Curtis Dunham
c3268f8820
config: Support full-system with SST's memory system
...
This patch adds an example configuration in ext/sst/tests/ that allows
an SST/gem5 instance to simulate a 4-core AArch64 system with SST's
memHierarchy components providing all the caches and memories.
2015-04-08 15:56:06 -05:00
Curtis Dunham
f05cb84ed1
ext: Add SST connector
...
This patch adds a connector that allows gem5 to be used as a component
in SST (Structural Simulation Toolkit, sst-simulator.org). At a high
level, this allows memory traffic to pass between the two simulators.
SST Links are roughly analogous to gem5 Ports, although Links do not
have a notion of master and slave. This distinction is important to
gem5, so when connecting a gem5 CPU to an SST cache, an ExternalSlave
must be used, and similarly when connecting the memory side of SST cache
to a gem5 port (for memory <-> I/O), an ExternalMaster must be used.
These connectors handle the administrative aspects of gem5
(initialization, simulation, shutdown) as well as translating SST's
MemEvents into gem5 Packets and vice-versa.
2015-04-08 15:56:06 -05:00
Nilay Vaish
b5770ff5e0
stats: updates due to recent changesets.
2015-04-03 11:42:11 -05:00
Nikos Nikoleris
4bdbdd8413
dev: (un)serialize fix for the RTC and RTC Timer Interrupt events
...
Restoring from a checkpoint fails if either the RTC or the RTC Timer
Interrrupt event is disabled. The restored machine tried incorrectly
to schedule the next event with negative offset.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-04-03 11:42:10 -05:00
Ruslan Bukin
bebab7f24f
sim: correct check for endianess
...
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-04-03 11:42:10 -05:00
Ruslan Bukin
b3314673f4
dev: Extend access width for IDE control registers
...
Add 32-bit access width for PrimaryTiming register and 16bit for UDMAControl
register as FreeBSD required.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-04-03 11:42:10 -05:00
Nikos Nikoleris
305e29b98e
cpu: fix system total instructions accounting
...
The totalInstructions counter is only incremented when the whole instruction is
commited and not on every microop. It was incorrectly reset in atomic and
timing cpus.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>"
2015-04-03 11:42:10 -05:00
Lena Olson
333988a73e
x86: fix debug trace output for mwait
...
When running with the Exec flag, the mwait instruction attempted
to print out its source registers, which were never actually
initialized. This led to sporadic assertion failures when the
value stored there was invalid.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-04-03 11:42:10 -05:00
Andreas Hansson
aeffde5ed5
arm, configs: Do not forward snoops from I cache
...
This fix simply tells the I cache to not forward snoops to the fetch
unit (since there is really no reason to do so).
2015-03-27 04:56:10 -04:00
Stephan Diestelhorst
cb8856f580
mem: Support any number of master-IDs in stride prefetcher
...
The stride prefetcher had a hardcoded number of contexts (i.e. master-IDs)
that it could handle. Since master IDs need to be unique per system, and
every core, cache etc. requires a separate master port, a static limit on
these does not make much sense.
Instead, this patch adds a small hash map that will map all master IDs to
the right prefetch state and dynamically allocates new state for new master
IDs.
2015-03-27 04:56:03 -04:00
Andreas Hansson
0197e580e5
mem: Allocate cache writebacks before new MSHRs
...
This patch changes the order of writeback allocation such that any
writebacks resulting from a tag lookup (e.g. for an uncacheable
access), are added to the writebuffer before any new MSHR entries are
allocated. This ensures that the writebacks logically precedes the new
allocations.
The patch also changes the uncacheable flush to use proper timed (or
atomic) writebacks, as opposed to functional writes.
2015-03-27 04:56:02 -04:00
Andreas Hansson
24763c2177
mem: Cleanup flow for uncacheable accesses
...
This patch simplifies the code dealing with uncacheable timing
accesses, aiming to align it with the existing miss handling. Similar
to what we do in atomic, a timing request now goes through
Cache::access (where the block is also flushed), and then proceeds to
ignore any existing MSHR for the block in question. This unifies the
flow for cacheable and uncacheable accesses, and for atomic and timing.
2015-03-27 04:56:01 -04:00
Andreas Hansson
a7a1e6004a
mem: Ignore uncacheable MSHRs when finding matches
...
This patch changes how we search for matching MSHRs, ignoring any MSHR
that is allocated for an uncacheable access. By doing so, this patch
fixes a corner case in the MSHRs where incorrect data ended up being
copied into a (cacheable) read packet due to a first uncacheable MSHR
target of size 4, followed by a cacheable target to the same MSHR of
size 64. The latter target was filled with nonsense data.
2015-03-27 04:56:00 -04:00
Andreas Hansson
801ce65eae
mem: Remove redundant allocateUncachedReadBuffer in cache
...
This patch removes the no-longer-needed
allocateUncachedReadBuffer. Besides the checks it is exactly the same
as allocateMissBuffer and thus provides no value.
2015-03-27 04:55:59 -04:00
Andreas Hansson
fe806a0dd7
mem: Modernise MSHR iterators to C++11
...
