Commit graph

149 commits

Author SHA1 Message Date
Lisa Hsu
5d42fd836b Merge zizzer:/bk/newmem
into  zed.eecs.umich.edu:/z/hsul/work/sparc/m5

--HG--
extra : convert_revision : 6e58629b1e51f1fc493a89f16c3f2e676dc5d191
2006-12-12 21:19:51 -05:00
Ali Saidi
ed22eb781d get legion/m5 to first tlb miss fault
src/arch/sparc/asi.cc:
src/arch/sparc/asi.hh:
    add sparc error asi
src/arch/sparc/faults.cc:
    put a panic in if TL == MaxTL
src/arch/sparc/isa/decoder.isa:
    Hpstate needs to be updated on a done too
src/arch/sparc/miscregfile.cc:
    warn istead of panicing of fprs/fsr accesses
src/arch/sparc/tlb.cc:
    add sparc error register code that just does nothing
    fix a couple of other tlb bugs
src/arch/sparc/ua2005.cc:
    fix implementation of HPSTATE  write
src/cpu/exetrace.cc:
    let exectrate mess up a couple of times before dying
src/python/m5/objects/T1000.py:
    add l2 error status register fake devices

--HG--
extra : convert_revision : ed5dfdfb28633bf36e5ae07d244f7510a02874ca
2006-12-07 18:50:33 -05:00
Ali Saidi
92c5a5c8cb More changes to get SPARC fs closer. Now at 1.2M cycles before difference
configs/common/FSConfig.py:
    seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
    change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
    For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
    Use instruction count from cpu rather than cycles because that is what legion does
    we can change it back after were done with legion
src/base/bitfield.hh:
    add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
    add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
    compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
    change asserts of packet success to if panics wrapped with NDEBUG defines
    so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
    expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
    convert some tabs to spaces
src/python/m5/objects/T1000.py:
    add more fake devices for each l1 bank and each memory controller

--HG--
extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
2006-12-04 00:54:40 -05:00
Steve Reinhardt
e6d7e8af21 Support better param conversions to/from numeric subclasses.
--HG--
extra : convert_revision : 2ccb75b0912a384789458710fd9bbb65626f839e
2006-12-02 22:24:52 -08:00
Steve Reinhardt
4c0014a187 Fix help strings on GenRepl params.
--HG--
extra : convert_revision : 520814e193b9e86b6410f3ab98d62ed131d295aa
2006-12-02 22:23:46 -08:00
Ali Saidi
8c4f7a0404 Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
Add the ability to use an address mask for symbol loading
Rather then silently failing on platform accesses panic
Move BadAddr/IsaFake no Device from Tsunami
Let the system kernel be none, but warn about it

configs/common/FSConfig.py:
    We don't have a kernel for sparc yet
src/arch/sparc/system.cc:
    Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
src/base/loader/aout_object.cc:
src/base/loader/aout_object.hh:
src/base/loader/ecoff_object.cc:
src/base/loader/ecoff_object.hh:
src/base/loader/elf_object.cc:
src/base/loader/elf_object.hh:
src/base/loader/object_file.hh:
src/base/loader/raw_object.cc:
src/base/loader/raw_object.hh:
    Add the ability to use an address mask for symbol loading
src/dev/sparc/t1000.cc:
    Rather then silently failing on platform accesses panic
src/dev/sparc/t1000.hh:
    fix up a couple of platform comments
src/python/m5/objects/Bus.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/T1000.py:
src/python/m5/objects/Tsunami.py:
    Move BadAddr/IsaFake no Device from Tsunami
src/python/m5/objects/System.py:
    Let kernel be none
src/sim/system.cc:
    Let the system kernel be none, but warn about it

--HG--
extra : convert_revision : 92f6afef599a3d3c7c5026d03434102c41c7b5f4
2006-11-30 15:51:54 -05:00
Gabe Black
f85082e0a0 Added a parameter to set memory to zero. This is to support Legion, and once we can make our own hypervisor binary, we probably won't need it.
--HG--
extra : convert_revision : 168883e4a5d3760962cd9759a6f41c66f5a6402a
2006-11-22 23:09:27 -05:00
Gabe Black
0a99750ebf Merge zizzer:/bk/sparcfs
into  zower.eecs.umich.edu:/eecshome/m5/newmem

