Previously, the O3 CPU could stop in the middle of a microcode
sequence. This patch makes sure that the pipeline stops when it has
committed a normal instruction or exited from a microcode
sequence. Additionally, it makes sure that the pipeline has no
instructions in flight when it is drained, which should make draining
more robust.
Draining is controlled in the commit stage, which checks if the next
PC after a committed instruction is in microcode. If this isn't the
case, it requests a squash of all instructions after that the
instruction that just committed and immediately signals a drain stall
to the fetch stage. The CPU then continues to execute until the
pipeline and all associated buffers are empty.
Currently, the atomic CPU can be in the middle of a microcode sequence
when it is drained. This leads to two problems:
* When switching to a hardware virtualized CPU, we obviously can't
execute gem5 microcode.
* Since curMacroStaticInst is populated when executing microcode,
repeated switching between CPUs executing microcode leads to
incorrect execution.
After applying this patch, the CPU will be on a proper instruction
boundary, which means that it is safe to switch to any CPU model
(including hardware virtualized ones). This changeset fixes a bug
where the multiple switches to the same atomic CPU sometimes corrupts
the target state because of dangling pointers to the currently
executing microinstruction.
Note: This changeset moves tick event descheduling from switchOut() to
drain(), which makes timing consistent between just draining a system
and draining /and/ switching between two atomic CPUs. This makes
debugging quite a lot easier (execution traces get the same timing),
but the latency of the last instruction before a drain will not be
accounted for correctly (it will always be 1 cycle).
Note 2: This changeset removes so_state variable, the locked variable,
and the tickEvent from checkpoints since none of them contain state
that needs to be preserved across checkpoints. The so_state is made
redundant because we don't use the drain state variable anymore, the
lock variable should never be set when the system is drained, and the
tick event isn't scheduled.
Currently, the timing CPU can be in the middle of a microcode sequence
or multicycle (stayAtPC is true) instruction when it is drained. This
leads to two problems:
* When switching to a hardware virtualized CPU, we obviously can't
execute gem5 microcode.
* If stayAtPC is true we might execute half of an instruction twice
when restoring a checkpoint or switching CPUs, which leads to an
incorrect execution.
After applying this patch, the CPU will be on a proper instruction
boundary, which means that it is safe to switch to any CPU model
(including hardware virtualized ones). This changeset also fixes a bug
where the timing CPU sometimes switches out with while stayAtPC is
true, which corrupts the target state after a CPU switch or
checkpoint.
Note: This changeset removes the so_state variable from checkpoints
since the drain state isn't used anymore.
The thread context handover code used to break when multiple handovers
were performed during the same quiesce period. Previously, the thread
contexts would assign the TC pointer in the old quiesce event to the
new TC. This obviously broke in cases where multiple switches were
performed within the same quiesce period, in which case the TC pointer
in the quiesce event would point to an old CPU.
The new implementation deschedules pending quiesce events in the old
TC and schedules a new quiesce event in the new TC. The code has been
refactored to remove most of the code duplication.
Currently, we invalidate the cached miscregs in
TLB::unserialize(). The intended use of the drainResume() method is to
invalidate cached state and prepare the system to resume after a CPU
handover or (un)serialization. This patch moves the TLB miscregs
invalidation code to the drainResume() method to avoid surprising
behavior.
Since the page table walker only checks if a drain has completed in
doL1DescriptorWrapper() and doL2DescriptorWrapper(), it sometimes
looses track of a drain request if there is a squash. This changeset
adds a completeDrain() call after squashing requests in the pending
queue, which fixes this issue.
Commit can currently both commit and squash in the same cycle. This
confuses other stages since the signals coming from the commit stage
can only signal either a squash or a commit in a cycle. This changeset
changes the behavior of squashAfter so that it commits all
instructions, including the instruction that requested the squash, in
the first cycle and then starts to squash in the next cycle.
The defer_registration parameter is used to prevent a CPU from
initializing at startup, leaving it in the "switched out" mode. The
name of this parameter (and the help string) is confusing. This patch
renames it to switched_out, which should be more descriptive.
