Commit graph

24 commits

Author SHA1 Message Date
Ali Saidi
886f905785 added total bytes/bandwidth/packets formulas to nics
cleaned up stability code and wrote some better help for stats.py
fixed sample bug in info.py

dev/ns_gige.cc:
dev/ns_gige.hh:
dev/sinic.cc:
dev/sinic.hh:
    add total bandwidth/packets/bytes stats
util/stats/info.py:
    fixed samples bug
util/stats/stats.py:
    cleaned up stability code and wrote a bit better help

--HG--
extra : convert_revision : cae06f4fac744d7a51ee0909f21f03509151ea8f
2005-01-19 18:40:02 -05:00
Nathan Binkert
3ece6ab029 New and improved configuration mechanism. No more writing of
wierd ini files.  The ini files are still used as an intermediate step,
but a sophisticated python library exists to help build them more
easily.

SConscript:
    add the new embedded file stuff
    remove all of the old object description junk
base/inifile.cc:
base/inifile.hh:
    get rid of findDefault and findAppend since they were the source
    of much evil.
base/trace.cc:
    For now, if we don't have the dprintf_stream set up, dump
    to standard out.  We probably want a command line option
    for this.
dev/alpha_console.cc:
    PioDevice now takes a platform parameter.
    All PioDevices must have a pio_latency parameter.  We stick
    a dummy parameter in here for now until we get rid of the
    builder stuff.
dev/alpha_console.hh:
    don't need Platform anymore
dev/baddev.cc:
    PioDevice now takes a platform parameter.
    All PioDevices must have a pio_latency parameter.  We stick
    a dummy parameter in here for now until we get rid of the
    builder stuff. Same for the platform parameter, though we just
    pass the PioDevice a null parameter since it isn't used by
    this device and it's quicker.
dev/baddev.hh:
    fix #include guards
dev/etherlink.cc:
    rename parameters.
dev/ethertap.cc:
    rename parameters
dev/ide_ctrl.cc:
    All devices need an address even if it will get overwritten later.
dev/ide_disk.cc:
    use an enum for the drive ID stuff.
    rename disk_delay -> delay
    Actually, I think that we should implement "cable select" and
    have the controller tell the drive what it is.
dev/io_device.cc:
dev/io_device.hh:
    All IO devices take a Platform *
dev/ns_gige.cc:
    all devices need an io_bus.  rename header_bus to io_bus
    We don't need stuff for the interrupt controller since
    it's all in the platform now.
dev/ns_gige.hh:
    We don't need stuff for the interrupt controller now since
    it's all in the platform.
dev/pciconfigall.cc:
    Pass a dummy NULL to the PioDevice for the platform since
    we don't need one.
dev/pcidev.cc:
    Move a bunch of common functionality into the PciDev
dev/platform.hh:
    remove unneeded code
dev/tsunami.cc:
    remove unused param
dev/tsunami_cchip.cc:
    pass platform pointer
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart.cc:
    pass platform variable
dev/uart.hh:
    don't need to keep a platform pointer.  it's in the base class
kern/linux/linux_system.cc:
kern/tru64/tru64_system.cc:
    rename some parameters
sim/builder.cc:
    clean up builder code. use more parameters from the
    config node.  all sections with a type= are now created,
    the old mechanisms no longer work
sim/builder.hh:
    remove some extra variables since they are found in the ConfigNode
sim/main.cc:
    add a quick hack command line argument -X to dump out the
    embedded files.  (probably should be fixed up a little.)
    accept .mpy files
    printing to the streams has to happen after the hierarchy
    is built since we're moving away from param contexts
sim/param.cc:
    add parsing support for ranges
sim/process.cc:
    isValid isn't very useful anymore.  interpret the names
    stdout, stderr, cout, cerr for the file descriptors
sim/pyconfig/SConscript:
    Add Action handlers for creating an embedded python file
    and for creating an embedded C file.

    use these action handlers to embed all objects found in the objects
    tree into the binary along with the importer and the m5config stuff
sim/pyconfig/m5config.py:
    Major changes to the original configuration file generator.  These
    changes largely involve implementing copy-on-write like semantics
    for all of the SimObjects.  Real documentation must be written.
sim/universe.cc:
    Universe becomes a SimObject since we don't really have the notion of
    param contexts in the python code.

--HG--
rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py
extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
2005-01-15 04:12:25 -05:00
Lisa Hsu
a8a7eb1c2f add a bunch of stats for interrupt classification, coalescing characterization, and dropped packets.
--HG--
extra : convert_revision : 421af424ec104afc352c073408a166fce6a31c70
2004-11-18 15:46:01 -05:00
Nathan Binkert
4760ae46c6 Use the new PacketFifo class to avoid manual calculations
--HG--
extra : convert_revision : afa193904b7ed4d5e5c50e9dcb78e8e855b00ecc
2004-11-13 16:52:08 -05:00
Nathan Binkert
acb98fb0f6 we shouldn't ever pass around references to PacketPtrs,
const references are ok, or pass by value.

