Gabe Black
dc53ca89f6
X86: Add a flag to force memory accesses to happen at CPL 0.
2009-02-25 10:18:22 -08:00
Gabe Black
897c374892
X86: Move where CS is set so CPL checks work out.
2009-02-25 10:18:16 -08:00
Gabe Black
710b43dfbd
X86: Implement inUserMode for x86.
2009-02-25 10:18:06 -08:00
Gabe Black
1cedc748d4
X86: Add a trace flag for tracing faults.
2009-02-25 10:17:59 -08:00
Gabe Black
eec3f49a57
X86: Implement the sysret instruction in long mode.
2009-02-25 10:17:54 -08:00
Gabe Black
6325245e3e
X86: Implement the longmode versions of the syscall instruction.
2009-02-25 10:17:49 -08:00
Gabe Black
dadc30b0a4
X86: Make the microcode assembler recognize r8-r15.
2009-02-25 10:17:43 -08:00
Gabe Black
fcad6e3b13
X86: Add a wrattr microop.
2009-02-25 10:17:38 -08:00
Gabe Black
e4ede69b2f
X86: Add a trace flag for the page table walker.
2009-02-25 10:17:27 -08:00
Gabe Black
99aa121fca
X86: Make exceptions handle stack switching.
2009-02-25 10:17:19 -08:00
Gabe Black
aa7bc1be74
X86: Implement the LTR instruction.
2009-02-25 10:17:14 -08:00
Gabe Black
08f3a126d5
X86: Fix segment limit checking.
2009-02-25 10:17:08 -08:00
Gabe Black
2f31643db5
X86: Add a check to chks to verify a task state segment descriptor.
2009-02-25 10:17:02 -08:00
Gabe Black
7b1cb74ac3
X86: Add a check to chks which raises #GP(selector) if selector is NULL or not in the GDT.
2009-02-25 10:16:54 -08:00
Gabe Black
82288e7c3e
X86: Add makeAtomicResponse to the read/write functions of x86 devices.
2009-02-25 10:16:43 -08:00
Gabe Black
7462cb0842
X86: Fix the timing mode of the page table walker.
2009-02-25 10:16:34 -08:00
Gabe Black
f02df8cb74
X86: Update stats for in place TLB miss handling.
2009-02-25 10:16:29 -08:00
Gabe Black
40fdba2454
X86: Make the X86 TLB take advantage of delayed translations, and get rid of the fake TLB miss faults.
2009-02-25 10:16:21 -08:00
Gabe Black
6ed47e9464
CPU: Implement translateTiming which defers to translateAtomic, and convert the timing simple CPU to use it.
2009-02-25 10:16:15 -08:00
Gabe Black
15940d06b5
SPARC: Adjust a few instructions to not write registers in initiateAcc.
2009-02-25 10:16:04 -08:00
Gabe Black
1b336a8fe7
X86: Make the stupd microop not update registers in initiateAcc.
2009-02-25 10:15:56 -08:00
Gabe Black
5605079b1f
ISA: Replace the translate functions in the TLBs with translateAtomic.
2009-02-25 10:15:44 -08:00
Gabe Black
a1aba01a02
CPU: Get rid of translate... functions from various interface classes.
2009-02-25 10:15:34 -08:00
Nathan Binkert
f3090e5b70
stats: reorganize how parameters are stored and accessed.
2009-02-23 12:22:19 -08:00
Nathan Binkert
aaf98aaa32
stats: move the limits stuff into the types.hh file
2009-02-23 12:22:18 -08:00
Nathan Binkert
80d5f34da6
stats: get rid of the convoluted 'database' code.
...
Just use the stuff directly and things ought to be more clear
2009-02-23 12:22:17 -08:00
Nathan Binkert
fb74987c52
stats: Try to make the names of things more intuitive.
...
Basically, this means renaming several things called data to info, which
is information about the statistics. Things that are named data now are
actual data stored for the statistic.
2009-02-23 12:22:15 -08:00
Nathan Binkert
bcb7e70178
stats: clean up the statistics unittest
2009-02-23 12:04:52 -08:00
Nathan Binkert
d940a2b741
stats: fix text printout for distributions
2009-02-23 12:04:50 -08:00
Nathan Binkert
f69ea20fc6
stats: cleanup static stats to make startup work.
...