This patch updates the iterators in the MSHR and MSHR queues to use
C++11 range-based for loops. It also does a bit of additional house
keeping.
2015-03-27 04:55:57 -04:00
Andreas Hansson
d5e03beac2
tests: Update stats for cache block alignment
2015-03-27 04:55:57 -04:00
Andreas Hansson
7bae98459c
mem: Align all MSHR entries to block boundaries
...
This patch aligns all MSHR queue entries to block boundaries to
simplify checks for matches. Previously there were corner cases that
could lead to existing entries not being identified as matches.
There are, rather alarmingly, a few regressions that change with this
patch.
2015-03-27 04:55:55 -04:00
Ali Jafri
15f0d9ff14
mem: Rename PREFETCH_SNOOP_SQUASH flag to BLOCK_CACHED
...
This patch subsumes the PREFETCH_SNOOP_SQUASH flag with the more
generic BLOCK_CACHED flag. Future patches implementing cache eviction
messages can use the BLOCK_CACHED flag in almost the same manner as
hardware prefetches use the PREFETCH_SNOOP_SQUASH flag. The
PREFTECH_SNOOP_FLAG is set if the prefetch target is found in the tags
or the MSHRs in any state, so we are simply replacing calls to
setPrefetchSquashed() with setBlockCached(). The case of where the
prefetch target is found in the writeback MSHRs of upper level caches
continues to be covered by the MEM_INHIBIT flag.
2015-03-27 04:55:54 -04:00
Curtis Dunham
a1164154de
sim: Update limit_event reuse to final version
...
Matching final version on reviewboard.
2015-03-26 11:16:44 -04:00
Andreas Hansson
a196dbe3bf
cpu: Fix InstPBTrace inheritance
...
This patch fixes an issue that prevented gem5 to be built with C++
config and without Python.
2015-03-26 11:16:43 -04:00
Steve Reinhardt
6677b9122a
mem: rename Locked/LOCKED to LockedRMW/LOCKED_RMW
...
Makes x86-style locked operations even more distinct from
LLSC operations. Using "locked" by itself should be
obviously ambiguous now.
2015-03-23 16:14:20 -07:00
Steve Reinhardt
c55749d998
config: expand '~' and '~user' in paths
2015-03-23 16:14:19 -07:00
Steve Reinhardt
5302305255
misc: quote args in echoed command line
...
Currently if there are shell special characters in a
command-line argument, you can't copy and paste the
echoed command line onto a shell prompt because the
characters aren't quoted properly. This patch fixes
that problem.
2015-03-23 16:14:18 -07:00
Curtis Dunham
bcea57afc3
config: Add ability to exit simulation after initialization
...
When using gem5 as a slave simulator, it will not advance the
clock on its own and depends on the master simulator calling
simulate(). This new option lets us use the Python scripts
to do all the configuration while stopping short of actually
simulating anything.
2015-03-23 06:57:38 -04:00
Curtis Dunham
564482c782
sim: Reuse the same limit_event in simulate()
...
This patch accomplishes two things:
1. Makes simulate()'s GlobalSimLoopExitEvent a singleton reused
across calls. This is slightly more efficient than recreating
it every time.
2. Gives callers to simulate() (especially other simulators) a
foolproof way of knowing that the simulation period ended
successfully by hitting the limit event. They can call
getLimitEvent() and compare it to the return
value of simulate().
This change was motivated by an ongoing effort to integrate gem5
and SST, with SST as the master sim and gem5 as the slave sim.
2015-03-23 06:57:36 -04:00
Andreas Hansson
45286d9b64
mem: Tidy up Request
...
This patch does a bit of house keeping, fixing up typos, removing dead
code etc.
2015-03-23 06:57:34 -04:00
Andreas Hansson
ed08dc31ba
tests: Final reclassification of quick regressions
...
A few regressions were still considered long, but finished well within
the 180 seconds. They are only a handful (mostly mcf in atomic).
