Gabe Black
08f021aad0
X86: Implement the STARTUP IPI.
2009-04-19 02:56:03 -07:00
Gabe Black
d277feb925
X86: Implement the INIT IPI.
2009-04-19 02:53:00 -07:00
Gabe Black
a340b214cf
X86: Fix the halt microop.
2009-04-19 02:51:09 -07:00
Gabe Black
641513fe08
X86: Start implementing the interrupt command register in the local APIC.
2009-04-19 02:43:22 -07:00
Gabe Black
9549694ecd
X86: Make code that sends an interrupt from the IO APIC available for IPIs.
2009-04-19 02:42:19 -07:00
Gabe Black
06d25dcd26
X86: Automatically make the IO APIC in an N CPU system have id N+1.
2009-04-19 02:39:19 -07:00
Gabe Black
d10195b1a4
CPU: If the simple CPU is already idle, just return from suspendContext, don't assert.
2009-04-19 02:23:29 -07:00
Gabe Black
05b5861419
X86: Condense the startupCPU code.
2009-04-19 02:20:57 -07:00
Gabe Black
f668340f2c
X86: Set the local APIC ID to something meaningful.
2009-04-19 02:16:49 -07:00
Gabe Black
79a3a6aecb
X86: Don't pretend to be an AMD CPU any more. We're not good enough at it.
2009-04-19 02:06:51 -07:00
Korey Sewell
a25aa00522
o3-mips-regress: add hello word regression.
2009-04-18 10:42:29 -04:00
Korey Sewell
d8a34a9745
mips-tlb-fix: check for alignment faults.\nMIPS was never updated to use TLBS correcty in SE mode. The error was forwarding translations directly to pageTable. The TLB should check for alignment faults at bare minimum here but in the long run we should be using TLBs in SE mode for MIPS.
2009-04-18 10:42:29 -04:00
Korey Sewell
e501e1af54
mips-syscall: mark with correct flag. \nMIPS was using wrong serialization flag on syscall instructions allowing O3 to handle SE mode syscalls incorrectly and speculate on instructions after a syscall
2009-04-18 10:42:29 -04:00
Korey Sewell
5c1742b822
o3-delay-slot-bpred: fix decode stage handling of uncdtl. branches.\n decode stage was not setting the predicted PC correctly or passing that information back to fetch correctly
2009-04-18 10:42:29 -04:00
Korey Sewell
cc9e834e93
mips-shadowsets: fix calcuations. \n Remove Shadowsets from Int & Arch. Reg Calculations
2009-04-18 10:42:28 -04:00
Steve Reinhardt
14808ecac9
o3, inorder: fix FS bug due to initializing ThreadState to Halted.
...
For some reason o3 FS init() only called initCPU if the thread state
was Suspended, which was no longer the case. There's no apparent
reason to check, so I whacked the test completely rather than
changing the check to Halted.
The inorder init() was also updated to be symmetric, though the
previous code was just a fancy no-op.
2009-04-17 16:54:58 -07:00
Steve Reinhardt
b146131d18
o3: handle fetch with no active threads correctly.
...
This situation can arise now on the first fetch cycle after
the last active thread is halted. It seems easy enough to
deal with when it happens rather than trying to avoid it.
2009-04-15 23:12:00 -07:00
Steve Reinhardt
bb974d5a47
o3: fix {read,set}ArchFloatReg* functions.
...
Register indices were not being calculated properly.
2009-04-15 23:10:43 -07:00
Steve Reinhardt
7617dcf736
ThreadState: initialize status to Halted in constructor.
...
This provides a common initial status for all threads independent
of CPU model (unlike the prior situation where CPUs initialized
threads to inconsistent states).
This mostly matters for SE mode; in FS mode, ISA-specific startupCPU()
methods generally handle boot-time initialization of thread contexts
(since the right thing to do is ISA-dependent).
2009-04-15 13:18:24 -07:00
Steve Reinhardt
48d4ca522a
Update stats after elimination of Unallocated state.
...
Somehow ending threads with halt() instead of deallocate()
reduces the squash count on o3 by 1 (and a few other
similarly trivial changes).
2009-04-15 13:13:58 -07:00
Steve Reinhardt
8882dc1283
Get rid of the Unallocated thread context state.
...
Basically merge it in with Halted.
Also had to get rid of a few other functions that
called ThreadContext::deallocate(), including:
- InOrderCPU's setThreadRescheduleCondition.
- ThreadContext::exit(). This function was there to avoid terminating
simulation when one thread out of a multi-thread workload exits, but we
need to find a better (non-cpu-centric) way.
2009-04-15 13:13:47 -07:00
Steve Reinhardt
9b66e82897
configs: Allow M5_CPU2000 env var to set CPU2K binary path.
...
It would be nice to have a more comprehensive mechanism
but this is a big improvement over manually editing the script.
2009-04-15 12:52:31 -07:00
Gabe Black
5c79191603
X86: Fix minor bug in the page table walker from TLB shuffling.
2009-04-13 04:14:15 -07:00
Nathan Binkert
c87c9950df
stats: disallow duplicate statistic names.
