in makeDualRoot() the etherlink interfaces are set using the tsunami interface
however, they are set again a few lines later based on whether or not the system
is a realview or tsunami system; the original assignment is always overwritten
or there will be a fatal. this seems like an artifact from when tsunami was the
only type of system capable of running with the dual option.
This patch bumps the bus clock speed such that the interconnect does
not become a bottleneck with a DDR4-2400-x64 DRAM delivering 19.2
GByte/s theoretical max.
Adds the parameter --num-work-ids to Options.py and reads the parameter
into the System params in Simulation.py. This parameter enables setting
the number of possible work items to different than 16. Support for this
parameter already exists in src/sim/System.py, so this changeset only
affects the Python config files.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
A recent changeset altered the default memory class to DRAMCtrl. In se mode,
ruby uses the physical memory to check if a given address is within the bounds
of the physical memory. SimpleMemory is enough for this. Moreover,
SimpleMemory does not check whether it is connected or not, something which
DRAMCtrl does.
This patch renames the not-so-simple SimpleDRAM to a more suitable
DRAMCtrl. The name change is intended to ensure that we do not send
the wrong message (although the "simple" in SimpleDRAM was originally
intended as in cleverly simple, or elegant).
As the DRAM controller modelling work is being presented at ISPASS'14
our hope is that a broader audience will use the model in the future.
--HG--
rename : src/mem/SimpleDRAM.py => src/mem/DRAMCtrl.py
rename : src/mem/simple_dram.cc => src/mem/dram_ctrl.cc
rename : src/mem/simple_dram.hh => src/mem/dram_ctrl.hh
Make the default memory type DDR3-1600 x64, and use the open-adaptive
page policy. This change is aiming to ensure that users by default are
using a realistic memory system.
This patch adds a configuration that simplifies evaluation of DRAM
controller configurations by automating a sweep of stride size and
bank parallelism. It works in a rather unconventional way, as it needs
to print the traffic generator stimuli based on the memory
organisation. Hence, it starts by configuring the memory, then it
prints a traffic-generator config file, and loads it.
The resulting stats have one period per data point, identified by the
stride size, and the number of banks being used.
This patch adds the row bits to the name of the address mapping
schemes to make it more clear that all the current schemes places the
row bits as the most significant bits.
This helps in configuring the network interfaces from the python script and
these objects no longer rely on the network object for the timing information.
The code that creates test and drive systems is being moved to separate
functions so as to make the code more readable. Ultimately the two
functions would be combined so that the replicated code is eliminated.
The patch removes the ruby_fs.py file. The functionality is being moved to
fs.py. This would being ruby fs simulations in line with how ruby se
simulations are started (using --ruby option). The alpha fs config functions
are being combined for classing and ruby memory systems. This required
renaming the piobus in ruby to iobus. So, we will have stats being renamed
in the stats file for ruby fs regression.
Piobus was recently added to se scripts for ruby so that the interrupt
controller can be connected to something (required since the interrupt
controller sends address range messages). This patch removes the piobus
and instead, the pio port of ruby port will now ignore the range change
messages in se mode.
Couple of errors were discovered in 4eec7bdde5b0 which necessitated this patch.
Firstly, we create interrupt controllers in the se mode, but no piobus was
being created. RubyPort, which earlier used to ignore range changes now
forwards those to the piobus. The lack of piobus resulted in segmentation
fault. This patch creates a piobus even in se mode. It is not created only
when some tester is running. Secondly, I had missed out on modifying port
connections for other coherence protocols.
Currently, the interrupt controller in x86 is connected to the io bus
directly. Therefore the packets between the io devices and the interrupt
controller do not go through ruby. This patch changes ruby port so that
these packets arrive at the ruby port first, which then routes them to their
destination. Note that the patch does not make these packets go through the
ruby network. That would happen in a subsequent patch.
Modifies FSConfig.py to enable ARMv8 compatibility.
To boot gem5 with ARMv8:
Download the v8 kernel, .dtb file, and root FS from: http://gem5.org/Download
Download the ARMv8 toolchain, and add the bin dir to your path:
http://www.linaro.org/engineering/engineering-projects/armv8
Build gem5 for ARM
Build the v8 bootloader (in gem5/system/arm/aarch64_bootloader)
Make script in gem5/system/arm/aarch64_bootloader will require v8 toolchain,
drop the produced boot_emm.arm64 in $(M5_PATH)/binaries/
Run:
$ build/ARM/gem5.fast configs/example/fs.py --machine-type=VExpress_EMM64 \
--kernel=/path/to/kernel/vmlinux-linaro-tracking \
--dtb-filename=/path/to/dtb/rtsm_ve-aemv8a.dtb \
--disk-image=/path/to/img/linaro-minimal-armv8.img
This patch adds DRAMSim2 as a memory controller by wrapping the
external library and creating a sublass of AbstractMemory that bridges
between the semantics of gem5 and the DRAMSim2 interface.
The DRAMSim2 wrapper extracts the clock period from the config
file. There is no way of extracting this information from DRAMSim2
itself, so we simply read the same config file and get it from there.