In order to see all registers independent of the current CPU mode, the
ARM architecture model uses the magic MISCREG_CPSR_MODE register to
change the register mappings without actually updating the CPU
mode. This hack is no longer needed since the thread context now
provides a flat interface to the register file. This patch replaces
the CPSR_MODE hack with the flat register interface.
This patch introduces the following sanity checks when switching
between CPUs:
* Check that the set of new and old CPUs do not overlap. Having an
overlap between the set of new CPUs and the set of old CPUs is
currently not supported. Doing such a switch used to result in the
following assertion error:
BaseCPU::takeOverFrom(BaseCPU*): \
Assertion `!new_itb_port->isConnected()' failed.
* Check that all new CPUs are in the switched out state.
* Check that all old CPUs are in the switched in state.
This patch cleans up the CPU switching functionality by making sure
that CPU models consistently call the parent on switchOut() and
takeOverFrom(). This has the following implications that might alter
current functionality:
* The call to BaseCPU::switchout() in the O3 CPU is moved from
signalDrained() (!) to switchOut().
* A call to BaseSimpleCPU::switchOut() is introduced in the simple
CPUs.
The O3 CPU used to copy its thread context to a SimpleThread in order
to do serialization. This was a bit of a hack involving two static
SimpleThread instances and a magic constructor that was only used by
the O3 CPU.
This patch moves the ThreadContext serialization code into two global
procedures that, in addition to the normal serialization parameters,
take a ThreadContext reference as a parameter. This allows us to reuse
the serialization code in all ThreadContext implementations.
The entire O3 pipeline used to be initialized from init(), which is
called before initState() or unserialize(). This causes the pipeline
to be initialized from an incorrect thread context. This doesn't
currently lead to correctness problems as instructions fetched from
the incorrect start PC will be squashed a few cycles after
initialization.
This patch will affect the regressions since the O3 CPU now issues its
first instruction fetch to the correct PC instead of 0x0.
Some architectures map registers differently depending on their mode
of operations. There is currently no architecture independent way of
accessing all registers. This patch introduces a flat register
interface to the ThreadContext class. This interface is useful, for
example, when serializing or copying thread contexts.
After making the ISA an independent SimObject, it is serialized
automatically by the Python world. Previously, this just resulted in
an empty ISA section. This patch moves the contents of the ISA to that
section and removes the explicit ISA serialization from the thread
contexts, which makes it behave like a normal SimObject during
serialization.
Note: This patch breaks checkpoint backwards compatibility! Use the
cpt_upgrader.py utility to upgrade old checkpoints to the new format.
This patch adds checks to all CPU models to make sure that the memory
system is in the correct mode at startup and when resuming after a
drain. Previously, we only checked that the memory system was in the
right mode when resuming. This is inadequate since this is a
configuration error that should be detected at startup as well as when
resuming. Additionally, since the check was done using an assert, it
wasn't performed when NDEBUG was set (e.g., the fast target).
This patch adds support for the memInvalidate() drain method. TLB
flushing is requested by calling the virtual flushAll() method on the
TLB.
Note: This patch renames invalidateAll() to flushAll() on x86 and
SPARC to make the interface consistent across all supported
architectures.
The IIC replacement policy seems to be unused and has probably
gathered too much bit rot to be useful. This patch removes the IIC and
its associated cache parameters.
This patch removes the intNum and clock from the serialized scalars as
these are set by the Python parameters and should not be part of the
checkpoint.
This patch checks that the compiler in use is either gcc >= 4.4 or
clang >= 2.9. and enables building with --std=c++0x in all cases. As a
consequence, we can tidy up the hashmap and always have static_assert
available. If anyone wants to use alternative compilers, icc for
example supports c++0x to a similar level and could be added if
needed.
This patch opens up for a more elaborate use of c++0x features that
are present in gcc 4.4 and clang 2.9, e.g. auto typed variables,
variadic templates, rvalues and move semantics, and strongly typed
enums. There will be no going back on this one...
