Commit graph

107 commits

Author SHA1 Message Date
Akash Bagdia
1c34ee20df power: Low-power idle power state for idle CPUs
Add functionality to the BaseCPU that will put the entire CPU into a low-power
idle state whenever all threads in it are idle.
2014-12-09 10:42:08 +00:00
Geoffrey Blake
f948f9fca9 cpu: Query CPU for inst executed from Python
This patch adds the ability for the simulator to query the number of
instructions a CPU has executed so far per hw-thread. This can be used
to enable more flexible periodic events such as taking checkpoints
starting 1s into simulation and X instructions thereafter.
2016-04-05 05:29:02 -05:00
Andreas Hansson
2ac04c11ac misc: Add explicit overrides and fix other clang >= 3.5 issues
This patch adds explicit overrides as this is now required when using
"-Wall" with clang >= 3.5, the latter now part of the most recent
XCode. The patch consequently removes "virtual" for those methods
where "override" is added. The latter should be enough of an
indication.

As part of this patch, a few minor issues that clang >= 3.5 complains
about are also resolved (unused methods and variables).
2015-10-12 04:08:01 -04:00
Andreas Hansson
22c04190c6 misc: Remove redundant compiler-specific defines
This patch moves away from using M5_ATTR_OVERRIDE and the m5::hashmap
(and similar) abstractions, as these are no longer needed with gcc 4.7
and clang 3.1 as minimum compiler versions.
2015-10-12 04:07:59 -04:00
Mitch Hayenga
9e07a7504c cpu,isa,mem: Add per-thread wakeup logic
Changes wakeup functionality so that only specific threads on SMT
capable cpus are woken.
2015-09-30 11:14:19 -05:00
Mitch Hayenga
a5c4eb3de9 isa,cpu: Add support for FS SMT Interrupts
Adds per-thread interrupt controllers and thread/context logic
so that interrupts properly get routed in SMT systems.
2015-09-30 11:14:19 -05:00
Mitch Hayenga
fafa83ed32 cpu: Add per-thread monitors
Adds per-thread address monitors to support FullSystem SMT.
2015-09-30 11:14:19 -05:00
Andreas Hansson
ae06e9a5c6 cpu: Move invldPid constant from Request to BaseCPU
A more natural home for this constant.
2015-08-21 07:03:14 -04:00
Andreas Sandberg
76cd4393c0 sim: Refactor the serialization base class
Objects that are can be serialized are supposed to inherit from the
Serializable class. This class is meant to provide a unified API for
such objects. However, so far it has mainly been used by SimObjects
due to some fundamental design limitations. This changeset redesigns
to the serialization interface to make it more generic and hide the
underlying checkpoint storage. Specifically:

  * Add a set of APIs to serialize into a subsection of the current
    object. Previously, objects that needed this functionality would
    use ad-hoc solutions using nameOut() and section name
    generation. In the new world, an object that implements the
    interface has the methods serializeSection() and
    unserializeSection() that serialize into a named /subsection/ of
    the current object. Calling serialize() serializes an object into
    the current section.

  * Move the name() method from Serializable to SimObject as it is no
    longer needed for serialization. The fully qualified section name
    is generated by the main serialization code on the fly as objects
    serialize sub-objects.

  * Add a scoped ScopedCheckpointSection helper class. Some objects
    need to serialize data structures, that are not deriving from
    Serializable, into subsections. Previously, this was done using
    nameOut() and manual section name generation. To simplify this,
    this changeset introduces a ScopedCheckpointSection() helper
    class. When this class is instantiated, it adds a new /subsection/
    and subsequent serialization calls during the lifetime of this
    helper class happen inside this section (or a subsection in case
    of nested sections).

  * The serialize() call is now const which prevents accidental state
    manipulation during serialization. Objects that rely on modifying
    state can use the serializeOld() call instead. The default
    implementation simply calls serialize(). Note: The old-style calls
    need to be explicitly called using the
    serializeOld()/serializeSectionOld() style APIs. These are used by
    default when serializing SimObjects.