To properly model the response queue, the wrapper keeps track of how
many transactions are in the actual controller, and how many are
stacking up waiting to be sent back as responses (in the wrapper). The
latter requires us to move away from the queued port and manage the
packets ourselves. This is due to DRAMSim2 not having any flow control
on the response path.
DRAMSim2 assumes that the transactions it is given are matching the
burst size of the choosen memory. The wrapper checks to ensure the
cache line size of the system matches the burst size of DRAMSim2 as
there are currently no provisions to split the system requests. In
theory we could allow a cache line size smaller than the burst size,
but that would lead to inefficient use of the DRAM, so for not we
fatal also in this case.
Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.
Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.
Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
The first two levels (L0, L1) are private to the core, the third level (L2)is
possibly shared. The protocol supports clustered designs. For example, one
can have two sets of two cores. Each core has an L0 and L1 cache. There are
two L2 controllers where each set accesses only one of the L2 controllers.
For some reason, the default x86 kernel is specified in
tests/configs/x86_generic.py and not in configs/common/FSConfig.py,
where the kernels for all the other ISAs are. This means that
running configs/example/fs.py for x86 fails because no kernel
is specified. Moving the specification over fixes this problem.
There is another problem that this uncovers, which is that going
past the init stage (i.e., past where the regression test stops)
fails because the fsck test on the disk device fails, but that's
a separate issue.
The directory controller should not have the sharer field since there is
only one level 2 cache. Anyway the field was not in use. The owner field
was being used to track the l2 cache version (in case of distributed l2) that
has the cache block under consideration. The information is not required
since the version of the level 2 cache can be obtained from a subset of the
address bits.
the current implementation of the fetch buffer in the o3 cpu
is only allowed to be the size of a cache line. some
architectures, e.g., ARM, have fetch buffers smaller than a cache
line, see slide 22 at:
http://www.arm.com/files/pdf/at-exploring_the_design_of_the_cortex-a15.pdf
this patch allows the fetch buffer to be set to values smaller
than a cache line.
This Python script generates an ARM DS-5 Streamline .apc project based
on gem5 run. To successfully convert, the gem5 runs needs to be run
with the context-switch-based stats dump option enabled (The guest
kernel also needs to be patched to allow gem5 interrogate its task
information.) See help for more information.
A couple of recent changesets added/deleted/edited some variables
that are needed for running the example ruby scripts. This changeset
edits these scripts to bring them to a working state.
In order to support m5ops in virtualized environments, we need to use
a memory mapped interface. This changeset adds support for that by
reserving 0xFFFF0000-0xFFFFFFFF and mapping those to the generic IPR
interface for m5ops. The mapping is done in the
X86ISA::TLB::finalizePhysical() which means that it just works for all
of the CPU models, including virtualized ones.
Recent changes added setting of system-wide cache line size and these settings
occur in the top-level configs (se.py and fs.py). This setting also needs to
take place in ruby_fs.py. This change sets the cache line size as appropriate.
The previous changeset (9816) that fixes the use of max ticks introduced the
variable cpt_starttick, which is used for setting the relative max tick.
Unfortunately, with checkpointing at an instruction count or with simpoints,
the checkpoint tick is not stored conveniently, so to ensure that cpt_starttick
is initialized, set it to 0. Also, if using --rel-max-tick, check the use of
instruction counts or simpoints to warn the user that the max tick setting does
not include the checkpoint ticks.
The routers are created before the network class. This results in the routers
becoming children of the first link they are connected to and they get generic
names like int_node and node_b. This patch creates the network object first
and passes it to the topology creation function. Now the routers are children
of the network object and names are much more sensible.
The number of transitions per cycle that a controller can carry out is
a proxy for the number of ports that a controller has. This value is
currently 32 which is way too high. The patch introduces an option
for the number of ports and uses this option in the protocol files
to set the number of transitions. The default value is being set to
4. None of the se regressions change. Ruby stats for the fs regression
change and are being updated.
This patch adds support for specifying multi-channel memory
configurations on the command line, e.g. 'se/fs.py
--mem-type=ddr3_1600_x64 --mem-channels=4'. To enable this, it
enhances the functionality of MemConfig and moves the existing
makeMultiChannel class method from SimpleDRAM to the support scripts.
The se/fs.py example scripts are updated to make use of the new
feature.
This patch changes the default parameter value of conf_table_reported
to match the common case. It also simplifies the regression and config
scripts to reflect this change.
This patch adds the notion of voltage domains, and groups clock
domains that operate under the same voltage (i.e. power supply) into
domains. Each clock domain is required to be associated with a voltage
domain, and the latter requires the voltage to be explicitly set.
A voltage domain is an independently controllable voltage supply being
provided to section of the design. Thus, if you wish to perform
dynamic voltage scaling on a CPU, its clock domain should be
associated with a separate voltage domain.
The current implementation of the voltage domain does not take into
consideration cases where there are derived voltage domains running at
ratio of native voltage domains, as with the case where there can be
on-chip buck/boost (charge pumps) voltage regulation logic.
The regression and configuration scripts are updated with a generic
voltage domain for the system, and one for the CPUs.