This is mainly to allow the unit test to run without requiring the standard
M5 stats from being initialized (e.g. sim_seconds, sim_ticks, host_seconds)
2009-02-23 12:03:06 -08:00
Nathan Binkert
3fa9812e1d
debug: Move debug_break into src/base
2009-02-23 11:48:40 -08:00
Gabe Black
e8c1c3e72e
X86: Pass whether an access was a read/write/fetch so faults can behave accordingly.
2009-02-23 00:20:34 -08:00
Korey Sewell
6c5afe6346
Remove unnecessary building of FreeList/RenameMap in InOrder. Clean-up comments and O3 extensions InOrder Thread Context
2009-02-20 11:02:48 -05:00
Nathan Binkert
c41c9cf3a6
events: Make trace events happen at the right priority.
...
Also, while we're at it, remember that priorities are in the Event class
and add a disable method to disable tracing.
2009-02-18 10:00:15 -08:00
Steve Reinhardt
6cfff91d43
Make etherdump timestamps zero-based.
...
We previously used the actual wall time for the base timestamps,
making etherdumps non-deterministic. This fixes that problem and
gets rid of the "malformed packet" at the front that we needed to
provide the right base timestamp to wireshark/tcpdump.
2009-02-17 19:24:46 -08:00
Lisa Hsu
5d029ff11e
sycalls: implement mremap() and add DATA flag for getrlimit(). mremap has been tested on Alpha, compiles for the rest but not tested. I don't see why it wouldn't work though.
2009-02-16 17:47:39 -05:00
Steve Reinhardt
89ea323250
Update stats for new prefetching fixes.
...
Prefetching is not enabled in any of our regressions, so no significant
stat values have changed, but zero-valued prefetch stats no longer
show up when prefetching is disabled so there are noticable changes
in the reference stat files anyway.
2009-02-16 12:09:45 -05:00
Steve Reinhardt
89a7fb0393
Fixes to get prefetching working again.
...
Apparently we broke it with the cache rewrite and never noticed.
Thanks to Bao Yungang <baoyungang@gmail.com> for a significant part
of these changes (and for inspiring me to work on the rest).
Some other overdue cleanup on the prefetch code too.
2009-02-16 08:56:40 -08:00
Gabe Black
6923282fb5
X86: Make the loader recognize 32 bit x86 processes.
2009-02-15 23:43:39 -08:00
Nathan Binkert
e0f425bb94
traceflags: fix --trace-help
2009-02-15 20:39:12 -08:00
Nathan Binkert
de72083805
SCons: Fix read_command so it can properly deal with command strings
2009-02-15 20:38:49 -08:00
Nathan Binkert
312fbb1b48
scons: clean up the main SConstruct file more.
...
Add some features to read_command so it works a little bit better
Clean up the mercurial checks.
Filter the user environment and only pick out the useful stuff.
2009-02-11 16:58:51 -08:00
Nathan Binkert
f255957b90
style
2009-02-10 22:19:27 -08:00
Korey Sewell
cf4a00ca41
Configs: Add support for the InOrder CPU model
2009-02-10 15:49:29 -08:00
Korey Sewell
973d8b8b13
InOrder: Import new inorder CPU model from MIPS.
...
This model currently only works in MIPS_SE mode, so it will take some effort
to clean it up and make it generally useful. Hopefully people are willing to
help make that happen!
2009-02-10 15:49:29 -08:00
Korey Sewell
36d9065f5f
syscall: Expose ioctl for MIPS
2009-02-10 15:49:29 -08:00
Korey Sewell
34a5cd8870
ExeTrace: Allow subclasses of the tracer to define their own prefix to dump
2009-02-10 15:49:29 -08:00
Korey Sewell
2d0a66cbc1
CPU: Prepare CPU models for the new in-order CPU model.
...
Some new functions and forward declarations are necessary to make things work
2009-02-10 15:49:29 -08:00
Nathan Binkert
20c5ec6e1c
copyright: This file need not have had the more restrictive copyright.
2009-02-09 20:10:15 -08:00
Nathan Binkert
dd6ea8797f
scons: Require SCons version 0.98.1
...
This allows me to clean things up so we are up to date with respect to
deprecated features. There are many features scheduled for permanent failure
in scons 2.0 and 0.98.1 provides the most compatability for that. It
also paves the way for some nice new features that I will add soon
2009-02-09 20:10:14 -08:00
