gem5/configs/example/fs.py

253 lines
9.4 KiB
Python
Raw Normal View History

sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
# Copyright (c) 2010-2013 ARM Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# to a hardware implementation of the functionality of the software
# licensed hereunder. You may use the software subject to the license
# terms below provided that you ensure that this notice is replicated
# unmodified and in its entirety in all distributions of the software,
# modified or unmodified, in source code or in binary form.
#
# Copyright (c) 2006-2007 The Regents of The University of Michigan
Finish test clean-up & reorg. configs/common/FSConfig.py: Add default Machine() param configs/example/fs.py: configs/example/se.py: make it work again src/python/m5/objects/BaseCPU.py: Make mem PhysicalMemory so that a Parent.any proxy works well src/sim/process.cc: Increase default stack size so we don't get an 'increasing stack' message on 'hello world' tests/SConscript: Add full list of current configs. tests/configs/simple-atomic.py: tests/configs/simple-timing.py: don't need SEConfig anymore tests/quick/00.hello/test.py: tests/quick/20.eio-short/test.py: fix tests/run.py: move configs to separate dir --HG-- rename : configs/test/fs.py => configs/example/fs.py rename : configs/test/test.py => configs/example/se.py rename : tests/simple-atomic.py => tests/configs/simple-atomic.py rename : tests/simple-timing.py => tests/configs/simple-timing.py rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16 20:42:44 +02:00
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Ali Saidi
import optparse
import sys
Finish test clean-up & reorg. configs/common/FSConfig.py: Add default Machine() param configs/example/fs.py: configs/example/se.py: make it work again src/python/m5/objects/BaseCPU.py: Make mem PhysicalMemory so that a Parent.any proxy works well src/sim/process.cc: Increase default stack size so we don't get an 'increasing stack' message on 'hello world' tests/SConscript: Add full list of current configs. tests/configs/simple-atomic.py: tests/configs/simple-timing.py: don't need SEConfig anymore tests/quick/00.hello/test.py: tests/quick/20.eio-short/test.py: fix tests/run.py: move configs to separate dir --HG-- rename : configs/test/fs.py => configs/example/fs.py rename : configs/test/test.py => configs/example/se.py rename : tests/simple-atomic.py => tests/configs/simple-atomic.py rename : tests/simple-timing.py => tests/configs/simple-timing.py rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16 20:42:44 +02:00
import m5
from m5.defines import buildEnv
from m5.objects import *
from m5.util import addToPath, fatal
addToPath('../common')
Finish test clean-up & reorg. configs/common/FSConfig.py: Add default Machine() param configs/example/fs.py: configs/example/se.py: make it work again src/python/m5/objects/BaseCPU.py: Make mem PhysicalMemory so that a Parent.any proxy works well src/sim/process.cc: Increase default stack size so we don't get an 'increasing stack' message on 'hello world' tests/SConscript: Add full list of current configs. tests/configs/simple-atomic.py: tests/configs/simple-timing.py: don't need SEConfig anymore tests/quick/00.hello/test.py: tests/quick/20.eio-short/test.py: fix tests/run.py: move configs to separate dir --HG-- rename : configs/test/fs.py => configs/example/fs.py rename : configs/test/test.py => configs/example/se.py rename : tests/simple-atomic.py => tests/configs/simple-atomic.py rename : tests/simple-timing.py => tests/configs/simple-timing.py rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16 20:42:44 +02:00
from FSConfig import *
from SysPaths import *
from Benchmarks import *
import Simulation
import CacheConfig
import MemConfig
from Caches import *
import Options
Finish test clean-up & reorg. configs/common/FSConfig.py: Add default Machine() param configs/example/fs.py: configs/example/se.py: make it work again src/python/m5/objects/BaseCPU.py: Make mem PhysicalMemory so that a Parent.any proxy works well src/sim/process.cc: Increase default stack size so we don't get an 'increasing stack' message on 'hello world' tests/SConscript: Add full list of current configs. tests/configs/simple-atomic.py: tests/configs/simple-timing.py: don't need SEConfig anymore tests/quick/00.hello/test.py: tests/quick/20.eio-short/test.py: fix tests/run.py: move configs to separate dir --HG-- rename : configs/test/fs.py => configs/example/fs.py rename : configs/test/test.py => configs/example/se.py rename : tests/simple-atomic.py => tests/configs/simple-atomic.py rename : tests/simple-timing.py => tests/configs/simple-timing.py rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16 20:42:44 +02:00
parser = optparse.OptionParser()
Options.addCommonOptions(parser)
Options.addFSOptions(parser)
Finish test clean-up & reorg. configs/common/FSConfig.py: Add default Machine() param configs/example/fs.py: configs/example/se.py: make it work again src/python/m5/objects/BaseCPU.py: Make mem PhysicalMemory so that a Parent.any proxy works well src/sim/process.cc: Increase default stack size so we don't get an 'increasing stack' message on 'hello world' tests/SConscript: Add full list of current configs. tests/configs/simple-atomic.py: tests/configs/simple-timing.py: don't need SEConfig anymore tests/quick/00.hello/test.py: tests/quick/20.eio-short/test.py: fix tests/run.py: move configs to separate dir --HG-- rename : configs/test/fs.py => configs/example/fs.py rename : configs/test/test.py => configs/example/se.py rename : tests/simple-atomic.py => tests/configs/simple-atomic.py rename : tests/simple-timing.py => tests/configs/simple-timing.py rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16 20:42:44 +02:00
(options, args) = parser.parse_args()
if args:
print "Error: script doesn't take any positional arguments"
sys.exit(1)
