Adjust the traffic generator time-out so that the script works out of
the box
Change-Id: I6b3b6b11f98b094ae3acdbe09488c26e4aeb0ab4
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
When loading a checkpoint, it's sometimes desirable to be able to test
whether an entry within a secion exists. This is currently done
automatically in the UNSERIALIZE_OPT_SCALAR macro, but it isn't
possible to do for arrays, containers, or enums. Instead of adding
even more macros, add a helper function (CheckpointIn::entryExists())
that tests for the presence of an entry.
Change-Id: I4b4646b03276b889fd3916efefff3bd552317dbc
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
The drain did not wait until stages were ready again. Therefore, as a
result of messages in the TimeBuffer being drain, the state after the
drain was not consistent and asserts fired in some places when the
draining happened after a stage got blocked, but before the notification
arrived to the previous stages.
Change-Id: Ib50b3b40b7f745b62c1eba2931dec76860824c71
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
The memtest and memcheck are not designed to test timing. Make them
functional only to make ref diffs less noisy in the future.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
The switcheroo tests only really serve to check functional
correctness. Checking for stat differences in them just increases the
size of reference diffs.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Align configuration with new SST change [1] requiring units for
memHierarchy's backend.mem_size parameter.
[1] c901abb4e7
Change-Id: I19fa09bec8aa453dc52d154598a4ebb20ea304d8
This patch adds methods to serialize the context of a particular wavefront
to the simulated system memory. Context serialization is used when a wavefront
is preempeted (i.e. context switch).
std::stack has no iterators, therefore the reconvergence stack can't be
iterated without poping elements off. We will be using std::list instead to be
able to iterate for saving and restoring purposes.
WFContext struct is currently unused and it has been rendered not useful in
saving and restoring the context of a Wavefront. Wavefront class should be
sufficient for that purpose and the runtime can figure out the memory size
it will need to allocate for a Wavefront through an IOCTL.
Switcheroo and checkpoint tests should generally be considered to be
successful if they run to completion. Remove all reference output
files from the switcheroo and checkopint tests to make them purely
functional.
Change-Id: I70b47853bd662b7a33716d9e0d2154b16077f9dc
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Modify the ClassicTest class to only emit a stat verification test
unit if there is a reference stat file. This makes it possible to
design tests that don't care about stat changes.
To generate purely functional tests, we need to be able to create
empty test reference directories. This does not work well with many
revision control systems. As a workaround, add a file named EMPTY to
the list of ignored files in the test harness. This file can be used
as a placeholder in otherwise empty test directories.
Change-Id: I583c8c4e55479f0d48fa99d0b0d1eac9221e6652
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
This change adds a Trace CPU param to exit simulation early,
i.e. when the first (any one) trace execution is complete. With
this change the user gets a choice to configure exit as either
when the last CPU finishes (default) or first CPU finishes
replay. Configuring an early exit enables simulating and
measuring stats strictly when memory-system resources are being
stressed by all Trace CPUs.
Change-Id: I3998045fdcc5cd343e1ca92d18dd7f7ecdba8f1d
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
This change subtracts the time offset present in the trace from
all the event times when nodes and request are sent so that the
replay starts immediately when the simulation starts. This makes
the stats accurate when the time offset in traces is large, for
example when traces are generated in the middle of a workload
execution. It also solves the problem of unnecessary DRAM
refresh events that would keep occuring during the large time
offset before even a single request is replayed into the system.
Change-Id: Ie0898842615def867ffd5c219948386d952af7f7
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
This change adds a simple feature to scale the frequency of
the Trace CPU.
The compute delays in the input traces provide timing. This
change adds a freqency multiplier parameter to the Trace CPU
set to 1.0 by default. The compute delay is manipulated to
effectively achieve the frequency at which the nodes become
ready and thus scale the frequency of the Trace CPU.
Change-Id: Iaabbd57806941ad56094fcddbeb38fcee1172431
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
This patch refactors the configuration file to use a more
object-oriented design.
Change-Id: I44ac2d063c2b5901f385544fb6ce3f259459cb05
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com>
This patch enables timing accesses for KVM cpu. A new state,
RunningMMIOPending, is added to indicate that there are outstanding timing
requests generated by KVM in the system. KVM's tick() is disabled and the
simulation does not enter into KVM until all outstanding timing requests have
completed. The main motivation for this is to allow KVM CPU to perform MMIO
in Ruby, since Ruby does not support atomic accesses.
Normal MMAPPED_IPR requests are allowed to execute speculatively under the
assumption that they have no side effects. The special case of m5ops that are
treated like MMAPPED_IPR should not be allowed to execute speculatively, since
they can have side-effects. Adding the STRICT_ORDER flag to these requests
blocks execution until the associated instruction hits the ROB head.
The quiesce family of magic ops can be simplified by the inclusion of
quiesceTick() and quiesce() functions on ThreadContext. This patch also
gets rid of the FS guards, since suspending a CPU is also a valid
operation for SE mode.
This patch introduces the DmaCallback helper class, which registers a callback
to fire after a sequence of (potentially non-contiguous) DMA transfers on a
DmaPort completes.
Connecting basic blocks would stop too early in kernels where ret was not the
last instruction. This patch allows basic blocks after the ret instruction
to be properly connected.
The receiver thread in dist_iface is allowed to directly exit the simulation.
This can cause exit to be called twice if the main thread simultaneously wants
to exit the simulation. Therefore, have the receiver thread enqueue a request
to exit on the primary event queue for the main simulation thread to handle.
Ethernet devices are currently only hooked up if running in FS mode. Much of
the Ethernet networking code is generic and can be used to build non-Ethernet
device models. Some of these device models do not require a complex driver
stack and can be built to use an EmulatedDriver in SE mode. This patch enables
etherent interfaces to properly connect regardless of whether the simulation
is in FS or SE mode.
Currently only 'start' and 'end' of AddrRange are printed in config.ini.
This causes address ranges to be overlapping when loading a c++-only
config with interleaved addresses using CxxConfigManger. This patch adds
prints for the interleave and XOR bits to config.ini such that address
ranges are properly setup with cxx config.
Add a customizable NoMali GPU model and an example Mali T760
configuration. Unlike the normal NoMali model (NoMaliGpu), the
NoMaliCustopmGpu model exposes all the important GPU ID registers to
Python. This makes it possible to implement custom GPU configurations
by without changing the underlying NoMali library.
Change-Id: I4fdba05844c3589893aa1a4c11dc376ec33d4e9e
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Add support for using KVM to accelerate APU simulations. The intended use
case is to fast-forward through runtime initialization until the first
kernel launch.
Only map memories into the KVM guest address space that are
marked as usable by KVM. Create BackingStoreEntry class
containing flags for is_conf_reported, in_addr_map, and
kvm_map.
This changeset reverts the changset "dev, sim: Added missing override
keywords to fix CLANG compilation (OSX)" which was incorrectly rebased.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Previously printing an mshr would trigger an assertion if the MSHR was
not in service or if the targets list was empty. This patch changes
the print function to bypasses the accessor functions for
postInvalidate and postDowngrade and avoid the relevant assertions. It
also checks if the targets list is empty before calling print on it.
Change-Id: Ic18bee6cb088f63976112eba40e89501237cfe62
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
An email sent to gem5-users and gem5-dev asking if anyone was
still using EIO traces got no responses, so it seems like it's
not worth maintaining this any longer.