  * Both the input and output checkpoints now use their own named
    types. This hides underlying checkpoint implementation from
    objects that need checkpointing and makes it easier to change the
    underlying checkpoint storage code.
2015-07-07 09:51:03 +01:00
Ali Saidi
6c4a23c1c6 cpu: remove legion tracer
If someone wants to debug with legion again they can restore the
code from the repository, but no need to have it hang around indefinately.
2015-01-25 07:22:05 -05:00
Marc Orr
bf80734b2c x86 isa: This patch attempts an implementation at mwait.
Mwait works as follows:
1. A cpu monitors an address of interest (monitor instruction)
2. A cpu calls mwait - this loads the cache line into that cpu's cache.
3. The cpu goes to sleep.
4. When another processor requests write permission for the line, it is
   evicted from the sleeping cpu's cache. This eviction is forwarded to the
   sleeping cpu, which then wakes up.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-11-06 05:42:22 -06:00
Andreas Sandberg
e0074324ba cpu: Probe points for basic PMU stats
This changeset adds probe points that can be used to implement PMU
counters for CPU stats. The following probes are supported:

  * BaseCPU::ppCycles / Cycles
  * BaseCPU::ppRetiredInsts / RetiredInsts
  * BaseCPU::ppRetiredLoads / RetiredLoads
  * BaseCPU::ppRetiredStores / RetiredStores
  * BaseCPU::ppRetiredBranches RetiredBranches
2014-10-16 05:49:41 -04:00
Mitch Hayenga
cc6523e2d6 cpu: Remove unused deallocateContext calls
The call paths for de-scheduling a thread are halt() and suspend(), from
the thread context. There is no call to deallocateContext() in general,
though some CPUs chose to define it. This patch removes the function
from BaseCPU and the cores which do not require it.
2014-09-20 17:18:36 -04:00
Mitch Hayenga
e1403fc2af alpha,arm,mips,power,x86,cpu,sim: Cleanup activate/deactivate
activate(), suspend(), and halt() used on thread contexts had an optional
delay parameter. However this parameter was often ignored. Also, when used,
the delay was seemily arbitrarily set to 0 or 1 cycle (no other delays were
ever specified). This patch removes the delay parameter and 'Events'
associated with them across all ISAs and cores. Unused activate logic
is also removed.
2014-09-20 17:18:35 -04:00
Akash Bagdia
2b1a01ee6c cpu, arm: Allow the specification of a socket field
Allow the specification of a socket ID for every core that is reflected in the
MPIDR field in ARM systems.  This allows studying multi-socket / cluster
systems with ARM CPUs.
2014-05-09 18:58:46 -04:00
Andreas Hansson
62fe81e9c1 cpu: Make CPU and ThreadContext getters const
This patch merely tidies up the CPU and ThreadContext getters by
making them const where appropriate.
2014-03-07 15:56:23 -05:00
Ali Saidi
6bed6e0352 cpu: Add CPU support for generatig wake up events when LLSC adresses are snooped.
This patch add support for generating wake-up events in the CPU when an address
that is currently in the exclusive state is hit by a snoop. This mechanism is required
for ARMv8 multi-processor support.
2014-01-24 15:29:30 -06:00
Andreas Hansson
19a5b68db7 arch: Resurrect the NOISA build target and rename it NULL
This patch makes it possible to once again build gem5 without any
ISA. The main purpose is to enable work around the interconnect and
memory system without having to build any CPU models or device models.

The regress script is updated to include the NULL ISA target. Currently
no regressions make use of it, but all the testers could (and perhaps
should) transition to it.

--HG--
rename : build_opts/NOISA => build_opts/NULL
rename : src/arch/noisa/SConsopts => src/arch/null/SConsopts
rename : src/arch/noisa/cpu_dummy.hh => src/arch/null/cpu_dummy.hh
rename : src/cpu/intr_control.cc => src/cpu/intr_control_noisa.cc
2013-09-04 13:22:57 -04:00
Andreas Sandberg
b5bb2a25aa cpu: Remove unused getBranchPred() method from BaseCPU
Remove unused virtual getBranchPred() method from BaseCPU as it is not
implemented by any of the CPU models. It used to always return NULL.
2013-07-19 11:52:07 +02:00
Andreas Hansson
d4273cc9a6 mem: Set the cache line size on a system level
This patch removes the notion of a peer block size and instead sets
the cache line size on the system level.

Previously the size was set per cache, and communicated through the
interconnect. There were plenty checks to ensure that everyone had the
same size specified, and these checks are now removed. Another benefit
that is not yet harnessed is that the cache line size is now known at
construction time, rather than after the port binding. Hence, the
block size can be locally stored and does not have to be queried every
time it is used.

