sanchayanmaity/gem5
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
gem5/tests/quick/fs/10.linux-boot/ref/x86/linux/pc-simple-atomic/stats.txt

579 lines
66 KiB
Text
Raw Normal View History

X86: Add stats for the new x86 fs regressions.
2011-02-07 10:23:16 +01:00
---------- Begin Simulation Statistics ----------
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
sim_seconds 5.112102 # Number of seconds simulated
sim_ticks 5112102211000 # Number of ticks simulated
final_tick 5112102211000 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
X86: Add stats for the new x86 fs regressions.
2011-02-07 10:23:16 +01:00
sim_freq 1000000000000 # Frequency of simulated ticks
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
host_inst_rate 878832 # Simulator instruction rate (inst/s)
host_op_rate 1799374 # Simulator op (including micro ops) rate (op/s)
host_tick_rate 22473674513 # Simulator tick rate (ticks/s)
host_mem_usage 586256 # Number of bytes of host memory used
host_seconds 227.47 # Real time elapsed on the host
sim_insts 199908396 # Number of instructions simulated
sim_ops 409304707 # Number of ops (including micro ops) simulated
system.physmem.bytes_read::pc.south_bridge.ide 2421056 # Number of bytes read from this memory
Stats: Update stats for RAS and LRU fixes.
2012-06-29 17:19:03 +02:00
system.physmem.bytes_read::cpu.dtb.walker 128 # Number of bytes read from this memory
system.physmem.bytes_read::cpu.itb.walker 320 # Number of bytes read from this memory
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.physmem.bytes_read::cpu.inst 852736 # Number of bytes read from this memory
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.physmem.bytes_read::cpu.data 10605120 # Number of bytes read from this memory
system.physmem.bytes_read::total 13879360 # Number of bytes read from this memory
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.physmem.bytes_inst_read::cpu.inst 852736 # Number of instructions bytes read from this memory
system.physmem.bytes_inst_read::total 852736 # Number of instructions bytes read from this memory
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.physmem.bytes_written::writebacks 9264512 # Number of bytes written to this memory
system.physmem.bytes_written::total 9264512 # Number of bytes written to this memory
system.physmem.num_reads::pc.south_bridge.ide 37829 # Number of read requests responded to by this memory
Stats: Update stats for RAS and LRU fixes.
2012-06-29 17:19:03 +02:00
system.physmem.num_reads::cpu.dtb.walker 2 # Number of read requests responded to by this memory
system.physmem.num_reads::cpu.itb.walker 5 # Number of read requests responded to by this memory
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.physmem.num_reads::cpu.inst 13324 # Number of read requests responded to by this memory
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.physmem.num_reads::cpu.data 165705 # Number of read requests responded to by this memory
system.physmem.num_reads::total 216865 # Number of read requests responded to by this memory
system.physmem.num_writes::writebacks 144758 # Number of write requests responded to by this memory
system.physmem.num_writes::total 144758 # Number of write requests responded to by this memory
system.physmem.bw_read::pc.south_bridge.ide 473593 # Total read bandwidth from this memory (bytes/s)
Stats: Update stats for RAS and LRU fixes.
2012-06-29 17:19:03 +02:00
system.physmem.bw_read::cpu.dtb.walker 25 # Total read bandwidth from this memory (bytes/s)
system.physmem.bw_read::cpu.itb.walker 63 # Total read bandwidth from this memory (bytes/s)
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.physmem.bw_read::cpu.inst 166807 # Total read bandwidth from this memory (bytes/s)
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.physmem.bw_read::cpu.data 2074513 # Total read bandwidth from this memory (bytes/s)
system.physmem.bw_read::total 2715000 # Total read bandwidth from this memory (bytes/s)
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.physmem.bw_inst_read::cpu.inst 166807 # Instruction read bandwidth from this memory (bytes/s)
system.physmem.bw_inst_read::total 166807 # Instruction read bandwidth from this memory (bytes/s)
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.physmem.bw_write::writebacks 1812270 # Write bandwidth from this memory (bytes/s)
system.physmem.bw_write::total 1812270 # Write bandwidth from this memory (bytes/s)
system.physmem.bw_total::writebacks 1812270 # Total bandwidth to/from this memory (bytes/s)
system.physmem.bw_total::pc.south_bridge.ide 473593 # Total bandwidth to/from this memory (bytes/s)
Stats: Update stats for RAS and LRU fixes.
2012-06-29 17:19:03 +02:00
system.physmem.bw_total::cpu.dtb.walker 25 # Total bandwidth to/from this memory (bytes/s)
system.physmem.bw_total::cpu.itb.walker 63 # Total bandwidth to/from this memory (bytes/s)
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.physmem.bw_total::cpu.inst 166807 # Total bandwidth to/from this memory (bytes/s)
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.physmem.bw_total::cpu.data 2074513 # Total bandwidth to/from this memory (bytes/s)
system.physmem.bw_total::total 4527271 # Total bandwidth to/from this memory (bytes/s)
stats: Update stats to reflect use of SimpleDRAM This patch bumps the stats to match the use of SimpleDRAM instead of SimpleMemory in all inorder and O3 regressions, and also all full-system regressions. A number of performance-related stats change, and a whole bunch of stats are added for the memory controller.