--HG--
extra : convert_revision : 75f3398e38e18eb1f8248e23708d7a8d8cce0fc5
2006-11-22 15:45:32 -05:00
Gabe Black
cd2727694d Add in rom/rams for the nvram, hypervisor description, and partition description.
--HG--
extra : convert_revision : a49de5fcfbea307c971964b8a68b95eb5d9a2bf4
2006-11-20 17:59:35 -05:00
Nathan Binkert
31d829d388 Implement current working directory for LiveProcesses
--HG--
extra : convert_revision : a2d3cf29ab65c61af27d82a8c421a41a19fd5aeb
2006-11-16 12:43:11 -08:00
Gabe Black
74654ddd1f Merge zower.eecs.umich.edu:/home/gblack/m5/newmemmemops
into  zower.eecs.umich.edu:/eecshome/m5/newmem

--HG--
extra : convert_revision : 74b2352b8f088e38cd1ecf3a8233b45df0476d93
2006-11-16 14:42:44 -05:00
Gabe Black
14ebaa1ecc Merge zizzer.eecs.umich.edu:/bk/newmem/
into  zower.eecs.umich.edu:/home/gblack/m5/newmemmemops

--HG--
extra : convert_revision : c49b760eac758dbde30867cb638fcb3b790f4721
2006-11-16 14:41:56 -05:00
Gabe Black
cd5b33b9ff Fixes for SPARC_FS
configs/common/FSConfig.py:
    Make a SPARC system create an IO bus.
src/python/m5/objects/T1000.py:
    Create a T1000 platform
src/arch/sparc/miscregfile.cc:
    Initialize the strand status register to the value legion provides.
src/cpu/exetrace.cc:
    Truncate an ExtMachInst to a MachInst before comparing with Legion.

--HG--
extra : convert_revision : e4189b572a5297e8362f5bd26d87b74736c8e5f1
2006-11-16 12:34:10 -05:00
Gabe Black
ac2c7967f6 Merge zizzer.eecs.umich.edu:/bk/newmem/
into  zeep.eecs.umich.edu:/home/gblack/m5/newmemmemops

--HG--
extra : convert_revision : 966246877ac1f1e6c2675d413b0b405cccfecbeb
2006-11-14 15:23:23 -05:00
Gabe Black
079dd45417 Merge 141.212.106.238:/home/gblack/m5/newmemmemops
into  zizzer.eecs.umich.edu:/.automount/wexford/x/gblack/m5/newmem

--HG--
extra : convert_revision : 8e805b9bbd5c64c2e5951384b3c6ef712062d08c
2006-11-14 15:14:28 -05:00
Gabe Black
bc4d15ddd1 Create a stub t1000 platform.
--HG--
extra : convert_revision : 7e27b23b66c743b4625a1dd9d8d6ba61bff45168
2006-11-14 15:14:27 -05:00
Ron Dreslinski
ac309071af Update phase param in the .py file for the cpus
--HG--
extra : convert_revision : cd2eb8c00adcb34b8693a4d1a66187927c0f6803
2006-11-14 01:13:26 -05:00
Nathan Binkert
afed455e77 Expose debugBreakCycle through swig and get rid of
the Debug param context

--HG--
extra : convert_revision : 40e9dcfa9faedbe0c90a43f908f20a7c14ded6a4
2006-11-13 12:20:08 -08:00
Nathan Binkert
d2d4431752 Create a module called internal where swigged stuff goes.
Rename cc_main to internal.main

--HG--
extra : convert_revision : e938005f600fbf8a43435e29426a948f4501f072
2006-11-12 18:49:16 -08:00
Nathan Binkert
8354cfc715 Fix Typo
--HG--
extra : convert_revision : 4f5b610f364876b29ad0e04f1757e4b42d1f2bd8
2006-11-11 23:57:20 -08:00
Nathan Binkert
b16e559177 Get rid of the ParamContext for pseudo instructions and move
the parameters to the BaseCPU object.

--HG--
extra : convert_revision : 557292cffb40918133647b0c9ac653ee5112df2e
2006-11-11 17:22:10 -08:00
Ali Saidi
cb172d0332 Get SPARC to the point that it starts running. Add ability to load the ROM bin files, cleanup lockstep printing a bit
Since we don't have a platform yet, you need to comment out the default responder stuff in Bus.py to make it work.