A follow-on patch updates the configuration scripts accordingly.
2013-07-18 08:31:16 -04:00
Andreas Sandberg
0793d0727b cpu: Add support for scheduling multiple inst/load stop events
Currently, the only way to get a CPU to stop after a fixed number of
instructions/loads is to set a property on the CPU that causes a
SimLoopExitEvent to be scheduled when the CPU is constructed. This is
clearly not ideal in cases where the simulation script wants the CPU
to stop at multiple instruction counts (e.g., SimPoint generation).

This changeset adds the methods scheduleInstStop() and
scheduleLoadStop() to the BaseCPU. These methods are exported to
Python and are designed to be used from the simulation script. By
using these methods instead of the old properties, a simulation script
can schedule a stop at any point during simulation or schedule
multiple stops. The number of instructions specified when scheduling a
stop is relative to the current point of execution.
2013-06-11 09:18:25 +02:00
Andreas Sandberg
2607efded8 kvm: Avoid synchronizing the TC on every KVM exit
Reduce the number of KVM->TC synchronizations by overloading the
getContext() method and only request an update when the TC is
requested as opposed to every time KVM returns to gem5.
2013-04-22 13:20:32 -04:00
Andreas Hansson
08c1835bef cpu: Remove CpuPort and use MasterPort in the CPU classes
This patch changes the port in the CPU classes to use MasterPort
instead of the derived CpuPort. The functions of the CpuPort are now
distributed across the relevant subclasses. The port accessor
functions (getInstPort and getDataPort) now return a MasterPort
instead of a CpuPort. This simplifies creating derivative CPUs that do
not use the CpuPort.
2013-03-26 14:46:42 -04:00
Andreas Sandberg
1eec115c31 cpu: Refactor memory system checks
CPUs need to test that the memory system is in the right mode in two
places, when the CPU is initialized (unless it's switched out) and on
a drainResume(). This led to some code duplication in the CPU
models. This changeset introduces the verifyMemoryMode() method which
is called by BaseCPU::init() if the CPU isn't switched out. The
individual CPU models are responsible for calling this method when
resuming from a drain as this code is CPU model specific.
2013-02-15 17:40:08 -05:00
Andreas Sandberg
009970f59b cpu: Unify the serialization code for all of the CPU models
Cleanup the serialization code for the simple CPUs and the O3 CPU. The
CPU-specific code has been replaced with a (un)serializeThread that
serializes the thread state / context of a specific thread. Assuming
that the thread state class uses the CPU-specific thread state uses
the base thread state serialization code, this allows us to restore a
checkpoint with any of the CPU models.
2013-01-07 13:05:52 -05:00
Andreas Sandberg
e09e9fa279 cpu: Flush TLBs on switchOut()
This changeset inserts a TLB flush in BaseCPU::switchOut to prevent
stale translations when doing repeated switching. Additionally, the
TLB flushing functionality is exported to the Python to make debugging
of switching/checkpointing easier.

A simulation script will typically use the TLB flushing functionality
to generate a reference trace. The following sequence can be used to
simulate a handover (this depends on how drain is implemented, but is
generally the case) between identically configured CPU models:

  m5.drain(test_sys)
  [ cpu.flushTLBs() for cpu in test_sys.cpu ]
  m5.resume(test_sys)

The generated trace should normally be identical to a trace generated
when switching between identically configured CPU models or
checkpointing and resuming.
2013-01-07 13:05:48 -05:00
Andreas Sandberg
a7e0cbeb36 cpu: Introduce sanity checks when switching between CPUs
This patch introduces the following sanity checks when switching
between CPUs:

 * Check that the set of new and old CPUs do not overlap. Having an
   overlap between the set of new CPUs and the set of old CPUs is
   currently not supported. Doing such a switch used to result in the
   following assertion error:
     BaseCPU::takeOverFrom(BaseCPU*): \
       Assertion `!new_itb_port->isConnected()' failed.

 * Check that all new CPUs are in the switched out state.

 * Check that all old CPUs are in the switched in state.
2013-01-07 13:05:44 -05:00
Dam Sunwoo
81406018b0 ARM: dump stats and process info on context switches
This patch enables dumping statistics and Linux process information on
context switch boundaries (__switch_to() calls) that are used for
Streamline integration (a graphical statistics viewer from ARM).
2012-11-02 11:32:01 -05:00
Andreas Hansson
2a740aa096 Port: Add protocol-agnostic ports in the port hierarchy
This patch adds an additional level of ports in the inheritance
hierarchy, separating out the protocol-specific and protocl-agnostic
parts. All the functionality related to the binding of ports is now
confined to use BaseMaster/BaseSlavePorts, and all the
protocol-specific parts stay in the Master/SlavePort. In the future it
will be possible to add other protocol-specific implementations.

