This patch changes the use of pkg-config such that protobuf is still
evaluated with CheckLib even if it fails. This is to allow setups
where libprotobuf is available, but not configured through
protobuf. Moreover, if CheckLib fails to use libprotobuf then all the
tracing is disabled, but scons is allowed to continue with a warning.
Move the increment/decrement of wbOutstanding outside of the comparison
in incrWb and decrWb in the IEW. This also fixes a compiler bug with gcc
4.4.7, which incorrectly optimizes "-- ==" as "-=".
Note that clflush is only being enabled. It is not implemented
in actual. A warning is printed if the cpu encounters a clflush
instruction. We need to enable this instruction in cpuid since
JRE 1.7 tests for it.
This patch moves the contollers to be children of the ruby_system instead of
'system' under the python object hierarchy. This is so that these objects
can inherit some of the ruby_system's parameter values without resorting to
calling a global system pointer during run-time.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
This patch converts the panic() print outs in the Sequencer::wakeup()
call from ruby cycles to Ticks(). This makes it easier to debug deadlocks
with the ProtocolTrace flag so the issue time indicated in the panic message
can be quickly searched for.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
This patch was initiated so as to remove reference to g_system_ptr,
the pointer to Ruby System that is used for getting the current time.
That simple change actual requires changing a lot many things in slicc and
garnet. All these changes are related to how time is handled.
In most of the places, g_system_ptr has been replaced by another clock
object. The changes have been done under the assumption that all the
components in the memory system are on the same clock frequency, but the
actual clocks might be distributed.
Many Ruby structures inherit from the Consumer, which is used for scheduling
events. The Consumer used to relay on an Event Manager for scheduling events
and on g_system_ptr for time. With this patch, the Consumer will now use a
ClockedObject to schedule events and to query for current time. This resulted
in several structures being converted from SimObjects to ClockedObjects. Also,
the MessageBuffer class now requires a pointer to a ClockedObject so as to
query for time.
The changes made by the changeset 9376 were not quite correct. The patch made
changes to the code which resulted in decoder not getting initialized correctly
when the state was restored from a checkpoint.
This patch adds a startup function to each ISA object. For x86, this function
sets the required state in the decoder. For other ISAs, the function is empty
right now.
Used as a command in full-system scripts helps the user ensure the benchmarks have finished successfully.
For example, one can use:
/path/to/benchmark args || /sbin/m5 fail 1
and thus ensure gem5 will exit with an error if the benchmark fails.
When "-I" (maximum instruction number) and "-F" (fastforward instruction
number) are applied together, gem5 immediately exits after the cpu switching.
The reason is that multiple exit events may be generated in the same cycle by
Atomic CPU and inserted to mainEventQueue. However, mainEventQueue can only
serve one exit event in one cycle. Therefore, the rest exit events are left in
mainEventQueue without being descheduled or deleted, which causes gem5 exits
immediately after the system resumes by cpu switching.
The current implementation in gem5 just keeps a list of locks per cacheline.
Due to this, a store to a non-overlapping portion of the cacheline can cause an
LL/SC pair to fail. This patch simply adds an address range to the lock
structure, so that the lock is only invalidated if the store overlaps the lock
range.
Running with valgrind I noticed a use after free originating from
simple_mem.cc. It looks like this is a known issue and this additional call
site was missed in an earlier patch.
The DMA device sometimes calls the process() method on a completion
event directly instead of scheduling it on the current tick. This
breaks some devices that assume that the completion handler won't be
called until the current event handler has returned. Specifically, it
causes infinite recursion in the IdeDisk component because it does not
advance its chunk generator until after a dmaRead()/dmaWrite() has
returned. This changeset removes this mico-optimization and schedules
the event in the current tick instead. This way the semantics event
handling stay the same even when the delay is 0.
The number of arguments specified when calling parse_int_args() in
do_exit() is incorrect. This leads to stack corruption since it causes
writes past the end of the ints array.
Tick was not correctly wrapped for the stats system, and therefore it was not
possible to configure the stats dumping from the python scripts without
defining Ticks as long long. This patch fixes the wrapping of Tick by copying
the typemap of uint64_t to Tick.