SConstruct:
    Add TARGET_ISA to the list of environment variables that end up in the build_env for python
configs/common/FSConfig.py:
    add a simple SPARC system to being testing with, you'll need to change makeLinuxAlphaSystem to makeSparcSystem in fs.py for now
src/SConscript:
    add a raw file object, at least until we get more info about how to compile openboot properly
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
    add parameters for ROM files (OBP/Reset/Hypervisor), a ROM, load files into ROM
src/base/loader/object_file.cc:
src/base/loader/object_file.hh:
    add option to try raw when nothing works
src/cpu/exetrace.cc:
    cleanup lockstep printing a little bit
src/cpu/m5legion_interface.h:
    change the instruction to be 32 bits because it is
src/mem/physical.cc:
    fix assert that doesn't work if memory starts somewhere above 0
src/python/m5/objects/BaseCPU.py:
    Add if statement to choose between sparc tlbs and alpha tlbs
src/python/m5/objects/System.py:
    Add a sparc system that sets the rom addresses correctly
src/python/m5/params.py:
    add the ability to add Addr() together

--HG--
extra : convert_revision : bbbd8a56134f2dda2728091f740e2f7119b0c4af
2006-11-09 18:22:46 -05:00
Lisa Hsu
64c0d82dec simplify maxtick parsing in both the python and the c++.
configs/common/Simulation.py:
    simplify maxtick code a little bit - instead of checking for -1, just set it at MaxTick.
src/python/m5/__init__.py:
    make a new m5 param called MaxTick.
src/sim/host.hh:
    fix the M5 def. of MaxTick
src/sim/main.cc:
    Simplify the MaxTick/num_cycles parsing within main.cc

--HG--
extra : convert_revision : f800addfbc1323591c2e05b892276b439b671668
2006-11-08 15:05:23 -05:00
Kevin Lim
344f72dd62 Remove mem parameter. Should have been removed earlier.
src/python/m5/objects/BaseCPU.py:
    These parameters should have been removed in an earlier push.

--HG--
extra : convert_revision : 781b39ca370361e9568b1af0be96ff5848b1f3f4
2006-11-08 13:04:36 -05:00
Kevin Lim
e174ec1815 Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix

--HG--
extra : convert_revision : 29426cebe81ac077c1a83f50e914ff6955ce81d4
2006-11-08 11:41:10 -05:00
Ali Saidi
f7a35c33d7 add code to operate in lockstep with legion
src/python/m5/main.py:
    add option to operate in lockstep with legion

--HG--
extra : convert_revision : 2cc90ec0cf7e8d028ee813c2034a77415671a628
2006-11-07 15:51:37 -05:00
Kevin Lim
ea5df46882 Fix error message.
--HG--
extra : convert_revision : 7ac0f40595c89b0d9352e82e447d25380b038408
2006-11-07 15:45:03 -05:00
Kevin Lim
244e0c884c Remove hack by setting configuration better.
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
    No need for specialized init() function any more.
src/python/m5/objects/Tsunami.py:
    Override responder when set by user.  This avoids having bus.responder floating around and not doing anything when the user has specified their own default responder.

--HG--
extra : convert_revision : c547daf15b23a889c98e62bfd53c293c85d7a041
2006-11-07 14:24:31 -05:00
Ali Saidi
bf3223d7ce delete pcifake, tsunamifake. Combine BadAddr/IsaFake into one
src/SConscript:
    remove pcifake and tsunami fake from sconscript
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
    combine badaddr and isa fake into one
src/python/m5/objects/Pci.py:
    remove pcifake
src/python/m5/objects/Tsunami.py:
    make badaddr derive from isafake

--HG--
extra : convert_revision : 91470db60aa1de6b85827304e27bd3414cc9d8d1
2006-11-06 16:24:25 -05:00
Kevin Lim
45363ea658 Have bus use the BadAddress device to handle bad addresses. The O3 CPU should be able to boot into Linux with caches on after this change.
src/mem/bus.cc:
src/mem/bus.hh:
    Bus now will be setup with a default responder, unless the user overrides it.  This default responder should return BadAddress if no matching port is found.
src/python/m5/objects/Bus.py:
    Bus now has a default responder for FS mode if the user doesn't override it.  It returns BadAddress if no matching port is found.
src/python/m5/objects/Tsunami.py:
    Add bad address device.  Also record when the user has specified their own default responder.