The functions used in the binding of ports, i.e. getMaster/SlavePort
now use the base classes, and the index parameter is updated to use
the PortID typedef with the symbolic InvalidPortID as the default.
2012-10-15 08:12:35 -04:00
Andreas Sandberg
6598241f2c sim: Move CPU-specific methods from SimObject to the BaseCPU class 2012-09-25 11:49:40 -05:00
Andreas Hansson
0cacf7e817 Clock: Add a Cycles wrapper class and use where applicable
This patch addresses the comments and feedback on the preceding patch
that reworks the clocks and now more clearly shows where cycles
(relative cycle counts) are used to express time.

Instead of bumping the existing patch I chose to make this a separate
patch, merely to try and focus the discussion around a smaller set of
changes. The two patches will be pushed together though.

This changes done as part of this patch are mostly following directly
from the introduction of the wrapper class, and change enough code to
make things compile and run again. There are definitely more places
where int/uint/Tick is still used to represent cycles, and it will
take some time to chase them all down. Similarly, a lot of parameters
should be changed from Param.Tick and Param.Unsigned to
Param.Cycles.

In addition, the use of curTick is questionable as there should not be
an absolute cycle. Potential solutions can be built on top of this
patch. There is a similar situation in the o3 CPU where
lastRunningCycle is currently counting in Cycles, and is still an
absolute time. More discussion to be had in other words.

An additional change that would be appropriate in the future is to
perform a similar wrapping of Tick and probably also introduce a
Ticks class along with suitable operators for all these classes.
2012-08-28 14:30:33 -04:00
Andreas Hansson
452217817f Clock: Move the clock and related functions to ClockedObject
This patch moves the clock of the CPU, bus, and numerous devices to
the new class ClockedObject, that sits in between the SimObject and
MemObject in the class hierarchy. Although there are currently a fair
amount of MemObjects that do not make use of the clock, they
potentially should do so, e.g. the caches should at some point have
the same clock as the CPU, potentially with a 1:n ratio. This patch
does not introduce any new clock objects or object hierarchies
(clusters, clock domains etc), but is still a step in the direction of
having a more structured approach clock domains.

The most contentious part of this patch is the serialisation of clocks
that some of the modules (but not all) did previously. This
serialisation should not be needed as the clock is set through the
parameters even when restoring from the checkpoint. In other words,
the state is "stored" in the Python code that creates the modules.

The nextCycle methods are also simplified and the clock phase
parameter of the CPU is removed (this could be part of a clock object
once they are introduced).
2012-08-21 05:49:01 -04:00
Gabe Black
0cba96ba6a CPU: Merge the predecoder and decoder.
These classes are always used together, and merging them will give the ISAs
more flexibility in how they cache things and manage the process.

--HG--
rename : src/arch/x86/predecoder_tables.cc => src/arch/x86/decoder_tables.cc
2012-05-26 13:44:46 -07:00
Andreas Hansson
3fea59e162 MEM: Separate requests and responses for timing accesses
This patch moves send/recvTiming and send/recvTimingSnoop from the
Port base class to the MasterPort and SlavePort, and also splits them
into separate member functions for requests and responses:
send/recvTimingReq, send/recvTimingResp, and send/recvTimingSnoopReq,
send/recvTimingSnoopResp. A master port sends requests and receives
responses, and also receives snoop requests and sends snoop
responses. A slave port has the reciprocal behaviour as it receives
requests and sends responses, and sends snoop requests and receives
snoop responses.

For all MemObjects that have only master ports or slave ports (but not
both), e.g. a CPU, or a PIO device, this patch merely adds more
clarity to what kind of access is taking place. For example, a CPU
port used to call sendTiming, and will now call
sendTimingReq. Similarly, a response previously came back through
recvTiming, which is now recvTimingResp. For the modules that have
both master and slave ports, e.g. the bus, the behaviour was
previously relying on branches based on pkt->isRequest(), and this is
now replaced with a direct call to the apprioriate member function
depending on the type of access. Please note that send/recvRetry is
still shared by all the timing accessors and remains in the Port base
class for now (to maintain the current bus functionality and avoid
changing the statistics of all regressions).

The packet queue is split into a MasterPort and SlavePort version to
facilitate the use of the new timing accessors. All uses of the
PacketQueue are updated accordingly.