This patch simply prunes the SUNCC and ICC compiler options as they
are both sufficiently stale that they would have to be re-written from
scratch anyhow. The patch serves to clean things up before shifting to
a build environment that enforces basic c++11 compliance as done in
the following patch.
This patch changes the NS gige controller to have a non-clock, and
sets the default to 500 MHz. The blocks that could prevoiusly be
by-passed with a zero clock are now always present, and the user is
left with the option of setting a very high clock frequency to achieve
a similar performance.
Scons normally removes all environment variables that aren't
whitelisted from the build environment. This messes up things like
ccache, distcc, and the clang static analyzer. This changeset adds the
DISTCC_, CCACHE_, and CCC_ prefixes to the environment variable
whitelist.
Fixed check pointing of the framebuffer. Previously, the pixel size was not
considered in determining the size of the buffer to checkpoint. This patch
checkpoints the entire framebuffer instead of the first quarter.
At least gcc 4.4.3 seems to get confused by the use of func both as a
template parameter and a member variable in the M5VarArgsFault
class. This causes the value of the member variable func to be
unpredictable in M5VarArgsFault objects. This changeset renames the
template parameter to remove this ambiguity.
This patch adds basic merging of address ranges when determining which
address ranges should be reported in the configuration table. By
performing this merging it is possible to distribute an address range
across many memory channels (controllers). This is essential to enable
address interleaving.
This patch adds support for merging a vector of interleaved address
ranges into a contigous range. The functionality will be used in the
interconnect and the PhysicalMemory to transform interleaved memory
ranges to contigous ranges before passing them on.
The actual use of the merging is appearing in future patches.
This patch adds support for interleaving bits for the address
ranges. What was previously just a start and end address, now has an
additional three fields, for the high bit, and number of bits to use
for interleaving, and a match value to compare against. If the number
of interleaving bits is set to zero it is effectively disabled.
A number of convenience functions are added to the range to enquire
about the interleaving, its granularity and the number of stripes it
is part of.
This patch makes the all proxy traverse any potential list that is
encountered in the object hierarchy instead of only looking at
children that are SimObjects. An example of where this is useful is
when creating a multi-channel memory system as a list of controllers,
whilst ensuring that the memories are still visible in the system.
This patch cleans up the AddrRangeMap in preparation for the addition
of interleaving by removing unused code. The non-const editions of
find are never used, and hence the duplication is not needed.
This patch generalises the address range resolution for the I/O cache
and I/O bridge such that they do not assume a single memory. The patch
involves adding a parameter to the system which is then defined based
on the memories that are to be visible from the I/O subsystem, whether
behind a cache or a bridge.
The change is needed to allow interleaved memory controllers in the
system.
This patch tidies up a number of the bus DPRINTFs related to range
manipulation. In particular, it shifts the message about range changes
to the start of the member function, and also adds information about
when all ranges are received.
This patch makes the address mapper less stringent about checking the
before and after ranges, i.e. the original and remapped ranges. The
checks were not really necessary, and there are situations when the
previous checks were too strict.
This patch makes the start and end address private in a move to
prevent direct manipulation and matching of ranges based on these
fields. This is done so that a transition to ranges with interleaving
support is possible.
As a result of hiding the start and end, a number of member functions
are needed to perform the comparisons and manipulations that
previously took place directly on the members. An accessor function is
provided for the start address, and a function is added to test if an
address is within a range. As a result of the latter the != and ==
operator is also removed in favour of the member function. A member
function that returns a string representation is also created to allow
debug printing.
In general, this patch does not add any functionality, but it does
take us closer to a situation where interleaving (and more cleverness)
can be added under the bonnet without exposing it to the user. More on
that in a later patch.
This patch temporarily removes the joining of ranges when creating the
backing store, to reserve this functionality for the interleaved
ranges that are about to be introduced.
When creating the mmaps for the backing store, there is no point in
creating larger contigous chunks that what is necessary. The larger
chunks will only make life more difficult for the host.