2012-10-25 19:14:42 +02:00
system.physmem.readReqs 0 # Total number of read requests seen
system.physmem.writeReqs 0 # Total number of write requests seen
system.physmem.cpureqs 0 # Reqs generatd by CPU via cache - shady
system.physmem.bytesRead 0 # Total number of bytes read from memory
system.physmem.bytesWritten 0 # Total number of bytes written to memory
system.physmem.bytesConsumedRd 0 # bytesRead derated as per pkt->getSize()
system.physmem.bytesConsumedWr 0 # bytesWritten derated as per pkt->getSize()
system.physmem.servicedByWrQ 0 # Number of read reqs serviced by write Q
system.physmem.neitherReadNorWrite 0 # Reqs where no action is needed
system.physmem.perBankRdReqs::0 0 # Track reads on a per bank basis
system.physmem.perBankRdReqs::1 0 # Track reads on a per bank basis
system.physmem.perBankRdReqs::2 0 # Track reads on a per bank basis
system.physmem.perBankRdReqs::3 0 # Track reads on a per bank basis
system.physmem.perBankRdReqs::4 0 # Track reads on a per bank basis
system.physmem.perBankRdReqs::5 0 # Track reads on a per bank basis
system.physmem.perBankRdReqs::6 0 # Track reads on a per bank basis
system.physmem.perBankRdReqs::7 0 # Track reads on a per bank basis
system.physmem.perBankRdReqs::8 0 # Track reads on a per bank basis
system.physmem.perBankRdReqs::9 0 # Track reads on a per bank basis
system.physmem.perBankRdReqs::10 0 # Track reads on a per bank basis
system.physmem.perBankRdReqs::11 0 # Track reads on a per bank basis
system.physmem.perBankRdReqs::12 0 # Track reads on a per bank basis
system.physmem.perBankRdReqs::13 0 # Track reads on a per bank basis
system.physmem.perBankRdReqs::14 0 # Track reads on a per bank basis
system.physmem.perBankRdReqs::15 0 # Track reads on a per bank basis
system.physmem.perBankWrReqs::0 0 # Track writes on a per bank basis
system.physmem.perBankWrReqs::1 0 # Track writes on a per bank basis
system.physmem.perBankWrReqs::2 0 # Track writes on a per bank basis
system.physmem.perBankWrReqs::3 0 # Track writes on a per bank basis
system.physmem.perBankWrReqs::4 0 # Track writes on a per bank basis
system.physmem.perBankWrReqs::5 0 # Track writes on a per bank basis
system.physmem.perBankWrReqs::6 0 # Track writes on a per bank basis
system.physmem.perBankWrReqs::7 0 # Track writes on a per bank basis
system.physmem.perBankWrReqs::8 0 # Track writes on a per bank basis
system.physmem.perBankWrReqs::9 0 # Track writes on a per bank basis
system.physmem.perBankWrReqs::10 0 # Track writes on a per bank basis
system.physmem.perBankWrReqs::11 0 # Track writes on a per bank basis
system.physmem.perBankWrReqs::12 0 # Track writes on a per bank basis
system.physmem.perBankWrReqs::13 0 # Track writes on a per bank basis
system.physmem.perBankWrReqs::14 0 # Track writes on a per bank basis
system.physmem.perBankWrReqs::15 0 # Track writes on a per bank basis
system.physmem.numRdRetry 0 # Number of times rd buffer was full causing retry
system.physmem.numWrRetry 0 # Number of times wr buffer was full causing retry
system.physmem.totGap 0 # Total gap between requests
system.physmem.readPktSize::0 0 # Categorize read packet sizes
system.physmem.readPktSize::1 0 # Categorize read packet sizes
system.physmem.readPktSize::2 0 # Categorize read packet sizes
system.physmem.readPktSize::3 0 # Categorize read packet sizes
system.physmem.readPktSize::4 0 # Categorize read packet sizes
system.physmem.readPktSize::5 0 # Categorize read packet sizes
system.physmem.readPktSize::6 0 # Categorize read packet sizes
stats: Update stats to reflect SimpleDRAM changes This patch bumps the stats to reflect the slight change in how the retry is handled, and also the pruning of some redundant stats.
2013-03-01 19:20:30 +01:00
system.physmem.writePktSize::0 0 # Categorize write packet sizes
system.physmem.writePktSize::1 0 # Categorize write packet sizes
system.physmem.writePktSize::2 0 # Categorize write packet sizes
system.physmem.writePktSize::3 0 # Categorize write packet sizes
system.physmem.writePktSize::4 0 # Categorize write packet sizes
system.physmem.writePktSize::5 0 # Categorize write packet sizes
system.physmem.writePktSize::6 0 # Categorize write packet sizes
stats: Update stats to reflect use of SimpleDRAM This patch bumps the stats to match the use of SimpleDRAM instead of SimpleMemory in all inorder and O3 regressions, and also all full-system regressions. A number of performance-related stats change, and a whole bunch of stats are added for the memory controller.
2012-10-25 19:14:42 +02:00
system.physmem.rdQLenPdf::0 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::1 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::2 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::3 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::4 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::5 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::6 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::7 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::8 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::9 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::10 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::11 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::12 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::13 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::14 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::15 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::16 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::17 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::18 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::19 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::20 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::21 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::22 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::23 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::24 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::25 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::26 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::27 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::28 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::29 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::30 0 # What read queue length does an incoming req see
system.physmem.rdQLenPdf::31 0 # What read queue length does an incoming req see
system.physmem.wrQLenPdf::0 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::1 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::2 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::3 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::4 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::5 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::6 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::7 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::8 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::9 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::10 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::11 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::12 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::13 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::14 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::15 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::16 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::17 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::18 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::19 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::20 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::21 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::22 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::23 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::24 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::25 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::26 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::27 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::28 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::29 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::30 0 # What write queue length does an incoming req see
system.physmem.wrQLenPdf::31 0 # What write queue length does an incoming req see
stats: Update the stats to reflect bus and memory changes This patch updates the stats to reflect the addition of the bus stats, and changes to the bus layers. In addition it updates the stats to match the addition of the static pipeline latency of the memory conotroller and the addition of a stat tracking the bytes per activate.
2013-05-30 18:54:18 +02:00
system.physmem.bytesPerActivate::mean nan # Bytes accessed per row activation
system.physmem.bytesPerActivate::gmean nan # Bytes accessed per row activation
system.physmem.bytesPerActivate::stdev nan # Bytes accessed per row activation
stats: Update stats to reflect use of SimpleDRAM This patch bumps the stats to match the use of SimpleDRAM instead of SimpleMemory in all inorder and O3 regressions, and also all full-system regressions. A number of performance-related stats change, and a whole bunch of stats are added for the memory controller.
2012-10-25 19:14:42 +02:00
system.physmem.totQLat 0 # Total cycles spent in queuing delays
system.physmem.totMemAccLat 0 # Sum of mem lat for all requests
system.physmem.totBusLat 0 # Total cycles spent in databus access
system.physmem.totBankLat 0 # Total cycles spent in bank access
system.physmem.avgQLat nan # Average queueing delay per request
system.physmem.avgBankLat nan # Average bank access latency per request
system.physmem.avgBusLat nan # Average bus latency per request
system.physmem.avgMemAccLat nan # Average memory access latency
system.physmem.avgRdBW 0.00 # Average achieved read bandwidth in MB/s
system.physmem.avgWrBW 0.00 # Average achieved write bandwidth in MB/s
system.physmem.avgConsumedRdBW 0.00 # Average consumed read bandwidth in MB/s
system.physmem.avgConsumedWrBW 0.00 # Average consumed write bandwidth in MB/s
stats: Update stats for regressions using SimpleDDR3 This patch updates the regression stats to reflect that they are using the SimpleDDR3 controller by default.
2013-01-31 13:49:16 +01:00
system.physmem.peakBW 12800.00 # Theoretical peak bandwidth in MB/s
stats: Update stats to reflect use of SimpleDRAM This patch bumps the stats to match the use of SimpleDRAM instead of SimpleMemory in all inorder and O3 regressions, and also all full-system regressions. A number of performance-related stats change, and a whole bunch of stats are added for the memory controller.
2012-10-25 19:14:42 +02:00
system.physmem.busUtil 0.00 # Data bus utilization in percentage
system.physmem.avgRdQLen 0.00 # Average read queue length over time
system.physmem.avgWrQLen 0.00 # Average write queue length over time
system.physmem.readRowHits 0 # Number of row buffer hits during reads
system.physmem.writeRowHits 0 # Number of row buffer hits during writes
system.physmem.readRowHitRate nan # Row buffer hit rate for reads
system.physmem.writeRowHitRate nan # Row buffer hit rate for writes
system.physmem.avgGap nan # Average gap between requests
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.membus.throughput 9632725 # Throughput (bytes/s)
system.membus.data_through_bus 49243475 # Total data (bytes)
stats: Update the stats to reflect bus and memory changes This patch updates the stats to reflect the addition of the bus stats, and changes to the bus layers. In addition it updates the stats to match the addition of the static pipeline latency of the memory conotroller and the addition of a stat tracking the bytes per activate.