--HG--
extra : convert_revision : 59070477ae313ee711b2d59baa2369c9a91c5b85
2006-11-02 15:20:37 -05:00
Ali Saidi
0f98905ecc Merge zizzer:/bk/newmem
into  zeep.pool:/z/saidi/work/m5.newmem.head

--HG--
extra : convert_revision : 4db140e6e8408b3ed39da327515b8e88a2701e6b
2006-10-24 12:59:19 -04:00
Lisa Hsu
764f27a0c9 Merge zizzer:/bk/newmem
into  zed.eecs.umich.edu:/z/hsul/work/m5/newmem

--HG--
extra : convert_revision : bb58679e101570d50c040519fb08ffbabfee7416
2006-10-23 18:46:05 -04:00
Lisa Hsu
4da3938ed9 get rid of the "resume" step at the end of changeToTiming/Atomic because this will cause an assertion when you do the CPU switch. instead, push the responsibility of the resume upwards towards the user - documented in se.py and fs.py so it should be ok.
--HG--
extra : convert_revision : 7530cf140844e18cc26df80057f8760f29ec952b
2006-10-23 18:45:30 -04:00
Ron Dreslinski
28e9641c2c Use fixPacket function everywhere.
Fix fixPacket assert function.
Stop timing port from forwarding the request if a response was found in its queue on a read.

src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/python/m5/objects/MemTest.py:
    Add parameter to configure what percentage of mem accesses are functional
src/mem/cache/base_cache.cc:
src/mem/cache/cache_impl.hh:
    Use fix Packet function
src/mem/packet.cc:
    Fix an assert that was checking the wrong thing
src/mem/tport.cc:
    Properly detect if we need to do the access to the functional device

--HG--
extra : convert_revision : 447cc1a9a65ddd2a41e937fb09dc0e7c74e9c75e
2006-10-20 13:01:21 -04:00
Ali Saidi
7be58fd5f4 Merge zizzer:/bk/newmem
into  zeep.pool:/z/saidi/work/m5.newmem.head

--HG--
extra : convert_revision : c0f9bde20585b3811ff906728b003072b69696b5
2006-10-20 13:00:15 -04:00
Ali Saidi
32384b2f6b still working on getting past initialization
--HG--
extra : convert_revision : 7a5fccb9a19d363e479ef24012a7b8598272eaa9
2006-10-20 13:00:05 -04:00
Lisa Hsu
75ecd3be60 how did i not commit this already? the other way doesn't seem to work, need to convert to System ptr first to access System method.
src/python/m5/SimObject.py:
    how did i not commit this already?  the other way doesn't seem to work.

--HG--
extra : convert_revision : 55737d3d10742a1913a376d1febbc5809f2fab8f
2006-10-18 18:04:53 -04:00
Steve Reinhardt
6cd187e1f0 Get rid of obsolete in-cache copy support.
--HG--
extra : convert_revision : a701ed9d078c67718a33f4284c0403a8aaac7b25
2006-10-18 08:16:22 -07:00
Steve Reinhardt
05c487ef3c Enable MP systems via cmd-line flag in fs.py.
configs/example/fs.py:
    Add flag for MP server systems.
src/python/m5/objects/AlphaConsole.py:
src/python/m5/objects/IntrControl.py:
    Change CPU from 'any' to 'cpu[0]' to work better with MP sytems.
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-timing-dual.py:
    Don't need to set console & intrcontrol cpu
    params anymore (default is fixed now).