--HG--
extra : convert_revision : 7280a1c7d22b9294fddbe50f02f6f4c6ca9b2e5b
2004-11-13 16:33:16 -05:00
Nathan Binkert
b031888038 Use parameter structs for initialization so it's easier
to add new devices.  Abstract the Platform more so that
it is unnecessary to know know platform specifics for
interrupting or translating PCI DMA addresses.

dev/ide_ctrl.cc:
    convert to parameter struct for initialization
    use the interrupt functions in the PciDev base class
    convert from tsunami to using platform
    We don't need an interrupt controller here.
dev/ide_ctrl.hh:
    don't use Tsunami, use Platform
    make the IdeDisk a friend so that it can access my plaform
    convert to parameter struct for construction
dev/ide_disk.cc:
    don't use tsunami references, but platform references
dev/ns_gige.cc:
    Convert to parameter struct for initialzation. Use code in
    base class for interrupts so we don't need to know anything
    about the platform. Don't need an IntrControl *.
dev/ns_gige.hh:
    We don't need a Tsunami * anymore
    convert to a parameter struct for construction
dev/pcidev.cc:
    deal with new parameter struct
dev/pcidev.hh:
    - Move all of the configuration parameters into a param struct
    that we can pass into the constructor.
    - Add a Platform * for accessing new generic interrupt post/clear
    and dma address translation fuctions
    - Create functions for posting/clearing interrupts and translating
    dma addresses
dev/platform.cc:
    have default functions that panic on pci calls
dev/platform.hh:
    don't make the pci stuff pure virtual, but rather provide
    default implementations that panic.  Also, add dma address
    translation.
dev/tsunami.cc:
    this-> isn't necessary here.
    add pci address translation
dev/tsunami.hh:
    implement the pciToDma address translation

--HG--
extra : convert_revision : 7db27a2fa1f1bd84704921ec7ca0280b5653c43e
2004-11-13 15:45:22 -05:00
Nathan Binkert
a7fd7729ab flesh out the TCP/IP/Ethernet support
base/refcnt.hh:
    reorganize the RefCountingPtr a little bit to make it easier
    to derive from
dev/etherpkt.hh:
    this doesn't belong here. use the inet.hh stuff
dev/ns_gige.cc:
dev/ns_gige.hh:
    use newer features in the tcp/ip/ethernet stuff

--HG--
extra : convert_revision : 32c1953c95655c1f4c70e0d8adedfd94beead624
2004-10-23 16:18:44 -04:00
Nathan Binkert
a58b834c8e Clean up network header stuff and make it more generic. Use
libdnet when we can instead of our own home grown stuff.

SConscript:
    separate the crc code into its own file
base/inet.cc:
    move the crc stuff to crc.cc
    add generic code for calculating ip/tcp/udp checksums
base/inet.hh:
    -  move crc stuff to crc.hh
    -  #include all of the libdnet stuff.  (this makes base/inet.hh the
    only file you need to include if you want to use this kind of stuff.)
    -  Wrap some of the libdnet structs to get easier access to structure
    members.  These wrappers will automatically deal with masking/shifting/
    byte-swapping.
base/refcnt.hh:
    If one derives from RefCountingPtr, they should have access to
    the internal data pointer.
build/SConstruct:
    make #include of dnet stuff work
dev/etherlink.cc:
dev/ethertap.cc:
dev/ethertap.hh:
    EtherPacket -> PacketData
dev/etherpkt.cc:
    EtherPacket -> PacketData
    add a function for populating extra info about a packet.
    Basically just gives pointers to ethernet/ip/tcp/udp headers
    if they exist.
dev/etherpkt.hh:
    EtherPacket -> PacketData
    remove most of the packet header stuff from teh PacketData
    class and just add a few generic functions for grabbing various
    headers that may exist in the packet.  The old functionality is
    contained in the headers.
dev/ns_gige.cc:
    -  IP -> Ip, UDP -> Udp, TCP ->Tcp when used in variable names
    -  get rid of our own byte swapping functions.
    -  whack checksum code and use libdnet version.
    -  Get pointers to the various packet headers and grab info from
    those headers.  (The byte swapping in the headers now.)
    -  Add stats for Udp Checksums
dev/ns_gige.hh:
    use libdnet for checksum code.
    IP -> Ip, TCP -> Tcp in variable names
    add stats for UDP checksums