2013-05-30 18:54:18 +02:00
system.membus.snoop_data_through_bus 0 # Total snoop data (bytes)
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.iocache.tags.replacements 47569 # number of replacements
system.iocache.tags.tagsinuse 0.042449 # Cycle average of tags in use
system.iocache.tags.total_refs 0 # Total number of references to valid blocks.
system.iocache.tags.sampled_refs 47585 # Sample count of references to valid blocks.
system.iocache.tags.avg_refs 0 # Average number of references to valid blocks.
system.iocache.tags.warmup_cycle 4994822663009 # Cycle when the warmup percentage was hit.
system.iocache.tags.occ_blocks::pc.south_bridge.ide 0.042449 # Average occupied blocks per requestor
system.iocache.tags.occ_percent::pc.south_bridge.ide 0.002653 # Average percentage of cache occupancy
system.iocache.tags.occ_percent::total 0.002653 # Average percentage of cache occupancy
system.iocache.ReadReq_misses::pc.south_bridge.ide 904 # number of ReadReq misses
system.iocache.ReadReq_misses::total 904 # number of ReadReq misses
stats: update stats for insts/ops and master id changes
2012-02-12 23:07:43 +01:00
system.iocache.WriteReq_misses::pc.south_bridge.ide 46720 # number of WriteReq misses
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.iocache.WriteReq_misses::total 46720 # number of WriteReq misses
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.iocache.demand_misses::pc.south_bridge.ide 47624 # number of demand (read+write) misses
system.iocache.demand_misses::total 47624 # number of demand (read+write) misses
system.iocache.overall_misses::pc.south_bridge.ide 47624 # number of overall misses
system.iocache.overall_misses::total 47624 # number of overall misses
system.iocache.ReadReq_accesses::pc.south_bridge.ide 904 # number of ReadReq accesses(hits+misses)
system.iocache.ReadReq_accesses::total 904 # number of ReadReq accesses(hits+misses)
stats: update stats for insts/ops and master id changes
2012-02-12 23:07:43 +01:00
system.iocache.WriteReq_accesses::pc.south_bridge.ide 46720 # number of WriteReq accesses(hits+misses)
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.iocache.WriteReq_accesses::total 46720 # number of WriteReq accesses(hits+misses)
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.iocache.demand_accesses::pc.south_bridge.ide 47624 # number of demand (read+write) accesses
system.iocache.demand_accesses::total 47624 # number of demand (read+write) accesses
system.iocache.overall_accesses::pc.south_bridge.ide 47624 # number of overall (read+write) accesses
system.iocache.overall_accesses::total 47624 # number of overall (read+write) accesses
stats: update stats for insts/ops and master id changes
2012-02-12 23:07:43 +01:00
system.iocache.ReadReq_miss_rate::pc.south_bridge.ide 1 # miss rate for ReadReq accesses
all: Update stats for memory per master and total fix.
2012-06-05 07:23:16 +02:00
system.iocache.ReadReq_miss_rate::total 1 # miss rate for ReadReq accesses
stats: update stats for insts/ops and master id changes
2012-02-12 23:07:43 +01:00
system.iocache.WriteReq_miss_rate::pc.south_bridge.ide 1 # miss rate for WriteReq accesses
all: Update stats for memory per master and total fix.
2012-06-05 07:23:16 +02:00
system.iocache.WriteReq_miss_rate::total 1 # miss rate for WriteReq accesses
stats: update stats for insts/ops and master id changes
2012-02-12 23:07:43 +01:00
system.iocache.demand_miss_rate::pc.south_bridge.ide 1 # miss rate for demand accesses
all: Update stats for memory per master and total fix.
2012-06-05 07:23:16 +02:00
system.iocache.demand_miss_rate::total 1 # miss rate for demand accesses
stats: update stats for insts/ops and master id changes
2012-02-12 23:07:43 +01:00
system.iocache.overall_miss_rate::pc.south_bridge.ide 1 # miss rate for overall accesses
all: Update stats for memory per master and total fix.
2012-06-05 07:23:16 +02:00
system.iocache.overall_miss_rate::total 1 # miss rate for overall accesses
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.iocache.blocked_cycles::no_mshrs 0 # number of cycles access was blocked
system.iocache.blocked_cycles::no_targets 0 # number of cycles access was blocked
system.iocache.blocked::no_mshrs 0 # number of cycles access was blocked
system.iocache.blocked::no_targets 0 # number of cycles access was blocked
stats: update stats for no_value -> nan Lots of accumulated older changes too.
2012-05-09 20:52:14 +02:00
system.iocache.avg_blocked_cycles::no_mshrs nan # average number of cycles each access was blocked
system.iocache.avg_blocked_cycles::no_targets nan # average number of cycles each access was blocked
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.iocache.fast_writes 0 # number of fast writes performed
system.iocache.cache_copies 0 # number of cache copies performed
stats: update stats for insts/ops and master id changes
2012-02-12 23:07:43 +01:00
system.iocache.writebacks::writebacks 46667 # number of writebacks
system.iocache.writebacks::total 46667 # number of writebacks
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.iocache.no_allocate_misses 0 # Number of misses that were no-allocate
X86: Add stats for the new x86 fs regressions.
2011-02-07 10:23:16 +01:00
system.pc.south_bridge.ide.disks0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.pc.south_bridge.ide.disks0.dma_read_bytes 34816 # Number of bytes transfered via DMA reads (not PRD).
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.pc.south_bridge.ide.disks0.dma_read_txs 32 # Number of DMA read transactions (not PRD).
X86: Add stats for the new x86 fs regressions.
2011-02-07 10:23:16 +01:00
system.pc.south_bridge.ide.disks0.dma_write_full_pages 693 # Number of full page size DMA writes.
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.pc.south_bridge.ide.disks0.dma_write_bytes 2985984 # Number of bytes transfered via DMA writes.
X86: Add stats for the new x86 fs regressions.
2011-02-07 10:23:16 +01:00
system.pc.south_bridge.ide.disks0.dma_write_txs 812 # Number of DMA write transactions.
system.pc.south_bridge.ide.disks1.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.pc.south_bridge.ide.disks1.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
X86: Add stats for the new x86 fs regressions.
2011-02-07 10:23:16 +01:00
system.pc.south_bridge.ide.disks1.dma_read_txs 0 # Number of DMA read transactions (not PRD).
system.pc.south_bridge.ide.disks1.dma_write_full_pages 1 # Number of full page size DMA writes.
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.pc.south_bridge.ide.disks1.dma_write_bytes 4096 # Number of bytes transfered via DMA writes.
X86: Add stats for the new x86 fs regressions.
