code
arch/alpha/alpha_memory.cc:
Fixed unaligned trap faults
arch/alpha/ev5.cc:
little more verbose faulting information
kern/linux/linux_system.cc:
more descriptive errors, and the correct offsets from symbols
sim/system.cc:
load local pal symbols
--HG--
extra : convert_revision : 0c81badf77321d5e1a060dcae2d42204e5a1fc84
arch/alpha/isa_desc:
whitespace fix.
cpu/simple_cpu/simple_cpu.cc:
Add support to make sure we don't get alignment faults in copies. Warn if we go over an 8k page boundary.
--HG--
extra : convert_revision : 98b38da86a66215d80ea9eb6e6f1f68ee573cb57
arch/alpha/ev5.cc:
set the mode explictly rather than having a bool user/notuser
cpu/simple_cpu/simple_cpu.hh:
there is no class Kernel
kern/kernel_stats.cc:
use cpu_mode_num
kern/kernel_stats.hh:
add interrupt mode and use cpu_mode_num rather than constant
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
kern/system_events.cc:
kern/system_events.hh:
add events to change the mode to/from interrupt
sim/system.cc:
sim/system.hh:
add a pal symbol table
--HG--
extra : convert_revision : 9d30e826b72122062a5ea12d094f94760e75c66a
single place so it's easier to work with.
- Add support for binning kernel/user/idle time separately from
lisa's binning stuff, but make the two compatible.
- KernelStats used to directly implement the pImpl idiom, but
it makes more sense to just remove the level of indirection and
make the exec context have a pointer to the stats.
- Factor common code out of LinuxSystem and Tru64System and put
it into the System base class. While doing that, make all
constructors take a pointer to a parameter struct instead of
naming the parameters individually to make it much easier to add
parameters to these classes.
SConscript:
Move the function tracking and binning stuff around.
arch/alpha/ev5.cc:
kernelStats is now a pointer
arch/alpha/pseudo_inst.cc:
kernelStats is now a pointer
the parameters to the system have been moved into their own
struct
base/trace.hh:
provide a little functor class for wrapping a string that
can allow you to define name() in any scope very simply
for use with DPRINTF
cpu/base_cpu.cc:
New order of arguments for consistency.
cpu/exec_context.cc:
kernelStats no longer has the level of indirection in it,
execContext has the indirection now. so, kernelStats is a pointer.
We also need a pointer to the kernelBinning stuff from the system
and we need to figure out if we want to do binning or not.
Move a whole bunch of code into kern_binning.cc so it's all
in the same place.
cpu/exec_context.hh:
We want pointers to the kernel binning/stats stuff and we'll
have the exec_context and system have the level of indirection
instead of having the extra layer in the kernel stats class.
cpu/simple_cpu/simple_cpu.cc:
call through the exec context to do the special binning
stuff.
kern/kernel_stats.cc:
kern/kernel_stats.hh:
Re-organize the stats stuff and remove the level of indirection
(that was there to simplify building) and move the binning stuff
into its own class/file.
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
kern/tru64/tru64_system.cc:
kern/tru64/tru64_system.hh:
sim/system.cc:
sim/system.hh:
move lots of common system code into the base system class so
that it can be shared between linux, tru64, and whatever else
we decide to support in the future.
Make the constructor take a pointer to a parameter struct so that
it is easier to pass parameters to the parent.
kern/system_events.cc:
move the majority of the binning code into the Kernel::Binning class
in the kern_binning file
kern/system_events.hh:
FnEvents only need to know the bin
create the Idle start event to find the PCBB of the idle
process when it starts.
kern/tru64/tru64_events.cc:
memCtrl -> memctrl
sim/process.cc:
sim/process.hh:
re-order args for consistency
--HG--
extra : convert_revision : 86cb39738c41fcd680f2aad125c9dde000227b2b
a p4 memory/cpu config
arch/alpha/alpha_memory.cc:
Added code to fault on an unaligned access
arch/alpha/isa_desc:
arch/alpha/pseudo_inst.cc:
arch/alpha/pseudo_inst.hh:
Added m5debug break and m5switchcpu (the latter doesn't work)
--HG--
extra : convert_revision : 409e73adb151600a4fea49f35bf6f503f66fa916
arch/alpha/ev5.hh:
Added max address PAL code can be at
arch/alpha/vtophys.cc:
Check max address pal can be at so we don't do the wrong conversion
if gdb asks for an unaligned access.
