arch/alpha/isa/decoder.isa:
Mark store conditionals as serializing. This is slightly higher over head than they truly have in the 264, but it's close. Normally they block any other instructions from entering the IQ until the IQ is empty. This is higher overhead because it waits until the ROB is empty.
Also mark RPCC as unverifiable. The checker will just grab the value from the instruction and assume it's correct.
cpu/static_inst.hh:
Add unverifiable flag, specifically for the CheckerCPU.
--HG--
extra : convert_revision : cbc34d1f2f5b07105d31d4bd8f19edae2cf8158e
arch/alpha/isa/decoder.isa:
Make IPR accessing instructions serializing so they are not issued incorrectly in the O3 model.
arch/alpha/isa/pal.isa:
Allow IPR instructions to have flags.
base/traceflags.py:
Include new trace flags from the two new CPU models.
cpu/SConscript:
Create the templates for the split mem accessor methods. Also include the new files from the new models (the Ozone model will be checked in next).
cpu/base_dyn_inst.cc:
cpu/base_dyn_inst.hh:
Update to the BaseDynInst for the new models.
--HG--
extra : convert_revision : cc82db9c72ec3e29cea4c3fdff74a3843e287a35
The major change is renaming the old ExecContext to CPUExecContext, and creating two new classes, ExecContext (an abstract class), and ProxyExecContext (a templated class that derives from ExecContext).
Code outside of the CPU continues to use ExecContext as normal (other than not being able to access variables within the XC). The CPU uses the CPUExecContext, or however else it stores its own state. It then creates a ProxyExecContext, templated on the class used to hold its state. This proxy is passed to any code outside of the CPU that needs to access the XC. This allows code outside of the CPU to use the ExecContext interface to access any state needed, without knowledge of how that state is laid out.
Note that these changes will not compile without the accompanying revision to automatically rename the shadow registers.
SConscript:
Include new file, cpu_exec_context.cc.
arch/alpha/alpha_linux_process.cc:
arch/alpha/alpha_memory.cc:
arch/alpha/alpha_tru64_process.cc:
arch/alpha/arguments.cc:
arch/alpha/isa/decoder.isa:
arch/alpha/stacktrace.cc:
arch/alpha/vtophys.cc:
base/remote_gdb.cc:
cpu/intr_control.cc:
Avoid directly accessing objects within the XC.
arch/alpha/ev5.cc:
Avoid directly accessing objects within the XC.
KernelStats have been moved to the BaseCPU instead of the XC.
arch/alpha/isa_traits.hh:
Remove clearIprs(). It wasn't used very often and it did not work well with the proxy ExecContext.
cpu/base.cc:
Place kernel stats within the BaseCPU instead of the ExecContext.
For now comment out the profiling code sampling until its exact location is decided upon.
cpu/base.hh:
Kernel stats are now in the BaseCPU instead of the ExecContext.
cpu/base_dyn_inst.cc:
cpu/base_dyn_inst.hh:
cpu/memtest/memtest.cc:
cpu/memtest/memtest.hh:
Changes to support rename of old ExecContext to CPUExecContext. See changeset for more details.
cpu/exetrace.cc:
Remove unneeded include of exec_context.hh.
cpu/intr_control.hh:
cpu/o3/alpha_cpu_builder.cc:
Remove unneeded include of exec_context.hh
cpu/o3/alpha_cpu.hh:
cpu/o3/alpha_cpu_impl.hh:
cpu/o3/cpu.cc:
cpu/o3/cpu.hh:
cpu/simple/cpu.cc:
cpu/simple/cpu.hh:
Changes to support rename of old ExecContext to CPUExecContext. See changeset for more details.
Also avoid accessing anything directly from the XC.
cpu/pc_event.cc:
Avoid accessing objects directly from the XC.
dev/tsunami_cchip.cc:
Avoid accessing objects directly within the XC>
kern/freebsd/freebsd_system.cc:
kern/linux/linux_system.cc:
kern/linux/linux_threadinfo.hh:
kern/tru64/dump_mbuf.cc:
kern/tru64/tru64.hh:
kern/tru64/tru64_events.cc:
sim/syscall_emul.cc:
sim/syscall_emul.hh:
Avoid accessing objects directly within the XC.
kern/kernel_stats.cc:
kern/kernel_stats.hh:
Kernel stats no longer exist within the XC.
kern/system_events.cc:
Avoid accessing objects directly within the XC. Also kernel stats are now in the BaseCPU.
sim/process.cc:
sim/process.hh:
Avoid accessing regs directly within an ExecContext. Instead use a CPUExecContext to initialize the registers and copy them over.
cpu/cpu_exec_context.cc:
Rename old ExecContext to CPUExecContext. This is used by the old CPU models to store any necessary architectural state. Also include the ProxyExecContext, which is used to access the CPUExecContext's state in code outside of the CPU.
cpu/cpu_exec_context.hh:
Rename old ExecContext to CPUExecContext. This is used by the old CPU models to store any necessary architectural state. Also include the ProxyExecContext, which is used to access the CPUExecContext's state in code outside of the CPU.