2011-02-07 10:23:16 +01:00
system.pc.south_bridge.ide.disks1.dma_write_txs 1 # Number of DMA write transactions.
stats: Update the stats to reflect bus and memory changes This patch updates the stats to reflect the addition of the bus stats, and changes to the bus layers. In addition it updates the stats to match the addition of the static pipeline latency of the memory conotroller and the addition of a stat tracking the bytes per activate.
2013-05-30 18:54:18 +02:00
system.iobus.throughput 2555194 # Throughput (bytes/s)
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.iobus.data_through_bus 13062414 # Total data (bytes)
system.cpu.numCycles 10224204444 # number of cpu cycles simulated
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.cpu.numWorkItemsStarted 0 # number of work items this cpu started
system.cpu.numWorkItemsCompleted 0 # number of work items this cpu completed
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.committedInsts 199908396 # Number of instructions committed
system.cpu.committedOps 409304707 # Number of ops (including micro ops) committed
system.cpu.num_int_alu_accesses 374467605 # Number of integer alu accesses
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.cpu.num_fp_alu_accesses 0 # Number of float alu accesses
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.num_func_calls 2307395 # number of times a function call or return occured
system.cpu.num_conditional_control_insts 39972475 # number of instructions that are conditional controls
system.cpu.num_int_insts 374467605 # number of integer instructions
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.cpu.num_fp_insts 0 # number of float instructions
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.num_int_register_reads 915905592 # number of times the integer registers were read
system.cpu.num_int_register_writes 480549431 # number of times the integer registers were written
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.cpu.num_fp_register_reads 0 # number of times the floating registers were read
system.cpu.num_fp_register_writes 0 # number of times the floating registers were written
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.num_mem_refs 35655576 # number of memory refs
system.cpu.num_load_insts 27235236 # Number of load instructions
system.cpu.num_store_insts 8420340 # Number of store instructions
system.cpu.num_idle_cycles 9770516372.735863 # Number of idle cycles
system.cpu.num_busy_cycles 453688071.264138 # Number of busy cycles
system.cpu.not_idle_fraction 0.044374 # Percentage of non-idle cycles
system.cpu.idle_fraction 0.955626 # Percentage of idle cycles
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.cpu.kern.inst.arm 0 # number of arm instructions executed
system.cpu.kern.inst.quiesce 0 # number of quiesce instructions executed
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.icache.tags.replacements 790522 # number of replacements
system.cpu.icache.tags.tagsinuse 510.666660 # Cycle average of tags in use
system.cpu.icache.tags.total_refs 243495984 # Total number of references to valid blocks.
system.cpu.icache.tags.sampled_refs 791034 # Sample count of references to valid blocks.
system.cpu.icache.tags.avg_refs 307.819871 # Average number of references to valid blocks.
system.cpu.icache.tags.warmup_cycle 148824778500 # Cycle when the warmup percentage was hit.
system.cpu.icache.tags.occ_blocks::cpu.inst 510.666660 # Average occupied blocks per requestor
system.cpu.icache.tags.occ_percent::cpu.inst 0.997396 # Average percentage of cache occupancy
system.cpu.icache.tags.occ_percent::total 0.997396 # Average percentage of cache occupancy
system.cpu.icache.ReadReq_hits::cpu.inst 243495984 # number of ReadReq hits
system.cpu.icache.ReadReq_hits::total 243495984 # number of ReadReq hits
system.cpu.icache.demand_hits::cpu.inst 243495984 # number of demand (read+write) hits
system.cpu.icache.demand_hits::total 243495984 # number of demand (read+write) hits
system.cpu.icache.overall_hits::cpu.inst 243495984 # number of overall hits
system.cpu.icache.overall_hits::total 243495984 # number of overall hits
system.cpu.icache.ReadReq_misses::cpu.inst 791041 # number of ReadReq misses
system.cpu.icache.ReadReq_misses::total 791041 # number of ReadReq misses
system.cpu.icache.demand_misses::cpu.inst 791041 # number of demand (read+write) misses
system.cpu.icache.demand_misses::total 791041 # number of demand (read+write) misses
system.cpu.icache.overall_misses::cpu.inst 791041 # number of overall misses
system.cpu.icache.overall_misses::total 791041 # number of overall misses
system.cpu.icache.ReadReq_accesses::cpu.inst 244287025 # number of ReadReq accesses(hits+misses)
system.cpu.icache.ReadReq_accesses::total 244287025 # number of ReadReq accesses(hits+misses)
system.cpu.icache.demand_accesses::cpu.inst 244287025 # number of demand (read+write) accesses
system.cpu.icache.demand_accesses::total 244287025 # number of demand (read+write) accesses
system.cpu.icache.overall_accesses::cpu.inst 244287025 # number of overall (read+write) accesses
system.cpu.icache.overall_accesses::total 244287025 # number of overall (read+write) accesses
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.icache.ReadReq_miss_rate::cpu.inst 0.003238 # miss rate for ReadReq accesses
system.cpu.icache.ReadReq_miss_rate::total 0.003238 # miss rate for ReadReq accesses
system.cpu.icache.demand_miss_rate::cpu.inst 0.003238 # miss rate for demand accesses
system.cpu.icache.demand_miss_rate::total 0.003238 # miss rate for demand accesses
system.cpu.icache.overall_miss_rate::cpu.inst 0.003238 # miss rate for overall accesses
system.cpu.icache.overall_miss_rate::total 0.003238 # miss rate for overall accesses
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.cpu.icache.blocked_cycles::no_mshrs 0 # number of cycles access was blocked
system.cpu.icache.blocked_cycles::no_targets 0 # number of cycles access was blocked
system.cpu.icache.blocked::no_mshrs 0 # number of cycles access was blocked
system.cpu.icache.blocked::no_targets 0 # number of cycles access was blocked
stats: update stats for no_value -> nan Lots of accumulated older changes too.
2012-05-09 20:52:14 +02:00
system.cpu.icache.avg_blocked_cycles::no_mshrs nan # average number of cycles each access was blocked
system.cpu.icache.avg_blocked_cycles::no_targets nan # average number of cycles each access was blocked
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.cpu.icache.fast_writes 0 # number of fast writes performed
system.cpu.icache.cache_copies 0 # number of cache copies performed
system.cpu.icache.no_allocate_misses 0 # Number of misses that were no-allocate
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.itb_walker_cache.tags.replacements 3477 # number of replacements
system.cpu.itb_walker_cache.tags.tagsinuse 3.026296 # Cycle average of tags in use
system.cpu.itb_walker_cache.tags.total_refs 7886 # Total number of references to valid blocks.
system.cpu.itb_walker_cache.tags.sampled_refs 3489 # Sample count of references to valid blocks.
system.cpu.itb_walker_cache.tags.avg_refs 2.260246 # Average number of references to valid blocks.
system.cpu.itb_walker_cache.tags.warmup_cycle 5102094222000 # Cycle when the warmup percentage was hit.
