dev/ns_gige.cc:
Clean up the interrupt code. Do a better job determining when
coalescing should happen.
Remove some bogus comments
Stop using magic numbers in initialization and comment what
the various numbers do
dev/ns_gige_reg.h:
#define describing which interrupts cannot be delayed and
which interrrupts we don't implement
--HG--
extra : convert_revision : eb196afa0bf448e1849dd2bd30dde32134effee7
dev/ns_gige.cc:
Make all DPRINTF statements take one line. If they need two lines,
break them up into separate statements. This makes grep much more
effective since *every* line will be prefixed by the cycle that the
trace message is from and the object that caused the message.
normalize some debugging statements so that searching is easier
(e.g. always say rxState, not rx state or receive state)
break into the debugger when a packet is dropped since we don't really
like dropping packets.
--HG--
extra : convert_revision : 9cf309ca2143a6b8c8215ac5dd6a31aae60173cd
whether or not the state machine is enabled rather than tracking the
specific instance of trying to halt the state machine.
dev/ns_gige.cc:
change back to tracking the state machine's enableness instead of
whether or not it is trying to halt. Also fix a major bug that
would cause the NIC to drop packets when the rx state machine was
idle, but enabled.
Fix a couple other bugs in the state machine where the idle interrupt
would happen at the wrong time.
Add a warning to deal with improper values of intrTick
dev/ns_gige.hh:
We need to keep track of whether the state machine is enabled
or not separately from the control register since the bits don't
always reflect the truth.
--HG--
extra : convert_revision : 20056b225fa62a0744473babfd693506aa5f29b2
argh!
dev/ns_gige.cc:
Exit the state machine so that we don't come right back where
we started and enter an infinite loop.
--HG--
extra : convert_revision : a5f2b5b5a692de6c80e4b02d7f9bc5d27fe17252
ticks for the most commonly accessed devices.
dev/baddev.cc:
Get rid of the constant cache access latency.
For unimportant devices, don't add any latency.
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ns_gige.cc:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
dev/uart.cc:
dev/uart.hh:
make the cache access latency a parameter that is based on bus
ticks.
dev/io_device.cc:
dev/io_device.hh:
add an io latency variable
dev/ns_gige.hh:
this moved to io_device.hh
--HG--
extra : convert_revision : 4883130feeaef48abee492eddf0b8eb40eb94789
dev/ns_gige.cc:
make tx/rx fifo sizes a param. the default is 128K for each. also, make the state machine not move onto txFragRead if there is no room in the txfifo for data.
dev/ns_gige.hh:
make tx/rx fifo size a param
--HG--
extra : convert_revision : ed91eb31c2b21d4cdc6de87d8641df6197be5209
dev/ns_gige.cc:
tell all outgoing dma events that this request is from the NIC
--HG--
extra : convert_revision : 62af17a2728a0ff729e7723dc29bd0d130ca5fe3
dev/ns_gige.cc:
transmit side checksum offloading doesn't need pseudo header generation, it just takes the pseudo header checksum and uses it.
--HG--
extra : convert_revision : 9741bd650415c18ed37b06a453b23610d028135b
base/traceflags.py:
added some more traceflags for ethernet to break it up better
dev/etherpkt.hh:
since we are not network host order, must reverse bytes for these typechecks.
also, overload isTcp/UdpPkt to take an argument so you don't have to reget the ip header if you've already got one.
dev/ns_gige.cc:
1) add some functions that reverse Endianness so we can generate adn evaluate checksum adn dprintf data accurately/more understandably
2) forget about the implementation of fifo fill/drain thresholds, it's not used by the driver much, nor does it matter with use sending/receiving in whole packets anyway.
get rid of teh associated variables.
3) get rid of txFifoCnt the variable, it's redundant and unnecessary, just use txFifoAvail.
4) change io_enable to ioEnable, just to be picky.
5) modify some DPRINTF's to be clearer, also added a lot, and spread them into better traceflag categories
6) fix the device bug! it's the intrTick = 0 at teh beginning of cpuInterrupt().