--HG--
extra : convert_revision : b44f6a8fcd8582337a7d4033f28137c7e718a6a8
a realworld file.
arch/alpha/isa_desc:
arch/alpha/pseudo_inst.hh:
implement the readfile pseudo instruction that will read a
chunk of a realworld file.
arch/alpha/pseudo_inst.cc:
implement the readfile pseudo instruction that will read a
chunk of a realworld file. The filename is a per system
parameter and comes from the system itself.
kern/linux/linux_system.cc:
sim/system.hh:
Create a per-system readfile parameter for use by the readfile
pseudo instruction. That way each system can get its own file.
--HG--
extra : convert_revision : 941b3a3e20702a6252b219ca66a6d90da2944c50
from the simulator into the simulatee
kern/tru64/dump_mbuf.cc:
rename CopyData -> CopyOut
--HG--
extra : convert_revision : e3ef27a5762dfc495dcb84a372470464c27557d2
arch/alpha/ev5.cc:
cpu/simple_cpu/simple_cpu.cc:
update for new event interface
base/stats/events.cc:
implement the ignore event function which matches sim objects from which
to ignore events.
Make insert event like insert data and make it able to insert many
events in a single transaction with the database.
base/stats/events.hh:
Make it possible to ignore events
sim/sim_object.cc:
make recordEvent a member function of SimObject to implement
the ignore function easily
sim/sim_object.hh:
implement the ignore event stuff in the sim object. This is a
bit of a hack, but an easy place to put it.
--HG--
extra : convert_revision : ba3f25a14ad03662c53fb35514860d69be8cd4f0
arch/alpha/alpha_memory.cc:
arch/alpha/ev5.hh:
Ifdefed TLASER code
arch/alpha/vtophys.cc:
added back some code andrew removed and couldn't remember why.
--HG--
extra : convert_revision : f00d255f7a8a7bdb6e74f061dd014188e3b39e73
Mostly a matter of keeping prefetches to invalid addrs
from messing up VM IPRs. Also discovered that wh64s were
not being treated as prefetches, when they really should be
(for the most part, anyway).
arch/alpha/alpha_memory.cc:
arch/alpha/alpha_memory.hh:
- Get rid of intrlock flag for locking VM fault regs (a la EV5);
instead, just don't update regs on VPTE loads (a la EV6).
- Add NO_FAULT MemReq flag to indicate references that should not
cause page faults (i.e., prefetches).
arch/alpha/ev5.cc:
- Get rid of intrlock flag for locking VM fault regs (a la EV5);
instead, just don't update regs on VPTE loads (a la EV6).
- Add Fault trace flag.
arch/alpha/isa_desc:
- Add NO_FAULT MemReq flag to indicate references that should not
cause page faults (i.e., prefetches).
- Mark wh64 as a "data prefetch" instruction so it gets controlled
properly by the FullCPU data prefetch control switch.
- Align wh64 EA in decoder so issue stage doesn't need to worry about it.
arch/alpha/isa_traits.hh:
- Get rid of intrlock flag for locking VM fault regs (a la EV5);
instead, just don't update regs on VPTE loads (a la EV6).
base/traceflags.py:
- Add Fault trace flag.
cpu/simple_cpu/simple_cpu.hh:
- Pass MemReq flags to writeHint() operation.
cpu/static_inst.hh:
Update comment re: prefetches.
--HG--
extra : convert_revision : 62e466b0f4c0ff9961796270fa2e371ec24bcbb6
and started cleaning up config files.
arch/alpha/isa_desc:
Made implementation of cttz and ctlz more compact
base/remote_gdb.cc:
Added comment about PALcode debugger accesses
dev/baddev.cc:
dev/baddev.hh:
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
dev/tsunami_uart.cc:
dev/tsunami_uart.hh:
Cleaned up includes and changed device from FunctionalMemory to
PioDevice for detailed boot
dev/ns_gige.cc:
The ethernet dev uses two BARs, and the first bars size was being set
incorrectly.
dev/tsunamireg.h:
I don't know why we were using the superpage as the PCI memory addr.
Changed and works correctly with detailed boot.
--HG--
extra : convert_revision : b535e76612cb90b544305dc1aa8c5e0e774564bd
Got rid of two inconsistent sets of strings that corresponded
to this enum, and replaced with a single set that clearly
matches the enum names.
arch/alpha/isa_desc:
arch/isa_parser.py:
cpu/full_cpu/op_class.hh:
Renamed OpClass enum members.