system.cpu.itb_walker_cache.tags.occ_blocks::cpu.itb.walker 3.026296 # Average occupied blocks per requestor
system.cpu.itb_walker_cache.tags.occ_percent::cpu.itb.walker 0.189143 # Average percentage of cache occupancy
system.cpu.itb_walker_cache.tags.occ_percent::total 0.189143 # Average percentage of cache occupancy
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.itb_walker_cache.ReadReq_hits::cpu.itb.walker 7887 # number of ReadReq hits
system.cpu.itb_walker_cache.ReadReq_hits::total 7887 # number of ReadReq hits
stats: update stats for insts/ops and master id changes
2012-02-12 23:07:43 +01:00
system.cpu.itb_walker_cache.WriteReq_hits::cpu.itb.walker 2 # number of WriteReq hits
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.cpu.itb_walker_cache.WriteReq_hits::total 2 # number of WriteReq hits
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.itb_walker_cache.demand_hits::cpu.itb.walker 7889 # number of demand (read+write) hits
system.cpu.itb_walker_cache.demand_hits::total 7889 # number of demand (read+write) hits
system.cpu.itb_walker_cache.overall_hits::cpu.itb.walker 7889 # number of overall hits
system.cpu.itb_walker_cache.overall_hits::total 7889 # number of overall hits
system.cpu.itb_walker_cache.ReadReq_misses::cpu.itb.walker 4332 # number of ReadReq misses
system.cpu.itb_walker_cache.ReadReq_misses::total 4332 # number of ReadReq misses
system.cpu.itb_walker_cache.demand_misses::cpu.itb.walker 4332 # number of demand (read+write) misses
system.cpu.itb_walker_cache.demand_misses::total 4332 # number of demand (read+write) misses
system.cpu.itb_walker_cache.overall_misses::cpu.itb.walker 4332 # number of overall misses
system.cpu.itb_walker_cache.overall_misses::total 4332 # number of overall misses
system.cpu.itb_walker_cache.ReadReq_accesses::cpu.itb.walker 12219 # number of ReadReq accesses(hits+misses)
system.cpu.itb_walker_cache.ReadReq_accesses::total 12219 # number of ReadReq accesses(hits+misses)
stats: update stats for insts/ops and master id changes
2012-02-12 23:07:43 +01:00
system.cpu.itb_walker_cache.WriteReq_accesses::cpu.itb.walker 2 # number of WriteReq accesses(hits+misses)
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.cpu.itb_walker_cache.WriteReq_accesses::total 2 # number of WriteReq accesses(hits+misses)
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.itb_walker_cache.demand_accesses::cpu.itb.walker 12221 # number of demand (read+write) accesses
system.cpu.itb_walker_cache.demand_accesses::total 12221 # number of demand (read+write) accesses
system.cpu.itb_walker_cache.overall_accesses::cpu.itb.walker 12221 # number of overall (read+write) accesses
system.cpu.itb_walker_cache.overall_accesses::total 12221 # number of overall (read+write) accesses
system.cpu.itb_walker_cache.ReadReq_miss_rate::cpu.itb.walker 0.354530 # miss rate for ReadReq accesses
system.cpu.itb_walker_cache.ReadReq_miss_rate::total 0.354530 # miss rate for ReadReq accesses
system.cpu.itb_walker_cache.demand_miss_rate::cpu.itb.walker 0.354472 # miss rate for demand accesses
system.cpu.itb_walker_cache.demand_miss_rate::total 0.354472 # miss rate for demand accesses
system.cpu.itb_walker_cache.overall_miss_rate::cpu.itb.walker 0.354472 # miss rate for overall accesses
system.cpu.itb_walker_cache.overall_miss_rate::total 0.354472 # miss rate for overall accesses
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.cpu.itb_walker_cache.blocked_cycles::no_mshrs 0 # number of cycles access was blocked
system.cpu.itb_walker_cache.blocked_cycles::no_targets 0 # number of cycles access was blocked
system.cpu.itb_walker_cache.blocked::no_mshrs 0 # number of cycles access was blocked
system.cpu.itb_walker_cache.blocked::no_targets 0 # number of cycles access was blocked
stats: update stats for no_value -> nan Lots of accumulated older changes too.
2012-05-09 20:52:14 +02:00
system.cpu.itb_walker_cache.avg_blocked_cycles::no_mshrs nan # average number of cycles each access was blocked
system.cpu.itb_walker_cache.avg_blocked_cycles::no_targets nan # average number of cycles each access was blocked
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.cpu.itb_walker_cache.fast_writes 0 # number of fast writes performed
system.cpu.itb_walker_cache.cache_copies 0 # number of cache copies performed
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.itb_walker_cache.writebacks::writebacks 526 # number of writebacks
system.cpu.itb_walker_cache.writebacks::total 526 # number of writebacks
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.cpu.itb_walker_cache.no_allocate_misses 0 # Number of misses that were no-allocate
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.dtb_walker_cache.tags.replacements 7632 # number of replacements
system.cpu.dtb_walker_cache.tags.tagsinuse 5.014181 # Cycle average of tags in use
system.cpu.dtb_walker_cache.tags.total_refs 12948 # Total number of references to valid blocks.
system.cpu.dtb_walker_cache.tags.sampled_refs 7644 # Sample count of references to valid blocks.
system.cpu.dtb_walker_cache.tags.avg_refs 1.693878 # Average number of references to valid blocks.
system.cpu.dtb_walker_cache.tags.warmup_cycle 5100438909500 # Cycle when the warmup percentage was hit.