7) clear some bools in regsReset() so they don't holdover wrong state
8) fix pseudo header generation for Tcp checksumming to account for network order
dev/ns_gige.hh:
change io_enable to ioEnable, get rid of fill/drain thresh related variables and txFifoCnt, which is redundant
--HG--
extra : convert_revision : c538b75731f3c9e04354f57e6df9a40aeca5096d
dev/ide_ctrl.cc:
generalize these #defs
dev/ide_ctrl.hh:
put these in pcireg.h
dev/ns_gige.cc:
do i need io_enable? and assert will fail if i actually need to implement it, which may give clue as to wehtehr i need to implmeent the mem_enable and bm_enable stuff.
dev/ns_gige.hh:
implement this in case it's needed
dev/pcireg.h:
put these defs in pcireg instead
--HG--
extra : convert_revision : 5e3581b5da17410f943907139bd479f15d2231e8
dev/ns_gige.cc:
fix serialization and move regsReset into the cc file
dev/ns_gige.hh:
put regsReset into cc instead of here in hh
--HG--
extra : convert_revision : 3a8796fa583e0765503104a9dbe28cc69f1a8fa9
3) add some new functions to etherpkt. 4) checkin the nice ping_linux.ini that i've been using.
dev/etherpkt.hh:
remove the packet headers nate hated so much.
also add some new functionality regarding packets, like isIpHdr(), etc.
dev/ns_gige.cc:
improve the code given the nice new functions offered in etherpkt
--HG--
extra : convert_revision : 2e27f5a8dca5323c0fa22d3c51af44a35f6be1a2
and started cleaning up config files.
arch/alpha/isa_desc:
Made implementation of cttz and ctlz more compact
base/remote_gdb.cc:
Added comment about PALcode debugger accesses
dev/baddev.cc:
dev/baddev.hh:
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
dev/tsunami_uart.cc:
dev/tsunami_uart.hh:
Cleaned up includes and changed device from FunctionalMemory to
PioDevice for detailed boot
dev/ns_gige.cc:
The ethernet dev uses two BARs, and the first bars size was being set
incorrectly.
dev/tsunamireg.h:
I don't know why we were using the superpage as the PCI memory addr.
Changed and works correctly with detailed boot.
--HG--
extra : convert_revision : b535e76612cb90b544305dc1aa8c5e0e774564bd
dev/ide_ctrl.cc:
Properly serialize/unserialize the PciDev base class to get it to remap
the MMU
dev/ns_gige.cc:
dev/ns_gige.hh:
Remove the "addr" paramter from the constructor and change the device
to use PCI based MMU mappings only
dev/pciconfigall.cc:
Change comments
dev/pcidev.cc:
Properly setup the MMU after a serialize
--HG--
extra : convert_revision : 4b2e7ba58e3c24fac1ff6f80635e704d6ecc0eff
dev/ns_gige.cc:
remove some useless DPRINTF's and add some useful ones. fix the missing RXDESC interrupt.
--HG--
extra : convert_revision : 17142480db1eaafa24f88640f8c7b8e7e077de1a
doesn't conflict with the old ethernet driver name.
Added config file to try to boot Tru64 with Tsunami
Cleaned up kern/linux a bit more and fixed bug where we were using
Tru64 system calls
dev/ns_gige.cc:
dev/ns_gige.hh:
dev/tsunami.hh:
Changed name of lisa's device to NSgigE instead of Etherdev so it
doesn't conflict with the old ethernet driver name.
kern/linux/linux_syscalls.hh:
the Syscalls still used the Tru64 calls, oops.. fixed.
--HG--
extra : convert_revision : dedd20686cc367ed37f31920f753566afbc69045
dev/ns_gige.cc:
clear the device interrupts
dev/ns_gige_reg.h:
Add a new mask
--HG--
extra : convert_revision : ce3617315677cbee577ed8893821a8abc5a1a10d
base/range.hh:
andrew thought this might be a bug.
dev/etherpkt.cc:
don't need std:: since there is a using directive
dev/ns_gige.cc:
update to new PIO and PCI system
dev/ns_gige.hh:
update to deal with new PIO and PCI setup
dev/ns_gige_reg.h:
Add some new #defines that I ended up needing
dev/pcidev.cc:
some changes to the debugging printfs of pci device
--HG--
extra : convert_revision : 955ba8e8e1c418cfe1c6549dc3451ea091541556