# driver system CPU is always simple... note this is an assignment of
# a class, not an instance.
DriveCPUClass = AtomicSimpleCPU
drive_mem_mode = 'atomic'
# Check if KVM support has been enabled, we might need to do VM
# configuration if that's the case.
have_kvm_support = 'BaseKvmCPU' in globals()
def is_kvm_cpu(cpu_class):
return have_kvm_support and cpu_class != None and \
issubclass(cpu_class, BaseKvmCPU)
# system under test can be any CPU
(TestCPUClass, test_mem_mode, FutureClass) = Simulation.setCPUClass(options)
Finish test clean-up & reorg. configs/common/FSConfig.py: Add default Machine() param configs/example/fs.py: configs/example/se.py: make it work again src/python/m5/objects/BaseCPU.py: Make mem PhysicalMemory so that a Parent.any proxy works well src/sim/process.cc: Increase default stack size so we don't get an 'increasing stack' message on 'hello world' tests/SConscript: Add full list of current configs. tests/configs/simple-atomic.py: tests/configs/simple-timing.py: don't need SEConfig anymore tests/quick/00.hello/test.py: tests/quick/20.eio-short/test.py: fix tests/run.py: move configs to separate dir --HG-- rename : configs/test/fs.py => configs/example/fs.py rename : configs/test/test.py => configs/example/se.py rename : tests/simple-atomic.py => tests/configs/simple-atomic.py rename : tests/simple-timing.py => tests/configs/simple-timing.py rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16 20:42:44 +02:00
# Match the memories with the CPUs, the driver system always simple,
# and based on the options for the test system
DriveMemClass = SimpleMemory
TestMemClass = Simulation.setMemClass(options)
Finish test clean-up & reorg. configs/common/FSConfig.py: Add default Machine() param configs/example/fs.py: configs/example/se.py: make it work again src/python/m5/objects/BaseCPU.py: Make mem PhysicalMemory so that a Parent.any proxy works well src/sim/process.cc: Increase default stack size so we don't get an 'increasing stack' message on 'hello world' tests/SConscript: Add full list of current configs. tests/configs/simple-atomic.py: tests/configs/simple-timing.py: don't need SEConfig anymore tests/quick/00.hello/test.py: tests/quick/20.eio-short/test.py: fix tests/run.py: move configs to separate dir --HG-- rename : configs/test/fs.py => configs/example/fs.py rename : configs/test/test.py => configs/example/se.py rename : tests/simple-atomic.py => tests/configs/simple-atomic.py rename : tests/simple-timing.py => tests/configs/simple-timing.py rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16 20:42:44 +02:00
if options.benchmark:
try:
bm = Benchmarks[options.benchmark]
except KeyError:
Finish test clean-up & reorg. configs/common/FSConfig.py: Add default Machine() param configs/example/fs.py: configs/example/se.py: make it work again src/python/m5/objects/BaseCPU.py: Make mem PhysicalMemory so that a Parent.any proxy works well src/sim/process.cc: Increase default stack size so we don't get an 'increasing stack' message on 'hello world' tests/SConscript: Add full list of current configs. tests/configs/simple-atomic.py: tests/configs/simple-timing.py: don't need SEConfig anymore tests/quick/00.hello/test.py: tests/quick/20.eio-short/test.py: fix tests/run.py: move configs to separate dir --HG-- rename : configs/test/fs.py => configs/example/fs.py rename : configs/test/test.py => configs/example/se.py rename : tests/simple-atomic.py => tests/configs/simple-atomic.py rename : tests/simple-timing.py => tests/configs/simple-timing.py rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16 20:42:44 +02:00
print "Error benchmark %s has not been defined." % options.benchmark
print "Valid benchmarks are: %s" % DefinedBenchmarks