Cleanup the serialization code for the simple CPUs and the O3 CPU. The
CPU-specific code has been replaced with a (un)serializeThread that
serializes the thread state / context of a specific thread. Assuming
that the thread state class uses the CPU-specific thread state uses
the base thread state serialization code, this allows us to restore a
checkpoint with any of the CPU models.
This changeset adds a set of tests that stress the CPU switching
code. It adds the following test configurations:
* tsunami-switcheroo-full -- Alpha system (atomic, timing, O3)
* realview-switcheroo-atomic -- ARM system (atomic<->atomic)
* realview-switcheroo-timing -- ARM system (timing<->timing)
* realview-switcheroo-o3 -- ARM system (O3<->O3)
* realview-switcheroo-full -- ARM system (atomic, timing, O3)
Reference data is provided for the 10.linux-boot test case. All of the
tests trigger a CPU switch once per millisecond during the boot
process.
The in-order CPU model was not included in any of the tests as it does
not support CPU handover.
This changeset inserts a TLB flush in BaseCPU::switchOut to prevent
stale translations when doing repeated switching. Additionally, the
TLB flushing functionality is exported to the Python to make debugging
of switching/checkpointing easier.
A simulation script will typically use the TLB flushing functionality
to generate a reference trace. The following sequence can be used to
simulate a handover (this depends on how drain is implemented, but is
generally the case) between identically configured CPU models:
m5.drain(test_sys)
[ cpu.flushTLBs() for cpu in test_sys.cpu ]
m5.resume(test_sys)
The generated trace should normally be identical to a trace generated
when switching between identically configured CPU models or
checkpointing and resuming.
When the classic gem5 cache sees an uncacheable memory access, it used
to ignore it or silently drop the cache line in case of a
write. Normally, there shouldn't be any data in the cache belonging to
an uncacheable address range. However, since some architecture models
don't implement cache maintenance instructions, there might be some
dirty data in the cache that is discarded when this happens. The
reason it has mostly worked before is because such cache lines were
most likely evicted by normal memory activity before a TLB flush was
requested by the OS.
Previously, the cache model would invalidate cache lines when they
were accessed by an uncacheable write. This changeset alters this
behavior so all uncacheable memory accesses cause a cache flush with
an associated writeback if necessary. This is implemented by reusing
the cache flushing machinery used when draining the cache, which
implies that writebacks are performed using functional accesses.
Previously, the O3 CPU could stop in the middle of a microcode
sequence. This patch makes sure that the pipeline stops when it has
committed a normal instruction or exited from a microcode
sequence. Additionally, it makes sure that the pipeline has no
instructions in flight when it is drained, which should make draining
more robust.
Draining is controlled in the commit stage, which checks if the next
PC after a committed instruction is in microcode. If this isn't the
case, it requests a squash of all instructions after that the
instruction that just committed and immediately signals a drain stall
to the fetch stage. The CPU then continues to execute until the
pipeline and all associated buffers are empty.
Currently, the atomic CPU can be in the middle of a microcode sequence
when it is drained. This leads to two problems:
* When switching to a hardware virtualized CPU, we obviously can't
execute gem5 microcode.
* Since curMacroStaticInst is populated when executing microcode,
repeated switching between CPUs executing microcode leads to
incorrect execution.
After applying this patch, the CPU will be on a proper instruction
boundary, which means that it is safe to switch to any CPU model
(including hardware virtualized ones). This changeset fixes a bug
where the multiple switches to the same atomic CPU sometimes corrupts
the target state because of dangling pointers to the currently
executing microinstruction.
Note: This changeset moves tick event descheduling from switchOut() to
drain(), which makes timing consistent between just draining a system
and draining /and/ switching between two atomic CPUs. This makes
debugging quite a lot easier (execution traces get the same timing),
but the latency of the last instruction before a drain will not be
accounted for correctly (it will always be 1 cycle).