system.cpu.dtb_walker_cache.tags.occ_blocks::cpu.dtb.walker 5.014181 # Average occupied blocks per requestor
system.cpu.dtb_walker_cache.tags.occ_percent::cpu.dtb.walker 0.313386 # Average percentage of cache occupancy
system.cpu.dtb_walker_cache.tags.occ_percent::total 0.313386 # Average percentage of cache occupancy
system.cpu.dtb_walker_cache.ReadReq_hits::cpu.dtb.walker 12956 # number of ReadReq hits
system.cpu.dtb_walker_cache.ReadReq_hits::total 12956 # number of ReadReq hits
system.cpu.dtb_walker_cache.demand_hits::cpu.dtb.walker 12956 # number of demand (read+write) hits
system.cpu.dtb_walker_cache.demand_hits::total 12956 # number of demand (read+write) hits
system.cpu.dtb_walker_cache.overall_hits::cpu.dtb.walker 12956 # number of overall hits
system.cpu.dtb_walker_cache.overall_hits::total 12956 # number of overall hits
system.cpu.dtb_walker_cache.ReadReq_misses::cpu.dtb.walker 8822 # number of ReadReq misses
system.cpu.dtb_walker_cache.ReadReq_misses::total 8822 # number of ReadReq misses
system.cpu.dtb_walker_cache.demand_misses::cpu.dtb.walker 8822 # number of demand (read+write) misses
system.cpu.dtb_walker_cache.demand_misses::total 8822 # number of demand (read+write) misses
system.cpu.dtb_walker_cache.overall_misses::cpu.dtb.walker 8822 # number of overall misses
system.cpu.dtb_walker_cache.overall_misses::total 8822 # number of overall misses
system.cpu.dtb_walker_cache.ReadReq_accesses::cpu.dtb.walker 21778 # number of ReadReq accesses(hits+misses)
system.cpu.dtb_walker_cache.ReadReq_accesses::total 21778 # number of ReadReq accesses(hits+misses)
system.cpu.dtb_walker_cache.demand_accesses::cpu.dtb.walker 21778 # number of demand (read+write) accesses
system.cpu.dtb_walker_cache.demand_accesses::total 21778 # number of demand (read+write) accesses
system.cpu.dtb_walker_cache.overall_accesses::cpu.dtb.walker 21778 # number of overall (read+write) accesses
system.cpu.dtb_walker_cache.overall_accesses::total 21778 # number of overall (read+write) accesses
system.cpu.dtb_walker_cache.ReadReq_miss_rate::cpu.dtb.walker 0.405088 # miss rate for ReadReq accesses
system.cpu.dtb_walker_cache.ReadReq_miss_rate::total 0.405088 # miss rate for ReadReq accesses
system.cpu.dtb_walker_cache.demand_miss_rate::cpu.dtb.walker 0.405088 # miss rate for demand accesses
system.cpu.dtb_walker_cache.demand_miss_rate::total 0.405088 # miss rate for demand accesses
system.cpu.dtb_walker_cache.overall_miss_rate::cpu.dtb.walker 0.405088 # miss rate for overall accesses
system.cpu.dtb_walker_cache.overall_miss_rate::total 0.405088 # miss rate for overall accesses
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.cpu.dtb_walker_cache.blocked_cycles::no_mshrs 0 # number of cycles access was blocked
system.cpu.dtb_walker_cache.blocked_cycles::no_targets 0 # number of cycles access was blocked
system.cpu.dtb_walker_cache.blocked::no_mshrs 0 # number of cycles access was blocked
system.cpu.dtb_walker_cache.blocked::no_targets 0 # number of cycles access was blocked
stats: update stats for no_value -> nan Lots of accumulated older changes too.
2012-05-09 20:52:14 +02:00
system.cpu.dtb_walker_cache.avg_blocked_cycles::no_mshrs nan # average number of cycles each access was blocked
system.cpu.dtb_walker_cache.avg_blocked_cycles::no_targets nan # average number of cycles each access was blocked
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.cpu.dtb_walker_cache.fast_writes 0 # number of fast writes performed
system.cpu.dtb_walker_cache.cache_copies 0 # number of cache copies performed
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.dtb_walker_cache.writebacks::writebacks 2413 # number of writebacks
system.cpu.dtb_walker_cache.writebacks::total 2413 # number of writebacks
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.cpu.dtb_walker_cache.no_allocate_misses 0 # Number of misses that were no-allocate
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.dcache.tags.replacements 1622027 # number of replacements
system.cpu.dcache.tags.tagsinuse 511.999424 # Cycle average of tags in use
system.cpu.dcache.tags.total_refs 20170040 # Total number of references to valid blocks.
system.cpu.dcache.tags.sampled_refs 1622539 # Sample count of references to valid blocks.
system.cpu.dcache.tags.avg_refs 12.431159 # Average number of references to valid blocks.
system.cpu.dcache.tags.warmup_cycle 7549500 # Cycle when the warmup percentage was hit.
system.cpu.dcache.tags.occ_blocks::cpu.data 511.999424 # Average occupied blocks per requestor
system.cpu.dcache.tags.occ_percent::cpu.data 0.999999 # Average percentage of cache occupancy
system.cpu.dcache.tags.occ_percent::total 0.999999 # Average percentage of cache occupancy
system.cpu.dcache.ReadReq_hits::cpu.data 12074025 # number of ReadReq hits
system.cpu.dcache.ReadReq_hits::total 12074025 # number of ReadReq hits
system.cpu.dcache.WriteReq_hits::cpu.data 8093747 # number of WriteReq hits
system.cpu.dcache.WriteReq_hits::total 8093747 # number of WriteReq hits
system.cpu.dcache.demand_hits::cpu.data 20167772 # number of demand (read+write) hits
system.cpu.dcache.demand_hits::total 20167772 # number of demand (read+write) hits
system.cpu.dcache.overall_hits::cpu.data 20167772 # number of overall hits
system.cpu.dcache.overall_hits::total 20167772 # number of overall hits
system.cpu.dcache.ReadReq_misses::cpu.data 1308420 # number of ReadReq misses
system.cpu.dcache.ReadReq_misses::total 1308420 # number of ReadReq misses
system.cpu.dcache.WriteReq_misses::cpu.data 316403 # number of WriteReq misses
system.cpu.dcache.WriteReq_misses::total 316403 # number of WriteReq misses
system.cpu.dcache.demand_misses::cpu.data 1624823 # number of demand (read+write) misses
system.cpu.dcache.demand_misses::total 1624823 # number of demand (read+write) misses
system.cpu.dcache.overall_misses::cpu.data 1624823 # number of overall misses
system.cpu.dcache.overall_misses::total 1624823 # number of overall misses
system.cpu.dcache.ReadReq_accesses::cpu.data 13382445 # number of ReadReq accesses(hits+misses)
system.cpu.dcache.ReadReq_accesses::total 13382445 # number of ReadReq accesses(hits+misses)
system.cpu.dcache.WriteReq_accesses::cpu.data 8410150 # number of WriteReq accesses(hits+misses)
system.cpu.dcache.WriteReq_accesses::total 8410150 # number of WriteReq accesses(hits+misses)
system.cpu.dcache.demand_accesses::cpu.data 21792595 # number of demand (read+write) accesses
system.cpu.dcache.demand_accesses::total 21792595 # number of demand (read+write) accesses
system.cpu.dcache.overall_accesses::cpu.data 21792595 # number of overall (read+write) accesses
system.cpu.dcache.overall_accesses::total 21792595 # number of overall (read+write) accesses
system.cpu.dcache.ReadReq_miss_rate::cpu.data 0.097771 # miss rate for ReadReq accesses
system.cpu.dcache.ReadReq_miss_rate::total 0.097771 # miss rate for ReadReq accesses
x86, stats: updates due to lret bugfix
2013-04-23 07:03:05 +02:00
system.cpu.dcache.WriteReq_miss_rate::cpu.data 0.037622 # miss rate for WriteReq accesses
system.cpu.dcache.WriteReq_miss_rate::total 0.037622 # miss rate for WriteReq accesses
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.dcache.demand_miss_rate::cpu.data 0.074558 # miss rate for demand accesses
system.cpu.dcache.demand_miss_rate::total 0.074558 # miss rate for demand accesses
system.cpu.dcache.overall_miss_rate::cpu.data 0.074558 # miss rate for overall accesses
system.cpu.dcache.overall_miss_rate::total 0.074558 # miss rate for overall accesses
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.cpu.dcache.blocked_cycles::no_mshrs 0 # number of cycles access was blocked
system.cpu.dcache.blocked_cycles::no_targets 0 # number of cycles access was blocked
system.cpu.dcache.blocked::no_mshrs 0 # number of cycles access was blocked
system.cpu.dcache.blocked::no_targets 0 # number of cycles access was blocked
stats: update stats for no_value -> nan Lots of accumulated older changes too.
