base/refcnt.hh:
reorganize the RefCountingPtr a little bit to make it easier
to derive from
dev/etherpkt.hh:
this doesn't belong here. use the inet.hh stuff
dev/ns_gige.cc:
dev/ns_gige.hh:
use newer features in the tcp/ip/ethernet stuff
--HG--
extra : convert_revision : 32c1953c95655c1f4c70e0d8adedfd94beead624
functions instead of preprocessor macros.
arch/alpha/vtophys.cc:
use new constants, functions and structs to clean up the
vtophys code.
arch/alpha/vtophys.hh:
Clean up a little bit and make the protypes match new changes.
base/remote_gdb.cc:
dev/ide_disk.cc:
kern/tru64/tru64_events.cc:
use new constants from isa_traits.hh instead of ones from
old pmap.h
--HG--
extra : convert_revision : 5dce34e3b0c84ba72cefca34e5999b99898edcef
never clear about whether the end of the range was inclusive
or exclusive. Make it inclusive, but also provide a RangeSize()
function that will generate a Range based on a start and a size.
This, in combination with using the comparison operators, makes
almost all usages of the range not care how it is stored.
base/range.cc:
Make the end of the range inclusive.
start/end -> first/last
(end seems too much like end() in stl)
base/range.hh:
Make the end of the range inclusive.
Fix all comparison operators so that they work correctly with
an inclusive range. Also, when comparing one range to another
with <, <=, >, >=, we only look at the beginning of the range
beacuse x <= y should be the same as x < y || x == y. (This wasn't
the case before.)
Add a few functions for making a range:
RangeSize is start and size
RangeEx is start and end where end is exclusive
RangeIn is start and end where end is inclusive
start/end -> first/last
(end seems too much like end() in stl)
dev/alpha_console.cc:
dev/baddev.cc:
dev/ide_ctrl.cc:
dev/ns_gige.cc:
dev/pciconfigall.cc:
dev/pcidev.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart.cc:
Use the RangeSize function to create a range.
--HG--
extra : convert_revision : 29a7eb7fce745680f1c77fefff456c2144bc3994
No more non-intuitive behavior shifts depending on whether
outputDirectory is set (at the expense of backwards compatibility).
outputDirectory is now always valid, defaults to ".".
dev/etherdump.cc:
Use makeOutputStream() to create output file.
New behavior: actually complain if dump file can't
be opened, instead of quietly ignoring the problem.
dev/etherdump.hh:
dev/simconsole.cc:
dev/simconsole.hh:
Use makeOutputStream() to create output file.
sim/builder.cc:
sim/builder.hh:
sim/main.cc:
builderStream() is now *configStream.
sim/serialize.cc:
outputDirectory is now always valid, no need to check.
sim/universe.cc:
Clean up/standardize handling of various output files.
No more non-intuitive behavior shifts depending on whether
outputDirectory is set (at the expense of backwards compatibility).
outputDirectory is now always valid, defaults to ".".
New function makeOutputStream() does "the right thing" to
associate a stream with a filename.
--HG--
extra : convert_revision : a03c58c547221b3906e0d6f55e4a569843f2d646
arch/alpha/vtophys.cc:
PGOFSET -> ALPHA_PGOFSET to avoid include file problems
base/callback.hh:
Added a class to create a callback from a function
base/intmath.hh:
make FloorLog2 inlined
dev/pcidev.cc:
more work in getting pciconfig space happy with different endiannesses
dev/uart.cc:
used an incorrect size for write uint64_t instead of uint8_t
sim/system.cc:
when writing things into system data structures we need to pay
attention to endianness
--HG--
extra : convert_revision : 52f441b5789c45db30ef2f6fd4975cbc7323a381
base/inet.hh:
add functions to the various headers to grab the most common
encapsulated protocols. This could easily get out of hand, but
we're just worrying about tcp, udp, and ip for now.
add common functions size(), bytes(), and payload() to all wrappers.
size() gets the header size
bytes() returns a uint8_t * to the beginning of the header
payload() returns a uint8_t * to the beginning of the payload.
dev/etherpkt.cc:
dev/etherpkt.hh:
don't cache pointers to headers. It's probably not worth the
hassle.