--HG--
extra : convert_revision : bf596f7568a20b2e77c07ac349f253135141aef4
base/stats/mysql.hh:
Rename of Statsistics namespace to stats... merge from head
--HG--
extra : convert_revision : a5a7f6268b35e75fba1b1800a74fcd6dbd09d974
arch/alpha/ev5.cc:
Updated to support new forms of setIntReg and setFloatRegDouble. Will need to be cleaned up in the future.
arch/isa_parser.py:
Added in FastCPU model.
--HG--
extra : convert_revision : 384a27efcb50729ea6c3cc11653f395c300e48db
arch/alpha/ev5.cc:
Added templatized processInterrupts() function that can be used by all of the CPU models.
arch/alpha/isa_desc:
Merged in changes to remove CPU dependence.
arch/isa_parser.py:
Merged in changes.
cpu/static_inst.hh:
Includes FastCPU execute methods.
--HG--
extra : convert_revision : fcaa1dca35a9b316c73982bec8680df564f50bd8
Also various changes to make the CPU model less ISA dependent, which includes moving the code that checks for interrupts up to the ISA level, moving code that zeroes the zero registers up to the ISA level, and removing opcode and ra from the regfile.
arch/alpha/alpha_memory.cc:
The regfile has been changed so it no longer has the opcode and ra. Instead the xc holds the actual instruction, and from there the opcode and ra can be obtained with OPCODE() and RA().
arch/alpha/ev5.cc:
Moved code that once existed within simpleCPU to ev5, and templatized it.
This way the CPU models can call processInterrupts and the ISA specific interrupt handling is left to the ISA's code.
Also moved ISA specific zero registers from simpleCPU to here.
arch/alpha/ev5.hh:
Added macros for obtaining the opcode and ra from the instruction itself, as there is no longer opcode or ra in the regfile.
arch/alpha/isa_desc:
Added in declarations for the FastCPU model.
arch/alpha/isa_traits.hh:
Removed opcode and ra from the regfile. The xc now holds the actual instruction, and the opcode and ra can be obtained through it.
Also added the declaration for the templated zeroRegisters() function, which will set the zero registers to 0.
arch/isa_parser.py:
Added in FastCPUExecContext so it will generate code for the FastCPU model as well.
cpu/exec_context.cc:
Added in a more generic trap function so "ev5_trap" doesn't need to be called. It currently still calls the old method, with plans for making this ISA dependent in the future.
cpu/exec_context.hh:
Exec context now has the instruction within it. Also added methods for exec context to read an instruction from memory, return the current instruction, and set the instruction if needed.
Also has declaration for more generic trap() function.
cpu/simple_cpu/simple_cpu.cc:
Removed references to opcode and ra, and instead sets the xc's instruction with the fetched instruction.
cpu/static_inst.hh:
Added declaration for execute() using FastCPUExecContext.
--HG--
extra : convert_revision : 0441ea3700ac50b733e485395d4dd4ac83666f92
arch/alpha/ev5.cc:
Add an event for faults
cpu/simple_cpu/simple_cpu.cc:
add events for uncached reads/writes
--HG--
extra : convert_revision : 747bdf12761e2de6ebbf54fecc9e0b71915b3a02
if Tru64 is to continue to be supported on Turbolaser) and fixed
translation of physical addresses by clearing PA<42:35> when the real
uncachable bit (43) is set
arch/alpha/ev5.hh:
Change to support 256 ASNs and seperate VA_SPACE checks for EV5 and EV6
also add support proper translation of uncacheable physical addresses
dev/ide_ctrl.cc:
Fix to work with real address translation
--HG--
extra : convert_revision : aa3d1c284b8271d4763a8da2509c91bbcf83189a
with an IsNonSpeculative flag.
No effect on results of non-full-system or SimpleCPU.
Very small impact on full-system FullCPU runs since old wrong-path
call_pal insts used to change the PC, where now they're treated
as no-ops.
arch/alpha/isa_desc:
Get rid of xc->misspeculating() checks, use IsNonSpeculative flag instead.
cpu/static_inst.hh:
Add IsNonSpeculative flag and isNonSpeculative() method to test it.
--HG--
extra : convert_revision : 7ec536bfc28b905c429c09eb920ed73ef2beeeba
out CPU model. ISA description now generates multiple
output source files to (in theory) reduce compilation time.
arch/alpha/isa_desc:
Update for parser changes. Move most constructors
out of class declarations (which are now in decoder.hh)
and into decoder.cc. Move all execute() methods into
exec output.
arch/isa_parser.py:
Significant changes to make ISA description completely
independent of CPU model, and isolate model-dependent parts
of parser into one little class (CpuModel). Also split up code
output into multiple files (a header, a main source file, and
per-cpu execute() method files).