2012-05-09 20:52:14 +02:00
system.cpu.dcache.avg_blocked_cycles::no_mshrs nan # average number of cycles each access was blocked
system.cpu.dcache.avg_blocked_cycles::no_targets nan # average number of cycles each access was blocked
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.cpu.dcache.fast_writes 0 # number of fast writes performed
system.cpu.dcache.cache_copies 0 # number of cache copies performed
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.dcache.writebacks::writebacks 1535756 # number of writebacks
system.cpu.dcache.writebacks::total 1535756 # number of writebacks
Tests: Update stats due to addition of fence microop
2011-11-05 21:32:23 +01:00
system.cpu.dcache.no_allocate_misses 0 # Number of misses that were no-allocate
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.toL2Bus.throughput 54622987 # Throughput (bytes/s)
system.cpu.toL2Bus.data_through_bus 279212819 # Total data (bytes)
system.cpu.toL2Bus.snoop_data_through_bus 25472 # Total snoop data (bytes)
system.cpu.l2cache.tags.replacements 105931 # number of replacements
system.cpu.l2cache.tags.tagsinuse 64819.947299 # Cycle average of tags in use
system.cpu.l2cache.tags.total_refs 3456551 # Total number of references to valid blocks.
system.cpu.l2cache.tags.sampled_refs 170059 # Sample count of references to valid blocks.
system.cpu.l2cache.tags.avg_refs 20.325599 # Average number of references to valid blocks.
system.cpu.l2cache.tags.warmup_cycle 0 # Cycle when the warmup percentage was hit.
system.cpu.l2cache.tags.occ_blocks::writebacks 51906.795355 # Average occupied blocks per requestor
system.cpu.l2cache.tags.occ_blocks::cpu.dtb.walker 0.004959 # Average occupied blocks per requestor
system.cpu.l2cache.tags.occ_blocks::cpu.itb.walker 0.132237 # Average occupied blocks per requestor
system.cpu.l2cache.tags.occ_blocks::cpu.inst 2490.582004 # Average occupied blocks per requestor
system.cpu.l2cache.tags.occ_blocks::cpu.data 10422.432745 # Average occupied blocks per requestor
system.cpu.l2cache.tags.occ_percent::writebacks 0.792035 # Average percentage of cache occupancy
system.cpu.l2cache.tags.occ_percent::cpu.dtb.walker 0.000000 # Average percentage of cache occupancy
system.cpu.l2cache.tags.occ_percent::cpu.itb.walker 0.000002 # Average percentage of cache occupancy
system.cpu.l2cache.tags.occ_percent::cpu.inst 0.038003 # Average percentage of cache occupancy
system.cpu.l2cache.tags.occ_percent::cpu.data 0.159034 # Average percentage of cache occupancy
system.cpu.l2cache.tags.occ_percent::total 0.989074 # Average percentage of cache occupancy
system.cpu.l2cache.ReadReq_hits::cpu.dtb.walker 6502 # number of ReadReq hits
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.l2cache.ReadReq_hits::cpu.itb.walker 2802 # number of ReadReq hits
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.l2cache.ReadReq_hits::cpu.inst 777703 # number of ReadReq hits
system.cpu.l2cache.ReadReq_hits::cpu.data 1275544 # number of ReadReq hits
system.cpu.l2cache.ReadReq_hits::total 2062551 # number of ReadReq hits
system.cpu.l2cache.Writeback_hits::writebacks 1538695 # number of Writeback hits
system.cpu.l2cache.Writeback_hits::total 1538695 # number of Writeback hits
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.l2cache.UpgradeReq_hits::cpu.data 20 # number of UpgradeReq hits
system.cpu.l2cache.UpgradeReq_hits::total 20 # number of UpgradeReq hits
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.l2cache.ReadExReq_hits::cpu.data 179738 # number of ReadExReq hits
system.cpu.l2cache.ReadExReq_hits::total 179738 # number of ReadExReq hits
system.cpu.l2cache.demand_hits::cpu.dtb.walker 6502 # number of demand (read+write) hits
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.l2cache.demand_hits::cpu.itb.walker 2802 # number of demand (read+write) hits
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.l2cache.demand_hits::cpu.inst 777703 # number of demand (read+write) hits
system.cpu.l2cache.demand_hits::cpu.data 1455282 # number of demand (read+write) hits
system.cpu.l2cache.demand_hits::total 2242289 # number of demand (read+write) hits
system.cpu.l2cache.overall_hits::cpu.dtb.walker 6502 # number of overall hits
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.l2cache.overall_hits::cpu.itb.walker 2802 # number of overall hits
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.l2cache.overall_hits::cpu.inst 777703 # number of overall hits
system.cpu.l2cache.overall_hits::cpu.data 1455282 # number of overall hits
system.cpu.l2cache.overall_hits::total 2242289 # number of overall hits
Stats: Update stats for cache timings in cycles This patch updates the stats to reflect the change in how cache latencies are expressed. In addition, the latencies are now rounded to multiples of the clock period, thus also affecting other stats.
2012-10-15 14:12:21 +02:00
system.cpu.l2cache.ReadReq_misses::cpu.dtb.walker 2 # number of ReadReq misses
system.cpu.l2cache.ReadReq_misses::cpu.itb.walker 5 # number of ReadReq misses
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.l2cache.ReadReq_misses::cpu.inst 13325 # number of ReadReq misses
x86, stats: updates due to lret bugfix
2013-04-23 07:03:05 +02:00
system.cpu.l2cache.ReadReq_misses::cpu.data 32246 # number of ReadReq misses
system.cpu.l2cache.ReadReq_misses::total 45578 # number of ReadReq misses
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.l2cache.UpgradeReq_misses::cpu.data 1803 # number of UpgradeReq misses
system.cpu.l2cache.UpgradeReq_misses::total 1803 # number of UpgradeReq misses
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.l2cache.ReadExReq_misses::cpu.data 134392 # number of ReadExReq misses
system.cpu.l2cache.ReadExReq_misses::total 134392 # number of ReadExReq misses
Stats: Update stats for cache timings in cycles This patch updates the stats to reflect the change in how cache latencies are expressed. In addition, the latencies are now rounded to multiples of the clock period, thus also affecting other stats.
2012-10-15 14:12:21 +02:00
system.cpu.l2cache.demand_misses::cpu.dtb.walker 2 # number of demand (read+write) misses
system.cpu.l2cache.demand_misses::cpu.itb.walker 5 # number of demand (read+write) misses
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.l2cache.demand_misses::cpu.inst 13325 # number of demand (read+write) misses
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.l2cache.demand_misses::cpu.data 166638 # number of demand (read+write) misses
system.cpu.l2cache.demand_misses::total 179970 # number of demand (read+write) misses
Stats: Update stats for cache timings in cycles This patch updates the stats to reflect the change in how cache latencies are expressed. In addition, the latencies are now rounded to multiples of the clock period, thus also affecting other stats.