With this patch, the type of packet (request or response) is now well
defined for each type of access, and asserts on pkt->isRequest() and
pkt->isResponse() are now moved to the appropriate send member
functions. It is also worth noting that sendTimingSnoopReq no longer
returns a boolean, as the semantics do not alow snoop requests to be
rejected or stalled. All these assumptions are now excplicitly part of
the port interface itself.
2012-05-01 13:40:42 -04:00
Andreas Hansson
dccca0d3a9 MEM: Separate snoops and normal memory requests/responses
This patch introduces port access methods that separates snoop
request/responses from normal memory request/responses. The
differentiation is made for functional, atomic and timing accesses and
builds on the introduction of master and slave ports.

Before the introduction of this patch, the packets belonging to the
different phases of the protocol (request -> [forwarded snoop request
-> snoop response]* -> response) all use the same port access
functions, even though the snoop packets flow in the opposite
direction to the normal packet. That is, a coherent master sends
normal request and receives responses, but receives snoop requests and
sends snoop responses (vice versa for the slave). These two distinct
phases now use different access functions, as described below.

Starting with the functional access, a master sends a request to a
slave through sendFunctional, and the request packet is turned into a
response before the call returns. In a system without cache coherence,
this is all that is needed from the functional interface. For the
cache-coherent scenario, a slave also sends snoop requests to coherent
masters through sendFunctionalSnoop, with responses returned within
the same packet pointer. This is currently used by the bus and caches,
and the LSQ of the O3 CPU. The send/recvFunctional and
send/recvFunctionalSnoop are moved from the Port super class to the
appropriate subclass.

Atomic accesses follow the same flow as functional accesses, with
request being sent from master to slave through sendAtomic. In the
case of cache-coherent ports, a slave can send snoop requests to a
master through sendAtomicSnoop. Just as for the functional access
methods, the atomic send and receive member functions are moved to the
appropriate subclasses.

The timing access methods are different from the functional and atomic
in that requests and responses are separated in time and
send/recvTiming are used for both directions. Hence, a master uses
sendTiming to send a request to a slave, and a slave uses sendTiming
to send a response back to a master, at a later point in time. Snoop
requests and responses travel in the opposite direction, similar to
what happens in functional and atomic accesses. With the introduction
of this patch, it is possible to determine the direction of packets in
the bus, and no longer necessary to look for both a master and a slave
port with the requested port id.

In contrast to the normal recvFunctional, recvAtomic and recvTiming
that are pure virtual functions, the recvFunctionalSnoop,
recvAtomicSnoop and recvTimingSnoop have a default implementation that
calls panic. This is to allow non-coherent master and slave ports to
not implement these functions.
2012-04-14 05:45:07 -04:00
Andreas Hansson
a8e6adb0b1 Atomic: Remove the physmem_port and access memory directly
This patch removes the physmem_port from the Atomic CPU and instead
uses the system pointer to access the physmem when using the fastmem
option. The system already keeps track of the physmem and the valid
memory address ranges, and with this patch we merely make use of that
existing functionality. As a result of this change, the overloaded
getMasterPort in the Atomic CPU can be removed, thus unifying the CPUs.
2012-04-03 03:50:14 -04:00
William Wang
f9d403a7b9 MEM: Introduce the master/slave port sub-classes in C++
This patch introduces the notion of a master and slave port in the C++
code, thus bringing the previous classification from the Python
classes into the corresponding simulation objects and memory objects.

The patch enables us to classify behaviours into the two bins and add
assumptions and enfore compliance, also simplifying the two
interfaces. As a starting point, isSnooping is confined to a master
port, and getAddrRanges to slave ports. More of these specilisations
are to come in later patches.

The getPort function is not getMasterPort and getSlavePort, and
returns a port reference rather than a pointer as NULL would never be
a valid return value. The default implementation of these two
functions is placed in MemObject, and calls fatal.

The one drawback with this specific patch is that it requires some
code duplication, e.g. QueuedPort becomes QueuedMasterPort and
QueuedSlavePort, and BusPort becomes BusMasterPort and BusSlavePort
(avoiding multiple inheritance). With the later introduction of the
port interfaces, moving the functionality outside the port itself, a
lot of the duplicated code will disappear again.
2012-03-30 09:40:11 -04:00
Andreas Hansson
adb8621031 clang: Fix recently introduced clang compilation errors
This patch makes the code compile with clang 2.9 and 3.0 again by
making two very minor changes. Firt, it maintains a strict typing in
the forward declaration of the BaseCPUParams. Second, it adds a
FullSystemInt flag of the type unsigned int next to the boolean
FullSystem flag. The FullSystemInt variable can be used in
decode-statements (expands to switch statements) in the instruction
decoder.
2012-03-19 06:35:04 -04:00
Andreas Hansson
32eae8094d CPU: Check that the interrupt controller is created when needed
This patch adds a creation-time check to the CPU to ensure that the
interrupt controller is created for the cases where it is needed,
i.e. if the CPU is not being switched in later and not a checker CPU.