sys.exit(1)
else:
if options.dual:
bm = [SysConfig(disk=options.disk_image, mem=options.mem_size),
SysConfig(disk=options.disk_image, mem=options.mem_size)]
Finish test clean-up & reorg. configs/common/FSConfig.py: Add default Machine() param configs/example/fs.py: configs/example/se.py: make it work again src/python/m5/objects/BaseCPU.py: Make mem PhysicalMemory so that a Parent.any proxy works well src/sim/process.cc: Increase default stack size so we don't get an 'increasing stack' message on 'hello world' tests/SConscript: Add full list of current configs. tests/configs/simple-atomic.py: tests/configs/simple-timing.py: don't need SEConfig anymore tests/quick/00.hello/test.py: tests/quick/20.eio-short/test.py: fix tests/run.py: move configs to separate dir --HG-- rename : configs/test/fs.py => configs/example/fs.py rename : configs/test/test.py => configs/example/se.py rename : tests/simple-atomic.py => tests/configs/simple-atomic.py rename : tests/simple-timing.py => tests/configs/simple-timing.py rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16 20:42:44 +02:00
else:
bm = [SysConfig(disk=options.disk_image, mem=options.mem_size)]
np = options.num_cpus
if buildEnv['TARGET_ISA'] == "alpha":
test_sys = makeLinuxAlphaSystem(test_mem_mode, bm[0])
elif buildEnv['TARGET_ISA'] == "mips":
test_sys = makeLinuxMipsSystem(test_mem_mode, bm[0])
elif buildEnv['TARGET_ISA'] == "sparc":
test_sys = makeSparcSystem(test_mem_mode, bm[0])
elif buildEnv['TARGET_ISA'] == "x86":
test_sys = makeLinuxX86System(test_mem_mode, options.num_cpus, bm[0])
elif buildEnv['TARGET_ISA'] == "arm":
test_sys = makeArmSystem(test_mem_mode, options.machine_type, bm[0],
options.dtb_filename,
bare_metal=options.bare_metal)
if options.enable_context_switch_stats_dump:
test_sys.enable_context_switch_stats_dump = True
else:
fatal("Incapable of building %s full system!", buildEnv['TARGET_ISA'])
# Create a top-level voltage domain
test_sys.voltage_domain = VoltageDomain(voltage = options.sys_voltage)
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
# Create a source clock for the system and set the clock period
test_sys.clk_domain = SrcClockDomain(clock = options.sys_clock,
voltage_domain = test_sys.voltage_domain)
# Create a CPU voltage domain
test_sys.cpu_voltage_domain = VoltageDomain()
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
# Create a source clock for the CPUs and set the clock period
test_sys.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock,
voltage_domain =
test_sys.cpu_voltage_domain)
if options.kernel is not None:
test_sys.kernel = binary(options.kernel)
if options.script is not None:
test_sys.readfile = options.script
if options.lpae:
test_sys.have_lpae = True
if options.virtualisation:
test_sys.have_virtualization = True
2012-01-10 01:08:20 +01:00
test_sys.init_param = options.init_param
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
# For now, assign all the CPUs to the same clock domain
test_sys.cpu = [TestCPUClass(clk_domain=test_sys.cpu_clk_domain, cpu_id=i)
for i in xrange(np)]
if is_kvm_cpu(TestCPUClass) or is_kvm_cpu(FutureClass):
test_sys.vm = KvmVM()
if options.caches or options.l2cache:
# By default the IOCache runs at the system clock
test_sys.iocache = IOCache(addr_ranges = test_sys.mem_ranges)
test_sys.iocache.cpu_side = test_sys.iobus.master
test_sys.iocache.mem_side = test_sys.membus.slave
else:
test_sys.iobridge = Bridge(delay='50ns', ranges = test_sys.mem_ranges)
test_sys.iobridge.slave = test_sys.iobus.master
test_sys.iobridge.master = test_sys.membus.slave
# Sanity check
if options.fastmem:
if TestCPUClass != AtomicSimpleCPU:
fatal("Fastmem can only be used with atomic CPU!")