--HG--
rename : tests/long/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/config.ini => tests/quick/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/config.ini
rename : tests/long/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/simerr => tests/quick/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/simerr
rename : tests/long/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/simout => tests/quick/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/simout
rename : tests/long/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/stats.txt => tests/quick/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/stats.txt
rename : tests/long/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/system.terminal => tests/quick/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/system.terminal
rename : tests/long/se/10.mcf/ref/arm/linux/simple-atomic/chair.cook.ppm => tests/quick/se/10.mcf/ref/arm/linux/simple-atomic/chair.cook.ppm
rename : tests/long/se/10.mcf/ref/arm/linux/simple-atomic/config.ini => tests/quick/se/10.mcf/ref/arm/linux/simple-atomic/config.ini
rename : tests/long/se/10.mcf/ref/arm/linux/simple-atomic/mcf.out => tests/quick/se/10.mcf/ref/arm/linux/simple-atomic/mcf.out
rename : tests/long/se/10.mcf/ref/arm/linux/simple-atomic/simerr => tests/quick/se/10.mcf/ref/arm/linux/simple-atomic/simerr
rename : tests/long/se/10.mcf/ref/arm/linux/simple-atomic/simout => tests/quick/se/10.mcf/ref/arm/linux/simple-atomic/simout
rename : tests/long/se/10.mcf/ref/arm/linux/simple-atomic/stats.txt => tests/quick/se/10.mcf/ref/arm/linux/simple-atomic/stats.txt
rename : tests/long/se/10.mcf/ref/arm/linux/simple-timing/chair.cook.ppm => tests/quick/se/10.mcf/ref/arm/linux/simple-timing/chair.cook.ppm
rename : tests/long/se/10.mcf/ref/arm/linux/simple-timing/config.ini => tests/quick/se/10.mcf/ref/arm/linux/simple-timing/config.ini
rename : tests/long/se/10.mcf/ref/arm/linux/simple-timing/mcf.out => tests/quick/se/10.mcf/ref/arm/linux/simple-timing/mcf.out
rename : tests/long/se/10.mcf/ref/arm/linux/simple-timing/simerr => tests/quick/se/10.mcf/ref/arm/linux/simple-timing/simerr
rename : tests/long/se/10.mcf/ref/arm/linux/simple-timing/simout => tests/quick/se/10.mcf/ref/arm/linux/simple-timing/simout
rename : tests/long/se/10.mcf/ref/arm/linux/simple-timing/stats.txt => tests/quick/se/10.mcf/ref/arm/linux/simple-timing/stats.txt
rename : tests/long/se/10.mcf/ref/sparc/linux/simple-atomic/config.ini => tests/quick/se/10.mcf/ref/sparc/linux/simple-atomic/config.ini
rename : tests/long/se/10.mcf/ref/sparc/linux/simple-atomic/mcf.out => tests/quick/se/10.mcf/ref/sparc/linux/simple-atomic/mcf.out
rename : tests/long/se/10.mcf/ref/sparc/linux/simple-atomic/simerr => tests/quick/se/10.mcf/ref/sparc/linux/simple-atomic/simerr
rename : tests/long/se/10.mcf/ref/sparc/linux/simple-atomic/simout => tests/quick/se/10.mcf/ref/sparc/linux/simple-atomic/simout
rename : tests/long/se/10.mcf/ref/sparc/linux/simple-atomic/stats.txt => tests/quick/se/10.mcf/ref/sparc/linux/simple-atomic/stats.txt
rename : tests/long/se/10.mcf/ref/x86/linux/simple-atomic/config.ini => tests/quick/se/10.mcf/ref/x86/linux/simple-atomic/config.ini
rename : tests/long/se/10.mcf/ref/x86/linux/simple-atomic/mcf.out => tests/quick/se/10.mcf/ref/x86/linux/simple-atomic/mcf.out
rename : tests/long/se/10.mcf/ref/x86/linux/simple-atomic/simerr => tests/quick/se/10.mcf/ref/x86/linux/simple-atomic/simerr
rename : tests/long/se/10.mcf/ref/x86/linux/simple-atomic/simout => tests/quick/se/10.mcf/ref/x86/linux/simple-atomic/simout
rename : tests/long/se/10.mcf/ref/x86/linux/simple-atomic/stats.txt => tests/quick/se/10.mcf/ref/x86/linux/simple-atomic/stats.txt
rename : tests/long/se/10.mcf/test.py => tests/quick/se/10.mcf/test.py
rename : tests/long/se/30.eon/ref/alpha/tru64/simple-atomic/config.ini => tests/quick/se/30.eon/ref/alpha/tru64/simple-atomic/config.ini
rename : tests/long/se/30.eon/ref/alpha/tru64/simple-atomic/simerr => tests/quick/se/30.eon/ref/alpha/tru64/simple-atomic/simerr
rename : tests/long/se/30.eon/ref/alpha/tru64/simple-atomic/simout => tests/quick/se/30.eon/ref/alpha/tru64/simple-atomic/simout
rename : tests/long/se/30.eon/ref/alpha/tru64/simple-atomic/stats.txt => tests/quick/se/30.eon/ref/alpha/tru64/simple-atomic/stats.txt
rename : tests/long/se/30.eon/test.py => tests/quick/se/30.eon/test.py
2015-03-23 06:57:31 -04:00
Steve Reinhardt
1483496803
stats: update Minor stats due to PF bug fix
...
A recent changeset of mine (http://repo.gem5.org/gem5/rev/4cfe55719da5 )
inadvertently fixed a bug in the Minor CPU model which caused it to treat
software prefetches as regular loads. Prior to this changeset, Minor
did an ad-hoc generation of memory commands that left out the PF check;
because it now uses the common code that the other CPU models use,
it generates prefetches properly. These stat changes reflect the fact
that the Minor model now issues SoftPFReqs.
2015-03-19 08:41:32 -04:00
Andreas Hansson
f1c3fda965
tests: Recategorise regressions based on run time
...
This patch takes a first stab at recategorising the regression tests
based on actual run times. The simple-atomic and simple-timing runs of
vortex and twolf all finish in less than 180 s, and they are
consequently moved from long to quick. All realview64 linux-boot
regressions take more than 700 s, and they are therefore moved to
long.
Later patches will rename quick to short, and further divide the
regressions into short, medium and long.
