Commit graph

10164 commits

Author SHA1 Message Date
Marco Elver
d9fa950396 ruby: recorder: Fix (de-)serializing with different cache block-sizes
Upon aggregating records, serialize system's cache-block size, as the
cache-block size can be different when restoring from a checkpoint. This way,
we can correctly read all records when restoring from a checkpoints, even if
the cache-block size is different.

Note, that it is only possible to restore from a checkpoint if the
desired cache-block size is smaller or equal to the cache-block size
when the checkpoint was taken; we can split one larger request into
multiple small ones, but it is not reliable to do the opposite.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-04-19 09:00:30 -05:00
Nilay Vaish
097aadc2cd config: ruby: remove memory controller from network test
It is not in use and not required as such.
2014-04-19 09:00:30 -05:00
Anthony Gutierrez
5ab6bdc1ec arm: set default kernels for VExpress_EMM and VExpress_EMM64 2014-04-14 19:30:24 -04:00
Andreas Hansson
c970c28af1 scons: Fix python-config parsing by adding strip()
This patch fixes an issue with the way the python-config path is
parsed, as it caused issues on systems where a newline ended up being
included in the path.
2014-04-13 10:07:55 -04:00
Gedare Bloom
ca90a54476 config: add num-work-ids command line option
Adds the parameter --num-work-ids to Options.py and reads the parameter
into the System params in Simulation.py. This parameter enables setting
the number of possible work items to different than 16. Support for this
parameter already exists in src/sim/System.py, so this changeset only
affects the Python config files.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-04-10 13:43:33 -05:00
Stian Hvatum
698c4c792d scons: compile on systems where python2 and python3 co-exist
Compile gem5 on systems where python2 and python3 co-exists without any
changes in path. python2-config is chosen over python-config if it exists.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-04-10 13:40:15 -05:00
Andreas Sandberg
02b51afb7e kvm, x86: Add initial support for multicore simulation
Simulating a SMP or multicore requires devices to be shared between
multiple KVM vCPUs. This means that locking is required when accessing
devices. This changeset adds the necessary locking to allow devices to
execute correctly. It is implemented by temporarily migrating the KVM
CPU to the VM's (and devices) event queue when handling
MMIO. Similarly, the VM migrates to the interrupt controller's event
queue when delivering an interrupt.

The support for fast-forwarding of multicore simulations added by this
changeset assumes that all devices in a system are simulated in the
same thread and each vCPU has its own thread. Special care must be
taken to ensure that devices living under the CPU in the object
hierarchy (e.g., the interrupt controller) do not inherit the parent
CPUs thread and are assigned to device thread. The KvmVM object is
assumed to live in the same thread as the other devices in the system.
2014-04-09 16:01:58 +02:00
Andreas Sandberg
221f4f232a dev: Protect PollEvent processing when running in parallel mode
The calling thread is undefined when the PollQueue services events.
This implies that PollEvents need to handle the case where they are
processed from a different thread than the thread that created the
event. This changeset adds temporary event queue migrations to the VNC
server, the ethernet tap device, and the terminal to protect them from
inter-thread calls.
2014-04-09 16:01:43 +02:00
Nilay Vaish
d805e42b81 ruby: slicc: change enqueue statement
As of now, the enqueue statement can take in any number of 'pairs' as
argument.  But we only use the pair in which latency is the key.  This
latency is allowed to be either a fixed integer or a member variable of
controller in which the expression appears.  This patch drops the use of pairs
in an enqueue statement.  Instead, an expression is allowed which will be
interpreted to be the latency of the enqueue.  This expression can anything
allowed by slicc including a constant integer or a member variable.
2014-04-08 13:26:30 -05:00
Nilay Vaish
e689c00b16 ruby: coherence protocols: drop the phrase IntraChip
The phrase is no longer valid since we do not distinguish between
inter and intra chip communication.
2014-04-08 13:26:29 -05:00
Andreas Sandberg
838bcd3b19 sim: Add the ability to lock and migrate between event queues
We need the ability to lock event queues to enable device accesses
across threads. The serviceOne() method now takes a service lock prior
to handling a new event. By locking an event queue, a different
thread/eq can effectively execute in the context of the locked event
queue. To simplify temporary event queue migrations, this changeset
introduces the EventQueue::ScopedMigration class that unlocks the
current event queue, locks a new event queue, and updates the current
event queue variable.

In order to prevent deadlocks, event queues need to be released when
waiting on barriers. This is implemented using the
EventQueue::ScopedRelease class. An instance of this class is, for
example, used in the BaseGlobalEvent class to release the event queue
when waiting on the synchronization barrier.