if (options.caches or options.l2cache):
fatal("You cannot use fastmem in combination with caches!")
for i in xrange(np):
if options.fastmem:
test_sys.cpu[i].fastmem = True
if options.checker:
test_sys.cpu[i].addCheckerCpu()
test_sys.cpu[i].createThreads()
CacheConfig.config_cache(options, test_sys)
MemConfig.config_mem(options, test_sys)
Finish test clean-up & reorg. configs/common/FSConfig.py: Add default Machine() param configs/example/fs.py: configs/example/se.py: make it work again src/python/m5/objects/BaseCPU.py: Make mem PhysicalMemory so that a Parent.any proxy works well src/sim/process.cc: Increase default stack size so we don't get an 'increasing stack' message on 'hello world' tests/SConscript: Add full list of current configs. tests/configs/simple-atomic.py: tests/configs/simple-timing.py: don't need SEConfig anymore tests/quick/00.hello/test.py: tests/quick/20.eio-short/test.py: fix tests/run.py: move configs to separate dir --HG-- rename : configs/test/fs.py => configs/example/fs.py rename : configs/test/test.py => configs/example/se.py rename : tests/simple-atomic.py => tests/configs/simple-atomic.py rename : tests/simple-timing.py => tests/configs/simple-timing.py rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16 20:42:44 +02:00
if len(bm) == 2:
if buildEnv['TARGET_ISA'] == 'alpha':
drive_sys = makeLinuxAlphaSystem(drive_mem_mode, bm[1])
elif buildEnv['TARGET_ISA'] == 'mips':
drive_sys = makeLinuxMipsSystem(drive_mem_mode, bm[1])
elif buildEnv['TARGET_ISA'] == 'sparc':
drive_sys = makeSparcSystem(drive_mem_mode, bm[1])
elif buildEnv['TARGET_ISA'] == 'x86':
drive_sys = makeLinuxX86System(drive_mem_mode, np, bm[1])
elif buildEnv['TARGET_ISA'] == 'arm':
drive_sys = makeArmSystem(drive_mem_mode, options.machine_type, bm[1])
# Create a top-level voltage domain
drive_sys.voltage_domain = VoltageDomain(voltage = options.sys_voltage)
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
# Create a source clock for the system and set the clock period
drive_sys.clk_domain = SrcClockDomain(clock = options.sys_clock)
# Create a CPU voltage domain
drive_sys.cpu_voltage_domain = VoltageDomain()
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
# Create a source clock for the CPUs and set the clock period
drive_sys.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock,
voltage_domain =
drive_sys.cpu_voltage_domain)
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
drive_sys.cpu = DriveCPUClass(clk_domain=drive_sys.cpu_clk_domain,
cpu_id=0)
drive_sys.cpu.createThreads()
drive_sys.cpu.createInterruptController()
drive_sys.cpu.connectAllPorts(drive_sys.membus)
if options.fastmem:
drive_sys.cpu.fastmem = True
if options.kernel is not None:
drive_sys.kernel = binary(options.kernel)
if is_kvm_cpu(DriveCPUClass):
drive_sys.vm = KvmVM()
Bridge: Remove NACKs in the bridge and unify with packet queue This patch removes the NACKing in the bridge, as the split request/response busses now ensure that protocol deadlocks do not occur, i.e. the message-dependency chain is broken by always allowing responses to make progress without being stalled by requests. The NACKs had limited support in the system with most components ignoring their use (with a suitable call to panic), and as the NACKs are no longer needed to avoid protocol deadlocks, the cleanest way is to simply remove them. The bridge is the starting point as this is the only place where the NACKs are created. A follow-up patch will remove the code that deals with NACKs in the endpoints, e.g. the X86 table walker and DMA port. Ultimately the type of packet can be complete removed (until someone sees a need for modelling more complex protocols, which can now be done in parts of the system since the port and interface is split). As a consequence of the NACK removal, the bridge now has to send a retry to a master if the request or response queue was full on the first attempt. This change also makes the bridge ports very similar to QueuedPorts, and a later patch will change the bridge to use these. A first step in this direction is taken by aligning the name of the member functions, as done by this patch. A bit of tidying up has also been done as part of the simplifications. Surprisingly, this patch has no impact on any of the regressions. Hence, there was never any NACKs issued. In a follow-up patch I would suggest changing the size of the bridge buffers set in FSConfig.py to also test the situation where the bridge fills up.
