It doesn't compile, and if we really want this we should
start over from scratch and see if we can reuse parts from
BaseSimpleCPU (e.g., derive a FastSimpleCPU).
SConstruct:
src/arch/SConscript:
src/cpu/cpu_models.py:
Get rid of FastCPU model.
--HG--
extra : convert_revision : f3f0362f7292bf21e8e0d4d84c475be8a9789a0c
src/arch/sparc/isa/formats/nop.isa:
Fix nop header so we can compile with multiple CPU models.
(Former code re-defined Nop object for each model.)
--HG--
extra : convert_revision : 04e92622edf4dfefd9e149a17f604e17a93707c9
SConstruct:
Clean up libelf handling. Required better handling of
per-build-root stuff in general (though libelf is the
only thing in that category currently).
src/SConscript:
No libelf-specific stuff in here anymore.
src/base/loader/elf_object.cc:
Just need to include gelf.h... it includes libelf.h.
--HG--
extra : convert_revision : 3d6bdcf8233bda0ac8d08ff777de323df8aa45ae
TimingSimpleCPU. Not there yet.
cpu/simple/atomic.cc:
Only read SC result if store was an SC.
Don't fake SC here; fake it in PhysicalMemory so
all CPU models can share in the joy.
cpu/simple/timing.cc:
Don't forget to checkForInterrupts().
Only fetch subsequent instruction if we're still running
(i.e. not quiesced).
dev/io_device.hh:
Initialize port pointer in SendEvent object.
mem/physical.cc:
Move fake SC "implementation" here from AtomicSimpleCPU.
mem/request.hh:
Initialize flags to all clear, not uninitialized.
Otherwise we can't reliably look at flags w/o explicitly
setting them every time we create a request.
--HG--
extra : convert_revision : ae7601ce6fb54c54e19848aa5391327f9a6e61a6
add sinic back to sconscript file
SConscript:
add sinic back to sconscript file
dev/ide_disk.hh:
add regStats() back to ide_disk
--HG--
extra : convert_revision : a25083993190ceadde977283fbd1fb64e8e7ef86
SConscript:
Comment out sinic for now... needs to be fixed to compile under newmem.
configs/test/SysPaths.py:
Fix paths.
configs/test/fs.py:
SimpleCPU -> AtomicSimpleCPU
Fix vmlinux path
cpu/simple/atomic.cc:
Fix suspendContext() so quiesce works.
Don't forget to checkForInterrupts().
cpu/simple/base.cc:
Minor fix to interrupt check code.
dev/ide_disk.hh:
Don't declare regStats() in header since it's not in
.cc file anymore (will need to add it back in when
stats are added back).
dev/io_device.cc:
Set packet dest to Packet::Broadcast.
dev/pciconfigall.cc:
Set PCI config packet result to Success.
python/m5/objects/Root.py:
Add debug object to Root so things like break_cycles
can be set from command line.
--HG--
extra : convert_revision : aa1c652fe589784e753e13ad9acb0cd5f3b6eafb
TimingSimpleCPU, which use atomic and timing memory accesses
respectively. Common code is factored into the BaseSimpleCPU class.
AtomicSimpleCPU includes an option (simulate_stalls) to add delays
based on the estimated latency reported by the atomic accesses.
Plain old "SimpleCPU" is gone; I have not updated all the config
files (just test/test.py).
Also fixes to get timing accesses working in new memory model and
to get split-phase memory instruction definitions working with
new memory model as well.
arch/alpha/isa/main.isa:
Need to include packet_impl.h for functions that use Packet objects.
arch/alpha/isa/mem.isa:
Change completeAcc() methods to take Packet object pointers.
Also split out StoreCond template for completeAcc(), since
that's the only one that needs write_result and we get an
unused variable warning if we always have it in there.
build/SConstruct:
Update list of recognized CPU model names.
configs/test/test.py:
Change SimpleCPU to AtomicSimpleCPU.
cpu/SConscript:
Define sources for new CPU models.
Add split memory access methods to CPU model signatures.
cpu/cpu_models.py:
cpu/static_inst.hh:
Define new CPU models.
cpu/simple/base.cc:
cpu/simple/base.hh:
Factor out pieces specific to Atomic or Timing models.
mem/bus.cc:
Bus needs to be able to route timing packets based on explicit dest
so responses can get back to requester. Set dest to Packet::Broadcast
to indicate that dest should be derived from address.
Also set packet src field based on port from which packet is sent.
mem/bus.hh:
Set packet src field based on port from which packet is sent.
mem/packet.hh:
Define Broadcast destination address to indicate that
packet should be routed based on address.
mem/physical.cc:
Set packet dest on response so packet is routed
back to requester properly.
mem/port.cc:
Flag blob packets as Broadcast.
python/m5/objects/PhysicalMemory.py:
Change default latency to be 1 cycle.
