Ali Saidi
1cfe2c8820
Stats: Fix stats for cumulative flags change.
2010-12-07 16:19:57 -08:00
Ali Saidi
e681c0f7b3
O3: Support squashing all state after special instruction
...
For SPARC ASIs are added to the ExtMachInst. If the ASI is changed simply
marking the instruction as Serializing isn't enough beacuse that only
stops rename. This provides a mechanism to squash all the instructions
and refetch them
2010-12-07 16:19:57 -08:00
Giacomo Gabrielli
719f9a6d4f
O3: Make all instructions that write a misc. register not perform the write until commit.
...
ARM instructions updating cumulative flags (ARM FP exceptions and saturation
flags) are not serialized.
Added aliases for ARM FP exceptions and saturation flags in FPSCR. Removed
write accesses to the FP condition codes for most ARM VFP instructions: only
VCMP and VCMPE instructions update the FP condition codes. Removed a potential
cause of seg. faults in the O3 model for NEON memory macro-ops (ARM).
2010-12-07 16:19:57 -08:00
Min Kyu Jeong
4bbdd6ceb2
O3: Support SWAP and predicated loads/store in ARM.
2010-12-07 16:19:57 -08:00
Ali Saidi
21bfbd422c
ARM: Support switchover with hardware table walkers
2010-12-07 16:19:57 -08:00
Nilay Vaish
658849d101
ruby: Converted old ruby debug calls to M5 debug calls
...
This patch developed by Nilay Vaish converts all the old GEMS-style ruby
debug calls to the appropriate M5 debug calls.
2010-12-01 11:30:04 -08:00
Ali Saidi
0f039fe447
IGbE: return 0 on an invalid descriptor size instead of -1.
...
Asserts where descSize() get called with assert if we end up returning
0.
2010-11-26 20:47:23 -05:00
Gabe Black
7f6ca0981f
Copyright: Add AMD copyright to the param changes I just made.
2010-11-23 17:08:41 -05:00
Gabe Black
b3de4855c3
Params: Add parameter types for IP addresses in various forms.
...
New parameter forms are:
IP address in the format "a.b.c.d" where a-d are from decimal 0 to 255.
IP address with netmask which is an IP followed by "/n" where n is a netmask
length in bits from decimal 0 to 32 or by "/e.f.g.h" where e-h are from
decimal 0 to 255 and which is all 1 bits followed by all 0 bits when
represented in binary. These can also be specified as an integral IP and
netmask passed in separately.
IP address with port which is an IP followed by ":p" where p is a port index
from decimal 0 to 65535. These can also be specified as an integral IP and
port value passed in separately.
2010-11-23 15:54:43 -05:00
Gabe Black
40d434d551
X86: Loosen an assert for x86 and connect the APIC ports when caches are used.
2010-11-23 06:11:50 -05:00
Gabe Black
3cd349f443
X86: Obey the PCD (cache disable) bit in the page tables.
2010-11-23 06:10:17 -05:00
Gabe Black
c8c921b9db
X86: Mark IO space accesses as uncachable.
2010-11-22 05:49:03 -05:00
Gabe Black
cb3674cd27
X86: Remove reserved* from the m5 utility program for x86.
2010-11-22 05:47:54 -05:00
Gabe Black
6a00519e73
IDE,X86: Fix IDE controller BAR configuration for x86.
2010-11-22 02:33:47 -05:00
Nathan Binkert
4d9ff1954b
random: small comment about our random number generator and its origin
2010-11-20 12:12:27 -08:00
Ali Saidi
34a8e37c13
SE: Fix simulating more than 4GB of RAM in SE mode
...
This change removes some dead code in PhysicalMemory, uses a 64 bit type
for the page pointer in System (instead of 32 bit) and cleans up some style.
2010-11-19 18:01:01 -06:00
Ali Saidi
5c6f4a0f17
SCons: Fix compilation on OS X
2010-11-19 18:00:59 -06:00
Ali Saidi
e1b9a815dd
SCons: Support building without an ISA
2010-11-19 18:00:39 -06:00
Gabe Black
92655b6399
O3: Fix fp destination register flattening, and index offset adjusting.
...
This change makes O3 flatten floating point destination registers, and also
fixes misc register flattening so that it's correctly repositioned relative to
the resized regions for integer and floating point indices.
It also fixes some overly long lines.
2010-11-18 13:11:36 -05:00
Gabe Black
4876e0c92b
Config: Change misleading "cycle" message to say "tick".
...
Most of the messages in the config scripts that report a time value already
print "@ tick" followed by the current tick value, but a few were printing
"@ cycle". Since this is a distinction that's frequently confusing to new
users, this changes those message to the more accurate and consistent "@ tick".