Noticeable changes to language as a result. See updated Doxygen
documentation.
cpu/simple_cpu/simple_cpu.hh:
SimpleCPUExecContext typedef no longer needed.
Add forward declaration of Process.
cpu/static_inst.hh:
SimpleCPUExecContext and FullCPUExecContext typedefs no longer needed.
Make eaCompInst() and memAccInst() return const refs.
--HG--
extra : convert_revision : 71471f267804fafd0a881bac7445677e76334daf
a pointer to an object that lives inside simulated memory.
Useful for doing a bit of analysis of what's going on in
the running kernel.
--HG--
extra : convert_revision : d78089cce5ec4334483a710ba512eaf18d9b0319
arch/alpha/isa_desc:
remove the annotation junk
Move some code to AlphaPseudo where it belongs
arch/alpha/pseudo_inst.cc:
arch/alpha/pseudo_inst.hh:
remove the annotation junk
add pseudo instruction code that was previously misplaced
--HG--
extra : convert_revision : 97db8402aa34e0bdf044b138c52331fc9e714986
switches. (Makes other uncommitted code easier to merge.)
arch/alpha/ev5.cc:
pass the address of both the old an new pcbb on context
switches
--HG--
extra : convert_revision : bff8c8d1b532ad5f9af6270169bbfb1b5c05256a
arch/alpha/alpha_memory.cc:
change to the main m5 tree convention for naming
base/traceflags.py:
add ide and pciconfigall traceflags
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
kill some old binning styled stuff
--HG--
extra : convert_revision : 0558878906817975a714b1c7c08f9ee405468535
(Still not perfect though.)
arch/alpha/isa_desc:
Do a better job of factoring out CPU model. (Still not perfect though.)
Pull execute() methods out of class declarations into separate section
of file, allowing (1) easier replication for different CPU models and
(2) a path to putting them all in a separate file. Force all instruction
execution context into a single model-dependent class (SimpleCPU itself
for SimpleCPU, DynInst for FullCPU).
arch/isa_parser.py:
Do a better job of factoring out CPU model. (Still not perfect though.)
Pull execute() methods out of class declarations into separate section
of file, allowing (1) easier replication for different CPU models and
(2) a path to putting them all in a separate file.
Also restructure top level to allow parser to run under interactive
interpreter session for easier debugging.
cpu/exec_context.hh:
Add a few new methods to clean up isa_desc.
cpu/simple_cpu/simple_cpu.cc:
cpu/static_inst.hh:
StaticInst::execute no longer takes a CPU and an ExecContext,
just a unified FooCPUExecContext.
cpu/simple_cpu/simple_cpu.hh:
Add methods to redirect calls to ExecContext so SimpleCPU
can act as sole instruction execution context for itself.
Typedef SimpleCPU to SimpleCPUExecContext.
--HG--
extra : convert_revision : ecc445503bc585585da5663fe61796580e744da6
Added function to skip determine_cpu_caches(). We may have to update this in the
future: see note below.
arch/alpha/alpha_memory.cc:
dev/ide_ctrl.cc:
dev/tsunamireg.h:
Added ULL for 64bit ints
kern/linux/linux_system.cc:
Added a function to skip determine_cpu_caches, right now it is only used for
printing in proc, however in the future we may either want to implement the SC_CTL
IPR register or manually set alpha_l1i_cacheshape, alpha_l1d_cacheshape,
alpha_l2_cacheshape, alpha_l3_cacheshape to ((size << 10) | (linesize>>1)<<4 | way)
kern/linux/linux_system.hh:
added event to skip determine_cpu_caches()
--HG--
extra : convert_revision : 1065f2091bbe6832b730af490f5b4672c2afedce
arch/alpha/vtophys.cc:
Removed buggy code that tries to fix PAL addresses (may cause problems
while trying to debug in PAL code, but that should do this fix outside
of vtophys)
base/loader/symtab.cc:
base/loader/symtab.hh:
cpu/exetrace.cc:
Changed InstExec traces to always print a symbol name
dev/ide_ctrl.cc:
dev/ide_disk.cc:
Tabs
dev/ide_disk.hh:
Change buffer size
dev/tsunami_pchip.cc:
Fix translatePciToDma to support scatter gather mapping
kern/linux/linux_system.cc:
Force simulator to wait until remote debugger attaches (should be removed
or turned on/off with a flag)
--HG--
extra : convert_revision : 1d08aebe3f448c87a963dd613de3e2e0cff0d48d
Add support for generic visitors for stats and use them
to implement independent output functions.