Remove kernel stats from the ExecContext.
sim/pseudo_inst.cc:
Kernel stats now live within the CPU.
Avoid accessing objects directly within the XC.
--HG--
rename : cpu/exec_context.cc => cpu/cpu_exec_context.cc
rename : cpu/exec_context.hh => cpu/cpu_exec_context.hh
extra : convert_revision : a75393a8945c80cca225b5e9d9c22a16609efb85
The shadow registers are folded into the normal integer registers to ease renaming indexing.
Include the removed Opcdec class of instructions for faulting when a pal mode only instruction is decoded in non-pal mode.
arch/alpha/ev5.cc:
Changes to automatically map the shadow registers if the instruction is in PAL mode.
arch/alpha/isa/branch.isa:
arch/alpha/isa/decoder.isa:
arch/alpha/isa/fp.isa:
arch/alpha/isa/int.isa:
arch/alpha/isa/mem.isa:
arch/alpha/isa/pal.isa:
arch/alpha/isa/unimp.isa:
Changes for automatically using the shadow registers. Now instructions must decode based on an ExtMachInst, which is a MachInst with any decode context information concatenated onto the higher order bits.
arch/alpha/isa/main.isa:
Changes for automatically using the shadow registers. Now instructions must decode based on an ExtMachInst, which is a MachInst with any decode context information concatenated onto the higher order bits.
The decoder (for Alpha) uses the 32nd bit in order to determine if the machine is in PAL mode. If it is, then it refers to the reg_redir table to determine the true index of the register it is using.
Also include the opcdec instruction definition.
arch/alpha/isa_traits.hh:
Define ExtMachInst type that is used by the static inst in order to decode the instruction, given the context of being in pal mode or not.
Redefine the number of Int registers, splitting it into NumIntArchRegs (32) and NumIntRegs (32 + 8 shadow registers).
Change the dependence tags to reflect the integer registers include the 8 shadow registers.
Define function to make an ExtMachInst. Currently it is somewhat specific to Alpha; in the future it must be decided to make this more generic and possibly slower, or leave it specific to each architecture and ifdef it within the CPU.
arch/isa_parser.py:
Have static insts decode on the ExtMachInst.
base/remote_gdb.cc:
Support the automatic remapping of shadow registers. Remote GDB must now look at the PC being read in order to tell if it should use the normal register indices or the shadow register indices.
cpu/o3/regfile.hh:
Comment out the pal registers; they are now a part of the integer registers.
cpu/simple/cpu.cc:
Create an ExtMachInst to decode on, based on the normal MachInst and the PC of the instructoin.
cpu/static_inst.hh:
Change from MachInst to ExtMachInst to support shadow register renaming.
--HG--
extra : convert_revision : 1d23eabf735e297068e1917445a6348e9f8c88d5
This changeset removes a check that prevents quiescing when an
interrupt is pending. *** You should only call quiesce if that
isn't a problem. ***
arch/alpha/isa/decoder.isa:
sim/pseudo_inst.cc:
sim/pseudo_inst.hh:
Add quiesceNs, quiesceCycles, quisceTime and m5panic pseudo ops.
These quiesce for a number of ns, cycles, report how long
we were quiesced for, and panic the simulator respectively.