--HG--
extra : convert_revision : 96c4160e1967b7c0090acd456df4a76e1f3aab53
2004-09-20 10:43:53 -04:00
Nathan Binkert
e60a4c58ee Fix a few bugs in the receive state machine. In doing back to tracking
whether or not the state machine is enabled rather than tracking the
specific instance of trying to halt the state machine.

dev/ns_gige.cc:
    change back to tracking the state machine's enableness instead of
    whether or not it is trying to halt.  Also fix a major bug that
    would cause the NIC to drop packets when the rx state machine was
    idle, but enabled.
    Fix a couple other bugs in the state machine where the idle interrupt
    would happen at the wrong time.
    Add a warning to deal with improper values of intrTick
dev/ns_gige.hh:
    We need to keep track of whether the state machine is enabled
    or not separately from the control register since the bits don't
    always reflect the truth.

--HG--
extra : convert_revision : 20056b225fa62a0744473babfd693506aa5f29b2
2004-07-30 11:29:45 -04:00
Nathan Binkert
da2566f014 style
--HG--
extra : convert_revision : 7489726b6c7bd11af603a448e4ff56c1e46139fe
2004-07-26 23:10:20 -04:00
Nathan Binkert
0650e4a43f When a packet has finished transmitting, kick the state
machine too.  The fifo may have been full and we want
to get another packet into it if we can.

--HG--
extra : convert_revision : 8f57294bd18f5eccb900118f2de83a4ccfd20dbb
2004-07-23 12:19:27 -04:00
Nathan Binkert
13f8dc981f make the cache access latency a parameter that is based on bus
ticks for the most commonly accessed devices.

dev/baddev.cc:
    Get rid of the constant cache access latency.
    For unimportant devices, don't add any latency.
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ns_gige.cc:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
dev/uart.cc:
dev/uart.hh:
    make the cache access latency a parameter that is based on bus
    ticks.
dev/io_device.cc:
dev/io_device.hh:
    add an io latency variable
dev/ns_gige.hh:
    this moved to io_device.hh

--HG--
extra : convert_revision : 4883130feeaef48abee492eddf0b8eb40eb94789
2004-07-12 22:58:22 -04:00
Lisa Hsu
f857bd9dff make tx/rx fifo size a param, also fix the empty dma problem by adjusting the state machine.
dev/ns_gige.cc:
    make tx/rx fifo sizes a param. the default is 128K for each.  also, make the state machine not move onto txFragRead if there is no room in the txfifo for data.
dev/ns_gige.hh:
    make tx/rx fifo size a param

--HG--
extra : convert_revision : ed91eb31c2b21d4cdc6de87d8641df6197be5209
2004-07-12 16:09:52 -04:00
Lisa Hsu
7ca7b343ff almost forgot to do this - hope it doesn't mess up schedule.
dev/ns_gige.cc:
dev/ns_gige.hh:
    add the stats nate wanted

--HG--
extra : convert_revision : b59d586def7df31741b53cdb59cf3b19253caf26
2004-07-04 16:47:07 -04:00
Lisa Hsu
e05dbb5116 l
base/traceflags.py:
    added some more traceflags for ethernet to break it up better
dev/etherpkt.hh:
    since we are not network host order, must reverse bytes for these typechecks.

    also, overload isTcp/UdpPkt to take an argument so you don't have to reget the ip header if you've already got one.
dev/ns_gige.cc:
    1) add some functions that reverse Endianness so we can generate adn evaluate checksum adn dprintf data accurately/more understandably

    2) forget about the implementation of fifo fill/drain thresholds, it's not used by the driver much, nor does it matter with use sending/receiving in whole packets anyway.
    get rid of teh associated variables.

    3) get rid of txFifoCnt the variable, it's redundant and unnecessary, just use txFifoAvail.

    4) change io_enable to ioEnable, just to be picky.

    5) modify some DPRINTF's to be clearer, also added a lot, and spread them into better traceflag categories

    6) fix the device bug!  it's the intrTick = 0 at teh beginning of cpuInterrupt().