The intended use for this functionality is when devices need to be
accessed across thread boundaries. For example, when fast-forwarding,
it might be useful to run devices and CPUs in separate threads. In
such a case, the CPU locks the device queue whenever it needs to
perform IO.  This functionality is primarily intended for KVM.

Note: Migrating between event queues can lead to non-deterministic
timing. Use with extreme care!

--HG--
extra : rebase_source : 23e3a741a1fd73861d1339782dbbe1bc76285315
2014-04-03 11:22:49 +02:00
Anthony Gutierrez
e553a7bfa7 ext: add McPAT source
this patch adds the source for mcpat, a power, area, and timing modeling
framework.
2014-04-01 12:44:30 -04:00
Anthony Gutierrez
8d665ee166 arm: fix typos in makefile for ARM m5 util and link statically
1) fixes a typo for clean target libgemOpJni.so -> libgem5OpJni.so
2) addes jni_gem5Op.h to clean since it is added during make
3) links the m5 utility statically since it won't work on some images otherwise
2014-04-01 12:35:31 -04:00
Nilay Vaish
d6542d7758 configs: use SimpleMemory when using ruby in se mode
A recent changeset altered the default memory class to DRAMCtrl.  In se mode,
ruby uses the physical memory to check if a given address is within the bounds
of the physical memory.  SimpleMemory is enough for this.  Moreover,
SimpleMemory does not check whether it is connected or not, something which
DRAMCtrl does.
2014-04-01 11:17:46 -05:00
Marco Elver
b884fcf412 cpu: o3: lsq: Fix TSO implementation
This patch fixes violation of TSO in the O3CPU, as all loads must be
ordered with all other loads. In the LQ, if a snoop is observed, all
subsequent loads need to be squashed if the system is TSO.

Prior to this patch, the following case could be violated:

 P0         | P1          ;
 MOV [x],mail=/usr/spool/mail/nilay | MOV EAX,[y] ;
 MOV [y],mail=/usr/spool/mail/nilay | MOV EBX,[x] ;

exists (1:EAX=1 /\ 1:EBX=0) [is a violation]

The problem was found using litmus [http://diy.inria.fr].

Committed by: Nilay Vaish <nilay@cs.wisc.edu
2014-03-25 13:15:04 -05:00
Andreas Hansson
8b4b1dcb86 stats: Update stats for DRAM changes
This patch updates the stats to reflect the changes to the DRAM
controller.
2014-03-23 11:12:19 -04:00
Andreas Hansson
a00383a40a mem: Track DRAM read/write switching and add hysteresis
This patch adds stats for tracking the number of reads/writes per bus
turn around, and also adds hysteresis to the write-to-read switching
to ensure that the queue does not oscilate around the low threshold.
2014-03-23 11:12:14 -04:00
Andreas Hansson
7c18691db1 mem: Rename SimpleDRAM to a more suitable DRAMCtrl
This patch renames the not-so-simple SimpleDRAM to a more suitable
DRAMCtrl. The name change is intended to ensure that we do not send
the wrong message (although the "simple" in SimpleDRAM was originally
intended as in cleverly simple, or elegant).

As the DRAM controller modelling work is being presented at ISPASS'14
our hope is that a broader audience will use the model in the future.

--HG--
rename : src/mem/SimpleDRAM.py => src/mem/DRAMCtrl.py
rename : src/mem/simple_dram.cc => src/mem/dram_ctrl.cc
rename : src/mem/simple_dram.hh => src/mem/dram_ctrl.hh
2014-03-23 11:12:12 -04:00
Andreas Hansson
3dd1587afc mem: Change memory defaults to be more representative
Make the default memory type DDR3-1600 x64, and use the open-adaptive
page policy. This change is aiming to ensure that users by default are
using a realistic memory system.
2014-03-23 11:12:10 -04:00
Wendy Elsasser
bbbae677ed mem: Add close adaptive paging policy to DRAM controller model
This patch adds a second adaptive page policy to the DRAM controller,
closing the page unless there are already queued accesses to the open
page.
2014-03-23 11:12:08 -04:00
Andreas Hansson
03a1aed803 mem: DRAM controller tidying up
Minor tidying up and removing of redundant code, including the
printing of queue state every million accesses.
2014-03-23 11:12:06 -04:00
Andreas Hansson
bc83eb2197 mem: Fix bug in DRAM bytes per activate
This patch ensures that we do not sample the bytes per activate when
the row has already been closed.
2014-03-23 11:12:05 -04:00
Andreas Hansson
116985d661 mem: Limit the accesses to a page before forcing a precharge
This patch adds a basic starvation-prevention mechanism where a DRAM
page is forced to close after a certain number of accesses. The limit
is combined with the open and open-adaptive page policy and if reached
causes an auto-precharge.
2014-03-23 11:12:03 -04:00
Andreas Hansson
6557741311 mem: Make DRAM write queue draining more aggressive
This patch changes the triggering condition for the write draining
such that we grab the opportunity to issue writes if there are no
reads waiting (as opposed to waiting for the writes to reach the high
threshold). As a result, we potentially drain some of the writes in read
idle periods (if any).

