creation and initialization now happens in python. Parameter objects
are generated and initialized by python. The .ini file is now solely for
debugging purposes and is not used in construction of the objects in any
way.
--HG--
extra : convert_revision : 7e722873e417cb3d696f2e34c35ff488b7bff4ed
src/arch/x86/isa/macroop.isa:
Make microOp vs microop and macroOp vs macroop capitilization consistent. Also fill out the emulation environment handling a little more, and use an object to pass around output code.
src/arch/x86/isa/microops/base.isa:
Make microOp vs microop and macroOp vs macroop capitilization consistent. Also adjust python to C++ bool translation.
--HG--
extra : convert_revision : 6f4bacfa334c42732c845f9a7f211cbefc73f96f
into ahchoo.blinky.homelinux.org:/home/gblack/m5/newmem-x86
src/arch/mips/utility.hh:
src/arch/x86/SConscript:
Hand merge
--HG--
extra : convert_revision : 0ba457aab52bf6ffc9191fd1fe1006ca7704b5b0
1. Make sure connectMemPorts() only gets called when the CPU's peer gets changed. This is done by making setPeer() virtual, and overriding it in the CPU's ports. When it gets called on a CPU's port (dcache specifically), it calls the normal setPeer() function, and also connectMemPorts().
2. Consolidate redundant code that handles switching in a CPU.
src/cpu/base.cc:
Move common code of switching over peers to base CPU.
src/cpu/base.hh:
Move common code of switching over peers to BaseCPU.
src/cpu/o3/cpu.cc:
Add in function that updates thread context's ports.
Also use updated function to takeOverFrom() in BaseCPU. This gets rid of some repeated code.
src/cpu/o3/cpu.hh:
Include function to update thread context's memory ports.
src/cpu/o3/lsq.hh:
Add function to dcache port that will update the memory ports upon getting a new peer.
Also include a function that will tell the CPU to update those memory ports.
src/cpu/o3/lsq_impl.hh:
Add function that will update the memory ports upon getting a new peer.
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Add function that will update thread context's memory ports upon getting a new peer.
Also use the new BaseCPU's take over from function.
src/cpu/simple/atomic.hh:
Add in function (and dcache port) that will allow the dcache to update memory ports when it gets assigned a new peer.
src/cpu/simple/timing.hh:
Add function that will update thread context's memory ports upon getting a new peer.
src/mem/port.hh:
Make setPeer virtual so that other classes can override it.
--HG--
extra : convert_revision : 2050f1241dd2e83875d281cfc5ad5c6c8705fdaf
into zeep.pool:/z/saidi/work/m5.newmem
src/cpu/simple/atomic.cc:
merge steve's changes in.
--HG--
extra : convert_revision : a17eda37cd63c9380af6fe68b0aef4b1e1974231
Add support for a twin 64 bit int load
Add Memory barrier and write barrier flags as appropriate
Make atomic memory ops atomic
src/arch/alpha/isa/mem.isa:
src/arch/alpha/locked_mem.hh:
src/cpu/base_dyn_inst.hh:
src/mem/cache/cache_blk.hh:
src/mem/cache/cache_impl.hh:
rename store conditional stuff as extra data so it can be used for conditional swaps as well
src/arch/alpha/types.hh:
src/arch/mips/types.hh:
src/arch/sparc/types.hh:
add a largest read data type for statically allocating read buffers in atomic simple cpu
src/arch/isa_parser.py:
Add support for a twin 64 bit int load
src/arch/sparc/isa/decoder.isa:
Make atomic memory ops atomic
Add Memory barrier and write barrier flags as appropriate
src/arch/sparc/isa/formats/mem/basicmem.isa:
add post access code block and define a twinload format for twin loads
src/arch/sparc/isa/formats/mem/blockmem.isa:
remove old microcoded twin load coad
src/arch/sparc/isa/formats/mem/mem.isa:
swap.isa replaces the code in loadstore.isa
src/arch/sparc/isa/formats/mem/util.isa:
add a post access code block
src/arch/sparc/isa/includes.isa:
need bigint.hh for Twin64_t
src/arch/sparc/isa/operands.isa:
add a twin 64 int type
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
add support for twinloads
add support for swap and conditional swap instructions
rename store conditional stuff as extra data so it can be used for conditional swaps as well
src/mem/packet.cc:
src/mem/packet.hh:
Add support for atomic swap memory commands
src/mem/packet_access.hh:
Add endian conversion function for Twin64_t type
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/request.hh:
Add support for atomic swap memory commands
Rename sc code to extradata
--HG--
extra : convert_revision : 69d908512fb34a4e28b29a6e58b807fb1a6b1656
function into Alpha ISA description. write now just generically
returns a result value if the res pointer is non-null (which means
we can only provide a res pointer if we expect a valid result
value).