Support for mysql output and some initial code for hacking
on mysql output with python
arch/alpha/pseudo_inst.cc:
base/hybrid_pred.cc:
base/hybrid_pred.hh:
base/sat_counter.cc:
base/sat_counter.hh:
cpu/simple_cpu/simple_cpu.cc:
kern/tru64/tru64_events.cc:
sim/main.cc:
sim/process.cc:
sim/process.hh:
sim/sim_events.cc:
sim/sim_object.cc:
sim/system.hh:
update for changes in stats package
base/statistics.cc:
move the python output code to base/stats/puthon.(cc|hh)
and reimplement it as a visitor.
move the text output code to base/stats/text.(cc|hh) and
reimplement it as a visitor.
move the database stuff into base/stats/statdb.(cc|hh) and
get rid of the class. Put everything as globals in the
Statistics::Database namespace.
allocate unique ids for all stats.
directly implement the check routine and get rid of the
various dumping routines since they're now in separate files.
make sure that no two stats have the same name
clean up some loops
base/statistics.hh:
major changes to the statistics package again
lots of code was factored out of statistics.hh into several
separate files in base/stats/ (this will continue)
There are now two Stat package types Result and Counter that
are specified to allow the user to keep the counted type
separate from the result type. They are currently both doubles
but that's an experiment. There is no more per stat ability to
set the type. Statistics::Counter is not the same as Counter!
Implement a visitor for statistics output so that new output
types can be implemented independently from the stats package
itself.
Add a unique id to each stat so that it can be used to keep
track of stats more simply. This number can also be used in
debugging problems with stats.
Tweak the bucket size stuff a bit to make it work better.
fixed VectorDist size bug
cpu/memtest/memtest.cc:
Fix up for changes in stats package
Don't use value() since it doesn't work with binning. If you
want a number as a stat, and to use it in the program itself,
you really want two separate variables, one that's a stat,
and one that's not.
cpu/memtest/memtest.hh:
Fix up for changes in stats package
test/Makefile:
Try to build stuff now that directories matter
test/stattest.cc:
test all new output types
choose which one with command line options
--HG--
extra : convert_revision : e3a3f5f0828c67c0e2de415d936ad240adaddc89
Also missed renames in a bunch of config files somehow.
(See previous changeset for list of renames.)
arch/alpha/alpha_memory.cc:
arch/alpha/ev5.cc:
arch/alpha/faults.hh:
cpu/exec_context.cc:
cpu/exec_context.hh:
cpu/simple_cpu/simple_cpu.hh:
More {Itb,Dtb} -> {ITB,DTB} renames (forgot to test build KERNEL).
--HG--
extra : convert_revision : b2c6ca0916b72b59895520fcacaf028667560a0d
configuration unnecessarily awkward. Biggest changes are:
- External and internal object names now match in all cases. The
macros still allow them to be different; the only reason I didn't
get rid of that is that the macros themselves should be going away
soon. In the few conflicting cases, I sometimes renamed the C++ object
and sometimes renamed the config object. The latter sets of substitions
are:
s/BaseBus/Bus/;
s/MemoryObject/FunctionalMemory/;
s/MemoryControl/MemoryController/;
s/FUPool/FuncUnitPool/;
- SamplingCPU is temporarily broken... we need to change the model
of how this works in the .ini file. Having it as a CPU proxy is
really awkward.
arch/alpha/alpha_memory.cc:
arch/alpha/alpha_memory.hh:
cpu/simple_cpu/simple_cpu.cc:
sim/process.cc:
Rename objects to match config name.
cpu/base_cpu.cc:
Uncomment SimObject define since SamplingCPU no longer
does this for us.
dev/ethertap.cc:
Use unsigned instead of uint16_t for params.
kern/tru64/tru64_system.cc:
Use unsigned instead of uint64_t for init_param param.
test/paramtest.cc:
Fix old SimObjectParam.
--HG--
extra : convert_revision : 378ebbc6a71ad0694501d09979a44d111a59e8dc
arch/alpha/isa_desc:
Need to return fault for copy operations.
cpu/exec_context.hh:
Add temporary storage to pass source address from copy load to copy store
cpu/simple_cpu/simple_cpu.cc:
Implement copy functions.
cpu/simple_cpu/simple_cpu.hh:
Return fault
--HG--
extra : convert_revision : 98e5ce563449d6057ba45c70eece9235f1649a90