--HG--
extra : convert_revision : ba9df85ac019b8a48233042dde79fb9da9546410
libdnet when we can instead of our own home grown stuff.
SConscript:
separate the crc code into its own file
base/inet.cc:
move the crc stuff to crc.cc
add generic code for calculating ip/tcp/udp checksums
base/inet.hh:
- move crc stuff to crc.hh
- #include all of the libdnet stuff. (this makes base/inet.hh the
only file you need to include if you want to use this kind of stuff.)
- Wrap some of the libdnet structs to get easier access to structure
members. These wrappers will automatically deal with masking/shifting/
byte-swapping.
base/refcnt.hh:
If one derives from RefCountingPtr, they should have access to
the internal data pointer.
build/SConstruct:
make #include of dnet stuff work
dev/etherlink.cc:
dev/ethertap.cc:
dev/ethertap.hh:
EtherPacket -> PacketData
dev/etherpkt.cc:
EtherPacket -> PacketData
add a function for populating extra info about a packet.
Basically just gives pointers to ethernet/ip/tcp/udp headers
if they exist.
dev/etherpkt.hh:
EtherPacket -> PacketData
remove most of the packet header stuff from teh PacketData
class and just add a few generic functions for grabbing various
headers that may exist in the packet. The old functionality is
contained in the headers.
dev/ns_gige.cc:
- IP -> Ip, UDP -> Udp, TCP ->Tcp when used in variable names
- get rid of our own byte swapping functions.
- whack checksum code and use libdnet version.
- Get pointers to the various packet headers and grab info from
those headers. (The byte swapping in the headers now.)
- Add stats for Udp Checksums
dev/ns_gige.hh:
use libdnet for checksum code.
IP -> Ip, TCP -> Tcp in variable names
add stats for UDP checksums
--HG--
extra : convert_revision : 96c4160e1967b7c0090acd456df4a76e1f3aab53
dev/tsunami_cchip.cc:
updates to ipi handling chipset code
sim/system.cc:
debugSymbolTable, now has symbols from pal, console, and linux
--HG--
extra : convert_revision : c981d857f7e3d75f4c46172809e6d14e5f0a1238
dev/ns_gige.cc:
clean up the interrupt handling code so that it is simpler and
less prone to bugs. I hope I removed the bug where the:
assert(intrTick >= curTick || intrTick == 0); would get triggered.
I'm pretty sure that was due to intrTick not being cleared when
the interrupt was cleared.
This code probably still needs to be looked at more closely to
make sure interrupts are not missed.
--HG--
extra : convert_revision : 61e2eb043540f2534a80c9b633006a71e7d6e282
dev/ns_gige.cc:
Clean up the interrupt code. Do a better job determining when
coalescing should happen.
Remove some bogus comments
Stop using magic numbers in initialization and comment what
the various numbers do
dev/ns_gige_reg.h:
#define describing which interrupts cannot be delayed and
which interrrupts we don't implement
--HG--
extra : convert_revision : eb196afa0bf448e1849dd2bd30dde32134effee7
dev/ns_gige.cc:
Make all DPRINTF statements take one line. If they need two lines,
break them up into separate statements. This makes grep much more
effective since *every* line will be prefixed by the cycle that the
trace message is from and the object that caused the message.
normalize some debugging statements so that searching is easier
(e.g. always say rxState, not rx state or receive state)
break into the debugger when a packet is dropped since we don't really
like dropping packets.