--HG--
rename : cpu/simple/cpu.cc => cpu/simple/base.cc
rename : cpu/simple/cpu.hh => cpu/simple/base.hh
extra : convert_revision : e9646af6406a20c8c605087936dc4683375c2132
Get rid of more unneeded includes.
base/hostinfo.cc:
base/inet.cc:
base/remote_gdb.cc:
cpu/simple/cpu.cc:
dev/alpha_console.cc:
dev/disk_image.cc:
dev/ns_gige.cc:
dev/sinic.cc:
mem/physical.cc:
sim/param.cc:
sim/process.cc:
sim/pseudo_inst.cc:
test/cprintftest.cc:
Get rid of more unneeded includes.
--HG--
extra : convert_revision : f531ae40db3787f2c55df7d251f251ecae4ab731
into zeep.pool:/z/saidi/work/m5.newmem
base/loader/elf_object.cc:
removed SPARC32PLUS since it doesn't work.
--HG--
extra : convert_revision : 620a1c75cdeefbeeb97383d92335cf319d9c9444
arch/sparc/SConscript:
arch/sparc/process.cc:
base/loader/elf_object.cc:
Add support for sparc/solaris syscall emulation.
--HG--
extra : convert_revision : e22df8476e5c6ae14db1cab1d94d01c0578ea06c
into zeep.pool:/z/saidi/work/m5.nm_m5_pull
SConscript:
dram memory needs to be converted to newmem before we can use it
dev/ide_ctrl.cc:
don't need this printing in newmem
dev/ide_disk.cc:
will read stats in next commit
dev/sinic.cc:
merge sinic from head, still needs work
--HG--
extra : convert_revision : b9aabd8c7814d07d54ce6f971aad3ec349fa24e1
Special Regs (Hi,Lo,FCSR) are now added to the operands for use in decoder.isa.
Now it's back to just debugging execution of code for the release (those unaligned
memory access instruction pairs are still quite the pain i might add)
arch/mips/isa_traits.hh:
declare functions for .cc file
arch/mips/isa_traits.cc:
delete unnecessary overloaded functions
implement condition code functions
implement round function
arch/mips/isa/base.isa:
remove R31 constant... define in the operands.isa file instead
arch/mips/isa/decoder.isa:
wholesale changes once again to FP.
Now the FP Condition Codes are implemented and the FP programs can
run and complete to finish.
Use isnan() instead of my unorderedFP() function
Also, we now access special regs such as HI,LO,FCSR,etc. just like we do any other reg. operand
arch/mips/isa/operands.isa:
add more operands for special control regs in int and FP regfiles
arch/mips/isa/formats/branch.isa:
use R31 instead of r31
arch/mips/isa/formats/fp.isa:
use MakeCCVector to set Condition Codes in FCSR
arch/mips/regfile/float_regfile.hh:
treat control regs like any other reg. Just Index them after the regular architectural registers
arch/mips/regfile/int_regfile.hh:
treat hi,lo as regular int. regs w/special indexing
arch/mips/regfile/regfile.hh:
no longer need for special register accesses with their own function.
--HG--
rename : arch/mips/regfile.hh => arch/mips/regfile/regfile.hh
extra : convert_revision : 5d2f8fdb59606de2b2e9db3e0a085240561e479e
Intended Use:
A SimObject will call the serializer when it needs the state to be serializable (i.e. switchCPUs, checkpoint, switch memory access model). It will call the requestSeialization() function.
The Serializer will signal all the objects in its list to drain their state via the SimObject method drain(). Drain() has a default implementation to just signal done.
When each object is drained it will signal the Serializer that it has drained via the signalDrained() function.
The Serializer will collect these signals, when all have drained it will signal the initial requestor via serializationComplete() method in the SimObject.
Once that object is done, it will signal the Serializer to resumeExecution().
The Serializer will signal all the objects in its list to resume via the resume() method on the SimObject.
SConscript:
Add serializer object to build list
sim/sim_object.cc:
Add default behavior for drain (just signal finished, must be overided if you really must drain something)
sim/sim_object.hh:
Add functions for serializer
--HG--
extra : convert_revision : 15aa2d1b42010c2d703bef9114c11d079c216170
Now all the variations of FP should be implemented correctly in the decoder.
The new formats and functions supporting these functions need to be implemented for
some of the FP stuff but for the most part things are looking like their "supposed to"...
arch/mips/isa/decoder.isa:
Fixes for Paired-Single FP Compare Operations...
Now all the variations of FP should be implemented correctly in the decoder.
arch/mips/isa/formats/fp.isa:
Add new PS formats
arch/mips/isa_traits.cc:
Add skeleton overloaded round & truncate functions
arch/mips/isa_traits.hh:
declare overloaded functions
--HG--
extra : convert_revision : 15d5cf7b08ac2dc9ebcd6b268e92d4abffdd8597
Auxiliary Functions and Formats for FP in general
arch/mips/isa/decoder.isa:
ISA Parser doesnt accept operands of different types in one instruction so fix this for unorderedFP functions...
