gem5/src/mem/bus.hh

274 lines
9.1 KiB
C++
Raw Normal View History

/*
* Copyright (c) 2002-2005 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Ron Dreslinski
* Ali Saidi
*/
/**
* @file
* Declaration of a bus object.
*/
#ifndef __MEM_BUS_HH__
#define __MEM_BUS_HH__
#include <string>
#include <list>
#include <inttypes.h>
#include "base/range.hh"
#include "base/range_map.hh"
#include "mem/mem_object.hh"
#include "mem/packet.hh"
#include "mem/port.hh"
#include "mem/request.hh"
#include "sim/eventq.hh"
class Bus : public MemObject
{
/** a globally unique id for this bus. */
int busId;
/** the clock speed for the bus */
int clock;
/** the width of the bus in bytes */
int width;
/** the next tick at which the bus will be idle */
Tick tickNextIdle;
Event * drainEvent;
static const int defaultId = -3; //Make it unique from Broadcast
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
struct DevMap {
int portId;
Range<Addr> range;
};
range_map<Addr, int> portMap;
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
AddrRangeList defaultRange;
std::vector<DevMap> portSnoopList;
/** Function called by the port when the bus is recieving a Timing
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
transaction.*/
bool recvTiming(PacketPtr pkt);
/** Function called by the port when the bus is recieving a Atomic
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
transaction.*/
Tick recvAtomic(PacketPtr pkt);
/** Function called by the port when the bus is recieving a Functional
transaction.*/
void recvFunctional(PacketPtr pkt);
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
/** Timing function called by port when it is once again able to process
* requests. */
void recvRetry(int id);
/** Function called by the port when the bus is recieving a status change.*/
void recvStatusChange(Port::Status status, int id);
/** Find which port connected to this bus (if any) should be given a packet
* with this address.
* @param addr Address to find port for.
* @param id Id of the port this packet was received from (to prevent
* loops)
* @return pointer to port that the packet should be sent out of.
*/
Split SimpleCPU into two different models, AtomicSimpleCPU and TimingSimpleCPU, which use atomic and timing memory accesses respectively. Common code is factored into the BaseSimpleCPU class. AtomicSimpleCPU includes an option (simulate_stalls) to add delays based on the estimated latency reported by the atomic accesses. Plain old "SimpleCPU" is gone; I have not updated all the config files (just test/test.py). Also fixes to get timing accesses working in new memory model and to get split-phase memory instruction definitions working with new memory model as well. arch/alpha/isa/main.isa: Need to include packet_impl.h for functions that use Packet objects. arch/alpha/isa/mem.isa: Change completeAcc() methods to take Packet object pointers. Also split out StoreCond template for completeAcc(), since that's the only one that needs write_result and we get an unused variable warning if we always have it in there. build/SConstruct: Update list of recognized CPU model names. configs/test/test.py: Change SimpleCPU to AtomicSimpleCPU. cpu/SConscript: Define sources for new CPU models. Add split memory access methods to CPU model signatures. cpu/cpu_models.py: cpu/static_inst.hh: Define new CPU models. cpu/simple/base.cc: cpu/simple/base.hh: Factor out pieces specific to Atomic or Timing models. mem/bus.cc: Bus needs to be able to route timing packets based on explicit dest so responses can get back to requester. Set dest to Packet::Broadcast to indicate that dest should be derived from address. Also set packet src field based on port from which packet is sent. mem/bus.hh: Set packet src field based on port from which packet is sent. mem/packet.hh: Define Broadcast destination address to indicate that packet should be routed based on address. mem/physical.cc: Set packet dest on response so packet is routed back to requester properly. mem/port.cc: Flag blob packets as Broadcast. python/m5/objects/PhysicalMemory.py: Change default latency to be 1 cycle. --HG-- rename : cpu/simple/cpu.cc => cpu/simple/base.cc rename : cpu/simple/cpu.hh => cpu/simple/base.hh extra : convert_revision : e9646af6406a20c8c605087936dc4683375c2132
2006-05-16 23:36:50 +02:00
Port *findPort(Addr addr, int id);
/** Find all ports with a matching snoop range, except src port. Keep in mind
* that the ranges shouldn't overlap or you will get a double snoop to the same
* interface.and the cache will assert out.
* @param addr Address to find snoop prts for.
* @param id Id of the src port of the request to avoid calling snoop on src
* @return vector of IDs to snoop on
*/
std::vector<int> findSnoopPorts(Addr addr, int id);
/** Snoop all relevant ports atomicly. */
Tick atomicSnoop(PacketPtr pkt, Port* responder);
/** Snoop all relevant ports functionally. */
void functionalSnoop(PacketPtr pkt, Port *responder);
/** Call snoop on caches, be sure to set SNOOP_COMMIT bit if you want
* the snoop to happen
* @return True if succeds.
*/
bool timingSnoop(PacketPtr pkt, Port *responder);
/** Process address range request.