Note 2: This changeset removes so_state variable, the locked variable,
and the tickEvent from checkpoints since none of them contain state
that needs to be preserved across checkpoints. The so_state is made
redundant because we don't use the drain state variable anymore, the
lock variable should never be set when the system is drained, and the
tick event isn't scheduled.
Currently, the timing CPU can be in the middle of a microcode sequence
or multicycle (stayAtPC is true) instruction when it is drained. This
leads to two problems:
* When switching to a hardware virtualized CPU, we obviously can't
execute gem5 microcode.
* If stayAtPC is true we might execute half of an instruction twice
when restoring a checkpoint or switching CPUs, which leads to an
incorrect execution.
After applying this patch, the CPU will be on a proper instruction
boundary, which means that it is safe to switch to any CPU model
(including hardware virtualized ones). This changeset also fixes a bug
where the timing CPU sometimes switches out with while stayAtPC is
true, which corrupts the target state after a CPU switch or
checkpoint.
Note: This changeset removes the so_state variable from checkpoints
since the drain state isn't used anymore.
The thread context handover code used to break when multiple handovers
were performed during the same quiesce period. Previously, the thread
contexts would assign the TC pointer in the old quiesce event to the
new TC. This obviously broke in cases where multiple switches were
performed within the same quiesce period, in which case the TC pointer
in the quiesce event would point to an old CPU.
The new implementation deschedules pending quiesce events in the old
TC and schedules a new quiesce event in the new TC. The code has been
refactored to remove most of the code duplication.
Currently, we invalidate the cached miscregs in
TLB::unserialize(). The intended use of the drainResume() method is to
invalidate cached state and prepare the system to resume after a CPU
handover or (un)serialization. This patch moves the TLB miscregs
invalidation code to the drainResume() method to avoid surprising
behavior.
Since the page table walker only checks if a drain has completed in
doL1DescriptorWrapper() and doL2DescriptorWrapper(), it sometimes
looses track of a drain request if there is a squash. This changeset
adds a completeDrain() call after squashing requests in the pending
queue, which fixes this issue.
Commit can currently both commit and squash in the same cycle. This
confuses other stages since the signals coming from the commit stage
can only signal either a squash or a commit in a cycle. This changeset
changes the behavior of squashAfter so that it commits all
instructions, including the instruction that requested the squash, in
the first cycle and then starts to squash in the next cycle.
The defer_registration parameter is used to prevent a CPU from
initializing at startup, leaving it in the "switched out" mode. The
name of this parameter (and the help string) is confusing. This patch
renames it to switched_out, which should be more descriptive.
In order to see all registers independent of the current CPU mode, the
ARM architecture model uses the magic MISCREG_CPSR_MODE register to
change the register mappings without actually updating the CPU
mode. This hack is no longer needed since the thread context now
provides a flat interface to the register file. This patch replaces
the CPSR_MODE hack with the flat register interface.
This patch introduces the following sanity checks when switching
between CPUs:
* Check that the set of new and old CPUs do not overlap. Having an
overlap between the set of new CPUs and the set of old CPUs is
currently not supported. Doing such a switch used to result in the
following assertion error:
BaseCPU::takeOverFrom(BaseCPU*): \
Assertion `!new_itb_port->isConnected()' failed.
* Check that all new CPUs are in the switched out state.
* Check that all old CPUs are in the switched in state.
This patch cleans up the CPU switching functionality by making sure
that CPU models consistently call the parent on switchOut() and
takeOverFrom(). This has the following implications that might alter
current functionality:
* The call to BaseCPU::switchout() in the O3 CPU is moved from
signalDrained() (!) to switchOut().
* A call to BaseSimpleCPU::switchOut() is introduced in the simple
CPUs.
The O3 CPU used to copy its thread context to a SimpleThread in order
to do serialization. This was a bit of a hack involving two static
SimpleThread instances and a magic constructor that was only used by
the O3 CPU.
This patch moves the ThreadContext serialization code into two global
procedures that, in addition to the normal serialization parameters,
take a ThreadContext reference as a parameter. This allows us to reuse
the serialization code in all ThreadContext implementations.