--HG--
extra : convert_revision : 9cf309ca2143a6b8c8215ac5dd6a31aae60173cd
whether or not the state machine is enabled rather than tracking the
specific instance of trying to halt the state machine.
dev/ns_gige.cc:
change back to tracking the state machine's enableness instead of
whether or not it is trying to halt. Also fix a major bug that
would cause the NIC to drop packets when the rx state machine was
idle, but enabled.
Fix a couple other bugs in the state machine where the idle interrupt
would happen at the wrong time.
Add a warning to deal with improper values of intrTick
dev/ns_gige.hh:
We need to keep track of whether the state machine is enabled
or not separately from the control register since the bits don't
always reflect the truth.
--HG--
extra : convert_revision : 20056b225fa62a0744473babfd693506aa5f29b2
machine too. The fifo may have been full and we want
to get another packet into it if we can.
--HG--
extra : convert_revision : 8f57294bd18f5eccb900118f2de83a4ccfd20dbb
and actually default to only storing a max of 96 bytes per
packet since that should be plenty to fit all of the headers in.
--HG--
extra : convert_revision : 0c4a6571d80536477ed166e695d957e39da0334e
argh!
dev/ns_gige.cc:
Exit the state machine so that we don't come right back where
we started and enter an infinite loop.
--HG--
extra : convert_revision : a5f2b5b5a692de6c80e4b02d7f9bc5d27fe17252
ticks for the most commonly accessed devices.
dev/baddev.cc:
Get rid of the constant cache access latency.
For unimportant devices, don't add any latency.
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ns_gige.cc:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/tsunami_cchip.cc:
dev/tsunami_cchip.hh:
dev/tsunami_io.cc:
dev/tsunami_io.hh:
dev/tsunami_pchip.cc:
dev/tsunami_pchip.hh:
dev/uart.cc:
dev/uart.hh:
make the cache access latency a parameter that is based on bus
ticks.
dev/io_device.cc:
dev/io_device.hh:
add an io latency variable
dev/ns_gige.hh:
this moved to io_device.hh
--HG--
extra : convert_revision : 4883130feeaef48abee492eddf0b8eb40eb94789
dev/ns_gige.cc:
make tx/rx fifo sizes a param. the default is 128K for each. also, make the state machine not move onto txFragRead if there is no room in the txfifo for data.
dev/ns_gige.hh:
make tx/rx fifo size a param
--HG--
extra : convert_revision : ed91eb31c2b21d4cdc6de87d8641df6197be5209
second translation (which is superfluous) doesn't work properly when
system memory is higher than 128MB
--HG--
extra : convert_revision : 9cdf6925689d376953b1aa071bcd1e2f06419202
dev/ns_gige.cc:
tell all outgoing dma events that this request is from the NIC
--HG--
extra : convert_revision : 62af17a2728a0ff729e7723dc29bd0d130ca5fe3
dev/ns_gige.cc:
transmit side checksum offloading doesn't need pseudo header generation, it just takes the pseudo header checksum and uses it.
--HG--
extra : convert_revision : 9741bd650415c18ed37b06a453b23610d028135b
Both rx/tx interrupts are now scheduled for the future to give the
linux kernel time to get out of its loop.
--HG--
extra : convert_revision : 8fee0a25fde0ce0545c924f8547bed460602e006
base/loader/elf_object.cc:
EM_ALPHA value isn't official, so perhaps we shouldn't use it
dev/alpha_console.cc:
dev/alpha_console.hh:
this change allows the use of old console code
--HG--
extra : convert_revision : cfacd64ae7fd2595158ca1a83ebcdb66ee7e119b
base/traceflags.py:
removed TsunamiUart/TlaserUart and added a plain Uart
dev/alpha_console.cc:
updated for new simconsole
dev/platform.hh:
added a uart member to platform
dev/simconsole.cc:
dev/simconsole.hh:
removed lots of legacy code, it should all be ours now.