* @param resp addresses that we can respond to
* @param snoop addresses that we would like to snoop
* @param id ide of the busport that made the request.
*/
void addressRanges(AddrRangeList &resp, AddrRangeList &snoop, int id);
/** Occupy the bus with transmitting the packet pkt */
void occupyBus(PacketPtr pkt);
/** Declaration of the buses port type, one will be instantiated for each
of the interfaces connecting to the bus. */
class BusPort : public Port
{
bool _onRetryList;
/** A pointer to the bus to which this port belongs. */
Bus *bus;
/** A id to keep track of the intercafe ID this port is connected to. */
int id;
public:
/** Constructor for the BusPort.*/
BusPort(const std::string &_name, Bus *_bus, int _id)
: Port(_name, _bus), _onRetryList(false), bus(_bus), id(_id)
{ }
bool onRetryList()
{ return _onRetryList; }
void onRetryList(bool newVal)
{ _onRetryList = newVal; }
protected:
/** When reciving a timing request from the peer port (at id),
pass it to the bus. */
virtual bool recvTiming(PacketPtr pkt)
{ pkt->setSrc(id); return bus->recvTiming(pkt); }
/** When reciving a Atomic requestfrom the peer port (at id),
pass it to the bus. */
virtual Tick recvAtomic(PacketPtr pkt)
{ pkt->setSrc(id); return bus->recvAtomic(pkt); }
/** When reciving a Functional requestfrom the peer port (at id),
pass it to the bus. */
virtual void recvFunctional(PacketPtr pkt)
{ pkt->setSrc(id); bus->recvFunctional(pkt); }
/** When reciving a status changefrom the peer port (at id),
pass it to the bus. */
virtual void recvStatusChange(Status status)
{ bus->recvStatusChange(status, id); }
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
/** When reciving a retry from the peer port (at id),
pass it to the bus. */
virtual void recvRetry()
{ bus->recvRetry(id); }
// This should return all the 'owned' addresses that are
// downstream from this bus, yes? That is, the union of all
// the 'owned' address ranges of all the other interfaces on
// this bus...
Split SimpleCPU into two different models, AtomicSimpleCPU and TimingSimpleCPU, which use atomic and timing memory accesses respectively. Common code is factored into the BaseSimpleCPU class. AtomicSimpleCPU includes an option (simulate_stalls) to add delays based on the estimated latency reported by the atomic accesses. Plain old "SimpleCPU" is gone; I have not updated all the config files (just test/test.py). Also fixes to get timing accesses working in new memory model and to get split-phase memory instruction definitions working with new memory model as well. arch/alpha/isa/main.isa: Need to include packet_impl.h for functions that use Packet objects. arch/alpha/isa/mem.isa: Change completeAcc() methods to take Packet object pointers. Also split out StoreCond template for completeAcc(), since that's the only one that needs write_result and we get an unused variable warning if we always have it in there. build/SConstruct: Update list of recognized CPU model names. configs/test/test.py: Change SimpleCPU to AtomicSimpleCPU. cpu/SConscript: Define sources for new CPU models. Add split memory access methods to CPU model signatures. cpu/cpu_models.py: cpu/static_inst.hh: Define new CPU models. cpu/simple/base.cc: cpu/simple/base.hh: Factor out pieces specific to Atomic or Timing models. mem/bus.cc: Bus needs to be able to route timing packets based on explicit dest so responses can get back to requester. Set dest to Packet::Broadcast to indicate that dest should be derived from address. Also set packet src field based on port from which packet is sent. mem/bus.hh: Set packet src field based on port from which packet is sent. mem/packet.hh: Define Broadcast destination address to indicate that packet should be routed based on address. mem/physical.cc: Set packet dest on response so packet is routed back to requester properly. mem/port.cc: Flag blob packets as Broadcast. python/m5/objects/PhysicalMemory.py: Change default latency to be 1 cycle. --HG-- rename : cpu/simple/cpu.cc => cpu/simple/base.cc rename : cpu/simple/cpu.hh => cpu/simple/base.hh extra : convert_revision : e9646af6406a20c8c605087936dc4683375c2132
2006-05-16 23:36:50 +02:00
virtual void getDeviceAddressRanges(AddrRangeList &resp,
AddrRangeList &snoop)
{ bus->addressRanges(resp, snoop, id); }
// Hack to make translating port work without changes
virtual int deviceBlockSize() { return 32; }
};
class BusFreeEvent : public Event
{
Bus * bus;
public:
BusFreeEvent(Bus * _bus);
void process();
const char *description();
};
BusFreeEvent busIdle;
bool inRetry;
/** An array of pointers to the peer port interfaces
connected to this bus.*/
std::vector<BusPort*> interfaces;
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
/** An array of pointers to ports that retry should be called on because the
* original send failed for whatever reason.*/
std::list<BusPort*> retryList;
Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573
2006-05-31 00:57:42 +02:00
void addToRetryList(BusPort * port)
{
if (!inRetry) {
// The device wasn't retrying a packet, or wasn't at an appropriate
// time.