2012-10-15 14:12:21 +02:00
system.cpu.l2cache.overall_misses::cpu.dtb.walker 2 # number of overall misses
system.cpu.l2cache.overall_misses::cpu.itb.walker 5 # number of overall misses
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.l2cache.overall_misses::cpu.inst 13325 # number of overall misses
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.l2cache.overall_misses::cpu.data 166638 # number of overall misses
system.cpu.l2cache.overall_misses::total 179970 # number of overall misses
system.cpu.l2cache.ReadReq_accesses::cpu.dtb.walker 6504 # number of ReadReq accesses(hits+misses)
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.l2cache.ReadReq_accesses::cpu.itb.walker 2807 # number of ReadReq accesses(hits+misses)
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.l2cache.ReadReq_accesses::cpu.inst 791028 # number of ReadReq accesses(hits+misses)
system.cpu.l2cache.ReadReq_accesses::cpu.data 1307790 # number of ReadReq accesses(hits+misses)
system.cpu.l2cache.ReadReq_accesses::total 2108129 # number of ReadReq accesses(hits+misses)
system.cpu.l2cache.Writeback_accesses::writebacks 1538695 # number of Writeback accesses(hits+misses)
system.cpu.l2cache.Writeback_accesses::total 1538695 # number of Writeback accesses(hits+misses)
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.l2cache.UpgradeReq_accesses::cpu.data 1823 # number of UpgradeReq accesses(hits+misses)
system.cpu.l2cache.UpgradeReq_accesses::total 1823 # number of UpgradeReq accesses(hits+misses)
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.l2cache.ReadExReq_accesses::cpu.data 314130 # number of ReadExReq accesses(hits+misses)
system.cpu.l2cache.ReadExReq_accesses::total 314130 # number of ReadExReq accesses(hits+misses)
system.cpu.l2cache.demand_accesses::cpu.dtb.walker 6504 # number of demand (read+write) accesses
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.l2cache.demand_accesses::cpu.itb.walker 2807 # number of demand (read+write) accesses
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.l2cache.demand_accesses::cpu.inst 791028 # number of demand (read+write) accesses
system.cpu.l2cache.demand_accesses::cpu.data 1621920 # number of demand (read+write) accesses
system.cpu.l2cache.demand_accesses::total 2422259 # number of demand (read+write) accesses
system.cpu.l2cache.overall_accesses::cpu.dtb.walker 6504 # number of overall (read+write) accesses
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.l2cache.overall_accesses::cpu.itb.walker 2807 # number of overall (read+write) accesses
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.l2cache.overall_accesses::cpu.inst 791028 # number of overall (read+write) accesses
system.cpu.l2cache.overall_accesses::cpu.data 1621920 # number of overall (read+write) accesses
system.cpu.l2cache.overall_accesses::total 2422259 # number of overall (read+write) accesses
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.l2cache.ReadReq_miss_rate::cpu.dtb.walker 0.000308 # miss rate for ReadReq accesses
system.cpu.l2cache.ReadReq_miss_rate::cpu.itb.walker 0.001781 # miss rate for ReadReq accesses
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.l2cache.ReadReq_miss_rate::cpu.inst 0.016845 # miss rate for ReadReq accesses
system.cpu.l2cache.ReadReq_miss_rate::cpu.data 0.024657 # miss rate for ReadReq accesses
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.l2cache.ReadReq_miss_rate::total 0.021620 # miss rate for ReadReq accesses
system.cpu.l2cache.UpgradeReq_miss_rate::cpu.data 0.989029 # miss rate for UpgradeReq accesses
system.cpu.l2cache.UpgradeReq_miss_rate::total 0.989029 # miss rate for UpgradeReq accesses
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.l2cache.ReadExReq_miss_rate::cpu.data 0.427823 # miss rate for ReadExReq accesses
system.cpu.l2cache.ReadExReq_miss_rate::total 0.427823 # miss rate for ReadExReq accesses
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.l2cache.demand_miss_rate::cpu.dtb.walker 0.000308 # miss rate for demand accesses
system.cpu.l2cache.demand_miss_rate::cpu.itb.walker 0.001781 # miss rate for demand accesses
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.l2cache.demand_miss_rate::cpu.inst 0.016845 # miss rate for demand accesses
system.cpu.l2cache.demand_miss_rate::cpu.data 0.102741 # miss rate for demand accesses
system.cpu.l2cache.demand_miss_rate::total 0.074298 # miss rate for demand accesses
regressions: updates due to changes to o3 cpu, x86 memory map
2013-03-29 20:05:36 +01:00
system.cpu.l2cache.overall_miss_rate::cpu.dtb.walker 0.000308 # miss rate for overall accesses
system.cpu.l2cache.overall_miss_rate::cpu.itb.walker 0.001781 # miss rate for overall accesses
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.l2cache.overall_miss_rate::cpu.inst 0.016845 # miss rate for overall accesses
system.cpu.l2cache.overall_miss_rate::cpu.data 0.102741 # miss rate for overall accesses
system.cpu.l2cache.overall_miss_rate::total 0.074298 # miss rate for overall accesses
Stats: Update stats for cache timings in cycles This patch updates the stats to reflect the change in how cache latencies are expressed. In addition, the latencies are now rounded to multiples of the clock period, thus also affecting other stats.
2012-10-15 14:12:21 +02:00
system.cpu.l2cache.blocked_cycles::no_mshrs 0 # number of cycles access was blocked
system.cpu.l2cache.blocked_cycles::no_targets 0 # number of cycles access was blocked
system.cpu.l2cache.blocked::no_mshrs 0 # number of cycles access was blocked
system.cpu.l2cache.blocked::no_targets 0 # number of cycles access was blocked
system.cpu.l2cache.avg_blocked_cycles::no_mshrs nan # average number of cycles each access was blocked
system.cpu.l2cache.avg_blocked_cycles::no_targets nan # average number of cycles each access was blocked
system.cpu.l2cache.fast_writes 0 # number of fast writes performed
system.cpu.l2cache.cache_copies 0 # number of cache copies performed
stats: Update stats for monitor, cache and bus changes This patch removes the sparse histogram total from the CommMonitor stats. It also bumps the stats after the unit fixes in the atomic cache access. Lastly, it updates the stats to match the new port ordering. All numbers are the same, and the only thing that changes is which master corresponds to what port index.
2013-06-27 11:49:51 +02:00
system.cpu.l2cache.writebacks::writebacks 98091 # number of writebacks
system.cpu.l2cache.writebacks::total 98091 # number of writebacks
Stats: Update stats for cache timings in cycles This patch updates the stats to reflect the change in how cache latencies are expressed. In addition, the latencies are now rounded to multiples of the clock period, thus also affecting other stats.
2012-10-15 14:12:21 +02:00
system.cpu.l2cache.no_allocate_misses 0 # Number of misses that were no-allocate
X86: Add stats for the new x86 fs regressions.
2011-02-07 10:23:16 +01:00
---------- End Simulation Statistics ----------
Reference in a new issue Copy permalink