--HG--
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic-dual/config.ini => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic-dual/config.ini
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic-dual/simerr => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic-dual/simerr
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic-dual/simout => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic-dual/simout
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic-dual/stats.txt => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic-dual/stats.txt
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic-dual/system.terminal => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic-dual/system.terminal
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic/config.ini => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic/config.ini
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic/simerr => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic/simerr
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic/simout => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic/simout
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic/stats.txt => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic/stats.txt
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic/system.terminal => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-atomic/system.terminal
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing-dual/config.ini => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing-dual/config.ini
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing-dual/simerr => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing-dual/simerr
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing-dual/simout => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing-dual/simout
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing-dual/stats.txt => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing-dual/stats.txt
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing-dual/system.terminal => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing-dual/system.terminal
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing/config.ini => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing/config.ini
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing/simerr => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing/simerr
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing/simout => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing/simout
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing/stats.txt => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing/stats.txt
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing/system.terminal => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-simple-timing/system.terminal
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-switcheroo-atomic/config.ini => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-switcheroo-atomic/config.ini
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-switcheroo-atomic/simerr => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-switcheroo-atomic/simerr
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-switcheroo-atomic/simout => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-switcheroo-atomic/simout
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-switcheroo-atomic/stats.txt => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-switcheroo-atomic/stats.txt
rename : tests/quick/fs/10.linux-boot/ref/arm/linux/realview64-switcheroo-atomic/system.terminal => tests/long/fs/10.linux-boot/ref/arm/linux/realview64-switcheroo-atomic/system.terminal
rename : tests/long/se/50.vortex/ref/alpha/tru64/simple-atomic/config.ini => tests/quick/se/50.vortex/ref/alpha/tru64/simple-atomic/config.ini
rename : tests/long/se/50.vortex/ref/alpha/tru64/simple-atomic/simerr => tests/quick/se/50.vortex/ref/alpha/tru64/simple-atomic/simerr
rename : tests/long/se/50.vortex/ref/alpha/tru64/simple-atomic/simout => tests/quick/se/50.vortex/ref/alpha/tru64/simple-atomic/simout
rename : tests/long/se/50.vortex/ref/alpha/tru64/simple-atomic/smred.msg => tests/quick/se/50.vortex/ref/alpha/tru64/simple-atomic/smred.msg
rename : tests/long/se/50.vortex/ref/alpha/tru64/simple-atomic/smred.out => tests/quick/se/50.vortex/ref/alpha/tru64/simple-atomic/smred.out
rename : tests/long/se/50.vortex/ref/alpha/tru64/simple-atomic/stats.txt => tests/quick/se/50.vortex/ref/alpha/tru64/simple-atomic/stats.txt
rename : tests/long/se/50.vortex/ref/alpha/tru64/simple-timing/config.ini => tests/quick/se/50.vortex/ref/alpha/tru64/simple-timing/config.ini
rename : tests/long/se/50.vortex/ref/alpha/tru64/simple-timing/simerr => tests/quick/se/50.vortex/ref/alpha/tru64/simple-timing/simerr
rename : tests/long/se/50.vortex/ref/alpha/tru64/simple-timing/simout => tests/quick/se/50.vortex/ref/alpha/tru64/simple-timing/simout
rename : tests/long/se/50.vortex/ref/alpha/tru64/simple-timing/smred.msg => tests/quick/se/50.vortex/ref/alpha/tru64/simple-timing/smred.msg