The latter is added to the panic() function in the console and linux
kernel instead of executing an infinite loop until someone notices.
cpu/exec_context.cc:
cpu/exec_context.hh:
Add a quiesce end event to the execution contexted which upon
executing wakes up a CPU for quiesceCycles/quiesceNs.
util/m5/Makefile:
Make the makefile more reasonable
util/m5/m5.c:
update the m5op executable to use the files from the linux tree
util/m5/m5op.S:
update m5op.S from linux tree
util/m5/m5op.h:
update m5op.h from linux tree
--HG--
rename : util/m5/m5op.s => util/m5/m5op.S
extra : convert_revision : 3be18525e811405b112e33f24a8c4e772d15462d
They are now accessed by calling readMiscReg()/setMiscReg() on the XC. Old IPR accesses are supported by using readMiscRegWithEffect() and setMiscRegWithEffect() (names may change in the future).
arch/alpha/alpha_memory.cc:
Change accesses to IPR to go through the XC.
arch/alpha/ev5.cc:
Change accesses for IPRs to go through the misc regs.
arch/alpha/isa/decoder.isa:
Change accesses to IPRs to go through the misc regs. readIpr() and setIpr() are now changed to calls to readMiscRegWithEffect() and setMiscRegWithEffect().
arch/alpha/isa/fp.isa:
Change accesses to IPRs and Fpcr to go through the misc regs.
arch/alpha/isa/main.isa:
Add support for all misc regs being accessed through readMiscReg() and setMiscReg(). Instead of readUniq and readFpcr, they are replaced by calls with Uniq_DepTag and Fpcr_DepTag passed in as the register index.
arch/alpha/isa_traits.hh:
Change the MiscRegFile to a class that handles all accesses to MiscRegs, which in Alpha include the FPCR, Uniq, Lock Addr, Lock Flag, and IPRs.
Two flavors of accesses are supported: normal register reads/writes, and reads/writes with effect. The latter are basically the original read/write IPR functions, while the former are normal reads/writes.
The lock flag and lock addr registers are added to the dependence tags in order to support being accessed through the misc regs.
arch/alpha/stacktrace.cc:
cpu/simple/cpu.cc:
dev/sinic.cc:
Change accesses to the IPRs to go through the XC.
arch/alpha/vtophys.cc:
Change access to the IPR to go through the XC.
arch/isa_parser.py:
Change generation of code for control registers to use the readMiscReg and setMiscReg functions.
base/remote_gdb.cc:
Change accesses to the IPR to go through the XC.
cpu/exec_context.hh:
Use the miscRegs to access the lock addr, lock flag, and other misc registers.
cpu/o3/alpha_cpu.hh:
cpu/simple/cpu.hh:
Support interface for reading and writing misc registers, which replaces readUniq, readFpcr, readIpr, and their set functions.
cpu/o3/alpha_cpu_impl.hh:
Change accesses to the IPRs to go through the miscRegs.
For now comment out some of the accesses to the misc regs until the proxy exec context is completed.
cpu/o3/alpha_dyn_inst.hh:
Change accesses to misc regs to use readMiscReg and setMiscReg.
cpu/o3/alpha_dyn_inst_impl.hh:
Remove old misc reg accessors.
cpu/o3/cpu.cc:
Comment out old misc reg accesses until the proxy exec context is completed.
cpu/o3/cpu.hh:
Change accesses to the misc regs.
cpu/o3/regfile.hh:
Remove old access methods for the misc regs, replace them with readMiscReg and setMiscReg. They are dummy functions for now until the proxy exec context is completed.
kern/kernel_stats.cc:
kern/system_events.cc:
Have accesses to the IPRs go through the XC.
kern/tru64/tru64.hh:
Have accesses to the misc regs use the new access methods.
--HG--
extra : convert_revision : e32e0a3fe99522e17294bbe106ff5591cb1a9d76
arch/alpha/alpha_memory.cc:
arch/alpha/isa/decoder.isa:
Added news where faults are created.
arch/alpha/ev5.cc:
Changed places where a fault was compared to a fault type to use isA rather than ==
arch/alpha/faults.cc:
arch/alpha/faults.hh:
Changed Fault to be a RefCountingPtr
arch/alpha/isa/fp.isa:
Added a new where a FloatEnableFault was created.
arch/alpha/isa/unimp.isa:
arch/alpha/isa/unknown.isa:
Added a new where an UnimplementedFault is created.
base/refcnt.hh:
Added include of stddef.h for the NULL macro
cpu/base_dyn_inst.cc:
Added a new where an UnimplementedOpcodeFault is created.
cpu/o3/alpha_cpu_impl.hh:
Changed places where a fault was compared to a fault type to use isA rather than ==. Also changed fault->name to fault->name()
cpu/o3/regfile.hh:
Added new where UnimplementedOpcodeFaults are created.
cpu/simple/cpu.cc:
Changed places where a fault was compared to a fault type to use isA rather than ==. Also added a new where an Interrupt fault is created.
dev/alpha_console.cc:
Added news where MachineCheckFaults are created.
dev/pcidev.hh:
Added news where MachineCheckFaults are generated.
dev/sinic.cc:
Changed places where a fault was compared to a fault type to use isA rather than ==. Added news where MachineCheckFaults are created. Fixed a problem where m5.fast had unused variables.
kern/kernel_stats.cc:
Commented out where _faults is initialized. This statistic will probably be moved elsewhere in the future.
kern/kernel_stats.hh:
Commented out the declaration of _fault. when fault() is called, the fault increments its own stat.
sim/faults.cc:
sim/faults.hh:
Changed Fault from a FaultBase * to a RefCountingPtr.