2012-08-22 17:39:58 +02:00
drive_sys.iobridge = Bridge(delay='50ns',
ranges = drive_sys.mem_ranges)
drive_sys.iobridge.slave = drive_sys.iobus.master
drive_sys.iobridge.master = drive_sys.membus.slave
# Create the appropriate memory controllers and connect them to the
# memory bus
drive_sys.mem_ctrls = [DriveMemClass(range = r)
for r in drive_sys.mem_ranges]
for i in xrange(len(drive_sys.mem_ctrls)):
drive_sys.mem_ctrls[i].port = drive_sys.membus.master
2012-01-10 01:08:20 +01:00
drive_sys.init_param = options.init_param
root = makeDualRoot(True, test_sys, drive_sys, options.etherdump)
Finish test clean-up & reorg. configs/common/FSConfig.py: Add default Machine() param configs/example/fs.py: configs/example/se.py: make it work again src/python/m5/objects/BaseCPU.py: Make mem PhysicalMemory so that a Parent.any proxy works well src/sim/process.cc: Increase default stack size so we don't get an 'increasing stack' message on 'hello world' tests/SConscript: Add full list of current configs. tests/configs/simple-atomic.py: tests/configs/simple-timing.py: don't need SEConfig anymore tests/quick/00.hello/test.py: tests/quick/20.eio-short/test.py: fix tests/run.py: move configs to separate dir --HG-- rename : configs/test/fs.py => configs/example/fs.py rename : configs/test/test.py => configs/example/se.py rename : tests/simple-atomic.py => tests/configs/simple-atomic.py rename : tests/simple-timing.py => tests/configs/simple-timing.py rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16 20:42:44 +02:00
elif len(bm) == 1:
root = Root(full_system=True, system=test_sys)
Finish test clean-up & reorg. configs/common/FSConfig.py: Add default Machine() param configs/example/fs.py: configs/example/se.py: make it work again src/python/m5/objects/BaseCPU.py: Make mem PhysicalMemory so that a Parent.any proxy works well src/sim/process.cc: Increase default stack size so we don't get an 'increasing stack' message on 'hello world' tests/SConscript: Add full list of current configs. tests/configs/simple-atomic.py: tests/configs/simple-timing.py: don't need SEConfig anymore tests/quick/00.hello/test.py: tests/quick/20.eio-short/test.py: fix tests/run.py: move configs to separate dir --HG-- rename : configs/test/fs.py => configs/example/fs.py rename : configs/test/test.py => configs/example/se.py rename : tests/simple-atomic.py => tests/configs/simple-atomic.py rename : tests/simple-timing.py => tests/configs/simple-timing.py rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16 20:42:44 +02:00
else:
print "Error I don't know how to create more than 2 systems."
sys.exit(1)
Time: Add a mechanism to prevent M5 from running faster than real time. M5 skips over any simulated time where it doesn't have any work to do. When the simulation is active, the time skipped is short and the work done at any point in time is relatively substantial. If the time between events is long and/or the work to do at each event is small, it's possible for simulated time to pass faster than real time. When running a benchmark that can be good because it means the simulation will finish sooner in real time. When interacting with the real world through, for instance, a serial terminal or bridge to a real network, this can be a problem. Human or network response time could be greatly exagerated from the perspective of the simulation and make simulated events happen "too soon" from an external perspective. This change adds the capability to force the simulation to run no faster than real time. It does so by scheduling a periodic event that checks to see if its simulated period is shorter than its real period. If it is, it stalls the simulation until they're equal. This is called time syncing. A future change could add pseudo instructions which turn time syncing on and off from within the simulation. That would allow time syncing to be used for the interactive parts of a session but then turned off when running a benchmark using the m5 utility program inside a script. Time syncing would probably not happen anyway while running a benchmark because there would be plenty of work for M5 to do, but the event overhead could be avoided.
2011-01-19 20:48:00 +01:00
if options.timesync:
root.time_sync_enable = True
if options.frame_capture:
VncServer.frame_capture = True
Simulation.setWorkCountOptions(test_sys, options)
Simulation.run(options, root, test_sys, FutureClass)