rename : tests/long/se/50.vortex/ref/alpha/tru64/simple-timing/smred.out => tests/quick/se/50.vortex/ref/alpha/tru64/simple-timing/smred.out
rename : tests/long/se/50.vortex/ref/alpha/tru64/simple-timing/stats.txt => tests/quick/se/50.vortex/ref/alpha/tru64/simple-timing/stats.txt
rename : tests/long/se/50.vortex/ref/arm/linux/simple-atomic/config.ini => tests/quick/se/50.vortex/ref/arm/linux/simple-atomic/config.ini
rename : tests/long/se/50.vortex/ref/arm/linux/simple-atomic/simerr => tests/quick/se/50.vortex/ref/arm/linux/simple-atomic/simerr
rename : tests/long/se/50.vortex/ref/arm/linux/simple-atomic/simout => tests/quick/se/50.vortex/ref/arm/linux/simple-atomic/simout
rename : tests/long/se/50.vortex/ref/arm/linux/simple-atomic/smred.out => tests/quick/se/50.vortex/ref/arm/linux/simple-atomic/smred.out
rename : tests/long/se/50.vortex/ref/arm/linux/simple-atomic/stats.txt => tests/quick/se/50.vortex/ref/arm/linux/simple-atomic/stats.txt
rename : tests/long/se/50.vortex/ref/arm/linux/simple-timing/config.ini => tests/quick/se/50.vortex/ref/arm/linux/simple-timing/config.ini
rename : tests/long/se/50.vortex/ref/arm/linux/simple-timing/simerr => tests/quick/se/50.vortex/ref/arm/linux/simple-timing/simerr
rename : tests/long/se/50.vortex/ref/arm/linux/simple-timing/simout => tests/quick/se/50.vortex/ref/arm/linux/simple-timing/simout
rename : tests/long/se/50.vortex/ref/arm/linux/simple-timing/smred.out => tests/quick/se/50.vortex/ref/arm/linux/simple-timing/smred.out
rename : tests/long/se/50.vortex/ref/arm/linux/simple-timing/stats.txt => tests/quick/se/50.vortex/ref/arm/linux/simple-timing/stats.txt
rename : tests/long/se/50.vortex/ref/sparc/linux/simple-atomic/config.ini => tests/quick/se/50.vortex/ref/sparc/linux/simple-atomic/config.ini
rename : tests/long/se/50.vortex/ref/sparc/linux/simple-atomic/simerr => tests/quick/se/50.vortex/ref/sparc/linux/simple-atomic/simerr
rename : tests/long/se/50.vortex/ref/sparc/linux/simple-atomic/simout => tests/quick/se/50.vortex/ref/sparc/linux/simple-atomic/simout
rename : tests/long/se/50.vortex/ref/sparc/linux/simple-atomic/smred.msg => tests/quick/se/50.vortex/ref/sparc/linux/simple-atomic/smred.msg
rename : tests/long/se/50.vortex/ref/sparc/linux/simple-atomic/smred.out => tests/quick/se/50.vortex/ref/sparc/linux/simple-atomic/smred.out
rename : tests/long/se/50.vortex/ref/sparc/linux/simple-atomic/stats.txt => tests/quick/se/50.vortex/ref/sparc/linux/simple-atomic/stats.txt
rename : tests/long/se/50.vortex/ref/sparc/linux/simple-timing/config.ini => tests/quick/se/50.vortex/ref/sparc/linux/simple-timing/config.ini
rename : tests/long/se/50.vortex/ref/sparc/linux/simple-timing/simerr => tests/quick/se/50.vortex/ref/sparc/linux/simple-timing/simerr
rename : tests/long/se/50.vortex/ref/sparc/linux/simple-timing/simout => tests/quick/se/50.vortex/ref/sparc/linux/simple-timing/simout
rename : tests/long/se/50.vortex/ref/sparc/linux/simple-timing/smred.msg => tests/quick/se/50.vortex/ref/sparc/linux/simple-timing/smred.msg
rename : tests/long/se/50.vortex/ref/sparc/linux/simple-timing/smred.out => tests/quick/se/50.vortex/ref/sparc/linux/simple-timing/smred.out
rename : tests/long/se/50.vortex/ref/sparc/linux/simple-timing/stats.txt => tests/quick/se/50.vortex/ref/sparc/linux/simple-timing/stats.txt
rename : tests/long/se/50.vortex/test.py => tests/quick/se/50.vortex/test.py
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-atomic/config.ini => tests/quick/se/70.twolf/ref/alpha/tru64/simple-atomic/config.ini
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-atomic/simerr => tests/quick/se/70.twolf/ref/alpha/tru64/simple-atomic/simerr
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-atomic/simout => tests/quick/se/70.twolf/ref/alpha/tru64/simple-atomic/simout
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-atomic/smred.out => tests/quick/se/70.twolf/ref/alpha/tru64/simple-atomic/smred.out
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-atomic/smred.pin => tests/quick/se/70.twolf/ref/alpha/tru64/simple-atomic/smred.pin
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-atomic/smred.pl1 => tests/quick/se/70.twolf/ref/alpha/tru64/simple-atomic/smred.pl1
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-atomic/smred.pl2 => tests/quick/se/70.twolf/ref/alpha/tru64/simple-atomic/smred.pl2
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-atomic/smred.sav => tests/quick/se/70.twolf/ref/alpha/tru64/simple-atomic/smred.sav
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-atomic/smred.sv2 => tests/quick/se/70.twolf/ref/alpha/tru64/simple-atomic/smred.sv2
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-atomic/smred.twf => tests/quick/se/70.twolf/ref/alpha/tru64/simple-atomic/smred.twf
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-atomic/stats.txt => tests/quick/se/70.twolf/ref/alpha/tru64/simple-atomic/stats.txt
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-timing/config.ini => tests/quick/se/70.twolf/ref/alpha/tru64/simple-timing/config.ini
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-timing/simerr => tests/quick/se/70.twolf/ref/alpha/tru64/simple-timing/simerr