assert(!port->onRetryList());
port->onRetryList(true);
retryList.push_back(port);
} else {
if (port->onRetryList()) {
// The device was retrying a packet. It didn't work, so we'll leave
// it at the head of the retry list.
assert(port == retryList.front());
inRetry = false;
}
else {
port->onRetryList(true);
retryList.push_back(port);
}
}
}
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
/** Port that handles requests that don't match any of the interfaces.*/
BusPort *defaultPort;
Add default responder to bus Update configuration for new default responder on bus Update to devices to handle their own pci config space without pciconfigall Remove most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for Remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt Remove pciconfigspace from pci devices, and py files Add calcConfigAddr that returns address for config space based on bus/dev/function + offset configs/test/fs.py: Update configuration for new default responder on bus src/dev/ide_ctrl.cc: src/dev/ide_ctrl.hh: src/dev/ns_gige.cc: src/dev/ns_gige.hh: src/dev/pcidev.cc: src/dev/pcidev.hh: Update to handle it's own pci config space without pciconfigall src/dev/io_device.cc: src/dev/io_device.hh: change naming for pio port break out recvTiming into two functions to reuse code src/dev/pciconfigall.cc: src/dev/pciconfigall.hh: removing most of pciconfigall, it now is a dumbdevice which gets it's address based on the bus it's supposed to respond for src/dev/pcireg.h: add a max size for PCI config space (per PCI spec) src/dev/platform.cc: src/dev/platform.hh: remove need for pci config space from platform, add registerPciDevice function to prevent more than one device from having same bus:dev:func and interrupt src/dev/sinic.cc: remove pciconfigspace as it's no longer a needed parameter src/dev/tsunami.cc: src/dev/tsunami.hh: src/dev/tsunami_pchip.cc: src/dev/tsunami_pchip.hh: add calcConfigAddr that returns address for config space based on bus/dev/function + offset (per PCI spec) src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: add idea of default responder to bus src/python/m5/objects/Pci.py: add config port for pci devices add latency, bus and size parameters for pci config all (min is 8MB, max is 256MB see pci spec) --HG-- extra : convert_revision : 99db43b0a3a077f86611d6eaff6664a3885da7c9
2006-07-06 20:41:01 +02:00
/** Has the user specified their own default responder? */
bool responderSet;
public:
/** A function used to return the port associated with this bus object. */
Move SimObject creation and Port connection loops into Python. Add Port and VectorPort objects and support for specifying port connections via assignment. The whole C++ ConfigNode hierarchy is gone now, as are C++ Connector objects. configs/test/fs.py: configs/test/test.py: Rewrite for new port connector syntax. src/SConscript: Remove unneeded files: - mem/connector.* - sim/config* src/dev/io_device.hh: src/mem/bridge.cc: src/mem/bridge.hh: src/mem/bus.cc: src/mem/bus.hh: src/mem/mem_object.hh: src/mem/physical.cc: src/mem/physical.hh: Allow getPort() to take an optional index to support vector ports (eventually). src/python/m5/__init__.py: Move SimObject construction and port connection operations into Python (with C++ calls). src/python/m5/config.py: Move SimObject construction and port connection operations into Python (with C++ calls). Add support for declaring and connecting MemObject ports in Python. src/python/m5/objects/Bus.py: src/python/m5/objects/PhysicalMemory.py: Add port declaration. src/sim/builder.cc: src/sim/builder.hh: src/sim/serialize.cc: src/sim/serialize.hh: ConfigNodes are gone; builder just gets the name of a .ini file section now. src/sim/main.cc: Move SimObject construction and port connection operations into Python (with C++ calls). Split remaining initialization operations into two parts, loadIniFile() and finalInit(). src/sim/param.cc: src/sim/param.hh: SimObject resolution done globally in Python now (not via ConfigNode hierarchy). src/sim/sim_object.cc: Remove unneeded #include. --HG-- extra : convert_revision : 2fa4001eaaec0c9a4231ef6e854f8e156d930dfe
2006-06-14 05:19:28 +02:00
virtual Port *getPort(const std::string &if_name, int idx = -1);
virtual void init();
unsigned int drain(Event *de);
Bus(const std::string &n, int bus_id, int _clock, int _width,
bool responder_set)
: MemObject(n), busId(bus_id), clock(_clock), width(_width),
tickNextIdle(0), drainEvent(NULL), busIdle(this), inRetry(false),
defaultPort(NULL), responderSet(responder_set)
{
//Both the width and clock period must be positive
if (width <= 0)
fatal("Bus width must be positive\n");
if (clock <= 0)
fatal("Bus clock period must be positive\n");
}
};
#endif //__MEM_BUS_HH__