--HG--
extra : convert_revision : 9417b12b1b395ff7d6a9f2894e4123923c754daf
2006-10-17 21:15:11 -07:00
Lisa Hsu
339b1f8516 Merge zizzer:/bk/newmem
into  zed.eecs.umich.edu:/z/hsul/work/m5/newmem

src/cpu/simple/timing.cc:
    hand merge

--HG--
extra : convert_revision : 083bf102249ad9bc63c447dbf85d3863f935f647
2006-10-12 18:56:57 -04:00
Lisa Hsu
ba795552f5 System not global object, need to preface it with objects.
--HG--
extra : convert_revision : 5e105d7082a8c103fb5d5383c3093734bfd590f5
2006-10-11 18:54:31 -04:00
Lisa Hsu
8acecfef9b since memoryMode was put into the System (from SimObject), things got broken - this fixes it so that changeToTiming/changeToAtomic works.
src/python/m5/SimObject.py:
    now that setMemoryMode is a method in System, need to convert the SimObject * _ccObject into a system ptr to call setMemoryMode.
src/sim/main.cc:
    need this conversion now.
src/sim/sim_object.hh:
    put the enum back into SimObject.
src/sim/system.hh:
    memoryMode is now a part of SimObject, need the ::'s

--HG--
extra : convert_revision : 0ade06957fa57b497798e1f50c237ca1badc821d
2006-10-11 18:53:50 -04:00
Ron Dreslinski
567afbf6ce More cache fixes. Atomic coherence now works as well.
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
    Make Memtester able to test atomic as well
src/mem/bus.cc:
src/mem/bus.hh:
    Handle atomic snoops properly for cache->cache transfers
src/mem/cache/cache_impl.hh:
    Debug output.
    Clean up memleak in atomic mode.
    Set hitLatency.
    Still need to send back reasonable number for atomic return value.
src/mem/packet.cc:
    Add command strings for new commands
src/python/m5/objects/MemTest.py:
    Add param to test atomic memory.

--HG--
extra : convert_revision : 43f880e29215776167c16ea90793ebf8122c785b
2006-10-11 18:28:33 -04:00
Kevin Lim
bdde892d66 Merge ktlim@zizzer:/bk/newmem
into  zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem

src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/cpu/simple/timing.hh:
tests/configs/o3-timing-mp.py:
    Hand merge.

--HG--
extra : convert_revision : a58cc439eb5e8f900d175ed8b5a85b6c8723e558
2006-10-09 22:59:56 -04:00
Gabe Black
a23c6a7193 Merge zizzer.eecs.umich.edu:/bk/newmem
into  zeep.eecs.umich.edu:/home/gblack/m5/newmem_bus

--HG--
extra : convert_revision : 8267487b935eaf11665841ace3a5c664751b53b0
2006-10-09 18:19:35 -04:00
Ron Dreslinski
b9fb4d4870 Make memtest work with 8 memtesters
src/mem/physical.cc:
    Update comment to match memtest use
src/python/m5/objects/PhysicalMemory.py:
    Make memtester have a way to connect functionally
tests/configs/memtest.py:
    Properly create 8 memtesters and connect them to the memory system

--HG--
extra : convert_revision : e5a2dd9c8918d58051b553b5c6a14785d48b34ca
2006-10-09 17:13:50 -04:00
Ron Dreslinski
95ca4f9d4a Merge zizzer:/z/m5/Bitkeeper/newmem
into  zazzer.eecs.umich.edu:/z/rdreslin/m5bk/newmemcleanest

--HG--
extra : convert_revision : 77b06379a520dd91f124c0a543e30ec3a9cd1452
2006-10-09 00:28:26 -04:00
Ron Dreslinski
6c7ab02682 Update the Memtester, commit a config file/test for it.
src/cpu/SConscript:
    Add memtester to the compilation environment.
    Someone who knows this better should make the MemTest a cpu model parameter.

    For now attached with the build of o3 cpu.
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
    Update Memtest for new mem system
src/python/m5/objects/MemTest.py:
    Update memtest python description

--HG--
extra : convert_revision : d6a63e08fda0975a7abfb23814a86a0caf53e482
2006-10-09 00:26:10 -04:00
Steve Reinhardt
31f3f24214 Fixes for Port proxies and proxy parameters.
--HG--
extra : convert_revision : 76b16fe2926611bd1c12c8ad7392355ad30a5138
2006-10-08 18:26:59 -07:00
Gabe Black
2df9053bb0 Merge zizzer.eecs.umich.edu:/bk/newmem
into  zeep.eecs.umich.edu:/home/gblack/m5/newmem_bus

src/mem/bus.cc:
    Hand merged. Needs to be fixed

--HG--
extra : convert_revision : df03219ccfd18431cc726a063bd29d30554944a1
2006-10-08 19:14:09 -04:00