Merging will be re-added later, but then only for interleaved ranges.
This patch adds support for reading input traces encoded using
protobuf according to what is done in the CommMonitor.
A follow-up patch adds a Python script that can be used to convert the
previously used ASCII traces to protobuf equivalents. The appropriate
regression input is updated as part of this patch.
The EIO tests depend on the EIO support from the "encumbered"
repository, which means that they are not normally built with
gem5. This causes all EIO related tests to fail, which is both
annoying and confusing. This patch addresses this by adding support
for skipping tests if certain conditions (e.g., the presence of a
SimObject) can not be met. It introduces the following Python
functions that can be called from within a test case:
* skip_test -- Skip a test and optionally print why the test was
skipped.
* has_sim_object -- Test if a SimObject exists.
* require_sim_object -- Test if a SimObject exists and skip, or
optionally fail, the test if not.
Additionally, this patch updates the EIO tests to check for the
presence of EioProcess.
This patch encapsulates the traffic generator input in a stream class
such that the parsing is not visible to the trace generator. The
change takes us one step closer to using protobuf-based input traces
for the trace replay.
The functionality of the current input stream is identical to what it
was, and the ASCII format remains the same for now.
This patch adds support for inputting protobuf messages through a
ProtoInputStream which hides the internal streams used by the
library. The stream is created based on the name of an input file and
optionally includes decompression using gzip.
The input stream will start by getting a magic number from the file,
and also verify that it matches with the expected value. Once opened,
messages can be read incrementally from the stream, returning
true/false until an error occurs or the end of the file is reached.
This patch adds packet tracing to the communication monitor using a
protobuf as the mechanism for creating the trace.
If no file is specified, then the tracing is disabled. If a file is
specified, then for every packet that is successfully sent, a protobuf
message is serialized to the file.
This patch adds support for outputting protobuf messages through a
ProtoOutputStream which hides the internal streams used by the
library. The stream is created based on the name of an output file and
optionally includes compression using gzip.
The output stream will start by putting a magic number in the file,
and then for every message that is serialized prepend the size such
that the stream can be written and read incrementally. At this point
this merely serves as a proof of concept.
This patch enables the use of protobuf input files in the build
process, thus allowing .proto files to be added to input. Each .proto
file is compiled using the protoc tool and the newly created C++
source is added to the list of sources.
The first location where the protobufs will be used is in the
capturing and replay of memory traces, involving the communication
monitor and the trace-generator state of the traffic generator. This
will follow in the next patch.
This patch does add a dependency on the availability of the BSD
licensed protobuf library (and headers), and the protobuf compiler,
protoc. These dependencies are checked in the SConstruct, similar to
e.g. swig. The user can override the use of protoc from the PATH by
specifying the PROTOC environment variable.
Although the dependency on libprotobuf and protoc might seem like a
big step, they add significant value to the project going
forward. Execution traces and other types of traces could easily be
added and parsers for C++ and Python are automatically generated. We
could also envision using protobufs for the checkpoints, description
of the traffic-generator behaviour etc. The sky is the limit. We could
also use the GzipOutputStream from the protobuf library instead of the
current GPL gzstream.
Currently, only the C++ source and header is generated. Going forward
we might want to add the Python output to support simple command-line
tools for displaying and editing the traces.
The PL111 model currently maintains a list of pre-allocated
DmaDoneEvents to prevent unnecessary heap allocations. This list
effectively works like a stack where the top element is the latest
scheduled event. When an event triggers, the top pointer is moved down
the stack. This obviously breaks since events usually retire from the
bottom (events don't necessarily have to retire in order), which
triggers the following assertion:
gem5.debug: build/ARM/dev/arm/pl111.cc:460: void Pl111::fillFifo(): \
Assertion `!dmaDoneEvent[dmaPendingNum-1].scheduled()' failed.
This changeset adds a vector listing the currently unused events. This
vector acts like a stack where the an element is popped off the stack
when a new event is needed an pushed on the stack when they trigger.