A low threshold is added to be able to control how many write bursts
are kept in the memory controller queue (acting as on-chip storage).

The high and low thresholds are updated to sensible values for a 32/64
size write buffer. Note that the thresholds should be adjusted along
with the queue sizes.

This patch also adds some basic initialisation sanity checks and moves
part of the initialisation to the constructor.
2014-03-23 11:12:01 -04:00
Andreas Hansson
7d883df7e5 config: Add a DRAM efficiency-sweep script
This patch adds a configuration that simplifies evaluation of DRAM
controller configurations by automating a sweep of stride size and
bank parallelism. It works in a rather unconventional way, as it needs
to print the traffic generator stimuli based on the memory
organisation. Hence, it starts by configuring the memory, then it
prints a traffic-generator config file, and loads it.

The resulting stats have one period per data point, identified by the
stride size, and the number of banks being used.
2014-03-23 11:12:00 -04:00
Neha Agarwal
364a51181e cpu: DRAM Traffic Generator
This patch enables a new 'DRAM' mode to the existing traffic
generator, catered to generate specific requests to DRAM based on
required hit length (stride size) and bank utilization. It is an add on
to the Random mode.

The basic idea is to control how many successive packets target the
same page, and how many banks are being used in parallel. This gives a
two-dimensional space that stresses different aspects of the DRAM
timing.

The configuration file needed to use this patch has to be changed as
follow: (reference to Random Mode, LPDDR3 memory type)

'STATE 0 10000000000 RANDOM 50 0 134217728 64 3004 5002 0'
-> 'STATE 0 10000000000 DRAM 50 0 134217728 32 3004 5002 0 96 1024 8 6 1'

The last 4 parameters to be added are:
<stride size (bytes), page size(bytes), number of banks available in DRAM,
    number of banks to be utilized, address mapping scheme>