--HG--
extra : convert_revision : b40ccfc42482d5a115e111dd897fa378d23c6c7d
SConscript:
The new faults.cc file in sim allocates the system wide faults. When these faults are generated through a function interface in the ISA, this file may go away.
arch/alpha/alpha_memory.cc:
Changed Fault to Fault * and took the underscores out of fault names.
arch/alpha/alpha_memory.hh:
Changed Fault to Fault *. Also, added an include for the alpha faults.
arch/alpha/ev5.cc:
Changed the fault_addr array into a fault_addr function. Once all of the faults can be expected to have the same type, fault_addr can go away completely and the info it provided will come from the fault itself. Also, Fault was changed to Fault *, and underscores were taken out of fault names.
arch/alpha/isa/decoder.isa:
Changed Fault to Fault * and took the underscores out fault names.
arch/alpha/isa/fp.isa:
Changed Fault to Fault *, and took the underscores out of fault names.
arch/alpha/isa/main.isa:
Changed Fault to Fault *, removed underscores from fault names, and made an include of the alpha faults show up in all the generated files.
arch/alpha/isa/mem.isa:
Changed Fault to Fault * and removed underscores from fault names.
arch/alpha/isa/unimp.isa:
arch/alpha/isa/unknown.isa:
cpu/exec_context.hh:
cpu/ozone/cpu.hh:
cpu/simple/cpu.cc:
dev/alpha_console.cc:
dev/ide_ctrl.cc:
dev/isa_fake.cc:
dev/pciconfigall.cc:
dev/pcidev.cc:
dev/pcidev.hh:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
Changed Fault to Fault *, and removed underscores from fault names.
arch/alpha/isa_traits.hh:
Changed the include of arch/alpha/faults.hh to sim/faults.hh, since the alpha faults weren't needed.
cpu/base_dyn_inst.cc:
Changed Fault to Fault *, and removed underscores from fault names. This file probably shouldn't use the Unimplemented Opcode fault.
cpu/base_dyn_inst.hh:
Changed Fault to Fault * and took the underscores out of the fault names.
cpu/exec_context.cc:
cpu/o3/alpha_dyn_inst.hh:
cpu/o3/alpha_dyn_inst_impl.hh:
cpu/o3/fetch.hh:
dev/alpha_console.hh:
dev/baddev.hh:
dev/ide_ctrl.hh:
dev/isa_fake.hh:
dev/ns_gige.hh:
dev/pciconfigall.hh:
dev/sinic.hh:
dev/tsunami_cchip.hh:
dev/tsunami_io.hh:
dev/tsunami_pchip.hh:
dev/uart.hh:
dev/uart8250.hh:
Changed Fault to Fault *.
cpu/o3/alpha_cpu.hh:
Changed Fault to Fault *, removed underscores from fault names.
cpu/o3/alpha_cpu_impl.hh:
Changed Fault to Fault *, removed underscores from fault names, and changed the fault_addr array to the fault_addr function. Once all faults are from the ISA, this function will probably go away.
cpu/o3/commit_impl.hh:
cpu/o3/fetch_impl.hh:
dev/baddev.cc:
Changed Fault to Fault *, and removed underscores from the fault names.
cpu/o3/regfile.hh:
Added an include for the alpha specific faults which will hopefully go away once the ipr stuff is moved, changed Fault to Fault *, and removed the underscores from fault names.
cpu/simple/cpu.hh:
Changed Fault to Fault *
dev/ns_gige.cc:
Changed Fault to Fault *, and removdd underscores from fault names.
dev/sinic.cc:
Changed Fault to Fault *, and removed the underscores from fault names.
dev/uart8250.cc:
Chanted Fault to Fault *, and removed underscores from fault names.
kern/kernel_stats.cc:
Removed underscores from fault names, and from NumFaults.
kern/kernel_stats.hh:
Changed the predeclaration of Fault from an enum to a class, and changd the "fault" function to work with the classes instead of the enum. Once there are no system wide faults anymore, this code will simplify back to something like it was originally.
sim/faults.cc:
This allocates the system wide faults.
sim/faults.hh:
This declares the system wide faults.
sim/syscall_emul.cc:
sim/syscall_emul.hh:
Removed the underscores from fault names.