2009-04-08 22:22:50 -07:00
Nathan Binkert
18a30524d6
alpha: get rid of all turbolaser remnants
2009-04-08 22:22:49 -07:00
Nathan Binkert
374ba9bae3
tests: update tests for TLB unification
2009-04-08 22:21:30 -07:00
Nathan Binkert
e0de2c3443
tlb: More fixing of unified TLB
2009-04-08 22:21:27 -07:00
Gabe Black
7b5a96f06b
tlb: Don't separate the TLB classes into an instruction TLB and a data TLB
2009-04-08 22:21:27 -07:00
Nathan Binkert
08043c777f
style: fix style hook for some newer versions of mercurial.
2009-04-08 22:21:25 -07:00
Gabe Black
d080581db1
Merge ARM into the head. ARM will compile but may not actually work.
2009-04-06 10:19:36 -07:00
Stephen Hines
7a7c4c5fca
arm: add ARM support to M5
2009-04-05 18:53:15 -07:00
Ali Saidi
639cb0a42d
CPA: Fix a typo that managed to sneak in.
2009-03-25 20:06:54 -04:00
Nathan Binkert
a102f84540
includes: add ext to the includes path.
...
move dnet to the correct place so that we use this
--HG--
rename : ext/dnet/dnet/addr.h => ext/dnet/addr.h
rename : ext/dnet/dnet/arp.h => ext/dnet/arp.h
rename : ext/dnet/dnet/blob.h => ext/dnet/blob.h
rename : ext/dnet/dnet/eth.h => ext/dnet/eth.h
rename : ext/dnet/dnet/fw.h => ext/dnet/fw.h
rename : ext/dnet/dnet/icmp.h => ext/dnet/icmp.h
rename : ext/dnet/dnet/intf.h => ext/dnet/intf.h
rename : ext/dnet/dnet/ip.h => ext/dnet/ip.h
rename : ext/dnet/dnet/ip6.h => ext/dnet/ip6.h
rename : ext/dnet/dnet/os.h => ext/dnet/os.h
rename : ext/dnet/dnet/rand.h => ext/dnet/rand.h
rename : ext/dnet/dnet/route.h => ext/dnet/route.h
rename : ext/dnet/dnet/tcp.h => ext/dnet/tcp.h
rename : ext/dnet/dnet/udp.h => ext/dnet/udp.h
2009-03-17 12:49:03 -07:00
Nathan Binkert
f3621f11d5
ply: put the absolute path to ply in the environment, not a relative one
2009-03-17 12:45:41 -07:00
Nathan Binkert
4eea8acaf2
stats: fix compiler error
2009-03-16 15:16:58 -07:00
Steve Reinhardt
15f0e44060
Very minor regression stats updates due top previous changeset.
...
Setting dirty bit on swaps added a handful of writebacks in a
few of the longer-running SPARC_SE benchmarks.
2009-03-16 11:01:23 -04:00
Steve Reinhardt
758bfe4eb5
cache: set dirty bit on swaps (oops!)
2009-03-11 23:05:26 -07:00
Steve Reinhardt
61ff48a1f8
cpu: fix minor endian issue with trace output
...
(no functional change)
2009-03-11 23:05:24 -07:00
Steve Reinhardt
17cb191c98
tests: use env.Execute instead of Execute to pick up env vars.
2009-03-11 10:54:42 -07:00
Steve Reinhardt
a94c68228a
prefetch: don't panic on requests w/o contextID (e.g., writebacks).
2009-03-10 17:37:15 -07:00
Nathan Binkert
ac64586a99
build: fix compiler warnings in g++ 3.4
2009-03-07 21:34:50 -08:00
Steve Reinhardt
4c902714f7
Minor tweak to regression exit status message.
2009-03-07 17:24:13 -08:00
Steve Reinhardt
4f1855484c
Fix up regression execution to better handle tests that end abnormally.
...
E.g., mark aborts due to assertion failures as failed tests,
but those that get killed by the user as needing to be rerun, etc.
2009-03-07 16:58:51 -08:00
Nathan Binkert
5cf0605766
tests: update tests because of changes in stat names and in the stats package
2009-03-07 14:30:55 -08:00
Nathan Binkert
ac7bda0212
stats: fix duplicate statistics names.
...
This generally requires providing a more meaningful name() function for a
class.
2009-03-07 14:30:54 -08:00
Nathan Binkert
fcaf1b74b0
stats: cleanup text output stuff and fix mysql output
2009-03-07 14:30:53 -08:00
Nathan Binkert
be2d74a25a
scons: fix the library path stuff
2009-03-07 14:30:52 -08:00
Nathan Binkert
66a85b54e2
build: fix errors for compilers other than g++ 4.3
2009-03-07 14:30:52 -08:00
Nathan Binkert
6f787e3d36
stats: create an enable phase, and a prepare phase.
...
Enable more or less takes the place of check, but also allows stats to
do some other configuration. Prepare moves all of the code that readies
a stat for dumping into a separate function in preparation for supporting
serialization of certain pieces of statistics data.
While we're at it, clean up the visitor code and some of the python code.
2009-03-05 19:09:53 -08:00
Nathan Binkert
9f45fbaaa6
stats: clean up how templates are used on the data side.
...
This basically works by taking advantage of the curiously recurring template
pattern in an intelligent way so as to reduce the number of lines of code
and hopefully make things a little bit clearer.
2009-03-05 19:09:53 -08:00