The patch also adds the "createInterruptController" call to a number
of the regression scripts.
2012-03-02 09:21:48 -05:00
Andreas Hansson
9f07d2ce7e CPU: Round-two unifying instr/data CPU ports across models
This patch continues the unification of how the different CPU models
create and share their instruction and data ports. Most importantly,
it forces every CPU to have an instruction and a data port, and gives
these ports explicit getters in the BaseCPU (getDataPort and
getInstPort). The patch helps in simplifying the code, make
assumptions more explicit, andfurther ease future patches related to
the CPU ports.

The biggest changes are in the in-order model (that was not modified
in the previous unification patch), which now moves the ports from the
CacheUnit to the CPU. It also distinguishes the instruction fetch and
load-store unit from the rest of the resources, and avoids the use of
indices and casting in favour of keeping track of these two units
explicitly (since they are always there anyways). The atomic, timing
and O3 model simply return references to their already existing ports.
2012-02-24 11:42:00 -05:00
Anthony Gutierrez
542d0ceebc cpu: add separate stats for insts/ops both globally and per cpu model 2012-02-12 16:07:39 -06:00
Ali Saidi
8aaa39e93d mem: Add a master ID to each request object.
This change adds a master id to each request object which can be
used identify every device in the system that is capable of issuing a request.
This is part of the way to removing the numCpus+1 stats in the cache and
replacing them with the master ids. This is one of a series of changes
that make way for the stats output to be changed to python.
2012-02-12 16:07:38 -06:00
Gabe Black
ea8b347dc5 Merge with head, hopefully the last time for this batch. 2012-01-31 22:40:08 -08:00
Koan-Sin Tan
7d4f187700 clang: Enable compiling gem5 using clang 2.9 and 3.0
This patch adds the necessary flags to the SConstruct and SConscript
files for compiling using clang 2.9 and later (on Ubuntu et al and OSX
XCode 4.2), and also cleans up a bunch of compiler warnings found by
clang. Most of the warnings are related to hidden virtual functions,
comparisons with unsigneds >= 0, and if-statements with empty
bodies. A number of mismatches between struct and class are also
fixed. clang 2.8 is not working as it has problems with class names
that occur in multiple namespaces (e.g. Statistics in
kernel_stats.hh).

clang has a bug (http://llvm.org/bugs/show_bug.cgi?id=7247) which
causes confusion between the container std::set and the function
Packet::set, and this is currently addressed by not including the
entire namespace std, but rather selecting e.g. "using std::vector" in
the appropriate places.
2012-01-31 12:05:52 -05:00
Gabe Black
c3d41a2def Merge with the main repo.
--HG--
rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh
rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc
rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-28 07:24:01 -08:00
Gabe Black
da2a4acc26 Merge yet again with the main repository. 2012-01-16 04:27:10 -08:00
Andreas Hansson
07cf9d914b MEM: Separate queries for snooping and address ranges
This patch simplifies the address-range determination mechanism and
also unifies the naming across ports and devices. It further splits
the queries for determining if a port is snooping and what address
ranges it responds to (aiming towards a separation of
cache-maintenance ports and pure memory-mapped ports). Default
behaviours are such that most ports do not have to define isSnooping,
and master ports need not implement getAddrRanges.
2012-01-17 12:55:09 -06:00
Andreas Hansson
b3f930c884 CPU: Moving towards a more general port across CPU models
This patch performs minimal changes to move the instruction and data
ports from specialised subclasses to the base CPU (to the largest
degree possible). Ultimately it servers to make the CPU(s) have a
well-defined interface to the memory sub-system.
2012-01-17 12:55:08 -06:00
Ali Saidi
d2c26f402c O3: Add support of function tracing with O3 CPU. 2012-01-09 18:08:20 -06:00
Gabe Black
85424bef19 SE/FS: Get rid of includes of config/full_system.hh. 2011-11-18 02:20:22 -08:00