--HG--
rename : arch/alpha/faults.cc => sim/faults.cc
rename : arch/alpha/faults.hh => sim/faults.hh
extra : convert_revision : 253d39258237333ae8ec4d8047367cb3ea68569d
SConscript:
Moved pseudo_inst.hh from targetarch to full system sources
arch/alpha/SConscript:
Moved pseudo_inst.cc out of the alpha specific sources
arch/alpha/isa/decoder.isa:
The decoder now pulls out the arguments for the pseudo instructions based on the alpha ABI
arch/alpha/isa/main.isa:
Registers 16, 17 and 18 are used to get parameters for the pseudo instructions and can be referred to explicitly
sim/pseudo_inst.cc:
Changed some include paths to reflect that pseudo_inst.hh is now outside of the alpha directory. Also, instead of extracting their parameters directly, they're passed in as regular function arguments.
sim/pseudo_inst.hh:
Changed the function prototypes to include the functions parameters, now that they aren't extracted from the execution context.
--HG--
rename : arch/alpha/pseudo_inst.cc => sim/pseudo_inst.cc
rename : arch/alpha/pseudo_inst.hh => sim/pseudo_inst.hh
extra : convert_revision : 76ce768cf1d8a838aa7b64878a7ab4c4215ac999
instruction format functions in ISA description language.
Take advantage of these features to clean up memory
instruction definitions in Alpha.
arch/alpha/isa/decoder.isa:
arch/alpha/isa/mem.isa:
arch/alpha/isa/pal.isa:
Take advantage of new keyword parameters to disambiguate
instruction vs. memory-request flags, and to provide
a default EA calculation for memory ops (since 99% of them
are the same).
arch/isa_parser.py:
Add two new features to instruction format functions:
- Keyword parameters, a la Python.
- List-valued arguments.
Also export makeList() function to Python code blocks,
as this is handy for dealing with flags.
--HG--
extra : convert_revision : 99bbbaa2e765230aa96b6a06ed193793325f9fb0
Should enable implementation of split-phase timing loads
with new memory model.
May create slight timing differences under FullCPU, as I
believe we were not handling software prefetches correctly
before when the split MemAcc/Exec model was used. I haven't
looked into this in any detail though.
arch/alpha/isa/decoder.isa:
HwLoadStore format split into separate HwLoad and
HwStore formats.
Copy instructions now fall under MiscPrefetch format.
Mem_write_result is now just write_result in store
conditionals.
arch/alpha/isa/mem.isa:
Split MemAccExecute and LoadStoreExecute templates
into separate templates for loads and stores; now
that memory operands are handled differently from
registers, it's impossible to have a single template
serve both.
Also unified the handling of "regular" prefetches
(loads to r31) and "misc" prefetches (e.g., wh64)
under the new scheme. It looks like SW prefetches
were not handled correctly in FullCPU up til now,
since we generated an execute() method for the outer
instruction but didn't generate a proper method for
MemAcc::execute() (instead getting a default no-op
method for that).
arch/alpha/isa/pal.isa:
Split HwLoadStore into separate HwLoad and HwStore
formats to select proper template (see change to
mem.isa in this changeset).
arch/isa_parser.py:
Stop trying to treat memory operands like register
operands, since we never used them in a uniform way
anyway, and it made it impossible to do split-phase
loads as needed for the new CPU model. Now there's no
more 'op_mem_rd', 'op_nonmem_rd', etc.: 'op_rd' just does
register operands, and the template code is responsible
for formulating the call to the memory system. Right now
the only thing exported by InstObjParams is a new attribute
'mem_acc_size' which gives the memory access size in bits,
though more attributes can be added if needed.
Also moved code in findOperands() method to
OperandDescriptorList.__init__(), which is where it belongs.
--HG--
extra : convert_revision : 6d53d07e0c5e828455834ded4395fa40f9146a34
(thanks to Gabe's include feature!).
arch/alpha/isa/main.isa:
Split out into multiple .isa files.
--HG--
extra : convert_revision : 30d8edf74ea194d4a208febf1e66edc72a7dbd5d