Add basic support for Paired Singled (PS) FP ops which happen to be part of the MIPS 32-ASE but turned out to
be included in the MIPS32ISA manual... The PS instructions allow SIMD in a pipeline...
arch/mips/isa/formats/fp.isa:
Add some more Formats for FP operation. I will add some auxiliary code through these formats
to alleviate code redundancy in the decoder.isa
arch/mips/isa/operands.isa:
Add operands for Paired Singles Ops
arch/mips/isa_traits.cc:
removed convert&round function and replace with fpConvert.
The whole "rounding mode" stuff is something that should be considered for full-system mode...
Also added skeletons for the unorderedFP,truncFP,and condition code funcs.
arch/mips/isa_traits.hh:
declare some Functions
arch/mips/types.hh:
add new conversion types
--HG--
extra : convert_revision : 79251d590a27b74a3d6a62a2fbb937df3e59963f
into zazzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem
--HG--
extra : convert_revision : 0a146eed200abd2c18f135b112987c5cf91a649b
There still needs to be a work around to handle the paired singles operations ...
arch/mips/isa/decoder.isa:
More revamping of the floating point ops in decoder.isa. Change all of the
"convert and round" functions to fpConvert. Also, the utility functions
roundFP, truncFP, and unorderedFP are in place everywhere. Things
have been set up to appropriately use the FP condition codes in the decoder.isa
The fp.isa format file and the isa_traits.cc file now needed to be updated
to implement the appropriate "backend" operations/functionality...
arch/mips/isa_traits.hh:
Remove convert & round functions
Add roundFP, truncFP,unorderedFP, and the get/setFPconditionCode
functions
arch/mips/isa_traits.cc:
Add utility functions
--HG--
extra : convert_revision : 3d6708388abae5b432467f528d52e6343afecd9c
Now handles instructions for FP compares in single or double recision
arch/mips/isa/decoder.isa:
Now handles instructions for FP compares in single or double recision
--HG--
extra : convert_revision : eb3a13616e6736bf2d1ead0b816dda8c6099b20f
Basic Code for Floating Point Compare with Single Precision Floats
Added.
arch/mips/isa/decoder.isa:
Basic Code for Floating Point Compare with Single Precision Floats
Added.
--HG--
extra : convert_revision : 56b14da1e9d987c2d2090fd2f79af8b12fe8d2ec
Added support for FP compare instructions. Somehow these flew beneath
my radar. Also, I start to use special FP utility functions in FP code.
Right now, they are defined in isa_traits.hh but may be moved in the
future
arch/mips/isa/decoder.isa:
Added support for FP compare instructions. Somehow these flew beneath
my radar. Also, I start to use special FP utility functions in FP code.
Right now, they are defined in isa_traits.hh but may be moved in the
future
--HG--
extra : convert_revision : 84a3b66882f3977ce9c1356cf466d62a7fd8bf19
Debug FP instructions to handle these FP insts
arch/mips/isa/bitfields.isa:
add Bitfield for Floating Point Condition Codes
arch/mips/isa/decoder.isa:
Follow instruction naming style with FP single insts
Send the float value to the convert&round functions in single FP
add ll inst support
add 'token' sc support
arch/mips/isa_traits.cc:
Add SINGLE->WORD, WORD->SINGLE, & WORD->DOUBLE conversions
arch/mips/regfile.hh:
update header files
arch/mips/regfile/float_regfile.hh:
Add more FP registers
--HG--
rename : arch/mips/int_regfile.hh => arch/mips/regfile/int_regfile.hh
rename : arch/mips/misc_regfile.hh => arch/mips/regfile/misc_regfile.hh
extra : convert_revision : 92faf0bfd8542ade762ac569ec158d198f6a9c7e
Now we are to the point where more benchmarks and instruction-coverage
is necessary to totally verify/validate correct operation across
all MIPS instructions
arch/mips/isa_traits.hh:
fix for reading double values ... must rearrange bits before using void* to read double.
configs/test/hello_mips:
real hello world MIPS binary
--HG--
extra : convert_revision : 153de1f8a830882c6972bd0bdb56da818f614def
register with the higher # contains the most significant bytes...
arch/mips/isa/decoder.isa:
divide instruction fixes
arch/mips/isa_traits.cc:
use double as argument to cvt & round function.
clean up cout statements in function.
arch/mips/isa_traits.hh:
In MIPS the higher # reg of a doubles pair is ALSO the most significant reg.
Once I switched this the basic MIPS FP test I had worked.
--HG--
extra : convert_revision : 45c80df229e6174d0b52fc7cfb530642b1f1fc35
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem
--HG--
extra : convert_revision : c48a8857f5a520ff8061eb3d8f08dcd43661e68c
