--
extra : convert_revision : 7e722873e417cb3d696f2e34c35ff488b7bff4ed
2007-07-23 21:51:38 -07:00
Steve Reinhardt
a51e16dc89
Merge of DPRINTF fixes from head.
...
--HG--
extra : convert_revision : f99a33b2df6a6c5592856d17d00e73ee83267442
2007-07-14 12:09:37 -07:00