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-timing/simout => tests/quick/se/70.twolf/ref/alpha/tru64/simple-timing/simout
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-timing/smred.out => tests/quick/se/70.twolf/ref/alpha/tru64/simple-timing/smred.out
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-timing/smred.pin => tests/quick/se/70.twolf/ref/alpha/tru64/simple-timing/smred.pin
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-timing/smred.pl1 => tests/quick/se/70.twolf/ref/alpha/tru64/simple-timing/smred.pl1
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-timing/smred.pl2 => tests/quick/se/70.twolf/ref/alpha/tru64/simple-timing/smred.pl2
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-timing/smred.sav => tests/quick/se/70.twolf/ref/alpha/tru64/simple-timing/smred.sav
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-timing/smred.sv2 => tests/quick/se/70.twolf/ref/alpha/tru64/simple-timing/smred.sv2
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-timing/smred.twf => tests/quick/se/70.twolf/ref/alpha/tru64/simple-timing/smred.twf
rename : tests/long/se/70.twolf/ref/alpha/tru64/simple-timing/stats.txt => tests/quick/se/70.twolf/ref/alpha/tru64/simple-timing/stats.txt
rename : tests/long/se/70.twolf/ref/arm/linux/simple-atomic/config.ini => tests/quick/se/70.twolf/ref/arm/linux/simple-atomic/config.ini
rename : tests/long/se/70.twolf/ref/arm/linux/simple-atomic/simerr => tests/quick/se/70.twolf/ref/arm/linux/simple-atomic/simerr
rename : tests/long/se/70.twolf/ref/arm/linux/simple-atomic/simout => tests/quick/se/70.twolf/ref/arm/linux/simple-atomic/simout
rename : tests/long/se/70.twolf/ref/arm/linux/simple-atomic/smred.out => tests/quick/se/70.twolf/ref/arm/linux/simple-atomic/smred.out
rename : tests/long/se/70.twolf/ref/arm/linux/simple-atomic/stats.txt => tests/quick/se/70.twolf/ref/arm/linux/simple-atomic/stats.txt
rename : tests/long/se/70.twolf/ref/arm/linux/simple-timing/config.ini => tests/quick/se/70.twolf/ref/arm/linux/simple-timing/config.ini
rename : tests/long/se/70.twolf/ref/arm/linux/simple-timing/simerr => tests/quick/se/70.twolf/ref/arm/linux/simple-timing/simerr
rename : tests/long/se/70.twolf/ref/arm/linux/simple-timing/simout => tests/quick/se/70.twolf/ref/arm/linux/simple-timing/simout
rename : tests/long/se/70.twolf/ref/arm/linux/simple-timing/smred.out => tests/quick/se/70.twolf/ref/arm/linux/simple-timing/smred.out
rename : tests/long/se/70.twolf/ref/arm/linux/simple-timing/stats.txt => tests/quick/se/70.twolf/ref/arm/linux/simple-timing/stats.txt
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-atomic/config.ini => tests/quick/se/70.twolf/ref/sparc/linux/simple-atomic/config.ini
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-atomic/simerr => tests/quick/se/70.twolf/ref/sparc/linux/simple-atomic/simerr
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-atomic/simout => tests/quick/se/70.twolf/ref/sparc/linux/simple-atomic/simout
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-atomic/smred.out => tests/quick/se/70.twolf/ref/sparc/linux/simple-atomic/smred.out
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-atomic/smred.pin => tests/quick/se/70.twolf/ref/sparc/linux/simple-atomic/smred.pin
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-atomic/smred.pl1 => tests/quick/se/70.twolf/ref/sparc/linux/simple-atomic/smred.pl1
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-atomic/smred.pl2 => tests/quick/se/70.twolf/ref/sparc/linux/simple-atomic/smred.pl2
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-atomic/smred.sav => tests/quick/se/70.twolf/ref/sparc/linux/simple-atomic/smred.sav
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-atomic/smred.sv2 => tests/quick/se/70.twolf/ref/sparc/linux/simple-atomic/smred.sv2
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-atomic/smred.twf => tests/quick/se/70.twolf/ref/sparc/linux/simple-atomic/smred.twf
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-atomic/stats.txt => tests/quick/se/70.twolf/ref/sparc/linux/simple-atomic/stats.txt
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-timing/config.ini => tests/quick/se/70.twolf/ref/sparc/linux/simple-timing/config.ini
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-timing/simerr => tests/quick/se/70.twolf/ref/sparc/linux/simple-timing/simerr
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-timing/simout => tests/quick/se/70.twolf/ref/sparc/linux/simple-timing/simout
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-timing/smred.out => tests/quick/se/70.twolf/ref/sparc/linux/simple-timing/smred.out
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-timing/smred.pin => tests/quick/se/70.twolf/ref/sparc/linux/simple-timing/smred.pin
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-timing/smred.pl1 => tests/quick/se/70.twolf/ref/sparc/linux/simple-timing/smred.pl1
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-timing/smred.pl2 => tests/quick/se/70.twolf/ref/sparc/linux/simple-timing/smred.pl2