    7) clear some bools in regsReset() so they don't holdover wrong state

    8) fix pseudo header generation for Tcp checksumming to account for network order
dev/ns_gige.hh:
    change io_enable to ioEnable, get rid of fill/drain thresh related variables and txFifoCnt, which is redundant

--HG--
extra : convert_revision : c538b75731f3c9e04354f57e6df9a40aeca5096d
2004-06-21 17:25:18 -04:00
Lisa Hsu
bfcb088281 minor mods for mimicking NS83820 functionality
dev/ide_ctrl.cc:
    generalize these #defs
dev/ide_ctrl.hh:
    put these in pcireg.h
dev/ns_gige.cc:
    do i need io_enable?  and assert will fail if i actually need to implement it, which may give clue as to wehtehr i need to implmeent the mem_enable and bm_enable stuff.
dev/ns_gige.hh:
    implement this in case it's needed
dev/pcireg.h:
    put these defs in pcireg instead

--HG--
extra : convert_revision : 5e3581b5da17410f943907139bd479f15d2231e8
2004-06-12 14:24:20 -04:00
Lisa Hsu
e5dba1642b fix serialization
dev/ns_gige.cc:
    fix serialization and move regsReset into the cc file
dev/ns_gige.hh:
    put regsReset into cc instead of here in hh

--HG--
extra : convert_revision : 3a8796fa583e0765503104a9dbe28cc69f1a8fa9
2004-06-11 15:26:21 -04:00
Andrew Schultz
0379a27896 Merge zizzer:/bk/linux
into zower.eecs.umich.edu:/z/alschult/DiskModel/linux

--HG--
extra : convert_revision : b23a1d1a79ac5c593150d269d0523c474cf6a4a0
2004-06-04 15:13:04 -04:00
Andrew Schultz
d270ea851a Changes to support serialization with PCI devices
dev/ide_ctrl.cc:
    Properly serialize/unserialize the PciDev base class to get it to remap
    the MMU
dev/ns_gige.cc:
dev/ns_gige.hh:
    Remove the "addr" paramter from the constructor and change the device
    to use PCI based MMU mappings only
dev/pciconfigall.cc:
    Change comments
dev/pcidev.cc:
    Properly setup the MMU after a serialize

--HG--
extra : convert_revision : 4b2e7ba58e3c24fac1ff6f80635e704d6ecc0eff
2004-06-04 15:12:27 -04:00
Ali Saidi
9ce632d1f0 Updated copyright on Tsunami and kern/linux files.
dev/baddev.cc:
dev/baddev.hh:
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ide_disk.cc:
dev/ide_disk.hh:
dev/ns_gige.cc:
dev/ns_gige.hh:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/pcidev.cc:
dev/pcidev.hh:
dev/pcireg.h:
dev/platform.cc:
dev/platform.hh:
dev/tsunami.cc:
dev/tsunami.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
kern/linux/linux.hh:
kern/linux/linux_syscalls.cc:
kern/linux/linux_syscalls.hh:
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
    Updated copyright
dev/tsunamireg.h:
    Updated copyright and fixed a ULL

--HG--
extra : convert_revision : 4800bd227c7064044ee98169d6a91f74c791956f
2004-06-04 13:43:50 -04:00
Ali Saidi
391f228fda Changed name of lisa's device to NSgigE instead of Etherdev so it
doesn't conflict with the old ethernet driver name.

Added config file to try to boot Tru64 with Tsunami

Cleaned up kern/linux a bit more and fixed bug where we were using
Tru64 system calls

dev/ns_gige.cc:
dev/ns_gige.hh:
dev/tsunami.hh:
    Changed name of lisa's device to NSgigE instead of Etherdev so it
    doesn't conflict with the old ethernet driver name.
kern/linux/linux_syscalls.hh:
    the Syscalls still used the Tru64 calls, oops.. fixed.

--HG--
extra : convert_revision : dedd20686cc367ed37f31920f753566afbc69045
2004-05-25 15:59:54 -04:00
Nathan Binkert
62d756f253 rename namespace Statistics to Stats
--HG--
extra : convert_revision : 28f1703f8d7d8cf33fb952ae450f66bdba860fb7
2004-05-21 13:39:20 -04:00
Lisa Hsu
bf8de77465 This is where I'm at for Linux Ethernet before I head to Mexico.
base/range.hh:
    andrew thought this might be a bug.
dev/etherpkt.cc:
    don't need std:: since there is a using directive
dev/ns_gige.cc:
    update to new PIO and PCI system
dev/ns_gige.hh:
    update to deal with new PIO and PCI setup
dev/ns_gige_reg.h:
    Add some new #defines that I ended up needing
dev/pcidev.cc:
    some changes to the debugging printfs of pci device

--HG--
extra : convert_revision : 955ba8e8e1c418cfe1c6549dc3451ea091541556
2004-04-21 18:23:41 -04:00
Lisa Hsu
48e6ed48e0 first pass at ns_ethernet device. more will come later as i merge in nate's new ether infrastructure.
dev/etherpkt.hh:
    add some stuff for support of the NS ethernet device.

--HG--
extra : convert_revision : 51f6508463b6394055e3428a42b7de490a9ae6c1
2004-03-12 11:04:58 -05:00