converted tabs to 8 spaces
added our copyright
dev/tsunami.cc:
uses simconsole.hh rather than console.hh
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
never needed console.hh
dev/tsunami_io.hh:
this does need eventq.hh and it just happend to be working whenn console.hh was
included everywhere
dev/tsunamireg.h:
added a couple more 8250/16550 uart defines
dev/uart.cc:
new uart code, rewritten to support both tlaser and tsunami (both a 8250 and 8530
uart).
dev/uart.hh:
updated for new uart, legacy code removed
--HG--
rename : dev/console.cc => dev/simconsole.cc
rename : dev/console.hh => dev/simconsole.hh
rename : dev/tsunami_uart.cc => dev/uart.cc
rename : dev/tsunami_uart.hh => dev/uart.hh
extra : convert_revision : e663352d49d4c2d3c95643030cf73c0e85ba2f08
base/intmath.hh:
only need FloorLog2(size_t) on a mac, so ifdefed for this
dev/alpha_console.cc:
Actually allocate the alphaAccess struct.
--HG--
extra : convert_revision : 1f50b1a025c8ee728a9f3d2c603ea38347234f54
dev/alpha_console.cc:
rather than acessing a byte array for alpha access, access the members
**this requires an updated console**
dev/pcidev.cc:
correctly type all the pci data and store in in little endian no
matter what system we are on
dev/tsunami_uart.cc:
correct a bug with the data type.
kern/linux/linux_system.cc:
system type in hwprb needs to be endian happy as well.
--HG--
extra : convert_revision : 8de9bb69365b5d30fceaf4fa342a1639f92d7a83
base/traceflags.py:
added some more traceflags for ethernet to break it up better
dev/etherpkt.hh:
since we are not network host order, must reverse bytes for these typechecks.
also, overload isTcp/UdpPkt to take an argument so you don't have to reget the ip header if you've already got one.
dev/ns_gige.cc:
1) add some functions that reverse Endianness so we can generate adn evaluate checksum adn dprintf data accurately/more understandably
2) forget about the implementation of fifo fill/drain thresholds, it's not used by the driver much, nor does it matter with use sending/receiving in whole packets anyway.
get rid of teh associated variables.
3) get rid of txFifoCnt the variable, it's redundant and unnecessary, just use txFifoAvail.
4) change io_enable to ioEnable, just to be picky.
5) modify some DPRINTF's to be clearer, also added a lot, and spread them into better traceflag categories
6) fix the device bug! it's the intrTick = 0 at teh beginning of cpuInterrupt().
7) clear some bools in regsReset() so they don't holdover wrong state
8) fix pseudo header generation for Tcp checksumming to account for network order
dev/ns_gige.hh:
change io_enable to ioEnable, get rid of fill/drain thresh related variables and txFifoCnt, which is redundant
--HG--
extra : convert_revision : c538b75731f3c9e04354f57e6df9a40aeca5096d
base/inifile.cc:
Added mac os support and fixed a bug, on error we need to exit the
child process not return
base/intmath.hh:
gcc on macos wanted a seperate function for the size_t type
base/loader/elf_object.cc:
I'm not sure why this works under linux because it seems to return
the wrong value.
base/stats/text.cc:
added define/include for mac os x
cpu/exec_context.hh:
cpu/simple_cpu/simple_cpu.cc:
added endian conversion code
dev/alpha_console.cc:
rather than accessing a charecter array of varying size depending on
the access, lets actually do this properly.
dev/alpha_console.hh:
get rid of now nolonger used consoleData
dev/disk_image.cc:
We have to byte swap the data is some cases, added function to do that
dev/ethertap.cc:
added preproc directive for mac os
--HG--
extra : convert_revision : 2b5685765cfa2844926d7397f363d2788e3d640a
tests
dev/ide_ctrl.cc:
Formatting
dev/ide_disk.cc:
Remove some junk, add an assert to serialize, and add missing serialize
for command register.
--HG--
extra : convert_revision : 8f99857e32f278dd4e6f23deffc8047c6411d5b2