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-timing/smred.sav => tests/quick/se/70.twolf/ref/sparc/linux/simple-timing/smred.sav
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-timing/smred.sv2 => tests/quick/se/70.twolf/ref/sparc/linux/simple-timing/smred.sv2
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-timing/smred.twf => tests/quick/se/70.twolf/ref/sparc/linux/simple-timing/smred.twf
rename : tests/long/se/70.twolf/ref/sparc/linux/simple-timing/stats.txt => tests/quick/se/70.twolf/ref/sparc/linux/simple-timing/stats.txt
rename : tests/long/se/70.twolf/ref/x86/linux/simple-atomic/config.ini => tests/quick/se/70.twolf/ref/x86/linux/simple-atomic/config.ini
rename : tests/long/se/70.twolf/ref/x86/linux/simple-atomic/simerr => tests/quick/se/70.twolf/ref/x86/linux/simple-atomic/simerr
rename : tests/long/se/70.twolf/ref/x86/linux/simple-atomic/simout => tests/quick/se/70.twolf/ref/x86/linux/simple-atomic/simout
rename : tests/long/se/70.twolf/ref/x86/linux/simple-atomic/smred.out => tests/quick/se/70.twolf/ref/x86/linux/simple-atomic/smred.out
rename : tests/long/se/70.twolf/ref/x86/linux/simple-atomic/smred.pin => tests/quick/se/70.twolf/ref/x86/linux/simple-atomic/smred.pin
rename : tests/long/se/70.twolf/ref/x86/linux/simple-atomic/smred.pl1 => tests/quick/se/70.twolf/ref/x86/linux/simple-atomic/smred.pl1
rename : tests/long/se/70.twolf/ref/x86/linux/simple-atomic/smred.pl2 => tests/quick/se/70.twolf/ref/x86/linux/simple-atomic/smred.pl2
rename : tests/long/se/70.twolf/ref/x86/linux/simple-atomic/smred.sav => tests/quick/se/70.twolf/ref/x86/linux/simple-atomic/smred.sav
rename : tests/long/se/70.twolf/ref/x86/linux/simple-atomic/smred.sv2 => tests/quick/se/70.twolf/ref/x86/linux/simple-atomic/smred.sv2
rename : tests/long/se/70.twolf/ref/x86/linux/simple-atomic/smred.twf => tests/quick/se/70.twolf/ref/x86/linux/simple-atomic/smred.twf
rename : tests/long/se/70.twolf/ref/x86/linux/simple-atomic/stats.txt => tests/quick/se/70.twolf/ref/x86/linux/simple-atomic/stats.txt
rename : tests/long/se/70.twolf/ref/x86/linux/simple-timing/config.ini => tests/quick/se/70.twolf/ref/x86/linux/simple-timing/config.ini
rename : tests/long/se/70.twolf/ref/x86/linux/simple-timing/simerr => tests/quick/se/70.twolf/ref/x86/linux/simple-timing/simerr
rename : tests/long/se/70.twolf/ref/x86/linux/simple-timing/simout => tests/quick/se/70.twolf/ref/x86/linux/simple-timing/simout
rename : tests/long/se/70.twolf/ref/x86/linux/simple-timing/smred.out => tests/quick/se/70.twolf/ref/x86/linux/simple-timing/smred.out
rename : tests/long/se/70.twolf/ref/x86/linux/simple-timing/smred.pin => tests/quick/se/70.twolf/ref/x86/linux/simple-timing/smred.pin
rename : tests/long/se/70.twolf/ref/x86/linux/simple-timing/smred.pl1 => tests/quick/se/70.twolf/ref/x86/linux/simple-timing/smred.pl1
rename : tests/long/se/70.twolf/ref/x86/linux/simple-timing/smred.pl2 => tests/quick/se/70.twolf/ref/x86/linux/simple-timing/smred.pl2
rename : tests/long/se/70.twolf/ref/x86/linux/simple-timing/smred.sav => tests/quick/se/70.twolf/ref/x86/linux/simple-timing/smred.sav
rename : tests/long/se/70.twolf/ref/x86/linux/simple-timing/smred.sv2 => tests/quick/se/70.twolf/ref/x86/linux/simple-timing/smred.sv2
rename : tests/long/se/70.twolf/ref/x86/linux/simple-timing/smred.twf => tests/quick/se/70.twolf/ref/x86/linux/simple-timing/smred.twf
rename : tests/long/se/70.twolf/ref/x86/linux/simple-timing/stats.txt => tests/quick/se/70.twolf/ref/x86/linux/simple-timing/stats.txt
rename : tests/long/se/70.twolf/test.py => tests/quick/se/70.twolf/test.py
2015-03-19 04:06:21 -04:00
Andreas Sandberg
877435950c
test, arm: Add scripts to test checkpoints
...
Add a set of scripts to automatically test checkpointing in the
regression framework. The checkpointing tests are similar to the
switcheroo tests, but instead of switching between CPUs, they
checkpoint the system and restore from the checkpoint again. This is
done at regular intervals, typically while booting Linux.
The implementation is fairly straight forward, with the exception that
we have to work around gem5's inability to restore from a checkpoint
after a system has been instantiated. We work around this by forking
off child processes that does the actual simulation and never
instantiate a system in the parent process unless a maximum checkpoint
count is reached (in which case we just simulate the system to
completion in the parent).
Checkpoint testing is currently only enabled 32- and 64-bit ARM
systems using atomic CPUs.
Note: An unfortunate side-effect of forking is that every new process
will overwrite the stats and terminal output from the previous
process. This means that the output directory only contains data from
the last checkpoint.
2015-03-19 04:06:20 -04:00
Andreas Hansson
ecd4bad351
config: Add soak test for memtest.py
...
This patch adds a random option to memtest.py which allows the user to
easily test valid random tree topologies. The patch also adds a
wrapper script to run soak tests using the newly introduced option.
We also adjust the progress interval and progress limit check to make
the output less noisy, and avoid false positives.