--HG--
extra : convert_revision : fb1c315515787f5fbbf7d1af7e428bdbfe8148b8
Created MemCmd class to wrap enum and provide handy methods to
check attributes, convert to string/int, etc.
--HG--
extra : convert_revision : 57f147ad893443e3a2040c6d5b4cdb1a8033930b
Increment instruction count on first micro-op instead of last
src/arch/sparc/isa/decoder.isa:
Implement a twin load for ASI_LDTX_P(0xe2)
src/arch/sparc/isa/formats/mem/blockmem.isa:
set the new flag IsFirstMicroOp when needed
src/cpu/simple/atomic.cc:
Increment instruction count on first micro-op instead of last (because if we take a fault on a micro coded instruction it should be counted twice acording to legion)
src/cpu/static_inst.hh:
Add IsFirstMicroop flag to static insts
--HG--
extra : convert_revision : 02bea93d38c03bbafe4570665eb4c01c11caa2fc
configs/common/FSConfig.py:
seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
Use instruction count from cpu rather than cycles because that is what legion does
we can change it back after were done with legion
src/base/bitfield.hh:
add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
change asserts of packet success to if panics wrapped with NDEBUG defines
so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
convert some tabs to spaces
src/python/m5/objects/T1000.py:
add more fake devices for each l1 bank and each memory controller
--HG--
extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
src/arch/SConscript:
add mmaped_ipr.hh to switch headers
src/arch/sparc/asi.hh:
make ASI_IMPLICT=0 so by default nothing needs to be done
src/arch/sparc/miscregfile.hh:
miscregfile no longer needs to include asi.hh
src/arch/sparc/tlb.cc:
src/arch/sparc/tlb.hh:
implement panic instructions for mmaped ipr reads
src/cpu/simple/atomic.cc:
add check for mmaped iprs and handle them if it exists
src/mem/request.hh:
allocate space in the flags for mmaped iprs. Put in in the first 8 bits so that by default its fast. Move the other flags up 8 bits
--HG--
extra : convert_revision : 31255b0494588c4d06a727fe35241121d741b115
Right now this introduces a minor memory leak as old physPorts and virtPorts are not deleted when new ones are created. A flyspray task has been created for this issue. It can not be resolved until we determine how the bus will handle giving out ID's to functional ports that may be deleted.
src/cpu/o3/cpu.cc:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Change the setup of the physPort and virtPort to instead happen every time the CPU has a context activated. This is a little high overhead, but keeps it working correctly when the CPU does not have a physical memory attached to it until it switches in (like the case of switch CPUs).
src/cpu/o3/thread_context.hh:
Change function from being called at init() to just being called whenever the memory ports need to be connected.
src/cpu/o3/thread_context_impl.hh:
Update this to not delete the port if it's the same as the virtPort.
src/cpu/thread_context.hh:
Change function from being called at init() to whenever the memory ports need to be connected.
src/cpu/thread_state.cc:
Instead of initializing the ports, simply connect them, deleting any old ports that might exist. This allows these functions to be called multiple times.
src/cpu/thread_state.hh:
Ports are no longer initialized, but rather connected at context activation time.
--HG--
extra : convert_revision : e399ce5dfbd6ad658c953a7c9c7b69b89a70219e
src/cpu/o3/cpu.cc:
Handle draining properly when CPU isn't actually being used.
src/cpu/simple/atomic.cc:
Be sure to set status properly when draining.
src/mem/bus.cc:
Fix for draining.
--HG--
extra : convert_revision : d9796e6693e974f022159029fc9743c49a970c8f
src/cpu/base.cc:
Move clock phase drift code to the base CPU so that any CPU model can use it.
src/cpu/base.hh:
Added two functions to help get the next cycle the CPU should be scheduled.
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Use the function now in BaseCPU.
--HG--
extra : convert_revision : 444494b66ffc85fc473c23f57683c5f9458ad80c
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix
configs/example/fs.py:
configs/example/se.py:
src/mem/tport.hh:
Hand merge.
--HG--
extra : convert_revision : b9df95534d43b3b311f24ae24717371d03d615bf
configs/example/fs.py:
configs/example/se.py:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.cc:
src/cpu/thread_state.hh:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
No need for mem parameter any more.
src/cpu/checker/cpu.cc:
Use new constructor for simple thread (no more MemObject parameter).
src/cpu/checker/cpu.hh:
Remove MemObject parameter.
src/cpu/memtest/memtest.hh:
Ports now take in their MemObject owner.
src/cpu/o3/alpha/cpu_builder.cc:
Remove mem parameter.
src/cpu/o3/alpha/cpu_impl.hh:
Remove memory parameter and clean up handling of TranslatingPort.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/params.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/atomic.cc:
Remove memory parameter.
--HG--
extra : convert_revision : 43cb44a33b31320d44b69679dcf646c0380d07d3