The address mapping information is used to get the stride address
stream of the specified size and to know where to find the bank
bits. The configuration file has a parameter where '0'-> RoCoRaBaCh,
'1'-> RoRaBaCoCh/RoRaBaChCo address-mapping schemes. Note that the
generator currently assumes a single channel and a single rank. This
is to avoid overwhelming the traffic generator with information about
the memory organisation.
2014-03-23 11:11:58 -04:00
Neha Agarwal
43abaf518f mem: DDR3 config for comparing with DRAMSim2
This patch adds a new DDR3 configuration to match with the parameters
that are specified in one of the DDR3 configs used in DRAMSim2.
2014-03-23 11:11:56 -04:00
Andreas Hansson
7e7b67472a mem: More descriptive address-mapping scheme names
This patch adds the row bits to the name of the address mapping
schemes to make it more clear that all the current schemes places the
row bits as the most significant bits.
2014-03-23 11:11:53 -04:00
Curtis Dunham
a3d582f8e6 scons: Shush scons
make 'scons -s' actually silent.
2014-03-23 11:11:51 -04:00
Stan Czerniawski
4f77bc230a misc: Fix -q (quiet) flag
Check the right flag.
2014-03-23 11:11:49 -04:00
Andreas Hansson
9ac4f781ec ruby: Move Ruby debug flags to ruby dir and remove stale options
This patch moves the Ruby-related debug flags to the ruby
sub-directory, and also removes the state SConsopts that add the
no-longer-used NO_VECTOR_BOUNDS_CHECK.
2014-03-23 11:11:48 -04:00
Andreas Hansson
4dbffeb987 util: Add support for detection of gzipped packet traces
This patch adds support for automatically detecting a gzipped packet
trace, thus accepting either a compressed or uncompressed trace.
2014-03-23 11:11:46 -04:00
Andreas Hansson
9f018d2f5a mem: Include the DRAMSim2 wrapper in NULL build
This patch makes sure DRAMSim2 is included in a build of the NULL ISA.
2014-03-23 11:11:44 -04:00
Andreas Hansson
7fc4d14699 ext: Fix typo in DRAMSim2 SConscript
This patch fixes a typo in the SConscript which caused the DRAMSim2
sources to be built without the appropriate flags.
2014-03-23 11:11:42 -04:00
Sascha Bischoff
548d47ea2c mem: CommMonitor trace warn on non-timing mode
Add a warning to the CommMonitor which will alert the user if they try
and record a trace when the system is not in timing mode.
2014-03-23 11:11:40 -04:00
Stan Czerniawski
e18d0e04a2 cpu: Add basic check to TrafficGen initial state
Prevent incomplete configuration of TrafficGen class from causing
segmentation faults. If an 'INIT' line is not present in the
configuration file then the currState variable will remain
uninitialized which may result in a crash.
2014-03-23 11:11:39 -04:00
Andrew Bardsley
0c001e729a dev: Fix IsaFake's cxx_header setting
cxx_header was set incorrectly on IsaFake
2014-03-23 11:11:37 -04:00
Eric Van Hensbergen
7630168a75 arm: m5ops readfile64 args broken, offset coming through garbage
There were several sections of the m5ops code which were
essentially copy/pasted versions of the 32-bit code. The
problem is that some of these didn't account fo4 64-bit
registers leading to arguments being in the wrong registers.
This patch addresses the args for readfile64, writefile64,
and addsymbol64 -- all of which seemed to suffer from a
similar set of problems when moving to 64-bit.
2014-03-23 11:11:34 -04:00
Andreas Hansson
5093e58dc2 base: Fix error message time unit (cycle -> tick)
This patch fixes the unit used in all error messages.
2014-03-23 11:11:32 -04:00
Nilay Vaish
83d09ee215 stats: updates due to changes to ruby config scripts
These updates to ruby regression stats are due to renaming piobus to iobus
and dropping piobus in the se mode.
2014-03-20 09:16:35 -05:00
Nilay Vaish
52a83c1d0e ruby: consumer: avoid accessing wakeup times when waking up
Each consumer object maintains a set of tick values when the object is supposed
to wakeup and do some processing.  As of now, the object accesses this set both
when scheduling a wakeup event and when the object actually wakes up.  The set
is accessed during wakeup to remove the current tick value from the set.  This
functionality is now being moved to the scheduling function where ticks are
removed at a later time.
2014-03-20 09:14:14 -05:00
Nilay Vaish
4b67ada89e ruby: garnet: convert network interfaces into clocked objects
This helps in configuring the network interfaces from the python script and
these objects no longer rely on the network object for the timing information.
2014-03-20 09:14:14 -05:00
Nilay Vaish
4f7ef51efb ruby: slicc: code refactor 2014-03-20 09:14:14 -05:00
Nilay Vaish
b5cc4c7604 config: ruby: rename _cpu_ruby_ports to _cpu_ports 2014-03-20 09:14:14 -05:00
Nilay Vaish
f2059f8399 config: fs.py: move creating of test/drive systems to functions
The code that creates test and drive systems is being moved to separate
functions so as to make the code more readable.  Ultimately the two
functions would be combined so that the replicated code is eliminated.
2014-03-20 09:14:08 -05:00
Nilay Vaish
d5b5d89b34 config: remove ruby_fs.py
The patch removes the ruby_fs.py file.  The functionality is being moved to
fs.py.  This would being ruby fs simulations in line with how ruby se
simulations are started (using --ruby option).  The alpha fs config functions
are being combined for classing and ruby memory systems.  This required
renaming the piobus in ruby to iobus.  So, we will have stats being renamed
in the stats file for ruby fs regression.
2014-03-20 08:03:09 -05:00
Nilay Vaish
9b3418d163 ruby: no piobus in se mode
Piobus was recently added to se scripts for ruby so that the interrupt
controller can be connected to something (required since the interrupt
controller sends address range messages).  This patch removes the piobus
and instead, the pio port of ruby port will now ignore the range change
messages in se mode.
2014-03-20 08:03:09 -05:00
Nilay Vaish
a20fbdfc23 config: ruby: remove piobus from protocols
This patch removes the piobus from the protocol config files.  The ports
are now connected to the piobus in the Ruby.py file.
2014-03-17 17:40:15 -05:00
Nilay Vaish
f7e7fa6d90 ruby: remove some of the unnecessary code 2014-03-17 17:40:14 -05:00
Andreas Sandberg
11ffa379ab kvm: Clean up signal handling
KVM used to use two signals, one for instruction count exits and one
for timer exits. There is really no need to distinguish between the
two since they only trigger exits from KVM. This changeset unifies and
renames the signals and adds a method, kick(), that can be used to
raise the control signal in the vCPU thread. It also removes the early
timer warning since we do not normally see if the signal was
delivered.

--HG--
extra : rebase_source : cd0e45ca90894c3d6f6aa115b9b06a1d8f0fda4d
2014-03-16 17:40:58 +01:00