Bring on the pain.
2015-03-19 04:06:18 -04:00
Matt Evans
1ccc3d7e5b
arm: Add a GICv2m device
...
This patch adds a new PIO-accessible GICv2m shim. This shim has a PIO
slave port on one side, and SPI 'wires' on the other. It accepts MSIs
from the system and triggers SPIs on the GIC. It is configurable with
a number of frames, each of which has a number of SPIs and a base SPI
offset.
A Linux driver for GICv2m is available upstream.
2015-03-19 04:06:17 -04:00
Matt Evans
ec80224188
arm: Remove the 'magic MSI register' in the GIC (PL390)
...
This patch removes the code that added this magic register. A
follow-up patch provides a GICv2m MSI shim that gives the same
functionality in a standard ARM system architecture way.
2015-03-19 04:06:16 -04:00
Chris Emmons
142ab40c4b
config: Specify OS type and release on command line
...
This patch enables users to speficy --os-type on the command
line. This option is used to take specific actions for an OS type,
such as changing the kernel command line. This patch is part of the
Android KitKat enablement.
2015-03-19 04:06:14 -04:00
Wendy Elsasser
9b4d8030e6
cpu: Fix TrafficGen message format
...
Fix erroneous message format for fatal error.
Previously, code did not have type indicator (% instead of %d).
Also removed redundant fatal check.
Ran modified sweep.py with in range and out of range values to test.
2015-03-19 04:06:12 -04:00
Andreas Hansson
5275c9d740
mem: Use emplace front/back for deferred packets
...
Embrace C++11 for the deferred packets as we actually store the
objects in the data structure, and not just pointers.
2015-03-19 04:06:11 -04:00
Geoffrey Blake
1d403960af
mem: Enable CommMonitor to output traces in atomic mode
...
The CommMonitor by default only allows memory traces to be gathered in
timing mode. This patch allows memory traces to be gathered in atomic
mode if all one needs is a functional trace of memory addresses used
and timing information is of a secondary concern.
2015-03-19 04:06:10 -04:00
Andreas Hansson
40e678069f
config: Fix DRAM rank option in sweep script
...
Align with changes in the common bits.
2015-03-19 04:06:08 -04:00
Andreas Hansson
2626effdf2
tests: Bump timeout to 5 hours
...
Align with observed run-times just above 4 hours for some hosts.
2015-03-19 04:06:07 -04:00
Steve Reinhardt
e57ab463cf
mem: remove redundant test in in Cache::recvTimingResp()
...
For some reason we were checking mshr->hasTargets() even though
we had already called mshr->getTarget() unconditionally earlier
in the same function (which asserts if there are no targets).
Get rid of this useless check, and while we're at it get rid
of the redundant call to mshr->getTarget(), since we still have
the value saved in a local var.
2015-02-11 10:48:53 -08:00
Steve Reinhardt
89bb03a1a6
mem: add local var in Cache::recvTimingResp()
...
The main loop in recvTimingResp() uses target->pkt all over
the place. Create a local tgt_pkt to help keep lines
under the line length limit.
2015-02-11 10:48:52 -08:00
Steve Reinhardt
ee0b52404c
mem: restructure Packet cmd initialization a bit more
...
Refactor the way that specific MemCmd values are generated for packets.
The new approach is a little more elegant in that we assign the right
value up front, and it's also more amenable to non-heap-allocated
Packet objects.
Also replaced the code in the Minor model that was still doing it the
ad-hoc way.
This is basically a refinement of http://repo.gem5.org/gem5/rev/711eb0e64249 .
2015-02-11 10:48:50 -08:00
Steve Reinhardt
ccef61d1cc
mem: clean up write buffer check in Cache::handleSnoop()
...
The 'if (writebacks.size)' check was redundant, because
writeBuffer.findMatches() would return false if the
writebacks list was empty.
Also renamed 'mshr' to 'wb_entry' in this context since
we are pointing at a writebuffer entry and not an MSHR
(even though it's the same C++ class).
2015-03-14 06:51:07 -07:00
Nilay Vaish
7902e5778f
tests: remove not maintained 20.eio-short detailed test
2015-03-09 09:39:09 -05:00
Nilay Vaish
99fb8f8140
stats: changes to due to recent set of patches
2015-03-09 09:39:09 -05:00
Rizwana Begum
0c8e025c3b
config: Fix for 'android' lookup in disk name
...
This patch modifies FSConfig.py to look for 'android' only in disk
image name. Before this patch, 'android' was searched in full
disk path.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-03-09 09:39:08 -05:00
Nilay Vaish
e5fbc67e16
cpu: o3: another assert instead of check
2015-03-09 09:39:08 -05:00
Nilay Vaish
5003ed5f7a
cpu: o3: Remove unused code in iew, add assert instead.
2015-03-09 09:39:08 -05:00
Nilay Vaish
4e1d10a3cf
cpu: o3: commit: mark pipeline delay variable as consts
2015-03-09 09:39:08 -05:00
Nilay Vaish
53de2512b1
cpu: o3: remove unused stat variables.
2015-03-09 09:39:08 -05:00