2010-11-17 23:16:19 -05:00
Gabe Black
0e41d4e5ea
Stats: Update the O3 fetch stats for SPARC.
2010-11-15 19:37:15 -08:00
Gabe Black
8b9b85e92c
O3: Make O3 support variably lengthed instructions.
2010-11-15 19:37:03 -08:00
Ali Saidi
776c075917
O3: reset architetural state by calling clear()
2010-11-15 14:04:05 -06:00
Ali Saidi
5f59e195d6
ARM: Add comment about the organization of the IT state register
2010-11-15 14:04:05 -06:00
Ali Saidi
371110fb0a
Regressions: Update regressions for SIMD opclass changes
2010-11-15 14:04:05 -06:00
Giacomo Gabrielli
0058927190
CPU/ARM: Add SIMD op classes to CPU models and ARM ISA.
2010-11-15 14:04:04 -06:00
Ali Saidi
2a3cefe151
ARM: Compile O3 CPU by default
2010-11-15 14:04:04 -06:00
Min Kyu Jeong
745df74fe0
O3: prevent a squash when completeAcc() modifies misc reg through TC.
...
This happens on ARM instructions when they update the IT state bits.
Code and associated comment was copied from execute() and initiateAcc() methods
2010-11-15 14:04:04 -06:00
Ali Saidi
4a1814bd52
ARM: Return an FailUnimp instruction when an unimplemented CP15 register is accessed.
...
Just panicing in readMiscReg() doesn't work because a speculative access
in the o3 model can end the simulation.
2010-11-15 14:04:04 -06:00
Ali Saidi
d4767f440a
SCons: Cleanup SCons output during compile
2010-11-15 14:04:04 -06:00
Ali Saidi
c370866331
ARM: Update regressions for CLCD and KMI additions
2010-11-15 14:04:03 -06:00
William Wang
6fbea15064
ARM: Add a Keyboard Mouse Interface controller
2010-11-15 14:04:03 -06:00
William Wang
fc1eeafc94
ARM: Implement a CLCD Frame buffer
2010-11-15 14:04:03 -06:00
William Wang
80db6a5ecb
ARM: Add support for GDB on ARM
...
--HG--
rename : src/arch/alpha/remote_gdb.cc => src/arch/arm/remote_gdb.cc
2010-11-15 14:04:03 -06:00
Ali Saidi
06864386a1
ARM: Make utility.hh meet style guidelines
2010-11-15 14:04:03 -06:00
Ali Saidi
d7b8efa0df
ARM: Add support for a dumb IDE controller
2010-11-15 14:04:03 -06:00
Ali Saidi
13931b9b82
ARM: Cache the misc regs at the TLB to limit readMiscReg() calls.
2010-11-15 14:04:03 -06:00
Ali Saidi
4c2e5c282b
ARM: Add support for switching CPUs
2010-11-15 14:04:03 -06:00
Ali Saidi
08c5673d56
ARM: Use the correct delete operator for RFE
2010-11-15 14:04:03 -06:00
Ali Saidi
50431f4eab
ARM: Fix SRS instruction to micro-code memory operation and register update.
...
Previously the SRS instruction attempted to writeback in initiateAcc() which
worked until a recent change, but was incorrect.
2010-11-15 14:04:03 -06:00
Ali Saidi
16f210da37
CPU: Fix bug when a split transaction is issued to a faster cache
...
In the case of a split transaction and a cache that is faster than a CPU we
could get two responses before next_tick expires. Add an event that is
scheduled in this case and return false rather than asserting.
2010-11-15 14:04:03 -06:00
Ali Saidi
265e145db2
ARM: Do something predictable for an UNPREDICTABLE branch.
2010-11-15 14:04:03 -06:00
Gabe Black
46472279c0
Params: Fix an off by one error and a misleading comment.
2010-11-11 11:58:09 -08:00
Gabe Black
3c237f44c9
SimObject: Add a comment near clear_child that it's unlikely to be called.
2010-11-11 11:41:13 -08:00
Gabe Black
cdc585e0e8
SPARC: Clean up some historical style issues.
2010-11-11 02:03:58 -08:00
Ali Saidi
0b7967d606
Update EIO regressions for last set of patches
2010-11-10 00:48:03 -06:00
Gabe Black
14b27fc302
scons: Work around for old versions of scons mistaking strings for sequences.
2010-11-09 11:03:40 -08:00
Gabe Black
2fd9dc19cd
SimObject: Use "self" when calling the clear_child method.
2010-11-09 10:45:02 -08:00
Gabe Black
388124492e
X86: Fix X86_FS compilation.
2010-11-08 12:43:38 -08:00
Ali Saidi
06c5283930
ARM: Update SE stats for TLB stats additions
2010-11-08 13:59:35 -06:00
